Water Oxidation Catalysis by Mono- and Binuclear Iron Corroles

Electrochemical water oxidation reaction by dinuclear Re(V) oxo complexes with a 1,4-benzoquinone core via the redox induced electron transfer (RIET) process

We report two dinuclear rhenium(V) oxo complexes 1 and 2 types, [ReV(O)(Cl)3(L2-)ReV(O)(Cl)3][NBu4]2 (1, L2- = dianionic 2,5-dihydroxy 1,4-benzoquinone (DBQ2-)) and (2, L2- = dianionic chloranilic acid (CA2-) ligands), as a homogeneous electrocatalyst for water oxidation reactions in the acetonitrile-water mixture. The evolution of dioxygen gas at the anode was confirmed by a GC-TCD study. In controlled potential electrolysis (CPE), oxidation at 1.30 V (vs. Ag/AgCl) at neutral pH, 1 and 2 afforded 1+ [ReVI(O)(Cl)3(DBQ˙3-)ReVI(O)(Cl)3]- and 2+ [ReVI(O)(Cl)3(CA˙3-)ReVI(O)(Cl)3]- ions, respectively, via the redox induced electron transfer (RIET) process. Electrochemically generated species of 1+ and 2+ could be isolated in dry acetonitrile. 1+ and 2+ ions give strong EPR signals in fluid solution as well as under frozen glass conditions due to the [ReVI(O)(Cl)3(L˙3-)ReVI(O)(Cl)3]- ↔ [ReVI(O)(Cl)3(L2-)ReV(O)(Cl)3]- (where L2- = DBQ2- and CA2-) equilibrium. However, the continuation of the CPE study (1.30 V vs. Ag/AgCl) in the presence of acetonitrile-water mixture oxidised the in situ generated species of 1+ and 2+ to higher valent ReVIO species. These species (1+ and 2+) bound water through the water nucleophilic attack (WNA) to produce peroxide intermediate species of [ReV(OOH)(Cl)3(DBQ2-)ReV(OOH)(Cl)3] (A1) and [ReV(OOH)(Cl)3(CA2-)ReV(OOH)(Cl)3] (A2) for catalysts 1 and 2, respectively. Interestingly, A1 and A2 were authenticated and analysed by ESI mass spectrometry and infrared spectroscopy and were the active precursors of this water oxidation process. The extent of current generation under similar conditions suggested that complex 1 is superior to complex 2 for the water oxidation reaction. Notably, the maximum turnover frequency (TOFmax) of catalysts 1 and 2 were 2.1 and 1.6 s-1 at 0.27 V and 0.24 V over potential, respectively, which is very significant in WOR.

Electrocatalytic Water Oxidation by Mononuclear Copper Complexes of Bis-amide Ligands with N4 Donor: Experimental and Theoretical Investigation

The present work describes electrocatalytic water oxidation of three monomeric copper complexes [CuII(L1)] (1), [CuII(L2)(H2O)] (2), and [CuII(L3)] (3) with bis-amide tetradentate ligands: L1 = N,N'-(1,2-phenylene)dipicolinamide, L2 = N,N'-(4,5-dimethyl-1,2-phenylene)bis(pyrazine-2-carboxamide), L3 = N,N'-(1,2-phenylene)bis(pyrazine-2-carboxamide), for the production of molecular oxygen by the oxidation of water at pH 13.0. Ligands and all complexes have been synthesized and characterized by single crystal XRD, analytical, and spectroscopic techniques. X-ray crystallographic data show that the ligand coordinates to copper in a dianionic fashion through deprotonation of two -NH protons. Cyclic voltammetry study shows a reversible copper-centered redox couple with one ligand-based oxidation event. The electrocatalytic water oxidation occurs at an onset potential of 1.16 (overpotential, η ≈ 697 mV), 1.2 (η ≈ 737 mV), and 1.23 V (η ≈ 767 mV) for 1, 2, and 3 respectively. A systematic variation of the ligand scaffold has been found to display a profound effect on the rate of electrocatalytic oxygen evolution. The results of the theoretical (density functional theory) studies show the stepwise ligand-centered oxidation process and the formation of the O-O bond during water oxidation passes through the water nucleophilic attack for all the copper complexes. At pH = 13, the turnover frequencies have been experimentally obtained as 88, 1462, and 10 s-1 (peak current measurements) for complexes 1, 2, and 3, respectively. Production of oxygen gas during controlled potential electrolysis was detected by gas chromatography.

C-H Bond Activation by an Antimony(V) Oxo Intermediate Accessed through Electrochemical Oxidation of Antimony(III) Tetrakis(thiocyano)corrole

A new class of antimony(III) corroles has been described. The photophysical properties of these newly synthesized tetrakis(thiocyano)corrolatoantimony(III) derivatives having four SCN groups on the bipyrrole unit of corrole are drastically altered compared to their β-unsubstituted corrolatoantimony(III) analogues. The UV-vis and emission spectra of tetrakis(thiocyano)corrolatoantimony(III) derivatives are significantly red-shifted (roughly 30-40 nm) in comparison with their β-unsubstituted corrolatoantimony(III) derivatives. The Q bands are significantly strengthened. The intensity of the most prominent Q band is roughly 70% that of the Soret band and absorbs strongly at the far-red region, i.e., at 700-720 nm. These molecules emit light in the near-infrared region (700-900 nm). Tetrakis(thiocyano)corrolatoantimony(III) undergoes electrochemical anodic oxidation to form SbV═O species, which facilitates electrocatalytic oxygen evolution reaction (OER) and the activation of benzylic C-H to produce benzoic acid selectively. Under optimized conditions, SbIII-corrole@NF (NF = nickel foam) required an overpotential of 380 mV to reach a 50 mA cm-2 current density, comparable with those of other transition-metal-based complexes. On the other hand, replacing the anodic OER with benzyl alcohol oxidation lowered the required potential by 150 mV (at 300 mA cm-2) to improve the energy efficiency of the electrochemical process.

Coordination Tuning of Metal Porphyrins for Improved Oxygen Evolution Reaction

The nucleophilic attack of water or hydroxide on metal-oxo units forms an O-O bond in the oxygen evolution reaction (OER). Coordination tuning to improve this attack is intriguing but has been rarely realized. We herein report on improved OER catalysis by metal porphyrin 1-M (M=Co, Fe) with a coordinatively unsaturated metal ion. We designed and synthesized 1-M by sterically blocking one porphyrin side with a tethered tetraazacyclododecane unit. With this protection, the metal-oxo species generated in OER can maintain an unoccupied trans axial site. Importantly, 1-M displays a higher OER activity in alkaline solutions than analogues lacking such an axial protection by decreasing up to 150-mV overpotential to achieve 10 mA/cm2 current density. Theoretical studies suggest that with an unoccupied trans axial site, the metal-oxo unit becomes more positively charged and thus is more favoured for the hydroxide nucleophilic attack as compared to metal-oxo units bearing trans axial ligands.

Bimetallic Molecular Catalyst Design for Carbon Dioxide Reduction

The core challenge in developing cost-efficient catalysts for carbon dioxide (CO2 ) conversion mainly lies in controlling its complex reaction pathways. One such strategy exploits bimetallic cooperativity, which relies on the synergistic interaction between two metal centers to activate and convert the CO2 substrate. While this approach has seen an important trend in heterogeneous catalysis as a handle to control stabilities of surface intermediates, it has not often been utilized in molecular and heterogenized molecular catalytic systems. In this review, we gather general principles on how natural CO2 activating enzymes take advantage of bimetallic strategy and how phosphines, cyclams, polypyridyls, porphyrins, and cryptates-based homo- and hetero-bimetallic molecular catalysts can help understand the synergistic effect of two metal centers.

Distinct chemical factors in hydrolytic reactions catalyzed by metalloenzymes and metal complexes

The selective hydrolysis of the extremely stable phosphoester, peptide and ester bonds of molecules by bio-inspired metal-based catalysts (metallohydrolases) is required in a wide range of biological, biotechnological and industrial applications. Despite the impressive advances made in the field, the ultimate goal of designing efficient enzyme mimics for these reactions is still elusive. Its realization will require a deeper understanding of the diverse chemical factors that influence the activities of both natural and synthetic catalysts. They include catalyst-substrate complexation, non-covalent interactions and the electronic nature of the metal ion, ligand environment and nucleophile. Based on our computational studies, their roles are discussed for several mono- and binuclear metallohydrolases and their synthetic analogues. Hydrolysis by natural metallohydrolases is found to be promoted by a ligand environment with low basicity, a metal bound water and a heterobinuclear metal center (in binuclear enzymes). Additionally, peptide and phosphoester hydrolysis is dominated by two competing effects, i.e. nucleophilicity and Lewis acid activation, respectively. In synthetic analogues, hydrolysis is facilitated by the inclusion of a second metal center, hydrophobic effects, a biological metal (Zn, Cu and Co) and a terminal hydroxyl nucleophile. Due to the absence of the protein environment, hydrolysis by these small molecules is exclusively influenced by nucleophile activation. The results gleaned from these studies will enhance the understanding of fundamental principles of multiple hydrolytic reactions. They will also advance the development of computational methods as a predictive tool to design more efficient catalysts for hydrolysis, Diels-Alder reaction, Michael addition, epoxide opening and aldol condensation.

Oxido-Molybdenum(V) Corroles as Robust Catalysts for Oxidative Bromination and Selective Epoxidation Reactions in Aqueous Media under Mild Conditions

Two new meso-substituted oxido-molybdenum corroles were synthesized and characterized by various spectroscopic techniques. In the thermogram, MoO[TTC] (1) exhibited excellent thermal stability up to 491 °C while MoO[TNPC] (2) exhibited good stability up to 318 °C. The oxidation states of the molybdenum(V) were verified by electron paramagnetic resonance (EPR) spectroscopy and exhibited an axial compression with d_xy¹ configuration. Oxido-molybdenum(V) complexes were utilized for the selective epoxidation of various olefins with high TOF values (2066-3287 h^-1) in good yields in a CH₃CN/H₂O (3:2, v/v) mixture in the presence of hydrogen peroxide as a green oxidant and NaHCO₃ as a promoter. The oxidative bromination catalytic activity of oxido-molybdenum(V) complexes in an aqueous medium has been reported for the first time. Surprisingly, MoO[TNPC] (2) biomimics of the vanadium bromoperoxidase (VBPO) enzyme activity exhibited remarkably high TOF values (36 988-61 646 h^-1) for the selective oxidative bromination of p-cresol and other phenol derivatives. Catalyst MoO[TNPC] (2) exhibited higher TOF values and better catalytic activity than catalyst MoO[TTC] (1) due to the presence of electron-withdrawing nitro groups evident from cyclic voltammetric studies.

Safety assessment of new nanodiamonds@corrole hybrids addressed by the response of RAW-264.7 macrophages

Safety assessment of carbon nanomaterials is of paramount importance since they are on the frontline for applications in sensing, bioimaging and drug delivery. The biocompatibility and safety of functionalized nanodiamonds (NDs) are here addressed through the study of the pro-inflammatory response of RAW-264.7 macrophages exposed to new nanodiamonds@corrole hybrids. The corrole unit selected is as a prototype for a hydrophobic organic molecule that can function as a NIR fluorophore reporter, an optical sensor, a photodynamic therapy agent or a photocatalyst. The new functional nanohybrids containing detonated nanodiamonds (NDs) were obtained through esterification using carboxylated NDs and glycol corroles. The success of the covalent functionalization via carbodiimide activation was confirmed through X-ray photoelectron spectroscopy (XPS), Raman and Fourier transform infrared (FTIR) spectroscopy. The UV-vis absorption and emission spectra of the hybrids are additive with respect to the corrole features. The cellular uptake, localization, cell viability and effects on immune cell activation of the new hybrids and of the precursors were carefully investigated using RAW-264.7 macrophages. Overall results showed that the ND@corrole hybrids had no pro-inflammatory effects on the RAW-264.7 macrophage cell line, making them an ideal candidate for a wide range of biomedical applications.

Characterization of Reaction Intermediates Involved in the Water Oxidation Reaction of a Molecular Cobalt Complex

Molecular cobalt(III) complexes of bis-amidate-bis-alkoxide ligands, (Me₄N)[Co^III(L₁)] (1) and (Me₄N)[Co^III(L₂)] (2), are synthesized and assessed through a range of characterization techniques. Electrocatalytic water oxidation activity of the Co complexes in a 0.1 M phosphate buffer solution revealed a ligand-centered 2e^-/1H⁺ transfer event at 0.99 V followed by catalytic water oxidation (WO) at an onset overpotential of 450 mV. By contrast, 2 reveals a ligand-based oxidation event at 0.9 V and a WO onset overpotential of 430 mV. Constant potential electrolysis study and rinse test experiments confirm the homogeneous nature of the Co complexes during WO. The mechanistic investigation further shows a pH-dependent change in the reaction pathway. On the one hand, below pH 7.5, two consecutive ligand-based oxidation events result in the formation of a Co^III(L^2-)(OH) species, which, followed by a proton-coupled electron transfer reaction, generates a Co^IV(L^2-)(O) species that undergoes water nucleophilic attack to form the O-O bond. On the other hand, at higher pH, two ligand-based oxidation processes merge together and result in the formation of a Co^III(L^2-)(OH) complex, which reacts with OH^- to yield the O-O bond. The ligand-coordinated reaction intermediates involved in the WO reaction are thoroughly studied through an array of spectroscopic techniques, including UV-vis absorption spectroscopy, electron paramagnetic resonance, and X-ray absorption spectroscopy. A mononuclear Co^III(OH) complex supported by the one-electron oxidized ligand, [Co^III(L^3-)(OH)]^-, a formal Co^IV(OH) complex, has been characterized, and the compound was shown to participate in the hydroxide rebound reaction, which is a functional mimic of Compound II of Cytochrome P450.

Reaction of Corroles with Sarcosine and Paraformaldehyde: A New Facet of Corrole Chemistry

Details on the unexpected formation of two new (dimethylamino)methyl corrole isomers from the reaction of 5,10,15-tris(pentafluorophenyl)corrolatogallium(III) with sarcosine and paraformaldehyde are presented. Semi-empirical calculations on possible mechanism pathways seem to indicate that the new compounds are probably formed through a Mannich-type reaction. The extension of the protocol to the free-base 5,10,15-tris(pentafluorophenyl)corrole afforded an unexpected new seven-membered ring corrole derivative, confirming the peculiar behavior of corroles towards known reactions when compared to the well-behaved porphyrin counterparts.

Dimerization of [FeIII(bpy)3]3+ in Aqueous Solutions: Elucidating a Mechanism Based on Historical Proposals, Electrochemical Data, and Computational Free Energy Analysis

Iron(II) tris-bipyridine, [Fe^II(bpy)₃]²⁺, is a historically significant organometallic coordination complex with attractive redox and photophysical properties. With respect to energy storage, it is a low-cost, high-redox potential complex and thus attractive for use as a catholyte in aqueous redox flow batteries. Despite these favorable characteristics, its oxidized Fe(III) form undergoes dimerization to form μ-O-[Fe^III(bpy)₂(H₂O)]₂⁴⁺, leading to a dramatic ∼0.7 V decrease during battery discharge. To date, the energetics and complete mechanism of this slow, sequential electrochemical-chemical (EC) process, which includes electron transfer, nucleophilic attack, ligand cleavage, μ-oxo bond formation, and spin state transition, have not been elucidated. Using cyclic voltammetry, redox flow battery data, and density functional theory calculations guided by previously proposed mechanisms, we modeled more than 100 complexes and performed more than 50 geometry scans to resolve the key steps dictating these complex chemical processes. Quantitative free energy surfaces are developed to model the mechanism of dimerization accounting for the spins and identities of any possible Fe(II), Fe(III), or Fe(IV) intermediates. Electrochemical reduction of the dimer regenerates [Fe^II(bpy)₃]²⁺ in an overall reversible process. Computational electrochemistry interrogates the influence of spin state, coordination environment, and molecular conformation at the electrode-electrolyte interface through a proposed stepwise dimer reduction process. Experimentally, we show that the considerable overpotential associated with this event can be catalytically mitigated with disparate materials, including platinum, copper hexacyanoferrate, and activated carbon. The findings are of fundamental and applied significance and could elevate [Fe^II(bpy)₃]²⁺ and its derivatives to play a vital role in the burgeoning renewable energy economy.

Metal-Corrole-Based Porous Organic Polymers for Electrocatalytic Oxygen Reduction and Evolution Reactions

Integrating molecular catalysts into designed frameworks often enables improved catalysis. Compared with porphyrin-based frameworks, metal-corrole-based frameworks have been rarely developed, although monomeric metal corroles are usually more efficient than porphyrin counterparts for the electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). We herein report on metal-corrole-based porous organic polymers (POPs) as ORR and OER electrocatalysts. M-POPs (M=Mn, Fe, Co, Cu) were synthesized by coupling metal 10-phenyl-5,15-(4-iodophenyl)corrole with tetrakis(4-ethynylphenyl)methane. Compared with metal corrole monomers, M-POPs displayed significantly enhanced catalytic activity and stability. Co-POP outperformed other M-POPs by achieving four-electron ORR with a half-wave potential of 0.87 V vs. RHE and reaching 10 mA cm^-2 OER current density at 340 mV overpotential. This work is unparalleled to develop and explore metal-corrole-based POPs as electrocatalysts.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Metal Complexes of Singly, Doubly and Triply Linked Porphyrins and Corroles: An Insight into the Physicochemical Properties

Metal complexes of multi‐porphyrins and multi‐corroles are unique systems that display a host of extremely interesting properties. Availability of free meso and β positions allow formation of different types of directly linked bis‐porphyrins giving rise to intriguing optical and electronic properties. While the fields of metalloporphyrin and corroles monomer have seen exponential growth in the last decades, the chemistry of metal complexes of bis‐porphyrins and bis‐corroles remain rather underexplored. Therefore, the impact of covalent linkages on the optical, electronic, (spectro)electrochemical, magnetic and electrocatalytic activities of metal complexes of bis‐porphyrins and ‐corroles has been summarized in this review article. This article shows that despite the (still) somewhat difficult synthetic access to these molecules, their extremely exciting properties do make a strong case for pursuing research on these classes of compounds.

Strategies for Electrochemically Sustainable H2 Production in Acid

Acidified water electrolysis with fast kinetics is widely regarded as a promising option for producing H₂ . The main challenge of this technique is the difficulty in realizing sustainable H₂ production (SHP) because of the poor stability of most electrode catalysts, especially on the anode side, under strongly acidic and highly polarized electrochemical environments, which leads to surface corrosion and performance degradation. Research efforts focused on tuning the atomic/nano structures of catalysts have been made to address this stability issue, with only limited effectiveness because of inevitable catalyst degradation. A systems approach considering reaction types and system configurations/operations may provide innovative viewpoints and strategies for SHP, although these aspects have been overlooked thus far. This review provides an overview of acidified water electrolysis for systematic investigations of these aspects to achieve SHP. First, the fundamental principles of SHP are discussed. Then, recent advances on design of stable electrode materials are examined, and several new strategies for SHP are proposed, including fabrication of symmetrical heterogeneous electrolysis system and fluid homogeneous electrolysis system, as well as decoupling/hybrid-governed sustainability. Finally, remaining challenges and corresponding opportunities are outlined to stimulate endeavors toward the development of advanced acidified water electrolysis techniques for SHP.

Electrocatalytic Water Oxidation Activity of Molecular Copper Complexes: Effect of Redox-Active Ligands

Two molecular copper(II) complexes, (NMe₄)₂[Cu^II(L₁)] (1) and (NMe₄)₂[Cu^II(L₂)] (2), ligated by a N₂O₂ donor set of ligands [L₁ = N,N'-(1,2-phenylene)bis(2-hydroxy-2-methylpropanamide), and L₂ = N,N'-(4,5-dimethyl-1,2-phenylene)bis(2-hydroxy-2-methylpropanamide)] have been synthesized and thoroughly characterized. An electrochemical study of 1 in a carbonate buffer at pH 9.2 revealed a reversible copper-centered redox couple at 0.51 V, followed by two ligand-based oxidation events at 1.02 and 1.25 V, and catalytic water oxidation at an onset potential of 1.28 V (overpotential of 580 mV). The electron-rich nature of the ligand likely supports access to high-valent copper species on the CV time scale. The results of the theoretical electronic structure investigation were quite consistent with the observed stepwise ligand-centered oxidation process. A constant potential electrolysis experiment with 1 reveals a catalytic current density of >2.4 mA cm^-2 for 3 h. A one-electron-oxidized species of 1, (NMe₄)[Cu^III(L₁)] (3), was isolated and characterized. Complex 2, on the contrary, revealed copper and ligand oxidation peaks at 0.505, 0.90, and 1.06 V, followed by an onset water oxidation (WO) at 1.26 V (overpotential of 560 mV). The findings show that the ligand-based oxidation reactions strongly depend upon the ligand's electronic substitution; however, such effects on the copper-centered redox couple and catalytic WO are minimal. The energetically favorable mechanism has been established through the theoretical calculation of stepwise reaction energies, which nicely explains the experimentally observed electron transfer events. Furthermore, as revealed by the theoretical calculations, the O-O bond formation process occurs through a water nucleophilic attack mechanism with an easily accessible reaction barrier. This study demonstrates the importance of redox-active ligands in the development of molecular late-transition-metal electrocatalysts for WO reactions.

Corroles at work: a small macrocycle for great applications

Corrole chemistry has witnessed an impressive boost in studies in the last 20 years, thanks to the possibility of preparing corrole derivatives by simple synthetic procedures. The investigation of a large number of corroles has highlighted some peculiar characteristics of these macrocycles, having features different from those of the parent porphyrins. With this progress in the elucidation of corrole properties, attention has been focused on the potential for the exploitation of corrole derivatives in different important application fields. In some areas, the potential of corroles has been studied in certain detail, for example, the use of corrole metal complexes as electrocatalysts for energy conversion. In some other areas, the field is still in its infancy, such as in the exploitation of corroles in solar cells. Herein, we report an overview of the different applications of corroles, focusing on the studies reported in the last five years.

A mono-oxo-bridged binuclear iron(iii) complex with a Fe–O–Fe angle of 180.0° and its catalytic activity for hydrogen evolution

There are potential applications for binuclear oxo-bridged iron complexes in biological processes, catalysts, and magnetic materials, and the design of new bridged-iron complexes is important.

Boosting Electrocatalyzed Hydrogen Evolutions with Electropolymerized Thiophene Substituted CoIIICorroles

Herein, a A3 type and a A2B type meso-thiophene-substituted CoIIIcorroles are prepared and the electronic structures are investigated. Interestingly, these two CoIIIcorroles are facilely polymerized under electrochemical conditions, and are...

Understanding the factors governing the water oxidation reaction pathway of mononuclear and binuclear cobalt phthalocyanine catalysts

The rational design of efficient catalysts for electrochemical water oxidation highly depends on the understanding of reaction pathways, which still remains a challenge. Herein, mononuclear and binuclear cobalt phthalocyanine (mono-CoPc and bi-CoPc) with a well-defined molecular structure are selected as model electrocatalysts to study the water oxidation mechanism. We found that bi-CoPc on a carbon support (bi-CoPc/carbon) shows an overpotential of 357 mV at 10 mA cm⁻², much lower than that of mono-CoPc/carbon (>450 mV). Kinetic analysis reveals that the rate-determining step (RDS) of the oxygen evolution reaction (OER) over both electrocatalysts is a nucleophilic attack process involving a hydroxy anion (OH⁻). However, the substrate nucleophilically attacked by OH⁻ for bi-CoPc is the phthalocyanine cation-radical species (Co^II–Pc–Pc˙⁺–Co^II–OH) that is formed from the oxidation of the phthalocyanine ring, while cobalt oxidized species (Pc–Co^III–OH) is involved in mono-CoPc as evidenced by the operando UV-vis spectroelectrochemistry technique. DFT calculations show that the reaction barrier for the nucleophilic attack of OH⁻ on Co^II–Pc–Pc˙⁺–Co^II–OH is 1.67 eV, lower than that of mono-CoPc with Pc–Co^III–OH nucleophilically attacked by OH⁻ (1.78 eV). The good agreement between the experimental and theoretical results suggests that bi-CoPc can effectively stabilize the accumulated oxidative charges in the phthalocyanine ring, and is thus bestowed with a higher OER performance.

bi-CoPc can stabilize accumulated oxidative charges in phthalocyanine ring, which leads to the OER proceeding through a nucleophilic attack of OH^- on the phthalocyanine cation-radical species that is formed from the oxidation of phthalocyanine ring.

Electrocatalytic Hydrogen Production by CN‑ substituted Cobalt Triaryl Corroles

Four cobalt corrole complexes bearing 0–3 cyano groups on the para-position of the three meso-phenyl rings of the macrocycle were synthesized, characterized and applied for electrocatalytic H2 production under both...

Iron-N-Heterocyclic Carbene Complexes as Efficient Electrocatalysts for Water Oxidation in Acidic Conditions

The development of stable, earth-abundant, and high-activity molecular water oxidation catalysts in acidic and neutral conditions remains a great challenge. Here, the use of N-heterocyclic carbene (NHC)-based iron(III) complex 1...

Efficient Electrochemical Water Oxidation Mediated by Pyridylpyrrole-Carboxylate Ruthenium Complexes

Spurred by the rapid growth of Ru-based complexes as molecular water oxidation catalysts (WOCs), we propose novel ruthenium(II) complexes bearing pyridylpyrrole-carboxylate (H₂ppc) ligands as members of the WOC family. The structure of these complexes has 4-picoline (pic)/dimethyl sulfoxide (DMSO) in [Ru(ppc)(pic)₂(dmso)] and pic/pic in [Ru(ppc)(pic)₃] as axial ligands. Another ppc^2- ligand and one pic ligand are located at the equatorial positions. [Ru(ppc)(pic)₂(dmso)] behaves as a WOC as determined by electrochemical measurement and has an ultrahigh electrocatalytic current density of 8.17 mA cm^-2 at 1.55 V (vs NHE) with a low onset potential of 0.352 V (vs NHE), a turnover number of 241, a turnover frequency of 203.39 s^-1, and k_cat of 16.34 s^-1 under neutral conditions. The H₂O/pic exchange of the complexes accompanied by oxidation of a ruthenium center is the initial step in the catalytic cycle. The cyclic voltametric measurements of [Ru(ppc)(pic)₂(dmso)] at various scan rates, Pourbaix diagrams (plots of E vs pH), and kinetic studies suggested a water nucleophilic attack mechanism. HPO₄^2- in a phosphate buffer solution is invoked in water oxidation as the proton acceptor.

Identifying Intermediates in Electrocatalytic Water Oxidation with a Manganese Corrole Complex

Water nucleophilic attack (WNA) on high-valent terminal Mn-oxo species is proposed for O-O bond formation in natural and artificial water oxidation. Herein, we report an electrocatalytic water oxidation reaction with Mn^III tris(pentafluorophenyl)corrole (1) in propylene carbonate (PC). O₂ was generated at the Mn^V/IV potential with hydroxide, but a more anodic potential was required to evolve O₂ with only water. With a synthetic Mn^V(O) complex of 1, a second-order rate constant, k₂(OH^-), of 7.4 × 10³ M^-1 s^-1 was determined in the reaction of the Mn^V(O) complex of 1 with hydroxide, whereas its reaction with water occurred much more slowly with a k₂(H₂O) value of 4.4 × 10^-3 M^-1 s^-1. This large reactivity difference of Mn^V(O) with hydroxide and water is consistent with different electrocatalytic behaviors of 1 with these two substrates. Significantly, during the electrolysis of 1 with water, a Mn^IV-peroxo species was identified with various spectroscopic methods, including UV-vis, electron paramagnetic resonance, and infrared spectroscopy. Isotope-labeling experiments confirmed that both O atoms of this peroxo species are derived from water, suggesting the involvement of the WNA mechanism in water oxidation by a Mn complex. Density functional theory calculations suggested that the nucleophilic attack of hydroxide on Mn^V(O) and also WNA to 1e^--oxidized Mn^V(O) are feasibly involved in the catalytic cycles but that direct WNA to Mn^V(O) is not likely to be the main O-O bond formation pathway in the electrocatalytic water oxidation by 1.

Minding our P-block and Q-bands: paving inroads into main group corrole research to help instil broader potential

Main group chemistry is often considered less "dynamic" than transition metal (TM) chemistry because of predictable VSEPR-based central atom geometries, relatively slower redox switching and lack of electronic d-d transitions. However, we delineate what has been made possible with main group chemistry to give it its proper due and up-to-date treatment. The huge untapped potential regarding photophysical properties and functioning hereby spurred us to review a range of corrole reports addressing primarily photophysical trends, synthetic aspects, and important guidelines regarding substitution and inorganic principles. We also look at Ag and Au systems and also consider substitutions such as CF3, halogens, additives and also counterions. Throughout, as well as at the end of this review, we suggest various future directions; further future industrial catalytic and health science research is encouraged.

β-Disubstituted silver(III) corroles: Facile synthesis, photophysical and electrochemical redox properties

Facile synthesis of 3,17-disubstituted Ag(III) tritolylcorroles (2-5), R2[TTC]Ag where R = methyl (2), phenyl (3), methyl acrylate (MA) (4) and phenylethynyl (PE) (5) using Pd-catalyzed reactions in good to excellent yields are reported. All synthesized corroles were characterized by various spectroscopic techniques and mass spectrometry. MA2[TTC]Ag (4) and PE2[TTC]Ag (5) exhibited highly red-shifted electronic spectral bands with considerable broadening due to extended [Formula: see text]-conjugation and electron withdrawing effect of [Formula: see text]-substituents. Geometry optimization of these corroles was performed using density functional theory (DFT). Among all, MA2[TTC]Ag (4) exhibited very high dipole moment (10.31 D) which could be the potential candidate for nonlinear optical (NLO) applications. The redox tunability was achieved by substituting electron donating and withdrawing substituents at the [Formula: see text]-positions. Particularly, corroles 4 and 5 exhibited lower HOMO–LUMO gap due to extended [Formula: see text]-conjugation and electron withdrawing [Formula: see text]-substituents.

Unveiling the High Catalytic Activity of a Dinuclear Iron Complex for the Oxygen Evolution Reaction

The dinuclear iron complex [(H₂O)-Fe^III-(ppq)-O-(ppq)-Fe^III-Cl]³⁺ (Fe^III(ppq), ppq = 2-(pyrid-2'-yl)-8-(1″,10″-phenanthrolin-2″-yl)-quinoline) demonstrates a catalytic activity about one order of magnitude higher than the mononuclear iron complex [Cl-Fe^III(dpa)-Cl]⁺ (Fe^III(dpa), dpa = N,N-di(1,10-phenanthrolin-2-yl)-N-isopentylamine) for the oxygen evolution reaction (OER). However, the mechanism behind such an unusually high activity has remained largely unclear. To solve this puzzle, a decomposition-and-reaction mechanism is proposed for the OER with the dinuclear Fe^III(ppq) complex as the initial state of the catalytic agent. In this mechanism, the high-valent dinuclear iron complex first dissociates into two mononuclear moieties, and the oxidized mononuclear iron complexes directly catalyze the formation of an O-O bond through a nitrate attack pathway with nitrate functioning as a cocatalyst. Density functional theory calculations reveal that it is the electron-deficient microenvironment around the iron center that gives rise to the remarkable catalytic activity observed experimentally. Therefore, the outstanding performance of the Fe^III(ppq) catalyst can be ascribed to the high reactivity of its mononuclear moieties in a high oxidation state, which is concomitant with the structural stability of the low-valent dinuclear complex. The theoretical insights provided by this study could be useful for the optimization and design of novel iron-based water oxidation catalysts.

Chiral Interlocked Corrole Dimers Directly Linked at Inner Carbon Atoms of Confused Pyrrole Rings

A facile synthetic strategy towards conformationally stable chiral chromophores based on dimeric porphyrinoids has been established. A peculiar class of face-to-face intramolecularly interlocked corrole dimers were formed by the oxidative C-C coupling linked at the inner carbon sites upon simple treatment of copper(II) ions. Their intrinsic electronic structures were modulated by the peripheral corrole ring annulations, which lead to distinct optical properties and redox profiles. The stereogenic carbon centers implemented in the confused corrole skeleton provided a rationale for designing novel chiral materials.

Cobalt Corroles as Electrocatalysts for Water Oxidation: Strong Effect of Substituents on Catalytic Activity

Two Co(III) complexes (1Py₂ and 2Py₂) of new corrole ligands H₃L1 (5,15-bis(p-methylcarboxyphenyl)-10-(o-methylcarboxyphenyl)corrole) and H₃L2 (5,15-bis(p-nitrophenyl)-10-(o-methylcarboxyphenyl)corrole) with two apical pyridine ligands have been synthesized and thoroughly characterized by cyclic voltammetry, UV-vis-NIR, and EPR spectroscopy, spectroelectrochemistry, single-crystal X-ray diffraction studies, and DFT methods. Complexes 1Py₂ and 2Py₂ possess much lower oxidation potentials than cobalt(III)-tris-pentafluorophenylcorrole (Co(tpfc)) and similar corroles containing pentafluorophenyl (C₆F₅) substituents, thus allowing access to high oxidation states of the former metallocorroles using mild chemical oxidants. The spectroscopic (UV-vis-NIR and EPR) and electronic properties of several oxidation states of these complexes have been determined by a combination of the mentioned methods. Complexes 1Py₂ and 2Py₂ undergo three oxidations within 1.3 V vs FcH⁺/FcH in MeCN, and we show that both complexes catalyze water oxidation in an MeCN/H₂O mixture upon the third oxidation, with k_obs (TOF) values of 1.86 s^-1 at 1.29 V (1Py₂) and 1.67 s^-1 at 1.37 V (2Py₂). These values are five times higher than previously reported TOF values for C₆F₅-substituted cobalt(III) corroles, a finding we ascribe to the additional charge in the corrole macrocycle due to the increased oxidation state. This work opens up new possibilities in the study of metallocorrole water oxidation catalysts, particularly by allowing spectroscopic probing of high-oxidation states and showing strong substituent-effects on catalytic activity of the corrole complexes.

An Iron(III) Complex with Pincer Ligand—Catalytic Water Oxidation through Controllable Ligand Exchange

Pincer ligands occupy three coplanar sites at metal centers and often support both stability and reactivity. The five-coordinate [FeIIICl2(tia-BAI)] complex (tia-BAI− = 1,3-bis(2’-thiazolylimino)isoindolinate(−)) was considered as a potential pre-catalyst for water oxidation providing the active form via the exchange of chloride ligands to water molecules. The tia-BAI− pincer ligand renders water-insolubility to the Fe–(tia-BAI) assembly, but it tolerates the presence of water in acetone and produces electrocatalytic current in cyclic voltammetry associated with molecular water oxidation catalysis. Upon addition of water to [FeIIICl2(tia-BAI)] in acetone the changes in the Fe3+/2+ redox transition and the UV-visible spectra could be associated with solvent-dependent equilibria between the aqua and chloride complex forms. Immobilization of the complex from methanol on indium-tin-oxide (ITO) electrode by means of drop-casting resulted in water oxidation catalysis in borate buffer. The O2 detected by gas chromatography upon electrolysis at pH 8.3 indicates >80% Faraday efficiency by a TON > 193. The investigation of the complex/ITO assembly by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) before and after electrolysis, and re-dissolution tests suggest that an immobilized molecular catalyst is responsible for catalysis and de-activation occurs by depletion of the metal.