Hydrazine-Hydrazide-Linked Covalent Organic Frameworks for Water Harvesting

Effective extraction and detection of aflatoxins in cereals using nitrogen-rich benzodiimidazole linkage magnetic covalent organic framework based solid phase extraction and HPLC-MS/MS analysis

Cereals are frequently contaminated by aflatoxins (AFs). The objective of this study was to develop an efficient extraction materials for rapidly extracting and detecting AFs. A novel amino-functionalized benzodiimidazole linkage magnetic covalent organic framework (Fe3O4@BB-COF) was simply fabricated by one-step cyclization and aromatization. The Fe3O4@BB-COF, having multiple N-containing active sites, exhibited excellent extraction capability towards AFs due to synergistic interactions, including the π-π interactions, hydrogen bonding interactions, polar interactions, electrostatic interactions and Lewis acid-base interactions. The Fe3O4@BB-COF based MSPE method for detecting aflatoxins has advantages of simple operation, short extraction time (6 min), and low material consumption (2 mg). This method exhibited satisfactory linearity (0.05-20 μg/kg), and sensitivity (0.01-0.45 μg/L for the detection limits) and accuracy (76.8-97.1 % for recovery) and was successfully applied for extracting and detecting AFs in cereals.

Triphenylamine-Based Covalent Organic Framework Films for Dopamine-Responsive Electrofluorochromism

Covalent organic framework (COF) film with electrofluorochromic (EFC) and electrochromic (EC) properties has been synthesized by using triphenylamine-based monomers. The film exhibited a high maximum fluorescence contrast of 151 when subjected to a drive voltage of 0.75 V vs the Ag/AgCl electrode, causing the fluorescence to be quenched, which resulted in the EFC process's "fluorescence off" state. The switching times for the fluorescence on and off states were 0.51 and 7.79 s, respectively. Over the same voltage range, the COF film also displayed EC properties, achieving a contrast of 50.23% and a coloration efficiency of 297.4 cm2 C-1 at 532 nm, with switching times of 18.6 s for coloration and 0.7 s for bleaching. Notably, the quenched fluorescence of the COF film could be restored by adding dopamine as a reductant. This phenomenon enabled the implementation of a NAND logic gate using the applied potential as a physical input and dopamine addition as a chemical input. This study demonstrates the successful development of COF films with bifunctional EFC and EC properties, showcasing their potential for use in constructing advanced optoelectronic devices.

Pyridazine-Promoted Construction of Vinylene-Linked Covalent Organic Frameworks with Exceptional Capability of Stepwise Water Harvesting

In this study, we successfully developed two novel vinylene-linked covalent organic frameworks (COFs) using 2-connected 3,6-dimethylpyridazine through Knoevenagel condensation. These COFs featured finely tailored micro-/nano-scale pore sizes, high surface areas and stable non-polar vinylene linkages. Finely resolved powder X-ray diffraction patterns demonstrated highly crystalline structures with a hexagonal lattice in the AA layer stacking. The resulting one-dimensional channels possess strong hydrogen-bond accepting sites arising from the decorated cis-azo/azine units with two pairs of fully exposed lone pair electrons, endowing the as-prepared COFs with exceptional water absorption properties. The g-DZPH-COF exhibited successive steep water uptake steps starting from low relative pressures (P/PSTA=0.1), with the remarkable water uptake capacity of 0.26 g/g at P/PSTA=0.2 (25 °C), which is the optimal value recorded among the reported COFs. Dynamic vapour sorption measurements revealed the fast kinetics of these COFs, even in the cluster formation process. Water uptake and release cycling tests demonstrated their outstanding hydrolytic stability, durability, and adsorption-desorption retention ability.

Chemistries and materials for atmospheric water harvesting

Atmospheric water harvesting (AWH) is recognized as a crucial strategy to address the global challenge of water scarcity by tapping into the vast reserves of atmospheric moisture for potable water supply. Within this domain, sorbents lie in the core of AWH technologies as they possess broad adaptability across a wide spectrum of humidity levels, underpinned by the cyclic sorption and desorption processes of sorbents, necessitating a multi-scale viewpoint regarding the rational material and chemical selection and design. This Invited Review delves into the essential sorption mechanisms observed across various classes of sorbent systems, emphasizing the water-sorbent interactions and the progression of water networks. A special focus is placed on the insights derived from isotherm profiles, which elucidate sorbent structures and sorption dynamics. From these foundational principles, we derive material and chemical design guidelines and identify key tuning factors from a structural-functional perspective across multiple material systems, addressing their fundamental chemistries and unique attributes. The review further navigates through system-level design considerations to optimize water production efficiency. This review aims to equip researchers in the field of AWH with a thorough understanding of the water-sorbent interactions, material design principles, and system-level considerations essential for advancing this technology.

Covalent Organic Frameworks for Water Harvesting from Air

Despite approximately 70 % of the earth being covered by water, water shortage has emerged as an urgent social challenge. Sorbent-based atmospheric water harvesting stands out as a potent approach to alleviate the situation, particularly in arid regions. This method requires adsorbents with ample working capacity, rapid kinetics, low energy costs, and long-term stability under operating conditions. Covalent organic frameworks (COFs) are a novel class of crystalline porous materials and offer distinct advantages due to their high specific surface area, structural diversity, and robustness. These properties enable the rational design and customization of their water-harvesting capabilities. Herein, the basic concepts about the water sorption process within COFs, including the parameters that qualitatively or quantitatively describe their water isotherms and the mechanism are summarized. Then, the recent methods used to prepare COFs-based water harvesters are reviewed, emphasizing the structural diversity of COFs and presenting the common empirical understandings of these endeavors. Finally, challenges and research concepts are proposed to help develop next-generation COFs-based water harvesters.

Ionic Covalent Organic Frameworks in Adsorption and Catalysis

The ion extraction and electro/photo catalysis are promising methods to address environmental and energy issues. Covalent organic frameworks (COFs) are a class of promising template to construct absorbents and catalysts because of their stable frameworks, high surface areas, controllable pore environments, and well-defined catalytic sites. Among them, ionic COFs as unique class of crystalline porous materials, with charges in the frameworks or along the pore walls, have shown different properties and resulting performance in these applications with those from charge-neutral COFs. In this review, current research progress based on the ionic COFs for ion extraction and energy conversion, including cationic/anionic materials and electro/photo catalysis is reviewed in terms of the synthesis strategy, modification methods, mechanisms of adsorption and catalysis, as well as applications. Finally, we demonstrated the current challenges and future development of ionic COFs in design strategies and applications.

A Sulfonated Covalent Organic Framework for Atmospheric Water Harvesting

We report a sulfonated covalent organic framework (COF) capable of atmospheric water harvesting in arid conditions. The isothermal water uptake profile of the framework was studied, and the network displayed steep water sorption at low relative humidity (RH) in temperatures of up to 45 °C, reaching a water uptake of 0.12 g g-1 at 10 % RH and even 0.08 g g-1 at just 5 % RH, representing some of the most extreme conditions on the planet. We found that the inclusion of sulfonate moieties shifted uptake in the water isotherm profiles to lower RH compared to non-sulfonated equivalents, demonstrating well the benefits of including these hydrophilic sites for water uptake in hot, arid locations. Repeated uptake and desorption cycles were performed on the material without significant detriment to its adsorption performance, demonstrating the potential of the sulfonated COF for real-world implementation.

A Polyzwitterionic@MOF Hydrogel with Exceptionally High Water Vapor Uptake for Efficient Atmospheric Water Harvesting

Atmospheric water harvesting (AWH) is considered a promising strategy for sustainable freshwater production in landlocked and arid regions. Hygroscopic salt-based composite sorbents have attracted widespread attention for their water harvesting performance, but suffer from aggregation and leakage issues due to the salting-out effect. In this study, we synthesized a PML hydrogel composite by incorporating zwitterionic hydrogel (PDMAPS) and MIL-101(Cr) as a host for LiCl. The PML hydrogel was characterized using various techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and thermogravimetric analysis (TGA). The swelling properties and water vapor adsorption-desorption properties of the PML hydrogel were also assessed. The results demonstrate that the MIL-101(Cr) was uniformly embedded into PDMAP hydrogel, and the PML hydrogel exhibits a swelling ratio of 2.29 due to the salting-in behavior. The PML hydrogel exhibited exceptional water vapor sorption capacity of 0.614 g/g at 298 K, RH = 40% and 1.827 g/g at 298 K, RH = 90%. It reached 80% of its saturated adsorption capacity within 117 and 149 min at 298 K, RH = 30% and 90%, respectively. Additionally, the PML hydrogel showed excellent reversibility in terms of water vapor adsorption after ten consecutive cycles of adsorption-desorption. The remarkable adsorption capacity, favorable adsorption-desorption rate, and regeneration stability make the PML hydrogel a potential candidate for AWH. This polymer-MOF synergistic strategy for immobilization of LiCl in this work offers new insights into designing advanced materials for AWH.

Unraveling a Stable 16-Ring Aluminophosphate DNL-11 through Three-Dimensional Electron Diffraction for Atmospheric Water Harvesting

Sorption-based atmospheric water harvesting (AWH) is a promising solution for addressing water scarcity. Developing cost-effective and stable water adsorbents with high water uptake capacity and a low-temperature regeneration requirement is a crucially important procedure. In this Communication, we present a novel and stable aluminophosphate (AlPO) molecular sieve (MS) named DNL-11 with 16-ring channels synthesized by using an affordable and commercialized organic structure directing agent (OSDA), whose crystallographic structure is elucidated by three-dimensional electron diffraction (3D ED). DNL-11 exhibits a significant water uptake capacity (189 mg/g) at a very low vapor pressure (5% relative humidity at 30 °C). In addition, most of the adsorbed water can be effortlessly removed by purging N2 at 25 °C under ambient pressure conditions. This may expand the possibility of AWH under extreme drought conditions.

Hierarchical Engineering of Sorption-Based Atmospheric Water Harvesters

Harvesting water from air in sorption-based devices is a promising solution to decentralized water production, aiming for providing potable water anywhere, anytime. This technology involves a series of coupled processes occurring at distinct length scales, ranging from nanometer to meter and even larger, including water sorption/desorption at the nanoscale, condensation at the mesoscale, device development at the macroscale and water scarcity assessment at the global scale. Comprehensive understanding and bespoke designs at every scale are thus needed to improve the water-harvesting performance. For this purpose, a brief introduction of the global water crisis and its key characteristics is provided to clarify the impact potential and design criteria of water harvesters. Next the latest molecular-level optimizations of sorbents for efficient moisture capture and release are discussed. Then, novel microstructuring of surfaces to enhance dropwise condensation, which is favorable for atmospheric water generation, is shown. After that, system-level optimizations of sorbent-assisted water harvesters to achieve high-yield, energy-efficient, and low-cost water harvesting are highlighted. Finally, future directions toward practical sorption-based atmospheric water harvesting are outlined.

Extreme Water Uptake of Hygroscopic Hydrogels through Maximized Swelling-Induced Salt Loading

Hygroscopic hydrogels are emerging as scalable and low-cost sorbents for atmospheric water harvesting, dehumidification, passive cooling, and thermal energy storage. However, devices using these materials still exhibit insufficient performance, partly due to the limited water vapor uptake of the hydrogels. Here, the swelling dynamics of hydrogels in aqueous lithiumchloride solutions, the implications on hydrogel salt loading, and the resulting vapor uptake of the synthesized hydrogel-salt composites are characterized. By tuning the salt concentration of the swelling solutions and the cross-linking properties of the gels, hygroscopic hydrogels with extremely high salt loadings are synthesized, which enable unprecedented water uptakes of 1.79 and 3.86 gg-1 at relative humidity (RH) of 30% and 70%, respectively. At 30% RH, this exceeds previously reported water uptakes of metal-organic frameworks by over 100% and of hydrogels by 15%, bringing the uptake within 93% of the fundamental limit of hygroscopic salts while avoiding leakage problems common in salt solutions. By modeling the salt-vapor equilibria, the maximum leakage-free RH is elucidated as a function of hydrogel uptake and swelling ratio. These insights guide the design of hydrogels with exceptional hygroscopicity that enable sorption-based devices to tackle water scarcity and the global energy crisis.

Metal-Organic Frameworks for Water Harvesting and Concurrent Carbon Capture: A Review for Hygroscopic Materials

As water scarcity becomes a pending global issue, hygroscopic materials prove a significant solution. Thus, there is a good cause following the structure-performance relationship to review the recent development of hygroscopic materials and provide inspirational insight into creative materials. Herein, traditional hygroscopic materials, crystalline frameworks, polymers, and composite materials are reviewed. The similarity in working conditions of water harvesting and carbon capture makes simultaneously addressing water shortages and reduction of greenhouse effects possible. Concurrent water harvesting and carbon capture is likely to become a future challenge. Therefore, an emphasis is laid on metal-organic frameworks (MOFs) for their excellent performance in water and CO2 adsorption, and representative role of micro- and mesoporous materials. Herein, the water adsorption mechanisms of MOFs are summarized, followed by a review of MOF's water stability, with a highlight on the emerging machine learning (ML) technique to predict MOF water stability and water uptake. Recent advances in the mechanistic elaboration of moisture's effects on CO2 adsorption are reviewed. This review summarizes recent advances in water-harvesting porous materials with special attention on MOFs and expects to direct researchers' attention into the topic of concurrent water harvesting and carbon capture as a future challenge.

Covalent Organic Frameworks: Cutting-Edge Materials for Carbon Dioxide Capture and Water Harvesting from Air

The implacable rise of carbon dioxide (CO2 ) concentration in the atmosphere and acute water stress are one of the central challenges of our time. Present-day chemistry is strongly inclined towards more sustainable solutions. Covalent organic frameworks (COFs), attributable to their structural designability with atomic precision, functionalizable chemical environment and robust extended architectures, have demonstrated promising performances in CO2 trapping and water harvesting from air. In this Review, we discuss the major developments in this field as well as sketch out the opportunities and shortcomings that remain over large-scale COF synthesis, device engineering, and long-term performance in real environments.

Eu3+-Modified Covalent Organic Frameworks for the Detection of a Vinyl Chloride Monomer Exposure Biomarker

The vinyl chloride monomer (VCM), a common raw material in the plastics industry, is one of the environmental pollutants to which humans are mostly exposed. Thiodiglycolic acid (TDGA) in human urine is a specific biomarker of its exposure. TDGA plays an important role in understanding the relationships between exposure to the VCM and the identification of subgroups that are at increased risk for disease diagnosis. Therefore, its detection is of great significance. Here, we designed and established a ratiometric fluorescent sensor for TDGA by using Eu3+ as a bridge connecting the covalent organic framework (COF) and the energy donor molecule 2,6-dipicolinic acid (DPA) and named it DPA/Eu@PY-DHPB-COF-COOH. The sensor not only possesses the advantages of a ratiometric fluorescent sensor that can provide built-in self-calibration to correct a variety of target-independent factors but also presents high selectivity and high sensitivity. Currently, there are only a few reports on the detection of TDGA, and to the extent of our knowledge, this report is the first work on the detection of TDGA based on a COF system; so, it has an important reference value and lays a solid foundation for designing advanced sensors of TDGA.

Chemical Sensors Based on Covalent Organic Frameworks

Covalent organic frameworks (COFs) are a type of crystalline porous polymer composed of light elements through strong covalent bonds. COFs have attracted considerable attention due to their unique designable structures and excellent material properties. Currently, COFs have shown outstanding potential in various fields, including gas storage, pollutant removal, catalysis, adsorption, optoelectronics, and their research in the sensing field is also increasingly flourishing. In this review, we focus on COF-based sensors. Firstly, we elucidate the fundamental principles of COF-based sensors. Then, we present the primary application areas of COF-based sensors and their recent advancements, encompassing gas, ions, organic compounds, and biomolecules sensing. Finally, we discuss the future trends and challenges faced by COF-based sensors, outlining their promising prospects in the field of sensing.

Construction of Multi-Stimuli Responsive Highly Porous Switchable Frameworks by In Situ Solid-State Generation of Spiropyran Switches

Stimuli-responsive molecular systems support within permanently porous materials offer the opportunity to host dynamic functions in multifunctional smart materials. However, the construction of highly porous frameworks featuring external-stimuli responsiveness, for example by light excitation, is still in its infancy. Here a general strategy is presented to construct spiropyran-functionalized highly porous switchable aromatic frameworks by modular and high-precision anchoring of molecular hooks and an innovative in situ solid-state grafting approach. Three spiropyran-grafted frameworks bearing distinct functional groups exhibiting various stimuli-responsiveness are generated by two-step post-solid-state synthesis of a parent indole-based material. The quantitative transformation and preservation of high porosity are demonstrated by spectroscopic and gas adsorption techniques. For the first time, a highly efficient strategy is provided to construct multi-stimuli-responsive, yet structurally robust, spiropyran materials with high pore capacity which is proved essential for the reversible and quantitative isomerization in the bulk as demonstrated by solid-state NMR spectroscopy. The overall strategy allows to construct dynamic materials that undergoes reversible transformation of spiropyran to zwitterionic merocyanine, by chemical and physical stimulation, showing potential for pH active control, responsive gas uptake and release, contaminant removal, and water harvesting.

Two-Dimensional Covalent Organic Frameworks as Tailor-Made Scaffolds for Water Harvesting

Developing materials to harvest water from the air is of great importance to alleviate the water shortage for people living in arid regions, where the annual average relative humidity (RH) is lower than 0.4. In this work, we report a general nitrogen atom incorporation strategy to prepare high-performance covalent organic frameworks (COFs) for water harvesting from the air in arid areas. A series of COFs, namely COF-W1, COF-W2, and COF-W3 were developed for this purpose. Different contents of nitrogen were embedded into COFs by incorporating pyridine units into the building blocks. With the increasing content of nitrogen from COF-W1 to COF-W3, the inflection points of their water isotherms shift distinctly from RH values from 0.65 to 0.25. Significantly, COF-W3 exhibits the lowest inflection point at a low RH value of 0.25 and reaches a high uptake capacity of 0.28 g g-1 at 25 °C with a low hysteresis loop. Moreover, the gram-scale COF-W3 retains its high performance, which renders it more attractive in water harvesting. This work demonstrates the feasibility of this nitrogen incorporation strategy to acquire high-performance COFs as water harvesters in the future.

ChatGPT Research Group for Optimizing the Crystallinity of MOFs and COFs

We leveraged the power of ChatGPT and Bayesian optimization in the development of a multi-AI-driven system, backed by seven large language model-based assistants and equipped with machine learning algorithms, that seamlessly orchestrates a multitude of research aspects in a chemistry laboratory (termed the ChatGPT Research Group). Our approach accelerated the discovery of optimal microwave synthesis conditions, enhancing the crystallinity of MOF-321, MOF-322, and COF-323 and achieving the desired porosity and water capacity. In this system, human researchers gained assistance from these diverse AI collaborators, each with a unique role within the laboratory environment, spanning strategy planning, literature search, coding, robotic operation, labware design, safety inspection, and data analysis. Such a comprehensive approach enables a single researcher working in concert with AI to achieve productivity levels analogous to those of an entire traditional scientific team. Furthermore, by reducing human biases in screening experimental conditions and deftly balancing the exploration and exploitation of synthesis parameters, our Bayesian search approach precisely zeroed in on optimal synthesis conditions from a pool of 6 million within a significantly shortened time scale. This work serves as a compelling proof of concept for an AI-driven revolution in the chemistry laboratory, painting a future where AI becomes an efficient collaborator, liberating us from routine tasks to focus on pushing the boundaries of innovation.

Positional Isomers of Covalent Organic Frameworks for Indoor Humidity Regulation

Humidity is one of the most important indicators affecting human health. Here, a pair of covalent organic frameworks (COFs) of positional isomers (p-COF and o-COF) for indoor humidity regulation is reported. Although p-COF and o-COF have the same sql topology and pore size, they exhibit different water adsorption behaviors due to the subtle differences in water adsorption sites. Particularly, o-COF exhibits a steep adsorption isotherm in the range of 45-65% RH with a hysteresis loop, which is perfectly suitable for indoor humidity regulation. In the laboratory experiment, when the humidity of the external environment is 20-75% RH, o-COF can control the humidity of the room in the range of 45-60% RH. o-COF has shown great potential as a dual humidification/dehumidification adsorbent for indoor humidity regulation.

Construction of Thiadiazole-Linked Covalent Organic Frameworks via Facile Linkage Conversion with Superior Photocatalytic Properties

The establishment of facile synthetic routes to engineer covalent organic frameworks (COFs) with fully conjugated structure and excellent stability is highly desired for practical applications in optoelectronics and photocatalysis. Herein, a novel linkage conversion strategy is reported to prepare crystalline thiadiazole-linked COFs via thionation, cyclization, and oxidation of N-acylhydrazole bonds with Lawesson's reagent (LR). The as-prepared thiadiazole-linked COFs not only remain porosity and crystallinity, but enhance its chemical stability. Furthermore, thiadiazole-linked COFs are more favorable to lower exciton binding energy and promote π-electron delocalization over the whole reticular framework than N-acylhydrazone-linked COFs. Notably, the extended π-conjugation structure and decent crystallinity of the resulting TDA-COF are reflected by its higher photocatalytic H2 evolution rate (61.3 mmol g-1 in 5 h) in comparison with that (7.5 mmol g-1 ) of NAH-COF.

Regioselective One-Step Cyclization and Aromatization towards Directly Amino-Functionalized Covalent Organic Framework with Stable Benzodiimidazole Linkage

The compatibility of crystallinity, stability, and functionality in covalent organic frameworks (COFs) is challenging but significant in reticular chemistry and materials science. Herein, it is presented for the first time a strategy to synthesize directly amino-functionalized COF with stable benzodiimidazole linkage by regioselective one-step cyclization and aromatization. Bandrowski's base with two types of amino groups is used as a unique monomer, providing not only construction sites for the material framework through specific region-selective reaction, but also amino active sites for functionality, which is usually difficult to achieve directly in COF synthesis because amino groups are the participants in COF bonding. In addition, the aromatic benzodiimidazole rings and the large conjugated system of the product effectively improve the crystallinity and stability, so that the as-prepared BBCOF remains unchanged in both acid and base solutions, which is obviously better than the conventional imine-linked COF. Impressively, the significantly enhanced conjugation degree by the benzodiimidazole structure also endows BBCOF with an efficient photocatalytic reduction of uranyl ion, with removal rate as high as 96.6% in single-ion system and 95% in multi-ion system. This study is of great importance to the design and synthesis of functional COFs with a commendable trade-off among crystallinity, stability, and functionality.

Sorption-Based Atmospheric Water Harvesting: Materials, Components, Systems, and Applications

Freshwater scarcity is a global challenge posing threats to the lives and daily activities of humankind such that two-thirds of the global population currently experience water shortages. Atmospheric water, irrespective of geographical location, is considered as an alternative water source. Sorption-based atmospheric water harvesting (SAWH) has recently emerged as an efficient strategy for decentralized water production. SAWH thus opens up a self-sustaining source of freshwater that can potentially support the global population for various applications. In this review, the state-of-the-art of SAWH, considering its operation principle, thermodynamic analysis, energy assessment, materials, components, different designs, productivity improvement, scale-up, and application for drinking water, is first extensively explored. Thereafter, the practical integration and potential application of SAWH, beyond drinking water, for wide range of utilities in agriculture, fuel/electricity production, thermal management in building services, electronic devices, and textile are comprehensively discussed. The various strategies to reduce human reliance on natural water resources by integrating SAWH into existing technologies, particularly in underdeveloped countries, in order to satisfy the interconnected needs for food, energy, and water are also examined. This study further highlights the urgent need and future research directions to intensify the design and development of hybrid-SAWH systems for sustainability and diverse applications.

Sequential Water Sorption/Desorption of a Nonporous Adaptive Organic Ligand Bridged Coordination Polymer for Atmospheric Moisture Harvesting

Moisture harvesters with favourable attributes such as easy synthetic availability and good processability as alternatives for atmospheric moisture harvesting (AWH) are desirable. This study reports a novel nonporous anionic coordination polymer (CP) of uranyl squarate with methyl viologen (MV2+ ) as charge balancing ions (named U-Squ-CP) which displays intriguing sequential water sorption/desorption behavior as the relative humidity (RH) changes gradually. The evaluation of AWH performance of U-Squ-CP shows that it can absorb water vapor under air atmosphere at a low RH of 20 % typical of the levels found in most dry regions of the world, and have good cycling durability, thus demonstrating the capability as a potential moisture harvester for AWH. To the authors' knowledge, this is the first report on non-porous organic ligand bridged CP materials for AWH. Moreover, a stepwise water-filling mechanism for the water sorption/desorption process is deciphered by comprehensive characterizations combining single-crystal diffraction, which provides a reasonable explanation for the special moisture harvesting behaviour of this non-porous crystalline material.

Covalent organic frameworks for CO2 capture: from laboratory curiosity to industry implementation

CO2 concentration in the atmosphere has increased by about 40% since the 1960s. Among various technologies available for carbon capture, adsorption and membrane processes have been receiving tremendous attention due to their potential to capture CO2 at low costs. The kernel for such processes is the sorbent and membrane materials, and tremendous progress has been made in designing and fabricating novel porous materials for carbon capture. Covalent organic frameworks (COFs), a class of porous crystalline materials, are promising sorbents for CO2 capture due to their high surface area, low density, controllable pore size and structure, and preferable stabilities. However, the absence of synergistic developments between materials and engineering processes hinders achieving the qualitative leap for net-zero emissions. Considering the lack of a timely review on the combination of state-of-the-art COFs and engineering processes, in this Tutorial Review, we emphasize the developments of COFs for meeting the challenges of carbon capture and disclose the strategies of fabricating COFs for realizing industrial implementation. Moreover, this review presents a detailed and basic description of the engineering processes and industrial status of carbon capture. It highlights the importance of machine learning in integrating simulations of molecular and engineering levels. We aim to stimulate both academia and industry communities for joined efforts in bringing COFs to practical carbon capture.

Enhanced Water Sorption Performance of Polyacrylamide & Glass Fiber Paper Composites: Investigation and Comparison of Application in Desiccant Wheels

The water sorption and desorption properties of solid adsorbent materials are crucial in rotary dehumidification systems. Metal organic frameworks (MOFs) and hydrogels are mostly at the laboratory stage due to factors like the synthesis process and yield. In this study, we utilized an eco-friendly and large-scale synthesis method to prepare polyacrylamide (PAM) hydrogels (yielding approximately 500 mL from a single polymerization). Subsequently, PAM was then coated onto glass fiber paper (GFP), which serves as a commonly employed substrate in desiccant wheels. By incorporating the hygroscopic salt LiCl and optimizing the content of each component, the water sorption performance of the composite was notably improved. The water sorption and desorption performances, as well as cycling stability, were evaluated and compared with composites containing aluminum fumarate, LiCl, and GFP (AlFum-LiCl&GFP). The results revealed that PAM-LiCl&GFP outperformed AlFum-LiCl&GFP in terms of sorption capacity throughout various relative humidity (RH) levels. It achieved a water uptake of 1.06 g·g-1 at 25 °C and 30% RH, corresponding to a water sorption rate coefficient K of 15.32 × 10-4 s-1. Furthermore, the lower desorption temperature (60 °C) resulting in a desorption ratio of 82.6%, along with the excellent cycling stability and effective performance as a desiccant wheel module, provide evidence for the potential application of PAM-LiCl&GFP in desiccant wheels.

A Robust and Low-Cost Sulfonated Hypercrosslinked Polymer for Atmospheric Water Harvesting

The availability of freshwater is rapidly declining due to over-exploitation and climate change, with multiple parts of the globe already facing significant freshwater scarcity. Here, a sulfonated hypercrosslinked polymer able to repeatedly harvest significant amounts of water via direct air capture is reported. Water uptake from relative humidities as low as 10% is demonstrated, mimicking some of the harshest environments on Earth. A water harvesting device is used to show repeated uptake and harvesting without significant detriment to adsorbent performance. Desorption is triggered using simulated sunlight, presenting a low-energy route to water harvesting and adsorbent regeneration. The synthesis of sulfonated hypercrosslinked polymer requires only low-cost and readily available reagents, offering excellent potential for scale-up. Due to an almost limitless supply of water vapor from air in most regions around the globe, this approach can transform our ability to address water security concerns.

Symmetry-breaking dynamics in a tautomeric 3D covalent organic framework

The enolimine-ketoenamine tautomerism has been utilised to construct 2D covalent organic frameworks (COFs) with a higher level of chemical robustness and superior photoelectronic activity. However, it remains challenging to fully control the tautomeric states and correlate their tautomeric structure-photoelectronic properties due to the mobile equilibrium of proton transfer between two other atoms. We show that symmetry-asymmetry tautomerisation from diiminol to iminol/cis-ketoenamine can be stabilised and switched in a crystalline, porous, and dynamic 3D COF (dynaCOF-301) through concerted structural transformation and host-guest interactions upon removal and adaptive inclusion of various guest molecules. Specifically, the tautomeric dynaCOF-301 is constructed by linking the hydroquinone with a tetrahedral building block through imine linkages to form 7-fold interwoven diamondoid networks with 1D channels. Reversible framework deformation and ordering-disordering transition are determined from solvated to activated and hydrated phases, accompanied by solvatochromic and hydrochromic effects useful for rapid, steady, and visual naked-eye chemosensing.

Covalent Organic Framework Cladding on Peptide-Amphiphile-Based Biomimetic Catalysts

Peptide-based biomimetic catalysts are promising materials for efficient catalytic activity in various biochemical transformations. However, their lack of operational stability and fragile nature in non-aqueous media limit their practical applications. In this study, we have developed a cladding technique to stabilize biomimetic catalysts within porous covalent organic framework (COF) scaffolds. This methodology allows for the homogeneous distribution of peptide nanotubes inside the COF (TpAzo and TpDPP) backbone, creating strong noncovalent interactions that prevent leaching. We synthesized two different peptide-amphiphiles, C₁₀FFVK and C₁₀FFVR, with lysine (K) and arginine (R) at the C-termini, respectively, which formed nanotubular morphologies. The C₁₀FFVK peptide-amphiphile nanotubes exhibit enzyme-like behavior and efficiently catalyze C-C bond cleavage in a buffer medium (pH 7.5). We produced nanotubular structures of TpAzo-C₁₀FFVK and TpDPP-C₁₀FFVK through COF cladding by using interfacial crystallization (IC). The peptide nanotubes encased in the COF catalyze C-C bond cleavage in a buffer medium as well as in different organic solvents (such as acetonitrile, acetone, and dichloromethane). The TpAzo-C₁₀FFVK catalyst, being heterogeneous, is easily recoverable, enabling the reaction to be performed for multiple cycles. Additionally, the synthesis of TpAzo-C₁₀FFVK thin films facilitates catalysis in flow. As control, we synthesized another peptide-amphiphile, C₁₀FFVR, which also forms tubular assemblies. By depositing TpAzo COF crystallites on C₁₀FFVR nanotubes through IC, we produced TpAzo-C₁₀FFVR nanotubular structures that expectedly did not show catalysis, suggesting the critical role of the lysines in the TpAzo-C₁₀FFVK.

Emissive Substoichiometric Covalent Organic Frameworks for Water Sensing and Harvesting

Emissive covalent organic frameworks (COFs) have recently emerged as next-generation porous materials with attractive properties such as tunable topology, porosity, and inherent photoluminescence. Among the different types of COFs, substoichiometric frameworks (so-called Type III COFs) are especially attractive due to the possibility of not only generating unusual topology and complex pore architectures but also facilitating the introduction of well-defined functional groups at precise locations for desired functions. Herein, the first example of a highly emissive (PLQY 6.8%) substoichiometric 2D-COF (COF-SMU-1) featuring free uncondensed aldehyde groups is reported. In particular, COF-SMU-1 features a dual-pore architecture with an overall bex net topology, tunable emission in various organic solvents, and distinct colorimetric changes in the presence of water. To gain further insights into its photoluminescence properties, the charge transfer, excimer emission, and excited state exciton dynamics of COF-SMU-1 are investigated using femtosecond transient absorption spectroscopy in different organic solvents. Additionally, highly enhanced atmospheric water-harvesting properties of COF-SMU-1 are revealed using FT-IR and water sorption studies.The findings will not only lead to in-depth understanding of structure-property relationships in emissive COFs but also open new opportunities for designing COFs for potential applications in solid-state lighting and water harvesting.

Porous Materials for Atmospheric Water Harvesting

Atmospheric Water Harvesting (AWH) using porous adsorbents is emerging as a promising solution to combat water shortage. Thus, a clearer understanding of the developing trends and optimization strategies of different porous adsorbents can be extremely helpful. Therefore, in this concept, the different types of porous adsorbents and AWH devices are briefly introduced with a focus on the factors that influence the static and kinetic properties of porous adsorbents and their respective optimization strategies. In addition, the fast transport characteristics of water molecules in micropores are studied from the perspective of superfluidity as part of the analysis of the kinetic properties of porous adsorbents. Finally, the future development of porous materials for AWH and the accompanying challenges are summarized.

Covalent Organic Frameworks for Atmospheric Water Harvesting

Atmospheric water harvesting using reticular materials is an innovation that has the potential to change the world. Using covalent organic frameworks (COFs) for capturing water holds great promise because COFs are metal-free, stable under working conditions, and their structure can be intentionally designed to meet the requirements for this application. To promote the chemistry and use of COFs for atmospheric water harvesting, important features for synthesizing suitable water-harvesting COFs are discussed. The achievements of using COFs as water harvesters are then highlighted, showing how the water harvesting properties are related to the structural design. Finally, perspectives and research directions for further studies in COF chemistry are provided.

2D Covalent Organic Framework for Water Harvesting with Fast Kinetics and Low Regeneration Temperature

Atmospheric water harvesting represents a promising technique to address water stress. Advanced adsorbents have been rationally designed to achieve high water uptake, yet their water sorption kinetics and regeneration temperature greatly limit water production efficiency. Herein, we demonstrated that 2D covalent organic frameworks (COFs), featuring hydrophobic skeleton, proper hydrophilic site density, and 1D open channels significantly lowered the water diffusion and desorption energy barrier. DHTA-Pa COF showed a high water uptake of 0.48 g/g at 30 % R.H. with a remarkable adsorption rate of 0.72 L/Kg/h (298 K) and a desorption rate of 2.58 L/Kg/h (333 K). Moreover, more than 90 % adsorbed water could be released within 20 min at 313 K. This kinetic performance surpassed the reported porous materials and boosted the efficiency for multiple water extraction cycles. It may shed light on the material design strategy to achieve high daily water production with low-energy input.

Antiaromatic Covalent Organic Frameworks Based on Dibenzopentalenes

Despite their inherent instability, 4n π systems have recently received significant attention due to their unique optical and electronic properties. In dibenzopentalene (DBP), benzanellation stabilizes the highly antiaromatic pentalene core, without compromising its amphoteric redox behavior or small HOMO-LUMO energy gap. However, incorporating such molecules in organic devices as discrete small molecules or amorphous polymers can limit the performance (e.g., due to solubility in the battery electrolyte solution or low internal surface area). Covalent organic frameworks (COFs), on the contrary, are highly ordered, porous, and crystalline materials that can provide a platform to align molecules with specific properties in a well-defined, ordered environment. We synthesized the first antiaromatic framework materials and obtained a series of three highly crystalline and porous COFs based on DBP. Potential applications of such antiaromatic bulk materials were explored: COF films show a conductivity of 4 × 10^-8 S cm^-1 upon doping and exhibit photoconductivity upon irradiation with visible light. Application as positive electrode materials in Li-organic batteries demonstrates a significant enhancement of performance when the antiaromaticity of the DBP unit in the COF is exploited in its redox activity with a discharge capacity of 26 mA h g^-1 at a potential of 3.9 V vs. Li/Li⁺. This work showcases antiaromaticity as a new design principle for functional framework materials.

One-pot cascade construction of nonsubstituted quinoline-bridged covalent organic frameworks

Irreversible locking of imine linkages into stable linkages represents a promising strategy to improve the robustness and functionality of covalent organic frameworks (COFs). We report, for the first time, a multi-component one-pot reaction (OPR) for imine annulation to construct highly stable nonsubstituted quinoline-bridged COFs (NQ-COFs), and that equilibrium regulation of reversible/irreversible cascade reactions by addition of MgSO₄ desiccant is crucial to achieve high conversion efficiency and crystallinity. The higher long-range order and surface area of NQ-COFs synthesized by this OPR than those of the reported two-step post-synthetic modification (PSM) facilitate charge carrier transfer and photogeneration ability of superoxide radicals (O₂˙^-), which makes these NQ-COFs more efficient photocatalysts for O₂˙^- mediated synthesis of 2-benzimidazole derivatives. The general applicability of this synthetic strategy is demonstrated by fabricating 12 other crystalline NQ-COFs with a diversity of topologies and functional groups.

Confinement-Driven Photophysics in Hydrazone-Based Hierarchical Materials

Confinement-imposed photophysics was probed for novel stimuli-responsive hydrazone-based compounds demonstrating a conceptual difference in their behavior within 2D versus 3D porous matrices for the first time. The challenges associated with photoswitch isomerization arising from host interactions with photochromic compounds in 2D scaffolds could be overcome in 3D materials. Solution-like photoisomerization rate constants were realized for sterically demanding hydrazone derivatives in the solid state through their coordinative immobilization in 3D scaffolds. According to steady-state and time-resolved photophysical measurements and theoretical modeling, this approach provides access to hydrazone-based materials with fast photoisomerization kinetics in the solid state. Fast isomerization of integrated hydrazone derivatives allows for probing and tailoring resonance energy transfer (ET) processes as a function of excitation wavelength, providing a novel pathway for ET modulation.

Amide Linkages in Pyrene-Based Covalent Organic Frameworks toward Efficient Photocatalytic Reduction of Uranyl

The bond linkages in covalent organic frameworks (COFs) partly determine its physical and chemical properties, thus affecting the photoreactive activity by influencing the generation of photoelectrons and the separation of excitons. Herein, pyrene-based amide COF 4,4',4″,4‴-(pyrene-1,3,6,8-tetrayl)tetrabenzaldehyde-3,8-diamino-6-phenylphenanthridine (TFPPy-DP) was synthesized by postsynthetic modification of imine COFs. Due to the introduction of oxygen atoms into the framework and the change in polarity, an increased number of photogenerated electrons and a wide band gap for amide COFs were found, hydrophilicity and dispersibility were prompted as well. Both imine and amide COF TFPPy-DP were applied in the photocatalytic reduction and removal of toxic U(VI) under visible light, the catalytic reduction equilibrium (91% removal percentage of 238 ppm U at pH 3) was achieved by imine COFs with 10 h of irradiation, while amide COFs only took 2 h of irradiation (82% removal percentage). The much faster photocatalytic reduction rate of U(VI) can be attributed to the fact that amide COF TFPPy-DP retained crystallinity and permanent porosity and exhibited lower electrochemical impedance and enhanced charge separation and accumulation. Further electronic excitation analysis based on time-dependent density functional theory calculations revealed that the intramolecular charge-transfer effect in amide TFPPy-DP enhanced its photocatalytic rate.

A Highly Stable Ortho-Ketoenamine Covalent Organic Framework with Balanced Hydrophilic and Hydrophobic Sites for Atmospheric Water Harvesting

Atmospheric moisture is a sustainable clean water source that can solve the shortage of fresh water in arid areas. Herein a 2D covalent organic framework (COF-ok) was reported as a promising porous sorbent for solar-driven atmospheric water harvesting. COF-ok with ortho-ketoenamine linkage was extremely stable in harsh environment, including in boiling water, strong acids and bases. Because of the balanced hydrophilic and hydrophobic sites in channels, COF-ok showed a high water uptake of 0.33 g g^-1 at a low relative humidity of 34 % featuring a characteristic S-shaped water sorption isotherm with low regeneration temperature (∼45 °C) and excellent cyclic stability. A laboratory-scale water harvesting system could collect water of 161 g kg^-1 under sunlight.

Imine and imine-derived linkages in two-dimensional covalent organic frameworks

Covalent organic frameworks (COFs) are porous crystalline polymers that result from the formation of covalent bonds between precisely assembled organic units. Linkage chemistry is a crucial factor in the controllable synthesis and resulting physicochemical properties of COFs. Imine linkages are popular in the formation of polyfunctional two-dimensional (2D) COFs because they are formed easily with structural and functional diversity. There has been much recent interest in expanding beyond this to COFs with imine-derived linkages. This review highlights the development of chemistry to modify and prepare derivatives of imines within 2D COFs. We discuss the derivation of imine bonds via covalent and noncovalent bonding and the properties and potential applications of the resulting materials in order to provide a better understanding of the relationship between covalent linkages and overall performance for 2D COF materials.