Toward Controlled Hierarchical Heterogeneities in Giant Molecules with Precisely Arranged Nano Building Blocks

On-Demand Opioid Effect Reversal with an Injectable Light-Triggered Polymer-Naloxone Conjugate

Misuse of opioids can lead to a potential lethal overdose. Timely administration of naloxone is critical for survival. Here, we designed a polymer-naloxone conjugate that can provide on-demand phototriggered opioid reversal. Naloxone was attached to the polymer poly(lactic-co-glycolic acid) via a photocleavable coumarin linkage and formulated as injectable nanoparticles. In the absence of irradiation, the formulation did not release naloxone. Upon irradiation with blue (400 nm) light, the nanoparticles released free naloxone, reversing the effect of morphine in mice. Such triggered events could be performed days and weeks after the initial administration of the nanoparticles and could be performed repeatedly.

ABC-Type, Bola-Form Giant Surfactants: Synthesis and Self-Assembly

Due to the fast phase separation kinetics and small feature size, the self-assembly of giant molecules has attracted lots of attention. However, there is not much study on multicomponent giant surfactants. In this work, through a modular synthetic strategy, different polyhedral oligomeric silsesquioxane (POSS)-based molecular nanoparticles are installed with diverse functionalities (hydrophobic octavinyl POSS (VPOSS), hydrophilic dihydroxyl-functionalized POSS (DPOSS), and omniphobic perfluoroalkyl-chain-functionalized POSS (FPOSS)) on the ends of one polystyrene (PS) chain to build up a series of triblock bola-form giant surfactants denoted as XPOSS-PS_n -FPOSS (X represents V or D). The target molecules are prepared by a combination of atom transfer radical polymerization (ATRP), esterification, as well as Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) and thiol-ene "click" reactions. These macromolecules are thoroughly characterized by combined technologies including nuclear magnetic resonance (NMR), size exclusion chromatography (SEC), and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analyses. It is revealed by small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) that VPOSS-PS_n -FPOSS adopts a two-phase separation scenario where VPOSS and POSS are segregated in one phase. DPOSS-PS_n -FPOSS with a third hydrophilic DPOSS shows a three-phase separation scenario, where highly ordered phase structures are difficult to develop owing to the competition of mutual phase separation processes and may be trapped in kinetically metastable states.

Double-Decker-Shaped Polyhedral Silsesquioxanes Reinforced Epoxy/Bismaleimide Hybrids Featuring High Thermal Stability

In this study, we synthesized bismaleimide into a functionalized double-decker silsesquioxane (DDSQ) cage. This was achieved by hydrosilylation of DDSQ with nadic anhydride (ND), reacting it with excess p-phenylenediamine to obtain DDSQ-ND-NH₂, and treating with maleic anhydride (MA), which finally created a DDSQ-BMI cage structure. We observed that the thermal decomposition temperature (T_d) and char yield were both increased upon increasing the thermal polymerization temperature, and that these two values were both significantly higher than pure BMI without the DDSQ cage structure since the inorganic DDSQ nanoparticle could strongly enhance the thermal stability based on the nano-reinforcement effect. Based on FTIR, TGA, and DMA analyses, it was found that blending epoxy resin with the DDSQ-BMI cage to form epoxy/DDSQ-BMI hybrids could also enhance the thermal and mechanical properties of epoxy resin due to the organic/inorganic network formation created by the ring-opening polymerization of the epoxy group and the addition polymerization of the BMI group due to the combination of the inorganic DDSQ cage structure and hydrogen bonding effect. The epoxy/DDSQ-BMI = 1/1 hybrid system displayed high T_g value (188 °C), T_d value (397 °C), and char yield (40.4 wt%), which was much higher than that of the typical DGEBA type epoxy resin with various organic curing agents.

Superlattice Engineering with Chemically Precise Molecular Building Blocks

Correlating nanoscale building blocks with mesoscale superlattices, mimicking metal alloys, a rational engineering strategy becomes critical to generate designed periodicity with emergent properties. For molecule-based superlattices, nevertheless, nonrigid molecular features and multistep self-assembly make the molecule-to-superlattice correlation less straightforward. In addition, single component systems possess intrinsically limited volume asymmetry of self-assembled spherical motifs (also known as "mesoatoms"), further hampering novel superlattices' emergence. In the current work, we demonstrate that properly designed molecular systems could generate a spectrum of unconventional superlattices. Four categories of giant molecules are presented. We systematically explore the lattice-forming principles in unary and binary systems, unveiling how molecular stoichiometry, topology, and size differences impact the mesoatoms and further toward their superlattices. The presence of novel superlattices helps to correlate with Frank-Kasper phases previously discovered in soft matter. We envision the present work offers new insights about how complex superlattices could be rationally fabricated by scalable-preparation and easy-to-process materials.

Ordered Mesoporous Silica Pyrolyzed from Single-Source Self-Assembled Organic-Inorganic Giant Surfactants

We report the preparation of hexagonal mesoporous silica from single-source giant surfactants constructed via dihydroxyl-functionlized polyhedral oligomeric silsesquioxane (DPOSS) heads and a polystyrene (PS) tail. After thermal annealing, the obtained well-ordered hexagonal hybrid was pyrolyzed to afford well-ordered mesoporous silica. A high porosity (e.g., 581 m²/g) and a uniform and narrow pore size distribution (e.g., 3.3 nm) were achieved. Mesoporous silica in diverse shapes and morphologies were achieved by processing the precursor. When the PS tail length was increased, the pore size expanded accordingly. Moreover, such pyrolyzed, ordered mesoporous silica can help to increase both efficiency and stability of nanocatalysts.

Injectable catalyst-free "click" organic-inorganic nanohybrid (click-ON) cement for minimally invasive in vivo bone repair

Injectable polymers have attracted intensive attention in tissue engineering and drug delivery applications. Current injectable polymer systems often require free-radical or heavy-metal initiators and catalysts for the crosslinking process, which may be extremely toxic to the human body. Here, we report a novel polyhedral oligomeric silsesquioxane (POSS) based strain-promoted alkyne-azide cycloaddition (SPAAC) "click" organic-inorganic nanohybrids (click-ON) system that can be click-crosslinked without any toxic initiators or catalysts. The click-ON scaffolds supported excellent adhesion, proliferation, and osteogenesis of stem cells. In vivo evaluation using a rat cranial defect model showed outstanding bone formation with minimum cytotoxicity. Essential osteogenic alkaline phosphatase (ALP) and vascular CD31 marker expression were detected on the defect site, indicating excellent support of in vivo osteogenesis and vascularization. Using salt leaching techniques, an injectable porous click-ON cement was developed to create porous structures and support better in vivo bone regeneration. Beyond defect filling, the click-ON cement also showed promising application for spinal fusion using rabbits as a model. Compared to the current clinically used poly (methyl methacrylate) (PMMA) cement, this click-ON cement showed great advantages of low heat generation, better biocompatibility and biodegradability, and thus has great potential for bone and related tissue engineering applications.

Thickness control of 2D nanosheets assembled from precise side-chain giant molecules

The performance of 2D nanomaterials hinges on both the chemical compositions and the morphological structures across different length scales. Among all the three dimensions, thickness is the only one that falls into the nanometer scale and, to some extent, determines the intrinsic properties of 2D nanomaterials. In this study, we report the preparation and precise thickness control of 2D nanosheets assembled from a library of monodispersed amphiphilic giant molecules composed of functional polyhedral oligomeric silsesquioxanes (POSSs) as the side groups. Solution self-assembly of such giant molecules resulted in 2D nanosheets with similar structural configurations, where a bilayer of hydrophobic isobutyl POSS (BPOSS) is sandwiched by two monolayers of hydrophilic POSS bearing carboxylic acid groups (APOSS). The thickness of the obtained nanosheets could be tuned through adjusting the chemical compositions of the pendant POSS cages. Intriguingly, we found that the thickness of the 2D nanosheets was not necessarily proportional to the contour length of the giant molecule nor the total number of POSS cages tethered to the main chain. Indeed, the number ratio of BPOSS to APOSS, rather than the exact number, played a deterministic role in the thickness control. To explain the unusual thickness dependence, we built up a structure model with an in-plane orientation of the giant molecules in the nanosheets, from which a formula was further deduced to semi-quantitatively describe the inverse relationship between the overall thickness and the number ratio of BPOSS to APOSS.

Integrated POSS-dendrimer nanohybrid materials: current status and future perspective

Polyhedral oligomeric silsesquioxane (POSS)-dendrimer hybrid materials have attracted great interest in the past ten years. The integration of inorganic POSS and organic dendrimer blocks in a single-phase material offers numerous possibilities to access desirable mechanical, optical, and biomedical properties for various applications. In this review article, we describe several kinds of POSS-dendrimer hybrid materials (POSS as the core, surface functionality, repeating unit of dendrimers and the POSS-dendron conjugates) with an emphasis on their synthetic strategies, tunable macroscopic properties, and potential applications. Moreover, the current trends, challenges and future directions of POSS-dendrimer hybrid materials are elaborated.

Light-triggered release of conventional local anesthetics from a macromolecular prodrug for on-demand local anesthesia

An on-demand anesthetic that would only take effect when needed and where the intensity of anesthesia could be easily adjustable according to patients' needs would be highly desirable. Here, we design and synthesize a macromolecular prodrug (P407-CM-T) in which the local anesthetic tetracaine (T) is attached to the polymer poloxamer 407 (P407) via a photo-cleavable coumarin linkage (CM). P407-CM-T solution is an injectable liquid at room temperature and gels near body temperature. The macromolecular prodrug has no anesthetic effect itself unless irradiated with a low-power blue light emitting diode (LED), resulting in local anesthesia. By adjusting the intensity and duration of irradiation, the anesthetic effect can be modulated. Local anesthesia can be repeatedly triggered.

Functionalized Multiarmed Polycaprolactones as Biocompatible Tissue Adhesives

Existing tissue adhesives have a trade-off between adhesive strength and biocompatibility. Here, we report a series of biocompatible multiarmed polycaprolactones (PCL) as tissue adhesives that can be released from a hot glue gun and the length of each arm was kept at ∼2-3 kg mol^-1 in all the polymers. The adhesion properties were dependent on the number of functionalized (N-hydroxysuccinimide ester (NHS), aldehyde (CHO), and isocyanate (NCO)) arms of the multiarmed polymers. The more arms, the higher the adhesion strength. For example, the adhesion strength in binding cut rat skin increased from 2.3 N cm^-2 for 2PCL-NHS to 11.2 N cm^-2 for 8-PCL-NHS. CHO- and NCO-modified 8PCL also had suitable adhesive properties. All the multiarmed polymers had minimal cytotoxicity in vitro and good biocompatibility in vivo, suggesting their potential as promising alternative surgical adhesives.

Main Chain-Type Block Copolymers through Atom Transfer Radical Polymerization from Double-Decker-Shaped Polyhedral Oligomeric Silsesquioxane Hybrids

In this study, we synthesized two main chain-type block copolymers featuring hydrogen bond donor and acceptor segments through atom transfer radical polymerization (ATRP) using a bifunctionalized polyhedral oligomeric silsesquioxane (POSS) nanoparticle as the initiator. Hydrosilylation of vinylbenzyl chloride at the two corners of a double-decker silsesquioxane (DDSQ) provided the bifunctionalized benzyl chloride initiator VBC-DDSQ-VBC, which we applied as a platform to prepare a main chain-type polystyrene homopolymer (PS-DDSQ-PS), the diblock copolymer poly(styrene-b-4-vinylpyridine) (P4VP-b-PS-DDSQ-PS-b-P4VP), and the diblock copolymer poly(styrene-b-tert-butoxystyrene) (PtBuOS-b-PS-DDSQ-PS-b-PtBuOS) through sequential ATRP. Selective hydrolysis of the tert-butoxyl units of PtBuOS-b-PS-DDSQ-PS-b-PtBuOS yielded the strongly hydrogen bonding diblock copolymer poly (styrene-b-vinylphenol) (PVPh-b-PS-DDSQ-PS-b-PVPh). We used Fourier transfer infrared spectroscopy, nuclear magnetic resonance spectroscopy, size exclusion chromatography, differential scanning calorimetry, mass-analyzed laser desorption ionization mass spectrometry, and transmission electron microscopy to investigate the chemical structures, thermal behavior, and self-assembled nanostructures formed by these main chain-type block copolymers based on DDSQ.

Magnifying the Structural Components of Biomembranes: A Prototype for the Study of the Self-Assembly of Giant Lipids

How biomembranes are self-organized to perform their functions remains a pivotal issue in biological and chemical science. Understanding the self-assembly principles of lipid-like molecules hence becomes crucial. Herein, we report the mesostructural evolution of amphiphilic sphere-rod conjugates (giant lipids), and study the roles of geometric parameters (head-tail ratio and cross-sectional area) during this course. As a prototype system, giant lipids resemble natural lipidic molecules by capturing their essential features. The self-assembly behavior of two categories of giant lipids (I-shape and T-shape, a total of 8 molecules) is demonstrated. A rich variety of mesostructures is constructed in solution state and their molecular packing models are rationally understood. Giant lipids recast the phase behavior of natural lipids to a certain degree and the abundant self-assembled morphologies reveal distinct physiochemical behaviors when geometric parameters deviate from natural analogues.

Self-Assembled Copolymer Adsorption Layer-Induced Block Copolymer Nanostructures in Thin Films

In polymer thin films, the bottom polymer chains are irreversibly adsorbed onto the substrates creating an ultrathin layer. Although this thin layer (only a few nanometers thick) governs all film properties, an understanding of this adsorbed layer remains elusive, and thus, its effective control has yet to be achieved, particularly in block copolymer (BCP) thin films. Herein, we employ self-assembled copolymer adsorption layers (SCALs), transferred from the air/water interfacial self-assembly of BCPs, as an effective control of the adsorbed layer in BCP thin films. SCALs replace the natural adsorbed layer, irreversibly adsorbing onto the substrates when other BCP is additionally coated on the SCALs. We further show that SCALs guide the thin film nanostructures because they provide topological restrictions and enthalpic/entropic preferences for a BCP self-assembly. The SCAL-induced self-assembly enables unprecedented control of nanostructures, creating novel nanopatterns such as spacing-controlled hole/dot patterns, dotted-line patterns, dash-line patterns, and anisotropic cluster patterns with exceptional controllability.

Engineering self-assembly of giant molecules in the condensed state based on molecular nanoparticles

In biological systems, it is well-known that the activities and functions of biomacromolecules are dictated not only by their primary chemistries, but also by their secondary, tertiary, and quaternary hierarchical structures. Achieving control of similar levels in synthetic macromolecules is yet to be demonstrated. Most of the critical molecular parameters associated with molecular and hierarchical structures, such as size, composition, topology, sequence, and stereochemistry, are heterogenous, which impedes the exploration and understanding of structure formation and manipulation. Alternatively, in the past few years we have developed a unique giant molecule system based on molecular nanoparticles, in which the above-mentioned molecular parameters, as well as interactions, are precisely defined and controlled. These molecules could self-assemble into a myriad of unconventional and unique structures in the bulk, thin films, and solution. Giant molecules thus offer a robust platform to manipulate the hierarchical structures via precise and modular assemblies of building blocks in an amplified size level compared with small molecules. It has been found that they are not only scientifically intriguing, but also technologically relevant.

Injectable Catalyst-Free Poly(Propylene Fumarate) System Cross-Linked by Strain Promoted Alkyne-Azide Cycloaddition Click Chemistry for Spine Defect Filling

A new PPF-BCN/hyPCL32-N3 injectable system that can be cross-linked by catalyst-free, strain promoted alkyne-azide cycloaddition (SPAAC) click chemistry was developed for tissue engineering applications. The system consisted of two components: PPF-BCN, poly(propylene fumarate) (PPF) functionalized with (1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-ylmethanol (BCN-OH), and hyPCL32-N3, a hyper-branched 32-arm poly(ε-caprolactone) (PCL) dendrimer functionalized with azide as the cross-linker core. Fast SPAAC click reaction allowed the desired gelation of the system without using any toxic initiator or catalyst. Compared to the conventional injectable formulation, e.g., poly(methyl methacrylate) (PMMA), our PPF-BCN/hyPCL32-N3 (abbreviated as PFCL-Click) injectable system showed enhanced biocompatibility and low heat generation during cross-linking. After reaction, the cross-linked PFCL-Click scaffolds supported excellent proliferation and differentiation of preosteoblast cells on the surface. The PFCL-Click system can be successfully injected into vertebral bodies of rabbit spine and can be monitored by X-ray imaging after incorporating zirconium dioxide (ZrO2) powder. With these unique advantages, this injectable system has promising potential for bone defect repair and other tissue engineering and regenerative medicine applications.

Encoding biological recognition in a bicomponent cell-membrane mimic

Self-assembling dendrimers have facilitated the discovery of periodic and quasiperiodic arrays of supramolecular architectures and the diverse functions derived from them. Examples are liquid quasicrystals and their approximants plus helical columns and spheres, including some that disregard chirality. The same periodic and quasiperiodic arrays were subsequently found in block copolymers, surfactants, lipids, glycolipids, and other complex molecules. Here we report the discovery of lamellar and hexagonal periodic arrays on the surface of vesicles generated from sequence-defined bicomponent monodisperse oligomers containing lipid and glycolipid mimics. These vesicles, known as glycodendrimersomes, act as cell-membrane mimics with hierarchical morphologies resembling bicomponent rafts. These nanosegregated morphologies diminish sugar-sugar interactions enabling stronger binding to sugar-binding proteins than densely packed arrangements of sugars. Importantly, this provides a mechanism to encode the reactivity of sugars via their interaction with sugar-binding proteins. The observed sugar phase-separated hierarchical arrays with lamellar and hexagonal morphologies that encode biological recognition are among the most complex architectures yet discovered in soft matter. The enhanced reactivity of the sugar displays likely has applications in material science and nanomedicine, with potential to evolve into related technologies.

Analysis of monodisperse, sequence-defined, and POSS-functionalized polyester copolymers by MALDI tandem mass spectrometry

Monodisperse, sequence-defined polymers can be potentially used for digital data storage. This study reports the sequence analysis and differentiation of monodisperse polyester copolymers carrying side chains functionalized in a specific order by polyhedral oligomeric silsesquioxane (POSS) nanoparticles. Steglich esterification and succinic anhydride ring-opening chemistries were utilized iteratively to synthesize the intended sequences, which were characterized by matrix-assisted laser desorption ionization tandem mass spectrometry (MALDI-MS²). Isomeric oligomers were readily distinguished based on their different fragmentation patterns. The sequences embedded in the oligomers were decrypted by their specific backbone dissociation pathways. The robustness of using MALDI-MS² as a sequencing method for monodisperse synthetic macromolecules was assessed and validated by the characterization of longer oligomers.

Sequence isomeric giant surfactants with distinct self-assembly behaviors in solution

Two sequence isomeric giant surfactants exhibit distinguished self-assembly behaviors, which is caused by the different molecular packing conformations induced by their distinct molecular sequences.

Effect of Fullerene Volume Fraction on Two-Dimensional Crystal-Constructed Supramolecular Liquid Crystals

The volume fraction plays an important role in phase segregated soft matters. We demonstrate here that at high fullerene volume fraction in soft chain-tethered-fullerene dyads, different two-dimensional (2D) crystal-constructed smectic-like lamella liquid crystalline (LC) phases can be formed with triple-layer (S_T phase) or quadruple-layer (S_Q phase) stacking of fullerenes in 2D crystals. The combination of 2D crystal and LC properties in one system affords these fullerene dyads controlled electron mobility in the range of 10^-5 -10^-3  cm²  V^-1  s^-1 at room temperature (S_T phase), by regulating the insulated soft layer thickness between 2D crystals via the manipulation of fullerene volume fraction.

Screening Libraries of Amphiphilic Janus Dendrimers Based on Natural Phenolic Acids to Discover Monodisperse Unilamellar Dendrimersomes

Natural, including plant, and synthetic phenolic acids are employed as building blocks for the synthesis of constitutional isomeric libraries of self-assembling dendrons and dendrimers that are the simplest examples of programmed synthetic macromolecules. Amphiphilic Janus dendrimers are synthesized from a diversity of building blocks including natural phenolic acids. They self-assemble in water or buffer into vesicular dendrimersomes employed as biological membrane mimics, hybrid and synthetic cells. These dendrimersomes are predominantly uni- or multilamellar vesicles with size and polydispersity that is predicted by their primary structure. However, in numerous cases, unilamellar dendrimersomes completely free of multilamellar assemblies are desirable. Here, we report the synthesis and structural analysis of a library containing 13 amphiphilic Janus dendrimers containing linear and branched alkyl chains on their hydrophobic part. They were prepared by an optimized iterative modular synthesis starting from natural phenolic acids. Monodisperse dendrimersomes were prepared by injection and giant polydisperse by hydration. Both were structurally characterized to select the molecular design principles that provide unilamellar dendrimersomes in higher yields and shorter reaction times than under previously used reaction conditions. These dendrimersomes are expected to provide important tools for synthetic cell biology, encapsulation, and delivery.

Fabrication of Acidic pH-Cleavable Polymer for Anticancer Drug Delivery Using a Dual Functional Monomer

The preparation of tumor acidic pH-cleavable polymers generally requires tedious postpolymerization modifications, leading to batch-to-batch variation and scale-up complexity. To develop a facile and universal strategy, we reported in this study design and successful synthesis of a dual functional monomer, a-OEGMA that bridges a methacrylate structure and oligo(ethylene glycol) (OEG) units via an acidic pH-cleavable acetal link. Therefore, a-OEGMA integrates (i) the merits of commercially available oligo(ethylene glycol) monomethyl ether methacrylate (OEGMA) monomer, i.e., hydrophilicity for extracellular stabilization of particulates and a polymerizable methacrylate for adopting controlled living radical polymerization (CLRP), and (ii) an acidic pH-cleavable acetal link for efficiently intracellular destabilization of polymeric carriers. To demonstrate the advantages of a-OEGMA ( M_n = 500 g/mol) relative to the commercially available OEGMA ( M_n = 300 g/mol) for drug delivery applications, we prepared both acidic pH-cleavable poly(ε-caprolactone)₂₁- b-poly( a-OEGMA)₁₁ (PCL₂₁- b-P( a-OEGMA)₁₁) and pH-insensitive analogues of PCL₂₁- b-P(OEGMA)₁₈ with an almost identical molecular weight (MW) of approximately 5.0 kDa for the hydrophilic blocks by a combination of ring-opening polymerization (ROP) of ε-CL and subsequent atom transfer radical polymerization (ATRP) of a-OEGMA or OEGMA. The pH-responsive micelles self-assembled from PCL₂₁- b-P( a-OEGMA)₁₁ showed sufficient salt stability, but efficient acidic pH-triggered aggregation that was confirmed by the DLS and TEM measurements as well as further characterizations of the products after degradation. In vitro drug release study revealed significantly promoted drug release at pH 5.0 relative to the release profile recorded at pH 7.4 due to the loss of colloidal stability and formation of micelle aggregates. The delivery efficacy evaluated by flow cytometry analyses and an in vitro cytotoxicity study in A549 cells further corroborated greater cellular uptake and cytotoxicity of Dox-loaded pH-sensitive micelles of PCL₂₁- b-P( a-OEGMA)₁₁ relative to the pH-insensitive analogues of PCL₂₁- b-P(OEGMA)₁₈. This study therefore presents a facile and robust means toward tumor acidic pH-responsive polymers as well as provides one solution to the trade-off between extracellular stability and intracellular high therapeutic efficacy of drug delivery systems using a novel monomer of a-OEGMA with dual functionalities.

Multilevel Manipulation of Supramolecular Structures of Giant Molecules via Macromolecular Composition and Sequence

We have successfully synthesized a series of monodispersed chain-like giant molecules with precisely controlled macromolecular composition and sequence based on polyhedral oligomeric silsesquioxane (POSS) nanoparticles using an orthogonal "click" strategy. Their nonspherical supramolecular structures, such as lamellae, double gyroids, and hexagonal packed cylinders, are mainly determined by the composition (namely, the number of incorporated amphiphilic nanoparticles). In addition, by precisely alternating the sequence of arranged nanoparticles in the giant molecules with identical chemical compositions, the domain sizes of their supramolecular structures could be fine-tuned. This is attributed to the macromolecular conformational differences caused by collective hydrogen bonding interactions in each set of sequence isomeric giant molecules. This work has demonstrated multilevel manipulation of supramolecular structures of giant molecules: coarse tuning by composition and fine-tuning by sequence.

Highly Asymmetric Phase Behaviors of Polyhedral Oligomeric Silsesquioxane-Based Multiheaded Giant Surfactants

This work reports the molecular design, synthesis, and systematic study on the bulk self-assembly behaviors of three series of polyhedral oligomeric silsesquioxane (POSS)-based multiheaded giant surfactants XDPOSS-PS_n (X = 2, 3, and 4), which are composed of two, three, or four hydrophilic hydroxyl-group-functionalized DPOSS cages attached via one junction point to a hydrophobic polystyrene (PS) chain. These series of hybrid polymeric amphiphiles with precisely defined chemical structure and controllable molecular architecture are synthesized by the sequential usage of "click" reactions. By tuning molecular weights of the PS tail, we established full phase diagrams of XDPOSS-PS_n as a function of the volume fractions of PS chains (V_f^PS). We found that the self-assembled structures were greatly influenced by the molecular architecture. Strikingly, our results showed that the lamellar morphology, which usually existed at relatively symmetric compositions in common diblock copolymers, became the thermodynamically stable phase in the 3DPOSS-PS_n and 4DPOSS-PS_n samples even at an asymmetric composition up to V_f^PS = 0.842, with the ratio between the thicknesses of PS and DPOSS lamellae up to 5.32. This unusual phenomenon induced by molecular architectural variation could be explained by the large cross-sectional area of DPOSS cages at the nanophase-separated domain interface and high elastic deformation energy of clustered DPOSS cages which have relatively rigid conformation. The unique bulk self-assembly behaviors in our POSS-based multiheaded giant surfactants provide insights in developing hybrid nanomaterials toward unconventional nanostructures.

Promotion of micelle stability via a cyclic hydrophilic moiety

A cyclic hydrophilic moiety promotes stability of polymeric micelles significantly.

Sequence-Mandated, Distinct Assembly of Giant Molecules

Although controlling the primary structure of synthetic polymers is itself a great challenge, the potential of sequence control for tailoring hierarchical structures remains to be exploited, especially in the creation of new and unconventional phases. A series of model amphiphilic chain-like giant molecules was designed and synthesized by interconnecting both hydrophobic and hydrophilic molecular nanoparticles in precisely defined sequence and composition to investigate their sequence-dependent phase structures. Not only compositional variation changed the self-assembled supramolecular phases, but also specific sequences induce unconventional phase formation, including Frank-Kasper phases. The formation mechanism was attributed to the conformational change driven by the collective hydrogen bonding and the sequence-mandated topology of the molecules. These results show that sequence control in synthetic polymers can have a dramatic impact on polymer properties and self-assembly.

Hierarchical Self-Organization of AB n Dendron-like Molecules into a Supramolecular Lattice Sequence

To understand the hierarchical self-organization behaviors of soft materials as well as their dependence on molecular geometry, a series of AB n dendron-like molecules based on polyhedral oligomeric silsesquioxane (POSS) nanoparticles were designed and synthesized. The apex of these molecules is a hydrophilic POSS cage with 14 hydroxyl groups (denoted DPOSS). At its periphery, there are different numbers (n = 1-8) of hydrophobic POSS cages with seven isobutyl groups (denoted BPOSS), connected to the apical DPOSS via flexible dendron type linker(s). By varying the BPOSS number from one to seven, a supramolecular lattice formation sequence ranging from lamella (DPOSS-BPOSS), double gyroid (space group of Ia3̅d, DPOSS-BPOSS2), hexagonal cylinder (plane group of P6mm, DPOSS-BPOSS3), Frank-Kasper A15 (space group of Pm3̅n, DPOSS-BPOSS4, DPOSS-BPOSS5, and DPOSS-BPOSS6), to Frank-Kasper sigma (space group of P42/mnm, DPOSS-BPOSS7) phases can be observed. The nanostructure formations in this series of AB n dendron-like molecules are mainly directed by the molecular geometric shapes. Furthermore, within each spherical motif, the spherical core consists hydrophilic DPOSS cages with flexible linkages, while the hydrophobic BPOSS cages form the relative rigid shell, and contact with neighbors to provide decreased interfaces among the spherical motifs for constructing final polyhedral motifs in these Frank-Kasper lattices. This study provides the design principle of molecules with specific geometric shapes and functional groups to achieve anticipated structures and macroscopic properties.