Electron Transfer Control of Reductase versus Monooxygenase: Catalytic C-H Bond Hydroxylation and Alkene Epoxidation by Molecular Oxygen

Efficient Inhibition of Deep Conversion of Partial Oxidation Products in C-H Bonds' Functionalization Utilizing O2 via Relay Catalysis of Dual Metalloporphyrins on Surface of Hybrid Silica Possessing Capacity for Product Exclusion

To inhibit the deep conversion of partial oxidation products (POX-products) in C-H bonds' functionalization utilizing O2, 5-(4-(chloromethyl)phenyl)-10,15,20-tris(perfluorophenyl)porphyrin cobalt(II) and 5-(4-(chloromethyl)phenyl)-10,15,20-tris(perfluorophenyl)porphyrin copper(II) were immobilized on the surface of hybrid silica to conduct relay catalysis on the surface. Fluorocarbons with low polarity and heterogeneous catalysis were devised to decrease the convenient accessibility of polar POX-products to catalytic centers on the lower polar surface. Relay catalysis between Co and Cu was designed to utilize the oxidation intermediates alkyl hydroperoxides to transform more C-H bonds. Systematic characterizations were conducted to investigate the structure of catalytic materials and confirm their successful syntheses. Applied to C-H bond oxidation, not only deep conversion of POX-products was inhibited but also substrate conversion and POX-product selectivity were improved simultaneously. For cyclohexane oxidation, conversion was improved from 3.87% to 5.27% with selectivity from 84.8% to 92.3%, which was mainly attributed to the relay catalysis on the surface excluding products. The effects of the catalytic materials, product exclusion, relay catalysis, kinetic study, substrate scope, and reaction mechanism were also investigated. To our knowledge, a practical and novel strategy was presented to inhibit the deep conversion of POX-products and to achieve efficient and accurate oxidative functionalization of hydrocarbons. Also, a valuable protocol was provided to avoid over-reaction in other chemical transformations requiring high selectivity.

How Do Differences in Electronic Structure Affect the Use of Vanadium Intermediates as Mimics in Nonheme Iron Hydroxylases?

We study active-site models of nonheme iron hydroxylases and their vanadium-based mimics using density functional theory to determine if vanadyl is a faithful structural mimic. We identify crucial structural and energetic differences between ferryl and vanadyl isomers owing to the differences in their ground electronic states, i.e., high spin (HS) for Fe and low spin (LS) for V. For the succinate cofactor bound to the ferryl intermediate, we predict facile interconversion between monodentate and bidentate coordination isomers for ferryl species but difficult rearrangement for vanadyl mimics. We study isomerization of the oxo intermediate between axial and equatorial positions and find the ferryl potential energy surface to be characterized by a large barrier of ca. 10 kcal/mol that is completely absent for the vanadyl mimic. This analysis reveals even starker contrasts between Fe and V in hydroxylases than those observed for this metal substitution in nonheme halogenases. Analysis of the relative bond strengths of coordinating carboxylate ligands for Fe and V reveals that all of the ligands show stronger binding to V than Fe owing to the LS ground state of V in contrast to the HS ground state of Fe, highlighting the limitations of vanadyl mimics of native nonheme iron hydroxylases.

Synthetic dioxygenase reactivity by pairing electrochemical oxygen reduction and water oxidation

The reactivity of molecular oxygen is crucial to clean energy technologies and green chemical synthesis, but kinetic barriers complicate both applications. In synthesis, dioxygen should be able to undergo oxygen atom transfer to two organic molecules with perfect atom economy, but such reactivity is rare. Monooxygenase enzymes commonly reductively activate dioxygen by sacrificing one of the oxygen atoms to generate a more reactive oxidant. Here, we used a manganese-tetraphenylporphyrin catalyst to pair electrochemical oxygen reduction and water oxidation, generating a reactive manganese-oxo at both electrodes. This process supports dioxygen atom transfer to two thioether substrate molecules, generating two equivalents of sulfoxide with a single equivalent of dioxygen. This net dioxygenase reactivity consumes no electrons but uses electrochemical energy to overcome kinetic barriers.

Iron Dioxygen Adduct Formed during Electrochemical Oxygen Reduction by Iron Porphyrins Shows Catalytic Heme Dioxygenase Reactivity

Heme dioxygenases oxidize the indole ring of tryptophan to kynurenine which is the first step in the biosynthesis of several important biomolecules like NAD, xanthurenic acid, and picolinic acid. A ferrous heme dioxygen adduct (or FeIII-O2•-) is the oxidant, and both the atoms of O2 are inserted in the product and its catalytic function has been difficult to emulate as it is complicated by competing rapid reactions like auto-oxidation and/or formation of the μ-oxo dimer. In situ resonance Raman spectroscopy technique, SERRS-RDE, is used to probe the species accumulated during electrochemical ORR catalyzed by site-isolated imidazole-bound iron porphyrin installed on a self-assembled monolayer covered electrode. These in situ SERRS-RDE data using labeled O2 show that indeed a FeIII-O2•- species accumulate on the electrode during ORR between -0.05 and -0.30 V versus Ag/AgCl (satd. KCl) and is reduced by proton coupled electron transfer to a FeIII-OOH species which, on the other hand, builds up on the electrode between -0.20 and -0.40 V versus Ag/AgCl (satd. KCl). This FeIII-OOH species then gives way to a FeIV═O species, which accumulates at -0.50 V versus Ag/AgCl (satd. KCl). When 2,3-dimethylindole is present in the solution and the applied potential is held in the range where FeIII-O2•- species accumulate, it gets oxidized to N-(2-acetylphenyl)acetamide retaining both the oxygens from O2 mimicking the reaction of heme dioxygenases. Turnover numbers more than 104 are recorded, establishing this imidazole-bound ferrous porphyrin as a functional model of heme dioxygenases.

Highly regioselective oxidation of C-H bonds in water using hydrogen peroxide by a cytochrome P450 mimicking iron complex

Cytochrome P450, one of nature's oxidative workhorses, catalyzes the oxidation of C-H bonds in complex biological settings. Extensive research has been conducted over the past five decades to develop a fully functional mimic that activates O2 or H2O2 in water to oxidize strong C-H bonds. We report the first example of a synthetic iron complex that functionally mimics cytochrome P450 in 100% water using H2O2 as the oxidant. This iron complex, in which one methyl group is replaced with a phenyl group in either wing of the macrocycle, oxidized unactivated C-H bonds in small organic molecules with very high selectivity in water (pH 8.5). Several substrates (34 examples) that contained arenes, heteroaromatics, and polar functional groups were oxidized with predictable selectivity and stereoretention with moderate to high yields (50-90%), low catalyst loadings (1-4 mol%) and a small excess of H2O2 (2-3 equiv.) in water. Mechanistic studies indicated the oxoiron(v) to be the active intermediate in water and displayed unprecedented selectivity towards 3° C-H bonds. Under single-turnover conditions, the reactivity of this oxoiron(v) intermediate in water was found to be around 300 fold higher than that in CH3CN, thus implying the role water plays in enzymatic systems.

Electrochemical transformations catalyzed by cytochrome P450s and peroxidases

Cytochrome P450s (Cyt P450s) and peroxidases are enzymes featuring iron heme cofactors that have wide applicability as biocatalysts in chemical syntheses. Cyt P450s are a family of monooxygenases that oxidize fatty acids, steroids, and xenobiotics, synthesize hormones, and convert drugs and other chemicals to metabolites. Peroxidases are involved in breaking down hydrogen peroxide and can oxidize organic compounds during this process. Both heme-containing enzymes utilize active Fe^IVO intermediates to oxidize reactants. By incorporating these enzymes in stable thin films on electrodes, Cyt P450s and peroxidases can accept electrons from an electrode, albeit by different mechanisms, and catalyze organic transformations in a feasible and cost-effective way. This is an advantageous approach, often called bioelectrocatalysis, compared to their biological pathways in solution that require expensive biochemical reductants such as NADPH or additional enzymes to recycle NADPH for Cyt P450s. Bioelectrocatalysis also serves as an ex situ platform to investigate metabolism of drugs and bio-relevant chemicals. In this paper we review biocatalytic electrochemical reactions using Cyt P450s including C-H activation, S-oxidation, epoxidation, N-hydroxylation, and oxidative N-, and O-dealkylation; as well as reactions catalyzed by peroxidases including synthetically important oxidations of organic compounds. Design aspects of these bioelectrocatalytic reactions are presented and discussed, including enzyme film formation on electrodes, temperature, pH, solvents, and activation of the enzymes. Finally, we discuss challenges and future perspective of these two important bioelectrocatalytic systems.

Efficient and Selective Oxygenation of Cycloalkanes and Alkyl Aromatics with Oxygen through Synergistic Catalysis of Bimetallic Active Centers in Two-Dimensional Metal-Organic Frameworks Based on Metalloporphyrins

Confined catalytic realms and synergistic catalysis sites were constructed using bimetallic active centers in two-dimensional metal-organic frameworks (MOFs) to achieve highly selective oxygenation of cycloalkanes and alkyl aromatics with oxygen towards partly oxygenated products. Every necessary characterization was carried out for all the two-dimensional MOFs. The selective oxygenation of cycloalkanes and alkyl aromatics with oxygen was accomplished with exceptional catalytic performance using two-dimensional MOF Co-TCPPNi as a catalyst. Employing Co-TCPPNi as a catalyst, both the conversion and selectivity were improved for all the hydrocarbons investigated. Less disordered autoxidation at mild conditions, inhibited free-radical diffusion by confined catalytic realms, and synergistic C-H bond oxygenation catalyzed by second metal center Ni employing oxygenation intermediate R-OOH as oxidant were the factors for the satisfying result of Co-TCPPNi as a catalyst. When homogeneous metalloporphyrin T(4-COOCH3)PPCo was replaced by Co-TCPPNi, the conversion in cyclohexane oxygenation was enhanced from 4.4% to 5.6%, and the selectivity of partly oxygenated products increased from 85.4% to 92.9%. The synergistic catalytic mechanisms were studied using EPR research, and a catalysis model was obtained for the oxygenation of C-H bonds with O2. This research offered a novel and essential reference for both the efficient and selective oxygenation of C-H bonds and other key chemical reactions involving free radicals.

Voltage-Gated Electrocatalysis of Efficient and Selective Methane Oxidation by Tricopper Clusters under Ambient Conditions

Selective methane oxidation is difficult chemistry. Here we describe a strategy for the electrocatalysis of selective methane oxidation by immobilizing tricopper catalysts on the cathodic surface. In the presence of dioxygen and methane, the activation of these catalysts above a threshold cathodic potential can initiate the dioxygen chemistry for O atom transfer to methane. The catalytic turnover is completed by facile electron injections into the tricopper catalysts from the electrode. This technology leads to dramatic enhancements in performance of the catalysts toward methane oxidation. Unprecedented turnover frequencies (>40 min^-1) and high product throughputs (turnover numbers >30 000 in 12 h) are achieved for this challenging chemical transformation in water under ambient conditions. The technology is green and suitable for on-site direct conversion of methane into methanol.

Recent developments in the synthesis of bio-inspired iron porphyrins for small molecule activation

Nature utilizes a diverse set of tetrapyrrole-based macrocycles (referred to as porphyrinoids) for catalyzing various biological processes. Investigation of the differences in electronic structure and reactivity in these reactions have revealed striking differences that lead to diverse reactivity from, apparently, similar looking active sites. Therefore, the role of the different heme cofactors as well as the distal superstructure in the proteins is important to understand. This article summarizes the role of a few synthetic metallo-porphyrinoids towards catalyzing several small molecule activation reactions, such as the ORR, NiRR, CO₂RR, etc. The major focus of the article is to enlighten the synthetic routes to the well-decorated active-site mimic in a tailor-made fashion pursuing a retrosynthetic approach, learning from the biosynthesis of the cofactors. Techniques and the role of the second-sphere residues on the reaction rate, selectivity, etc. are incorporated emulating the basic amino acid residues fencing the active sites. These bioinspired mimics play an important role towards understanding the role of the prosthetic groups as well as the basic residues towards any reaction occurring in Nature.

Bioinorganic Chemistry on Electrodes: Methods to Functional Modeling

One of the major goals of bioinorganic chemistry has been to mimic the function of elegant metalloenzymes. Such functional modeling has been difficult to attain in solution, in particular, for reactions that require multiple protons and multiple electrons (nH⁺/ne^-). Using a combination of heterogeneous electrochemistry, electrode and molecule design one may control both electron transfer (ET) and proton transfer (PT) of these nH⁺/ne^- reactions. Such control can allow functional modeling of hydrogenases (H⁺ + e^- → 1/2 H₂), cytochrome c oxidase (O₂ + 4 e^- + 4 H⁺ → 2 H₂O), monooxygenases (RR'CH₂ + O₂ + 2 e^- + 2 H⁺ → RR'CHOH + H₂O) and dioxygenases (S + O₂ → SO₂; S = organic substrate) in aqueous medium and at room temperatures. In addition, these heterogeneous constructs allow probing unnatural bioinspired reactions and estimation of the inner- and outer-sphere reorganization energy of small molecules and proteins.

Vanadium(VIV)-Porphyrin-Based Metal-Organic Frameworks for Synergistic Bimetallic Activation of Inert C(sp3)-H Bonds

Activation and selective functionalization of inert C(sp³)-H bonds remain one of the most challenging tasks in current synthetic chemistry. Herein, by decorating vanadium(V^IV)-porphyrin into metal-organic frameworks (MOFs) to stabilize the active tertbutyl peroxide radical, we reported a new approach to accomplish inert C(sp³)-H bond activation by a synergistic bimetallic strategy via a hydrogen atom transfer process under mild conditions. The stabilized peroxide radical by V^IV-porphyrin-based MOFs abstracted a hydrogen atom from the inert C(sp³)-H bonds for direct oxidization transformation utilizing environmentally friendly oxygen. Taking advantage of the high stability of Zr₆ clusters, the new Zr-MOF was recyclable six times without a conversion efficiency decrease. From this foundation, {Mn₃(μ₃-O)} cluster nodes with potential unsaturated coordinated sites were introduced into MOFs to replace Zr₆ clusters, realizing the pre-activation of substrates through the interaction between Mn nodes and substrates. The synergistic bimetallic activation effect of V^IV-porphyrin and Mn nodes dramatically promoted the conversion efficiency and product selectivity for inert C(sp³)-H bond functionalization.

Rejigging Electron and Proton Transfer to Transition between Dioxygenase, Monooxygenase, Peroxygenase, and Oxygen Reduction Activity: Insights from Bioinspired Constructs of Heme Enzymes

Nature has employed heme proteins to execute a diverse set of vital life processes. Years of research have been devoted to understanding the factors which bias these heme enzymes, with all having a heme cofactor, toward distinct catalytic activity. Among them, axial ligation, distal super structure, and substrate binding pockets are few very vividly recognized ones. Detailed mechanistic investigation of these heme enzymes suggested that several of these enzymes, while functionally divergent, use similar intermediates. Furthermore, the formation and decay of these intermediates depend on proton and electron transfer processes in the enzyme active site. Over the past decade, work in this group, using in situ surface enhanced resonance Raman spectroscopy of synthetic and biosynthetic analogues of heme enzymes, a general idea of how proton and electron transfer rates relate to the lifetime of different O2 derived intermediates has been developed. These findings suggest that the enzymatic activities of all these heme enzymes can be integrated into one general cycle which can be branched out to different catalytic pathways by regulating the lifetime and population of each of these intermediates. This regulation can further be achieved by tuning the electron and proton transfer steps. By strategically populating one of these intermediates during oxygen reduction, one can navigate through different catalytic processes to a desired direction by altering proton and electron transfer steps.

H2 and carbon-heteroatom bond activation mediated by polarized heterobimetallic complexes

The field of heterobimetallic chemistry has rapidly expanded over the last decade. In addition to their interesting structural features, heterobimetallic structures have been found to facilitate a range of stoichiometric bond activations and catalytic processes. The accompanying review summarizes advances in this area since January of 2010. The review encompasses well-characterized heterobimetallic complexes, with a particular focus on mechanistic details surrounding their reactivity applications.

Efficient oxidation of cumene to cumene hydroperoxide with ambient O2 catalyzed by metalloporphyrins

A novel and efficient protocol for oxidation of cumene to cumene hydroperoxide was presented using ambient O2 catalyzed by very simple metalloporphyrins. The selectivity toward cumene hydroperoxide reached 98.3% in the cumene conversion of 28.1% with T(4-COOH)PPCu as a catalyst at 80[Formula: see text]C. The origin of the higher performance of T(4-COOH)PPCu was mainly ascribed to the low catalytic performance of copper(II) in the cumene hydroperoxide decomposition, and the ability of T(4-COOH)PP in stabilizing cumene hydroperoxide through hydrogen-bond interactions between them. Compared with current industrial processes and academic research in oxidation of cumene to cumene hydroperoxide with O2, the main superiorities of this protocol were the high selectivity, high conversion, simple catalysts, solvent-free, additive-free and mild conditions which made this work an appealing reference for the industrial oxidation of cumene to cumene hydroperoxide, as well as the oxidative functionalization of other C-H bonds in various hydrocarbons.

Modulating alkene reactivity from oxygenation to halogenation via electrochemical O2 activation by Mn porphyrin

Oxidation of organic substrates is achieved in nature under mild conditions thanks to metalloenzymes but remains a challenge for chemists. Herein we show by UV-Vis spectroelectrochemistry that when MnIIITPPCl is electrochemically reduced to MnII in CH2Cl2 under O2, a MnIIO2˙ species is generated. Benzoic anhydride reacts with the latter triggering a catalytic current in cyclic voltammetry. Electrolysis on the catalytic wave in the presence of cyclooctene leads to its oxygenation or halogenation depending on the axial ligand present as reported here for the first time.

Kinetic Isotope Effects on Electron Transfer Across Self-Assembled Monolayers on Gold

Reactions requiring controlled delivery of protons and electrons are important in storage of energy in small molecules. While control over proton transfer can be achieved by installing appropriate chemical functionality in the catalyst, control of electron-transfer (ET) rates can be achieved by utilizing self-assembled monolayers (SAMs) on electrodes. Thus, a deeper understanding of the ET through SAM to an immobilized or covalently attached redox-active species is desirable. Long-range ET across several SAM-covered Au electrodes to covalently attached ferrocene is investigated using protonated and deuterated thiols (R-SH/R-SD). The rate of tunneling is measured using both chronoamperometry and cyclic voltammetry, and it shows a prominent kinetic isotope effect (KIE). The KIE is ∼2 (normal) for medium-chain-length thiols but ∼0.47 (inverse) for long-chain thiols. These results imply substantial contribution from the classical modes at the Au-(H)SR interface, which shifts substantially upon deuteration of the thiols, to the ET process. The underlying H/D KIE of these exchangeable thiol protons should be considered when analyzing solvent isotope effects in catalysis utilizing SAM.

A heterogeneous bio-inspired peroxide shunt for catalytic oxidation of organic molecules

Heme enzymes are capable of catalytically oxidising organic substrates using peroxide via the formation of a high-valent intermediate. Iron porphyrins with three different axial ligands are created on self-assembled monolayer-modified gold electrodes, which can oxidize C-H bonds and epoxidize alkenes efficiently. The kinetic isotope effects suggest that the hydrogen atom transfer reaction by a highly reactive oxidant is likely to be the rate-determining step. Effect of different axial ligands and different secondary structures of the iron porphyrin confirms that the thiolate axial ligand with a hydrophobic distal pocket is the most efficient for this oxidation chemistry.

Oxoiron(v) mediated selective electrochemical oxygenation of unactivated C-H and C[double bond, length as m-dash]C bonds using water as the oxygen source

An efficient electrochemical method for the selective oxidation of C–H bonds of unactivated alkanes (BDE ≤97 kcal mol⁻¹) and CC bonds of alkenes using a biomimetic iron complex, [(bTAML)Fe^III-OH₂]⁻, as the redox mediator in an undivided electrochemical cell with inexpensive carbon and nickel electrodes is reported. The O-atom of water remains the source of O-incorporation in the product formed after oxidation. The products formed upon oxidation of C–H bonds display very high regioselectivity (75 : 1, 3° : 2° for adamantane) and stereo-retention (RC ∼99% for cyclohexane derivatives). The substrate scope includes natural products such as cedryl acetate and ambroxide. For alkenes, epoxides were obtained as the sole product. Mechanistic studies show the involvement of a high-valent oxoiron(v) species, [(bTAML)Fe^V(O)]⁻ formed via PCET (overall 2H⁺/2e⁻) from [(bTAML)Fe^III-OH₂]⁻ in CPE at 0.80 V (vs. Ag/AgNO₃). Moreover, electrokinetic studies for the oxidation of C–H bonds indicate a second-order reaction with the C–H abstraction by oxoiron(v) being the rate-determining step.

A biomimetic iron complex-mediated selective and efficient electrochemical oxygenation of unactivated C–H bonds and CC bonds using water as an O-atom source.

Photocatalytic redox reactions with metalloporphyrins

Metalloporphyrinoids are utilized as efficient sensitizers and catalysts in photosynthesis and the reverse reaction that is respiration. Because metalloporphyrinoids show strong absorption in the visible region and redox active, metalloporphyrinoids are also suited as photoredox catalysts for photo-driven redox reactions using solar energy. In particular, metalloporphyrins are utilized as pivotal components to mimic the structure and function of the photosynthetic reaction center. Metalloporphyrins are used as photoredox catalysts for hydrogen evolution from electron and proton sources combining hydrogen evolution catalysts. Metalloporphyrins also act as thermal redox catalysts for photocatalytic reduction of CO2 with photoredox catalysts. Metalloporphyrins are also used as dual catalysts for a photoredox catalyst for oxygenation of substrates with H2O and a redox catalyst for O2 reduction when dioxygen is used as a two-electron oxidant and H2O as an oxygen source, both of which are the greenest reactants. Free base porphyrins can also be employed as promising photoredox catalysts for C–C bond formation reactions.

Electrochemical C-H oxygenation and alcohol dehydrogenation involving Fe-oxo species using water as the oxygen source

High-valent iron-oxo complexes are key intermediates in C-H functionalization reactions. Herein, we report the generation of a (TAML)Fe-oxo species (TAML = tetraamido macrocyclic ligand) via electrochemical proton-coupled oxidation of the corresponding (TAML)FeIII-OH2 complex. Cyclic voltammetry (CV) and spectroelectrochemical studies are used to elucidate the relevant (TAML)Fe redox processes and determine the predominant (TAML)Fe species present in solution during bulk electrolysis. Evidence for iron(iv) and iron(v) species is presented, and these species are used in the electrochemical oxygenation of benzylic C-H bonds and dehydrogenation of alcohols to ketones.