100th Anniversary of Macromolecular Science Viewpoint: Block Copolymer Particles: Tuning Shape, Interfaces, and Morphology

Crystallization-dictated assembly of block copolymers and nanoparticles under three-dimensional confinement

Crystallization-dictated self-assembly of crystalline block copolymers (BCPs) in solution has been utilized to produce many impressive nanostructures. However, when the assembly of crystalline BCPs happens in a three-dimensional (3D) confined space, predicting the self-assembly structure of BCPs becomes challenging due to the competition between crystallization and microphase separation. In this feature article, we summarize the recent progress in the self-assembly of crystalline BCPs under confinement, emphasizing the impact of crystallization behavior on the assembly structure. Furthermore, we highlight the crystallization-directed assembly of inorganic nanoparticles (NPs), either by pre-assembling crystalline polymers as templates or using crystalline polymer chain segments as ligands. By exploring the impact of crystallization behavior on the assembled structure of BCPs and NPs, it is helpful to predict and manipulate the properties of polymer/nanoparticle composites, thereby enabling the precise design of polymer metamaterials.

Host-Guest Interaction Mediated Interfacial Co-Assembly of Cyclodextrin and Bottlebrush Surfactants for Precisely Tunable Photonic Supraballs

Investigations of host-guest interactions at water-oil (w/o) interfaces are limited in single emulsion systems producing simple self-assembled objects with limited uses. Here, within hierarchically ordered water-in-oil-in-water (w/o/w) multiple emulsion droplets, interfacial self-assembly of (polynorbornene-graft-polystyrene)-block-(polynorbornene-graft-polyethylene glycol) (PNPS-b-PNPEG) bottlebrush block copolymers can be precisely controlled through host-guest interactions. α-Cyclodextrin (α-CD) in the aqueous phase can thread onto PEG side chains of the bottlebrush surfactants adsorbed at the w/o interface, leading to dehydration and collapsed chain conformation of the PEG block. Consequently, spherical curvature of the w/o internal droplets increases with the increased asymmetry of the bottlebrush molecules, producing photonic supraballs with precisely tailored structural parameters as well as photonic bandgaps. This work provides a simple but highly effective strategy for precise manipulation of complex emulsion systems applicable in a variety of applications, such as photonic pigments, cosmetic products, pesticides, artificial cells, etc.

Icosahedral supracrystal assembly from polymer-grafted nanoparticles via interplay of interfacial energy and confinement effect

Self-assembly of nanoparticles (NPs) in drying emulsion droplets paves the way for intricate three-dimensional (3D) superstructures, given the myriad of control parameters for fine-tuning assembly conditions. With their substantial energetic dynamics that are acutely responsive to emulsion confinements, polymeric ligands incorporated into a system can enrich its structural diversity. Here, we demonstrate the assembly of soft polymer-grafted NPs into Mackay icosahedrons beyond spherical body-centered cubic (BCC) packing structures commonly observed for these soft spheres. This behavior is governed by the free energy minimization within emulsions through the interplay of the oil-water interfacial energy and confinement effect as demonstrated by the experimental observations of structural transitions between icosahedrons and BCC crystals and by corresponding free energy calculations. The anisotropic surface of the icosahedral supracrystals provides the capability of guiding the position of a secondary constituent, creating unique hybrid patchy icosahedrons with the potential to develop into multifunctional 3D clusters that combine the benefits of both polymers and conventional colloids.

Dynamic Electrostatic Interfacial Engineering for Block Copolymer Microparticles with Reversible Structures

Responsive nanoparticle surfactants (NPSs) can dynamically and reversibly modulate the interfacial interactions between incompatible components, which are essential in the interfacial catalysis, corrosion, and self-assembly of block copolymers (BCPs). However, NPSs with stimuli-responsive behavior often involve tedious chemical synthesis and surface modifications. Herein, we propose a strategy to in situ construct a kind of dynamic and reversible NPSs by the interfacial electrostatic interaction between the negatively charged nanoparticles (NPs) and the positively charged homopolymers. The NPSs assembled at the oil/water interface reduce the interfacial tension and direct the confined assembly of BCP. Meanwhile, the dynamic NPSs can be disassembled by increasing the pH value or introducing competitive electrostatic attractions, which can dynamically and reversibly change the interfacial properties as well as the alignment of polymer chains, enabling BCP microparticles with reversibly switchable lamellar and cylindrical structures. Furthermore, by the introduction of aggregation-induced emission luminogens as tails to the NPSs, the reversible transformation of BCP microparticles can be visualized by fluorescence emission, which is dependent on the nanostructures of microparticles. This work establishes a concept for dynamically manipulating interfacial interactions and reversibly switching BCP microparticles without time-consuming NPS synthesis, showing promising applications in the fabrication of smart materials with switchable structures and properties.

Degradable Block Copolymer Nanoparticles Synthesized by Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) combines polymerization and in situ self-assembly of block copolymers in one system and has become a widely used method to prepare block copolymer nanoparticles at high concentrations. The persistence of polymers in the environment poses a huge threat to the ecosystem and represents a significant waste of resources. There is an urgent need to develop novel chemical approaches to synthesize degradable polymers. To meet with this demand, it is crucial to install degradability into PISA nanoparticles. Most recently, degradable PISA nanoparticles have been synthesized by introducing degradation mechanisms into either shell-forming or core-forming blocks. This Minireview summarizes the development in degradable block copolymer nanoparticles synthesized by PISA, including shell-degradable, core-degradable, and all-degradable nanoparticles. Future development will benefit from expansion of polymerization techniques with new degradation mechanisms and adaptation of high-throughput approaches for both PISA syntheses and degradation studies.

Dynamic Photonic Janus Colloids with Axially Stacked Structural Layers

Diblock copolymer (dBCP) particles capable of dynamic shape and color changes have gained significant attention due to their versatility in programmable shapes and intricate nanostructures. However, their application in photonic systems remains limited due to challenges in achieving a sufficient number of defect-free photonic layers over a tens-of-micrometer scale. In this study, we present a pioneering demonstration of photonic dBCP particles featuring over 300 axially stacked photonic layers with responsive color- and shape-transforming capabilities. Our approach leverages the complex interplay between the macrophase separation of multiple incompatible components and the microphase separation of dBCP from solvent-evaporative microemulsions. Specifically, continuous phase separation of silicone oil from polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP), triggered by solvent evaporation, promotes the anisotropic growth of PS-b-P2VP layers. This results in the formation of Janus colloids, where an oil droplet merges with a nanostructured polymer cone and lamellar structures align along the long axis of the cone. We highlight the capability to precisely adjust the particle morphology and the corresponding orientation, dispersion, and structural color window by modulating both the molecular weight of PS-b-P2VP and the volume ratio between PS-b-P2VP and silicone oil. Furthermore, reversible swelling/deswelling of photonic colloids is visualized and correlated with their structural colors. Finally, we demonstrate the potential of this study by presenting a multicolor-patterned array of photonic colloids, highlighting the possibilities for applications in smart photonic ink and devices.

Impact of channel nanostructures of porous carbon particles on their catalytic performance

Mesoporous carbon particles have great potential due to their unique structural properties as support materials for catalytic applications. Particle shapes and channel nanostructures of mesoporous carbon particles can determine the reactant/product transport efficiency. However, the role of the channel nanostructure in the catalytic reaction has not been much explored. Herein, we introduce a facile method to fabricate a series of porous carbon particles (PCPs) with controlled channel exposure on the carbon surface and investigate the impact of the channel nanostructure of the PCPs on the catalytic activity. By employing a membrane emulsification method with a controlled solvent evaporation rate, we fabricate block copolymer (BCP) particles with uniform size and regulated degrees of cylindrical channel exposed to the particle surface. Followed by the carbonization of the BCP particles, a low amount (1.3 wt%) of Pt is incorporated into the PCP series to investigate the impact of channel nanostructures on the catalytic oxidation reaction of o-phenylenediamine (OPD). Specifically, PCP featuring highly open channel nanostructures shows a high reaction rate constant of 0.154 mM-1 s-1 for OPD oxidation, showing 5.5 times higher catalytic activity than those of closed channel nanostructures (0.028 mM-1 s-1). This study provides a deeper understanding of the impact of channel nanostructure within mesoporous carbon particles on catalytic activity.

Self-Assembled Construction of Ion-Selective Nanobarriers in Electrolyte Membranes for Redox Flow Batteries

Ion-conducting membranes (ICMs) with high selectivity are important components in redox flow batteries. However it is still a challenge to break the trade-off between ion conductivity and ion selectivity, which can be resolved by the regulation of their nanostructures. Here, polyoxometalate (POM)-hybridized block copolymers (BCPs) are used as self-assembled additives to construct proton-selective nanobarriers in the ICM matrix to improve the microscopic structures and macroscopic properties of ICMs. Benefiting from the co-assembly behavior of BCPs and POMs and their cooperative noncovalent interactions with the polymer matrix, ∼50 nm ellipsoidal functional nanoassemblies with hydrophobic vanadium-shielding cores and hydrophilic proton-conducting shells are constructed in the sulfonated poly(ether ether ketone) matrix, which leads to an overall enhancement of proton conductivity, proton selectivity, and cell performance. These results present a self-assembly route to construct functional nanostructures for the modification of polymer electrolyte membranes toward emerging energy technologies.

Janus nanoplates, -bowls, and -cups: controlling size and curvature via terpolymer/homopolymer blending in 3D confinement

The synthesis and properties of Janus nanoparticles with spherical, cylindrical, and disk-like shapes are nowadays rather well understood. Other topologies such as nanorings and bowl-shaped Janus nanoparticles are believed to show distinctly different solution behavior and interaction with interfaces, but limitations in their synthesis currently prevents a proper investigation of these properties. Especially the combination of shape- and surface-anisotropy of bowl-shaped Janus nanoparticles could result in enhanced selectivity in uptake of cargo and enhanced directional diffusion. We here produce bowl-shaped Janus nanoparticles without noticeable side products through evaporation-induced confinement assembly (EICA) of triblock terpolymers blended with high molecular weight homopolymer. The triblock terpolymer phase separates from the homopolymer into spherical domes, where the terpolymer adopts a hemispherical lamella-lamella morphology (ll). Selective cross-linking, removal of the homopolymer, and disassembly of the microparticles releases the bowl-shaped Janus nanoparticles. The amount of blended homopolymer determines the size of the spherical dome, allowing to control particle curvature into flat Janus nanoplates, hemispherical Janus nanobowls, and deep Janus nanocups. The use of Shirasu Porous Glass (SPG) membranes with pore sizes in the range of dpore = 0.2-2.0 μm further provides control of particle diameter. Size and shape were analyzed with electron microscopy and the Janus character through selective surface decoration. The diffusion behavior of bowl-shaped Janus nanoparticles was investigated depending on particle curvature and anisotropy using angle-dependent dynamic light scattering.

Structure-Controlled Carbon Hosts for Dendrite-Free Aqueous Zinc Batteries

The surging demand for environmental-friendly and safe electrochemical energy storage systems has driven the development of aqueous zinc (Zn)-ion batteries (ZIBs). However, metallic Zn anodes suffer from severe dendrite growth and large volume change, resulting in a limited lifetime for aqueous ZIB applications. Here, it is shown that 3D mesoporous carbon (MC) with controlled carbon and defect configurations can function as a highly reversible and dendrite-free Zn host, enabling the stable operation of aqueous ZIBs. The MC host has a structure-controlled architecture that contains optimal sp2 -carbon and defect sites, which results in an improved initial nucleation energy barrier and promotes uniform Zn deposition. As a consequence, the MC host shows outstanding Zn plating/stripping performance over 1000 cycles at 2 mA cm-2 and over 250 cycles at 6 mA cm-2 in asymmetric cells. Density functional theory calculations further reveal the role of the defective sp2 -carbon surface in Zn adsorption energy. Moreover, a full cell based on Zn@MC900 anode and V2 O5 cathode exhibits remarkable rate performance and cycling stability over 3500 cycles. These results establish a structure-mechanism-performance relationship of the carbon host as a highly reversible Zn anode for the reliable operation of ZIBs.

The Process-Directed Self-Assembly of Block Copolymer Particles

The kinetic paths of structural evolution and formation of block copolymer (BCP) particles are explored using dynamic self-consistent field theory (DSCFT). It is shown that the process-directed self-assembly of BCP immersed in a poor solvent leads to the formation of striped ellipsoids, onion-like particles and double-spiral lamellar particles. The theory predicts a reversible path of shape transition between onion-like particles and striped ellipsoidal ones by regulating the temperature (related to the Flory-Huggins parameter between the two components of BCP, χAB ) and the selectivity of solvent toward one of the two BCP components. Furthermore, a kinetic path of shape transition from onion-like particles to double-spiral lamellar particles, and then back to onion-like particles is demonstrated. By investigating the inner-structural evolution of a BCP particle, it is identified that changing the intermediate bi-continuous structure into a layered one is crucial for the formation of striped ellipsoidal particles. Another interesting finding is that the formation of onion-like particles is characterized by a two-stage microphase separation. The first is induced by the solvent preference, and the second is controlled by the thermodynamics. The findings lead to an effective way of tailoring nanostructure of BCP particles for various industrial applications.

Kinetically Controlled Star Copolymer Self-Assembly for Rapid Fabrication of Nanoparticles with High Encapsulation Capacity

Rapid and scalable self-assembly of an amphiphilic 21-arm star copolymer, (polystyrene-block-polyethylene glycol)21 [(PS-b-PEG)21 ] in aqueous solution has been performed by reverse solvent exchange procedure. Transmission electron microscope (TEM) and nanoparticle tracking analysis (NTA) reveal the formation of nanoparticles with narrow size distribution. Further investigation indicates a kinetically controlled self-assembly mechanism of the copolymers, in which the star topology of the amphiphilic copolymer and deep quenching condition by reverse solvent exchange are key to accelerate intrachain contraction of the copolymer during phase separation. When interchain contraction dominant over interchain association, nanoparticles with low aggregation number could be formed. Thanks to the high hydrophobic contents of the (PS-b-PEG)21 polymers, the resulted nanoparticles could encapsulate a high capacity of hydrophobic cargo up to 19.84 %. The kinetically controlled star copolymer self-assembly process reported here provides a platform for the rapid and scalable fabrication of nanoparticle with high drug loading capacity (LC), which may find broad range of applications in, for example drug delivery, nanopesticide.

Sub-micron microparticles with tunable fluorescence emission obtained via co-self-assembly of amidoximed polymeric ligands and lanthanide ions

Lanthanide coordinating polymeric microparticles have witnessed increasing research interests during the past decades due to their versatile morphology and tunable fluorescent properties. Herein, we have synthesized an amidoximed block copolymer containing aromatic backbone and pendent amidoxime as well as carboxyl groups, which has been employed as the ligand to sensitize the intrinsic fluorescence emission of lanthanide ions of Tb³⁺ and Eu³⁺. Furthermore, the lanthanide coordinating polymeric microparticles showing tunable green and red emission fluorescence have been prepared via the emulsion confinement co-self-assembly of amidoximed polymeric ligands with Tb³⁺ and Eu³⁺. It is found that both the fluorescence emission and sizes of obtained fluorescent microparticles can be easily modulated in a wide range by tuning concentration of polymers and lanthanide ions, as well as emulsion evaporation temperature. Thanks to their tunable sizes (250-900 nm), fluorescence emission as well as presence of surface active functional groups, the present fluorescent microparticles would find potential applications in in-vitro detection, optical encoding and devices.

Light-adjusted supramolecular host-guest interfacial recognition for reconfiguring soft colloidal aggregates

The soft interfacial template-assisted confined self-assembly of block copolymers (BCPs) guiding colloidal aggregates has been extensively investigated by interfacial instability. Whether the macromolecular polymer architectonics possessed stimulus-responsive self-regulated structural controllability more readily implement the morphological diversity of colloidal aggregates. Herein, we in-situ constructed the alginate-modified β-cyclodextrin/azobenzene-functionalized alkyl chains (Alg-β-CD/AzoC12) system by supramolecular host-guest interfacial recognition-engineered strategy, in which possessed photo-stimulated responsive structural reconfigurability by modulating assembly/disassembly behaviors between CD and Azo at oil/water interface. The host-guest droplet interfaces acted as soft templates managing interfacial instability by synergistically integrating supra-amphiphilic host-guest polymers with cosurfactants, further constructing various soft supracolloidal aggregates, including soft nanoaggregates, microspheres with tunable degrees of surface roughness. Additionally, the stimuli-altering structural reconfigurability of supramolecular host-guest polymers was regulated by ultraviolet/visible irradiation, endowing soft aggregates with structural diversity. It's highly anticipated that the supramolecular host-guest interfacial recognition self-assembly establishes great bridge between supramolecular host-guest chemistry and colloid interface science.

Robust Full-Spectral Color Tuning of Photonic Colloids

Creation of color through photonic morphologies manufactured by molecular self-assembly is a promising approach, but the complexity and lack of robustness of the fabrication processes have limited their technical exploitation. Here, it is shown that photonic spheres with full-color tuning across the entire visible spectrum can be readily and reliably achieved by the emulsification of solutions containing a block copolymer (BCP) and two swelling additives. Solvent diffusion out of the emulsion droplets gives rise to 20-150 µm-sized spheres with an onion-like lamellar morphology. Controlling the lamellar thickness by differential swelling with the two additives enables color tuning of the Bragg interference-based reflection band across the entire visible spectrum. By studying five different systems, a set of important principles for manufacturing photonic colloids is established. Two swelling additives are required, one of which must exhibit strong interactions with one of the BCP blocks. The additives should be chosen to enhance the dielectric contrast, and the formation kinetics of the spheres must be sufficiently slow to enable the emergence of the photonic morphology. The proposed approach is versatile and robust and allows the scalable production of photonic pigments with possible future applications in inks for cosmetics and arts, coatings, and displays.

Confined Self-Assembly of Block Copolymers within Emulsion Droplets: A Perspective

When the self-assembly of block copolymers (BCPs) occurs within organic emulsion droplets in the aqueous phase, the strong structural frustration of BCP chains causes the formation of a series of well-regulated BCP particles that cannot be obtained from the self-assembly of BCPs in the bulk state or solution. In this Perspective, we review the recent progress of the self-assembly of BCPs confined in emulsion droplets. The governing factors of the structure and morphology of the as-prepared BCP particles are summarized. In addition, the applications of the as-prepared BCP particles in photonic crystals and drug release are discussed. Finally, we also give a forward-looking perspective on future challenges in this field.

A Versatile 3D-Confined Self-Assembly Strategy for Anisotropic and Ordered Mesoporous Carbon Microparticles

Mesoporous carbon microparticles (MCMPs) with anisotropic shapes and ordered structures are attractive materials that remain challenging to access. In this study, a facile yet versatile route is developed to prepare anisotropic MCMPs by combining neutral interface-guided 3D confined self-assembly (3D-CSA) of block copolymer (BCP) with a self-templated direct carbonization strategy. This route enables pre-engineering BCP into microparticles with oblate shape and hexagonal packing cylindrical mesostructures, followed by selective crosslinking and decorating of their continuous phase with functional species (such as platinum nanoparticles, Pt NPs) via in situ growth. To realize uniform in situ growth, a "guest exchange" strategy is proposed to make room for functional species and a pre-crosslinking strategy is developed to preserve the structural stability of preformed BCP microparticles during infiltration. Finally, Pt NP-loaded MCMPs are derived from the continuous phase of BCP microparticles through selective self-templated direct carbonization without using any external carbon source. This study introduces an effective concept to obtain functional species-loaded and N-doped MCMPs with oblate shape and almost hexagonal structure (p6mm), which would find important applications in fuel cells, separation, and heterogeneous catalysis.

Self-Assembly of Homo-Polyarylene Ether Into Reactive Matrix for Fabrication of Hybrid Functional Microparticles

Emulsion confinement self-assembly of block copolymer has witnessed increasing research interest in the recent decade, but the post-functionalization and application of the resultant polymeric micro/nano-particles are still in their infancy. In this work, a super-engineering polyarylene ether containing pendent nitrile and carboxyl (PAE-NC) has been synthesized and converted into polymeric microparticles for macromolecular enrichment via emulsion confinement self-assembly and subsequent surface modification. Moreover, the encapsulation capacity of PAE-NC was evaluated using hydrophobic fluorescent quantum dots (QD) as a functional probe. Particularly, we found that both the as-synthesized PAE-NC and its hydrolyzed derivatives could be converted into microparticles via emulsion confinement self-assembly. Furthermore, the co-self-assembly of red-emitting QD and PAE-NC enables the phase transfer of hydrophobic QD into hydrophilic luminescent microparticles with the persisted fluorescence emission. Based on these results, the current PAE-NC would be served as a versatile and robust matrix to fabricate advanced microparticles or microcapsules for various applications.

Ionic group-dependent structure of complex coacervate hydrogels formed by ABA triblock copolymers

This study investigates the nanostructure of complex coacervate core hydrogels (C3Gs) with varying compositions of cationic charged groups (i.e., ammonium and guanidinium) using small-angle X-ray/neutron scattering (SAX/NS). C3Gs were prepared by stoichiometric mixing of two oppositely charged ABA triblock copolymers in aqueous solvents, in which A end-blocks were functionalized with either sulfonate groups or a mixture of ammonium and guanidinium groups. Comprehensive small-angle X-ray/neutron scattering (SAX/NS) analysis elucidated the dependence of C3Gs structures on the fraction of guanidinium groups in the cationic end-block (x) and salt concentration (c_s). As x increases, the polymer volume fraction in the cores, and interfacial tension (γ_core) and salt resistance (c*) of the coacervate cores increase, which is attributed to the greater hydrophobicity and non-electrostatic association. Furthermore, we observed that the salt dependence of the interfacial tension follows γ_core ∼ (1 - c_s/c*)^3/2 in all series of x. The results show that the variation of the ionic group provides a powerful method to control the salt-responsiveness of C3Gs as stimuli-responsive materials.

Light-driven sequential shape transformation of block copolymer particles through three-dimensional confined self-assembly

Shape-controlled block copolymer (BCP) particles that respond to light stimulus have drawn great attention due to their promising applications in smart materials, yet polymeric particles with light-triggered controllable sequential shape transformation (SST) are still rarely reported. By confined co-assembly of polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) and azo-containing light-responsive additives within emulsions, herein, we fabricated BCP particles with light-controlled SST behavior. Attributed to the quaternization of P2VP chains with bromoalkyl additives and the trans-cis isomerization of an azo group under UV light, the interfacial interactions between the BCPs and the surrounding aqueous phase are significantly varied; therefore, the particles exhibit three distinct phases in sequence: (1) elongation of ellipsoidal particles with increasing domain spacing; (2) shape transformation of elongated ellipsoidal particles into accordion-like particles; and (3) disassembly of polymer particles into small spheres. In addition, these particles with SST behavior can be used in light-controlled drug release at a high spatial-temporal resolution, demonstrating their potential in clinical settings and biomedicine.

Uniform Nanorods with Regioselective Distribution of Inorganic Nanoparticles Templated by 2D Block Copolymer Nanosheets

The inorganic/organic hybrid materials with regioselective distribution of functional inorganic nanoparticles (NPs) have received constant interest attributed to fascinating integrated properties. However, there remains a formidable challenge in realizing the regioselective distribution of NPs for the specific hybrid nanorods. Herein, we report the construction of uniform core-shell hybrid nanorods with the regioselective distribution of inorganic NPs by selectively disassembling the prepared NPs/polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) hybrid nanosheets. Moreover, through precisely adjusting the parameters, such as complexation ability between the metal precursor and P4VP blocks, the protonation degree of P4VP blocks and complexation time, the NPs/polymer core-shell hybrid nanorod with the uniform distribution of NPs, and dumbbell-like hybrid nanorods with selective distribution of NPs at both ends can be obtained. This finding reveals a unique insight into the design of the anisotropic functional hybrid materials with the regioselective distribution of inorganic NPs.

Interfacial Self-Assembly of Amphiphilic Core-Shell Bottlebrush Block Copolymers Toward Responsive Photonic Balls Bearing Ionic Channels

Photonic balls can be facilely obtained through interfacial self-assembly of amphiphilic bottlebrush block polymers (BBCPs) within a water-in-oil-in-water (w/o/w) multiple emulsion system, and polystyrene (PS) has been employed as the skeleton of the balls showing no responsive properties. Here, we demonstrate the design and synthesis of core-shell BBCPs with a poly(tert-butyl acrylate)-block-polystyrene (PtBA-b-PS) block copolymer as the hydrophobic side chains and poly(ethylene glycol) (PEG) as the hydrophilic block. Interfacial self-assembly of the core-shell BBCPs within shrinking droplets produces porous microspheres with full-spectrum structural colors through an organized spontaneous emulsification (OSE) process. The PtBA core wrapped by PS in the skeleton of the balls can be converted into polyacrylic acid (PAA) forming an ionic channel responsive to pH variations. Consequently, the hydrolyzed photonic balls show different colors under different pH conditions dependent on varied degrees of ionization and hydration of the PAA channel. Reflected colors can be verified using an optical spectrometer, providing an effective strategy for precise pH indication. This article is protected by copyright. All rights reserved.

Shaping Block Copolymer Microparticles by Positively Charged Polymeric Nanoparticles

Shape-transforming block copolymer (BCP) microparticles have attracted extensive attention due to their promising applications in nanotechnology, biomedicines, interfacial science, and other fields. As their performance is highly associated to their shape and structure, it is highly important to realize the precise control of particle shape. In this report, we propose a method to regulate the shape and structure of polystyrene-b-polydimethoxysiloxane (PS-b-PDMS) microparticles by using positively charged core-crosslinked nanoparticles (CNPs) as a co-surfactant, combining with cationic surfactant cetyltrimethylammonium bromide (CTAB). The electrostatic repulsive interactions between CNPs and CTAB dominate the shape of PS-b-PDMS particles. Upon introducing NaCl, the electrostatic repulsion is reduced, resulting in the reshape of PS-b-PDMS particles from striped Janus ellipsoids to onion-like microspheres at a critical concentration of NaCl (c_NaCl ). Interestingly, we find that the critical c_NaCl first increased then reached a plateau, as the increase in the crosslinking degree of the CNPs. Our work provides a simple strategy to tailor the morphology of BCPs by manipulating the electrostatic interaction. This article is protected by copyright. All rights reserved.

Confinement-Assembly of Terpolymer-based Janus Nanoparticles

While the confinement assembly of block copolymers (BCPs) into functional microparticles has been extensively studied, little is known about the behavior of Janus nanoparticles (JNPs) in spherical confinement. Here, we investigate the confinement self-assembly of JNPs in drying emulsion droplets and compare their behavior to their ABC triblock terpolymer precursor. Emulsions of both materials were prepared using Shirasu Porous Glass (SPG) membranes leading to narrow size distributions of the microparticles with average hydrodynamic radii in the range of R_h = 250 - 500 nm (depending on the pore radius, R_pore ). The internal structure of the microparticles was verified with transmission electron microscopy (TEM) on ultrathin cross-sections and compared to the corresponding bulk morphologies. While the confinement-assembly of terpolymers resulted in microparticles with ordered inner morphologies, order for JNPs diminished when the Janus balance (JB) deviated from parity. This article is protected by copyright. All rights reserved.

A 3D Hierarchical Host with Enhanced Sodiophilicity Enabling Anode-Free Sodium-Metal Batteries

Sodium-metal batteries (SMBs) are considered as a compliment to lithium-metal batteries for next-generation high-energy batteries because of their low cost and the abundance of sodium (Na). Herein, a 3D nanostructured porous carbon particle containing carbon-shell-coated Fe nanoparticles (PC-CFe) is employed as a highly reversible Na-metal host. PC-CFe has a unique 3D hierarchy based on sub-micrometer-sized carbon particles, ordered open channels, and evenly distributed carbon-coated Fe nanoparticles (CFe) on the surface. PC-CFe achieves high reversibility of Na plating/stripping processes over 500 cycles with a Coulombic efficiency of 99.6% at 10 mA cm^-2 with 10 mAh cm^-2 in Na//Cu asymmetric cells, as well as over 14 400 cycles at 60 mA cm^-2 in Na//Na symmetric cells. Density functional theory calculations reveal that the superior cycling performance of PC-CFe stems from the stronger adsorption of Na on the surface of the CFe, providing initial nucleation sites more favorable to Na deposition. Moreover, the full cell with a PC-CFe host without Na metal and a high-loading Na₃ V₂ (PO₄ )₃ cathode (10 mg cm^-2 ) maintains a high capacity of 103 mAh g^-1 at 1 mA cm^-2 even after 100 cycles, demonstrating the operation of anode-free SMBs.

Synthesis of Block Copolymers by Mechanistic Transformation from Reversible Complexation Mediated Living Radical Polymerization to the Photoinduced Radical Oxidation/Addition/Deactivation Process

A versatile strategy for the fabrication of block copolymers by the combination of two discrete living polymerization techniques─reversible complexation mediated living radical polymerization (RCMP) and photoinduced radical oxidation addition deactivation (PROAD) processes─is reported. First, RCMP is conducted to yield poly(methyl methacrylate) with iodide end groups (PMMA-I). In the following step, PMMA-I is used as macroinitiator for living PROAD cationic polymerization of isobutyl vinyl ether. Successful formation of the block copolymers is confirmed by 1H NMR, FT-IR, GPC, and DSC investigations.

Solvent Annealing of Striped Ellipsoidal Block Copolymer Particles: Reversible Control over Lamellae Asymmetry, Aspect Ratio, and Particle Surface

Solvent annealing is a versatile tool to adjust the shape and morphology of block copolymer (BCP) particles. During this process, polar solvents are often used for block-selective swelling. However, such water-miscible solvents can induce (partial) solubilization of one block in the surrounding aqueous medium, thus, causing complex structural variations and even particle disassembly. To reduce the complexity in morphology control, we focused on toluene as a nonpolar polystyrene-selective solvent for the annealing of striped polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) ellipsoids. The selective stretching of PS chains produces unique asymmetric lamellae structures, which translate to an increase in the particle aspect ratio after toluene evaporation. Complete reversibility is achieved by changing to chloroform as a nonselective solvent. Moreover, surfactants can be used to tune block-selective wetting of the particle surface during the annealing; for example, a PS shell can protect the internal lamellae structure from disassembly. Overall, this versatile postassembly process enables the tailoring of the structural features of striped colloidal ellipsoids by only using commercial BCPs and solvents.

Lens-Shaped Carbon Particles with Perpendicularly-Oriented Channels for High-Performance Proton Exchange Membrane Fuel Cells

Two-dimensional sheet-like mesoporous carbon particles are promising for maximizing the number of active sites and the mass transport efficiency of proton exchange membrane fuel cells (PEMFCs). Herein, we develop a series of lens-shaped mesoporous carbon (LMC) particles with perpendicularly oriented channels (diameter = 60 nm) and aspect ratios (ARs) varying from 2.1 to 6.2 and apply them for the fabrication of highly efficient PEMFCs. The membrane emulsification affords uniform-sized, lens-shaped block copolymer particles, which are successfully converted into the LMC particles with well-ordered vertical channels through hyper-cross-linking and carbonization steps. Then, an ultralow amount (1 wt %) of platinum (Pt) is loaded into the particles. The LMC particles with higher ARs are packed with a higher density in the cathode and are better aligned on the cathode surface compared to the LMC particles with lower ARs. Thus, the well-ordered channels in the particles facilitate the mass transport of the reactants and products, significantly increasing the PEMFC performance. For example, the LMC particles with the AR of 6.2 show the highest initial single cell performance of 1135 mW cm^-2, and the cell exhibits high durability with 1039 mW cm^-2 even after 30 000 cycles. This cell performance surpasses that of commercial Pt/C catalysts, even at 1/20 of the Pt loading.

Transformer-Induced Metamorphosis of Polymeric Nanoparticle Shape at Room Temperature

Controlled polymerizations have enabled the production of nanostructured materials with different shapes, each exhibiting distinct properties. Despite the importance of shape, current morphological transformation strategies are limited in polymer scope, alter the chemical structure, require high temperatures, and are fairly tedious. Herein we present a rapid and versatile morphological transformation strategy that operates at room temperature and does not impair the chemical structure of the constituent polymers. By simply adding a molecular transformer to an aqueous dispersion of polymeric nanoparticles, a rapid evolution to the next higher-order morphology was observed, yielding a range of morphologies from a single starting material. Significantly, this approach can be applied to nanoparticles produced by disparate block copolymers obtained by various synthetic techniques including emulsion polymerization, polymerization-induced self-assembly and traditional solution self-assembly.

Structure Regulation of Block Copolymer Assemblies in Emulsion Droplets by Adding a Selective Solvent

Generally, nanostructured polymer particles are prepared by three-dimensional (3D) confined self-assembly (3D-CSA) of block copolymers (BCPs), while micelles are obtained through self-assembly of BCPs in dilute solutions. Herein, a facile yet robust strategy is developed to regulate the assembled structures of BCP, poly(styrene-block-4-vinylpyridine) (PS-b-P4VP), from nanostructured particles to micelles. The assemblies are prepared by an emulsion-solvent diffusion-induced self-assembly route, which is conducted by dialysis. A key feature of this strategy is that a P4VP-selective solvent (e.g., ethanol) is added to the dialysate to tune the interfacial behavior of the droplets and assembled structures of PS-b-P4VP. Our results reveal that in the presence of slight ethanol, the surface and internal structural transitions of nanostructured particles are caused by changes in the interfacial selectivity and packing parameter. Interestingly, interfacial instability, which results in the formation of micelles, is observed when the dialysate contains 50 vol.% ethanol or more. The reason can be ascribed to the decreased interface tension, which is induced by the increase in ethanol and enhanced solubility of P4VP. This facile strategy provides a new opportunity to bridge the gap between traditional 3D-CSA and solution self-assembly of BCPs, offering a promising route to engineer morphologies and nanostructures of polymeric assemblies. This article is protected by copyright. All rights reserved.

Poly(vinylpyridine)-Containing Block Copolymers for Smart, Multicompartment Particles

Multicompartment particles generated by the self-assembly of block copolymers (BCPs) have received considerable attention due to their unique morphologies and functionalities. A class of important building blocks for multicomponent particles...

Synthesis of block copolymers containing 3-chloro-2-hydroxypropyl methacrylate by NMP – a versatile platform for functionalization

This study highlights the potential of 3-chloro-2-hydroxypropyl methacrylate (ClHPMA) as a functional building block in nanostructured block copolymer architectures.