Molecular Recognition of Fluorescent Probe Molecules with a Pseudopolyrotaxane Nanosheet

Polyurethane-Type Poly[3]rotaxanes Synthesized from Cyclodextrin-Based [3]Rotaxane Diol and Diisocyanates

Synthesis of polyurethane-type poly[3]rotaxanes is achieved by polyaddition between a cyclodextrin (CD)-based [3]rotaxane diol and various diisocyanate species, which provide a more defined structure compared to conventional polyrotaxane syntheses. In this study, hydroxyl groups on CDs of [3]rotaxane diol are initially acetylated, and deprotected after the polyaddition to introduce polyurethane backbone structure into polyrotaxane framework. Despite a relatively complicated chemical structure, [3]rotaxane diol monomer is successfully synthesized in a high yield (overall 67%) without any taxing purification process, which is beneficial for practical applications. The polymerization itself proceeds well under a standard polyaddition reaction condition to afford corresponding polyurethanes around 80% yield with Mn > 30 kDa. The poly[3]rotaxanes show different aggregation behavior or optical properties, whether or not acetyl groups are present, and are analyzed by XRD, SEM, and fluorescence measurements.

Cucurbit[8]uril-Based Supramolecular Probe for the Detection of 3-Nitrotyrosine in Human Serum and Plasma

The biomarker 3-nitrotyrosine (3-NT) is widely recognized as an indicator of renal oxidative stress injury, making its detection crucial for the early identification of renal insufficiency. This study presents the design and synthesis of a tetraphenylstyrene imidazole derivative (TIPE-MI), which is utilized to create a supramolecular probe in conjunction with cucurbit[8]uril (Q[8]) through host-guest interactions. The resulting supramolecular self-assembly exhibits excellent optical properties and has been employed for the specific detection of 3-NT through fluorescence quenching. The introduction of 3-NT resulted in a decreased fluorescence intensity of the yellow fluorescent probe, which gradually transitioned from bright yellow to light yellow and then became colorless as the 3-NT concentration was increased. A portable detection platform was devised to augment the efficiency of detection. In order to facilitate biological applications, we have substantiated the probe's exceptional precision in detecting 3-NT in biological samples, encompassing human serum and plasma. The probe also exhibited negligible cytotoxicity. The accumulation of the probe in renal cells elicited a fluorescence signal, thereby indicating the prospective viability of this system for visual detection with renal cytocompatibility.

Aggregation Behavior of Cyclodextrin-Based [3]Rotaxanes

The aggregation of a cyclodextrin (CD)-based [3]rotaxane has been observed and analyzed in detail for the first time in this work. Although the hexagonal packing aggregation of CD-based polyrotaxane is a well known phenomenon, corresponding studies in terms of rotaxanes without any polymer structure have not been conducted so far, probably owing to the difficulty of the molecular design. We synthesized a series of [3]rotaxane species by using a urea-end-capping method and evaluated their aggregation behavior by XRD and SEM measurements. [3]Rotaxane species containing native CD rings showed clear signals assigned to the hexagonal packing by XRD measurement as did polyrotaxane; this proved their aggregation capability. Because the corresponding per-acetylated derivatives did not show this aggregation behavior, the driving force of this aggregation was suggested to be hydrogen bond formation among CD units. The effect of axle end structures and partial acetylation of CDs were also studied.

Large-area fluorescence enhancement of R6G based on a uniform PVA-Au plasmonic substrate

With the development of surface enhanced fluorescence (SEF) spectroscopy technology, uniform and low-cost SEF substrate is urgently needed. In this paper, the nanocomposite films of poly (vinyl alcohol) (PVA) embedded with in-situ Au particles, their localized surface plasmon resonance (LSPR) bands locate at different wavelengths from 525 nm to 569 nm, were used as substrates to enhance the fluorescence of rhodamine 6 G (R6G). The results shows that the uniform light emission in large area can be measured, and the maximum enhancement factor (EF) is about 13 folds. With increasing concentration of R6G films, the EF first increases and then slowly decreases. It is demonstrated that the EF greatly depends on the matching degree of the emission/excitation of R6G and the LSPR band of PVA-Au substrate. All the results further suggests that the PVA-Au substrate not only realize the fluorescence enhancement but also attenuates the fluorescence quenching at higher concentration. In addition, the local electric distribution of the substrate is simulated by using three-dimensional finite different time-domain (FDTD) to further demonstrate the mechanism of the SEF. This substrate has good development prospects in the fields of fluorescent probes and fluorescence imaging, which can be beneficial to the development of uniform and low-cost SEF substrate.

2-O-Methylated β-Cyclodextrin as an Effective Building Block to Construct Supramolecular Assemblies with Various Morphologies and Molecular Arrangements

The preparation of supramolecular cyclodextrin (CD) assemblies and control of their assembly mode through guest inclusion in CD cavities have been actively studied. Contrarily, there are limited reports on the control of the assembly mode of guest-free CD molecules by external stimuli. Herein, we report the use of 2-O-methylated β-cyclodextrin (2-Me-β-CD) as an effective building block in fabricating supramolecular assemblies with diverse morphologies and molecular arrangements through assembly mode control by various stimuli, such as temperature and solvent. When methanol and diethyl carbonate were used as good and poor solvents, respectively, 2-Me-β-CD formed an amorphous assembly through solvent evaporation on a polyethylene terephthalate (PET) substrate. Increasing the drying temperature and using crystalline substrates, such as highly oriented pyrolytic graphite (HOPG) and sapphire, changed the assembly mode of 2-Me-β-CD to a head-to-tail channel assembly. However, when a 2-Me-β-CD/1-propanol solution was mixed with linear alkanes as a poor solvent, 2-Me-β-CD with head-to-head channel assembly was formed as a precipitate. Additionally, when the corresponding cyclic alkane was used as an alternative poor solvent, an organogel composed of 2-Me-β-CD with head-to-head channel assemblies was obtained. The organogel obtained became a precipitate composed of 2-Me-β-CD with cage-type assembly upon heating at 50 °C. Among the supramolecular assemblies fabricated in this study, the head-to-tail channel assembly is a rare molecular assembly of β-CD and its derivatives. It possesses a modified columnar cavity that has potential applications in molecular recognition and sensing.

Thermally induced disassembly mechanism of pseudo-polyrotaxane nanosheets consisting of β-CD and a poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymer

PPRNSs dissolved in two steps during heating owing to the anisotropy of the topological constraint of β-CD by axis polymers.

Polymer Brush Formation Assisted by the Hierarchical Self-Assembly of Topological Supramolecules

The development of methods for the polymer brush layer formation on material surfaces to improve the surface properties has been researched for decades. Here, we report a novel approach for the formation of a polymer brush layer on materials and the alteration of the surface properties using a pseudo-polyrotaxane nanosheet (PPRNS). In the PPRNS, β-cyclodextrin (CD) selectively covered the central poly(propylene oxide)₂₉ segment of the carboxyl-terminated poly(ethylene oxide)₇₅-b-poly(propylene oxide)₂₉-b-poly(ethylene oxide)₇₅ (COOH-EO₇₅PO₂₉EO₇₅) triblock copolymer to form columnar crystals. The EO chains of COOH-EO₇₅PO₂₉EO₇₅ then adopt polymer brush conformations and exhibit an oil-repellent property on the material surfaces. Based on the flexibility derived from the nanosheet structure, the PPRNS showed high adhesion to the Blu-ray disk substrate (1D bending), polystyrene spherical beads (2D bending), and random rough surface of pork skin. The PPRNS is expected to become a new method for obtaining polymer brush layers and improving the surface properties irrespective of the material type.