Light-Enabled Reversible Shape Transformation of Block Copolymer Particles

Dynamic Electrostatic Interfacial Engineering for Block Copolymer Microparticles with Reversible Structures

Responsive nanoparticle surfactants (NPSs) can dynamically and reversibly modulate the interfacial interactions between incompatible components, which are essential in the interfacial catalysis, corrosion, and self-assembly of block copolymers (BCPs). However, NPSs with stimuli-responsive behavior often involve tedious chemical synthesis and surface modifications. Herein, we propose a strategy to in situ construct a kind of dynamic and reversible NPSs by the interfacial electrostatic interaction between the negatively charged nanoparticles (NPs) and the positively charged homopolymers. The NPSs assembled at the oil/water interface reduce the interfacial tension and direct the confined assembly of BCP. Meanwhile, the dynamic NPSs can be disassembled by increasing the pH value or introducing competitive electrostatic attractions, which can dynamically and reversibly change the interfacial properties as well as the alignment of polymer chains, enabling BCP microparticles with reversibly switchable lamellar and cylindrical structures. Furthermore, by the introduction of aggregation-induced emission luminogens as tails to the NPSs, the reversible transformation of BCP microparticles can be visualized by fluorescence emission, which is dependent on the nanostructures of microparticles. This work establishes a concept for dynamically manipulating interfacial interactions and reversibly switching BCP microparticles without time-consuming NPS synthesis, showing promising applications in the fabrication of smart materials with switchable structures and properties.

Controlling the Formation of Polyhedral Block Copolymer Nanoparticles: Insights from Process Variables and Dynamic Modeling

This study delves into the formation of nanoscale polyhedral block copolymer particles (PBCPs) exhibiting cubic, octahedral, and variant geometries. These structures represent a pioneering class that has never been fabricated previously. PBCP features distinct variations in curvature on the outer surface, aligning with the edges and corners of polyhedral shapes. This characteristic sharply contrasts with previous block copolymers (BCPs), which displayed a smooth spherical surface. The emergence of these cornered morphologies presents an intriguing and counterintuitive phenomenon and is linked to process parameters, such as evaporation rates and initial concentration, while keeping other variables constant. Using a system of coupled Cahn-Hillard (CCH) equations, we uncover the mechanisms driving polyhedral particle formation, emphasizing the importance of controlling relaxation parameters for shape variable u and microphase separation v. This unconventional approach, differing from traditional steepest descent method, allows for precise control and diverse polyhedral particle generation. Accelerating the shape variable u proves crucial for expediting precipitation and aligns with experimental observations. Employing the above theoretical model, we achieve shape predictions for particles and the microphase separation within them, which overcomes the limitations of ab initio computations. Additionally, a numerical stability analysis discerns the transient nature versus local minimizer characteristics. Overall, our findings contribute to understanding the complex interplay between process variables and the morphology of polyhedral BCP nanoparticles.

Light-Responsive Shape- and Color-Changing Block Copolymer Particles with Fast Switching Speed

Polymer particles capable of dynamic shape changes in response to light have received substantial attention in the development of intelligent multifunctional materials. In this study, we develop a light-responsive block copolymer (BCP) particle system that exhibits fast and reversible shape and color transitions. The key molecular design is the integration of spiropyran photoacid (SPPA) molecules into the BCP particle system, which enables fast and dynamic transformations of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) particles in response to light. The SPPA photoisomerization, induced by 420 nm light irradiation, lowers the pH of the aqueous surroundings from 5.5 to 3.3. The protonated P4VP block substantially increases in domain size from 14 to 39 nm, resulting in significant elongation of the BCP particles (i.e., an increase in the aspect ratio (AR) of the particles from 1.8 to 3.4). Moreover, SPPA adsorbed onto the P4VP surface induces significant changes in the luminescent properties of the BCP particles via photoisomerization of SPPA. Notably, the BCP particles undergo fast, dynamic shape and color transitions within a period of 10 min, maintaining high reversibility over multiple light exposures. Functional dyes are selectively incorporated into different domains of the light-responsive BCP particles to achieve different ranges of color responses. Thus, this study showcases a light-responsive hydrogel display capable of reversible and multicolor photopatterning.

Nanosheet Particles with Defect-Free Block Copolymer Structures Driven by Emulsions Containing Crystallizable Surfactants

Highly anisotropic-shaped particles with well-ordered internal nanostructures have received significant attention due to their unique shape-dependent photonic, rheological, and electronic properties and packing structures. In this work, nanosheet particles with cylindrical block copolymer (BCP) arrays are achieved by utilizing collapsed emulsions as a scaffold for BCP self-assembly. Highly elongated structures with large surface areas are formed by employing crystallizable surfactants that significantly reduce the interfacial tension of BCP emulsions. Subsequently, the stabilized elongated emulsion structures lead to the formation of BCP nanosheets. Specifically, when polystyrene-block-polydimethylsiloxane (PS-b-PDMS) and 1-octadecanol (C18-OH) are co-assembled within an emulsion, C18-OH penetrates the surfactant layer at the emulsion interface, lowering the interfacial tension (i.e., below 1 mN m-1 ) and causing emulsion deformation. In addition, C18-OH crystallization allows for kinetic arrest of the collapsed emulsion shape during solvent evaporation. Consequently, PS-b-PDMS BCPs self-assemble into defect-free structures within nanosheet particles, exhibiting an exceptionally high aspect ratio of over 50. The particle formation mechanism is further investigated by controlling the alkyl chain length of the fatty alcohol. Finally, the coating behavior of nanosheet particles is investigated, revealing that the deposition pattern on a substrate is strongly influenced by the particle's shape anisotropy, thus highlighting their potential for advanced coating applications.

Impact of channel nanostructures of porous carbon particles on their catalytic performance

Mesoporous carbon particles have great potential due to their unique structural properties as support materials for catalytic applications. Particle shapes and channel nanostructures of mesoporous carbon particles can determine the reactant/product transport efficiency. However, the role of the channel nanostructure in the catalytic reaction has not been much explored. Herein, we introduce a facile method to fabricate a series of porous carbon particles (PCPs) with controlled channel exposure on the carbon surface and investigate the impact of the channel nanostructure of the PCPs on the catalytic activity. By employing a membrane emulsification method with a controlled solvent evaporation rate, we fabricate block copolymer (BCP) particles with uniform size and regulated degrees of cylindrical channel exposed to the particle surface. Followed by the carbonization of the BCP particles, a low amount (1.3 wt%) of Pt is incorporated into the PCP series to investigate the impact of channel nanostructures on the catalytic oxidation reaction of o-phenylenediamine (OPD). Specifically, PCP featuring highly open channel nanostructures shows a high reaction rate constant of 0.154 mM-1 s-1 for OPD oxidation, showing 5.5 times higher catalytic activity than those of closed channel nanostructures (0.028 mM-1 s-1). This study provides a deeper understanding of the impact of channel nanostructure within mesoporous carbon particles on catalytic activity.

Morphological Evolution of Hybrid Block Copolymer Particles: Toward Magnetic Responsive Particles

The co-assembly of block copolymers (BCPs) and inorganic nanoparticles (NPs) under emulsion confinement allows facile access to hybrid polymeric colloids with controlled hierarchical structures. Here, the effect of inorganic NPs on the structure of the hybrid BCP particles and the local distribution of NPs are studied, with a particular focus on comparing Au and Fe3O4 NPs. To focus on the effect of the NP core, Au and Fe3O4 NPs stabilized with oleyl ligands were synthesized, having a comparable diameter and grafting density. The confined co-assembly of symmetric polystyrene-b-poly(1,4-butadiene) (PS-b-PB) BCPs and NPs in evaporative emulsions resulted in particles with various morphologies including striped ellipsoids, onion-like particles, and their intermediates. The major difference in PS-b-PB/Au and PS-b-PB/Fe3O4 particles was found in the distribution of NPs inside the particles that affected the overall particle morphology. Au NPs were selectively localized inside PB domains with random distributions regardless of the particle morphology. Above the critical volume fraction, however, Au NPs induced the morphological transition of onion-like particles into ellipsoids by acting as an NP surfactant. For PS-b-PB/Fe3O4 ellipsoids, Fe3O4 NPs clustered and segregated to the particle/surrounding interface of the ellipsoids even at a low volume fraction, while Fe3O4 NPs were selectively localized in the middle of PB domains in a string-like pattern for PS-b-PB/Fe3O4 onion-like particles.

The Process-Directed Self-Assembly of Block Copolymer Particles

The kinetic paths of structural evolution and formation of block copolymer (BCP) particles are explored using dynamic self-consistent field theory (DSCFT). It is shown that the process-directed self-assembly of BCP immersed in a poor solvent leads to the formation of striped ellipsoids, onion-like particles and double-spiral lamellar particles. The theory predicts a reversible path of shape transition between onion-like particles and striped ellipsoidal ones by regulating the temperature (related to the Flory-Huggins parameter between the two components of BCP, χAB ) and the selectivity of solvent toward one of the two BCP components. Furthermore, a kinetic path of shape transition from onion-like particles to double-spiral lamellar particles, and then back to onion-like particles is demonstrated. By investigating the inner-structural evolution of a BCP particle, it is identified that changing the intermediate bi-continuous structure into a layered one is crucial for the formation of striped ellipsoidal particles. Another interesting finding is that the formation of onion-like particles is characterized by a two-stage microphase separation. The first is induced by the solvent preference, and the second is controlled by the thermodynamics. The findings lead to an effective way of tailoring nanostructure of BCP particles for various industrial applications.

Benzethonium chloride as a tungsten corrosion inhibitor in neutral and alkaline media for the post-chemical mechanical planarization application

The cleaning solution for the post-chemical mechanical planarization (post-CMP) process of tungsten in neutral-alkaline media requires corrosion inhibitors as an additive, especially for advanced devices where the device node size shrinks below 10 nm. In the present study, the corrosion inhibition performance of benzethonium chloride (BTC) is evaluated in neutral-alkaline conditions. The electrochemical impedance spectroscopy (EIS) analysis showed ∼ 90 % of corrosion inhibition efficiency with an optimum concentration of 0.01 wt% BTC at both pH 7 and 11. Langmuir adsorption isotherm, frontier molecular orbital theory, molecular simulation, contact angle, precipitation study, and X-ray photoelectron spectroscopy analysis were performed to identify the inhibition mechanism of the BTC molecule on the W surface. Based on the proposed mechanism, the electrostatic attraction between the positively charged N atom in the BTC molecule and the negatively charged W surface initiates the adsorption of the molecule. The high dipole moment and large molecular size enhance the physical adsorption of the molecule to the surface. In addition to this, the adsorption isotherm analysis shows that possible chemical interaction with a moderate value of Gibbs free energy change of adsorption exists between the W and BTC molecule. The excellent corrosion inhibition efficiency of BTC on W is confirmed by the frontier molecular orbital theory and molecular dynamic simulation analysis.

Confined Self-Assembly of Block Copolymers within Emulsion Droplets: A Perspective

When the self-assembly of block copolymers (BCPs) occurs within organic emulsion droplets in the aqueous phase, the strong structural frustration of BCP chains causes the formation of a series of well-regulated BCP particles that cannot be obtained from the self-assembly of BCPs in the bulk state or solution. In this Perspective, we review the recent progress of the self-assembly of BCPs confined in emulsion droplets. The governing factors of the structure and morphology of the as-prepared BCP particles are summarized. In addition, the applications of the as-prepared BCP particles in photonic crystals and drug release are discussed. Finally, we also give a forward-looking perspective on future challenges in this field.

Self-Assembly of Homo-Polyarylene Ether Into Reactive Matrix for Fabrication of Hybrid Functional Microparticles

Emulsion confinement self-assembly of block copolymer has witnessed increasing research interest in the recent decade, but the post-functionalization and application of the resultant polymeric micro/nano-particles are still in their infancy. In this work, a super-engineering polyarylene ether containing pendent nitrile and carboxyl (PAE-NC) has been synthesized and converted into polymeric microparticles for macromolecular enrichment via emulsion confinement self-assembly and subsequent surface modification. Moreover, the encapsulation capacity of PAE-NC was evaluated using hydrophobic fluorescent quantum dots (QD) as a functional probe. Particularly, we found that both the as-synthesized PAE-NC and its hydrolyzed derivatives could be converted into microparticles via emulsion confinement self-assembly. Furthermore, the co-self-assembly of red-emitting QD and PAE-NC enables the phase transfer of hydrophobic QD into hydrophilic luminescent microparticles with the persisted fluorescence emission. Based on these results, the current PAE-NC would be served as a versatile and robust matrix to fabricate advanced microparticles or microcapsules for various applications.

Light-driven sequential shape transformation of block copolymer particles through three-dimensional confined self-assembly

Shape-controlled block copolymer (BCP) particles that respond to light stimulus have drawn great attention due to their promising applications in smart materials, yet polymeric particles with light-triggered controllable sequential shape transformation (SST) are still rarely reported. By confined co-assembly of polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) and azo-containing light-responsive additives within emulsions, herein, we fabricated BCP particles with light-controlled SST behavior. Attributed to the quaternization of P2VP chains with bromoalkyl additives and the trans-cis isomerization of an azo group under UV light, the interfacial interactions between the BCPs and the surrounding aqueous phase are significantly varied; therefore, the particles exhibit three distinct phases in sequence: (1) elongation of ellipsoidal particles with increasing domain spacing; (2) shape transformation of elongated ellipsoidal particles into accordion-like particles; and (3) disassembly of polymer particles into small spheres. In addition, these particles with SST behavior can be used in light-controlled drug release at a high spatial-temporal resolution, demonstrating their potential in clinical settings and biomedicine.

Shaping Block Copolymer Microparticles by Positively Charged Polymeric Nanoparticles

Shape-transforming block copolymer (BCP) microparticles have attracted extensive attention due to their promising applications in nanotechnology, biomedicines, interfacial science, and other fields. As their performance is highly associated to their shape and structure, it is highly important to realize the precise control of particle shape. In this report, we propose a method to regulate the shape and structure of polystyrene-b-polydimethoxysiloxane (PS-b-PDMS) microparticles by using positively charged core-crosslinked nanoparticles (CNPs) as a co-surfactant, combining with cationic surfactant cetyltrimethylammonium bromide (CTAB). The electrostatic repulsive interactions between CNPs and CTAB dominate the shape of PS-b-PDMS particles. Upon introducing NaCl, the electrostatic repulsion is reduced, resulting in the reshape of PS-b-PDMS particles from striped Janus ellipsoids to onion-like microspheres at a critical concentration of NaCl (c_NaCl ). Interestingly, we find that the critical c_NaCl first increased then reached a plateau, as the increase in the crosslinking degree of the CNPs. Our work provides a simple strategy to tailor the morphology of BCPs by manipulating the electrostatic interaction. This article is protected by copyright. All rights reserved.

Transformation of Amorphous Nanobowls to Crystalline Ellipsoids Induced by Trans-Cis Isomerization of Azobenzene

The stimuli-responsive transition of nanostructures from amorphous to crystalline state is of high interest in polymer science, but is still challenging. Herein, we demonstrate the transformation of amorphous nanobowls to crystalline ellipsoids triggered by UV induced trans-cis isomerization, using an azobenzene-containing amphiphilic homopolymer (PAzoAA) as building block. The amide bond and azobenzene pendants are introduced to the side chain of PAzoAA to afford hydrogen bonding and π-π interaction, which promotes the formation of nanobowls rather than spherical nanostructures. Upon exposed to UV irradiation, trans-cis isomerization of azobenzene pendants occurs, leading to the increase of hydrophilicity and destruction of π-π interaction, further resulting in the disassembly of the nanobowls. Then the PAzoAA re-assembles to form crystalline ellipsoids instead of amorphous nanostructures when recovered at 70°C without UV light. We further confirm that the high incubation temperature after UV irradiation is critical for the cis-trans transformation and the high mobility of the polymer chains to facilitate the regular rearrangement of azobenzene pendants. Overall, we propose a facile method to achieve the transformation of amorphous nanobowls to crystalline ellipsoids, which may bring new insight into preparation of crystalline nanoparticles using amorphous precursors. This article is protected by copyright. All rights reserved.

Structure Regulation of Block Copolymer Assemblies in Emulsion Droplets by Adding a Selective Solvent

Generally, nanostructured polymer particles are prepared by three-dimensional (3D) confined self-assembly (3D-CSA) of block copolymers (BCPs), while micelles are obtained through self-assembly of BCPs in dilute solutions. Herein, a facile yet robust strategy is developed to regulate the assembled structures of BCP, poly(styrene-block-4-vinylpyridine) (PS-b-P4VP), from nanostructured particles to micelles. The assemblies are prepared by an emulsion-solvent diffusion-induced self-assembly route, which is conducted by dialysis. A key feature of this strategy is that a P4VP-selective solvent (e.g., ethanol) is added to the dialysate to tune the interfacial behavior of the droplets and assembled structures of PS-b-P4VP. Our results reveal that in the presence of slight ethanol, the surface and internal structural transitions of nanostructured particles are caused by changes in the interfacial selectivity and packing parameter. Interestingly, interfacial instability, which results in the formation of micelles, is observed when the dialysate contains 50 vol.% ethanol or more. The reason can be ascribed to the decreased interface tension, which is induced by the increase in ethanol and enhanced solubility of P4VP. This facile strategy provides a new opportunity to bridge the gap between traditional 3D-CSA and solution self-assembly of BCPs, offering a promising route to engineer morphologies and nanostructures of polymeric assemblies. This article is protected by copyright. All rights reserved.

Poly(vinylpyridine)-Containing Block Copolymers for Smart, Multicompartment Particles

Multicompartment particles generated by the self-assembly of block copolymers (BCPs) have received considerable attention due to their unique morphologies and functionalities. A class of important building blocks for multicomponent particles...

Triphasic Polymer Particles Assembled via Microphase Separation with Multiple Functions

This work investigated a unique type of triphasic colloidal particles composed of an azo polymer (PCNAZO), a fluorescent pyrene-containing polymer [P(MMA-co-PyMA)], and a poly(dimethylsiloxane)-based polymer (H₂pdca-PDMS), focusing on the synthesis, forming mechanism, morphology control, and functions. The triphasic particles with well-defined morphologies were assembled through the microphase separation of the components in dichloromethane (DCM) droplets in an aqueous medium, induced by the gradual evaporation of the organic solvent. The real-time fluorescence emission spectra of the pyrenyl moieties and in situ microscopic observations show that the formation of the triphasic particles undergoes the segregation of the PCNAZO-rich phase, separation between P(MMA-co-PyMA)-rich and H₂pdca-PDMS-rich phases, coalescence, and solidification in the dispersed droplets. The structure formation is due to the strong phase separation of the polymers as revealed by the calculations based on the Flory-Huggins theory. The morphologies and phase boundaries of the particles are found to be controlled by the interfacial energy between the phases and processing conditions. The triphasic particles thus obtained possess a series of interesting functions stemming from the polymers and the triple-compartmentalized structures. After being deposited on a substrate, the H₂pdca-PDMS parts can tightly adhere on the surface, caused by the spreading nature of the polymer when slightly swelled by DCM. Upon irradiation with a linearly polarized laser beam at 488 nm, the azo polymer compartments show a significant elongation along the electric vibration direction of the polarized light, accompanied by the cooperative deformation of the H₂pdca-PDMS pads. When dispersed in water and adhered on the substrate surface, the triphasic particles exhibit tunable colors originating from the fluorescence of the pyrenyl fluorophores and light absorption of the azo chromophores. The real-time investigation methods developed here could lead to the deep understanding of the structure formation process in the confined volume and be applied in phase-separation study of other polymers as well.