Degradable Polymer Structures from Carbon Dioxide and Butadiene

Bifunctional and recyclable polyesters by chemoselective ring-opening polymerization of a δ-lactone derived from CO2 and butadiene

When aiming at the direct use of CO2 for the preparation of advanced/value-added materials, the synthesis of CO2/olefin copolymers is very appealing but challenging. The δ-lactone 3-ethylidene-6-vinyltetrahydro-2H-pyran-2-one (EVP), synthesized by telomerization of CO2 with 1,3-butadiene, is a promising monomer. However, its chemoselective ring-opening polymerization (ROP) is hampered by unfavorable thermodynamics and the competitive polymerization of highly reactive C=C double bonds under usual conditions. Herein, we report the chemoselective ROP of EVP using a phosphazene/urea binary catalyst, affording exclusively a linear unsaturated polyester poly(EVP)ROP, with a molar mass (Mn) up to 16.1 kg·mol-1 and a narrow distribution (Ð < 1.6), which can be fully recycled back to the pristine monomer, thus establishing a monomer-polymer-monomer closed-loop life cycle. In these polyesters, the CO2 content reaches 33 mol% (29 wt%). The reasons for the unexpected chemoselectivity were investigated by Density-functional theory (DFT) calculations. The poly(EVP)ROP features two pendent C=C double bonds per repeating unit, which show distinct reactivity and thus can be properly engaged in sequential functionalizations towards the synthesis of bifunctional polyesters. We disclose here a methodology providing a facile access to bifunctional and recyclable polyesters from readily available feedstocks.

Monomer-Recyclable Polyester from CO2 and 1,3-Butadiene

Synthesis of monomer-recyclable polyesters solely from CO2 and bulk olefins holds great potential in significantly reducing CO2 emissions and addressing the issue of plastic pollution. Due to the kinetic disadvantage of direct copolymerization of CO2 and bulk olefins compared to homopolymerization of bulk olefins, considerable research attention has been devoted to synthesis of polyester via the ring-opening polymerization (ROP) of a six-membered disubstituted lactone intermediate, 1,2-ethylidene-6-vinyl-tetrahydro-2H-pyran-2-one (𝜹-L), obtained from telomerization of CO2 and 1,3-butadiene. However, the conjugate olefin on the six-membered ring of 𝜹-L leads to serious Michael addition side reactions. Thus, the selective ROP of 𝜹-L, which can precisely control the repeating unit for the production of polyesters potentially amenable to efficient monomer recycling, remains an unresolved challenge. Herein, the first example of selective ROP of 𝜹-L is reported using a combination of organobase and N,N'-Bis[3,5-bis(trifluoromethyl)phenyl]urea as the catalytic system. Systematic modifications of the substituent of the urea show that the presence of electron-deficient 3,5-bis(trifluoromethyl)-phenyl groups is the key to the extraordinary selectivity of ring opening over Michael addition. Efficient monomer recovery of oligo(𝜹-L) is also achieved under mild catalytic conditions.

Polyester Platform with High Refractive Indices and Closed-Loop Recyclability from CO2, 1,3-Butadiene, and Thiols

α-Ethylidene-δ-vinyl-δ-valerolactone (EVL) is the only intermediate to synthesize copolymers of CO2 with 1,3-butadiene whose ring-opening polymerization (ROP), however, is obstructed by the tiglate group. In the contribution, EVL derivatives are synthesized through a Michael addition reaction to saturate the conjugated double bond as well as introduce various groups to synthesize polyesters with designable molecular weights (Mn = 6.9-12.8 kg·mol-1), narrow dispersities (Đ = 1.08-1.19), tunable glass-transition temperatures (Tg = -45-3 °C), and excellent refractive indices (nd = 1.64-1.79) via living and controlled ROP. The obtained polyesters are able to be recycled to the corresponding monomers, which can prepare comparable polymers with identical side groups, realizing the homorecycling. In addition, the retro-Michael addition reaction is established and employed, realizing heterorecycling, which can alter properties during recycling. We propose a strategy for EVL derivatives and establish the corresponding polyester platform with not only high refractive indices and tunable Tgs, but also the ability to tailor properties during recycling.

Anionic Conjugate Addition Oligomerization of Carbon Dioxide/Butadiene Derived Lactones

Nucleophilic and non-nucleophilic bases have been employed in anionic oligomerization of unsaturated δ-valerolactone (3-ethylidene-6-vinyltetrahydro-2H-pyran-2-one) (1). Compared to the seminal findings with 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), the unsaturated lactone reacts with guanidines, disilazanes, and phosphazenes both in bulk and in solution with higher productivities and activities, reaching full conversion with turnover frequencies up to 382 h-1. Additionally, reactions using phosphazenes and NaHMDS were active at 1 mol % catalyst loadings both in solvent and in bulk monomer at room temperature. Characterization of the reaction products by 1H, 13C, FTIR, MALDI-MS, tandem mass spectrometry (MS/MS), and ion mobility mass spectrometry (IM-MS) revealed microstructural differences dependent on the nucleophilicity of the organocatalytic base and reaction conditions. The products from phosphazene-catalyzed reactions are consistent with selective vinylogous 1,4-conjugate addition, whereas both conjugate addition and ring-opening mechanisms are observed in TBD. DSC reveals that these microstructures can be tuned to have a Tg range between -18 and 80 °C, while SEC and MALDI-MS reveal that only low molar mass oligomers are formed (748-5949 g/mol). From these results, an approach for selectively favoring the vinylogous 1,4-conjugate addition pathway is obtained over ring-opening reactivity.

Sustainable Copolymer Synthesis from Carbon Dioxide and Butadiene

Carbon dioxide (CO2) has long been recognized as an ideal C1 feedstock comonomer for producing sustainable materials because it is renewable, abundant, and cost-effective. However, activating CO2 presents a significant challenge because it is highly oxidized and stable. A CO2/butadiene-derived δ-valerolactone (EVP), generated via palladium-catalyzed telomerization between CO2 and butadiene, has emerged as an attractive intermediate for producing sustainable copolymers from CO2 and butadiene. Owing to the presence of two active carbon-carbon double bonds and a lactone unit, EVP serves as a versatile intermediate for creating sustainable copolymers with a CO2 content of up to 29 wt % (33 mol %). In this Review, advances in the synthesis of copolymers from CO2 and butadiene with divergent structures through various polymerization protocols have been summarized. Achievements made in homo- and copolymerization of EVP or its derivatives are comprehensively reviewed, while the postmodification of the obtained copolymers to access new polymers are also discussed. Meanwhile, potential applications of the obtained copolymers are also discussed. The literature references were sorted into sections based on polymerization strategies and mechanisms, facilitating readers in gaining a comprehensive view of the present chemistry landscape and inspiring innovative approaches to synthesizing novel CO2-derived copolymers.

Functional and Degradable Polyester-co-polyethers from CO2, Butadiene, and Epoxides

Carbon dioxide (CO2), as a renewable and nontoxic C1 feedstock, has been recognized as an ideal comonomer to prepare sustainable materials. In this regard, substantial focus has been dedicated to the ring-opening copolymerization of CO2 and epoxides, which results in the creation of aliphatic polycarbonates in most cases. Here, we report an unprecedented strategy to synthesize functional and degradable polyester-co-polyethers from CO2, butadiene, and epoxides via a CO2/butadiene-derived δ-valerolactone intermediate (EVP). Utilizing a chromium salen complex as the catalyst, the copolymerization of EVP and epoxides was successfully achieved to produce CO2/butadiene/epoxide terpolymers. The obtained polyester-co-polyethers with varied 39-93 mol % EVP content (equal to 18-28 wt % CO2 incorporation) show high thermal stability, tunable glass-transition temperatures, on-demand functionality, and good chemical degradability. This method extends the potential to access functional CO2-based polymers.

Synthesis and Deconstruction of Polyethylene-type Materials

Polyethylene deconstruction to reusable smaller molecules is hindered by the chemical inertness of its hydrocarbon chains. Pyrolysis and related approaches commonly require high temperatures, are energy-intensive, and yield mixtures of multiple classes of compounds. Selective cleavage reactions under mild conditions ( Collapse

Key Words Collapse

MESH Headings Collapse

Grants

• H2020 European Research Council

Collapse

Affiliation(s)

Simon T. Schwab Chair of Chemical Materials Science, Department of Chemistry, University of Konstanz, Universitätsstraße 10, 78464 Konstanz, Germany
Maximilian Baur Chair of Chemical Materials Science, Department of Chemistry, University of Konstanz, Universitätsstraße 10, 78464 Konstanz, Germany
Taylor F. Nelson Chair of Chemical Materials Science, Department of Chemistry, University of Konstanz, Universitätsstraße 10, 78464 Konstanz, Germany
Stefan Mecking Chair of Chemical Materials Science, Department of Chemistry, University of Konstanz, Universitätsstraße 10, 78464 Konstanz, Germany

Collapse

Four-Arm Polymer-Guided Formation of Curcumin-Loaded Flower-Like Porous Microspheres as Injectable Cell Carriers for Diabetic Wound Healing

Stem cell injection is an effective approach for treating diabetic wounds; however, shear stress during injections can negatively affect their stemness and cell growth. Cell-laden porous microspheres can provide shelter for bone mesenchymal stem cells (BMSC). Herein, curcumin-loaded flower-like porous microspheres (CFPM) are designed by combining phase inversion emulsification with thermally induced phase separation-guided four-arm poly (l-lactic acid) (B-PLLA). Notably, the CFPM shows a well-defined surface topography and inner structure, ensuring a high surface area to enable the incorporation and delivery of a large amount of -BMSC and curcumin. The BMSC-carrying CFPM (BMSC@CFPM) maintains the proliferation, retention, and stemness of -BMSCs, which, in combination with their sustainable curcumin release, facilitates the endogenous production of growth/proangiogenic factors and offers a local anti-inflammatory function. An in vivo bioluminescence assay demonstrates that BMSC@CFPM can significantly increase the retention and survival of BMSC in wound sites. Accordingly, BMSC@CFPM, with no significant systemic toxicity, could significantly accelerate diabetic wound healing by promoting angiogenesis, collagen reconstruction, and M2 macrophage polarization. RNA sequencing further unveils the mechanisms by which BMSC@CFPM promotes diabetic wound healing by increasing -growth factors and enhancing angiogenesis through the JAK/STAT pathway. Overall, BMSC@CFPM represents a potential therapeutic tool for diabetic wound healing.

The Divergent Reactivity of Lactones Derived from Butadiene and Carbon Dioxide in Macromolecular Synthesis

The catalytic conversion of carbon dioxide and 1,3-butadiene into unsaturated lactone monomers provides an efficient route for converting sustainable carbon feedstocks into novel macromolecules. The chemical reactivity of this monomer is reviewed in order to highlight the many viable mechanistic pathways. Polymerization strategies, monomer alterations, and post-polymerization modifications are covered. The polymerization methods include radical, coordination, conjugate addition, ring-opening, olefin metathesis, and thiol-ene chemistries. Materials derived from these processes possess a wide range of function including responsiveness, degradability, adhesion, recyclability, and self-assembly. These aspects along with the advances in polymer chemistry that make them possible are discussed, along with a perspective on the future directions of the field.

3-Ethyl-6-vinyltetrahydro-2H-pyran-2-one (EVP): a versatile CO2-derived lactone platform for polymer synthesis

3-Ethyl-6-vinyltetrahydro-2H-pyran-2-one (EVP) is a CO₂-derived lactone synthesized via Pd-catalyzed telomerization of butadiene. As EVP is 28.9% by weight CO₂, it has received significant recent attention as an intermediary for the synthesis of high CO₂-content polymers. This article provides an overview of strategies for the polymerization of EVP to a wide variety of polymer structures, ranging from radical polymerizations to ring-opening polymerizations, that each take unique advantage of the highly functionalized lactone.

Tunable and recyclable polyesters from CO2 and butadiene

Carbon dioxide is inexpensive and abundant, and its prevalence as waste makes it attractive as a sustainable chemical feedstock. Although there are examples of copolymerizations of CO₂ with high-energy monomers, the direct copolymerization of CO₂ with olefins has not been reported. Here an alternative route to functionalizable, recyclable polyesters derived from CO₂, butadiene and hydrogen via an intermediary lactone, 3-ethyl-6-vinyltetrahydro-2H-pyran-2-one, is described. Catalytic ring-opening polymerization of the lactone by 1,5,7-triazabicyclo[4.4.0]dec-5-ene yields polyesters with molar masses up to 13.6 kg mol^-1 and pendent vinyl side chains that can undergo post-polymerization functionalization. The polymer has a low ceiling temperature of 138 °C, allowing for facile chemical recycling, and is inherently biodegradable under aerobic aqueous conditions (OECD-301B protocol). These results show that a well-defined polyester can be derived from CO₂, olefins and hydrogen, expanding access to new polymer feedstocks that were once considered unfeasible.

Advances in the Synthesis of Copolymers from Carbon Dioxide, Dienes, and Olefins

ConspectusCarbon dioxide (CO₂) has long been considered a sustainable comonomer for polymer synthesis due to its abundance, easy availability, and low toxicity. Polymer synthesis from CO₂ is highly attractive and has received continuous interest from synthetic chemists. In this regard, alternating copolymerization of CO₂ and epoxides is one of the most well-established methods to synthesize aliphatic polycarbonates. Moreover, binucleophiles including diols, diamines, amino alcohols, and diynes have been reported to copolymerize with CO₂ to give polycarbonates, polyureas, polyurethanes, and polyesters, respectively. Nevertheless, little success has been made for incorporating CO₂ into the most widely used polyolefin materials.Although extensive studies have been focused on the copolymerization of olefins and CO₂, most of the attempted reactions resulted in olefin homopolymerization owing to the endothermic property and high energy barriers of CO₂ insertion during the chain propagation process. In this Account, we show how this challenge is addressed by taking advantage of a metastable lactone intermediate, 3-ethylidene-6-vinyltetrahydro-2H-pyran-2-one (EVP), which is produced from CO₂ and butadiene via palladium catalysis. Homopolymerization of EVP furnishes CO₂/butadiene copolymers with up to 29 wt % of CO₂ content. This reaction strategy represents a breakthrough for the long-standing challenge of inherent kinetic and thermodynamically unfavorable CO₂/olefin copolymerization. A new class of polymeric materials bearing repeating bicyclic lactone and unsaturated lactone units can be obtained. Importantly, one-pot copolymerization of CO₂/butadiene or terpolymerization of CO₂/butadiene/diene can be achieved to afford copolymers through a two-step reaction protocol. Interestingly, the bicyclic lactone units in the polymer chain can undergo ring-opening through hydrolysis and aminolysis, while reversible ring-closing of the hydrolyzed or aminolyzed units was also achieved simply by heating.Over the past few years, more and more studies have utilized EVP as an intermediate to synthesize copolymers from olefins, butadiene, and CO₂. Recently, we successfully incorporated CO₂ into the most widely used polyethylene materials via the direct copolymerization of EVP and ethylene. Taking advantage of the bifunctional reactivity of EVP, we were able to access two types of main-chain-functionalized polyethylenes through palladium-catalyzed coordination/insertion copolymerization and radical copolymerization. Besides polyethylenes, CO₂ was also incorporated into poly(methyl methacrylate), poly(methyl acrylate), polystyrene, polymethyl acrylate, polyvinylchloroacetate, and poly(vinyl acetate) materials via radical copolymerization of EVP and olefin monomers. The EVP/olefin copolymerization strategy provides a novel avenue for the synthesis of highly versatile copolymers from an olefin, CO₂, and butadiene.

Chemically Recyclable CO2 -Based Solid Polyesters with Facile Property Tunability

Synthesizing chemically recyclable solid polymeric materials is a significant strategy to potentially achieve carbon neutral production of new polymers and alleviate plastic pollution, especially when the synthesis is based on CO₂ and inexpensive co-feedstocks available in large scales. Additionally, polymeric materials should have high enough molecular weight to exhibit distinguished properties from low molar mass polymers to serve for a broader range of application scenarios. However, up to now, strategies for developing solid-state CO₂ -based chemically recyclable polyesters with both high molecular weight and facile property tunability are still unprecedented. Herein, a brand-new synthetic route is developed to synthesize chemically recyclable CO₂ -based solid polyesters with high molecular weight (M_n up to 587.7 kg mol^-1 ) and narrow dispersity (Đ < 1.2), which should further broaden the potential application scenarios of new CO₂ -based polyesters. Additionally, complete monomer recovery from poly(δLH₂ ) material is also achieved. The preserved terminal alkene groups allow facile property tuning of the polyesters via photo-initiated thiol-ene click reactions, enabling more potential utilities and further functionalizations. This article is protected by copyright. All rights reserved.