Controllable Supramolecular Polymerization through Host-Guest Interaction and Photochemistry

Supramolecular Complexation of Azobenzene Dyes by Cucurbit[7]uril

This report describes cucurbit[7]uril (CB7) complexation of azobenzene dyes that have a 4-(N,N'-dimethylamino) or 4-amino substituent. Absorption and NMR data show that CB7 encapsulates the protonated form of the azobenzene and that the complexed dye exists as its azonium tautomer with a trans azo conformation and substantial quinoid resonance character. Because CB7 complexation stabilizes the dye conjugate acid, there is an upward shift in its pKa, and in one specific case, the pKa of the protonated azobenzene is increased from 3.09 to 4.47. Molecular modeling indicates that the CB7/azobenzene complex is stabilized by three major noncovalent factors: (i) ion-dipole interactions between the partially cationic 4-(N,N'-dimethylamino) or 4-amino group on the encapsulated protonated azobenzene and the electronegative carbonyl oxygens on CB7, (ii) inclusion of the upper aryl ring of the azobenzene within the hydrophobic CB7 cavity, and (iii) a hydrogen bond between the proton on the azo nitrogen and CB7 carbonyls. CB7 complexation enhances azobenzene stability and increases azobenzene hydrophilicity; thus, it is a promising way to improve azobenzene performance as a pigment or prodrug. In addition, the striking yellow/pink color change that accompanies CB7 complexation can be exploited to create azobenzene dye displacement assays with naked eye detection.

Stimuli-responsive mechanically interlocked molecules constructed from cucurbit[n]uril homologues and derivatives

Cucurbit[n]uril supramolecular chemistry has developed rapidly since 2001 when different cucurbit[n]uril homologues (Q[n]) were successfully separated in pure form. The combination of Q[n] cavity size and various types of external stimuli has given birth to numerous types of Q[n]-based mechanically interlocked molecules (MIMs), including (pseudo)rotaxanes, catenanes, dendrimers and poly(pseudo)rotaxanes. In this review article, the important advances in the field of Q[n]-based MIMs over the past two decades are highlighted. This review also describes examples of heterowheel (pseudo)rotaxanes and poly(pseudo)rotaxanes involving Q[n]s, and reflects on the opportunities and challenges of constructing Q[n]-based stimuli-responsive MIMs.

Light-responsive nanochannels based on the supramolecular host–guest system

The light-responsive nanochannel of rhodopsin gained wider research interest from its crucial roles in light-induced biological functions, such as visual signal transduction and energy conversion, though its poor stability and susceptibility to inactivation in vitro have limited its exploration. However, the fabrication of artificial nanochannels with the properties of physical stability, controllable structure, and easy functional modification becomes a biomimetic system to study the stimulus-responsive gating properties. Typically, light-responsive molecules of azobenzene (Azo), retinal, and spiropyran were introduced into nanochannels as photo-switches, which can change the inner surface wettability of nanochannels under the influence of light; this ultimately results in the photoresponsive nature of biomimetic nanochannels. Furthermore, the fine-tuning of their stimulus-responsive properties can be achieved through the introduction of host–guest systems generally combined with a non-covalent bond, and the assembling process is reversible. These host–guest systems have been introduced into the nanochannels to form different functions. Based on the host–guest system of light-responsive reversible interaction, it can not only change the internal surface properties of the nanochannel and control the recognition and transmission behaviors but also realize the controlled release of a specific host or guest molecules in the nanochannel. At present, macrocyclic host molecules have been introduced into nanochannels including pillararenes, cyclodextrin (CD), and metal–organic frameworks (MOFs). They are introduced into the nanochannel through chemical modification or host–guest assemble methods. Based on the changes in the light-responsive structure of azobenzene, spiropyran, retinal, and others with macrocycle host molecules, the surface charge and hydrophilic and hydrophobic properties of the nanochannel were changed to regulate the ionic and molecular transport. In this study, the development of photoresponsive host and guest-assembled nanochannel systems from design to application is reviewed, and the research prospects and problems of this photo-responsive nanochannel membrane are presented.

Concurrent self-regulated autonomous synthesis and functionalization of pH-responsive giant vesicles by a chemical pH oscillator

The semibatch BrO3--SO32- pH oscillator serves as the radical source for the in situ polymerization of the pH-responsive 2-(diisopropylamino)-ethyl methacrylate monomer on poly(ethylene-glycol)-macroCTA chain and generates an amphiphilic block copolymer. These building blocks concurrently self-assemble to micelles and then transforms to vesicles as the chain length of the hydrophobic block growths. Large amplitude oscillations in the concentration of H+ by the semibatch BrO3--SO32- are provoked when the conditions in the system are favorable. The oscillations control the protonation state of the tertiary amine group in the core segment of the block copolymer. Rhythmic assembly-disassembly of the polymer structures is observed. All processes, from the time- regulated autonomous formation of the building blocks, their self-assembly and the rhythmic disassembly-reassembly are governed by the same simple chemical system, in the same reaction vessel, without complicated multi step procedures and are fueled and kept out of equilibrium by the uniform inflow of SO32-.

Oligomeric Cucurbituril Complexes: from Peculiar Assemblies to Emerging Applications

Proteins are an endless source of inspiration. By carefully tuning the amino-acid sequence of proteins, nature made them evolve from primary to quaternary structures, a property specific to protein oligomers and often crucial to accomplish their function. On the other hand, the synthetic macrocycles cucurbiturils (CBs) have shown outstanding recognition properties in water, and a growing number of (host)_n :(guest)_n supramolecular polymers involving CBs have been reported. However, the burgeoning field of discrete (n:n) host:guest oligomers has just started to attract attention. While 2:2 complexes are the major oligomers, 3:3 and up to 6:6 oligomers have been described, some associated with emerging applications, specific to the (n:n) arrangements. Design rules to target (n:n) host:guest oligomers are proposed toward new advanced host:guest systems.

Facile Construction of a Supramolecular Organic Framework Using Naphthyl Viologen Guests and CB[8] Host via Charge-Transfer Complexation

Herein, we report the synthesis of guest-host systems comprising naphthyl-viologen-naphthyl (Np-Vio-Np) and viologen-naphthyl-viologen (Vio-Np-Vio) guest molecules and their subsequent supramolecular polymerization in the presence of a CB[8] host in water. In addition, the guest complexation of ethyl-terminated trimeric viologen (ETV) with Np-Vio-Np and CB[8] was investigated. As a result of supramolecular interactions, 2D supramolecular organic frameworks with high internal periodicity were constructed. 1H NMR studies clearly demonstrated the formation of a host-stabilized charge-transfer complex via folding back (Np-Vio-Np and Vio-Np-Vio) in the presence of CB[8]. In the case of ETV + Np-Vio-Np + CB[8], a large polymeric network was formed as indicated by the NMR titrations. UV-vis and fluorescence studies clearly confirm the formation of an inter/intra molecular CT complex upon complexation with cucurbit[8]uril. The size obtained using the dynamic light scattering (DLS) method pinpoints the formation of larger supramolecular aggregates in the order of μm through host-guest assembly, which is further complemented by FESEM and TEM. SAXS measurements indicate the formation of a 2D supramolecular polymer/polymer aggregate with long-range order.

Cucurbit[8]uril-Based Polymers and Polymer Materials

Cucurbit[8]uril (CB[8]) is unique and notable in the cucurbit[n]uril family, since it has a relatively large cavity and thus is able to simultaneously accommodate two guest molecules. Typically, an electron-deficient first guest and an electron-rich second guest can be bound by CB[8] to form a stable 1:1:1 heteroternary supramolecular complex. Additionally, two homo guests can also be strongly dimerized inside the cavity of CB[8] to form a 2:1 homoternary supramolecular complex. During the past decade, by combining polymer science and CB[8] host-guest chemistry, a variety of systems have been established to construct supramolecular polymers with polymer chains typically at the nanoscale/sub-microscale, and CB[8]-based micro/nanostructured polymer materials in the form of polymer networks and hydrogels, microcapsules, micelles, vesicles, and colloidal particles, normally in solution and occasionally on surfaces. This Review summarizes the noncovalent interactions and strategies used for the preparation of CB[8]-based polymers and polymer materials with a focus on the representative and latest developments, followed by a brief discussion of their characterization, properties, and applications.

Multi-mode supermolecular polymerization driven by host-guest interactions

A novel supermolecular self-assembly based on ternary host-guest interaction between cucurbit[8]uril (CB[8]), 1,1'-dimethyl-4,4'-bipyridinium dication (MV) and coumarin derivative was applied for the construction of linear supramolecular polymer with high degree of polymerization in aqueous solution. Accompanied by the introduction of azobenzene on linear ABBA type monomer the supermolecular polymerization is different and the morphology changes from linear to dendritic polymer. The successful supramolecular polymerization of linear and dendritic supramolecular polymers by non-covalent host-guest molecular recognition was confirmed by various characterization methods, such as 1H NMR spectroscopy, ROESY, transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements. Meanwhile, the supramolecular polymerization could promote the conversion of the azobenzene from cis to trans, which ultimately results in no isomerism upon UV irradiation.

Synthesis of Hydrazines via Radical Generation and Addition of Azocarboxylic tert-Butyl Esters

A new chemistry of azo compounds that is a radical generation and addition in situ of azocarboxylic tert-butyl esters to synthesize hydrazines has been described. The protocol provides a novel strategy for the synthesis of various hydrazines. The advantages of the transformation include broad substrate scope, benign conditions, and convenient operation.

Reversible 2D Supramolecular Organic Frameworks encompassing Viologen Cation Radicals and CB[8]

Reversible 2D supramolecular organic frameworks encompassing branched viologen architectures and cucurbit[8]uril (CB[8]) were constructed and investigated. UV-vis investigation clearly indicates the formation and intermolecular dimerization of monocation radicals and their encapsulation into the hydrophobic CB[8] cavity which is further complemented by EPR (electron paramagnetic resonance) spectroscopy. Particle size measurements by dynamic light scattering method showed particle sizes in the range of several µm indicating larger aggregates. Zeta potential measurements suggested the instability of these particles and their tendency to form aggregates. TEM (transmission electron microscope) analysis further revealed the formation of supramolecular polymer (monocation radical with cucurbit[8]uril) whose diameter were in the range of several µm as indicated by DLS measurements; however the oxidized form, i.e., the viologen dication with cucurbit[8]uril showed dotted spots in the range of sub nanometer level. The internal periodicities of the supramolecular polymers were analyzed by SAXs (small angle X-ray scattering) measurements. Additionally, we have demonstrated that these supramolecular organic frameworks can be depolymerized by oxidation in air and again can be polymerized (intermolecular radical dimerization) by reduction under inert atmosphere demonstrating that these systems will be of broad interest.

Photoresponsive Supramolecular Polymer Networks via Hydrogen Bond Assisted Molecular Tweezer/Guest Complexation

Noncovalent molecular recognition exerts significant impact on the structure and functionality of self-assembled materials. In this work, we have developed a novel strategy toward supramolecular polymer networks, with the utilization of molecular tweezer/guest complexation as the cross-linkages. Intermolecular O-H···N hydrogen bond is embedded in bis[alkynylplatinum(II)] terpyridine molecular tweezer/trans-azobenzene recognition motif, which could not only enhance the cross-linking strength, but also endow photoresponsiveness to the supramolecular network assemblies. Moreover, supramolecular polymer networks display intriguing singlet oxygen generation capability due to the inherent incorporation of organoplatinum(II) units. Hence, it offers a new avenue toward supramolecular materials via the combination of π-functionality, processability, and stimuli-responsiveness in an elaborate manner.

Tunable assembly and disassembly of responsive supramolecular polymer brushes

Tunable assembly and disassembly of stimuli-responsive supramolecular polymer brushes are induced by using host–guest interactions between β-cyclodextrin and azobenzene groups.

Controllable Supramolecular Polymerization Promoted by Host-Enhanced Photodimerization

In this letter, we report a new method of controllable supramolecular polymerization, taking advantage of host-enhanced photodimerization. The low-molecular-weight supramolecular oligomers were formed by noncovalent complexation between cucurbit[8]urils (CB[8]) and the bifunctional monomers (DBN) with Brooker's merocyanine moiety (MOED) on either end. Interestingly, when irradiated with UV light, the supramolecular oligomers could transform into supramolecular polymers with high molecular weight. The molecular weight of supramolecular polymers could be controlled by varying the irradiation time. It is highly anticipated that this work can enrich the methods on the modulation of supramolecular polymerization.

Supramolecular Microgels Fabricated from Supramonomers

This letter describes a new method for fabricating supramolecular microgels from supramonomers. To this end, we designed and assembled supramonomers with one acrylate moiety on each end on the basis of noncovalent host-guest interactions, which could be utilized as a cross-linker. Then supramolecular microgels were fabricated through the copolymerization of supramonomers and N-isopropylacrylamide (NIPAm). The supramolecular microgels not only showed temperature-responsive properties as expected from conventional PNIPAm-based microgels but also exhibited stimuli-responsive and degradable properties benefiting from the dynamic nature of supramonomers. In addition, it was found that the degradation kinetics of the supramolecular microgels was related greatly to the structure of the microgels, providing a way to tune the degradation kinetics of the supramolecular microgels. Various supramolecular microgels with desired structure and function are supposed to be facilely fabricated from supramonomers. It is anticipated that the supramolecular microgels can enrich the application of microgels by easily endowing the microgels with stimuli-responsive and degradable properties.

Mechanized azobenzene-functionalized zirconium metal-organic framework for on-command cargo release

Stimuli-responsive metal-organic frameworks (MOFs) have gained increasing attention recently for their potential applications in many areas. We report the design and synthesis of a water-stable zirconium MOF (Zr-MOF) that bears photoresponsive azobenzene groups. This particular MOF can be used as a reservoir for storage of cargo in water, and the cargo-loaded MOF can be further capped to construct a mechanized MOF through the binding of β-cyclodextrin with the azobenzene stalks on the MOF surface. The resulting mechanized MOF has shown on-command cargo release triggered by ultraviolet irradiation or addition of competitive agents without premature release. This study represents a simple approach to the construction of stimuli-responsive mechanized MOFs, and considering mechanized UiO-68-azo made from biocompatible components, this smart system may provide a unique MOF platform for on-command drug delivery in the future.

Tuning the Energy Gap by Supramolecular Approaches: Towards Near-Infrared Organic Assemblies and Materials

Near-infrared (NIR) organic materials are of great importance for both fundamental research and practical applications. While much effort has been taken to covalently design and synthesize NIR organic materials with a low energy gap, there are supramolecular approaches for tuning the energy gap to noncovalently fabricate NIR organic assemblies and materials. In this concept article, we summarize and discuss several supramolecular approaches, including the fabrication of charge transfer supramolecular complexes, the fabrication of supramolecular J-aggregates, and the fabrication of supramolecularly stabilized organic radicals. The nature of noncovalent interactions in supramolecular approaches can provide NIR organic assemblies and materials with unique properties such as reversibility, stimuli-responsiveness, recyclability, and adaptive abilities.

Controllable supramolecular polymerization through self-sorting of aliphatic and aromatic motifs

Self-sorting is one of the effective strategies to realize control over supramolecular polymerization.

Aggregation induced emission of a cyanostilbene amphiphile as a novel platform for FRET-based ratiometric sensing of mercury ions in water

A self-assembled FRET system on the basis of a cyanostilbene amphiphile has been constructed for ratiometric sensing of mercury ions in water.

Supramolecular Polymerization Controlled by Reversible Conformational Modulation

We report a new method for fabricating supramolecular polymers with controlled structure and molecular weight through reversible conformational modulation. To this end, the crown-ether-based "taco complex" was introduced. We prepared a monomer containing a bis(m-phenylene)-32-crown-10 in the core, which can supramolecularly polymerize efficiently in solution. When the conformation of the crown ether core was folded into a taco complex, the linear supramolecular polymerization could be significantly depressed, thus decreasing the molecular weight of the supramolecular polymer. In addition, extracting the depolymerizing agent with aqueous solution of cucurbit[7]uril could disassociate the taco complex and regenerate the supramolecular polymer with molecular weight as high as before. It is anticipated that this study can provide a facile and general methodology for controllable supramolecular polymerization.

CO₂-Responsive Pillar[5]arene-Based Molecular Recognition in Water: Establishment and Application in Gas-Controlled Self-Assembly and Release

Here we developed a novel CO2-responsive pillararene-based molecular recognition motif established from a water-soluble pillar[5]arene and an anionic surfactant, sodium dodecyl sulfonate (SDS). The inclusion complex acted as a supramolecular amphiphile and self-assembled into spherical bilayer vesicles as confirmed by DLS, SEM, and TEM experiments. These vesicles were disrupted upon bubbling N2 or adding much more SDS to eliminate the inclusion complex. The assembly and disassembly of vesicles were successfully employed in gas and surfactant triggered releases of calcein, a water-soluble dye.