Enhancing Initiation Efficiency in Metal-Free Surface-Initiated Atom Transfer Radical Polymerization (SI-ATRP)

Recent developments in visible light induced polymerization towards its application to nanopores

Visible light induced polymerizations are a strongly emerging field in recent years. Besides the often mild reaction conditions, visible light offers advantages of spatial and temporal control over chain growth, which makes visible light ideal for functionalization of surfaces and more specifically of nanoscale pores. Current challenges in nanopore functionalization include, in particular, local and highly controlled polymer functionalizations. Using spatially limited light sources such as lasers or near field modes for light-induced polymer functionalization is envisioned to allow local functionalization of nanopores and thereby improve nanoporous material performance. These light sources are usually providing visible light while classical photopolymerizations are mostly based on UV-irradiation. In this review, we highlight developments in visible light induced polymerizations and especially in visible light induced controlled polymerizations as well as their potential for nanopore functionalization. Existing examples of visible light induced polymerizations in nanopores are emphasized.

Ultrafast Visible-Light-Induced ATRP in Aqueous Media with Carbon Quantum Dots as the Catalyst and Its Application for 3D Printing

Photoinduced atom transfer radical polymerization (ATRP) has been proved to be a versatile technique for polymer network formation. However, the slow polymerization rates of typical ATRP limited its application in the field of additive manufacturing (3D printing). In this work, we introduced carbon quantum dots (CQDs) for the first time to the ATRP in aqueous media and developed an ultrafast visible-light-induced polymerization system. After optimization, the polymerization could achieve a high monomer conversion (>90%) within 1 min, and the polydispersity index (PDI) of the polymer was lower than 1.25. This system was then applied as the first example of ATRP for the 3D printing of hydrogel through digital light processing (DLP), and the printed object exhibited good dimensional accuracy. Additionally, the excellent and stable optical properties of CQDs also provided interesting photoluminescence capabilities to the printed objects. We deduce this ATRP mediated 3D printing process would provide a new platform for the preparation of functional and stimuli-responsive hydrogel materials.

Crosslinking of Pressure-Sensitive Adhesives with Polymer-Grafted Nanoparticles

Nanocomposite filler particles provide multiple routes to mechanically reinforce pressure-sensitive adhesives (PSAs), as their large surface area to volume ratios provide a means of effectively crosslinking multiple polymer chains. A major advancement could therefore be enabled by the design of a particle architecture that forms multiple physical and chemical interactions with the surrounding polymer matrix, while simultaneously ensuring particle dispersion and preventing particle aggregation. Understanding how such multivalent interactions between a nanoparticle crosslinking point and the PSA polymer affect material mechanical performance would provide both useful scientific knowledge on the mechanical structure-property relationships in polymer composites, as well as a new route to synthesizing useful PSA materials. Herein, we report the use of polymer-grafted nanoparticles (PGNPs) composed of poly(n-butyl acrylate-co-acrylic acid) chains grafted to SiO₂ nanoparticle (NP) surfaces to cohesively reinforce PSA films against shear stress without compromising their adhesive properties. The use of acrylic acid-decorated PGNPs allows for ionic crosslinking via metal salt coordination to be used in conjunction with physical entanglement, yielding 33% greater shear resistance and up to 3-fold longer holding times under static load. In addition, the effects of material parameters such as PGNP/crosslinker loading, polymer graft length, and core nanoparticle size on mechanical properties are also explored, providing insights into the use of PGNPs for the rational design of polymer composite-based PSAs.

Surface-Immobilized Photoinitiators for Light Induced Polymerization and Coupling Reactions

Straightforward and versatile surface modification, functionalization and coating have become a significant topic in material sciences. While physical modification suffers from severe drawbacks, such as insufficient stability, chemical induced grafting processes efficiently modify organic and inorganic materials and surfaces due to covalent linkage. These processes include the "grafting from" method, where polymer chains are directly grown from the surface in terms of a surface-initiated polymerization and the "grafting to" method where a preformed (macro)-molecule is introduced to a preliminary treated surface via a coupling reaction. Both methods require an initiating species that is immobilized at the surface and can be triggered either by heat or light, whereas light induced processes have recently received increasing interest. Therefore, a major challenge is the ongoing search for suitable anchor moieties that provide covalent linkage to the surface and include initiators for surface-initiated polymerization and coupling reactions, respectively. This review containing 205 references provides an overview on photoinitiators which are covalently coupled to different surfaces, and are utilized for subsequent photopolymerizations and photocoupling reactions. An emphasis is placed on the coupling strategies for different surfaces, including oxides, metals, and cellulosic materials, with a focus on surface coupled free radical photoinitiators (type I and type II). Furthermore, the concept of surface initiation mediated by photoiniferters (PIMP) is reviewed. Regarding controlled radical polymerization from surfaces, a large section of the paper reviews surface-tethered co-initiators, ATRP initiators, and RAFT agents. In combination with photoinitiators or photoredox catalysts, these compounds are employed for surface initiated photopolymerizations. Moreover, examples for coupled photoacids and photoacid generators are presented. Another large section of the article reviews photocoupling and photoclick techniques. Here, the focus is set on light sensitive groups, such as organic azides, tetrazoles and diazirines, which have proven useful in biochemistry, composite technology and many other fields.

Photoinduced Organocatalyzed Atom Transfer Radical Polymerization (O-ATRP): Precision Polymer Synthesis Using Organic Photoredox Catalysis

The development of photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) has received considerable attention since its introduction in 2014. Expanding on many of the advantages of traditional ATRP, O-ATRP allows well-defined polymers to be produced under mild reaction conditions using organic photoredox catalysts. As a result, O-ATRP has opened access to a range of sensitive applications where the use of a metal catalyst could be of concern, such as electronics, certain biological applications, and the polymerization of coordinating monomers. However, key limitations of this method remain and necessitate further investigation to continue the development of this field. As such, this review details the achievements made to-date as well as future research directions that will continue to expand the capabilities and application landscape of O-ATRP.

End-functionalized polymers by controlled/living radical polymerizations: synthesis and applications

This review focuses on end-functionalized polymers synthesized by controlled/living radical polymerizations and the applications in fields including bioconjugate formation, surface modification, topology construction, and self-assembly.

Extended phenothiazines: synthesis, photophysical and redox properties, and efficient photocatalytic oxidative coupling of amines

Herein, we successfully developed a ring-fusion approach to extend the conjugation length of phenothiazines that were demonstrated to be efficient photocatalysts for visible-light-driven oxidative coupling reactions of amines under an air atmosphere.

Photoredox-Catalyzed Reduction of Halogenated Arenes in Water by Amphiphilic Polymeric Nanoparticles

The use of organic photoredox catalysts provides new ways to perform metal-free reactions controlled by light. While these reactions are usually performed in organic media, the application of these catalysts at ambient temperatures in aqueous media is of considerable interest. We here compare the activity of two established organic photoredox catalysts, one based on 10-phenylphenothiazine (PTH) and one based on an acridinium dye (ACR), in the light-activated dehalogenation of aromatic halides in pure water. Both PTH and ACR were covalently attached to amphiphilic polymers that are designed to form polymeric nanoparticles with hydrodynamic diameter DH ranging between 5 and 11 nm in aqueous solution. Due to the hydrophobic side groups that furnish the interior of these nanoparticles after hydrophobic collapse, water-insoluble reagents can gather within the nanoparticles at high local catalyst and substrate concentrations. We evaluated six different amphiphilic polymeric nanoparticles to assess the effect of polymer length, catalyst loading and nature of the catalyst (PTH or ACR) in the dechlorination of a range of aromatic chlorides. In addition, we investigate the selectivity of both catalysts for reducing different types of aryl-halogen bonds present in one molecule, as well as the activity of the catalysts for C-C cross-coupling reactions. We find that all polymer-based catalysts show high activity for the reduction of electron-poor aromatic compounds. For electron-rich compounds, the ACR-based catalyst is more effective than PTH. In the selective dehalogenation reactions, the order of bond stability is C-Cl > C-Br > C-I irrespective of the catalyst applied. All in all, both water-compatible systems show good activity in water, with ACR-based catalysts being slightly more efficient for more resilient substrates.

Synthesis of Poly(ionic Liquid)s-block-poly(methyl Methacrylate) Copolymer-Grafted Silica Particle Brushes with Enhanced CO2 Permeability and Mechanical Performance

Poly(ionic liquid) (PIL)-based block copolymers are of particular interest as they combine the specific properties of PILs with the self-assembling behaviors of block copolymers, broadening the range of potential applications for PIL-based materials. In this work, three particle brushes: SiO₂-g-poly(methyl methacrylate) (PMMA), SiO₂-g-PIL, and SiO₂-g-PMMA-b-PIL were prepared through surface-initiated atom transfer radical polymerization. Unlike the homogeneous homopolymer particle brushes, the block copolymer particle brush SiO₂-g-PMMA-b-PIL exhibited a bimodal chain architecture and unique phase-separated morphology, which were confirmed by size-exclusion chromatography and transmission electron microscopy. In addition, the influence of the introduction of the PMMA segment on the gas separation and mechanical performance of the PIL-containing block copolymer particle brushes were investigated. A significant improvement of Young's modulus was observed in the SiO₂-g-PMMA-b-PIL compared to the SiO₂-g-PIL bulk films; meanwhile, their gas separation performances (CO₂ permeability and CO₂/N₂ selectivity) were the same, which demonstrates the possibility of improving the mechanical properties of PIL-based particle brushes without compromising their gas separation performance.

Light-Mediated Polymerization Induced by Semiconducting Nanomaterials: State-of-the-Art and Future Perspectives

Direct capture of solar energy for chemical transformation via photocatalysis proves to be a cost-effective and energy-saving approach to construct organic compounds. With the recent growth in photosynthesis, photopolymerization has been established as a robust strategy for the production of specialty polymers with complex structures, precise molecular weight, and narrow dispersity. A key challenge in photopolymerization is the scarcity of effective photomediators (photoinitiators, photocatalysts, etc.) that can provide polymerization with high yield and well-defined polymer products. Current efforts on developing photomediators have mainly focused on organic dyes and metal complexes. On the other hand, nanomaterials (NMs), particularly semiconducting nanomaterials (SNMs), are suitable candidates for photochemical reactions due to their unique optical and electrical properties, such as high absorption coefficients, large charge diffusion lengths, and broad absorption spectra. This review provides a comprehensive insight into SNMs' photomediated polymerizations and highlights the roles SNMs play in photopolymerizations, types of polymerizations, applications in producing advanced materials, and the future directions.

Preparation of Patterned and Multilayer Thin Films for Organic Electronics via Oxygen-Tolerant SI-PET-RAFT

An oxygen-tolerant approach is described for preparing surface-tethered polymer films of organic semiconductors directly from electrode substrates using polymer brush photolithography. A photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) approach was used to prepare multiblock polymer architectures with the structures of multi-layer organic light-emitting diodes (OLEDs), including electron-transport, emissive, and hole-transport layers. The preparation of thermally activated delayed fluorescence (TADF) and thermally assisted fluorescence (TAF) trilayer OLED architectures are described. By using direct photomasking as well as a digital micromirror device, we also show that the surface-initiated (SI)-PET-RAFT approach allows for enhanced control over layer thickness, and spatial resolution in polymer brush patterning at low cost.

Metal-Free Organocatalyzed Atom Transfer Radical Polymerization: Synthesis, Applications, and Future Perspectives

Reversible deactivation radical polymerization (RDRP) is a class of powerful techniques capable of synthesizing polymers with a well-defined structure, properties, and functionalities. Among the available RDRPs, ATRP is the most investigated. However, the necessity of a metal catalyst represents a drawback and limits its use for some applications. O-ATRP emerged as an alternative to traditional ATRP that uses organic compounds that catalyze polymerization under light irradiation instead of metal. The friendly nature and the robustness of O-ATRP allow its use in the synthesis of tailorable advanced materials with unique properties. In this review, the fundamental aspects of the reductive and oxidative quenching mechanism of O-ATRP are provided, as well as insights into each component and its role in the reaction. Besides, the breakthrough recent studies that applied O-ATRP for the synthesis of functional materials are presented, which illustrate the significant potential and impact of this technique across diverse fields.

Ultrastable Glassy Polymer Films with an Ultradense Brush Morphology

Glassy polymer films with extreme stability could enable major advancements in a range of fields that require the use of polymers in confined environments. Yet, from a materials design perspective, we now know that the glass transition temperature (T_g) and thermal expansion of polymer thin films can be dramatically different from those characteristics of the bulk, i.e., exhibiting confinement-induced diminished thermal stability. Here, we demonstrate that polymer brushes with an ultrahigh grafting density, i.e., an ultradense brush morphology, exhibit a significant enhancement in thermal stability, as manifested by an exceptionally high T_g and low expansivity. For instance, a 5 nm thick polystyrene brush film exhibits an ∼75 K increase in T_g and ∼90% reduction in expansivity compared to a spin-cast film of similar thickness. Our results establish how morphology can overcome confinement and interfacial effects in controlling thin-film material properties and how this can be achieved by the dense packing and molecular ordering in the amorphous state of ultradense brushes prepared by surface-initiated atom transfer radical polymerization in combination with a self-assembled monolayer of initiators.

Enhancing the efficiency of semiconducting quantum dot photocatalyzed atom transfer radical polymerization by ligand shell engineering

Manipulating the ligand shell of semiconducting quantum dots (QDs) has proven to be a promising strategy to enhance their photocatalytic performance for small molecule transformations, such as H₂ evolution and CO₂ reduction. However, ligand-controlled catalysis for macromolecules, which differ from small molecules in penetrability and charge transfer behavior due to their bulky sizes, still remains undiscovered. Here, we systematically investigate the role of surface ligands in the photocatalytic performance of cadmium selenide (CdSe) QDs in light-induced atom transfer radical polymerization (ATRP) by using thiol-based ligands with various polarities and chain lengths. A highly enhanced polymerization efficiency was observed when 3-mercapto propionic acid (MPA), a short-chain and polar ligand, was used to modify the CdSe QDs' surface, achieving high chain-end fidelity, good temporal control, and a dispersity of 1.18, while also tolerating a wide-range of functional monomers ranging from acrylates to methacrylates and fluorinated monomers. Transient absorption spectroscopy and time-resolved photoluminescence studies reveal interesting mechanistic details of electron and hole transfers from the excited QDs to the initiators and 3-MPA capping ligands, respectively, providing key mechanistic insight of these ligand controlled and QD photocatalyzed ATRP processes. The thiolate ligands were found to serve as an efficient hole acceptor for QDs, which facilitates the formation of a charge-separated state, followed by electron transfer from the conduction band edge to initiators and ultimately suppressing charge recombination within the QD.

Recent advancements in the development of molecular organic photocatalysts

Research in the development of molecular organic photocatalysts for applications in chemical syntheses has burgeoned in recent years. While organic photosensitizers have been known for over a century, tuning the properties of these molecules to increase photocatalytic efficiencies is now of growing importance. The properties that help improve the performance of organic photocatalysts include: a wider range of redox potentials, increased molar absorptivity (ε) in the visible spectrum, increased quantum yields (Φ), long-lived excited-state lifetimes (ns to μs), and increased chemical stability. This review examines some of the recent advancements in the development of molecular organic photocatalysts, specifically cyanoarenes, acridinium dyes, phenazines, thiazines, oxazines, and xanthenes, with respect to these properties and examines the chemical synthesis routes now achieved by organic photocatalysts.

Self-Cleaning Cotton Obtained after Grafting Thermoresponsive Poly(N-vinylcaprolactam) through Surface-Initiated Atom Transfer Radical Polymerization

Although the performance of smart textiles would be enhanced if they could display self-cleaning ability toward various kinds of contamination, the procedures that have been used previously to impart the self-cleaning potential to these functional fabrics (solvent casting, dip coating, spin coating, surface crosslinking) have typically been expensive and/or limited by uncontrollable polymer thicknesses and morphologies. In this paper, we demonstrate the use of atomic transfer radical polymerization for the surface-initiated grafting of poly(N-vinylcaprolactam), a thermoresponsive polymer, onto cotton. We confirmed the thermoresponsiveness and reusability of the resulting fabric through water contact angle measurements and various surface characterization techniques (scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy). Finally, we validated the self-cleaning performance of the fabric by washing away an immobilized fluorescent protein in deionized water under thermal stimulus. Fluorescence micrographs revealed that, after the fifth wash cycle, the fabric surface had undergone efficient self-cleaning of the stain, making it an effective self-cleaning material. This approach appears to have potential for application in the fields of smart textiles, responsive substrates, and functional fabrics.

In-situ syntheses of graft copolymers by metal-free strategies: combination of photoATRP and ROP

A completely metal-free and environmentally friendly strategy is demonstrated for the preparation of graft copolymers by combining photoinduced Atom Transfer Radical Polymerization (ATRP) and Ring Opening Polymerization (ROP). Polymerizations are simultaneously realized in a one-pot manner. For this purpose, bare vinyl monomers, vinyl monomers with hydroxyl functional groups, and lactone monomers were simultaneously polymerized under visible light using specific catalysts. While vinyl monomers construct the main chain, the lactone monomers were polymerized from the hydroxyl functions present at the side chain. Spectral and chromatographic analyses prove that the utilized strategy is successful in the preparation of graft copolymers controlled molecular weights and narrow distributions.

Amphiphilic Polymeric Nanoparticles for Photoredox Catalysis in Water

Photoredox catalysis has recently emerged as a powerful synthesis tool in organic and polymer chemistry. In contrast to the great achievements realized in organic solvents, performing photocatalytic processes efficiently in aqueous media encounters several challenges. Here, it is presented how amphiphilic single-chain polymeric nanoparticles (SCPNs) can be utilized as small reactors to conduct light-driven chemical reactions in water. By incorporating a phenothiazine (PTH) catalyst into the polymeric scaffold, metal-free reduction and C-C cross-coupling reactions can be carried out upon exposure to UV light under ambient conditions. The versatility of this approach is underlined by a large substrate scope, tolerance towards oxygen, and excellent recyclability. This approach thereby contributes to a sustainable and green way of implementing photoredox catalysis.

Surface-grafted polyacrylonitrile brushes with aggregation-induced emission properties

Polyacrylonitrile (PAN) brushes were grafted from silicon wafers by photoinduced ATRP and shown to exhibit aggregation-induced emission (AIE) properties.

PET-RAFT polymerization catalyzed by cadmium selenide quantum dots (QDs): Grafting-from QDs photocatalysts to make polymer nanocomposites

We report herein the first example of light-controlled radical reversible addition–fragmentation chain transfer polymerization facilitated by cadmium selenide quantum dots and the grafting-from CdSe QDs to create polymer-QDs nanocomposites.

Organocatalytic C–H fluoroalkylation of commodity polymers

Organocatalytic post-polymerization modification of commodity aromatic polymers diversifies their material properties.

PH-Sensitive, Polymer Functionalized, Nonporous Silica Nanoparticles for Quercetin Controlled Release

Some pH-sensitive, poly(2-(diethylamino)ethyl methacrylate) (PDEAEMA) grafted silica nanoparticles (SNPs) (SNPs-g-PDEAEMA) were designed and synthesized via surface initiated, metal-free, photoinduced atom transfer radical polymerization (ATRP). The structures of the polymers formed in solution were determined by 1H NMR. The modified nanoparticles were characterized by FT-IR spectroscopy, XPS, GPC, TEM and TGA. The analytical results show that α-bromoisobutyryl bromide (BIBB) (ATRP initiator) had been successfully anchored onto SNPs' surfaces, and was followed by surface-initiated, metal-free ATRP of 2-(diethylamino)ethyl methacrylate (DEAEMA). The resultant SNPs-g-PDEAEMA were uniform spherical nanoparticles with the particles size of about 22-25 nm, and the graft density of PDEAEMA on SNPs' surfaces obtained by TGA was 19.98 μmol/m2. Owing to the covalent grafting of pH-sensitive PDEAEMA, SNPs-g-PDEAEMA can dispersed well in acidic aqueous solution, but poorly in neutral and alkaline aqueous solutions, which is conducive to being employed as drug carriers to construct a pH-sensitive controlled drug delivery system. In vitro cytotoxicity evaluation results showed that the cytotoxicity of SNPs-g-PDEAEMA to the L929 cells had completely disappeared on the 3rd day. The loading of quercetin on SNPs-g-PDEAEMA was performed using adsorption process from ethanol solutions, and the dialysis release rate increased sharply when the pH value of phosphate-buffered saline (PBS) decreased from 7.4 to 5.5. All these results indicated that the pH-responsive microcapsules could serve as potential anti-cancer drug carriers.

Photoinduced Metal-Free Surface Initiated ATRP from Hollow Spheres Surface

Well-defined amphiphilic diblock copolymer poly (methyl methacrylate)-b-poly (N-isopropylacrylamide) grafted hollow spheres (HS-g-PMMA-b-PNIPAM) hybrid materials were synthesized via metal-free surface-initiated atom transfer radical polymerization (SI-ATRP). The ATRP initiators α-Bromoisobutyryl bromide (BIBB) were attached onto hollow sphere surfaces through esterification of acyl bromide groups and hydroxyl groups. The synthetic ATRP initiators (HS-Br) were further used for the metal-free SI-ATRP of methyl methacrylate (MMA) and N-isopropyl acrylamide (NIPAM) using 10-phenylphenothiazine (PTH) as the photocatalyst. The molecular weight of the polymers, structure, morphology, and thermal stability of the hybrid materials were characterized via gel permeation chromatography (GPC), X-ray photoelectron spectroscopy (XPS), ¹H-nuclear magnetic resonance spectroscopy (¹H NMR), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA), respectively. The results indicated that the ATRP initiator had been immobilized onto HS surfaces successfully followed by metal-free SI-ATRP of MMA and NIPAM, the Br atom had located at the end of the main PMMA polymer chain, and the polymerization process possessed the characteristic of controlled/"living" polymerization. The thermal stability of the hybrid materials was increased significantly compared to the pure PMMA and PNIPAM.

The Counterion Effect of Imidazolium-Type Poly(ionic liquid) Brushes on Carbon Dioxide Adsorption

Imidazolium-based poly(ionic liquid) brushes were attached to spherical silica nanoparticles bearing various functionalities by using a surface-initiated atom transfer radical polymerization ("grafting from" technique). A temperature-programmed desorption process was applied to evaluate and analyze the carbon dioxide adsorption performance of the synthesized polymer brushes. The confined structure of the surface-attached polymer chains facilitates gas transport and adsorption, leading to an enhanced adsorption capacity of carbon dioxide molecules compared with pure polymer powders. Temperature-programmed desorption profiles of the synthesized polymer brushes after carbon dioxide adsorption reveal that the substituent groups on the nitrogen atom at the 3-position of the imidazole ring, as well as the associated anions significantly affect the adsorption capacity of functionalized poly(ionic liquid) brushes. Of the tested samples, amine-functionalized poly(ionic liquid) brushes associated with hexafluorophosphate ions exhibit the highest carbon dioxide adsorption capacity of 2.56 mmol g^-1 (112.64 mg g^-1 ) at 25 °C under a carbon dioxide partial pressure of 0.2 bar.

Controlling the Surface Properties of Binary Polymer Brush-Coated Colloids via Targeted Nanoparticles

This paper explores a novel mechanism for controlling the surface properties of polymer-coated colloids using targeted ("sticky") nanoparticles which attract monomers of certain polymer species. In our study, colloids are coated by two types of tethered polymer chains having different chemical properties. Attraction of nanoparticles to the monomers of one polymer type causes these polymer chains to contract toward the grafting surface, rendering the other type more exposed to the environment. Thus, the effective surface properties of the colloid are dominated by the intended polymer type. We use coarse-grained molecular dynamics (CGMD) simulation to demonstrate that introducing nanoparticles which interact preferentially with certain types of polymers makes it possible to switch between different surface properties of the colloid. This mechanism can in principle be exploited in drug delivery systems and self-assembly applications.

Self-healing and tough GO-supported hydrogels preparedviasurface-initiated ATRP and photocatalytic modification

Hydrogels with the properties of self-healing, toughness, stiffness and strength have great potential for use in smart materials.

Acid and base catalysed reactions in one pot with site-isolated polyHIPE catalysts

The highly porous polymers with interconnected windows (polyHIPE) are functionalised with tertiary amine and carboxyl groups to form basic and Brønsted acidic heterogeneous catalysts.

ARGET ATRP of Triblock Copolymers (PMMA-b-PEO-b-PMMA) and Their Microstructure in Aqueous Solution

Triblock copolymers poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with designed molecular weight of PMMA and PEO blocks were synthesized via the activator regenerated by electron transfer (ARGET) atom transfer radical polymerization (ATRP) of MMA. The Br-terminated Br-PEO-Br with the molecular weights of 20k and 100k were used as  macroinitiators. ARGET ATRP was performed with ppm level amount CuBr2 as the catalyst and ascorbic acid as the reducing agent to overcome the sensitivity to oxygen in a traditional ATRP. The molecular weight of the PMMA block was manipulated by changing the molar ratio of monomers to the Br-PEO-Br macroinitiators. The synthesis of PMMA-b-PEO-b-PMMA and its structure was confirmed by Fourier transform infrared and 1H NMR, and the molecular weight of the PMMA block was determined by 1H NMR. Aqueous solutions of PMMA-b-PEO-b-PMMA were prepared by solvent-exchange, and their microstructures were examined by tensiometry, static light scattering, and transmission electron microscopy. The effects of molecular weight of the PMMA and PEO blocks on the microstructure were elucidated.

Iron Oxide Nanoparticles with Grafted Polymeric Analogue of Dimethyl Sulfoxide as Potential Magnetic Resonance Imaging Contrast Agents

Novel water-dispersible hybrid iron oxide nanoparticles grafted with a polymeric analogue of dimethyl sulfoxide (DMSO) were prepared. Superparamagnetic iron oxide nanoparticles with immobilized atom-transfer radical polymerization (ATRP) initiators were prepared via an in situ method using 12-(2-bromoisobutyramido)dodecanoic acid as a surface ligand/initiator. The initiator-functionalized particles were employed in a surface-initiated initiator for continuous activator regeneration ATRP to graft poly(2-(methylsulfinyl)ethyl acrylate) (a polyacrylate analogue of DMSO) from the surface. The resulting hybrid nanoparticles showed a high magnetic relaxivity ratio ( r₂/ r₁) of 600 at 7 T in fetal bovine serum, and a good biocompatibility up to 1000 mg L^-1.

Design, Synthesis and Architectures of Hybrid Nanomaterials for Therapy and Diagnosis Applications

Hybrid nanomaterials based on inorganic nanoparticles and polymers are highly interesting structures since they combine synergistically the advantageous physical-chemical properties of both inorganic and polymeric components, providing superior functionality to the final material. These unique properties motivate the intensive study of these materials from a multidisciplinary view with the aim of finding novel applications in technological and biomedical fields. Choosing a specific synthetic methodology that allows for control over the surface composition and its architecture, enables not only the examination of the structure/property relationships, but, more importantly, the design of more efficient nanodevices for therapy and diagnosis in nanomedicine. The current review categorizes hybrid nanomaterials into three types of architectures: core-brush, hybrid nanogels, and core-shell. We focus on the analysis of the synthetic approaches that lead to the formation of each type of architecture. Furthermore, most recent advances in therapy and diagnosis applications and some inherent challenges of these materials are herein reviewed.