Fe3+@polyDOPA-b-polysarcosine, a T1-Weighted MRI Contrast Agent via Controlled NTA Polymerization

Effects of Secondary Structures and pH on the Self-Assembly of Poly(ethylene glycol)-b-polytyrosine

Different from conventional synthetic polymers, polypeptides exhibit a distinguishing characteristic of adopting specific secondary structures, including random coils, α-helixes, and β-sheets. The conformation determines the rigidity and solubility of polypeptide chains, which further direct the self-assembly and morphology of the nanostructures. We studied the effect of distinct secondary structures on the self-assembly behavior of polytyrosine (PTyr)-derived amphiphilic copolymers. Two block copolymers of enantiopure poly(ethylene glycol)-b-poly(l-tyrosine) (PEG-b-P(l-Tyr)) and racemic poly(ethylene glycol)-b-poly(dl-tyrosine) (PEG-b-P(dl-Tyr)) were synthesized through the ring-opening polymerization of l-tyrosine N-thiocarboxyanhydride (l-Tyr-NTA) and dl-tyrosine N-thiocarboxyanhydride (dl-Tyr-NTA), respectively, by using poly(ethylene glycol) amine as the initiator. PEG44-b-P(l-Tyr)10 adopts a β-sheet conformation and self-assembles into rectangular nanosheets in aqueous solutions, while PEG44-b-P(dl-Tyr)9 is primarily in a random coil conformation with a tiny content of β-sheet structures, which self-assembles into sheaf-like nanofibrils. A pH increase results in the ionization of phenolic hydroxyl groups, which decreases the β-sheet content and increases the random coil content of the PTyr segments. Accordingly, PEG44-b-P(l-Tyr)10 and PEG44-b-P(dl-Tyr)9 self-assemble to form slender nanobelts and twisted nanoribbons, respectively, in alkaline aqueous solutions. The secondary structure-driven self-assembly of PTyr-derived copolymers is promising to construct filamentous nanostructures, which have potential for applications in controlled drug release.

Catalase catalyzed tannic acid-Fe3+ network coating: A theranostic strategy for intestinal barrier restoration

Epithelial barrier impairment of intestinal inflammation leads to the leakage of bacteria, antigens and consequent persistent immune imbalance. Restoring the barrier function holds promise for management of intestinal inflammation, while the theragnostic strategies are limited. In this study, we developed a novel coating by catalase (CAT)-catalyzed polymerization of tannic acid (TA) and combined chelation network with Fe3+. TA-Fe3+ coating was self-polymerized in situ along the small intestinal mucosa, demonstrating persistent adhesion properties and protective function. In enteritis models, sequential administration of TA-Fe3+ complex solution effectively restored the barrier function and alleviated the intestinal inflammation. Overexpressed CAT in inflammatory lesion is more favorable for the in situ targeting growth of TA-Fe3+ coating onto the defective barrier. Based on the high longitudinal relaxivity of Fe3+, the pathologically catalyzed coating facilitated the visualization of intestinal barrier impairment through MRI. In conclusion, the novel TA-Fe3+ delivery coating proposed an alternative approach to promote theranostic intervention for intestinal diseases.

Naturally biocompatible melanin based iron-complex nanoparticles for pH-responsive magnetic resonance imaging

The sensitivity and diagnostic accuracy of magnetic resonance imaging mainly depend on the relaxation capacity of contrast agents (CAs) and their accumulated amount at the pathological region. Due to the better biocompatibility and high-spin capacity, Fe-complexes have been studied widely as an alternative to replace popular Gd-based CAs associated with potential biotoxicity. Compared with a variety of Fe complex-based CAs, such as small molecular, macrocyclic, multinuclear complexes, the form of nanoparticle exhibits outstanding longitudinal relaxation, but the clinical transformation was still limited by the inconspicuous difference of contrast between tumor and normal tissue. The enhanced effect of contrast is a positive relation as relaxation of CAs and their concentration in desired region. To specifically improve the amount of CAs accumulated in the tumor, pH-responsive polymer poly(2-ethyl-2-oxazoline) (PEOz) was modified on melanin, a ubiquitous natural pigment providing much active sites for chelating with Fe(III). The Fe(III)-Mel-PEOz we prepared could raise the tumor cell endocytosis efficiency via switching surface charge from anion to cation with the stimuli of the decreasing pH of tumor microenvironment. The change of pH has negligible effect on ther1of Fe(III)-Mel-PEOz, which is always maintained at around 1.0 mM-1s-1at 0.5 T. Moreover, Fe(III)-Mel-PEOz exhibited low cytotoxicity, and satisfactory enhancement of positive contrast effectin vivo. The excellent biocompatibility and stable relaxation demonstrate the high potential of Fe(III)-Mel-PEOz in the diagnosis of tumor.

Recent progress on polySarcosine as an alternative to PEGylation: Synthesis and biomedical applications

Biotherapeutic PEGylation to prolong action of medications has gained popularity over the last decades. Various hydrophilic natural polymers have been developed to tackle the drawbacks of PEGylation, such as its accelerated blood clearance and non-biodegradability. Polypeptoides, such as polysarcosine (pSar), have been explored as hydrophilic substitutes for PEG. pSar has PEG-like physicochemical characteristics such as water solubility and no reported cytotoxicity and immunogenicity. This review discusses pSar derivatives, synthesis, characterization approaches, biomedical applications, in addition to the challenges and future perspectives of pSar based biomaterials as an alternative to PEG.

X-ray-Sensitive Doped CaF2-Based MRI Contrast Agents for Local Radiation Dose Measurement

Ionizing radiation has become widely used in medicine, with application in diagnostic techniques, such as computed tomography (CT) and radiation therapy (RT), where X-rays are used to diagnose and treat tumors. The X-rays used in CT and, in particular, in RT can have harmful side effects; hence, an accurate determination of the delivered radiation dose is of utmost importance to minimize any damage to healthy tissues. For this, medical specialists mostly rely on theoretical predictions of the delivered dose or external measurements of the dose. To extend the practical use of ionizing radiation-based medical techniques, such as magnetic resonance imaging (MRI)-guided RT, a more precise measurement of the internal radiation dose internally is required. In this work, a novel approach is presented to measure dose in liquids for potential future in vivo applications. The strategy relies on MRI contrast agents (CAs) that provide a dose-sensitive signal. The demonstrated materials are (citrate-capped) CaF2 nanoparticles (NPs) doped with Eu3+ or Fe2+/Fe3+ ions. Free electrons generated by ionizing radiation allow the reduction of Eu3+, which produces a very small contrast in MRI, to Eu2+, which induces a strong contrast. Oxidative species generated by high-energy X-rays can be measured indirectly using Fe2+ because it oxidizes to Fe3+, increasing the contrast in MRI. Notably, in the results, a strong increase in the proton relaxation rates is observed for the Eu3+-doped NPs at 40 kV. At 6 MV, a significant increase in proton relaxation rates is observed using CaF2 NPs doped with Fe2+/Fe3+ after irradiation. The presented concept shows great promise for use in the clinic to measure in vivo local ionizing radiation dose, as these CAs can be intravenously injected in a saline solution.

Precision Synthesis of Polysarcosine via Controlled Ring-Opening Polymerization of N-Carboxyanhydride: Fast Kinetics, Ultrahigh Molecular Weight, and Mechanistic Insights

The rapid and controlled synthesis of high-molecular-weight (HMW) polysarcosine (pSar), a potential polyethylene glycol (PEG) alternative, via the ring-opening polymerization (ROP) of N-carboxyanhydride (NCA) is rare and challenging. Here, we report the well-controlled ROP of sarcosine NCA (Sar-NCA) that is catalyzed by various carboxylic acids, which accelerate the polymerization rate up to 50 times, and enables the robust synthesis of pSar with an unprecedented ultrahigh molecular weight (UHMW) up to 586 kDa (DP ∼ 8200) and exceptionally narrow dispersity (D̵) below 1.05. Mechanistic experiments and density functional theory calculations together elucidate the role of carboxylic acid as a bifunctional catalyst that significantly facilitates proton transfer processes and avoids charge separation and suggest the ring opening of NCA, rather than decarboxylation, as the rate-determining step. UHMW pSar demonstrates improved thermal and mechanical properties over the low-molecular-weight counterparts. This work provides a simple yet highly efficient approach to UHMW pSar and generates a new fundamental understanding useful not only for the ROP of Sar-NCA but also for other NCAs.

Toward Protein-Repellent Surface Coatings from Catechol-Containing Cationic Poly(2-ethyl-2-oxazoline)

Inspired by mussel proteins that enable surface binding in harsh marine environments, we envisioned a platform of protein-repellent macromolecules based on poly(2-ethyl-2-oxazoline) carrying catechol and cationic functional groups. To facilitate surface attachment, catechol units were installed by copolymerizing a functional comonomer, i.e., 2-(3,4-dimethoxyphenyl)-2-oxazoline, in a gradient fashion. Cationic units were introduced by partial acidic hydrolysis. The surface affinity of these polymers was probed using a quartz crystal microbalance with dissipation monitoring (QCM-D), and it was found that polymers with catechol units had a strong tendency to form surface-bound layers on different substrates, i.e., gold, iron, borosilicate, and polystyrene. While the neutral catechol-containing polymers showed strong, but uncontrolled binding, the ones with additional cationic units were able to form defined and durable polymer films. These coatings were able to prevent the attachment of different model proteins, i.e., bovine serum albumin (BSA), fibrinogen (FI), or lysozyme (LYZ). The herein-introduced platform offers straightforward access to nonfouling surface coatings using a biomimetic approach.

High spin Fe(III)-doped nanostructures as T1 MR imaging probes

Magnetic Resonance Imaging (MRI) T₁ contrast agents based on Fe(III) as an alternative to Gd-based compounds have been under intense scrutiny in the last 6-8 years and a number of nanostructures have been designed and proposed for in vivo diagnostic and theranostic applications. Excluding the large family of superparamagnetic iron oxides widely used as T₂ -MR imaging agents that will not be covered by this review, a considerable number and type of nanoparticles (NPs) have been employed, ranging from amphiphilic polymer-based NPs, NPs containing polyphenolic binding units such as melanin-like or polycatechols, mixed metals such as Fe/Gd or Fe/Au NPs and perfluorocarbon nanoemulsions. Iron(III) exhibits several favorable magnetic properties, high biocompatibility and improved toxicity profile that place it as the paramagnetic ion of choice for the next generation of nanosized MRI and theranostic contrast agents. An analysis of the examples reported in the last decade will show the opportunities for relaxivity and MR-contrast enhancement optimization that could bring Fe(III)-doped NPs to really compete with Gd(III)-based nanosystems. This article is categorized under: Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Diagnostic Tools > Diagnostic Nanodevices Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

A Review on the Synthesis of Polypeptoids

Polyeptoids are a promising class of polypeptide mimetic biopolymers based on N-substituted glycine backbones. Because of the high designability of their side chains, polypeptoids have a wide range of applications in surface antifouling, biosensing, drug delivery, and stimuli-responsive materials. To better control the structures and properties of polypeptoids, it is necessary to understand different methods for polypeptoid synthesis. This review paper summarized and discussed the main synthesis methods of polypeptoids: the solid-phase submonomer synthesis method, ring-opening polymerization method and Ugi reaction method.

Research Progress in Polypeptoids Prepared by Controlled Ring-Opening Polymerizations

Polypeptoids, structural mimics of polypeptides, have attracted considerable attention due to their biocompatibility, proteolytic stability, thermal processability, good solubility, synthetic accessibility, and structural diversity. Polypeptoids have emerged as an interesting material in both polymer science and biological field. This review primarily discusses the research progress of polypeptoids prepared by controlled ring-opening polymerizations in the past decade, including synthetic strategies of monomers, polymerizations by different initiators, postfunctionalization, fundamental properties, crystallization-driven self-assembly, and potential biological applications.

Fe3+@PDOPA‑b‑PSar Nanoparticles for Magnetic Resonance Imaging and Cancer Chemotherapy

Purpose

Chemotherapy treatments for cancer are always accompanied by a low concentration of drug delivered in the tumor area and severe side effects including systemic toxicity. Improving the concentration, biocompatibility, and biodegradability of regional chemotherapy drugs is a pressing challenge in the field of materials.

Methods

N-Phenyloxycarbonyl-amino acids (NPCs) which exhibit significant tolerance to nucleophiles, such as water and hydroxyl-containing compounds, are promising monomers for the synthesis of polypeptides and polypeptoids. Cell line and mouse models were used to comprehensively explore how to enhance the tumor MRI signal and evaluate the therapeutic effect of Fe@POS-DOX nanoparticles.

Results

In this study, poly(3,4-dihydroxy-_L-phenylalanine)-b-polysarcosine (PDOPA-b-PSar, simplified as POS) was synthesized by the block copolymerization of DOPA-NPC with Sar-NPC. Fe@POS-DOX nanoparticles were prepared in order to utilize the strong chelation of catechol ligands to iron (III) cations and the hydrophobic interaction between DOX and DOPA block to deliver chemotherapeutics to tumor tissue. The Fe@POS-DOX nanoparticles exhibit high longitudinal relaxivity (r ₁ = 7.06 mM^-1·s^-1) and act as T ₁-weighted magnetic resonance (MR) imaging contrast agents. Further, the main focus was improving tumor site-specific bioavailability and achieving therapeutic effects through the biocompatibility and biodegradability of Fe@POS-DOX NPs. The Fe@POS-DOX treatment exhibited excellent antitumor effects.

Conclusion

Upon intravenous injection, Fe@POS-DOX delivers DOX specifically to the tumor tissues, as revealed by MR, and leads to the inhibition of tumor growth without overt toxicity to normal tissues, thus displaying considerable potential for use in clinical applications.

Syntheses of Polypeptides and Their Biomedical Application for Anti-Tumor Drug Delivery

Polypeptides have attracted considerable attention in recent decades due to their inherent biodegradability and biocompatibility. This mini-review focuses on various ways to synthesize polypeptides, as well as on their biomedical applications as anti-tumor drug carriers over the past five years. Various approaches to preparing polypeptides are summarized, including solid phase peptide synthesis, recombinant DNA techniques, and the polymerization of activated amino acid monomers. More details on the polymerization of specifically activated amino acid monomers, such as amino acid N-carboxyanhydrides (NCAs), amino acid N-thiocarboxyanhydrides (NTAs), and N-phenoxycarbonyl amino acids (NPCs), are introduced. Some stimuli-responsive polypeptide-based drug delivery systems that can undergo different transitions, including stability, surface, and size transition, to realize a better anti-tumor effect, are elaborated upon. Finally, the challenges and opportunities in this field are briefly discussed.

A CORM loaded nanoplatform for single NIR light-activated bioimaging, gas therapy, and photothermal therapy in vitro

Carbon monoxide (CO) can cause mitochondrial dysfunction, inducing apoptosis of cancer cells, which sheds light on a potential alternative for cancer treatment. However, the existing CO-based compounds are inherently limited by their chemical nature, such as high biological toxicity and uncontrolled CO release. Therefore, a nanoplatform - UmPF - that addresses such pain points is urgently in demand. In this study, we have proposed a nanoplatform irradiated by near-infrared (NIR) light to release CO. Iron pentacarbonyl (Fe(CO)₅) was loaded in the mesoporous polydopamine layer that was coated on rare-earth upconverting nanoparticles (UCNPs). The absorption wavelength of Fe(CO)₅ overlaps with the emission bands of the UCNPs in the UV-visible light range, and therefore the emissions from the UCNPs can be used to incite Fe(CO)₅ to control the release of CO. Besides, the catechol groups, which are abundant in the polydopamine structure, serve as an ideal locating spot to chelate with Fe(CO)₅; in the meantime, the mesoporous structure of the polydopamine layer improves the loading efficiency of Fe(CO)₅ and reduces its biological toxicity. The photothermal effect (PTT) of the polydopamine layer is highly controllable by adjusting the external laser intensity, irradiation time and the thickness of the polydopamine layer. The results illustrate that the combination of CO gas therapy (GT) and polydopamine PTT brought by the final nanoplatform can be synergistic in killing cancer cells in vitro. More importantly, the possible toxic side effects can be effectively prevented from affecting the organism, since CO will not be released in this system without near-infrared light radiation.

An Inspection into Multifarious Ways to Synthesize Poly(Amino Acid)s

Poly(α-amino acid)s (PAAs) attract growing attention due to their essential role in the application as biomaterials. To synthesize PAAs with desired structures and properties, scientists have developed various synthetic techniques with respective advantages. Here, different approaches to preparing PAAs are inspected. Basic features and recent progresses of these methods are summarized, including polymerizations of amino acid N-carboxyanhydrides (NCAs), amino acid N-thiocarboxyanhydrides (NTAs), and N-phenoxycarbonyl amino acids (NPCs), as well as other synthetic routes. NCA is the most classical monomer to prepare PAAs with high molecular weights (MWs). NTA polymerizations are promising alternative pathways to produce PAAs, which can tolerate nucleophiles including alcohols, mercaptans, carboxyl acids, and water. By various techniques including choosing appropriate solvents or using organic acids as promoters, NTAs polymerize to produce polypeptoids and polypeptides with narrow dispersities and designed MWs up to 55.0 and 57.0 kg mol^-1 , respectively. NPC polymerizations are phosgene-free ways to synthesize polypeptides and polypeptoids. For the future prospects, detail investigations into polymerization mechanisms of NTA and NPC are expected. The synthesis of PAAs with designed topologies and assembly structures is another intriguing topic. The advantages and unsettled problems in various synthetic ways are discussed for readers to choose appropriate approaches for PAAs.

Ultrasmall Fe(III)-Tannic Acid Nanoparticles To Prevent Progression of Atherosclerotic Plaques

Macrophage accumulation is central to the pathogenesis of atherosclerotic plaques. Reducing macrophages in plaques is an appealing approach to attenuate the development of atherosclerosis. Chemodynamic therapy, specifically inhibiting hydrogen peroxide (H₂O₂)-rich cells in slightly acidic microenvironment, has emerged as a new method in tumor treatment. Herein, we manufactured ultrasmall dopamine-modified hyaluronic acid (HD)-stabilized Fe(III)-tannic acid nanoparticles (HFTNPs). HFTNPs can specifically accumulate in inflammatory macrophages in atherosclerotic plaques, provide brighter magnetic resonance images, promote reactive oxygen species (ROS) generation, and induce the death of inflammatory macrophages without damaging normal cells and tissues. In conclusion, HFTNPs have a tremendous potential as safe and effective diagnostic and therapeutic reagents for atherosclerosis.

Understanding Acid-Promoted Polymerization of the N-Substituted Glycine N-Thiocarboxyanhydride in Polar Solvents

Polymerization of N-substituted glycine N-thiocarboxyanhydrides (NNTAs) is a promising pathway to prepare functional polypeptoids benefiting from their tolerance to nucleophilic impurities. However, controlled NNTA polymerization is hard to achieve in amide polar solvents, including N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), and N-methyl pyrrolidone (NMP), the only aprotic solvents for many biomacromolecules and polypeptoids. In the present work, we successfully achieve controlled NNTA polymerization in amide polar solvents by adding acetic acid as a promoter. The promotion is applied to the polymerization of sarcosine NTA, N-ethyl glycine NTA, and N-butyl glycine NTA. DMAc, DMF, and NMP are suitable solvents to prepare polypeptoids with designable molecular weights and low dispersities (1.06-1.21). The polysarcosines with high molecular weights are prepared up to 35.2 kg/mol. A kinetic investigation quantitatively reveals that the presence of acetic acid not only accelerates the polymerization, but also suppresses H₂S-catalyzed decomposition of NNTAs by decreasing the concentration of H₂S dissolved in polar solvents. Benzoic acid is also able to promote the polymerization, while trifluoroacetic acid, phosphoric acid, and phenol are not appropriate promoters. The moderate acidity of acids is essential. l-Methionine, l-tryptophan, and l-phenylalanine, which are dissolved in DMF, initiate the controlled polymerization of sarcosine-NTA in the presence of acetic acid and introduce functional end groups to polysarcosines quantitatively. In DMAc, hydrophilic vancomycin is grafted by poly(N-butyl glycine). The amphiphilic product dissolves in dichloromethane and stabilizes water-in-oil emulsion.

Iron(iii) chelated paramagnetic polymeric nanoparticle formulation as a next-generation T1-weighted MRI contrast agent

In pursuit of safer alternatives to Gd-based MRI contrast agents due to its toxicity and organ deposition, herein, we developed a safer and efficient clinically relevant iron(iii) chelated polymeric nanoparticle as a T1-weighted MRI contrast agent.

Inspired by mussel adhesive protein: hydrophilic cationic copoly(2-oxazoline)s carrying catecholic side chains

The cationic ring-opening copolymerization of 2-ethyl-2-oxazoline and 3,4-dimethoxyaryl-substituted 2-oxazolines yields gradient or random copolymers, which can be converted into adhesive copolymers carrying catecholic and cationic groups.

Ugi Reaction of Amino Acids: From Facile Synthesis of Polypeptoids to Sequence-Defined Macromolecules

Polypeptoids have been prepared and researched for more than 20 years. However, the efficient generation of polypeptoids and sequence-defined polypeptoids faces many challenges and difficulties. The Ugi reaction of amino acids has recently been introduced into polypeptoid chemistry as a new and powerful method to furnish polypeptoids. In the following mini review, the recent progress on the application of the Ugi reaction of amino acids in polypeptoid science, including polypeptoid from sustainable furfural, sequence-defined polypeptoids, and more is summarized. Moreover, the future development of the Ugi reaction of amino acids in polypeptoid science is discussed.

Direct N-substituted N-thiocarboxyanhydride polymerization towards polypeptoids bearing unprotected carboxyl groups

Synthesis of poly(α-amino acid)s bearing carboxyl groups is a critical pathway to prepare biomaterials to simulate functional proteins. The traditional approaches call for carboxyl-protected monomers to prevent degradation of monomers or wrong linkage. In this contribution, we synthesize N-carboxypentyl glycine N-thiocarboxyanhydride (CPG-NTA) and iminodiacetic acid N-thiocarboxyanhydride (IDA-NTA) without protection. Initiated by amines, CPG-NTA directly polymerizes into polyCPG bearing unprotected carboxyl groups with controlled molecular weight (2.8-9.3 kg mol^-1) and low dispersities (1.08-1.12). Block and random copolymerizations of CPG-NTA with N-ethyl glycine N-thiocarboxyanhydride (NEG-NTA) demonstrate its versatile construction of complicated polypeptoids. On the contrary, IDA-NTA transforms amines into cyclic IDA dimer-capped species with carboxyl end group in decent yields (>89%) regio-selectively. Density functional theory calculation elucidates that IDA repeating unit is prone to cyclize to be the six-membered ring product with low ΔG. The polymer is a good adhesive reagent to various materials with adhesive strength of 33-229 kPa.

A nephrotoxicity-free, iron-based contrast agent for magnetic resonance imaging of tumors

Gadolinium-based contrast agents (GBCAs) are the most widely used T1 contrast agents for magnetic resonance imaging (MRI) and have achieved remarkable success in clinical cancer diagnosis. However, GBCAs could cause severe nephrogenic systemic fibrosis to patients with renal insufficiency. Nevertheless, GBCAs are quickly excreted from the kidneys, which shortens their imaging window and prevents long-term monitoring of the disease per injection. Herein, a nephrotoxicity-free T1 MRI contrast agent is developed by coordinating ferric iron into a telodendritic, micellar nanostructure. This new nano-enabled, iron-based contrast agent (nIBCA) not only can reduce the renal accumulation and relieve the kidney burden, but also exhibit a significantly higher tumor to noise ratio (TNR) for cancer diagnosis. In comparison with Magnevist (a clinical-used GBCA), Magnevist induces obvious nephrotoxicity while nIBCA does not, indicating that such a novel contrast agent may be applicable to renally compromised patients requiring a contrast-enhanced MRI. The nIBCA could precisely image subcutaneous brain tumors in a mouse model and the effective imaging window lasted for at least 24 h. The nIBCA also precisely highlights the intracranial brain tumor with high TNR. The nIBCA presents a potential alternative to GBCAs as it has superior biocompatibility, high TNR and effective imaging window.

The facile and additive-free synthesis of a cell-friendly iron(iii)-glutathione complex

The straightfoward creation of an unreported glutathione-stabilised iron(iii) complex is disclosed. In contrast to previous reports, glutathione was shown to coordinate and stabilise iron directly under physiological conditions in the absence of additional sulfur containing molecules, such as sodium sulfide. The complex was extensively characterised; the molecular geometry was determined as two inequivalent octahedra, approximately 2/3 of which are slightly distorted towards more tetrahedral in character, with the remaining 1/3 more regularly octahedral. The dispersion of the iron(iii)-glutathione complex in aqueous solution yielded particles of 255 ± 4 nm in diameter that enhanced the growth and proliferation of L929 fibroblast cells over 7 days, and inhibited the activity of matrix metalloproteinase-13. Consequently, the unprecedented glutathione-stabilised iron(iii) complex disclosed has potential use as a simple-to-prepare growth factor for inclusion within cell culture media, and is an excellent candidate as a therapeutic for the treatment of metalloproteinase-13-associated diseases.

Understanding ring-closing and racemization to prepare α-amino acid NCA and NTA monomers: a DFT study

Polypeptides and polypeptoids are promising materials in biomedical applications bearing α-amino acid repeating units, which are prepared from ring-opening polymerizations of α-amino acid N-carboxyanhydride (NCA) or N-thiocarboxyanydride (NTA) monomers. Detailed studies on monomer synthetic routes are essential to explore new α-amino acid NCA and NTA monomers as well as the corresponding poly(α-amino acid) materials. In this contribution, density functional theory (DFT) is applied to investigate the mechanism of the Leuchs approach including two possible pathways, precursor structure and racemization in the ring-closing reaction. According to DFT calculations, pathway 2 is preferred with lower ΔG than pathway 1, and the rate-determining step is recognized as an SN2 substitution with releasing equivalent halogenated hydrocarbon, which explains our experimental observations. Racemization results from the reaction between the NTA monomer and a strong protonic acid, which can be suppressed by low temperature and short reaction time. Racemization is inhibited by steric hindrance in those NTAs of α-amino acids containing high bulkiness at the β-carbon, such as leucine-NTA.

Poly(2-oxazoline)s Based on Phenolic Acids

A series of phenolic-acid-based 2-oxazoline monomers with methoxy-substituted phenyl and cinnamyl side chains is synthesized and polymerized in a microwave reactor at 140 °C using methyl tosylate as the initiator. The obtained poly(2-oxazoline)s are characterized by NMR spectroscopy, MALDI-TOF mass spectrometry, and size-exclusion chromatography (SEC). Kinetic studies reveal that the microwave-assisted polymerization is fast and completed within less than ≈10 min for low monomer-to-initiator ratios of ≤25. Polymers with number-average molar masses of up to 6500 g mol^-1 and low dispersity (1.2-1.3) are produced. The aryl methyl ethers are successfully cleaved with aluminum triiodide/N,N'-diisopropylcarbodiimide to give a poly(2-oxazoline) with pendent catechol groups.

Fluorine and Nitrogen Co-Doped Carbon Dot Complexation with Fe(III) as a T1 Contrast Agent for Magnetic Resonance Imaging

Commercial gadolinium-based materials have been widely used as contrast agents for magnetic resonance imaging (MRI), but the high toxicity of leaking free Gd³⁺ ions still raises biosafety concerns. Here, we develop a novel, safe, and efficient MRI contrast agent based on a stable Fe(III) complex of fluorine and nitrogen co-doped carbon dots (F,N-CDs) that was prepared from glucose and levofloxacin by a simple microwave-assisted thermal decomposition method. The obtained Fe³⁺@F,N-CD complex exhibits higher longitudinal relaxivity ( r₁ = 5.79 mM^-1·s^-1) than that of the control samples of the Fe³⁺@CD complex ( r₁ = 4.23 mM^-1 s^-1) and free Fe³⁺ ( r₁ = 1.59 mM^-1 s^-1) in aqueous solution, as assessed by a 1.5 T NMR analyzer. More importantly, the Fe³⁺@F,N-CD complex is very stable with a large coordination constant of 1.06 × 10⁷ in aqueous medium. While incubated with HeLa cells, the Fe³⁺@F,N-CD complex shows clear MR images, demonstrating that it has potential to be an excellent MRI contrast agent. Furthermore, in vivo MRI experiments indicate that the Fe³⁺@F,N-CD complex provides high-resolution MRI pictures of 4T1 tumor bearing BALB/c mice 15 min after injection and can be completely excreted 2 h after administration. No cytotoxicity was observed with F,N-CDs and Fe concentration up to 0.2 mg/mL and 0.3 mM in 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide cell proliferation assay, respectively. The possible mechanism of the enhanced MRI effect of the Fe³⁺@F,N-CD complex is therefore proposed. The extremely low toxicity, high r₁ relaxivity, strong photoluminescence, and low synthetic cost enable the Fe³⁺@F,N-CD complex to be a safe and promising T₁-weighted MRI contrast agent for clinical applications.