Synthesis of Redox-Responsive Core Cross-Linked Micelles Carrying Optically Active Helical Poly(phenyl isocyanide) Arms and Their Applications in Drug Delivery

Enhanced Antibacterial Activity of Vancomycin Loaded on Functionalized Polyketones

Today, polymeric drug delivery systems (DDS) appear as an interesting solution against bacterial resistance, having great advantages such as low toxicity, biocompatibility, and biodegradability. In this work, two polyketones (PK) have been post-functionalized with sodium taurinate (PKT) or potassium sulfanilate (PKSK) and employed as carriers for Vancomycin against bacterial infections. Modified PKs were easily prepared by the Paal-Knorr reaction and loaded with Vancomycin at a variable pH. All polymers were characterized by FT-IR, DSC, TGA, SEM, and elemental analysis. Antimicrobial activity was tested against Gram-positive Staphylococcus aureus ATCC 25923 and correlated to the different pHs used for its loading (between 2.3 and 8.8). In particular, the minimum inhibitory concentrations achieved with PKT and PKSK loaded with Vancomycin were similar, at 0.23 μg/mL and 0.24 μg/mL, respectively, i.e., six times lower than that with Vancomycin alone. The use of post-functionalized aliphatic polyketones has thus been demonstrated to be a promising way to obtain very efficient polymeric DDS.

Droplet-based microfluidic synthesis of nanogels for controlled drug delivery: tailoring nanomaterial properties via pneumatically actuated flow-focusing junction

Conventional batch syntheses of polymer-based nanoparticles show considerable shortcomings in terms of scarce control over nanomaterials morphology and limited lot-to-lot reproducibility. Droplet-based microfluidics represents a valuable strategy to overcome these constraints, exploiting the formation of nanoparticles within discrete microdroplets. In this work, we synthesized nanogels (NGs) composed of hyaluronic acid and polyethyleneimine using a microfluidic flow-focusing device endowed with a pressure-driven micro-actuator. The actuator achieves real-time modulation of the junction orifice width, thereby regulating the microdroplet diameter and, as a result, the NG size. Acting on process parameters, NG hydrodynamic diameter could be tuned in the range 92-190 nm while preserving an extremely low polydispersity (0.015); those values are hardly achievable in batch syntheses and underline the strength of our toolbox for the continuous in-flow synthesis of nanocarriers. Furthermore, NGs were validated in vitro as a drug delivery system in a representative case study still lacking an effective therapeutic treatment: ovarian cancer. Using doxorubicin as a chemotherapeutic agent, we show that NG-mediated release of the drug results in an enhanced antiblastic effect vs. the non-encapsulated administration route even at sublethal dosages, highlighting the wide applicability of our microfluidics-enabled nanomaterials in healthcare scenarios.

Bottlebrush Polymers Based on RAFT and the "C1" Polymerization Method: Controlled Synthesis and Application in Anticancer Drug Delivery

In this work, we reported a strategy to synthesize well-defined bottlebrush polymers. Diazoacetate macromonomers of polystyrene (1-PS_n) with controlled molecular weights were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The diazo can tolerate the RAFT polymerization conditions and remained on the chain end of the yielded PS macromonomer. The terminal diazo groups of the macromonomer were polymerized by the allyl PdCl/L catalyst to afford well-defined bottlebrush polymers ((1-PS_n)_ms) carrying a side chain on each backbone atom. Meanwhile, an amphiphilic bottlebrush polymer containing brush-shaped PS and polyethylene glycol (PEG) was synthesized by polymerization of the diazoacetate macromonomer of PEG (2-PEG) using Pd(II)-terminated (1-PS_n)_m as the macroinitiator. The yielded amphiphilic (1-PS₃₀)₅₀-b-(2-PEG)₁₀₀ could self assemble into a well-defined core-shell micelle in aqueous solutions. The hydrodynamic diameter of the micelle was ca. 146 nm and had good biocompatibility. These results indicate the micelles have great potential in drug delivery.

Optically active porous hybrid particles constructed by alkynylated cellulose nanocrystals, helical substituted polyacetylene, and inorganic silica for enantio-differentiating towards naproxen

This article reports on a novel type of ternary chiral porous hybrid particles (TCPHPs) constructed by alkynylated cellulose nanocrystals (A-CNCs), helical substituted polyacetylene, and inorganic silica. The resulting TCPHPs combine the respective advantages of the three components. A-CNCs serve as stabilizer, co-monomer, and chiral source simultaneously and transfer their chirality to the resulting helical substituted polyacetylenes in the course of copolymerization with achiral acetylenic monomer following "sergeants and soldiers rule". Helical substituted polyacetylenes form chiral helical structures and thus endow TCPHPs with the anticipated optical activity. Inorganic silica constitutes the rigid framework and is covalently bonded with the organic components through hydrolysis of Si-O-Et groups. Phase separation between the organic and inorganic components renders TCPHPs with abundant pores. Scanning electron microscope (SEM) images confirm the formation of spherical particles with porous structures. Circular dichroism spectra demonstrate the optical activity of the chiral hybrid particles. The as-prepared TCPHPs exhibit capacity for enantio-differentiating performance towards chiral naproxen.

Alkyne-Palladium(II)-Catalyzed Living Polymerization of Isocyanides: An Exploration of Diverse Structures and Functions

Inspired by the perfect helical structures and the resulting exquisite functions of biomacromolecules, helical polymers have attracted increasing attention in recent years. Polyisocyanide is well known for its distinctive rodlike helical structure and various applications in chiral recognition, enantiomer separation, circularly polarized luminescence, liquid crystallization, and other fields. Although various methods and catalysts for isocyanide polymerization have been reported, the precise synthesis of helical polyisocyanides with controlled molecular weight, low dispersity, and high tacticity remains a formidable challenge. Owing to a limited synthesis strategy, the controlled synthesis of topological polyisocyanides has barely been realized. This Accounts highlights our recent endeavors to explore novel catalysts for the living polymerization of isocyanides. Fortunately, we discovered that alkyne-Pd(II) catalysts could initiate the living polymerization of isocyanides, resulting in helical polyisocyanides with controlled structures, high tacticity, and tunable compositions. These catalysts are applicable to various isocyanide monomers, including alkyl isocyanides, aryl isocyanides, and diisocyanobenzene derivatives. Incorporating chiral bidentate phosphine ligands onto alkyne-Pd(II) complexes formed chiral Pd(II) catalysts, which promoted the asymmetric living polymerization of achiral isocyanide, yielding single left- and right-handed helices with highly optical activities.Using alkyne-Pd(II) catalysts, various topological polyisocyanides have been facilely prepared, including hybrid block copolymers, bottlebrush polymers, core cross-linked star polymers, and organic/inorganic nanoparticles. For instance, various hybrid block polyisocyanides were easily produced by coupling alkyne-Pd(II)-catalyzed living isocyanide polymerization with controlled radical polymerization and ring-opening polymerization (ROP). Combining the ring-opening metathesis polymerization (ROMP) of norbornene with Pd(II)-catalyzed isocyanide polymerization, bottlebrush polyisocyanides and core cross-linked star polymers were easily prepared. Pd(II)-catalyzed living polymerization of poly(lactic acid)s with isocyanide termini resulted in densely grafted bottlebrush polyisocyanides with closely packed side chains. Moreover, the surface-initiated living polymerization of isocyanides produced a family of polyisocyanide-grafted organic/inorganic hybrid nanoparticles using nanoparticles with alkyne-Pd(II) catalysts anchored on the surfaces. Surprisingly, the nanoparticles and star polymers with helical polyisocyanide arms performed exceptionally well in terms of chiral recognition and resolution. Incorporated organocatalysts such as proline and prolinol units onto the pendants of optically active helical polyisocyanides, a family of polymer-based chiral organocatalysts, were generated, which showed significantly improved stereoselectivity for the asymmetric Aldol reaction and Michael addition and can be easily recycled.Using a chiral alkyne-Pd(II) catalyst, single-handed helical polyisocyanides bearing naphthalene and pyrene probes were produced from achiral isocyanide monomers. These polymers showed excellent self-sorting properties as revealed using a fluorescence resonance energy transfer (FRET) investigation and were self-assembled into two-dimensional (2D) smectic nanostructures driven by both helicity and chain length. Incorporating helical poly(phenyl isocyanide) (PPI) onto semiconducting poly(3-hexylthiophene) (P3HT) induced the asymmetric assembly of the resulting P3HT-b-PPI copolymers into single-handed cylindrical micelles with controlled dimensions and tunable photoluminescence.

Tuning the Cloud-Point and Flocculation Temperature of Poly(2-(diethylamino)ethyl methacrylate)-Based Nanoparticles via a Postpolymerization Betainization Approach

The ability to tune the behavior of temperature-responsive polymers and self-assembled nanostructures has attracted significant interest in recent years, particularly in regard to their use in biotechnological applications. Herein, well-defined poly(2-(diethylamino)ethyl methacrylate) (PDEAEMA)-based core-shell particles were prepared by RAFT-mediated emulsion polymerization, which displayed a lower-critical solution temperature (LCST) phase transition in aqueous media. The tertiary amine groups of PDEAEMA units were then utilized as functional handles to modify the core-forming block chemistry via a postpolymerization betainization approach for tuning both the cloud-point temperature (T _CP) and flocculation temperature (T _CFT) of these particles. In particular, four different sulfonate salts were explored aiming to investigate the effect of the carbon chain length and the presence of hydroxyl functionalities alongside the carbon spacer on the particle's thermoresponsiveness. In all cases, it was possible to regulate both T _CP and T _CFT of these nanoparticles upon varying the degree of betainization. Although T _CP was found to be dependent on the type of betainization reagent utilized, it only significantly increased for particles betainized using sodium 3-chloro-2-hydroxy-1-propanesulfonate, while varying the aliphatic chain length of the sulfobetaine only provided limited temperature variation. In comparison, the onset of flocculation for betainized particles varied over a much broader temperature range when varying the degree of betainization with no real correlation identified between T _CFT and the sulfobetaine structure. Moreover, experimental results were shown to partially correlate to computational oligomer hydrophobicity calculations. Overall, the innovative postpolymerization betainization approach utilizing various sulfonate salts reported herein provides a straightforward methodology for modifying the thermoresponsive behavior of soft polymeric particles with potential applications in drug delivery, sensing, and oil/lubricant viscosity modification.

Fabrication of thermoresponsive magnetic micelles from amphiphilic poly(phenyl isocyanide) and Fe3O4 nanoparticles for controlled drug release and synergistic thermochemotherapy

The drug-loaded micelles self-assembled from co-poly(phenyl isocyanide), Fe₃O₄ and DOX demonstrated thermoresponsiveness and magnetic hyperthermia for synergistic thermochemotherapy.

Chain-end functionalization of living helical polyisocyanides through a Pd(ii)-mediated Sonogashira coupling reaction

Various functional helical polymers were constructed through chain-end functionalization of living helical polyisocyanides through a Pd(ii)-mediated Sonogashira coupling reaction.

Fabrication of Core Crosslinked Polymeric Micelles as Nanocarriers for Doxorubicin Delivery: Self-Assembly, In Situ Diselenide Metathesis and Redox-Responsive Drug Release

Polymeric micelles (PMs) have been used to improve the poor aqueous solubility, slow absorption and non-selective biodistribution of chemotherapeutic agents (CAs), albeit, they suffer from disassembly and premature release of payloads in the bloodstream. To alleviate the thermodynamic instability of PMs, different core crosslinking approaches were employed. Herein, we synthesized the poly(ethylene oxide)-b-poly((2-aminoethyl)diselanyl)ethyl l-aspartamide)-b-polycaprolactone (mPEG-P(LA-DSeDEA)-PCL) copolymer which self-assembled into monodispersed nanoscale, 156.57 ± 4.42 nm, core crosslinked micelles (CCMs) through visible light-induced diselenide metathesis reaction between the pendant selenocystamine moieties. The CCMs demonstrated desirable doxorubicin (DOX)-loading content (7.31%) and encapsulation efficiency (42.73%). Both blank and DOX-loaded CCMs (DOX@CCMs) established appreciable colloidal stability in the presence of bovine serum albumin (BSA). The DOX@CCMs showed redox-responsive drug releasing behavior when treated with 5 and 10 mM reduced glutathione (GSH) and 0.1% H2O2. Unlike the DOX-loaded non-crosslinked micelles (DOX@NCMs) which exhibited initial burst release, DOX@CCMs demonstrated a sustained release profile in vitro where 71.7% of the encapsulated DOX was released within 72 h. In addition, the in vitro fluorescent microscope images and flow cytometry analysis confirmed the efficient cellular internalization of DOX@CCMs. The in vitro cytotoxicity test on HaCaT, MDCK, and HeLa cell lines reiterated the cytocompatibility (≥82% cell viability) of the mPEG-P(LA-DSeDEA)-PCL copolymer and DOX@CCMs selectively inhibit the viabilities of 48.85% of HeLa cells as compared to 15.75% of HaCaT and 7.85% of MDCK cells at a maximum dose of 10 µg/mL. Overall, all these appealing attributes make CCMs desirable as nanocarriers for the delivery and controlled release of DOX in tumor cells.

Self-assembly and fluorescence emission of UV-responsive azobenzene-containing helical poly(phenyl isocyanide) copolymers

UV-responsive azobenzene-containing helical copolymers were obtained, and their self-assembly and fluorescent properties were investigated.

Thermo/pH Responsive Star and Linear Copolymers Containing a Cholic Acid-Derived Monomer, N-Isopropylacrylamide and Acrylic Acid: Synthesis and Solution Properties

In this work three CTAs trithiocarbonate-type were synthesized-bifunctional (with PEG), trifunctional (with glycerol), and tetrafunctional (PERT)-and used in the controlled polymerization of 2-(acryloyloxy)ethyl cholate (CAE) via reversible addition-fragmentation chain transfer (RAFT) polymerization. The resulting macroCTAs containing a cholic acid-derived polymer were chain extended with N-isopropylacrylamide with or without acrylic acid. The thermosensitive and/or pH properties of these copolymers were studied in PBS solutions. The copolymers synthesized without poly(acrylic acid) (PAAc) were unstable above the transition temperature. Similar behavior was observed for the copolymer solutions containing PAAc (2% in feed) at lower values of pH showing a faster precipitation above the LCST. On the contrary, copolymer solutions containing PAAc showed great stability at higher pH values for a longer time period at 37 °C. Interestingly, the Dh of the aggregates ranged from 18 to 30 nm in all copolymers (with or without PAAc) below the transition temperature, although the topology and the block sequence in the chain were significantly different.

Hydrogen Bonding-Induced Assembled Structures and Photoresponsive Behavior of Azobenzene Molecule/Polyethylene Glycol Complexes

We investigated the self-assembled structures and photoresponsive and crystallization behaviors of supramolecules composed of 4-methoxy-4'-hydroxyazobenzene (Azo) molecules and polyethylene glycol (PEG) that were formed through hydrogen-bonding interactions. The Azo/PEG complexes exhibited the characteristics of photoresponse and crystallization, which originated from Azo and PEG, respectively. When Azo/PEG complexes were dissolved in solvents, hydrogen-bonding interaction hindered the rotation and inversion of mesogens, causing a reduction in the photoisomerization rate compared with the photoisomerization rate of the neat Azo. The confinement of Azo/PEG complexes in thin films further resulted in a substantial decrease in the photoisomerization rate but an increase in the amounts of H-aggregated and J-aggregated mesogens. Regarding PEG crystallization, ultraviolet irradiation of Azo/PEG complexes increased the quantity of high-polarity cis isomers, which improved the compatibility between mesogens and PEG, subsequently increasing the crystallization temperature of PEG. Moreover, the complexation of Azo and PEG induced microphase separation, forming a lamellar morphology. Within the Azo-rich microphases, mesogens aggregated to form tilted monosmectic layers. By contrast, PEG crystallization within the PEG-rich microphases was hard confined, indicating that the domain size of the lamellar morphology was unchanged during PEG crystallization.

Fabrication of redox-responsive Bi(mPEG-PLGA)-Se2 micelles for doxorubicin delivery

Stimuli-responsive polymeric nanostructures have emerged as potential drug carriers for cancer therapy. Herein, we synthesized redox-responsive diselenide bond containing amphiphilic polymer, Bi(mPEG-PLGA)-Se₂ from mPEG-PLGA and 3,3'-diselanediyldipropanoic acid (DSeDPA) using DCC/DMAP as coupling agents. Due to its amphiphilic nature, Bi(mPEG-PLGA)-Se₂ self-assembled in to stable micelles in aqueous solution with a hydrodynamic size of 123.9 ± 0.85 nm. The Bi(mPEG-PLGA)-Se₂ micelles exhibited DOX-loading content (DLC) of 6.61 wt% and encapsulation efficiency (EE) of 54.9%. The DOX-loaded Bi(mPEG-PLGA)-Se₂ micelles released 73.94% and 69.54% of their cargo within 72 h upon treatment with 6 mM GSH and 0.1% H₂O₂, respectively, at pH 7.4 and 37 °C. The MTT assay results demonstrated that Bi(mPEG-PLGA)-Se₂ was devoid of any inherent toxicity and the DOX-loaded micelles showed pronounced antitumor activities against HeLa cells, 44.46% of cells were viable at maximum dose of 7.5 µg/mL. The cellular uptake experiment further confirmed the internalization of DOX-loaded Bi(mPEG-PLGA)-Se₂ micelles and endowed redox stimuli triggered drug release in cytosol and nuclei of cancer cells. Overall, the results suggested that the smart, biocompatible Bi(mPEG-PLGA)-Se₂ copolymer could serve as potential drug delivery biomaterial for the controlled release of hydrophobic drugs in cancer cells.

Natural Thermoresponsive Rice Granules as Biocompatible Drug Carriers

Through thermal gravimetric, X-ray diffraction, infrared spectroscopy, and scanning electron microscopic analyses, here we reveal that the 4-5 μm diameter pentagonal shaped rice granules are surprisingly stable against α-amylase, trypsin, lipase, diluted acids, and diluted bases. Some papain-sensitive proteins play an important role in the granular shape stabilization. We employ the reversible thermoresponsive expansion/shrinking character in aqueous medium of this biopolymeric pentagonal granular assembly to encapsulate the antibiotic vancomycin into the granule at the drug loading content of 80% drug mass with only 20% rice granule mass. The obtained drug-loaded granules display no-burst but steady sustained release of the water-soluble vancomycin in an aqueous environment for more than 24 h.

Stimuli-Directed Colorimetric Interconversion of Helical Polymers Accompanied by a Tunable Self-Assembly Process

Interconversion between extended and bent structures at the pendant groups of a chiral polyene framework [poly(phenylacetylene) with (R)-(2-methoxy-2-phenylacetyl)glycine residues linked to 4-vinylanilines] allows the reversible colorimetric transformation from stretched to compressed helical cis-transoid polyenic structures through manipulation of the flexible spacer. This transformation generates either organogels (stretched helical form) or nanoparticles (compressed helical form) under the control of polar/low polar stimuli respectively and opens the way to the development of new sensors and stimuli-sensitive materials based on these concepts.

Chiral Self-Assembly of Nanoparticles Induced by Polymers Synthesized via Reversible Addition-Fragmentation Chain Transfer Polymerization

Chiral inorganic nanomaterials are of great interest because of their excellent optical properties. Most of the attention has been focused on the utilization of biomolecules or their derivatives as linkers or templates to control the chiral structure of assembled inorganic nanoparticles. Chiral polymers are promising synthetic materials that can be used to replace their biological counterparts. Here, by using poly(methacrylate hydroxyethyl-3-indole propionate) (PIPEMA) and poly(2-hydroxyethyl methacrylate) (PHEMA) synthesized via syndioselective reversible addition-fragmentation chain transfer polymerization, we successfully realized chiral self-assembly of gold nanorods with strong circular dichroism response in the vis-NIR region. Moreover, the intensity of the chiral signal of the assemblies can be regulated by the molecular weight of the polymers. Notably, although the monomers are achiral and no chiral reagents are involved in their synthesis, the main chains of PIPEMA and PHEMA exhibit a preferred-handed helical conformation, which is the origin of chirality of the nanorod assemblies. The preferred-handed helical conformation of polymers is attributed to their syndiotacticity and stabilized by the steric hindrance of the side groups. The addition of chiral carbon atoms at the side groups does not change the preferred-handedness of the polymer main chain, resulting in the assembled nanorod structures with the same chirality. This strategy provides inspiration for the rational design and synthesis of optically active functional synthetic polymers for the preparation of promising chiral nanomaterials.

Chiral helical substituted polyacetylene grafted on hollow polymer particles: preparation and enantioselective adsorption towards cinchona alkaloids

Hollow polymer particles tethering chiral helical polymer chains and functional carboxyl groups were prepared and applied in enantioselective adsorption.

Dual stimuli-responsive copolymers with precisely arranged degradable units: synthesis by controlled alternating copolymerization of oxyethylene-containing vinyl ethers and conjugated aldehydes

Thermoresponsive polymers with precisely arranged degradable units were synthesized via controlled cationic copolymerization of oxyethylene-containing vinyl ethers and conjugated aldehydes.