Active Sites in Single-Atom Fe-Nx-C Nanosheets for Selective Electrochemical Dechlorination of 1,2-Dichloroethane to Ethylene

Synergistic Elimination of Chlorophenols Using a Single-Atom Nickel with Single-Walled Carbon Nanotubes: The Roles of Adsorption, Hydrodechlorination, and the Electro-Fenton Process

Electrocatalytic degradation enables the efficient treatment of chlorinated pollutants (COPs); however, its application has been significantly hindered by the large amounts of unsafe intermediate products. In this study, we present a single-atom nickel with single-walled carbon nanotubes (SWCNTs) as an electrochemical reactor for the complete elimination of chlorophenols. Distinct products and reductive mechanisms were observed for Ni-N-C compared to Cu-N-C. Ni-N-C incorporation has a novel degradation pathway for efficient chlorophenol degradation involving hydrodechlorination and the electro-Fenton process. Most importantly, the weak adsorption between the chlorophenols and the SWCNTs promoted their dechlorination by the attached active atomic hydrogen (H*) formed on the Ni-N-C. Meanwhile, the SWCNTs improved the reduction of O2 to H2O2, which was subsequently decomposed by Ni-N-C to form hydroxyl radicals (·OH) for phenol oxidation. As a result, the degradation rate of 4-chlorophenol was increased by 5 and 10 times compared with those of the Ni-N-C and SWCNTs alone, respectively. The first-order reaction rate constant was 2.7 h-1, and the metal mass kinetics constant was 1956.5 min-1g-1. Aromatic COPs containing benzene rings could be degraded, but chloroacetic acids could not. This study demonstrates a new design for multifunctional electrochemical degradation that functions via dechlorination and the ·OH activation mechanism.

Three-dimensional RuCo alloy nanosheets arrays integrated pinewood-derived porous carbon for high-efficiency electrocatalytic nitrate reduction to ammonia

Electricity-driven nitrate (NO3-) to ammonia (NH3) conversion presents a unique opportunity to simultaneously eliminate nitrate from sewage while capturing ammonia. However, the Faradaic efficiency and ammonia yield in this eight-electron process remain unsatisfactory, underscoring the critical need for more effective electrocatalysts. In this study, a RuCo alloy nanosheets electrodeposited on pinewood-derived three-dimensional porous carbon (RuCo@TDC) is introduced as a highly-efficient electrocatalyst for the nitrate reduction reaction. The RuCo@TDC catalyst exhibits superior electrocatalytic performance, achieving the highest NH3 yield of 2.02 ± 0.11 mmol h-1 cm-2 at -0.6 V versus the reversible hydrogen electrode (vs. RHE) and the highest Faradaic efficiency of 95.7 ± 0.8 % at -0.2 V vs. RHE in an electrolyte mixture of 0.1 M KOH and 0.1 M KNO3. Furthermore, the Zn-NO3- battery using RuCo@TDC as the cathode provides a maximum power density of 2.46 mW cm-2 and a satisfactory NH3 yield of 1110 μg h-1 cm-2.

Simultaneously Engineering the First and Second Coordination Shells of Single Iron Catalysts for Enhanced Oxygen Reduction

The atomically dispersed Fe-N4 active site presents enormous potential for various renewable energy conversions. Despite its already remarkable catalytic performance, the local atomic microenvironment of each Fe atom can be regulated to further enhance its efficiency. Herein, a novel conceptual strategy that utilizes a simple salt-template polymerization method to simultaneously adjust the first coordination shell (Fe-N3S1) and second coordination shell (C-S-C, a structure similar to thiophene) of Fe-N4 isolated atoms is proposed. Theoretical studies suggest that this approach can redistribute charge density in the MN4 moiety, lowering the d-band center of the metal site. This weakens the binding of oxygenated intermediates, enhancing oxygen reduction reaction (ORR) activity when compared to only implementing coordination shell regulation. Based on the above discovery, a single Fe atom electrocatalyst with the optimal Fe-N3S1-S active moiety incorporated in nitrogen, sulfur co-doped graphene (Fe-SAc/NSG) is designed and synthesized. The Fe-SAc/NSG catalyst exhibits excellent alkaline ORR activity, exceeding benchmark Pt/C and most Fe-SAc ORR electrocatalysts, as well as superior stability in Zn-air battery. This work aims to pave the way for creating highly active single metal atom catalysts through the localized regulation of their atomic structure.

Mediated Peroxymonosulfate Activation at the Single Atom Fe-N3O1 Sites: Synergistic Degradation of Antibiotics by Two Non-Radical Pathways

The activation of persulfates to degrade refractory organic pollutants is a hot issue in advanced oxidation right now. Here, it is reported that single-atom Fe-incorporated carbon nitride (Fe-CN-650) can effectively activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) removal. Through some characterization techniques and DFT calculation, it is proved that Fe single atoms in Fe-CN-650 exist mainly in the form of Fe-N3O1 coordination, and Fe-N3O1 exhibited better affinity for PMS than the traditional Fe-N4 structure. The degradation rate constant of SMX in the Fe-CN-650/PMS system reached 0.472 min-1, and 90.80% of SMX can still be effectively degraded within 10 min after five consecutive recovery cycles. The radical quenching experiment and electrochemical analysis confirm that the pollutants are mainly degraded by two non-radical pathways through 1O2 and Fe(IV)═O induced at the Fe-N3O1 sites. In addition, the intermediate products of SMX degradation in the Fe-CN-650/PMS system show toxicity attenuation or non-toxicity. This study offers valuable insights into the design of carbon-based single-atom catalysts and provides a potential remediation technology for the optimum activation of PMS to disintegrate organic pollutants.

Synergistic Effects of Amine Functional Groups and Enriched-Atomic-Iron Sites in Carbon Dots for Industrial-Current-Density CO2 Electroreduction

Metal phthalocyanine molecules with Me-N4 centers have shown promise in electrocatalytic CO2 reduction (eCO2R) for CO generation. However, iron phthalocyanine (FePc) is an exception, exhibiting negligible eCO2R activity due to a higher CO2 to *COOH conversion barrier and stronger *CO binding energy. Here, amine functional groups onto atomic-Fe-rich carbon dots (Af-Fe-CDs) are introduced via a one-step solvothermal molecule fusion approach. Af-Fe-CDs feature well-defined Fe-N4 active sites and an impressive Fe loading (up to 8.5 wt%). The synergistic effect between Fe-N4 active centers and electron-donating amine functional groups in Af-Fe-CDs yielded outstanding CO2-to-CO conversion performance. At industrial-relevant current densities exceeding 400 mA cm-2 in a flow cell, Af-Fe-CDs achieved >92% selectivity, surpassing state-of-the-art CO2-to-CO electrocatalysts. The in situ electrochemical FTIR characterization combined with theoretical calculations elucidated that Fe-N4 integration with amine functional groups in Af-Fe-CDs significantly reduced energy barriers for *COOH intermediate formation and *CO desorption, enhancing eCO2R efficiency. The proposed synergistic effect offers a promising avenue for high-efficiency catalysts with elevated atomic-metal loadings.

Enhanced Fe(OH)2-driven reductive Dechlorination via shortened Fe-O bonds and colloidal medium

Fe2+ is usually adsorbed to the surface of iron-bearing clay, and iron (hydr)oxide in groundwater. However, the reductive activity of Fe(OH)2, a prevalent intermediate during the transformation of Fe2+, remains unclear. In this study, high-purity Fe(OH)2 was synthesized and tested for its activity in the degradation of carbon tetrachloride (CT). XRD data confirm that the synthesized material is a pure Fe(OH)2 crystal, exhibiting sharp peaks of (001) and (100) facets. Zeta potential analysis confirms that the off-white Fe(OH)2 is a colloidal suspension with a positive charge of ∼+35-50 mV. FTIR spectra reveal the formation of a coordination compound Fe2+ with OH-/OD-, derived from NaOH/OD. SEM and HRTEM results demonstrate that the Fe(OH)2 crystal has a regular octahedral structure with a size of ∼30-70 nm and average lattice spacings of 2.58 Å. Mössbauer spectrum verifies that the Fe2+ in Fe(OH)2/Fe(OD)2 is hexacoordinated with six Fe-O bonds. XAFS data demonstrate that the Fe-O bonds become shorter as the OH-:Fe(II) ratios increase. DFT results indicate that the (100) crystal face of Fe(OH)2 more readily transfers electrons to CT. In addition to being adsorbed to iron compounds, structural Fe2+ compounds such as Fe(OH)2 could also accelerate the electron transfer from Fe2+ to CT through shortened Fe-O bonds. The rate constant of CT reduction by Fe(OH)2 is as high as 0.794 min-1 when the OH-:Fe(II) ratio is 2.5 in water. This study aims to enhance our understanding of the structure-reactivity relationship of Fe2+ compounds in groundwater, particularly in relation to electron transfer mechanisms.

Enhanced electrochemical degradation of perfluorooctanoic acid by ligand-bridged PtII at Pt anodes

A new mechanism for the electro-oxidation (EO) degradation of perfluorooctanoic acid (PFOA) by Pt anode was reported. Using bridge-based ligand anions (SCN-, Cl- and N3-) as electrolytes, the degradation effect of PFOA by Pt-EO system was significant. Characterization of the Pt anode, the detection and addition of dissolved platinum ions, and the comparison of Pt with DSA anodes determined that the Pt- ligand complexes resulting from the specific binding of anodically dissolved PtII with ligand ions and C7F15COO- ((C7F15-COO)PtII-L3, L = SCN-, Cl- and N3-) on the electrode surface played a decisive role in the degradation of PFOA. Density functional theory (DFT) calculations showed that inside (C7F15-COO)PtII-L3 complexes, the electron density of the perfluorocarbon chain (including the F atom) compensated toward the carboxyl group and electrons in the PFOA ion transferred to the PtII-Cl3. Moreover, the (C7F15-COO)PtII-Cl3, as a whole, was calculated to migrate electrons toward the Pt anode, leading to the formation of PFOA radical (C7F15-COO•). Finally, with the detection of a series of short chain homologues, the CF2-unzipping degradation pathway of PFOA was proposed. The newly developed Pt-EO system is not affected by water quality conditions and can directly degrade alcohol eluent of PFOA, which has great potential for treating industrial wastewater contaminated with PFOA.

Effective boosting of halogenated α, β-unsaturated C4-dicarbonyl electrocatalytic hydrodehalogenation by 1 T'-MoS2/Ti3C2T2 (T = O, OH, F) heterojunctions: A theoretical study

Halogenated α, β-unsaturated C4-dicarbonyl (X-BDA), a novel family of high-toxicity ring cleavage products, is produced during the disinfection of phenolic compounds. The technique of electrocatalytic hydrodehalogenation (ECH) is efficient in rupturing carbon-halogen bonds and generating useful chemicals. This study used first principles to examine the ECH reaction mechanism of X-BDA and the subsequent hydrogenation reaction of the toxic derivative BDA over the 1 T'-MoS2/Ti3C2T2 (T = O, OH, F) catalysts. The catalytic activity of Ti3C2T2 (T = O, OH, F) catalysts decreases gradually with -OH, -F, -O functional group. The loading of 1 T'-MoS2 onto the Ti3C2T2 surface improves the stability and selectivity of Ti3C2T2. In particular, 1 T'-MoS2/Ti3C2(OH)2 is most conducive to the ECH reaction of X-BDA via a direct-indirect continuous reduction process. It exhibits excellent removal capability towards Cl-BDA, with decreasing reactivity in the order of the Cl-, Br-, and I-BDA. The material offers a solution to the challenging dechlorination issue. The dehalogenated product BDA can be hydrogenated to produce 1,4-butanedial, 1,4-butanediol, and 1,4-butenediol. Three valuable chemicals can be obtained by exerting an applied potential of - 0.65 V. This work suggests that the formation of heterojunction catalyst may lead to new strategies to improve ECH for environmental remediation applications.

Electrochemical reduction of wastewater by non-noble metal cathodes: From terminal purification to upcycling recovery

A shift beyond conventional environmental remediation to a sustainable pollutant upgrading conversion is extremely desirable due to the rising demand for resources and widespread chemical contamination. Electrochemical reduction processes (ERPs) have drawn considerable attention in recent years in the fields of oxyanion reduction, metal recovery, detoxification and high-value conversion of halogenated organics and benzenes. ERPs also have the potential to address the inherent limitations of conventional chemical reduction technologies in terms of hydrogen and noble metal requirements. Fundamentally, mechanisms of ERPs can be categorized into three main pathways: direct electron transfer, atomic hydrogen mediation, and electrode redox pairs. Furthermore, this review consolidates state-of-the-art non-noble metal cathodes and their performance comparable to noble metals (e.g., Pd, Pt) in electrochemical reduction of inorganic/organic pollutants. To overview the research trends of ERPs, we innovatively sort out the relationship between the electrochemical reduction rate, the charge of the pollutant, and the number of electron transfers based on the statistical analysis. And we propose potential countermeasures of pulsed electrocatalysis and flow mode enhancement for the bottlenecks in electron injection and mass transfer for electronegative pollutant reduction. We conclude by discussing the gaps in the scientific and engineering level of ERPs, and envisage that ERPs can be a low-carbon pathway for industrial wastewater detoxification and valorization.

Insights into Electrochemical Dehalogenation by Non-Noble Metal Single-Atom Cobalt with High Efficiency and Low Energy Consumption

It is critical to discover a non-noble metal catalyst with high catalytic activity capable of replacing palladium in electrochemical reduction. In this work, a highly efficient single-atom Co-N/C catalyst was synthesized with metal-organic frameworks (MOFs) as a precursor for electrochemical dehalogenation. X-ray absorption spectroscopy (XAS) revealed that Co-N/C exhibited a Co-N4 configuration, which had more active sites and a faster charge-transfer rate and thus enabled the efficient removal of florfenicol (FLO) at a wide pH, achieving a rate constant 3.5 and 2.1 times that of N/C and commercial Pd/C, respectively. The defluorination and dechlorination efficiencies were 67.6 and 95.6%, respectively, with extremely low Co leaching (6 μg L-1), low energy consumption (22.7 kWh kg-1), and high turnover frequency (TOF) (0.0350 min-1), demonstrating excellent dehalogenation performance. Spiking experiments and density functional theory (DFT) verified that Co-N4 was the active site and had the lowest energy barrier for forming atomic hydrogen (H*) (ΔGH*). Capture experiments, electron paramagnetic resonance (EPR), electrochemical tests, and in situ Fourier transform infrared (FTIR) proved that H* and direct electron transfer were responsible for dehalogenation. Toxicity assessment indicated that FLO toxicity decreased significantly after dehalogenation. This work develops a non-noble metal catalyst with broad application prospects in electrocatalytic dehalogenation.

Single-Atom Gd Nanoprobes for Self-Confirmative MRI with Robust Stability

Gadolinium (Gd)-based complexes are extensively utilized as contrast agents (CAs) in magnetic resonance imaging (MRI), yet, suffer from potential safety concerns and poor tumor targeting. Herein, as a mimic of Gd complex, single-atom Gd nanoprobes with r₁ and r₂ values of 34.2 and 80.1 mM^-1 s^-1 (far higher than that of commercial Gd CAs) at 3 T are constructed, which possessed T₁ /T₂ dual-mode MRI with excellent stability and good tumor targeting ability. Specifically, single-atom Gd is anchored on nitrogen-doped carbon matrix (Gd-N_x C) through spatial-confinement method, which is further subjected to controllable chemical etching to afford fully etched bowl-shape Gd-N_x C (feGd-N_x C) with hydrophilic properties and defined coordination structure, similar to commercial Gd complex. Such nanostructures not only maximized the Gd³⁺ site exposure, but also are suitable for self-confirmative diagnosis through one probe with dual-mode MRI. Moreover, the strong electron localization and interaction between Gd and N atoms afforded feGd-N_x C excellent kinetic inertness and thermal stability (no significant Gd³⁺ leaching is observed even incubated with Cu²⁺ and Zn²⁺ for two months), providing a creative design protocol for MRI CAs.

Bioinspired Hydrophobicity Coupled with Single Fe-N4 Sites Promotes Oxygen Diffusion for Efficient Zinc-Air Batteries

The poor oxygen diffusion and sluggish oxygen reduction reaction (ORR) kinetics at multiphase interfaces in the cathode suppress the practical application of zinc-air batteries. Developing effective strategies to tackle the issue is of great significance for overcoming the performance bottleneck but remains challenging. Here, a multiscale hydrophobic surface is designed on the iron single-atom catalyst via a gas-phase fluorination-assisted method inspired by the structure of gas-trapping mastoids on lotus leaves. The hydrophobic Fe-FNC attains a higher peak power density of up to 226 mW cm^-2 , a long durability of up close to 140 h, and better cyclic durability of up to 300 cycles compared to the corresponding Pt/C-based Zn-air battery. Experiments and theoretical calculations indicate that the formed more triple-phase interfaces and exposed isolated Fe-N₄ sites are proposed as the governing factors in boosting electrocatalytic ORR activity and remarkable cycling durability for Zn-air batteries.

Cubic CuFe2O4 Spinel with Octahedral Fe Active Sites for Electrochemical Dechlorination of 1,2-Dichloroethane

CuFe₂O₄ spinel has been considered as a promising catalyst for the electrochemical reaction, while the nature of the crystal phase on its intrinsic activity and the kind of active site need to be further explored. Herein, the crystal phase-dependent catalytic behavior and the main active sites of CuFe₂O₄ spinel for electrochemical dechlorination of 1,2-dichloroethane are carefully studied based on the combination of experiments and theoretical calculations. Cubic and tetragonal CuFe₂O₄ are successfully prepared by a facile sol-gel method combined with high temperature calcination. Impressively, CuFe₂O₄ with the cubic phase shows a higher activity and ethylene selectivity compared to CuFe₂O₄ with the tetragonal phase, suggesting a significant facilitation of electrocatalytic performance by the cubic crystal structure. Moreover, the octahedral Fe atom on the surface of cubic CuFe₂O₄(311) is the active site responsible to produce ethylene with the energy barrier of 0.40 eV. This work demonstrates the significance of crystal phase engineering for the optimization of electrocatalytic performance and offers an efficient strategy for the development of advanced electrocatalysts.

Selective dechlorination degradation of chlorobenzenes by dual single-atomic Fe/Ni catalyst with M-N/M-O active sites synergistic

Removal and detoxification of chlorobenzenes have attracted public concern, multiple active sites single-atom Fe and single-atom Ni composite nitrogen-doped graphene (Fe_SA/CN/Ni_SA) cathode catalyst supplied generation and adsorption capacity of hydrogen and hydroxyl active species. M-O active sites coupled with M-N improved activity and stability of the catalyst, and decreased bond breaking energy barrier of C-Cl, Fe_SA/CN/Ni_SA-NiF cathode showed superior removal performance of chlorinated aromatic hydrocarbons (monochlorobenzene: 98.9%, dichlorobenzene: over 90.4%, trichlorobenzene: over 85.7%) and selectivity. Chlorobenzenes were dechlorinated under low stepwise voltage on the Fe_SA/CN/Ni_SA-NiF cathode. The efficiencies of stepwise dechlorination reactions of chlorobenzenes were all above 76%, Faradaic efficiencies were above 71.8%. The Fe_SA/CN/Ni_SA-NiF cathode was not sensitive to the molecular structure and has overcome the high energy barrier of chlorobenzenes molecular structure. The electrophilic attack of H*_ads formed hyperconjugation bond weakened the possibility of the Cl atom forming a bond with the benzene ring, and was favorable for the Cl position to achieve single-electron transfer dechlorination. The selective stepwise dechlorination degradation of chlorobenzenes by Fe_SA/CN/Ni_SA-NiF cathode with multiple active sites demonstrated the advantaged performance of M-O and M-N active sites coupled synergistic in electrochemical reduction and degradation, providing a strategy for product-selective degradation of chlorinated aromatic hydrocarbons.

Efficient electrocatalytic valorization of chlorinated organic water pollutant to ethylene

Electrochemistry can provide an efficient and sustainable way to treat environmental waters polluted by chlorinated organic compounds. However, the electrochemical valorization of 1,2-dichloroethane (DCA) is currently challenged by the lack of a catalyst that can selectively convert DCA in aqueous solutions into ethylene. Here we report a catalyst comprising cobalt phthalocyanine molecules assembled on multiwalled carbon nanotubes that can electrochemically decompose aqueous DCA with high current and energy efficiencies. Ethylene is produced at high rates with unprecedented ~100% Faradaic efficiency across wide electrode potential and reactant concentration ranges. Kinetic studies and density functional theory calculations reveal that the rate-determining step is the first C-Cl bond breaking, which does not involve protons-a key mechanistic feature that enables cobalt phthalocyanine/carbon nanotube to efficiently catalyse DCA dechlorination and suppress the hydrogen evolution reaction. The nanotubular structure of the catalyst enables us to shape it into a flow-through electrified membrane, which we have used to demonstrate >95% DCA removal from simulated water samples with environmentally relevant DCA and electrolyte concentrations.

Single cobalt atom anchored on carbon nitride with cobalt nitrogen/oxygen active sites for efficient Fenton-like catalysis

As one of the tactics to produce reactive oxygen radicals, the Fenton-like process has been widely developed to solve the increasingly severe problem of environmental pollution. However, establishing advanced mediators with sufficient stability and activity for practical application is still a long-term objective. Herein, we proposed a facile strategy through polymeric carbon nitride (pCN) in-situ growth single cobalt atom for efficient degradation of antibiotics by peroxymonosulfate (PMS) activation. X-ray absorption spectroscopy and high-angle annular dark field-scanning transmission electron microscopy prove the single cobalt atoms are successfully anchored on pCN. Moreover, extended X-ray absorption fine structure analysis shows that the embedded cobalt atoms are constructed by covalently forming the Co-N bond and Co-O bond, which endow the single-atom cobalt catalyst with high stability. Experiment results indicate that the prepared single-atom cobalt catalyst can be used for efficient PMS activation catalytic degradation of tetracycline with a high degradation rate of 98.7 % in 60 min. And the CoN/O sites with single cobalt atoms serve as the active site for generating active radical species (singlet oxygen) from PMS activation. This work may expand the strategy for constructing single-atom catalysts and extend its application for the advanced oxidation process.

Adsorption and membrane separation for removal and recovery of volatile organic compounds

Volatile organic compounds (VOCs) are a crucial kind of pollutants in the environment due to their obvious features of severe toxicity, high volatility, and poor degradability. It is particularly urgent to control the emission of VOCs due to the persistent increase of concentration and the stringent regulations. In China, clear directions and requirements for reduction of VOCs have been given in the "national plan on environmental improvement for the 13th Five-Year Plan period". Therefore, the development of efficient technologies for removal and recovery of VOCs is of great significance. Recovery technologies are favored by researchers due to their advantages in both recycling VOCs and reducing carbon emissions. Among them, adsorption and membrane separation processes have been extensively studied due to their remarkable industrial prospects. This overview was to provide an up-to-date progress of adsorption and membrane separation for removal and recovery of VOCs. Firstly, adsorption and membrane separation were found to be the research hotspots through bibliometric analysis. Then, a comprehensive understanding of their mechanisms, factors, and current application statuses was discussed. Finally, the challenges and perspectives in this emerging field were briefly highlighted.

Atomic Dispersion of Zn2+ on N-Doped Carbon Materials: From Non-Activity to High Activity for Catalyzing Luminol-H2O2 Chemiluminescence

Fe and Co single-atom catalysts (SACs) have been widely explored in many fields, while Zn SACs are still in their infancy stage. Herein, we unexpectedly found that atomically dispersed Zn²⁺ on N-doped carbon material (Zn-N-C) exhibited high catalytic activity on luminol-H₂O₂ chemiluminescence (CL) reaction. The Zn-N-C SACs were readily prepared through simple pyrolyzation of the cheap precursors (dopamine and ZnCl₂). The mechanism of Zn SAC-catalyzed CL reaction of luminol-H₂O₂ was investigated in detail. The activity of Zn SACs originated from the Zn-N sites in the Zn-N-C structure. The monoatomic dispersion makes Zn²⁺ catalytic performance change from no activity to high activity in luminol-H₂O₂ CL reaction. This study demonstrated the particularity of the monatomic metal catalyst over the conventional metal ion. This work provides the unprecedented perspective for design of new metal SACs in CL reaction.

Tuning iron spin states in single-atom nanozymes enables efficient peroxidase mimicking

The large-scale application of nanozymes remains a significant challenge owing to their unsatisfactory catalytic performances. Featuring a unique electronic structure and coordination environment, single-atom nanozymes provide great opportunities to vividly mimic the specific metal catalytic center of natural enzymes and achieve superior enzyme-like activity. In this study, the spin state engineering of Fe single-atom nanozymes (FeNC) is employed to enhance their peroxidase-like activity. Pd nanoclusters (PdNC) are introduced into FeNC, whose electron-withdrawing properties rearrange the spin electron occupation in Fe(ii) of FeNC-PdNC from low spin to medium spin, facilitating the heterolysis of H2O2 and timely desorption of H2O. The spin-rearranged FeNC-PdNC exhibits greater H2O2 activation activity and rapid reaction kinetics compared to those of FeNC. As a proof of concept, FeNC-PdNC is used in the immunosorbent assay for the colorimetric detection of prostate-specific antigen and achieves an ultralow detection limit of 0.38 pg mL-1. Our spin-state engineering strategy provides a fundamental understanding of the catalytic mechanism of nanozymes and facilitates the design of advanced enzyme mimics.

Highly Efficient Electrocatalytic Upgrade of n-Valeraldehyde to Octane over Au SACs-NiMn2 O4 Spinel Synergetic Composites

In this work, electrocatalytic upgrade of n-valeraldehyde to octane with higher activity and selectivity is achieved over Au single-atom catalysts (SACs)-NiMn₂ O₄ spinel synergetic composites. Experiments combined with density functional theory calculation collaboratively demonstrate that Au single-atoms occupy surface Ni²⁺ vacancies of NiMn₂ O₄ , which play a dominant role in n-valeraldehyde selective oxidation. A detailed investigation reveals that the initial n-valeraldehyde molecule preferentially adsorbs on the Mn tetrahedral site of NiMn₂ O₄ spinel synergetic structures, and the subsequent n-valeraldehyde molecule easily adsorbs on the Ni site. Specifically, Au single-atom surficial derivation over spinel lowers the adsorption energy (E_ads ) of the initial n-valeraldehyde molecule, which will facilitate its adsorption on the Mn site of Au SACs-NiMn₂ O₄ . Furthermore, the single-atom Au surficial derivation not only alters the electronic structure of Au SACs-NiMn₂ O₄ but also lower the E_ads of subsequent n-valeraldehyde molecule. Hence, the subsequent n-valeraldehyde molecules prefer adsorption on Au sites rather than Ni sites, and the process of two alkyl radicals originating from Mn-C₄ H₉ and Au-C₄ H₉ dimerization into an octane is accordingly accelerated. This work will provide an avenue for the rational design of SACs and supply a vital mechanism for understanding the electrocatalytic upgrade of n-valeraldehyde to octane.

Electroreductive CO coupling of benzaldehyde over SACs Au-NiMn2O4 spinel synergetic composites

Electroreductive CO coupling provides a prospective strategy for biomass derivative upgrading via reducing the number of oxygen-containing functional groups and increasing their molecular weight. However, exploring superior electrocatalysts with effective reactivity and high selectivity for target products are still a challenge. In this work, single atom Au surface derived NiMn₂O₄ (SACs Au-NiMn₂O₄) spinel synergetic composites were fabricated by a versatile adsorption-deposition method and applied in electroreductive self-coupling of benzaldehyde to dibenzyl ether. The SACs Au-NiMn₂O₄ spinel synergetic composites enhanced electroreductive coupling of benzaldehyde, significantly improved the yield and selectivity of dibenzyl ether. Systematic characterizations and density functional theory calculation revealed that atomically dispersed Au occupied surface Ni²⁺ vacancies, which played a dominated role in CO coupling of benzaldehyde. Detailed calculation results showed that benzaldehyde preferred to adsorb on Ni octa-hedral sites of NiMn₂O₄ spinel synergetic structure, single atom Au surficial derivation over NiMn₂O₄ further reduced the adsorption energy (E_ads) of benzaldehyde on SACs Au-NiMn₂O₄, thus the CO coupling of benzaldehyde to dibenzyl ether was promoted. Moreover, single atom Au surficial derivation lowered the energy barrier of rate-determining step, facilitated the formation of dibenzyl ether species. Our work also paves an avenue for rational design single atom materials using spinel as support.

Main-Group Metal Single-Atomic Regulators in Dual-Metal Catalysts for Enhanced Electrochemical CO2 Reduction

Single-atom sites can not only act as active centers, but also serve as promising catalyst regulators and/or promoters. However, in many complex reaction systems such as electrochemical CO₂ reduction reaction (CO₂ RR), the introduction of single-atom regulators may inevitably induce the competitive hydrogen evolution reaction (HER) and thus reduce the selectivity. Here, the authors demonstrate that introducing HER-inert main-group metal single atoms adjacent to transition-metal single atoms can modify their electronic structure to enhance the CO₂ RR to CO without inducing the HER side reaction. Dual-metal Cu and In single-site atoms anchored on mesoporous nitrogen-doped carbon (denoted as Cu-In-NC) are prepared by the pyrolysis of a multimetallic metal-organic framework. Cu-In-NC shows a high faradic efficiency of 96% toward CO formation at -0.7 V versus reversible hydrogen electrode, superior to that of its monometallic single-atom counterparts. Density functional theory studies reveal that the HER-inert In sites can activate the adjacent Cu sites through electronic modifications, strengthening the binding of *COOH intermediate and thus boosting the electrochemical reduction of CO₂ to CO.

Engineering Dual Single-Atom Sites on 2D Ultrathin N-doped Carbon Nanosheets Attaining Ultra-Low-Temperature Zinc-Air Battery

Herein, a novel dual single-atom catalyst comprising adjacent Fe-N₄ and Mn-N₄ sites on 2D ultrathin N-doped carbon nanosheets with porous structure (FeMn-DSAC) was constructed as the cathode for a flexible low-temperature Zn-air battery (ZAB). FeMn-DSAC exhibits remarkable bifunctional activities for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Control experiments and density functional theory calculations reveal that the catalytic activity arises from the cooperative effect of the Fe/Mn dual-sites aiding *OOH dissociation as well as the porous 2D nanosheet structure promoting active sits exposure and mass transfer during the reaction process. The excellent bifunctional activity of FeMn-DSAC enables the ZAB to operate efficiently at ultra-low temperature of -40 °C, delivering 30 mW cm^-2 peak power density and retaining up to 86 % specific capacity from the room temperature counterpart.

Fe-N-C catalyst with Fe-NX sites anchored nano carboncubes derived from Fe-Zn-MOFs activate peroxymonosulfate for high-effective degradation of ciprofloxacin: Thermal activation and catalytic mechanism

Developing high-efficient catalysts is crucial for activating peroxymonosulfate (PMS). Fe-N-C catalysts exhibit excellent performance for PMS activation because of the contribution of doped N, Fe-Nx and Fe₃C sites. In our work, a series of Fe-N-C catalysts with high-performance was obtained by pyrolyzing Fe-Zn-MOFs precursors. During pyrolysis process, the change of chemical bonds and formation of active sites in the precursor were elucidated by characterization analysis and related catalytic experiments. Graphitic N, Fe-Nx and Fe₃C were confirmed to activate PMS synergistically for ciprofloxacin (CIP) degradation. Besides, the catalytic performance was proportional to the amount of doped iron and calcination temperature. Moreover, the Fe-N-C-3-800/PMS system not only displayed good recycling performance, but also had high anti-interference ability. Integrated with quenching and electron paramagnetic resonance (EPR) experiments, a non-radical pathway dominated by ¹O₂ was proposed. Furthermore, PMS could bond to Fe-N-C-3-800 to form intermediate for charge transfer, thus accelerate electron transfer between CIP and PMS to realize degradation of CIP. Six main pathways of CIP degradation were proposed, which include bond fission of N-C on piperazine ring and direct oxidation of CIP. This study provided a new idea for the design of heterogeneous carbon catalysts in advanced oxidation field.

Electrochemical Nitrate Production via Nitrogen Oxidation with Atomically Dispersed Fe on N-Doped Carbon Nanosheets

Electrocatalytic N₂ oxidation (NOR) into nitrate is a potential alternative to the emerging electrochemical N₂ reduction (NRR) into ammonia to achieve a higher efficiency and selectivity of artificial N₂ fixation, as O₂ from the competing oxygen evolution reaction (OER) potentially favors the oxygenation of NOR, which is different from the parasitic hydrogen evolution reaction (HER) for NRR. Here, we develop an atomically dispersed Fe-based catalyst on N-doped carbon nanosheets (AD-Fe NS) which exhibits an exceptional catalytic NOR capability with a record-high nitrate yield of 6.12 μ mol mg^-1 h^-1 (2.45 μ mol cm^-2 h^-1) and Faraday efficiency of 35.63%, outperforming all reported NOR catalysts and most well-developed NRR catalysts. The isotopic labeling NOR test validates the N source of the resultant nitrate from the N₂ electro-oxidation catalyzed by AD-Fe NS. Experimental and theoretical investigations identify Fe atoms in AD-Fe NS as active centers for NOR, which can effectively capture N₂ molecules and elongate the N≡N bond by the hybridization between Fe 3d orbitals and N 2p orbitals. This hybridization activates N₂ molecules and triggers the subsequent NOR. In addition, a NOR-related pathway has been proposed that reveals the positive effect of O₂ derived from the parasitic OER on the NO₃^- formation.

Interfacial-confined coordination to single-atom nanotherapeutics

Pursuing and developing effective methodologies to construct highly active catalytic sites to maximize the atomic and energy efficiency by material engineering are attractive. Relative to the tremendous researches of carbon-based single atom systems, the construction of bio-applicable single atom materials is still in its infancy. Herein, we propose a facile and general interfacial-confined coordination strategy to construct high-quality single-atom nanotherapeutic agent with Fe single atoms being anchored on defective carbon dots confined in a biocompatible mesoporous silica nanoreactor. Furthermore, the efficient energy conversion capability of silica-based Fe single atoms system has been demonstrated on the basis of the exogenous physical photo irradiation and endogenous biochemical reactive oxygen species stimulus in the confined mesoporous network. More importantly, the highest photothermal conversion efficiency with the mechanism of increased electron density and narrow bandgap of this single atom structure in defective carbon was proposed by the theoretical DFT calculations. The present methodology provides a scientific paradigm to design and develop versatile single atom nanotherapeutics with adjustable metal components and tune the corresponding reactions for safe and efficient tumor therapeutic strategy.

Developing single atom systems with improved catalytic potential for bio-application has major therapeutic potential. Here, the authors report on the development of a metal single-atom on a carbon dot support confined within mesoporous silica for the development of therapeutic agents.

Promoting Oxygen Reduction via Crafting Bridge-bonded Oxygen Ligands on Iron Single-Atom Catalyst

Single-atom Fe-N-C catalysts with Fe-N4 coordination structures hailed as the most promising candidates are prohibited by the severe aggregation and migration of metal atoms. Bonding confine strategies can effectively regulate...

A hierarchical monolithic cobalt-single-atom electrode for efficient hydrogen peroxide production in acid

The oxygen reduction reaction (ORR) through a 2e− pathway offers a feasible solution for hydrogen peroxide (H2O2) production and on-site application.

Generation of atomic hydrogen by Ni-Fe hydroxides: Mechanism and activity for hydrodechlorination of trichloroethylene

Atomic hydrogen (H•) is highly reactive for the hydrodechlorination of trichloroethylene (TCE). In this work, we found that the coprecipitation of Ni²⁺ and Fe²⁺ at neutral pH led to an unprecedented catalytic generation of H•. The generated H• effectively dechlorinate TCE to nontoxic ethylene and ethane, and Fe²⁺ is the only electron donor. The abundant adsorbed H• produced with a Ni/Fe ratio of 0.4 enhances hydrogen evolution reaction causing a low efficiency for hydrodechlorination. In contrast, the active absorbed H• is generated in the crystal lattice of Ni-Fe hydroxides with a Ni/Fe ratio of 3.0 causing highly efficient hydrodechlorination of TCE. This work not only reveals the mechanism of catalytic hydrodechlorination by Ni-Fe hydroxides at neutral pH, but also provides a novel approach to detoxify TCE in contaminated water using facile precipitated Ni-Fe hydroxides.

Elucidating the Role of Single-Atom Pd for Electrocatalytic Hydrodechlorination

In this study, we loaded Pd catalysts onto a reduced graphene oxide (rGO) support in an atomically dispersed fashion [i.e., Pd single-atom catalysts (SACs) on rGO or Pd₁/rGO] via a facile and scalable synthesis based on anchor-site and photoreduction techniques. The as-synthesized Pd₁/rGO significantly outperformed the Pd nanoparticle (Pd_nano) counterparts in the electrocatalytic hydrodechlorination of chlorinated phenols. Downsizing Pd_nano to Pd₁ leads to a substantially higher Pd atomic efficiency (14 times that of Pd_nano), remarkably reducing the cost for practical applications. The unique single-atom architecture of Pd₁ additionally affects the desorption energy of the intermediate, suppressing the catalyst poisoning by Cl^-, which is a prevalent challenge with Pd_nano. Characterization and experimental results demonstrate that the superior performance of Pd₁/rGO originates from (1) enhanced interfacial electron transfer through Pd-O bonds due to the electronic metal-support interaction and (2) increased atomic H (H*) utilization efficiency by inhibiting H₂ evolution on Pd₁. This work presents an important example of how the unique geometric and electronic structure of SACs can tune their catalytic performance toward beneficial use in environmental remediation applications.

Electrochemical reductive remediation of trichloroethylene contaminated groundwater using biomimetic iron-nitrogen-doped carbon

Electrochemical dechlorination is a prospective strategy to remediate trichloroethylene (TCE)-contaminated groundwater. In this work, iron-nitrogen-doped carbon (FeNC) mimicking microbiological dechlorination coenzymes was developed for TCE removal under environmentally related conditions. The biomimetic FeNC-900, FeNC-1000, and FeNC-1100 materials were synthesized via pyrolysis at different temperatures (900, 1000, and 1100 °C). Due to the synergistic effect of Fe-N₄ active sites and graphitic N sites, FeNC-1000 had the highest electron transfer efficiency and the largest electrochemical active surface area among the as-synthesized FeNC catalysts. The pseudo-first-order rate constants for TCE reduction using FeNC-1000 catalyst are 0.19, 0.28 and 0.36 h^-1 at potentials of -0.8 V, -1.0 V and -1.2 V, respectively. Active hydrogen and direct electrons transfer both contribute to the dechlorination from TCE to C₂H₄ and C₂H₆. FeNC maintain a high reactivity after five reuse cycles. Our study provides a novel approach for the dechlorination of chlorinated organic contaminants in groundwater.

Double Active Sites in Co-Nx-C@Co Electrocatalysts for Simultaneous Production of Hydrogen and Carbon Monoxide

The hydrogen evolution reaction (HER) by electrocatalytic water splitting is a prospective and economical route. However, the approach is severely hindered by the sluggish anodic OER, poor reactivity of electrocatalysts, and low-value-added byproducts at the anode. Herein, formaldehyde was added as an anode sacrificial agent, and a bifunctional Co-N_x-C@Co catalyst containing abundant Co-N₄ sites and Co nanoparticles was successfully fabricated and evaluated as both a cathodic and an anodic material for the HER and formaldehyde selective oxidation reaction (FSOR), respectively. Co-N_x-C@Co displayed a remarkable electrocatalytic performance simultaneously for both HER and FSOR with high hydrogen (H₂) and carbon monoxide (CO) selectivity. Density functional theory calculations combined with experiments identified that Co-N₄ and Co nanoparticles were dominating active sites for CO and H₂ generation, respectively. The coupling tactic of FSOR at the anode not only expedites the reaction rate of HER but also offers a high-efficiency and energy-saving means for the generation of valuable H₂/CO syngas.

Optimizing the metal-support interactions at the Pd-polymer carbon nitride Mott-Schottky heterojunction interface for an enhanced electrocatalytic hydrodechlorination reaction

We reported one novel strategy via band engineering of the semiconductor support to optimize the metal-support interactions at a Mott-Schottky heterojunction interface and enhance the metal's electrocatalytic hydrodechlorination (EHDC) performance. Taking palladium-polymer carbon nitride (Pd/PCN) as a model, the band tuning of PCN by heteroatomic phosphorus (P) doping substantially boosted the EHDC of 2,4-dichlorophenol (2,4-DCP, one typical chlorinated organic pollutants (COPs)) on Pd, and a peak specific activity of 0.172 min^-1 cm_Pd^-2 was achieved by Pd/P-PCN-0.25 (0.25 reflected the P content, and denoted the mass ratio of the P source to PCN precursor used in P-PCN synthesis), quadrupling 0.041 min^-1 cm_Pd^-2 of Pd/C and outperforming most of the reported catalysts. The mechanism study revealed the P doping in PCN enabled the positive shift of its Fermi level, which weakened the Pd-PCN interactions and alleviated the electron excess of Pd in Pd/PCN. The P-PCN in Pd/P-PCN-0.25 with the ideal band structure evoked a Pd electronic state that maximized EHDC efficiency. Further investigation into the intermediate products of EHDC on Pd/P-PCN and the biological safety of the 2,4-DCP-contaminated water after EHDC treatment demonstrated the EHDC over our catalyst was environmental-benignity for COPs abatement.

Fe3C-Assisted Single Atomic Fe Sites for Sensitive Electrochemical Biosensing

The rational construction of advanced sensing platforms to sensitively detect H₂O₂ produced by living cells is one of the challenges in both physiological and pathological fields. Owing to the extraordinary catalytic performances and similar metal coordination to natural metalloenzymes, single atomic site catalysts (SASCs) with intrinsic peroxidase (POD)-like activity have shown great promise for H₂O₂ detection. However, there still exists an obvious gap between them and natural enzymes because of the great challenge in rationally modulating the electronic and geometrical structures of central atoms. Note that the deliberate modulation of the metal-support interaction may give rise to the promising catalytic activity. In this work, an extremely sensitive electrochemical H₂O₂ biosensor based on single atomic Fe sites coupled with carbon-encapsulated Fe₃C crystals (Fe₃C@C/Fe-N-C) is proposed. Compared with the conventional Fe SASCs (Fe-N-C), Fe₃C@C/Fe-N-C exhibits superior POD-like activity and electrochemical H₂O₂ sensing performance with a high sensitivity of 1225 μA/mM·cm², fast response within 2 s, and a low detection limit of 0.26 μM. Significantly, sensitive monitoring of H₂O₂ released from living cells is also achieved. Moreover, the density functional theory calculations reveal that the incorporated Fe₃C nanocrystals donate electrons to single atomic Fe sites, endowing them with improved activation ability of H₂O₂ and further enhancing the overall activity. This work provides a new design of synergistically enhanced single atomic sites for electrochemical sensing applications.

Surface Ligand Environment Boosts the Electrocatalytic Hydrodechlorination Reaction on Palladium Nanoparticles

We present an enhanced catalytic efficiency of palladium (Pd) nanoparticles (NPs) for the electrocatalytic hydrodechlorination (EHDC) reaction by incorporating the tetraethylammonium chloride (TEAC) ligand into the surface of NPs. Both experimental and theoretical analyses reveal that the surface-adsorbed TEAC is converted to molecular amine (primarily triethylamine) under reductive potentials, forming a strong ligand-Pd interaction that is beneficial to the EHDC kinetics. Using the EHDC of 2,4-dichlorophenol (2,4-DCP), a dominant persistent pollutant identified by the U.S. Environmental Protection Agency, as an example, the Pd/amine composite delivers a mass activity of 2.32 min^-1 g_Pd^-1 and a specific activity of 0.16 min^-1 cm^-2 at -0.75 V versus Ag/AgCl, outperforming Pd and most of the previously reported catalysts. The mechanistic study reveals that the amine ligand offers three functions: the H⁺-pumping effect, the electronic effect, and the steric effect, providing a favorable environment for the generation of reactive hydrogen radicals (H*) for hydrogenolysis of the C-Cl bond. It also weakens the adsorption strength of EHDC products, alleviating their poisoning on Pd. Investigation into the intermediate products of EHDC on Pd/amine and the biological safety of the 2,4-DCP-contaminated water after EHDC treatment demonstrates that EHDC on Pd/amine is environmentally benign for halogenated organic pollutant abatement. This work suggests that the tuning of NP catalysis using facile ligand post-treatment may lead to new strategies to improve EHDC for environmental remediation applications.