Universal in Situ Crafted MOx-MXene Heterostructures as Heavy and Multifunctional Hosts for 3D-Printed Li-S Batteries

Double catalysis of Co9Se8-Ni3Se4 heterogeneous dual-chamber core-shell Achieves high conversion of polysulfides

Achieving efficient catalytic conversion of lithium polysulfides is a key way to improve kinetics in lithium-sulfur (Li-S) batteries. However, due to the limited nature of the catalyst interface, it is difficult to achieve a high conversion rate of LiPSs in one step. A novel heterogeneous dual-chamber core-shell nanocatalyst (Co9Se8-Ni3Se4@PC) is described here, which efficiently accommodates sulfur and provides a heterogeneous dual catalytic interface like a two-stage "filter". The dual guarantee provides a rapid and high-ratio catalytic conversion of LiPSs. Through in-situ Raman experiments and theoretical analysis, it has been proved that the dual-chamber multi-stage catalytic structure can promote the efficient conversion of LiPSs and good sulfur species reversibility. The Co9Se8-Ni3Se4@PC cathode provides an initial specific capacity of 923mAh/g at 2C, and the average capacity decay rate after 800 cycles is only 0.048 %. This work provides new ideas for designing new nanocatalysts in lithium-sulfur systems and insights into achieving multi-stage catalysis in structural design.

A Review of Advances in Heterostructured Catalysts for Li-S Batteries: Structural Design and Mechanism Analysis

Lithium-sulfur (Li-S) batteries, acclaimed for their high energy density, cost-effectiveness, and environmental benefits, are widely considered as a leading candidate for the next-generation energy storage systems. However, their commercialization is impeded by critical challenges, such as the shuttle effect of lithium polysulfides and sluggish reaction kinetics. These issues can be effectively mitigated through the design of heterojunction catalysts. Despite the remarkable advancements in this field, a comprehensive elucidation of the underlying mechanisms and structure-performance relationships of heterojunction catalysts in sulfur electrocatalysis systems remains conspicuously absent. Here, it is expounded upon the mechanisms underlying heterostructure engineering in Li-S batteries and the latest advancements in heterostructure catalysts guided by these multifarious mechanisms are examined. Furthermore, it illuminates groundbreaking paradigms in heterostructure design, encompassing the realms of composition, structure, function, and application. Finally, the research trends and future development directions for the novel heterojunction materials are extensively deliberated. This study not only provides a comprehensive and profound understanding of heterostructure catalysts in Li-S batteries but also facilitates the exploration of new electrocatalyst systems.

Five-Axis Curved-Surface Multi-Material Printing on Conformal Surface to Construct Aqueous Zinc-Ion Battery Modules

Compact batteries and electronic devices offer a plethora of advantages, including space optimization, portability, integration capability, responsiveness, and reliability. These attributes are crucial technical enablers for the design and implementation of various electronic devices and systems within scientific exploration. Thus, the group harnesses additive manufacturing technology, specifically utilizing five-axis curved-surface multi-material printing equipment, to fabricate aqueous zinc-ion batteries with tungsten-doped manganese dioxide cathode for enhanced adaptability and customization. The five-axis linkage motion system facilitates shorter ion transportation paths for compact batteries and ensures precise and efficient molding of non-developable curved surfaces. Afterward, the compact cell is integrated with a printed nano-silver serpentine resistor temperature sensor, and an integrated functional circuit is created using intense-pulse sintering. Incorporating an emitting Light Emitting Diode (LED) allows temperature measurement through variations in LED brightness. The energy storage module with a high degree of conformity on the carrier surface has the advantages of small size and improved space utilization. The capability to produce Zinc-ion batteries (ZIBs) on curved surfaces presents new avenues for innovation in energy storage technologies, paving the way for the realization of flexible and conformal power sources.

Multi-Interface Engineering of MXenes for Self-Powered Wearable Devices

Self-powered wearable devices with integrated energy supply module and sensitive sensors have significantly blossomed for continuous monitoring of human activity and the surrounding environment in healthcare sectors. The emerging of MXene-based materials has brought research upsurge in the fields of energy and electronics, owing to their excellent electrochemical performance, large surface area, superior mechanical performance, and tunable interfacial properties, where their performance can be further boosted via multi-interface engineering. Herein, a comprehensive review of recent progress in MXenes for self-powered wearable devices is discussed from the aspects of multi-interface engineering. The fundamental properties of MXenes including electronic, mechanical, optical, and thermal characteristics are discussed in detail. Different from previous review works on MXenes, multi-interface engineering of MXenes from termination regulation to surface modification and their impact on the performance of materials and energy storage/conversion devices are summarized. Based on the interfacial manipulation strategies, potential applications of MXene-based self-powered wearable devices are outlined. Finally, proposals and perspectives are provided on the current challenges and future directions in MXene-based self-powered wearable devices.

A Sweet Synthesis of MXenes

Two-dimensional transition metal carbides/nitrides (MXenes) have shown great promise in various applications. However, mass production of MXenes suffers from the excessive use of toxic fluorine-containing reagents. Herein, a new method was validated for synthesizing MXenes from five MAX ceramics. The method features a minimized (stoichiometric) dosage of F-containing reagent (NaBF4) and polyols (glycerol, erythritol, and xylitol) as the reaction solvent. Due to the sweetness of polyols and the low environmental impact, we refer to this method as a "sweet" synthesis of MXenes. An in-depth molecular dynamics simulation study, combined with experimental kinetic parameters, further revealed that the diffusion of F- in the confined interplanar space is rate-determining for the etching reaction. The expansion of interlayer spacing by polyols effectively reduces the diffusion activation energy of F- and accelerates the etching reaction.

V-MXenes for Energy Storage/Conversion Applications

MXenes, a two-dimensional (2D) material, exhibit excellent optical, electrical, chemical, mechanical, and electrochemical properties. Titanium-based MXene (Ti-MXene) has been extensively studied and serves as the foundation for 2D MXenes. However, other transition metals possess the potential to offer excellent properties in various applications. This comprehensive review aims to provide an overview of the properties, challenges, key findings, and applications of less-explored vanadium-based MXenes (V-MXenes) and their composites. The current trends in V-MXene and their composites for energy storage and conversion applications have been thoroughly summarized. Overall, this review offers valuable insights, identifies potential opportunities, and provides key suggestions for future advancements in the MXenes and energy storage/conversion applications.

A Review on Engineering Transition Metal Compound Catalysts to Accelerate the Redox Kinetics of Sulfur Cathodes for Lithium-Sulfur Batteries

Engineering transition metal compounds (TMCs) catalysts with excellent adsorption-catalytic ability has been one of the most effective strategies to accelerate the redox kinetics of sulfur cathodes. Herein, this review focuses on engineering TMCs catalysts by cation doping/anion doping/dual doping, bimetallic/bi-anionic TMCs, and TMCs-based heterostructure composites. It is obvious that introducing cations/anions to TMCs or constructing heterostructure can boost adsorption-catalytic capacity by regulating the electronic structure including energy band, d/p-band center, electron filling, and valence state. Moreover, the electronic structure of doped/dual-ionic TMCs are adjusted by inducing ions with different electronegativity, electron filling, and ion radius, resulting in electron redistribution, bonds reconstruction, induced vacancies due to the electronic interaction and changed crystal structure such as lattice spacing and lattice distortion. Different from the aforementioned two strategies, heterostructures are constructed by two types of TMCs with different Fermi energy levels, which causes built-in electric field and electrons transfer through the interface, and induces electron redistribution and arranged local atoms to regulate the electronic structure. Additionally, the lacking studies of the three strategies to comprehensively regulate electronic structure for improving catalytic performance are pointed out. It is believed that this review can guide the design of advanced TMCs catalysts for boosting redox of lithium sulfur batteries.

Enhanced TiO2/SiCx Active Layer Formed In Situ on Coal Gangue/Ti3C2 MXene Electrocatalyst as Catalytic Integrated Units for Efficient Li-O2 Batteries

The pursuit of efficient cathode catalysts to improve cycle stability at ultra-high rates plays an important role in boosting the practical utilization of Li-O2 batteries. Featured as industrial solid waste, coal gangue with rich electrochemical active components could be a promising candidate for electrocatalysts. Here, a coal gangue/Ti3C2 MXene hybrid with a TiO2/SiCx active layer is synthesized and applied as a cathode catalyst in Li-O2 batteries. The coal gangue/Ti3C2 MXene hybrid has a tailored amorphous/crystalline heterostructure, enhanced active TiO2 termination, and a stable SiCx protective layer; thereby, it achieved an excellent rate stability. The Li-O2 battery, assembled with a coal gangue/Ti3C2 MXene cathode catalyst, was found to obtain a competitive full discharge capacity of 3959 mAh g-1 and a considerable long-term endurance of 180 h (up to 175 cycles), with a stable voltage polarization of 1.72 V at 2500 mA g-1. Comprehensive characterization measurements (SEM, TEM, XPS, etc.) were applied; an in-depth analysis was conducted to reveal the critical role of TiO2/SiCX active units in regulating the micro-chemical constitution and the enhanced synergistic effect between coal gangue and Ti3C2 MXene. This work could provide considerable insights into the rational design of catalysts derived from solid waste gangue for high-rate Li-O2 batteries.

High-Entropy MXene as Bifunctional Mediator toward Advanced Li-S Full Batteries

The development of high-energy-density Li-S batteries (LSBs) is still hindered by the disturbing polysulfide shuttle effect. Herein, with clever combination between "high entropy" and MXene, an HE-MXene doped graphene composite containing multiple element quasi-atoms as bifunctional mediator for separator modification (HE-MXene/G@PP) in LSBs is proposed. The HE-MXene/G@PP offers high electrical conductivity for fast lithium polysulfide (LiPS) redox conversion kinetics, abundant metal active sites for efficient chemisorption with LiPSs, and strong lipophilic characteristics for uniform Li+ deposition on lithium metal surface. As demonstrated by DFT theoretical calculations, in situ Raman, and DRT results successively, HE-MXene/G@PP efficiently captures LiPSs through synergistic modulation of the cocktail effect and accelerates the LiPSs redox reaction, and the lattice distortion effect effectively induces the homogeneous deposition of dendritic-free lithium. Therefore, this work achieves excellent long-term cycling performance with a decay rate of 0.026%/0.031% per cycle after 1200 cycles at 1 C/2 C. The Li||Li symmetric cell still maintains a stable overpotential after 6000 h under 40 mA cm-2/40 mAh cm-2. Furthermore, it delivers favorable cycling stability under 7.8 mg cm-2 and a low E/S ratio of 5.6 μL mg-1. This strategy provides a rational approach to resolve the sulfur cathode and lithium anode problems simultaneously.

Unraveling the Coupling Effect between Cathode and Anode toward Practical Lithium-Sulfur Batteries

The localized reaction heterogeneity of the sulfur cathode and the uneven Li deposition on the Li anode are intractable issues for lithium-sulfur (Li-S) batteries under practical operation. Despite impressive progress in separately optimizing the sulfur cathode or Li anode, a comprehensive understanding of the highly coupled relationship between the cathode and anode is still lacking. In this work, inspired by the Butler-Volmer equation, a binary descriptor (IBD ) assisting the rational structural design of sulfur cathode by simultaneously considering the mass-transport index (Imass ) and the charge-transfer index (Icharge ) is identified, and subsequently the relationship between IBD and the morphological evolution of Li anode is established. Guided by the IBD , a scalable electrode providing interpenetrated flow channels for efficient mass/charge transfer, full utilization of active sulfur, and mechanically elastic support for aggressive electrochemical reactions under practical conditions is reported. These characteristics induce a homogenous distribution of local current densities and reduced reaction heterogeneity on both sides of the cathode and anode. Impressive energy density of 318 Wh kg-1 and 473 Wh L-1 in an Ah-level pouch cell can be achieved by the design concept. This work offers a promising paradigm for unlocking the interaction between cathode and anode and designing high-energy practical Li-S batteries.

Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels

Rheological characterisation plays a crucial role in developing and optimising advanced materials in the form of hydrogels and aerogels, especially if 3D printing technologies are involved. Applications ranging from tissue engineering to environmental remediation require the fine-tuning of such properties. Nonetheless, their complex rheological behaviour presents unique challenges in additive manufacturing. This review outlines the vital rheological parameters that influence the printability of hydrogel and aerogel inks, emphasising the importance of viscosity, yield stress, and viscoelasticity. Furthermore, the article discusses the latest developments in rheological modifiers and printing techniques that enable precise control over material deposition and resolution in 3D printing. By understanding and manipulating the rheological properties of these materials, researchers can explore new possibilities for applications such as biomedicine or nanotechnology. An optimal 3D printing ink requires strong shear-thinning behaviour for smooth extrusion, forming continuous filaments. Favourable thixotropic properties aid viscosity recovery post-printing, and adequate yield stress and G' are crucial for structural integrity, preventing deformation or collapse in printed objects, and ensuring high-fidelity preservation of shapes. This insight into rheology provides tools for the future of material design and manufacturing in the rapidly evolving field of 3D printing of hydrogels and aerogels.

Heterostructures Regulating Lithium Polysulfides for Advanced Lithium-Sulfur Batteries

Sluggish reaction kinetics and severe shuttling effect of lithium polysulfides seriously hinder the development of lithium-sulfur batteries. Heterostructures, due to unique properties, have congenital advantages that are difficult to be achieved by single-component materials in regulating lithium polysulfides by efficient catalysis and strong adsorption to solve the problems of poor reaction kinetics and serious shuttling effect of lithium-sulfur batteries. In this review, the principles of heterostructures expediting lithium polysulfides conversion and anchoring lithium polysulfides are detailedly analyzed, and the application of heterostructures as sulfur host, interlayer, and separator modifier to improve the performance of lithium-sulfur batteries is systematically reviewed. Finally, the problems that need to be solved in the future study and application of heterostructures in lithium-sulfur batteries are prospected. This review will provide a valuable reference for the development of heterostructures in advanced lithium-sulfur batteries.

Printable Energy Storage: Stay or Go?

In the era of rapidly evolving smart electronic devices, the development of power supplies with miniaturization and versatility is imperative. Prevailing manufacturing approaches for basic energy modules impose limitations on their size and shape design. Printing is an emerging technique to fabricate energy storage systems with tailorable mass loading and compelling energy output, benefiting from elaborate structural configurations and unobstructed charge transports. The derived "printable energy storage" realm is now focusing on materials exploration, ink formulation, and device construction. This contribution aims to illustrate the current state-of-the-art in printable energy storage and identify the existing challenges in the 3D printing design of electrodes. Insights into the future outlooks and directions for the development of this field are provided, with the goal of enabling printable energy storage toward practical applications.

3D printing of hierarchically micro/nanostructured electrodes for high-performance rechargeable batteries

3D printing, also known as additive manufacturing, is capable of fabricating 3D hierarchical micro/nanostructures by depositing a layer-upon-layer of precursor materials and solvent-based inks under the assistance of computer-aided design (CAD) files. 3D printing has been employed to construct 3D hierarchically micro/nanostructured electrodes for rechargeable batteries, endowing them with high specific surface areas, short ion transport lengths, and high mass loading. This review summarizes the advantages and limitations of various 3D printing methods and presents the recent developments of 3D-printed electrodes in rechargeable batteries, such as lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries. Furthermore, the challenges and perspectives of the 3D printing technique for electrodes and rechargeable batteries are put forward. This review will provide new insight into the 3D printing of hierarchically micro/nanostructured electrodes in rechargeable batteries and promote the development of 3D printed electrodes and batteries in the future.

MXene Contact Engineering for Printed Electronics

MXenes emerging as an amazing class of 2D layered materials, have drawn great attention in the past decade. Recent progress suggest that MXene-based materials have been widely explored as conductive electrodes for printed electronics, including electronic and optoelectronic devices, sensors, and energy storage systems. Here, the critical factors impacting device performance are comprehensively interpreted from the viewpoint of contact engineering, thereby giving a deep understanding of surface microstructures, contact defects, and energy level matching as well as their interaction principles. This review also summarizes the existing challenges of MXene inks and the related printing techniques, aiming at inspiring researchers to develop novel large-area and high-resolution printing integration methods. Moreover, to effectually tune the states of contact interface and meet the urgent demands of printed electronics, the significance of MXene contact engineering in reducing defects, matching energy levels, and regulating performance is highlighted. Finally, the printed electronics constructed by the collaborative combination of the printing process and contact engineering are discussed.

Dual-Conductive CoSe2 @TiSe2 -C Heterostructures Promoting Overall Sulfur Redox Kinetics under High Sulfur Loading and Lean Electrolyte

Although lithium-sulfur batteries (LSBs) possess a high theoretical specific capacity and energy density, the inherent problems including sluggish sulfur conversion kinetics and the shuttling of soluble lithium polysulfides (LiPSs) have severely hindered the development of LSBs. Herein, cobalt selenide (CoSe₂ ) polyhedrons anchored on few-layer TiSe₂ -C nanosheets derived from Ti₃ C₂ T_x MXenes (CoSe₂ @TiSe₂ -C) are reported for the first time. The dual-conductive CoSe₂ @TiSe₂ -C heterostructures can accelerate the conversion reaction from liquid LiPSs to solid Li₂ S and promote Li₂ S dissociation process through high conductivity and lowered reaction energy barriers for promoting overall sulfur redox kinetics, especially under high sulfur loadings and lean electrolyte. Electrochemical analysis and density functional theory calculation results clearly reveal the catalytic mechanisms of the CoSe₂ @TiSe₂ -C heterostructures from the electronic structure and atomic level. As a result, the cell with CoSe₂ @TiSe₂ -C interlayer maintains a superior cycling performance with 842.4 mAh g^-1  and a low-capacity decay of 0.031% per cycle over 800 cycles at 1.0 C under a sulfur loading of 2.5 mg cm^-2 . More encouragingly, it with a high sulfur loading of ≈7.0 mg cm^-2  still harvests a high areal capacity of ≈6.25 mAh cm^-2  under lean electrolyte (electrolyte/sulfur, E/S ≈ 4.5 µL mg^-1 ) after 50 cycles at 0.05 C.

Synergistically Accelerating Adsorption-Electrocataysis of Sulfur Species via Interfacial Built-In Electric Field of SnS2 -MXene Mott-Schottky Heterojunction in Li-S Batteries

Developing efficient heterojunction electrocatalysts and uncovering their atomic-level interfacial mechanism in promoting sulfur-species adsorption-electrocatalysis are interesting yet challenging in lithium-sulfur batteries (LSBs). Here, multifunctional SnS₂ -MXene Mott-Schottky heterojunctions with interfacial built-in electric field (BIEF) are developed, as a model to decipher their BIEF effect for accelerating synergistic adsorption-electrocatalysis of bidirectional sulfur conversion. Theoretical and experimental analysis confirm that because Ti atoms in MXene easily lost electrons, whereas S atoms in SnS₂ easily gain electrons, and under Mott-Schottky influence, SnS₂ -MXene heterojunction forms the spontaneous BIEF, leading to the electronic flow from MXene to SnS₂ , so SnS₂ surface easily bonds with more lithium polysulfides. Moreover, the hetero-interface quickly propels abundant Li⁺ /electron transfer, so greatly lowering Li₂ S nucleation/decomposition barrier, promoting bidirectional sulfur conversion. Therefore, S/SnS₂ -MXene cathode displays a high reversible capacity (1,188.5 mAh g^-1 at 0.2 C) and a stable long-life span with 500 cycles (≈82.7% retention at 1.0 C). Importantly, the thick sulfur cathode (sulfur loading: 8.0 mg cm^-2 ) presents a large areal capacity of 7.35 mAh cm^-2 at lean electrolyte of 5.0 µL mg_s ^-1 . This work verifies the substantive mechanism that how BIEF optimizes the catalytic performance of heterojunctions and provides an effective strategy for deigning efficient bidirectional Li-S catalysts in LSBs.

Dual-Functional Hosts for Polysulfides Conversion and Lithium Plating/Stripping towards Lithium-Sulfur Full Cells

The practical application of lithium-sulfur (Li-S) batteries is greatly hindered by the shuttle effect of dissolved polysulfides in the sulfur cathode and the severe dendritic growth in the lithium anode. Adopting one type of effective host with dual-functions including both inhibiting polysulfide dissolution and regulating Li plating/stripping, is recently an emerging research highlight in Li-S battery. This review focuses on such dual-functional hosts and systematically summarizes the recent research progress and application scenarios. Firstly, this review briefly describes the stubborn issues in Li-S battery operations and the sophisticated counter measurements over the challenges by dual-functional behaviors. Then, the latest advances on dual-functional hosts for both cathode and anode in Li-S full cells are catalogued as species, including metal chalcogenides, metal carbides, metal nitrides, heterostuctures, and the possible mechanisms during the process. Besides, we also outlined the theoretical calculation tools for the dual-functional host based on the first principles. Finally, several sound perspectives are also rationally proposed for fundamental research and practical development as guidelines.

Multiple Effects of High Surface Area Hollow Nanospheres Assembled by Nickel Cobaltate Nanosheets on Soluble Lithium Polysulfides

Inhibiting the shuttle effect of soluble polysulfides and improving slow reaction kinetics are key factors for the future development of Li-S batteries. Herein, edelweiss shaped NiCo₂O₄ hollow nanospheres with a high surface area were prepared by a simple template method to modify the separator to realize multiple physical constraints and strong chemical anchoring on the polysulfides. On one hand, the good electrolyte wettability of NiCo₂O₄ promoted the migration of Li-ions and greatly improved the dynamics. On the other hand, mesoporous NiCo₂O₄ nanomaterials provided many strong chemical binding sites for loading sulfur species. The hollow structure also provided a physical barrier to mitigate the sulfur species diffusion. Therefore, the modified separator realized multiple physical constraints and strong chemical anchoring on sulfur species. As a result, the sulfur cathode based on this composite separator showed significantly enhanced electrochemical performance. Even at 4 C, a high capacity of 505 mAh g^-1 was obtained, and about 80.6% could be retained after 300 cycles.

Adaptively Reforming Natural Enzyme to Activate Catalytic Microenvironment for Polysulfide Conversion in Lithium-Sulfur Batteries

Catalyzing polysulfide conversion is a promising way toward accelerating complex and sluggish sulfur redox reactions (SRRs) in lithium-sulfur batteries. Reasonable alteration of an enzyme provides a new means to expand the natural enzyme universe to catalytic reactions in abiotic systems. Herein, we design and fabricate a denatured hemocyanin (DHc) to efficiently catalyze the SRR. After denaturation, the unfolded β-sheet architectures with exposed rich atomically dispersed Cu, O, and N sites and intermolecular H-bonds are formed in DHc, which not only provides the polysulfides for a strong spatial confinement effect in microenvironment via S-O and Li···N interactions but also activates chemical channels for electron/Li⁺ transport into the Cu active center via H/Li-bonds to catalyze polysulfide conversion. As expected, the charge/discharge kinetics of DHc-containing cathodes is fundamentally improved in cyclability with nearly 100% Coulombic efficiency and capacity even under high sulfur loading (4.3 mg cm^-2) and lean-electrolyte (8 μL mg^-1) conditions.

Construction of Ultrathin Layered MXene-TiN Heterostructure Enabling Favorable Catalytic Ability for High-Areal-Capacity Lithium-Sulfur Batteries

Catalysis has been regarded as an effective strategy to mitigate sluggish reaction kinetics and serious shuttle effect of Li-S batteries. Herein, a spherical structure consists of ultrathin layered Ti₃C₂T_x-TiN heterostructures (MX-TiN) through in-situ nitridation method is reported. Through controllable nitridation, highly conductive TiN layer grew on the surface and close coupled with interior MXene to form unique 2D heterostructures. The ultrathin heterostructure with only several nanometers in thickness enables outstanding ability to shorten electrons diffusion distance during electrochemical reactions and enlarge active surface with abundant adsorptive and catalytic sites. Moreover, the (001) surface of TiN is dominated by metallic Ti-3d states, which ensures fast transmitting electrons from high conductive MX-TiN matrix and thus guarantees efficient catalytic performance. Calculations and experiments demonstrate that polysulfides are strongly immobilized on MX-TiN, meanwhile the bidirectional reaction kinetics are catalytically enhanced by reducing the conversion barrier between liquid LiPSs and solid Li₂S₂/Li₂S. As a result, the S/MX-TiN cathode achieves excellent long-term cyclability with extremely low-capacity fading rate of 0.022% over 1000 cycles and remarkable areal capacity of 8.27 mAh cm^-2 at high sulfur loading and lean electrolytes.

A Universal Spinning-Coordinating Strategy to Construct Continuous Metal-Nitrogen-Carbon Heterointerface with Boosted Lithium Polysulfides Immobilization for 3D-Printed LiS Batteries

Constructing intimate coupling between transition metal and carbon nanomaterials is an effective means to achieve strong immobilization of lithium polysulfides (LiPSs) in the applications of lithium-sulfur (LiS) batteries. Herein, a universal spinning-coordinating strategy of constructing continuous metal-nitrogen-carbon (MNC, M = Co, Fe, Ni) heterointerface is reported to covalently bond metal nanoparticles with nitrogen-doped porous carbon fibers (denoted as M/MN@NPCF). Guided by theoretical simulations, the Co/CoN@NPCF hybrid is synthesized as a proof of concept and used as an efficient sulfur host material. The polarized CoNC bridging bonds can induce rapid electron transfer from Co nanoparticles to the NPCF skeleton, promoting the chemical anchoring of LiPSs to improve sulfur utilization. Hence, the as-assembled LiS battery presents a remarkable capacity of 781 mAh g-1 at 2.0 C and a prominent cycling lifespan with a low decay rate of only 0.032% per cycle. Additionally, a well-designed Co/CoN@NPCF-S electrode with a high sulfur loading of 7.1 mg cm-2 is further achieved by 3D printing technique, which demonstrates an excellent areal capacity of 6.4 mAh cm-2 at 0.2 C under a lean-electrolyte condition. The acquired insights into strongly coupled continuous heterointerface in this work pave the way for rational designs of host materials in LiS systems.

Selective Nitridation Crafted a High-Density, Carbon-Free Heterostructure Host with Built-In Electric Field for Enhanced Energy Density Li-S Batteries

To achieve both high gravimetric and volumetric energy densities of lithium-sulfur (Li-S) batteries, it is essential yet challenging to develop low-porosity dense electrodes along with diminishment of the electrolyte and other lightweight inactive components. Herein, a compact TiO2 @VN heterostructure with high true density (5.01 g cm-3 ) is proposed crafted by ingenious selective nitridation, serving as carbon-free dual-capable hosts for both sulfur and lithium. As a heavy S host, the interface-engineered heterostructure integrates adsorptive TiO2 with high conductive VN and concurrently yields a built-in electric field for charge-redistribution at the TiO2 /VN interfaces with enlarged active locations for trapping-migration-conversion of polysulfides. Thus-fabricated TiO2 @VN-S composite harnessing high tap-density favors constructing dense cathodes (≈1.7 g cm-3 ) with low porosity (<30 vol%), exhibiting dual-boosted cathode-level peak volumetric-/gravimetric-energy-densities nearly 1700 Wh L-1 cathode /1000 Wh kg-1 cathode at sulfur loading of 4.2 mg cm-2 and prominent areal capacity (6.7 mAh cm-2 ) at 7.6 mg cm-2 with reduced electrolyte (<10 µL mg-1 sulfur ). Particular lithiophilicity of the TiO2 @VN is demonstrated as Li host to uniformly tune Li nucleation with restrained dendrite growth, consequently bestowing the assembled full-cell with high electrode-level volumetric/gravimetric-energy-density beyond 950 Wh L-1 cathode+anode /560 Wh kg-1 cathode+anode at 3.6 mg cm-2 sulfur loading alongside limited lithium excess (≈50%).

3D-Printed Sodiophilic V2CTx/rGO-CNT MXene Microgrid Aerogel for Stable Na Metal Anode with High Areal Capacity

Featuring a high theoretical capacity, low cost, and abundant resources, sodium metal has emerged as an ideal anode material for sodium ion batteries. However, the real feasibility of sodium metal anodes is still hampered by the uncontrolled sodium dendrite problems. Herein, an artificial three-dimensional (3D) hierarchical porous sodiophilic V₂CT_x/rGO-CNT microgrid aerogel is fabricated by a direct-ink writing 3D printing technology and further adopted as the matrix of Na metal to deliver a Na@V₂CT_x/rGO-CNT sodium metal anode. Upon cycling, the V₂CT_x/rGO-CNT electrode can yield a superior cycling life of more than 3000 h (2 mA cm^-2, 10 mAh cm^-2) with an average Coulombic efficiency of 99.54%. More attractively, it can even sustain a stable operation over 900 h at 5 mA cm^-2 with an ultrahigh areal capacity of 50 mAh cm^-2. In situ and ex situ characterizations and density functional theory simulation analyses prove that V₂CT_x with abundant sodiophilic functional groups can effectively guide the sodium metal nucleation and uniform deposition, thus enabling a dendrite-free morphology. Moreover, a full cell pairing a Na@V₂CT_x/rGO-CNT anode with a Na₃V₂(PO₄)₃@C-rGO cathode can deliver a high reversible capacity of 86.27 mAh g^-1 after 400 cycles at 100 mA g^-1. This work not only clarifies the superior Na deposition chemistry on the sodiophilic V₂CT_x/rGO-CNT microgrid aerogel electrode but also offers an approach for fabricating advanced Na metal anodes via a 3D printing method.

Surface Selenization Strategy for V2CTx MXene toward Superior Zn-Ion Storage

MXenes are promising cathode materials for aqueous zinc-ion batteries (AZIBs) owing to their layered structure, metallic conductivity, and hydrophilicity. However, they suffer from low capacities unless they are subjected to electrochemically induced second phase formation, which is tedious, time-consuming, and uncontrollable. Here we propose a facile one-step surface selenization strategy for realizing advanced MXene-based nanohybrids. Through the selenization process, the surface metal atoms of MXenes are converted to transition metal selenides (TMSes) exhibiting high capacity and excellent structural stability, whereas the inner layers of MXenes are purposely retained. This strategy is applicable to various MXenes, as demonstrated by the successful construction of VSe₂@V₂CT_x, TiSe₂@Ti₃C₂T_x, and NbSe₂@Nb₂CT_x. Typically, VSe₂@V₂CT_x delivers high-rate capability (132.7 mA h g^-1 at 2.0 A g^-1), long-term cyclability (93.1% capacity retention after 600 cycles at 2.0 A g^-1), and high capacitive contribution (85.7% at 2.0 mV s^-1). Detailed experimental and simulation results reveal that the superior Zn-ion storage is attributed to the engaging integration of V₂CT_x and VSe₂, which not only significantly improves the Zn-ion diffusion coefficient from 4.3 × 10^-15 to 3.7 × 10^-13 cm² s^-1 but also provides sufficient structural stability for long-term cycling. This study offers a facile approach for the development of high-performance MXene-based materials for advanced aqueous metal-ion batteries.

3D Printed Template-Assisted Assembly of Additive-Free Ti3C2Tx MXene Microlattices with Customized Structures toward High Areal Capacitance

Ti₃C₂T_x MXene is a promising material for electrodes in microsupercapacitors. Recent efforts have been made to fabricate MXene electrodes with designed structures using 3D printing to promote electrolyte permeation and ion diffusion. However, challenges remain in structural design diversity due to the strict ink rheology requirement and limited structure choices caused by existing extrusion-based 3D printing. Herein, additive-free 3D architected MXene aerogels are fabricated via a 3D printed template-assisted method that combines 3D printed hollow template and cation-induced gelation process. This method allows the use of MXene ink with a wide range of concentrations (5 to 150 mg mL^-1) to produce MXene aerogels with high structural freedom, fine feature size (>50 μm), and controllable density (3 to 140 mg cm^-3). Through structure optimization, the 3D MXene aerogel shows high areal capacitance of 7.5 F cm^-2 at 0.5 mA cm^-2 with a high mass loading of 54.1 mg cm^-2. It also exhibits an ultrahigh areal energy density of 0.38 mWh cm^-2 at a power density of 0.66 mW cm^-2.

Freestanding and Sandwich MXene-Based Cathode with Suppressed Lithium Polysulfides Shuttle for Flexible Lithium-Sulfur Batteries

Flexible lithium-sulfur (Li-S) batteries with high mechanical compliance and energy density are highly desired. This manuscript reported that large-area freestanding MXene (Ti₃C₂T_x) film has been obtained through a scalable drop-casting method, significantly improving adhesion to the sulfur layer under the continuously bent. Titanium oxide anchored on holey Ti₃C₂T_x (TiO₂/H-Ti₃C₂T_x) was also produced by the well-controlled oxidation of few-layer Ti₃C₂T_x, which greatly facilitates lithium ion transport as well as prevents the shuttling of lithium polysulfides. Therefore, the obtained sandwich electrode has demonstrated a high capacity of 740 mAh g^-1 at 2 C and a high capacity retention of 81% at 1 C after 500 cycles. Flexible Li-S batteries based on this sandwich electrode have a capacity retention as high as 95% after bending 500 times. This work provides effective design strategies of MXene for flexible batteries and wearable electronics.

2D metal carbides and nitrides (MXenes) for sensors and biosensors

MXenes are layered two-dimensional (2D) materials discovered in 2011 (Ti₃C₂X) and are otherwise called 2D transition metal carbides, carbonitrides, and nitrides. These 2D layered materials have been in the limelight for a decade due to their interesting properties such as large surface area, high ion transport, biocompatibility, and low diffusion barrier. Therefore, MXenes are widely preferred by researchers for applications in electronics, sensing, biosensing, electrocatalysis, super-capacitors and fuel cells. There are a number of methods available for the bulk synthesis of MXene-based nanomaterials. In addition, the possibility of structural modification as required and its outstanding surface chemistry offer a fascinating interface for the development of novel biosensors. In this review, we specifically discuss important MXene synthesis routes. Moreover, critical parameters such as surface functionalization that can dictate the mechanical, electronic, magnetic, and optical properties of MXenes are also discussed. Following this, methods available for the surface functionalization and modification strategies of MXenes are also discussed. Furthermore, the emergence of gas, electrochemical, and optical biosensors based on MXenes since its first report is discussed in detail. Finally, future directions of MXenes biosensors for critical applications are discussed.

Mildly Oxidized MXene (Ti3C2, Nb2C, and V2C) Electrocatalyst via a Generic Strategy Enables Longevous Li-O2 Battery under a High Rate

Lithium-oxygen batteries (LOBs) with ultrahigh theoretical energy density have emerged as one appealing candidate for next-generation energy storage devices. Unfortunately, some fundamental issues remain unsettled, involving large overpotential and inferior rate capability, mainly induced by the sluggish reaction kinetics and parasitic reactions at the cathode. Hence, the pursuit of suitable catalyst capable of efficiently catalyzing the oxygen redox reaction and eliminating the side-product generation, become urgent for the development of LOBs. Here, we report a universal synthesis approach to fabricate a suite of mildly oxidized MXenes (mo-Nb₂CT_x, mo-Ti₃C₂T_x, and mo-V₂CT_x) as cathode catalysts for LOBs. The readily prepared mo-MXenes possess expanded interlayer distance to accommodate massive Li₂O₂ formation, and in-situ-formed light metal oxide to enhance the electrocatalytic activity of MXenes. Taken together, the mo-V₂CT_x manages to deliver a high specific capacity of 22752 mAh g^-1 at a current density of 100 mA g^-1, and a long lifespan of 100 cycles at 500 mA g^-1. More impressively, LOBs with mo-V₂CT_x can continuously operate for 90, 89, and 70 cycles, respectively, under a high current density of 1000, 2000, and 3000 mA g^-1 with a cutoff capacity of 1000 mAh g^-1. The theoretical calculations further reveal the underlying mechanism lies in the optimized surface, where the overpotentials for the formation/decomposition of Li₂O₂ are significantly reduced and the catalytic kinetics is accelerated. This contribution offers a feasible strategy to prepare MXenes as efficient and robust electrocatalyst toward advanced LOBs and other energy storage devices.

Universal-Descriptors-Guided Design of Single Atom Catalysts toward Oxidation of Li2 S in Lithium-Sulfur Batteries

The sulfur redox kinetics critically matters to superior lithium-sulfur (Li-S) batteries, for which single atom catalysts (SACs) take effect on promoting Li2 S redox process and mitigating the shuttle behavior of lithium polysulfide (LiPs). However, conventional trial-and-error strategy significantly slows down the development of SACs in Li-S batteries. Here, the Li2 S oxidation processes over MN4 @G catalysts are fully explored and energy barrier of Li2 S decomposition (Eb ) is identified to correlate strongly with three parameters of energy difference between initial and final states of Li2 S decomposition, reaction energy of Li2 S oxidation and LiS bond strength. These three parameters can serve as efficient descriptors by which two excellent SACs of MoN4 @G and WN4 @G are screened which give rise to Eb values of 0.58 and 0.55 eV, respectively, outperforming other analogues in adsorbing LiPs and accelerating the redox kinetics of Li2 S. This method can be extended to a wider range of SACs by coupling MN4 moiety with heterostructures and heteroatoms beyond N where WN4 @G/TiS2 heterointerface is predicted to exhibit enhanced catalytic performance for Li2 S decomposition with Eb of 0.40 eV. This work will help accelerate the process of designing a wider range of efficient catalysts in Li-S batteries and even beyond, e.g. alkali-ion-Chalcogen batteries.

Three-Dimensional Engineering of Sulfur/MnO2 Composites for High-Rate Lithium-Sulfur Batteries

Herein, a three-dimensional interconnected sulfur (3DIS) system is used to construct a cathode of the lithium-sulfur battery. Compared with the traditional methods of encapsulating sulfur, the 3DIS system serves as a framework to grow MnO₂, which ensures a high sulfur content of 91.5 wt % (the ratio of sulfur/host was 10.8) and a uniform distribution of sulfur. Due to the synergistic effect of the 3D interconnected architecture and the uniform coating layer of polar MnO₂, 3DIS@MnO₂ (3DISMO) delivers a capacity of 891 mA h g^-1 after 900 cycles at 1 C. Even at a rate of 10 C, a capacity decay rate of 0.061% per cycle is achieved.

Layered Double Hydroxide Quantum Dots for Use in a Bifunctional Separator of Lithium-Sulfur Batteries

Functional separators, which are chemically modified and coated with nanostructured materials, are considered an effective and economical approach to suppressing the shuttle effect of lithium polysulfide (LiPS) and promoting the conversion kinetics of sulfur cathodes. Herein, we report cobalt-aluminum-layered double hydroxide quantum dots (LDH-QDs) deposited with nitrogen-doped graphene (NG) as a bifunctional separator for lithium-sulfur batteries (LSBs). The mesoporous LDH-QDs/NG hybrids possess abundant active sites of Co²⁺ and hydroxide groups, which result in capturing LiPSs through strong chemical interactions and accelerating the redox kinetics of the conversion reaction, as confirmed through X-ray photoelectron spectroscopy, adsorption tests, Li₂S nucleation tests, and electrokinetic analyses of the LiPS conversion. The resulting LDH-QDs/NG hybrid-coated polypropylene (LDH-QDs/NG/PP) separator, with an average thickness of ∼17 μm, has a high ionic conductivity of 2.67 mS cm^-1. Consequently, the LSB cells with the LDH-QDs/NG/PP separator can deliver a high discharge capacity of 1227.48 mAh g^-1 at 0.1C along with a low capacity decay rate of 0.041% per cycle over 1200 cycles at 1.0C.