Detection of Halomethanes Using Cesium Lead Halide Perovskite Nanocrystals

Dithiothreitol-functionalized perovskite-based visual sensing array capable of distinguishing food oils

At present, the combination of fingerprint recognition methods and environmentally friendly and economical analytical instruments is becoming increasingly important in the food industry. Herein, a dithiothreitol (DTT)-functionalized CsPbBr3-based colorimetric sensor array is developed for qualitatively differentiating multiple food oils. In this sensor array composition, two types of iodides (octadecylammonium iodide (ODAI) and ZnI2) are used as recognition elements, and CsPbBr3 is used as a signal probe for the sensor array. Different food oils oxidize iodides differently, resulting in different amounts of remaining iodides. Halogen ion exchange occurs between the remaining iodides and CsPbBr3, leading to different colors observed under ultraviolet light, enabling a unique fingerprint for each food oil. A total of five food oils exhibit their unique colorimetric array's response patterns and were successfully differentiated by linear discriminant analysis (LDA), realizing 100% classification accuracy.

Natural Deep Eutectic Solvents as Absorbing Solution and Preparation Solvent of Perovskite Nanocrystals Simultaneously for CH3I Gas Visual Sensing

Methyl iodide (CH3I) gas as a toxic gas causes great harm to organisms due to its high volatility and high reactivity with biological nucleophiles. Unfortunately, the sensing and detection of CH3I gas are challenging because of the diffusive nature of the gases and its low concentrations in the environment. Herein, we have developed a fast, green, and sensitive CH3I gas visual sensing method based on the capture technology of toxic gases by natural deep eutectic solvents (NADESs) coupled to the halide rapid exchange capability of perovskite nanocrystals (PNCs). In this strategy, NADESs are used as an absorption solution to adsorb gaseous CH3I, while simultaneously exposing I- through the action of the nucleophilic reagent; then, CsPbBr3 PNCs were synthesized in NADESs and used as sensing material to achieve I- exchange. Benefiting from the capture and enrichment of CH3I gas, the sensitivity of the gas sensor was highly improved. The sensor exhibited the lowest detection limit (limits of detection) of 164.15 μmol/m3, below the minimum safe level for human inhalation, which is 200 μmol/m3. This breakthrough offers greater possibilities for the quantitative detection of CH3I gas.

Solvent-tuned perovskite heterostructures enable visual linoleic acid assay and edible oil species discrimination via wavelength shift

Linoleic acid (LA) detection and edible oils discrimination are essential for food safety. Recently, CsPbBr3@SiO2 heterostructures have been widely applied in edible oil assays, while deep insights into solvent effects on their structure and performance are often overlooked. Based on the suitable polarity and viscosity of cyclohexane, we prepared CsPbBr3@SiO2 Janus nanoparticles (JNPs) with high stability in edible oil and fast halogen-exchange (FHE) efficiency with oleylammonium iodide (OLAI). LA is selectively oxidized by lipoxidase to yield hydroxylated derivative (oxLA) capable of reacting with OLAI, thereby bridging LA content to naked-eye fluorescence color changes through the anti-FHE reaction. The established method for LA in edible oils exhibited consistent results with GC-MS analysis (p > 0.05). Since the LA content difference between edible oils, we further utilized chemometrics to accurately distinguish (100%) the species of edible oils. Overall, such elaborated CsPbBr3@SiO2 JNPs enable a refreshing strategy for edible oil discrimination.

Sensing Utilities of Cesium Lead Halide Perovskites and Composites: A Comprehensive Review

Recently, the utilization of metal halide perovskites in sensing and their application in environmental studies have reached a new height. Among the different metal halide perovskites, cesium lead halide perovskites (CsPbX3; X = Cl, Br, and I) and composites have attracted great interest in sensing applications owing to their exceptional optoelectronic properties. Most CsPbX3 nanostructures and composites possess great structural stability, luminescence, and electrical properties for developing distinct optical and photonic devices. When exposed to light, heat, and water, CsPbX3 and composites can display stable sensing utilities. Many CsPbX3 and composites have been reported as probes in the detection of diverse analytes, such as metal ions, anions, important chemical species, humidity, temperature, radiation photodetection, and so forth. So far, the sensing studies of metal halide perovskites covering all metallic and organic-inorganic perovskites have already been reviewed in many studies. Nevertheless, a detailed review of the sensing utilities of CsPbX3 and composites could be helpful for researchers who are looking for innovative designs using these nanomaterials. Herein, we deliver a thorough review of the sensing utilities of CsPbX3 and composites, in the quantitation of metal ions, anions, chemicals, explosives, bioanalytes, pesticides, fungicides, cellular imaging, volatile organic compounds (VOCs), toxic gases, humidity, temperature, radiation, and photodetection. Furthermore, this review also covers the synthetic pathways, design requirements, advantages, limitations, and future directions for this material.

Selenium reduction pathways in the colloidal synthesis of CdSe nanoplatelets

Several established procedures are now available to prepare zinc blende CdSe nanoplatelets. While these protocols allow for detailed control over both thickness and lateral dimensions, the chemistry behind their formation is yet to be unraveled. In this work, we discuss the influence of the solvent on the synthesis of nanoplatelets. We confirmed that the presence of double bonds, as is the case for 1-octadecene, plays a key role in the evolution of nanoplatelets, through the isomerization of the alkene, as confirmed by nuclear magnetic resonance spectroscopy and mass spectrometry. Consequently, 1-octadecene can be replaced as a solvent (or solvent mixture), however, only by one that also contains α protons to CC double bonds. We confirm this via synthesis of nanoplatelets in hexadecane spiked with a small amount of 1-octadecene, and in the aromatic solvent 1,2,3,4-tetrahydronaphthalene (tetralin). At the same time, the chemical reaction leading to the formation of nanoplatelets occurs to some extent in saturated solvents. A closer examination revealed that an alternative formation pathway is possible, through interaction of carboxylic acids, such as octanoic acid, with selenium. Next to shedding more light on the synthesis of CdSe nanoplatelets, fundamental understanding of the precursor chemistry paves the way to use optimized solvent admixtures as an additional handle to control the nanoplatelet synthesis, as well as to reduce potential self-polymerization hurdles observed with 1-octadecene.

Synthesis of a water-stable fluorescence CsPbBr3 perovskite by dual-supersaturated recrystallization method and tuning the fluorescence spectrum for selective detection of folic acid

As an excellent fluorescent material, cesium lead halide perovskite nanocrystals (PNCs) is rarely used for analytical purposes because the PNCs are unstable in polar solvents, especially water. Developing a new synthesis method to prepare water-stable PNCs makes it promising for the detection of analytes in aqueous solutions. Herein, by using the solubility difference of the precursors in different solvents, we successfully synthesized water-stable CsPbBr3 PNCs by a dual-supersaturated recrystallization method at room temperature. We also found that the fluorescence of the as-prepared CsPbBr3 PNCs could be quenched by some small organic molecules, such as folic acid (FA) and dopamine (DA). By using a chloride-induced anion exchange reaction method, the fluorescence emission peak of the CsPbBr3 PNCs could be tuned from 518 to 418 nm and the emission color changed from green to blue. The blue emission chloride-exchanged PNCs have a good selectivity for only FA and a good linear relationship is established between the fluorescence quenching rate of the PNCs and concentration of FA from 10.0 to 140.0 μM, with a limit of detection (LOD) of 0.9 μM. This work expanded the applications of PNCs in the field of analytical chemistry and also proposed a new strategy for improving selectivity by tuning the emission spectrum of a fluorescent probe.

On-site portable detection of gaseous methyl iodide using an electrochemical method

We report an electrochemical device for portable on-site detection of gaseous CH3I based on PVIm-F for the first time. The device achieves detection of gaseous CH3I with a significant selectivity and a low detection limit (0.474 ppb) in 20 min at 50 °C and 50% relative humidity, which is of great significance for achieving real-time on-site monitoring of radioactive hazardous environments.

Trinity Strategy: Enabling Perovskite as Hydrophilic and Efficient Fluorescent Nanozyme for Constructing Biomarker Reporting Platform

Water instability and sensing homogeneity are the Achilles' heel of CsPbX3 NPs in biological fluids application. This work reports the preparation of Mn2+:CsPbCl3@SiO2 yolk-shell nanoparticles (YSNPs) in aqueous solutions created through the integration of ligand, surface, and crystal engineering strategies. The SN2 reaction between 4-chlorobutyric acid (CBA) and oleylamine (OAm) yields a zwitterionic ligand that facilitates the dispersion of YSNPs in water, while the robust SiO2 shell enhances their overall stability. Besides, Mn2+ doping in YSNPs not only introduces a second emission center but also enables potential postsynthetic designability, leading to the switching from YSNPs to MnO2@YSNPs with excellent oxidase (OXD)-like activity. Theoretical calculations reveal that electron transfer from CsPbCl3 to in situ MnO2 and the adsorption-desorption process of 3,3',5,5'-tetramethylbenzidine (TMB) synergistically amplify the OXD-like activity. In the presence of ascorbic acid (AA), Mn4+ in MnO2@YSNPs (fluorescent nanozyme) is reduced to Mn2+ and dissociated, thereby inhibiting the OXD-like activity and triggering fluorescence "turn-on/off", i.e., dual-mode recognition. Finally, a biomarker reporting platform based on MnO2@YSNPs fluorescent nanozyme is constructed with AA as the reporter molecule, and the accurate detection of human serum alkaline phosphatase (ALP) is realized, demonstrating the vast potential of perovskites in biosensing.

Using the Photoluminescence Color Change in Cesium Lead Iodide Nanoparticles to Monitor the Kinetics of an External Organohalide Chemical Reaction by Halide Exchange

In this work, we demonstrate a photoluminescence-based method to monitor the kinetics of an organohalide reaction by way of detecting released bromide ions at cesium lead halide nanoparticles. Small aliquots of the reaction are added to an assay with known concentrations of CsPbI3, and the resulting Br-to-I halide exchange (HE) results in rapid and sensitive wavelength blueshifts (Δλ) due to CsPbBrxI3-x intermediate concentrations, the wavelengths of which are proportional to concentrations. An assay response factor, C, relates Δλ to Br- concentration as a function of CsPbI3 concentration. The observed kinetics, as well as calculated rate constants, equilibrium, and activation energy of the solvolysis reaction tested correspond closely to synthetic literature values, validating the assay. Factors that influence the sensitivity and performance of the assay, such as CsPbI3 size, morphology, and concentration, are discussed.

Colorimetric Sensing of the Peroxide Number of Milk Powder Using CsPbBr3 Perovskite Nanocrystals

In this study, a wavelength-shift-based colorimetric sensing approach for the peroxide number of milk powder using CsPbBr₃ perovskite nanocrystals (CsPbBr₃ NCs) has been developed. Through the fat extraction, REDOX reactions and halogen exchange, as well as the optimized experimental conditions, a colorimetric sensing method was established to determine the peroxide number of milk powder samples. The integrated process of milk powder fat extraction and the REDOX process greatly shortened the determination time. This colorimetric method has a good linear correlation in the range of the peroxide number from 0.02 to 1.96 mmol/kg, and the detection limit was found to be 3 μmol/kg. This study further deepens the application prospect of wavelength-shift-based colorimetric sensing using CsPbBr₃ NCs.

Traffic light-type ratiometric fluorescence visual sensing of Cs+ in soybean oil based on dimension regulation of 2D perovskite nanosheets

Determination of cesium ion in soybean oil is of high importance since the increasing risk from releasing of main component of nuclear waste cesium 137. The complex composition and high viscosity of soybean oil make it necessary to convert it into water phase by nitration before detection, so developing a simple, accurate and sensitive method for on-site sensing of Cs⁺ in soybean oil is still a big challenge. In this work, we report a traffic light-type ratiometric fluorescence strategy for the visual sensing of Cs⁺ in soybean oil based on dimensional regulation of two dimensional (PEA)₂PbI₄ perovskite nanosheets (NSs). The PEA⁺ in (PEA)₂PbI₄ NSs exchanged with Cs⁺ and lead to dimension of partial (PEA)₂PbI₄ NSs progressively increase from 2D to 3D CsPbI₃ NCs. Resultantly, the fluorescence of (PEA)₂PbI₄ NSs decreases with a concomitant fluorescence enhancement of CsPbI₃ NCs upon increasing the concentrations of Cs⁺, and the emission accordingly change from green, yellow to red with a high fluorescence colorimetric resolution up to 5.0 μM, make it successful to achieve on-site sensing of Cs⁺ in soybean oil just with naked eye in 5 min without any nitration, demonstrating a bright application future for determination of Cs⁺ in the soybean oil.

Macroporous perovskite nanocrystal composites for ultrasensitive copper ion detection

Accumulation of heavy metal ions, including copper ions (Cu²⁺), presents a serious threat to human health and to the environment. A substantial amount of research has focused on detecting such species in aqueous solutions. However, progress towards ultrasensitive and easy-to-use sensors for non-aqueous solutions is still limited. Here, we focus on the detection of copper species in hexane, realising ultra-sensitive detection through a fluorescence-based approach. To achieve this, a novel macroporous composite material has been developed featuring luminescent CsPbBr₃ nanocrystals (NCs) chemically adhered to a polymerized high internal phase emulsion (polyHIPE) substrate through surface thiol groups. Due to this thiol functionality, sub-monolayer NC formation is realised, which also renders outstanding stability of the composite in the ambient environment. Copper detection is achieved through a direct solution based immersion of the CsPbBr₃-(SH)polyHIPE composite, which results in concentration-dependent quenching of the NC photoluminescence. This newly developed sensor has a limit of detection (LOD) for copper as low as 1 × 10^-16 M, and a wide operating window spanning 10^-2 to 10^-16 M. Moreover, the composite exhibits excellent selectivity among different transition metals.

Tailoring CsPbBr3 Growth via Non-Polar Solvent Choice and Heating Methods

This study describes an investigation of the role of non-polar solvents on the growth of cesium lead halide (CsPbX₃ X = Br and I) nanoplatelets. We employed two solvents, benzyl ether (BE) and 1-octadecene (ODE), as well as two nucleation and growth mechanisms, one-pot, facilitated by microwave irradiation (MWI)-based heating, and hot-injection, using convection. Using BE and MWI, large mesoscale CsPbBr₃ nanoplatelets were produced, whereas use of ODE produced small crystallites. Differences between the products were observed by optical spectroscopies, which showed first band edge absorptions consistent with thicknesses of ∼9 nm [∼15 monolayer (ML)] for the BE-CsPbBr₃ and ∼5 nm (∼9 ML) for ODE-CsPbBr₃. Both products had orthorhombic crystal structures, with the BE-CsPbBr₃ revealing significant preferred orientation diffraction signals consistent with the asymmetric and two-dimensional platelet morphology. The differences in the final morphology were also observed for products formed via hot injection, with BE-CsPbBr₃ showing thinner square platelets with thicknesses of ∼2 ML and ODE-CsPbBr₃ showing similar morphologies and small crystallite sizes. To understand the role solvent plays in crystal growth, we studied lead plumbate precursor (PbBr_n^2-n) formation in both solvents, as well as solvent plus ligand solutions. The findings suggest that BE dissolves PbBr₂ salts to a higher degree than ODE, and that this BE to precursor affinity persists during growth.

Colorimetric paper test strips based on cesium lead bromide perovskite nanocrystals for rapid detection of ciprofloxacin hydrochloride

The detection of drugs containing hydrochloric salt with conventional methods is time consuming and expensive. In this work, upon exposure to ciprofloxacin hydrochloride at different concentrations, the emission from CsPbBr₃NCs shifts to the blue from 513 nm to 442 nm. CsPbBr_(3-x)Cl_xNCs are formed by the ion exchange and substitution of Br^-and Cl^-ions from surface to core of NCs. The first-principles calculations suggest that the substitution of Br^-by Cl^-ions plays a critical role in the tuning of the energy bandgap. The color of paper test strips changes immediately after exposure to different Ciproxan solutions. We propose that this rapid and portable method has a high potential application in other chloride salts for food safety.

Ultrasensitive Temperature Sensing Based on Ligand-Free Alloyed CsPbClx Br3-x Perovskite Nanocrystals Confined in Hollow Mesoporous Silica with High Density of Halide Vacancies

Temperature sensing based on fluorescent semiconductor nanocrystals has recently received immense attention. Enhancing the trap-facilitated thermal quenching of the fluorescence should be an effective approach to achieve high sensitivity for temperature sensing. Compared with conventional semiconductor nanocrystals, the defect-tolerant feature of lead halide perovskite nanocrystals (LHP NCs) endows them with high density of defects. Here, hollow mesoporous silica (h-SiO₂ ) template-assisted ligand-free synthesis and halogen manipulation (chloride-importing) are proposed to fabricate highly defective yet fluorescent CsPbCl_1.2 Br_1.8 NCs confined in h-SiO₂ (CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ ) for ultrasensitive temperature sensing. The trap barrier heights, exciton-phonon scattering, and trap state filling process in the CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ and CsPbBr₃ NCs@h-SiO₂ are studied to illustrate the higher temperature sensitivity of CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ at physiological temperature range. By integrating the thermal-sensitive CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ and thermal-insensitive K₂ SiF₆ :Mn⁴⁺ phosphor into the flexible ethylene-vinyl acetate polymer matrix, ratiometric temperature sensing from 30.0 °C to 45.0 °C is demonstrated with a relative temperature sensitivity up to 13.44% °C^-1 at 37.0 °C. The composite film shows high potential as a thermometer for monitoring the body temperature. This work demonstrates the unparalleled temperature sensing performance of LHP NCs and provides new inspiration on switching the defects into advantages in sensing applications.

A Perovskite-Based Paper Microfluidic Sensor for Haloalkane Assays

Detection of haloalkanes is of great industrial and scientific importance because some haloalkanes are found serious biological and atmospheric issues. The development of a flexible, wearable sensing device for haloalkane assays is highly desired. Here, we develop a paper-based microfluidic sensor to achieve low-cost, high-throughput, and convenient detection of haloalkanes using perovskite nanocrystals as a nanoprobe through anion exchanging. We demonstrate that the CsPbX₃ (X = Cl, Br, or I) nanocrystals are selectively and sensitively in response to haloalkanes (CH₂Cl₂, CH₂Br₂), and their concentrations can be determined as a function of photoluminescence spectral shifts of perovskite nanocrystals. In particular, an addition of nucleophilic trialkyl phosphines (TOP) or a UV-photon-induced electron transfer from CsPbX₃ nanocrystals is responsible for achieving fast sensing of haloalkanes. We further fabricate a paper-based multichannel microfluidic sensor to implement fast colorimetric assays of CH₂Cl₂ and CH₂Br₂. We also demonstrate a direct experimental observation on chemical kinetics of anion exchanging in lead-halide perovskite nanocrystals using a slow solvent diffusion strategy. Our studies may offer an opportunity to develop flexible, wearable microfluidic sensors for haloalkane sensing, and advance the in-depth fundamental understanding of the physical origin of anion-exchanged nanocrystals.