Scalable and Controllable Synthesis of Interface-Engineered Nanoporous Host for Dendrite-Free and High Rate Zinc Metal Batteries

Promoting Electrocatalytic Oxygen Reactions Using Advanced Heterostructures for Rechargeable Zinc-Air Battery Applications

In order to facilitate electrochemical oxygen reactions in electrically rechargeable zinc-air batteries (ZABs), there is a need to develop innovative approaches for efficient oxygen electrocatalysts. Due to their reliability, high energy density, material abundance, and ecofriendliness, rechargeable ZABs hold promise as next-generation energy storage and conversion devices. However, the large-scale application of ZABs is currently hindered by the slow kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). However, the development of heterostructure-based electrocatalysts has the potential to surpass the limitations imposed by the intrinsic properties of a single material. This Account begins with an explanation of the configurations of ZABs and the fundamentals of the oxygen electrochemistry of the air electrode. Then, we summarize recent progress with respect to the variety of heterostructures that exploit bifunctional electrocatalytic reactions and overview their impact on ZAB performance. The range of heterointerfacial engineering strategies for improving the ORR/OER and ZAB performance includes tailoring the surface chemistry, dimensionality of catalysts, interfacial charge transfer, mass and charge transport, and morphology. We highlight the multicomponent design approaches that take these features into account to create advanced highly active bifunctional catalysts. Finally, we discuss the challenges and future perspectives on this important topic that aim to enhance the bifunctional activity and performance of zinc-air batteries.

In Situ Spontaneous Construction of Zinc Phosphate Coating Layer Toward Highly Reversible Zinc Metal Anodes

Aqueous zinc ion batteries have received widespread attention due to their merits of high safety, high theoretical specific capacity, low cost, and environmental benignity. Nevertheless, the irreversible issues of Zn anode deriving from side reactions and dendrite growth have hindered its commercialization in large-scale energy storage systems. Herein, a zinc phosphate tetrahydrate (Zn3(PO4)2·4H2O, ZnPO) coating layer is in situ formed on the bare Zn by spontaneous redox reactions at room temperature to tackle the above issues. Particularly, the dense and brick-like ZnPO layer can effectively separate the anode surface from the aqueous electrolyte, thus suppressing the serious side reactions. Moreover, the ZnPO layer with high ionic conductivity, high Zn2+ transference number, and low nucleation barrier permits rapid Zn2+ transport and enables uniform Zn deposition, ensuring dendrite-free Zn deposition. As a result, the ZnPO@Zn symmetric battery achieves a high Coulombic efficiency of 99.8% and displays ultrahigh cycle stability over 6000 h (> 8 months), far surpassing its counterparts. Furthermore, the ZnPO@Zn||MnO2 full battery exhibits excellent electrochemical performances. Therefore, this work provides a new reference for simple and large-scale preparation of highly reversible Zn metal anodes, and has great potential for practical applications.

3D Porous Fibers with Spatial Traps and Excellent Zn2+ Transport Kinetics Enable Stable Zn-Based Aqueous Battery

Adverse side reactions and uncontrolled Zn dendrites growth are the dominant factors that have restricted the application of Zn ion batteries. Herein, a 3D self-supporting porous carbon fibers (denoted as PCFs) host is developed with "trap" effect to adjust the Zn deposition. The unique open structural design of N-doped carbon can act as the zincophilic sites to induce uniform deposition and inhibit adverse side reactions. More importantly, the porous hollow PCFs host with "trap" effect can induce Zn deposition in the fiber by adjusting the local electric field and current density, thereby increasing the specific energy density of the battery and inhibiting dendrite growth. In addition, the 3D open frameworks can regulate Zn2+ flux to enable outstanding cycling performance at ultra-high current densities. As expected, the PCFs framework guarantees the uniform Zn plating and stripping with an outstanding stability over 6000 cycles at the current density of 40 mA cm-2. And the Zn@PCFs||MnO2 full battery shows an excellent lifespan over 1300 cycles at 2000 mA g-1.

Advances of Nanomaterials for High-Efficiency Zn Metal Anodes in Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) have emerged as one of the most promising candidates for next-generation energy storage devices due to their outstanding safety, cost-effectiveness, and environmental friendliness. However, the practical application of zinc metal anodes (ZMAs) faces significant challenges, such as dendrite growth, hydrogen evolution reaction, corrosion, and passivation. Fortunately, the rapid rise of nanomaterials has inspired solutions for addressing these issues associated with ZMAs. Nanomaterials with unique structural features and multifunctionality can be employed to modify ZMAs, effectively enhancing their interfacial stability and cycling reversibility. Herein, an overview of the failure mechanisms of ZMAs is presented, and the latest research progress of nanomaterials in protecting ZMAs is comprehensively summarized, including electrode structures, interfacial layers, electrolytes, and separators. Finally, a brief summary and optimistic perspective are given on the development of nanomaterials for ZMAs. This review provides a valuable reference for the rational design of efficient ZMAs and the promotion of large-scale application of AZIBs.

Design Strategies toward High-Performance Zn Metal Anode

Rechargeable aqueous Zn-ion batteries (AZIBs) are one of the most promising alternatives for traditional energy-storage devices because of their low cost, abundant resources, environmental friendliness, and inherent safety. However, several detrimental issues with Zn metal anodes including Zn dendrite formation, hydrogen evolution, corrosion and passivation, should be considered when designing advanced AZIBs. Moreover, these thorny issues are not independent but mutually reinforcing, covering many technical and processing parameters. Therefore, it is necessary to comprehensively summarize the issues facing Zn anodes and the corresponding strategies to develop roadmaps for the development of high-performance Zn anodes. Herein, the failure mechanisms of Zn anodes and their corresponding impacts are outlined. Recent progress on improving the stability of Zn anode is summarized, including structurally designed Zn anodes, Zn alloy anodes, surface modification, electrolyte optimization, and separator design. Finally, this review provides brilliant and insightful perspectives for stable Zn metal anodes and promotes the large-scale application of AZIBs in power grid systems.

Stabilizing Zn anode for high-performance Zn-Ni battery through a complexing agent electrolyte addition

Zn-Ni batteries have garnered considerable attention due to their high specific energy, consistent discharge voltage, favorable performance at low temperatures, and environmentally benign nature. Nevertheless, anode interface issues such as dendrite growth, hydrogen evolution, and interfacial side reactions lead to poor cycling stability of Zn-Ni batteries, significantly limiting their further commercial applications. In this study, we propose a facile electrolyte engineering strategy to optimize the Zn anode interfacial environment and stabilize the Zn anode by introducing tannic acid (TA) into the KOH electrolyte. The incorporated TA complexing agent addition will be used to prevent the direct contact of H2O with the anode surface and promote the desolvation of Zn2+ through complexation, thus suppressing the interfacial corrosion. Consequently, the Zn symmetric battery using TA electrolyte cycles stably for 178 h at 1 mA cm-2. The Zn-Ni full batteries with TA electrolyte maintain 98.08 % capacity retention after 2000 cycles at 20C. This study will be of immediate benefit in commercializing large-scale, practical energy storage applications.

Insights into Nano- and Micro-Structured Scaffolds for Advanced Electrochemical Energy Storage

Adopting a nano- and micro-structuring approach to fully unleashing the genuine potential of electrode active material benefits in-depth understandings and research progress toward higher energy density electrochemical energy storage devices at all technology readiness levels. Due to various challenging issues, especially limited stability, nano- and micro-structured (NMS) electrodes undergo fast electrochemical performance degradation. The emerging NMS scaffold design is a pivotal aspect of many electrodes as it endows them with both robustness and electrochemical performance enhancement, even though it only occupies complementary and facilitating components for the main mechanism. However, extensive efforts are urgently needed toward optimizing the stereoscopic geometrical design of NMS scaffolds to minimize the volume ratio and maximize their functionality to fulfill the ever-increasing dependency and desire for energy power source supplies. This review will aim at highlighting these NMS scaffold design strategies, summarizing their corresponding strengths and challenges, and thereby outlining the potential solutions to resolve these challenges, design principles, and key perspectives for future research in this field. Therefore, this review will be one of the earliest reviews from this viewpoint.

Manipulating Zn Metal Texture with Guided Zincophilic Sites via Electrochemical Stripping for Dendrite-Free Zn Anodes

Constructing a three-dimensional (3D) structure along with Zn (002) texture selective exposure is a promising strategy to tackle the issues faced by Zn metal anodes. Herein, for the first time, we proposed an electrochemical stripping strategy to achieve controlled modification of the texture and microstructure of zinc foils in one step, building a hierarchical structure with (002) texture preferred exposed Zn (SZ). The SZ with favorable zincophilic properties not only can reduce the concentration polarization at the interface but also allow Zn to grow horizontally on the edge of the (002) texture by guiding the adsorption sites for Zn2+. Moreover, the honeycomb-like structure is beneficial to rearrange the distribution of the Zn2+ flux as well as alleviating stress changes during cycling. Thus, the SZ||Cu cell exhibits excellent stability with a Coulombic efficiency of 99.76% over 1800 cycles. The SZ||NaV3O8·xH2O cell with inconspicuous self-discharge effect maintains a high areal capacity of 3.67 mA h cm-2 even after 700 cycles with a low N/P ratio of 3.6. This work achieves texture architecture and structure designing on Zn foils simultaneously by metallurgical electrochemical methods and opens up a potential strategy to implement the practicality of zinc metal anodes.

Surface Patterning of Metal Zinc Electrode with an In-Region Zincophilic Interface for High-Rate and Long-Cycle-Life Zinc Metal Anode

The undesirable dendrite growth induced by non-planar zinc (Zn) deposition and low Coulombic efficiency resulting from severe side reactions have been long-standing challenges for metallic Zn anodes and substantially impede the practical application of rechargeable aqueous Zn metal batteries (ZMBs). Herein, we present a strategy for achieving a high-rate and long-cycle-life Zn metal anode by patterning Zn foil surfaces and endowing a Zn-Indium (Zn-In) interface in the microchannels. The accumulation of electrons in the microchannel and the zincophilicity of the Zn-In interface promote preferential heteroepitaxial Zn deposition in the microchannel region and enhance the tolerance of the electrode at high current densities. Meanwhile, electron aggregation accelerates the dissolution of non-(002) plane Zn atoms on the array surface, thereby directing the subsequent homoepitaxial Zn deposition on the array surface. Consequently, the planar dendrite-free Zn deposition and long-term cycling stability are achieved (5,050 h at 10.0 mA cm-2 and 27,000 cycles at 20.0 mA cm-2). Furthermore, a Zn/I2 full cell assembled by pairing with such an anode can maintain good stability for 3,500 cycles at 5.0 C, demonstrating the application potential of the as-prepared ZnIn anode for high-performance aqueous ZMBs.

Design Strategies for Aqueous Zinc Metal Batteries with High Zinc Utilization: From Metal Anodes to Anode-Free Structures

Aqueous zinc metal batteries (AZMBs) are promising candidates for next-generation energy storage due to the excellent safety, environmental friendliness, natural abundance, high theoretical specific capacity, and low redox potential of zinc (Zn) metal. However, several issues such as dendrite formation, hydrogen evolution, corrosion, and passivation of Zn metal anodes cause irreversible loss of the active materials. To solve these issues, researchers often use large amounts of excess Zn to ensure a continuous supply of active materials for Zn anodes. This leads to the ultralow utilization of Zn anodes and squanders the high energy density of AZMBs. Herein, the design strategies for AZMBs with high Zn utilization are discussed in depth, from utilizing thinner Zn foils to constructing anode-free structures with theoretical Zn utilization of 100%, which provides comprehensive guidelines for further research. Representative methods for calculating the depth of discharge of Zn anodes with different structures are first summarized. The reasonable modification strategies of Zn foil anodes, current collectors with pre-deposited Zn, and anode-free aqueous Zn metal batteries (AF-AZMBs) to improve Zn utilization are then detailed. In particular, the working mechanism of AF-AZMBs is systematically introduced. Finally, the challenges and perspectives for constructing high-utilization Zn anodes are presented.

Selective Shielding of the (002) Plane Enabling Vertically Oriented Zinc Plating for Dendrite-Free Zinc Anode

Uncontrolled growth of Zn dendrites hinders the future development of aqueous Zn-ion batteries. Despite that the (100) plane possesses better zincophilic ability and fast kinetics, dendrites are generally suppressed via (002) plane-oriented Zn deposition in previous reports; the ordered (100) plane-dominant Zn deposition, especially under high current density has not yet been realized. Herein, vertically-oriented Zn plating with preferential growth of (100) plane is reported using disodium lauryl phosphate (DLP) as an electrolyte additive. DLP is preferentially anchored on the Zn (002) crystal plane via the polar phosphate group, then the deposition of Zn atoms on the (002) plane is retarded by the long alkyl chain, finally promoting the preferred growth of the (100) plane. This unique growth pattern results in ultrastable Zn plating/stripping at a super-high current density of 50 mA cm-2 , with a cumulative capacity of 8500 mAh cm-2 . The Zn//Zn symmetric cell also cycles steadily for 700 h with a large areal capacity of 10 mAh cm-2 at a current density of 10 mA cm-2 . This study provides new insights into the realization of dendrite-free Zn anodes by crystal plane modulation.

3D hierarchically fractal structure stabilized anode for achieving long-term cycle life of aqueous Zn-ion batteries

The cycling stability of aqueous Zn-ion battery (AZIB) is a serious issue for their successful application, mainly due to the considerable growth of Zn dendrites and the existence of side effects during operation. Herein, the hierarchically three-dimensional (3D) fractal structure of the ZnO/Zn/CuxO@Cu (ZZCC) anode is prepared by a two-step process, where CuxO nanowires are prepared on Cu foam by thermal oxidation method and Zn layer and ZnO surface are formed by plating. This fractal structure increases the electrodynamic surfaces and reduces the local current density, which can regulate Zn plating and inhibit dendritic growth and side effects. Apparently, the symmetric ZZCC-based cell shows a long-term operation time of 3000 h at 1 mA cm-2 with 1 mAh cm-2, and an operation time of more than 1000 h with a discharge depth of 15.94%. Compared with the bare Zn foil anode, the AZIB assembled with the composite of Mn-doped vanadium oxide and reduced graphene oxide cathode and ZZCC anode (MnVO@rGO//ZZCC) exhibits significantly improved cyclability (i.e. with 88.5% capacity retention) and achieves a Coulomb efficiency of 99.4% at 2 A g-1. This hierarchically 3D structure strategy to design anodes with superior cyclic stability contributes to the next generation of secure energy.

Highly Reversible Zn Anodes Achieved by Enhancing Ion-Transport Kinetics and Modulating Zn (002) Deposition

Uncontrolled dendrite growth and water-related side reactions in mild electrolytes are the main causes of poor cycling stability of zinc anodes, resulting in the deterioration of aqueous zinc-based batteries. Herein, a multifunctional fluorapatite (Ca5(PO4)3F) aerogel (FAG) interface layer is proposed to realize highly stable zinc anodes via the integrated regulation of Zn2+ migration kinetics and Zn (002) orientation deposition. Owing to the well-defined aerogel nanochannels and the rich Zn2+ adsorption sites resulting from the ion exchange between Ca2+ and Zn2+, the FAG interface layer could significantly accelerate the Zn2+ migration and effectively homogenize the Zn2+ flux and nucleation sites, thus promoting rapid and uniform Zn2+ migration at the electrode/electrolyte interface. Additionally, during the cycling process, the F atoms from FAG promote the in situ generation of ZnF2, which facilitates the manipulation of the preferred Zn (002) orientation deposition, thus efficiently suppressing dendrite growth and side reactions by combining with the above synergistic effects. Consequently, the FAG-modified Zn anode displays a stable cycle life of over 4000 h at 1 mA cm-2 and exhibits highly reversible Zn plating/stripping behavior. Meanwhile, the Zn||MnO2 full cells exhibit improved cycle stability over 2000 cycles compared with that of the bare Zn, highlighting the virtues of the FAG protective layer for highly reversible Zn anodes. Our work brings the insight in to stabilize Zn anodes and power the commercial applications of aqueous zinc-based batteries.

Structure-Controlled Carbon Hosts for Dendrite-Free Aqueous Zinc Batteries

The surging demand for environmental-friendly and safe electrochemical energy storage systems has driven the development of aqueous zinc (Zn)-ion batteries (ZIBs). However, metallic Zn anodes suffer from severe dendrite growth and large volume change, resulting in a limited lifetime for aqueous ZIB applications. Here, it is shown that 3D mesoporous carbon (MC) with controlled carbon and defect configurations can function as a highly reversible and dendrite-free Zn host, enabling the stable operation of aqueous ZIBs. The MC host has a structure-controlled architecture that contains optimal sp2 -carbon and defect sites, which results in an improved initial nucleation energy barrier and promotes uniform Zn deposition. As a consequence, the MC host shows outstanding Zn plating/stripping performance over 1000 cycles at 2 mA cm-2 and over 250 cycles at 6 mA cm-2 in asymmetric cells. Density functional theory calculations further reveal the role of the defective sp2 -carbon surface in Zn adsorption energy. Moreover, a full cell based on Zn@MC900 anode and V2 O5 cathode exhibits remarkable rate performance and cycling stability over 3500 cycles. These results establish a structure-mechanism-performance relationship of the carbon host as a highly reversible Zn anode for the reliable operation of ZIBs.

Polyanion-Type Na3 V2 (PO4 )2 F3 @rGO with High-Voltage and Ultralong-Life for Aqueous Zinc Ion Batteries

Aqueous zinc ion batteries (AZIBs) have attracted much interest in the next generation of energy storage devices because of their elevated safety and inexpensive price. Polyanionic materials have been considered as underlying cathodes owing to the high voltage, large ionic channels and fast ionic kinetics. However, the low electronic conductivity limits their cycling stability and rate performance. Herein, mesoporous Na₃ V₂ (PO₄ )₂ F₃ (N3VPF) nanocuboids with the size of 80-220 nm cladded by reduced graphene oxide (rGO) have been successfully prepared to form 3D composite (N3VPF@rGO) by a novel and fast microwave hydrothermal with subsequent calcination strategy. The enhanced conductivity, strengthened pseudocapacitive behaviors, enlarged D_Zn ²⁺ , and stable structure guarantee N3VPF@rGO with splendid Zn²⁺ storage performance, such as high capacity of 126.9 mAh g^-1 at 0.5 C (1 C = 128 mA g^-1 ), high redox potentials at 1.48/1.57 V, high rate capacity of 93.9 mAh g^-1 at 20 C (short charging time of 3 mins) and extreme cycling stability with capacity decay of 0.0074% per cycle after 5000 cycles at 15 C. The soft package batteries also present preeminent performance, demonstrating the practical application values. In situ X-ray diffraction, ex situ transmission electron microscopy and X-ray photoelectron spectroscopy reveal a reversible Zn²⁺ insertion/extraction mechanism.

Gradient design of imprinted anode for stable Zn-ion batteries

Achieving long-term stable zinc anodes at high currents/capacities remains a great challenge for practical rechargeable zinc-ion batteries. Herein, we report an imprinted gradient zinc electrode that integrates gradient conductivity and hydrophilicity for long-term dendrite-free zinc-ion batteries. The gradient design not only effectively prohibits side reactions between the electrolyte and the zinc anode, but also synergistically optimizes electric field distribution, zinc ion flux and local current density, which induces preferentially deposited zinc in the bottom of the microchannels and suppresses dendrite growth even under high current densities/capacities. As a result, the imprinted gradient zinc anode can be stably cycled for 200 h at a high current density/capacity of 10 mA cm^-2/10 mAh cm^-2, with a high cumulative capacity of 1000 mAh cm^-2, which outperforms the none-gradient counterparts and bare zinc. The imprinted gradient design can be easily scaled up, and a high-performance large-area pouch cell (4*5 cm²) is also demonstrated.

Zincophilic Electrode Interphase with Appended Proton Reservoir Ability Stabilizes Zn Metal Anodes

The rampant dendrites and hydrogen evolution reaction (HER) resulting from the turbulent interfacial evolution at the anode/electrolyte are the main culprits of short lifespan and low Coulombic efficiency of Zn metal batteries. In this work, a versatile protective coating with excellent zincophilic and amphoteric features is constructed on the surface of Zn metal (ZP@Zn) as dendrite-free anodes. This kind of protective coating possesses the advantages of reversible proton storage and rapid desolvation kinetics, thereby mitigating the HER and facilitating homogeneous nucleation concomitantly. Furthermore, the space charge polarization effect promotes charge redistribution to achieve uniform Zn deposition. Accordingly, the ZP@Zn symmetric cell manifests excellent reversibility at an ultrahigh cumulative plating capacity of 4700 mAh cm^-2 and stable cycling at 80 % depth of discharge (DOD). The ZP@Zn//V₆ O₁₃ pouch cell also reveals superior cycling stability with a high capacity of 326.6 mAh g^-1 .

Constructing robust heterostructured interface for anode-free zinc batteries with ultrahigh capacities

The development of Zn-free anodes to inhibit Zn dendrite formation and modulate high-capacity Zn batteries is highly applauded yet very challenging. Here, we design a robust two-dimensional antimony/antimony-zinc alloy heterostructured interface to regulate Zn plating. Benefiting from the stronger adsorption and homogeneous electric field distribution of the Sb/Sb₂Zn₃-heterostructured interface in Zn plating, the Zn anode enables an ultrahigh areal capacity of 200 mAh cm^-2 with an overpotential of 112 mV and a Coulombic efficiency of 98.5%. An anode-free Zn-Br₂ battery using the Sb/Sb₂Zn₃-heterostructured interface@Cu anode shows an attractive energy density of 274 Wh kg^-1 with a practical pouch cell energy density of 62 Wh kg^-1. The scaled-up Zn-Br₂ battery in a capacity of 500 mAh exhibits over 400 stable cycles. Further, the Zn-Br₂ battery module in an energy of 9 Wh (6 V, 1.5 Ah) is integrated with a photovoltaic panel to demonstrate the practical renewable energy storage capabilities. Our superior anode-free Zn batteries enabled by the heterostructured interface enlighten an arena towards large-scale energy storage applications.

Revitalizing zinc-ion batteries with advanced zinc anode design

Rechargeable aqueous zinc-ion batteries (AZIBs) have attracted significant attention in large-scale energy storage systems due to their unique merits, such as intrinsic safety, low cost, and relatively high theoretical energy density. However, the dilemma of the uncontrollable Zn dendrites, severe hydrogen evolution reaction (HER), and side reactions that occur on the Zn anodes have hindered their commercialization. Herein, a state-of-the-art review of the rational design of highly reversible Zn anodes for high-performance AZIBs is provided. Firstly, the fundamental understanding of Zn deposition, with regard to the nucleation, electro-crystallization, and growth of the Zn nucleus is systematically clarified. Subsequently, a comprehensive survey of the critical factors influencing Zn plating together with the current main challenges is presented. Accordingly, the rational strategies emphasizing structural design, interface engineering, and electrolyte optimization have been summarized and analyzed in detail. Finally, future perspectives on the remaining challenges are recommended, and this review is expected to shed light on the future development of stable Zn anodes toward high-performance AZIBs.

Solid Electrolyte Interface in Zn-Based Battery Systems

Due to its high theoretical capacity (820 mAh g^-1), low standard electrode potential (- 0.76 V vs. SHE), excellent stability in aqueous solutions, low cost, environmental friendliness and intrinsically high safety, zinc (Zn)-based batteries have attracted much attention in developing new energy storage devices. In Zn battery system, the battery performance is significantly affected by the solid electrolyte interface (SEI), which is controlled by electrode and electrolyte, and attracts dendrite growth, electrochemical stability window range, metallic Zn anode corrosion and passivation, and electrolyte mutations. Therefore, the design of SEI is decisive for the overall performance of Zn battery systems. This paper summarizes the formation mechanism, the types and characteristics, and the characterization techniques associated with SEI. Meanwhile, we analyze the influence of SEI on battery performance, and put forward the design strategies of SEI. Finally, the future research of SEI in Zn battery system is prospected to seize the nature of SEI, improve the battery performance and promote the large-scale application.

Chaotropic Polymer Additive with Ion Transport Tunnel Enable Dendrite-Free Zinc Battery

Zn batteries are considered the new-generation candidate for large-scale energy storage systems, taking both safety and environmental problems into account. They are still restricted by unexpected dendrite/byproducts occurring on the Zn anodes. We hereby screen a powerful polymer type additive, hyaluronic acid (HA), to regulate the typical ZnSO₄ electrolyte for obtaining dendrite-free Zn ion batteries. The intrinsically chaotropic property of the HA molecule can efficiently destruct the original hydrogen-bonds from H₂O-H₂O, thus restricting the common parasitic reactions derived from the large amount of active water molecules. Simultaneously, the abundant functional groups along the long chain from HA additives can construct an effective tunnel for transferring Zn²⁺ smoothly, enabling an obviously improved Zn ion transference number of 0.62. Owning to the above intriguing mechanism for regulating the solvation structure of electrolyte systems, the HA additives can greatly increase the cycling life of Zn-Zn symmetric cells to 2200 and 800 h under the conditions of 1 mA cm^-2/1 mAh cm^-2 and 5 mA cm^-2/5 mAh cm^-2, respectively. Modified performance for both Zn-Ti and Zn-MnO₂ can all be realized by this valid additive, elucidating it can be potentially utilized in large-scale Zn based aqueous energy storage devices.

An Ultrahigh Rate and Stable Zinc Anode by Facet-Matching-Induced Dendrite Regulation

Resource-abundant metal (e.g., zinc) batteries feature intrinsic advantages of safety and sustainability. Their practical feasibility, however, is impeded by the poor reversibility of metal anodes, typically caused by the uncontrollable dendrite enlargement. Significant effort is exerted to completely prevent dendrites from forming, but this seems less effective at high current densities. Herein, this work presents an alternative dendrite regulation strategy of forming tiny, homogeneously distributed, and identical zinc dendrites by facet matching, which effectively avoids undesirable dendrite enlargement. Confirmed by multiscale theoretical screening and characterization, the regularly exposed Cu(111) facets at the ridges of a copper nanowire are capable of such dendrite regulation by forming a low-mismatched Zn(002)/Cu(111) interface. Consequently, reversible zinc electroplating/stripping is achieved at an unprecedentedly high rate of 100 mA cm^-2 for over 30 000 cycles, corresponding to an accumulative areal capacity up to 30 Ah cm^-2 . A full cell using this anode shows a high capacity of 308.3 mAh g^-1 and a high capacity retention of 91.4% after 800 cycles. This strategy is also viable for magnesium and aluminum anodes, thus opening up a promising and universal avenue toward long-life and high-rate metal anodes.

A Review on 3D Zinc Anodes for Zinc Ion Batteries

Zinc ion batteries (ZIBs) have been gradually developed in recent years due to their abundant resources, low cost, and environmental friendliness. Therefore, ZIBs have received a great deal of attention from researchers, which are considered as the next generation of portable energy storage systems. However, poor overall performance of ZIBs restricts their development, which is attributed to zinc dendrites and a series of side reactions. Constructing 3D zinc anodes has proven to be an effective way to significantly improve their electrochemical performance. In this review, the challenges of zinc anodes in ZIBs, including zinc dendrites, hydrogen evolution and corrosion, as well as passivation, are comprehensively summarized and the energy storage mechanisms of the zinc anodes and 3D zinc anodes are discussed. 3D zinc anodes with different structures including fiberous, porous, ridge-like structures, plated zinc anodes on different substrates and other 3D zinc anodes, are subsequently discussed in detail. Finally, emerging opportunities and perspectives on the material design of 3D zinc anodes are highlighted and challenges that need to be solved in future practical applications are discussed, hopefully illuminating the way forward for the development of ZIBs.

In Situ Construction of Protective Films on Zn Metal Anodes via Natural Protein Additives Enabling High-Performance Zinc Ion Batteries

The strong activity of water molecules causes a series of parasitic side reactions on Zn anodes in the aqueous electrolytes. Herein, we introduce silk fibroin (SF) as a multifunctional electrolyte additive for aqueous zinc-ion (Zn-ion) batteries. The secondary structure transformation of SF molecules from α-helices to random coils in the aqueous electrolytes allows them to break the hydrogen bond network among free water molecules and participate in Zn²⁺ ion solvation structure. The SF molecules released from the [Zn(H₂O)₄(SF)]²⁺ solvation sheath appear to be gradually adsorbed on the surface of Zn anodes and in situ form a hydrostable and self-healable protective film. This SF-based protective film not only shows strong Zn²⁺ ion affinity to promote homogeneous Zn deposition but also has good insulating behavior to suppress parasitic reactions. Benefiting from these multifunctional advantages, the cycle life of the Zn||Zn symmetric cells reaches over 1600 h in SF-containing ZnSO₄ electrolytes. In addition, by adopting a potassium vanadate cathode, the full cell shows excellent cycling stability for 1000 cycles at 3 A g^-1. The in situ construction of a protective film on the Zn anode from natural protein molecules provides an effective strategy to achieve high-performance Zn metal anodes for Zn-ion batteries.

Ion Motor as a New Universal Strategy for the Boosting the Performance of Zn-Ion Batteries

The quiescent electrolyte causes serious concentration polarization and dendrite problems during the charging and discharging of the battery, which restricts the development of metal secondary batteries and flow batteries. Herein, we report a new concept of ion motors, with which the directional driving and uniformity of the electrolyte are realized to eliminate the concentration polarization and dendritic phenomenon for secondary metal batteries and flow batteries without additional external energy. In this study, a dendrite-free secondary metal battery with ion motors is constructed to eliminate a considerable concentration polarization voltage by a tiny induced counter electromotive force generated by Lorentz force, significantly improving the output power and energy efficiency of the battery. An actual pump-free flow battery with an ion motor is also assembled, which overcomes the problems of low energy efficiency and the complex structure caused by the traditional flow battery requiring 1-2 pumps to drive the electrolyte. The efficiency of ion motors to drive the electrolyte is hundreds of times higher than that of the mechanical pump. Therefore, the ion motor provides a universal strategy for designing more pump-free flow batteries and metal secondary batteries without the risk of dendrites in the future.

Dynamic Biomolecular "Mask" Stabilizes Zn Anode

Zn anode is confronted with serious Zn dendrite growth and water-induced parasitic reactions, which severely hinders the rapid development and practical application of aqueous zinc metal batteries (AZMBs). Herein, inspired by sodium hyaluronate (SH) biomolecules in living organisms featured with the functions of water retention, ion-transport regulation, and film-formation, the SH working as a dynamic and self-adaptive "mask" is proposed to stabilize Zn anode. Benefiting from the abundant functional groups with high hydrophilicity and zincophilicity, SH molecule can constrain active water molecules on the Zn-electrolyte interface and participate in Zn²⁺ solvation structure to suppress parasitic reactions. Furthermore, the dynamical adsorption of SH with high-density negative charge on the Zn surface could serve as Zn²⁺ reservoirs to guide uniform Zn deposition. Consequently, stable Zn plating and an ultrahigh cumulative plating capacity (CPC) of 4.8 Ah cm^-2 are achieved even at 20 mA cm^-2 (20 mAh cm^-2 ) in a Zn||Zn symmetric battery, reaching a record level in AZMBs. In addition, the Zn||β-MnO₂ full battery exhibits a substantially improved cycle stability. This work presents a route to realize a highly reversible and stable Zn metal anode by learning from nature.

High-Rate, Large Capacity, and Long Life Dendrite-Free Zn Metal Anode Enabled by Trifunctional Electrolyte Additive with a Wide Temperature Range

Aqueous Zn-ion batteries (AZIBs) have been recognized as promising energy storage devices due to their high theoretical energy density and cost-effectiveness. However, side reactions and Zn dendrite generation during cycling limit their practical application. Herein, ammonium acetate (CH₃ COONH₄ ) is selected as a trifunctional electrolyte additive to enhance the electrochemical performance of AZIBs. Research findings show that NH₄ ⁺ (oxygen ligand) and CH₃ COO^- (hydrogenligand) with preferential adsorption on the Zn electrode surface can not only hinder Zn anode directly contact with active H₂ O, but also regulate the pH value of the electrolyte, thus suppressing the parasitic reactions. Additionally, the formed SEI is mainly consisted of Zn₅ (CO₃ )₂ (OH)₆ with a high Zn²⁺ transference number, which could achieve a dendrite-free Zn anode by homogenizing Zn deposition. Consequently, the Zn||Zn symmetric batteries with CH₃ COONH₄ -based electrolyte can operate steadily at an ultrahigh current density of 40 mA cm^-2 with a cumulative capacity of 6880 mAh cm^-2 , especially stable cycling at -10 °C. The assembled Zn||MnO₂ full cell and Zn||activated carbon capacitor also deliver prominent electrochemical reversibility. This work provides unique understanding of designing multi-functional electrolyte additive and promotes a long lifespan at ultrahigh current density for AZIBs.

Surface-Alloyed Nanoporous Zinc as Reversible and Stable Anodes for High-Performance Aqueous Zinc-Ion Battery

Metallic zinc (Zn) is one of the most attractive multivalent-metal anode materials in post-lithium batteries because of its high abundance, low cost and high theoretical capacity. However, it usually suffers from large voltage polarization, low Coulombic efficiency and high propensity for dendritic failure during Zn stripping/plating, hindering the practical application in aqueous rechargeable zinc-metal batteries (AR-ZMBs). Here we demonstrate that anionic surfactant-assisted in situ surface alloying of Cu and Zn remarkably improves Zn reversibility of 3D nanoporous Zn electrodes for potential use as high-performance AR-ZMB anode materials. As a result of the zincophilic Zn_xCu_y alloy shell guiding uniform Zn deposition with a zero nucleation overpotential and facilitating Zn stripping via the Zn_xCu_y/Zn galvanic couples, the self-supported nanoporous Zn_xCu_y/Zn electrodes exhibit superior dendrite-free Zn stripping/plating behaviors in ambient aqueous electrolyte, with ultralow polarizations under current densities up to 50 mA cm^‒2, exceptional stability for 1900 h and high Zn utilization. This enables AR-ZMB full cells constructed with nanoporous Zn_xCu_y/Zn anode and K_zMnO₂ cathode to achieve specific energy of as high as ~ 430 Wh kg^‒1 with ~ 99.8% Coulombic efficiency, and retain ~ 86% after long-term cycles for > 700 h.

Regulating Dendrite-Free Zinc Deposition by Red Phosphorous-Derived Artificial Protective Layer for Zinc Metal Batteries

Rational architecture design of the artificial protective layer on the zinc (Zn) anode surface is a promising strategy to achieve uniform Zn deposition and inhibit the uncontrolled growth of Zn dendrites. Herein, a red phosphorous-derived artificial protective layer combined with a conductive N-doped carbon framework is designed to achieve dendrite-free Zn deposition. The Zn-phosphorus (ZnP) solid solution alloy artificial protective layer is formed during Zn plating. Meanwhile, the dynamic evolution mechanism of the ZnP on the Zn anode is successfully revealed. The concentration gradient of the electrolyte on the electrode surface can be redistributed by this protective layer, thereby achieving a uniform Zn-ion flux. The fabricated Zn symmetrical battery delivers a dendrite-free plating/stripping for 1100 h at the current density of 2.0 mA cm-2 . Furthermore, aqueous Zn//MnO2 full cell exhibits a reversible capacity of 200 mAh g-1 after 350 cycles at 1.0 A g-1 . This study suggests an effective solution for the suppression of Zn dendrites in Zn metal batteries, which is expected to provide a deep insight into the design of high-performance rechargeable aqueous Zn-ion batteries.

Metal-Organic Framework-Based Materials for Aqueous Zinc-Ion Batteries: Energy Storage Mechanism and Function

Aqueous rechargeable zinc-ion batteries (ZIBs) featuring competitive performance, low cost and high safety hold great promise for applications in grid-scale energy storage and portable electronic devices. Metal-organic frameworks (MOFs), relying on their large framework structure and abundant active sites, have been identified as promising materials in ZIBs. This review comprehensively presents the current development of MOF-based materials including MOFs and their derivatives in ZIBs, which begins with Zn storage mechanism of MOFs, followed by introduction of various types of MOF-based cathode materials (PB and PBA, Mn-based MOF, V-based MOF, conductive MOF and their derivatives), and the regulation approaches for Zn deposition behavior. The key factors and optimization strategies of MOF-based materials that affect ZIBs performance are emphasized and discussed. Finally, the challenges and further research directions of MOF-based materials for advanced zinc-ion batteries are provided.

Hierarchical Confinement Effect with Zincophilic and Spatial Traps Stabilized Zn-Based Aqueous Battery

Zn-based aqueous batteries (ZABs) have been regarded as promising candidates for safe and large-scale energy storage in the "post-Li" era. However, kinetics and stability problems of Zn capture cannot be concomitantly regulated, especially at high rates and loadings. Herein, a hierarchical confinement strategy is proposed to design zincophilic and spatial traps through a host of porous Co-embedded carbon cages (denoted as CoCC). The zincophilic Co sites act as preferred nucleation sites with low nucleation barriers (within 0.5 mA h cm^-2), and the carbon cage can further spatially confine Zn deposition (within 5.0 mA h cm^-2). Theoretical simulations and in situ/ex situ structural observations reveal the hierarchical spatial confinement by the elaborated all-in-one network (within 12 mA h cm^-2). Consequently, the elaborate strategy enables a dendrite-free behavior with excellent kinetics (low overpotential of ca. 65 mV at a high rate of 20 mA cm^-2) and stable cycle life (over 800 cycles), pushing forward the next-generation high-performance ZABs.

Uniform Zn2+ Flux Distribution Achieved by an Artificial Three-Dimensional Framework: The Enhanced Ion-Transfer Kinetics for Long-Life and Dendrite-Free Zn Anodes

Zinc metal has been naturally considered as the most anticipated anode material for zinc-ion batteries (ZIBs), given the benefits of large volume specific capacity, low electrode potential, and inexpensive cost. However, the growth of zinc dendrites and the corrosion of hydrogen evolution during the Zn2+ ion deposition process are the bottlenecks restricting the large-scale application of zinc metal. Herein, we report the modification of zinc anodes by utilizing a ball-milling clay precipitate (designated as BMC, consisting of the unetched MAX phase and the Ti3C2Tx phase) to construct a three-dimensional (3D) framework on the surface of zinc foil (Zn@BMC). Different from the close stacking of conventionally prepared MXene sheets after film formation, the BMC coating firmly adheres to the zinc surface through the binder. The abundant internal space relieves the stress during the volume change of the Zn metal and uniformizes the Zn2+ ion flux. Consequently, Zn@BMC not only achieves a stable long cycle (2000 h, 0.5 mA h cm-2) but also inhibits the side reaction of hydrogen evolution by physically separating the electrolyte and the zinc metal anode. We reckon that our research will aid in clarifying the design principles governing the interface of the zinc metal anode in ZIBs.

Nitrogen-Doped Carbon Fibers Embedded with Zincophilic Cu Nanoboxes for Stable Zn-Metal Anodes

The practical application of Zn-metal anodes (ZMAs) is mainly impeded by the limited lifespan and low Coulombic efficiency (CE) resulting from the Zn dendrite growth and side reactions. Herein, a 3D multifunctional host consisting of N-doped carbon fibers embedded with Cu nanoboxes (denoted as Cu NBs@NCFs) is rationally designed and developed for stable ZMAs. The 3D macroporous configuration and hollow structure can lower the local current density and alleviate the large volume change during the repeated cycling processes. Furthermore, zincophilic Cu and in-situ-formed Cu-Zn alloy can act as homogeneous nucleation sites to minimize the Zn nucleation overpotential, further guiding uniform and dense Zn deposition. As a result, this Cu NBs@NCFs host exhibits high CE of Zn plating/stripping for 1000 cycles. The Cu NBs@NCFs-Zn electrode shows low voltage hysteresis and prolonged cycling life (450 h) with dendrite-free behaviors. As a proof-of-concept demonstration, a Zn-ion full cell is fabricated based on this Cu NBs@NCFs-Zn anode, which demonstrates decent rate capability and improved cycling performance.

Surface and Interface Engineering of Zn Anodes in Aqueous Rechargeable Zn-Ion Batteries

Rechargeable zinc-ion batteries (ZIBs) have shown great potential as an alternative to lithium-ion batteries. The ZIBs utilize Zn metal as the anode, which possesses many advantages such as low cost, high safety, eco-friendliness, and high capacity. However, on the other hand, the Zn anode also suffers from many issues, including dendritic growth, corrosion, and passivation. These issues are largely related to the surface and interface properties of the Zn anode. Many efforts have therefore been devoted to the modification of the Zn anode, aiming to eliminate the above-mentioned problems. This review gives a comprehensive summary on the mechanism behind these issues as well as the recent progress on Zn anode modification with focus on the strategies of surface and interface engineering, covering the design and application of both the Zn anode supports and surface protective layers, along with abundant examples. In addition, the promising research directions and perspective on these strategies are also presented.

Highly Reversible Zn Metal Anodes Enabled by Freestanding, Lightweight, and Zincophilic MXene/Nanoporous Oxide Heterostructure Engineered Separator for Flexible Zn-MnO2 Batteries

Aqueous zinc (Zn)-ion batteries are regarded as promising candidates for large-scale energy storage systems because of their high safety, low cost, and environmental benignity. However, the dendrite issue of Zn anode hinders their practical application. Herein, a freestanding, lightweight, and zincophilic MXene/nanoporous oxide heterostructure engineered separator is designed to stabilize a Zn metal anode. The nanoporous oxides prepared by a one-step vacuum distillation technique afford the advantages of large surface area, high porosity, and homogeneous porous structure. The zincophilic MXene@oxides layer can homogenize the electric field distribution, facilitate ion diffusion kinetics, reduce local current density, and promote even Zn ionic flux, which will regulate uniform Zn deposition and suppress side reactions. Accordingly, dendrite-free Zn anodes with stable cyclability are achieved for over 500 h at an ultrahigh area capacity of 10 mAh cm^-2. Besides, flexible, long-lifespan, and high-rate N/S-doped three-dimensional MXene@MnO₂||Zn full cells are constructed with the engineered separator. Moreover, this strategy can be successfully extended to lithium, sodium, potassium, and magnesium metal batteries, indicating that separator regulation is a universal approach to overcome the challenges of metal batteries.

Confining Sn nanoparticles in interconnected N-doped hollow carbon spheres as hierarchical zincophilic fibers for dendrite-free Zn metal anodes

We developed a three-dimensional hybrid fiber host consisting of interconnected N-doped hollow carbon spheres embedded with Sn nanoparticles (denoted as Sn@NHCF) for Zn metal anodes in high-performance Zn metal batteries. Experimental observations and density functional theory calculation reveal that the zincophilic Sn nanoparticles and N-doped carbons enable the homogeneous Zn deposition on the interior and exterior surfaces of the hollow fibers. Moreover, the hierarchical hollow fiber network effectively reduces the structural stress during the plating/stripping process. As a result, the developed Sn@NHCF host exhibits remarkable electrochemical properties in terms of high Coulombic efficiency, low voltage hysteresis, and prolonged cycling stability without dendrite formation. Moreover, a full cell based on the designed Sn@NHCF-Zn composite anode and a V₂O₅ cathode demonstrates superior rate capability and stable cycle life. This work provides a new strategy for the design of dendrite-free Zn anodes for practical applications.

Stable Zn Metal Anodes with Limited Zn-Doping in MgF2 Interphase for Fast and Uniformly Ionic Flux

The practical applications of aqueous Zn metal batteries are currently restricted by the inherent drawbacks of Zn such as the hydrogen evolution reaction, sluggish kinetics, and dendrite formation. To address these problems, herein, a limitedly Zn-doped MgF₂ interphase comprising an upper region of pure, porous MgF₂ and a lower region of gradient Zn-doped MgF₂ is achieved via radio frequency sputtering technique. The porous MgF₂ region is a polar insulator whose high corrosion resistance facilitates the de-solvation of the solvated Zn ions and suppression of hydrogen evolution, resulting in Zn metal electrodes with a low interfacial resistance. The Zn-doped MgF₂ region facilitates fast transfer kinetics and homogeneous deposition of Zn ions owing to the interfacial polarization between the Zn dopant and MgF₂ matrix, and the high concentration of the Zn dopant on the surface of the metal substrate as fine nuclei. Consequently, a symmetric cell incorporating the proposed Zn metal exhibits low overpotentials of ~ 27.2 and ~ 99.7 mV without Zn dendrites over 250 to 8000 cycles at current densities of 1.0 and 10.0 mA cm^-2, respectively. The developed Zn/MnO₂ full cell exhibits superior capacity retentions of 97.5% and 84.0% with average Coulombic efficiencies of 99.96% after 1000 and 3000 cycles, respectively.

Controlled Deposition of Zinc-Metal Anodes via Selectively Polarized Ferroelectric Polymers

Aqueous zinc-ion batteries are regarded as ideal candidates for stationary energy-storage systems due to their low cost and high safety. However, zinc can readily grow into dendrites, leading to limited cycling performance and quick failure of the batteries. Herein, a novel strategy is proposed to mitigate this dendrite problem, in which a selectively polarized ferroelectric polymer material (poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE))) is employed as a surface protective layer on zinc anodes. Such a polarized ferroelectric polymer layer can enable a locally concentrated zinc-ion distribution along the coated surface and thus enable the horizontal growth of zinc plates. As a result, symmetrical zinc batteries using such anodes exhibit long cycling lifespan at 0.2 mA cm^-2 , 0.2 mAh cm^-2 for 2000 h, and a high rate performance up to 15 mA cm^-2 . Also, the full cell (including a Zn-MnO₂ battery and a zinc-ion capacitor) based on this anode is demonstrated. This work provides a novel strategy to protect the zinc anode and even other metal anodes exploiting polymer ferroelectricity.

Formation of Super-Assembled TiOx /Zn/N-Doped Carbon Inverse Opal Towards Dendrite-Free Zn Anodes

Uncontrolled growth of Zn dendrites and side reactions are the major restrictions for the commercialization of Zn metal anodes. Herein, we develop a TiO_x /Zn/N-doped carbon inverse opal (denoted as TZNC IO) host to regulate the Zn deposition. Amorphous TiO_x and Zn/N-doped carbon can serve as the zincophilic nucleation sites to prevent the parasitic reactions. More importantly, the highly ordered IO host homogenizes the local current density and electric field to stabilize Zn deposition. Furthermore, the three-dimensional open networks could regulate Zn ion flux to enable stable cycling performance at large current densities. Owing to the abundant zincophilic sites and the open structure, granular Zn deposits could be realized. As expected, the TZNC IO host guarantees the steady Zn plating/stripping with a long-term stability over 450 h at the current density of 1 mA cm^-2 . As a proof-of-concept demonstration, a TZNC@Zn||V₂ O₅ full cell shows long lifespan over 2000 cycles at 5.0 A g^-1 .

A Highly Reversible Zinc Anode for Rechargeable Aqueous Batteries

Zinc metal holds a great potential as an anode material for next-generation aqueous batteries due to its suitable redox potential, high specific capacity, and low cost. However, the uncontrollable dendrite growth and detrimental side reactions with electrolytes hinder the practical application of this type of electrodes. To tackle the issues, an ultrathin (∼1 μm) sulfonated poly(ether ether ketone) (SPEEK) solid-electrolyte interphase (SEI) is constructed onto the Zn anode surface by a facile spin-coating method. We demonstrate that the polymeric SEI simultaneously blocks the water molecules and anions, uniformizes the ion flux, and facilitates the desolvation process of Zn2+ ions, thus effectively suppressing the side reactions and Zn dendrite formation. As a result, the newly developed Zn@SPEEK anode enables a symmetric cell to stably operate over 1000 cycles at 5 mA cm-2 without degradation. Moreover, with the Zn anode paired with a MnO2 cathode, the full cell exhibits an improved Coulombic efficiency (over 99% at 0.1 A g-1), a superior rate capability (127 mA h g-1 at 2 A g-1), and excellent cycling stability (capacity retention of 70% over 1000 cycles at 1 A g-1). This work provides a facile yet effective strategy to address the critical challenges in Zn anodes, paving the way for the development of high-performance rechargeable aqueous batteries.

3D Printing and Chemical Dealloying of a Hierarchically Micro- and Nanoporous Catalyst for Wastewater Purification

Hierarchically porous-structured materials show tremendous potential for catalytic applications. In this work, a facile method through the combination of three-dimensional (3D) printing and chemical dealloying was employed to synthesize a nanoporous-copper-encapsulating microporous-diamond-cellular-structure (NPC@DCS) catalyst. The developed NPC@DCS catalyst was utilized as a heterogeneous photo-Fenton-like catalyst where its catalytic applications in the remediation of organic wastewater were exemplified. The experimental results demonstrated that the NPC@DCS catalyst possessed a remarkable degradation efficiency in the removal of rhodamine B with a reaction rate of 8.24 × 10^-2 min^-1 and displayed attractive stability, durability, mineralization capability, and versatility. This work not only manifests the applicability of the proposed NPC@DCS catalyst for wastewater purification in practical applications but also is anticipated to inspire the incorporation of the 3D printing technology and chemical synthesis to design high-performance metal catalysts with tunable hierarchical micro- and nanopores for functional applications.

Rational Design of Sulfur-Doped Three-Dimensional Ti3C2Tx MXene/ZnS Heterostructure as Multifunctional Protective Layer for Dendrite-Free Zinc-Ion Batteries

Owing to its high theoretical capacity, appropriate working potential, abundant resource, intrinsic safety, and low cost, zinc (Zn) metal is regarded as one of the most promising anode candidates for aqueous batteries. However, the hazards caused by dendrite growth and side reactions impede its practical applications. Herein, to solve these problems, a protective heterogeneous layer composed of electronic conductive sulfur-doped three-dimensional (3D) MXene and ionic conductive ZnS on Zn anode is designed and constructed. The sulfur doping and the creation of a 3D structure on MXene are simultaneously achieved during the generation of ZnS. The sulfur-doped 3D MXene can effectively homogenize distribution of electric field, decrease local current density, and alleviate volume change. The ZnS can inhibit side reactions, promote uniform Zn²⁺ distribution, and accelerate Zn²⁺ migration. Consequently, a stable and dendrite-free Zn anode is achieved with notable cycling stability up to 1600 h and rate performance. The relationship between structure of protective layer and performance of Zn anode is also probed. With the protected Zn anode and freestanding sulfur-doped 3D MXene@MnO₂ cathode, a high-energy, long cycling life, and high-rate full cell is obtained. This work may provide a direction for the design of practical Zn anodes and other metal-based battery systems.