Designing Undercoordinated Ni-Nx and Fe-Nx on Holey Graphene for Electrochemical CO2 Conversion to Syngas

Designing asymmetrical TMN4 sites via phosphorus or sulfur dual coordination as high-performance electrocatalysts for oxygen evolution reaction

The development ofhighly efficient oxygen evolution reaction (OER) catalysts based on more cost-effective and earth-abundant elements is of great significance and still faces a huge challenge. In this work, a series of transition metal (TM)embedding a newly-defined monolayer carbon nitride phase is theoretically profiled and constructed as a catalytic platform for OER studies. Typically, a four-step screening strategy was proposed to rapidly identified high performance candidates and the coordination structure and catalytic performance relationship was thoroughly analyzed. Moreover, the eliminating criterion was established to condenses valid range based on the Gibbs free energy of OH*. Our results reveal that the as-constructed 2FeCN/P exhibits superior activity toward OER with an ultralow overpotential of 0.25 V, at the same time, the established 3FeCN/S configuration performed well as abifunctional OER/ORR electrocatalysis with extremely low overpotential ηOER/ηORR of 0.26/0.48 V. Overall, this work provides an effective framework for screening advanced OER catalysts, which can also be extended to other complex multistep catalytic reactions.

Biochar Meets Single-Atom: A Catalyst for Efficient Utilization in Environmental Protection Applications and Energy Conversion

Single-atom catalysts (SACs), combining the advantages of multiphase and homogeneous catalysis, have been increasingly investigated in various catalytic applications. Carbon-based SACs have attracted much attention due to their large specific surface area, high porosity, particular electronic structure, and excellent stability. As a cheap and readily available carbon material, biochar has begun to be used as an alternative to carbon nanotubes, graphene, and other such expensive carbon matrices to prepare SACs. However, a review of biochar-based SACs for environmental pollutant removal and energy conversion and storage is lacking. This review focuses on strategies for synthesizing biochar-based SACs, such as pre-treatment of organisms with metal salts, insertion of metal elements into biochar, or pyrolysis of metal-rich biomass, which are more simplistic ways of synthesizing SACs. Meanwhile, this paper attempts to 1) demonstrate their applications in environmental remediation based on advanced oxidation technology and energy conversion and storage based on electrocatalysis; 2) reveal the catalytic oxidation mechanism in different catalytic systems; 3) discuss the stability of biochar-based SACs; and 4) present the future developments and challenges regarding biochar-based SACs.

Optimizing Integrated-Loss Capacities via Asymmetric Electronic Environments for Highly Efficient Electromagnetic Wave Absorption

Asymmetric electronic environments based on microscopic-scale perspective have injected infinite vitality in understanding the intrinsic mechanism of polarization loss for electromagnetic (EM) wave absorption, but still exists a significant challenge. Herein, Zn single-atoms (SAs), structural defects, and Co nanoclusters are simultaneously implanted into bimetallic metal-organic framework derivatives via the two-step dual coordination-pyrolysis process. Theoretical simulations and experimental results reveal that the electronic coupling interactions between Zn SAs and structural defects delocalize the symmetric electronic environments and generate additional dipole polarization without sacrificing conduction loss owing to the compensation of carbon nanotubes. Moreover, Co nanoclusters with large nanocurvatures induce a strong interfacial electric field, activate the superiority of heterointerfaces and promote interfacial polarization. Benefiting from the aforementioned merits, the resultant derivatives deliver an optimal reflection loss of -58.9 dB and the effective absorption bandwidth is 5.2 GHz. These findings provide an innovative insight into clarifying the microscopic loss mechanism from the asymmetric electron environments viewpoint and inspire the generalized electronic modulation engineering in optimizing EM wave absorption.

Tunable Syngas Formation at Industrially Relevant Current Densities via CO2 Electroreduction and Hydrogen Evolution over Ni and Fe-derived Catalysts obtained via One-Step Pyrolysis of Polybenzoxazine Based Composites

Simultaneous electroreduction of CO2 and H2O to syngas can provide a sustainable feed for established processes used to synthesize carbon-based chemicals. The synthesis of MOx/M-N-Cs (M = Ni, Fe) electrocatalysts reported via one-step pyrolysis that shows increased performance during syngas electrosynthesis at high current densities with adaptable H2/CO ratios, e.g., for the Fischer-Tropsch process. When embedded in gas diffusion electrodes (GDEs) with optimized hydrophobicity, the NiOx/Ni-N-C catalyst produces syngas (H2/CO = 0.67) at -200 mA cm-2 while for the FeOx/Fe-N-C syngas production occurs at ≈-150 mA cm-2. By tuning the electrocatalyst's microenvironment, stable operation for >3 h at -200 mA cm-2 is achieved with the NiOx/Ni-N-C GDE. Post-electrolysis characterization revealed that the restructuring of the catalyst via reduction of NiOx to metallic Ni NPs still enables stable operation of the electrode at -200 mA cm-2, when embedded in an optimized microenvironment. The ionomer and additives used in the catalyst layer are important for the observed stable operation. Operando Raman measurements confirm the presence of NiOx during CO formation and indicate weak adsorption of CO on the catalyst surface.

Tailored Local Electronic Environment of Co-N4 Sites in Cobalt Phthalocyanines for Enhanced CO2 Reduction Reaction

Atomically dispersed Co-N4-based catalysts have been recently emerging as one of the most promising candidates for facilitating CO2 reduction reaction (CO2RR). The local electronic environment of Co-N4 sites in these catalysts is considered to play a critical role in adjusting the catalytic performance, the effort of which however is not yet clearly verified. Herein, a series of cobalt phthalocyanines with different peripheral substituents including unsubstituted phthalocyanine Co(II) (CoPc), 2,9,16,23-tetramethoxyphthalocyaninato Co(II) (CoPc-4OCH3), and 2,9,16,23-tetranitrophthalocyaninato Co(II) (CoPc-4NO2) are supported onto the surface of the multi-walled carbon nanotubes (CNTs), affording CoPc@CNTs, CoPc-4OCH3@CNTs, and CoPc-4NO2@CNTs. X-ray photoelectron spectroscopy and X-ray absorption near-edge structure measurements disclose the influence of the peripheral substituents on the local electronic structure of Co atoms in these three catalysts. Electrochemical tests indicate the higher CO2RR performance of CoPc-4OCH3@CNTs compared to CoPc@CNTs and CoPc-4NO2@CNTs as exemplified by the higher Faraday efficiency of CO, larger part current densities, and better stability displayed by CoPc-4OCH3@CNTs at the applied voltage range from -0.6 to -1.0 V versus RHE in both H-cell and flow cell. These results highlight the effect of the electron-donating -OCH3 substituent on the enhanced catalytic activity of CoPc-4OCH3@CNTs, which will help develop Co-N4-based catalysts with promising catalytic performance toward CO2RR.

Elevated temperature-driven coordinative reconstruction of an unsaturated single-Ni-atom structure with low valency on a polymer-derived matrix for the electrolytic oxygen evolution reaction

A high-temperature pyrolysis-controlled coordination reconstruction resulted in a single-Ni-atom structure with a Ni-Nx-C structural unit (x = N atom coordinated to Ni). Pyrolysis of Ni-phen@ZIF-8-RF at 700 °C resulted in NiNP-NC-700 with predominantly Ni nanoparticles. Upon elevating the pyrolysis temperature from 700 to 900 °C, a coordination reconstruction offers Ni-Nx atomic sites in NiSA-NC-900. A combined investigation with X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, and soft X-ray L3-edge spectroscopy suggests the stabilization of low-valent Niδ+ (0 < δ < 2) in the Ni-N-C structural units. The oxygen evolution reaction (OER) is a key process during water splitting in fuel cells. However, OER is a thermodynamically uphill reaction with multi-step proton-coupled electron transfer and sluggish kinetics, due to which there is a need for a catalyst that can lower the OER overpotentials. The adsorption energy of a multi-step reaction on a single metal atom with coordination unsaturation tunes the adsorption of each oxygenated intermediate. The promising OER activity of the NiSA-NC-900/NF anode on nickel foam was followed by the overall water splitting (OWS) using using NiSA-NC-900/NF as anode and Pt coil as the cathodic counterpart, wherein a cell potential of 1.75 V at 10 mA cm-2 was achieved. The cell potential recorded with Pt(-)/(+)NiSA-NC-900/NF was much lower than that obtained for other cells, i.e., Pt(-)/NF and NF(-)/(+)NF, which enhances the potentials of low-valent NiSAs for insightful understanding of the OER. At a constant applied potential of 1.61 V (vs. RHE) for 12 h, an small increase in current for initial 0.6 h followed by a constant current depicts the fair stability of catalyst for 12 h. Our results offer an insightful angle into the OER with a coordinatively reconstructed single-Ni-atom structure at lower valency (<+2).

Facile low-temperature supercritical carbonization method to prepare high-loading nickel single atom catalysts for efficient photodegradation of tetracycline

Environmental photocatalysis is a promising technology for treating antibiotics in wastewater. In this study, a supercritical carbonization method was developed to synthesize a single-atom photocatalyst with a high loading of Ni (above 5 wt.%) anchored on a carbon-nitrogen-silicate substrate for the efficient photodegradation of a ubiquitous environmental contaminant of tetracycline (TC). The photocatalyst was prepared from an easily obtained metal-biopolymer-inorganic supramolecular hydrogel, followed by supercritical drying and carbonization treatment. The low-temperature (300°C) supercritical ethanol treatment prevents the excessive structural degradation of hydrogel and greatly reduces the metal clustering and aggregation, which contributed to the high Ni loading. Atomic characterizations confirmed that Ni was present at isolated sites and stabilized by Ni-N and Ni-O bonds in a Ni-(N/O)6C/SiC configuration. A 5% Ni-C-Si catalyst, which performed the best among the studied catalysts, exhibited a wide visible light response with a narrow bandgap of 1.45 eV that could efficiently and repeatedly catalyze the oxidation of TC with a conversion rate of almost 100% within 40 min. The reactive species trapping experiments and electron spin resonance (ESR) tests demonstrated that the h+, and ·O2- were mainly responsible for TC degradation. The TC degradation mechanism and possible reaction pathways were provided also. Overall, this study proposed a novel strategy to synthesize a high metal loading single-atom photocatalyst that can efficiently remove TC with high concentrations, and this strategy might be extended for synthesis of other carbon-based single-atom catalysts with valuable properties.

Hierarchical Dual Single-Atom Catalysts with Coupled CoN4 and NiN4 Moieties for Industrial-Level CO2 Electroreduction to Syngas

Renewable-driven electrochemical CO2 reduction reaction (CO2RR) to syngas is an encouraging alternative strategy to traditional fossil fuel-based syngas production, and the development of industrial-level electrocatalysts is vital. Herein, based on theoretical optimization of metal species, hierarchical CoxNi1-x-N-C dual single-atom catalyst (DSAC) with individual NiN4 (CO preferential) and CoN4 (H2 preferential) moieties was constructed by a two-step pyrolysis route. The Co0.5Ni0.5-N-C exhibits a stable CO Faradaic efficiency of 50 ± 5% and an industrial-level current density of 101-365 mA cm-2 in an ultrawide potential window of -0.5 to -1.1 V. The CO/H2 ratio of syngas can be conveniently tuned by regulating the Co/Ni ratio. The coupled effect of NiN4 and CoN4 moieties under a local high-pH microenvironment is responsible for the regulation of the CO/H2 selectivity and yield for the CoxNi1-x-N-C catalyst, which is not present in the mixed Co-N-C and Ni-N-C catalyst. This study provides a promising DSAC strategy for achieving industrial-level syngas production via CO2RR.

Dual-Active-Sites Single-Atom Catalysts for Advanced Applications

Dual-Active-Sites Single-Atom catalysts (DASs SACs) are not only the improvement of SACs but also the expansion of dual-atom catalysts. The DASs SACs contains dual active sites, one of which is a single atomic active site, and the other active site can be a single atom or other type of active site, endowing DASs SACs with excellent catalytic performance and a wide range of applications. The DASs SACs are categorized into seven types, including the neighboring mono metallic DASs SACs, bonded DASs SACs, non-bonded DASs SACs, bridged DASs SACs, asymmetric DASs SACs, metal and nonmetal combined DASs SACs and space separated DASs SACs. Based on the above classification, the general methods for the preparation of DASs SACs are comprehensively described, especially their structural characteristics are discussed in detail. Meanwhile, the in-depth assessments of DASs SACs for variety applications including electrocatalysis, thermocatalysis and photocatalysis are provided, as well as their unique catalytic mechanism are addressed. Moreover, the prospects and challenges for DASs SACs and related applications are highlighted. The authors believe the great expectations for DASs SACs, and this review will provide novel conceptual and methodological perspectives and exciting opportunities for further development and application of DASs SACs.

Influence of coordination structure of Fe-585DV/NxC4-x on the electrocatalytic performance of oxygen reduction reactions

Fe-N-C material, known for its high efficiency, cost-effectiveness, and environmental friendliness, is a promising electrocatalyst in the field of the oxygen reduction reaction (ORR). However, the influence of defects and coordination structures on the catalytic performance of Fe-N-C has not been completely elucidated. In our present investigation, based on density functional theory, we take an Fe adsorbed graphene structure containing a 5-8-5 divacancy (585DV) defect as a research model and investigate the influence of the coordination number of N atoms around Fe (Fe-NxC(4-x)) on the ORR electrocatalyst behavior in alkaline conditions. We find that the Fe-N4 structure exhibits superior ORR catalytic performance than other N coordination structures Fe-NxC4-x (x = 0-3). We explore the reasons for the improved catalytic performance through electronic structure analysis and find that as the N coordination number in the Fe-NxC(4-x) structure increases, the magnetic moment of the Fe single atom decreases. This reduction is conducive to the ORR catalytic performance, indicating that a lower magnetic moment is more favorable for the catalytic process of the ORR within the Fe-NxC(4-x) structure. This study is of great significance for a deeper understanding of the structure-performance relationship in catalysis, as well as for the development of efficient ORR catalysts.

High-Rate CO2 Electrolysis to Formic Acid over a Wide Potential Window: An Electrocatalyst Comprised of Indium Nanoparticles on Chitosan-Derived Graphene

Realizing industrial-scale production of HCOOH from the CO2 reduction reaction (CO2 RR) is very important, but the current density as well as the electrochemical potential window are still limited to date. Herein, we achieved this by integration of chemical adsorption and electrocatalytic capabilities for the CO2 RR via anchoring In nanoparticles (NPs) on biomass-derived substrates to create In/X-C (X=N, P, B) bifunctional active centers. The In NPs/chitosan-derived N-doped defective graphene (In/N-dG) catalyst had outstanding performance for the CO2 RR with a nearly 100 % Faradaic efficiency (FE) of HCOOH across a wide potential window. Particularly, at 1.2 A ⋅ cm-2 high current density, the FE of HCOOH was as high as 96.0 %, and the reduction potential was as low as -1.17 V vs RHE. When using a membrane electrode assembly (MEA), a pure HCOOH solution could be obtained at the cathode without further separation and purification. The FE of HCOOH was still up to 93.3 % at 0.52 A ⋅ cm-2 , and the HCOOH production rate could reach 9.051 mmol ⋅ h-1  ⋅ cm-2 . Our results suggested that the defects and multilayer structure in In/N-dG could not only enhance CO2 chemical adsorption capability, but also trigger the formation of an electron-rich catalytic environment around In sites to promote the generation of HCOOH.

Metal functionalization of two-dimensional nanomaterials for electrochemical carbon dioxide reduction

With the mechanical exfoliation of graphene in 2004, researchers around the world have devoted significant efforts to the study of two-dimensional (2D) nanomaterials. Nowadays, 2D nanomaterials are being developed into a large family with varieties of structures and derivatives. Due to their fascinating electronic, chemical, and physical properties, 2D nanomaterials are becoming an important type of catalyst for the electrochemical carbon dioxide reduction reaction (CO₂RR). Here, we review the recent progress in electrochemical CO₂RR using 2D nanomaterial-based catalysts. First, we briefly describe the reaction mechanism of electrochemical CO₂ reduction to single-carbon (C₁) and multi-carbon (C₂₊) products. Then, we discuss the strategies and principles for applying metal materials to functionalize 2D nanomaterials, such as graphene-based materials, metal-organic frameworks (MOFs), and transition metal dichalcogenides (TMDs), as well as applications of resultant materials in the electrocatalytic CO₂RR. Finally, we summarize the present research advances and highlight the current challenges and future opportunities of using metal-functionalized 2D nanomaterials in the electrochemical CO₂RR.

Inter-Metal Interaction with a Threshold Effect in NiCu Dual-Atom Catalysts for CO2 Electroreduction

Dual-atom catalysts (DACs) have become an emerging platform to provide more flexible active sites for electrocatalytic reactions with multi-electron/proton transfer, such as the CO₂  reduction reaction (CRR). However, the introduction of asymmetric dual-atom sites causes complexity in structure, leaving an incomprehensive understanding of the inter-metal interaction and catalytic mechanism. Taking NiCu DACs as an example, herein, a more rational structural model is proposed, and the distance-dependent inter-metal interaction is investigated by combining theoretical simulations and experiments, including density functional theory computation, aberration-corrected transmission electron microscopy, synchrotron-based X-ray absorption fine structure, and Monte Carlo experiments. A distance threshold around 5.3 Å between adjacent NiN₄  and CuN₄  moieties is revealed to trigger effective electronic regulation and boost CRR performance on both selectivity and activity. A universal macro-descriptor rigorously correlating the inter-metal distance and intrinsic material features (e.g., metal loading and thickness) is established to guide the rational design and synthesis of advanced DACs. This study highlights the significance of identifying the inter-metal interaction in DACs, and helps bridge the gap between theoretical study and experimental synthesis of atomically dispersed catalysts with highly correlated active sites.

Asymmetric Coordination Environment Engineering of Atomic Catalysts for CO2 Reduction

Single-atom catalysts (SACs) have emerged as well-known catalysts in renewable energy storage and conversion systems. Several supports have been developed for stabilizing single-atom catalytic sites, e.g., organic-, metal-, and carbonaceous matrices. Noticeably, the metal species and their local atomic coordination environments have a strong influence on the electrocatalytic capabilities of metal atom active centers. In particular, asymmetric atom electrocatalysts exhibit unique properties and an unexpected carbon dioxide reduction reaction (CO₂RR) performance different from those of traditional metal-N₄ sites. This review summarizes the recent development of asymmetric atom sites for the CO₂RR with emphasis on the coordination structure regulation strategies and their effects on CO₂RR performance. Ultimately, several scientific possibilities are proffered with the aim of further expanding and deepening the advancement of asymmetric atom electrocatalysts for the CO₂RR.

Probing the Synergistic Effects of Mg2+ on CO2 Reduction Reaction on CoPc by In Situ Electrochemical Scanning Tunneling Microscopy

We report herein the in situ electrochemical scanning tunneling microscopy (ECSTM) study on the synergistic effect of Mg²⁺ in CO₂ reduction reaction (CO₂RR) catalyzed by cobalt phthalocyanine (CoPc). ECSTM measurement molecularly resolves the self-assembled CoPc monolayer on the Au(111) substrate. In the CO₂ environment, high-contrast species are observed in the adlayer and assigned to the CO₂ adsorption on CoPc. Furthermore, the contrast of the CO₂-bound complex is higher in Mg²⁺-containing electrolytes than in Mg²⁺-free electrolytes, indicating the formation of the CoPc-CO₂-Mg²⁺ complex. The surface coverage of adsorbed CO₂ is positively correlated with the Mg²⁺ concentration as the additive in electrolytes up to a plateau of 30.8 ± 2.7% when c(Mg²⁺) > 30 mM. The potential step experiment indicates the higher CO₂ adsorption dynamics in Mg²⁺-containing electrolytes than without Mg²⁺. The rate constants of CO₂ adsorption and dissociation in different electrolytes are extracted from the data fitting of statistical results from in situ ECSTM experiments.

Isolating Single and Few Atoms for Enhanced Catalysis

Atomically dispersed metal catalysts have triggered great interest in the field of catalysis owing to their unique features. Isolated single or few metal atoms can be anchored on substrates via chemical bonding or space confinement to maximize atom utilization efficiency. The key challenge lies in precisely regulating the geometric and electronic structure of the active metal centers, thus significantly influencing the catalytic properties. Although several reviews have been published on the preparation, characterization, and application of single-atom catalysts (SACs), the comprehensive understanding of SACs, dual-atom catalysts (DACs), and atomic clusters has never been systematically summarized. Here, recent advances in the engineering of local environments of state-of-the-art SACs, DACs, and atomic clusters for enhanced catalytic performance are highlighted. Firstly, various synthesis approaches for SACs, DACs, and atomic clusters are presented. Then, special attention is focused on the elucidation of local environments in terms of electronic state and coordination structure. Furthermore, a comprehensive summary of isolated single and few atoms for the applications of thermocatalysis, electrocatalysis, and photocatalysis is provided. Finally, the potential challenges and future opportunities in this emerging field are presented. This review will pave the way to regulate the microenvironment of the active site for boosting catalytic processes.

Modulating the Electronic Coordination Configuration and d-Band Center in Homo-Diatomic Fe2N6 Catalysts for Enhanced Peroxymonosulfate Activation

The electronic coordination configuration of metal active sites and the reaction mechanism were investigated by constructing homo-diatomic Fe sites for visible-light-assisted heterogeneous peroxymonosulfate (PMS) activation. A novel Fe₂N₆ catalyst was synthesized by selecting uniform pyridinic-N of graphitic carbon nitride (g-C₃N₄) as anchoring sites. The results demonstrated that homo-diatomic Fe sites modulated the d-band center and electron delocalization and thus enhanced the PMS activation kinetics (3.58 times vs single-atom Fe catalyst) with k_obs of 0.111 min^-1 owing to the synergistic effect between adjacent Fe atoms. New Fe-Fe coordination significantly decreased the contribution of the antibonding state in the Fe-O bond due to the coupling of the Fe-3d orbitals, which facilitated the O-O bond cleavage of the Fe₂-HOO-SO₃ complex with a reduced thermodynamic energy barrier of only -0.29 eV. This work provided comprehensive mechanistic insights into developing homo-diatomic catalysts governed by the coordination configuration and radical pathway for efficient heterogeneous PMS catalysis.

Modulation of Ligand Fields in a Single-Atom Site by the Molten Salt Strategy for Enhanced Oxygen Bifunctional Activity for Zinc-Air Batteries

Achieving full utilization of active sites and optimization of the electronic structure of metal centers is the key to improving the intrinsic activity of single-atom catalysts (SACs) but still remains a challenge to date. Herein, a versatile molten salt-assisted pyrolysis strategy was developed to construct ultrathin, porous carbon nanosheets supported Co SACs. Molten salts are capable of inducing the formation of a Co single-atom and porous graphene-like carbon, which facilitates full exposure of the active center and simultaneously endows the Co SACs with abundant defective Co-N₄ configurations. The reported Co SACs deliver an excellent bifunctional activity and good stability for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Moreover, metal-air batteries (MABs) assembled with the Co SACs as air electrode also deliver excellent performance with high power densities of 160 mW·cm^-2, large capacities of 760 mAh·g^-1, and superior long-term charge/discharge stability, outperforming those of commercial Pt/C+RuO₂. DFT theoretical calculation results show that the defects in the second coordination shell (CS) of Co SACs promote desorption of the OH* intermediate for the ORR and facilitate deprotonation of OH* for the OER, which can serve as the favorable active site for oxygen bifunctional catalysts. Our work provides an efficient strategy for the preparation of SACs with fully exposed active centers and optimized electronic structures.

Revealing the Real Role of Etching during Controlled Assembly of Nanocrystals Applied to Electrochemical Reduction of CO2

In recent years, the use of inexpensive and efficient catalysts for the electrocatalytic CO₂ reduction reaction (CO₂RR) to regulate syngas ratios has become a hot research topic. Here, a series of nitrogen-doped iron carbide catalysts loaded onto reduced graphene oxide (N-Fe₃C/rGO-H) were prepared by pyrolysis of iron oleate, etching, and nitrogen-doped carbonization. The main products of the N-Fe₃C/rGO-H electrocatalytic reduction of CO₂ are CO and H₂, when tested in a 0.5 M KHCO₃ electrolyte at room temperature and pressure. In the prepared catalysts, the high selectivity (the Faraday efficiency of CO was 40.8%, at −0.3 V), and the total current density reaches ~29.1 mA/cm² at −1.0 V as demonstrated when the mass ratio of Fe₃O₄ NPs to rGO was equal to 100, the nitrogen doping temperature was 800 °C and the ratio of syngas during the reduction process was controlled by the applied potential (−0.2~−1.0 V) in the range of 1 to 20. This study provides an opportunity to develop nonprecious metals for the electrocatalytic CO₂ reduction reaction preparation of synthesis and gas provides a good reference

Considering single-atom catalysts as photocatalysts from synthesis to application

With the ever-increased greenhouse effect and energy crisis, developing novel photocatalysts to realize high-efficient solar-driven chemicals/fuel production is of great scientific and practical significance. Recently, single-atom photocatalysts (SAPs) are promising catalysts with maximized metal dispersion and tuneable coordination environments. SAPs exhibit boosted photocatalytic performance by enhancing optical response, facilitating charge carrier transfer behaviors or directly manipulating surface reaction processes. In this regard, this article systematically reviews the state-of-the-art progress in the development and application of SAPs, especially the mechanism and performance of SAPs on various reaction processes. Some future challenges and potential research directions over SAPs are outlined at the final stage.

Potential- and Time-Dependent Dynamic Nature of an Oxide-Derived PdIn Nanocatalyst during Electrochemical CO2 Reduction

Electrochemical reduction of CO₂ into valuable fuels and chemicals is a promising route of replacing fossil fuels by reducing CO₂ emissions and minimizing its adverse effects on the climate. Tremendous efforts have been carried out for designing efficient catalyst materials to selectively produce the desired product in high yield from CO₂ by the electrochemical process. In this work, a strategy is reported to enhance the electrochemical CO₂ reduction reaction (ECO₂RR) by constructing an interface between a metal-based alloy (PdIn) nanoparticle and an oxide (In₂O₃), which was synthesized by a facile solution method. The oxide-derived PdIn surface has shown excellent eCO₂RR activity and enhanced CO selectivity with a Faradaic efficiency (FE) of 92.13% at -0.9 V (vs RHE). On the other hand, surface PdO formation due to charge transfer on the bare PdIn alloy reduces the CO₂RR activity. With the support of in situ (EXAFS and IR) and ex situ (XPS, Raman) spectroscopic techniques, the optimum presence of the Pd-In-O interface has been identified as a crucial parameter for enhancing eCO₂RR toward CO in a reducing atmosphere. The influence of eCO₂RR duration is reported to affect the overall performance by switching the product selectivity from H₂ (from water reduction) to CO (from eCO₂RR) on the oxide-derived alloy surface. This work also succeeded in the multifold enhancement of the current density by employing the gas diffusion electrode (GDE) and optimizing its process parameters in a flow cell configuration.

Al3+ Dopants Induced Mg2+ Vacancies Stabilizing Single-Atom Cu Catalyst for Efficient Free-Radical Hydrophosphinylation of Alkenes

Utilizing heterogeneous catalysts to overcome obstacles for homogeneous reactions is fascinating but very challenging owing to the difficult fabrication of such catalysts based on the character of target reactions. Herein, we report a Al³⁺ doping strategy to construct single-atom Cu on MgO nanosheets (Cu₁/MgO(Al)) for boosting the free-radical hydrophosphinylation of alkenes. Al³⁺ dopants in MgO bring about abundant Mg²⁺ vacancies for stabilizing dense independent Cu atoms (6.3 wt %), while aggregated Cu nanoparticles are formed without Al³⁺ dopants (Cu/MgO). Cu₁/MgO(Al) exhibits preeminent activity and durability in the hydrophosphinylation of various alkenes with great anti-Markovnikov selectivity (99%). The turnover frequency (TOF) value reaches up to 1272 h^-1, exceeding those of Cu/MgO by ∼6-fold and of traditional homogeneous catalysts drastically. Further experimental and theoretical studies disclose that the prominent performance of Cu₁/MgO(Al) derives from the accelerated initiating step of phosphinoyl radical triggered by individual Cu atoms.

High-curvature Carbon Supported Ni Single Atom with Charge Polarization for High-efficient CO2 Reduction

High curvature carbon supported isolated NiN4 sites with ideal CO2 reduction reaction performance were obtained through a top-down strategy. The charge polarization induced by the axial asymmetry of carbon substrate...

Tailoring the Pore Size, Basicity, and Binding Energy of Mesoporous C3 N5 for CO2 Capture and Conversion

We investigated the CO₂ adsorption and electrochemical conversion behavior of triazole-based C₃ N₅ nanorods as a single matrix for consecutive CO₂ capture and conversion. The pore size, basicity, and binding energy were tailored to identify critical factors for consecutive CO₂ capture and conversion over carbon nitrides. Temperature-programmed desorption (TPD) analysis of CO₂ demonstrates that triazole-based C₃ N₅ shows higher basicity and stronger CO₂ binding energy than g-C₃ N₄ . Triazole-based C₃ N₅ nanorods with 6.1 nm mesopore channels exhibit better CO₂ adsorption than nanorods with 3.5 and 5.4 nm mesopore channels. C₃ N₅ nanorods with wider mesopore channels are effective in increasing the current density as an electrocatalyst during the CO₂ reduction reaction. Triazole-based C₃ N₅ nanorods with tailored pore sizes exhibit CO₂ adsorption abilities of 5.6-9.1 mmol/g at 0 °C and 30 bar. Their Faraday efficiencies for reducing CO₂ to CO are 14-38% at a potential of -0.8 V vs. RHE.