Versatile Interfacial Self-Assembly of Ti3C2Tx MXene Based Composites with Enhanced Kinetics for Superior Lithium and Sodium Storage

Triggering Ion Diffusion and Electron Transport Dual Pathways for High Efficiency Electrochemical Li+ Extraction

Efficient electrochemical Li+ adsorption holds significant promise for lithium extraction, while the mismatched rate between Li+ diffusion and electron transport within the electrode material impedes the electrochemical activity and restricts the adsorption efficiency. To address this challenge, herein, we rationally design and integrate the ion and electron dual-conducting poly(vinyl alcohol)-polyaniline (PVA-PANI) copolymer (CP) within the H1.6Mn1.6O4 (HMO) electrode matrix to facilitate Li+ diffusion and electron transport. The Li+ diffusion coefficient (DLi+) increased from 3.03 × 10-10 to 5.92 × 10-10 cm2/s, while the charge transfer resistance (Rct) decreased from 53.73 to 29.57 ohm. Consequently, the HMO@CP electrode exhibits superior adsorption kinetics and a state-of-the-art high adsorption capacity of up to 49.48 mg/g. Comprehensive mechanistic studies reveal that the negatively charged hydroxyl groups (-OH) in PVA accelerate Li+ diffusion and that the conjugated structure and redox-active quinoid sites in PANI offer denser electron distribution and promote electron transport. This synergistic effect in CP significantly enhanced Li+ diffusion and electron transport, leading to electrochemical activity and adsorption efficiency. Our work highlights the critical role of simultaneously regulating the ion diffusion and electron transport dual pathways for optimizing Li+ adsorption performance and inspires development of the next generation electrochemical adsorption electrodes.

High Performance H2S Sensor Based on Ordered Fe2O3/Ti3C2 Nanostructure at Room Temperature

The utilization of a heterogeneous nanojunction design has shown significant enhancements in the gas sensing capabilities of traditional metal oxide gas sensors. In this study, a novel room temperature H2S gas sensor employing Fe2O3 functionalized Ti3C2 MXene as the sensing material has been developed. This sensor exhibits a broad detection range (0.01-500 ppm), low detection limit (10 ppb), and rapid response/recovery times (10 s/15 s), making it ideal for ppb-level H2S detection. The exceptional gas sensitivity of Fe2O3/Ti3C2 composite to H2S can be attributed to several key factors. First, the unique layered frame structure of Fe2O3/Ti3C2 significantly amplifies the surface area of the hybrid material, enhancing the absorption and diffusion capabilities of H2S molecules. Second, the abundance of functional groups (-O, -OH, and -F) on the surface of Ti3C2 MXene nanosheets provides additional active sites for H2S adsorption, The density functional theory calculation confirms that the adsorption energy of the Fe2O3/Ti3C2 composite for H2S (-2.93 eV) is significantly lower than that of pure Fe2O3 (-2.37 eV) and Ti3C2 (-0.2 eV). Lastly, the remarkable metal conductivity of Ti3C2 MXene ensures efficient electron transfer, thereby enhancing overall sensing performance.

A Small-Molecule Organic Cathode with Extended Conjugation toward Enhancing Na+ Migration Kinetics for Advanced Sodium-Ion Batteries

Organic cathode materials show excellent prospects for sodium-ion batteries (SIBs) owing to their high theoretical capacity. However, the high solubility and low electrical conductivity of organic compounds result in inferior cycle stability and rate performance. Herein, an extended conjugated organic small molecule is reported that combines electroactive quinone with piperazine by the structural designability of organic materials, 2,3,7,8-tetraamino-5,10-dihydrophenazine-1,4,6,9-tetraone (TDT). Through intermolecular condensation reaction, many redox-active groups C═O and extended conjugated structures are introduced without sacrificing the specific capacity, which ensures the high capacity of the electrode and enhances rate performance. The abundant NH2 groups can form intermolecular hydrogen bonds with the C═O groups to enhance the intermolecular interactions, resulting in lower solubility and higher stability. The TDT cathode delivers a high initial capacity of 293 mAh g-1 at 500 mA g-1 and maintains 90 mAh g-1 at an extremely high current density of 70 A g-1. The TDT || Na-intercalated hard carbon (Na-HC) full cells provide an average capacity of 210 mAh g-1 during 100 cycles at 500 mA g-1 and deliver a capacity of 120 mAh g-1 at 8 A g-1.

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Alloy-type antimony (Sb) and conversion-type molybdenum (Mo) anodes have attracted extensive attention in the application of lithium-ion batteries (LIBs) owing to their high theoretical capacity. In this study, Sb2MoO6 nanowires are prepared via a hydrothermal method and assessed their thermal behavior upon heat treatment, observing an intriguing transformation from nanowire to Sb2O3/MoOx nanosheets. To enhance structure stability, the Sb2MoO6 nanowires are successfully coated with a polyphosphazene layer (referred to as PZS@Sb2MoO6), which not only preserved the nanowires form but also yielded N/S co-doped carbon-coated SbPO4/MoOx (NS-C@SbPO4/MoOx) nanowires following annealing in an inert environment. This composite benefits from the stable PO4 3- anion that serve as a buffer against volume expansion and form a Li3PO4 matrix during cycling, both of which substantially bolster ion transport and cycle endurance. Doping with heteroatoms introduces numerous oxygen vacancies, augmenting the number of electrochemically active sites, and carbon integration considerably enhances the electronic conductivity of the electrode and alleviates the volume-change-induced electrode pulverization. Employed as anode materials in LIBs, the NS-C@SbPO4/MoOx electrode exhibits remarkable cycling performance (449.8 mA h g-1 at 1000 mA g-1 over 700 cycles) along with superior rate capability (394.2 mA h g-1 at 2000 mA g-1).

Regulating nitrogen/sulfur terminals on 3D porous Ti3C2 MXene with enhanced reaction kinetics toward high-performance alkali metal ion storage

In this paper, we have developed a simple and efficient sulfur-amine chemistry strategy to prepare a three-dimensional (3D) porous Ti3C2Tx composite with large amounts of N and S terminal groups. The well-designed 3D macroporous architecture presents enlarged interlayer spacing, large specific surface area, and unique porous structure, which successfully solves the re-stacking issue of MXene during storage and electrode fabrication. It is the amount of concentrated hydrochloric acid added to the S-EDA (ethylenediamine)/MXene colloidal suspension that is critical to the formation of 3D morphology. In addition, N and S terminals on MXene could improve the adsorption ability of K+. Owing to the synergistic effect of the structure design and terminal modification, the N, S codoped three-dimensional porous Ti3C2Tx (3D-NSPM) material shows a high surface capacitive contribution and rapid diffusion kinetics for K+ and Na+. As a result, the as-prepared 3D-NSPM delivers high reversible capacity (237 and 273 mAh g-1 at 0.1 A g-1 for PIBs and SIBs, respectively), superb cycling stability (84.9% capacity retention after 10,000 cycles at 1 A g-1 in PIBs and 74.0% capacity retention after 2200 cycles at 1 A g-1 in SIBs), and excellent rate capability (111 and 196 mAh g-1 at 5 A g-1 for PIBs and SIBs, respectively), which are superior to other MXene-based anodes for PIBs and SIBs. Moreover, the described strategy provides a new insight for constructing the 3D porous structure from 2D building blocks beyond MXene.

Advances in MXene surface functionalization modification strategies for CO2 reduction

MXenes, 2D transition metal carbides and nitrides, show great potential in electrocatalytic CO2 reduction reaction (ECO2RR) applications owing to their tunable structure, abundant surface functional groups, large specific surface area and remarkable conductivity. However, the ECO2RR has a complex pathway involving various reaction intermediates. The reaction process yields various products alongside a competitive electrolytic water-splitting reaction. These factors limit the application of MXenes in ECO2RRs. Therefore, this review begins by examining the functionalized modification of MXenes to enhance their catalytic activity and stability via the regulation of interactions between carriers and the catalytic centre. The review firstly covers the synthesis methods and characterisation techniques for functionalized MXenes reported in recent years. Secondly, it presents the methods applied for the functionalized modification of carriers through surface loading of single atoms, clusters, and nanoparticles and construction of composites. These methods regulate the stability, active sites, and metal-carrier electronic interactions. Finally, the article discusses the challenges, opportunities, pressing issues, and future prospects related to MXene-based electrocatalysts.

Progress and Perspective in harnessing MXene-carbon-based composites (0-3D): Synthesis, performance, and applications

MXene is recognized as a promising catalyst for versatile applications due to its abundant metal sites, physicochemical properties, and structural formation. This comprehensive review offers an in-depth analysis of the incorporation of carbon into MXene, resulting in the formation of MXene-carbon-based composites (MCCs). Pristine MXene exhibits numerous outstanding characteristics, such as its atomically thin 2D structure, hydrophilic surface nature, metallic electrical conductivity, and substantial specific surface area. The introduction of carbon guides the assembly of MCCs through electrostatic self-assembly, pairing positively charged carbon with negatively charged MXene. These interactions result in increased interlayer spacing, reduced ion/electron transport distances, and enhanced surface hydrophilicity. Subsequent sections delve into the synthesis methods for MCCs, focusing on MXene integrated with various carbon structures, including 0D, 1D, 2D, and 3D carbon. Comprehensive discussions explore the distinctive properties of MCCs and the unique advantages they offer in each application domain, emphasizing the contributions and advancements they bring to specific fields. Furthermore, this comprehensive review addresses the challenges encountered by MCCs across different applications. Through these analyses, the review promotes a deeper understanding of exceptional characteristics and potential applications of MCCs. Insights derived from this review can serve as guidance for future research and development efforts, promoting the widespread utilization of MCCs across a broad spectrum of disciplines and spurring future innovations.

Unleashing the Potential of MXene-Based Flexible Materials for High-Performance Energy Storage Devices

Since the initial discovery of Ti3 C2 a decade ago, there has been a significant surge of interest in 2D MXenes and MXene-based composites. This can be attributed to the remarkable intrinsic properties exhibited by MXenes, including metallic conductivity, abundant functional groups, unique layered microstructure, and the ability to control interlayer spacing. These properties contribute to the exceptional electrical and mechanical performance of MXenes, rendering them highly suitable for implementation as candidate materials in flexible and wearable energy storage devices. Recently, a substantial number of novel research has been dedicated to exploring MXene-based flexible materials with diverse functionalities and specifically designed structures, aiming to enhance the efficiency of energy storage systems. In this review, a comprehensive overview of the synthesis and fabrication strategies employed in the development of these diverse MXene-based materials is provided. Furthermore, an in-depth analysis of the energy storage applications exhibited by these innovative flexible materials, encompassing supercapacitors, Li-ion batteries, Li-S batteries, and other potential avenues, is conducted. In addition to presenting the current state of the field, the challenges encountered in the implementation of MXene-based flexible materials are also highlighted and insights are provided into future research directions and prospects.

Lithium Azides Induced SnS Quantum Dots for Ultra-Fast and Long-Term Sodium Storage

Tin sulfide (SnS) is an attractive anode for sodium ion batteries (NIBs) because of its high theoretical capacity, while it seriously suffers from the inherently poor conductivity and huge volume variation during the cycling process, leading to inferior lifespan. To intrinsically maximize the sodium storage of SnS, herein, lithium azides (LiN3 )-induced SnS quantum dots (QDs) are first reported using a simple electrospinning strategy, where SnS QDs are uniformly distributed in the carbon fibers. Taking the advantage of LiN3 , which can effectively prevent the growth of crystal nuclei during the thermal treatment, the well-dispersed SnS QDs performs superior Na+ transfer kinetics and pseudocapacitive when used as an anode material for NIBs. The 3D SnS quantum dots embedded uniformly in N-doped nanofibers (SnS QDs@NCF) electrodes display superior long cycling life-span (484.6 mAh g-1 after 5800 cycles at 2 A g-1 and 430.9 mAh g-1 after 7880 cycles at 10 A g-1 ), as well as excellent rate capability (422.3 mAh g-1 at 20 A g-1 ). This fabrication of transition metal sulfides QDs composites provide a feasible strategy to develop NIBs with long life-span and superior rate capability to pave its practical implementation.

High-Performance Alkali Metal Ion Storage in Bi2Se3 Enabled by Suppression of Polyselenide Shuttling Through Intrinsic Sb-Substitution Engineering

Bismuth selenide holds great promise as a kind of conversion-alloying-type anode material for alkali metal ion storage because of its layered structure with large interlayer spacing and high theoretical specific capacity. Nonetheless, its commercial development has been significantly hammered by the poor kinetics, severe pulverization, and polyselenide shuttle during the charge/discharge process. Herein, Sb-substitution and carbon encapsulation strategies are simultaneously employed to synthesize Sb_xBi_2-xSe₃ nanoparticles decorated on Ti₃C₂T_x MXene with encapsulation of N-doped carbon (Sb_xBi_2-xSe₃/MX⊂NC) as anodes for alkali metal ion storage. The superb electrochemical performances could be assigned to the cationic displacement of Sb³⁺ that effectively inhibits the shuttling effect of soluble polyselenides and the confinement engineering that alleviates the volume change during the sodiation/desodiation process. When used as anodes for sodium- and lithium-ion batteries, the Sb_0.4Bi_1.6Se₃/MX⊂NC composite exhibits superior electrochemical performances. This work offers valuable guidance to suppress the shuttling of polyselenides/polysulfides in high-performance alkali metal ion batteries with conversion/alloying-type transition metal sulfide/selenide anode materials.

Schottky Junction Nanozyme Based on Mn-Bridged Co-Phthalocyanines and Ti3C2Tx Nanosheets Boosts Integrative Type I and II Photosensitization for Multimodal Cancer Therapy

Cancer phototheranostics have the potential for significantly improving the therapeutic effectiveness, as it can accurately diagnose and treat cancer. However, the current phototheranostic platforms leave much to be desired and are often limited by tumor hypoxia. Herein, a Schottky junction nanozyme has been established between a manganese-bridged cobalt-phthalocyanines complex and Ti₃C₂T_x MXene nanosheets (CoPc-Mn/Ti₃C₂T_x), which can serve as an integrative type I and II photosensitizer for enhancing cancer therapeutic efficacy via a photoacoustic imaging-guided multimodal chemodynamic/photothermal/photodynamic therapy strategy under near-infrared (808 nm) light irradiation. The Schottky junction not only possessed a narrow-bandgap, enhanced electron-hole separation ability and exhibited a potent redox potential but also enabled improved H₂O₂ and O₂ supplying performances in vitro. Accordingly, the AS1411 aptamer-immobilized CoPc-Mn/Ti₃C₂T_x nanozyme illustrated high accuracy and excellent anticancer efficiency through a multimodal therapy strategy in in vitro and in vivo experiments. This work presents a valuable method for designing and constructing a multifunctional nanocatalytic medicine platform for synergistic cancer therapy of solid tumors.

Three-dimensional Ti3C2Tx and MnS composites as anode materials for high performance alkalis (Li, Na, K) ion batteries

Exploring capable and universal electrode materials could promote the development of alkalis (Li, Na, K) ion batteries. 2D MXene material is an ideal host for the alkalis (Li, Na, K) ion storage, but its electrochemical performance is limited by serious re-stacking and aggregation problems. Herein, we cleverly combined electrostatic self-assembly with gas-phase vulcanization method to successfully combine Ti₃C₂T_x-MXene with ultra-long recyclability and high conductivity with MnS, which presents high specific capacity but poor conductivity. The as-prepared 3D hierarchical Ti₃C₂T_x/MnS composites have an unique sandwich-like constituent units. The tiny MnS nanoparticles are restricted between the Ti₃C₂T_x layers and play a key role in expanding the Ti₃C₂T_x interlayer spacing. As a result, the 3D Ti₃C₂T_x/MnS composites as the anode of LIBs exhibits a superior capacities of 826 and 634 mAh/g after 1000 and 3000 cycles at 0.5 and 1.0 A/g, respectively. More importantly, we reveal the reaction mechanism that the specific capacity first increases and then gradually stabilizes with the increase of charge and discharge cycle times when the as-prepared 3D Ti₃C₂T_x/MnS was used as the anode of LIBs. In addition, we have also used this material in SIBs and PIBs and achieved remarkable electrochemical capability, with a specific capacity of 107 mAh/g after 2500 cycles at 0.5 A/g or 127 mAh/g after the 2000th cycle at 0.2 A/g, respectively.

Functional MXene-Based Materials for Next-Generation Rechargeable Batteries

MXenes are seen as an exceptional candidate to reshape the future of energy with their viable surface chemistry, ultrathin 2D structure, and excellent electronic conductivity. The extensive research efforts bring about rapid expansion of the MXene families with enriched functionalities, which significantly boost performance of the existing energy-storage devices. In this review, the strategies that are developed to functionalize the MXene-based materials, including tailoring their microstructure by ions/molecules/polymers-initiated interaction or self-assembly, surface/interface engineering with dopants or functional groups, constructing heterostructures from MXenes with various materials, and transforming them into a series of derivatives inheriting the merits of the MXene precursors are highlighted. Their applications in emerging battery technologies are demonstrated and discussed. With delicate functionalization and structural engineering, MXene-based electrode materials exhibit improved specific capacity and rate capability, and their presence further suppresses and even eliminates dendrite formation on the metal anodes, which lengthens the lifespan of the rechargeable batteries. Meanwhile, MXenes serve as additives for electrolytes, separators, and current collectors. Finally, some future directions worth of exploration to address the remaining challenging issues of MXene-based materials and achieve the next-generation high-power and low-cost rechargeable batteries are proposed.

A two-dimensional MXene/BN van der Waals heterostructure as an anode material for lithium-ion batteries

Titanium carbide (Ti₃C₂T_x) is highly regarded as a promising anode material for lithium-ion batteries but suffers from sluggish kinetics with low storage capacity. In this work, a BN/Ti₃C₂T_x heterostructure is effectively fabricated by high energy ball-milling, which plays a series of roles in enlarging the interlayer spacing, reducing the size of the nanosheets and maintaining the structural integrity. Benefiting from the synergistic effect between the BN and Ti₃C₂T_x monolayers, it delivers a high reversible capacity of 521.6 mA h g^-1 at 0.1 A g^-1, excellent rate capabilities (344.9 mA h g^-1 at 1 A g^-1 and 251.3 mA h g^-1 at 2.5 A g^-1) and a robust long-term cycling stability with 84.4% capacity retention after 1400 cycles. In particular, the theoretical calculations further confirm that the BN/Ti₃C₂T_x heterostructure manifests improved adsorption energies, an ultralow diffusion barrier and a high charge-discharge rate. These findings provide an important new strategy for further design and rational fabrication of MXenes for energy storage applications.

Universal Strategy for Preparing Highly Stable PBA/Ti3C2Tx MXene toward Lithium-Ion Batteries via Chemical Transformation

Prussian blue analogues (PBAs) are believed to be intriguing anode materials for Li⁺ storage because of their tunable composition, designable topologies, and tailorable porous structures, yet they suffer from severe capacity decay and inferior cycling stability due to the volume variation upon lithiation and high electrical resistance. Herein, we develop a universal strategy for synthesizing small PBA nanoparticles hosted on two-dimensional (2D) MXene or rGO (PBA/MX or PBA/rGO) via an in situ transformation from ultrathin layered double hydroxides (LDH) nanosheets. 2D conductive nanosheets allow for fast electron transport and guarantee the full utilization of PBA even at high rates; at the meantime, PBA nanoparticles effectively prevent 2D materials from restacking and facilitate rapid ion diffusion. The optimized Ni_0.8Mn_0.2-PBA/MX as an anode for lithium-ion batteries (LIBs) delivers a capacity of 442 mAh g^-1 at 0.1 A g^-1 and an excellent cycling robustness in comparison with bare PBA bulk crystals. We believe that this study offers an alternative choice for rationally designing PBA-based electrode materials for energy storage.

Ultrathin-Walled Bi2 S3 Nanoroll/MXene Composite toward High Capacity and Fast Lithium Storage

It is extremely important to develop a high energy density power source with rapid charge-discharge rate to meet people's growing needs. Hence, the development of advanced electrode materials is the top priority. Herein, a simple yet elaborate vacuum-assisted room-temperature phase transfer method is reported to transform MXene nanosheets from water into organic solution. Subsequently, an in-situ growth strategy is employed to deposit ultrathin-walled bismuth sulfide (Bi₂ S₃ ) nanorolls on MXene surface to prepare Bi₂ S₃ /MXene composite as an efficient and high-performance anode material for lithium-ion batteries. Attributed to the unique nanoroll-like structure and the strong synergistic effect, the Bi₂ S₃ /MXene-10 composite can deliver the high discharge capacities of 849 and 541 mAh g^-1 at 0.1 and 5 A g^-1 , respectively. The Bi₂ S₃ /MXene-10 electrode can deliver a high specific capacity of 541 mAh g^-1 even after 600 cycles at a large current density of 1 A g^-1 , proving the superb cycling stability of the Bi₂ S₃ /MXene-10 composite. Additionally, the simple vacuum-assisted room-temperature phase transfer strategy can enlighten researchers to expand the potential application of MXene. Furthermore, the formation mechanism of Bi₂ S₃ nanorolls is also proposed, which may open a new avenue to design and fabricate other nanoroll-like structures.

Interfacial Self-assembly of Organics/MXene Hybrid Cathodes Toward High-Rate-Performance Sodium Ion Batteries

Conjugated quinones are promising cathode materials for sodium-ion batteries. However, the contemporary primary conjugated quinones cathodes still hold to limited capacity, poor rate performance and low cyclability, due to the poor electronic and ionic conductivity. Herein, a series of high-performance conjugated-quinones@MXene hybrid cathodes is constructed by an in situ polymerization-assembly strategy based on the hydrogen bond and S-Ti interaction. The PAQS@Ti₃C₂T_x MXene hybrid, as a typical example, exhibits sandwiched structure with intimate PAQS@MXene contact, resulting in efficient interfacial mass transfer. The assembled MXene is able to build interconnected conductive channels in the hybrid cathodes for continuous and fast electrons/ions transport, which is verified by both the experimental results and density functional theory (DFT) calculations. As a result, the optimal PAQS@MXene hybrid electrode delivers excellent electrochemical performances with high capacity (∼242 mA h g^-1 at 100 mA g^-1), superior fast-charge/discharge ability (∼148 and 121 mA h g^-1 at 5 and 10 A g^-1, respectively), and ultralong cycle life (capacity as high as 57 mA h g^-1 after 9000 cycles at 5 A g^-1), which are more superior to that of the pure PAQS electrodes. Besides, the analogous PPTS@Ti₃C₂T_x MXene hybrid cathode also shows better performances compared to the pure materials.

Mechanistic Insights into the Structural Modulation of Transition Metal Selenides to Boost Potassium Ion Storage Stability

Atomic-level structure engineering is an effective strategy to reduce mechanical degradation and boost ion transport kinetics for battery anodes. To address the electrode failure induced by large ionic radius of K⁺ ions, herein we synthesized Mn-doped ZnSe with modulated electronic structure for potassium ion batteries (PIBs). State-of-the-art analytical techniques and theoretical calculations were conducted to probe crystalline structure changes, ion/electron migration pathways, and micromechanical stresses evolution mechanisms. We demonstrate that the heterogeneous adjustment of the electronic structure can relieve the potassiumization-induced internal strain and improve the structural stability of battery anodes. Our work highlights the importance of the correlation between doping chemistry and mechanical stability, inspiring a pathway of structural engineering strategy toward a highly stable PIBs.