Subsuming the Metal Seed to Transform Binary Metal Chalcogenide Nanocrystals into Multinary Compositions

Colloidal Ag2SbBiSe4 nanocrystals as n‑type thermoelectric materials

Materials with low intrinsic thermal conductivity are essential for the development of high-performance thermoelectric devices. At the same time, the solution processing of these materials may enable the cost-effective production of the devices. Herein, we detail a high-yield and scalable colloidal synthesis route to produce Ag2SbBiSe4 nanocrystals (NCs) using amine-thiol-Se chemistry. The quaternary chalcogenide material is consolidated by a rapid hot-press maintaining the cubic crystalline structure. Transport measurements confirm that n-type Ag2SbBiSe4 exhibits an inherently ultralow lattice thermal conductivity of ca. 0.34 W m-1K-1 at 760 K. Moreover, a modulation doping strategy based on the blending of semiconductor Ag2SbBiSe4 and metallic Sn NCs is demonstrated to control the charge carrier concentration in the final composite material. The introduction of Sn nanodomains additionally blocks phonon propagation thus contributing to reducing the thermal conductivity of the final material. Ultimately, a peak thermoelectric figure of merit value of 0.64 at 760 K is achieved for n-type Ag2SbBiSe4-Sn nanocomposites that also demonstrate a notable Vickers hardness of 185 HV.

Ultrafast Interfacial Charge Transfer in Anisotropic One-Dimensional CsPbBr3/Pt Epitaxial Heterostructure

Colloidal one-dimensional (1D) perovskite nanorods (NRs) and metal epitaxial heterostructures (HSs) are the promising class of new materials for efficient photovoltaic and photocatalytic applications. Besides, fundamental photophysical properties and its device applications of 1D perovskite-metal HSs are limited due to their challenging synthetic protocols and difficulties in forming epitaxial growth between covalent and ionic bonds. Herein, we have synthesized the CsPbBr3 perovskite NRs-platinum (Pt) nanoparticles (NPs) (CsPbBr3/Pt) epitaxial HS using cation exchange followed by chemical reduction methods with the orthorhombic Cs2CuBr4 NRs. Here, the tertiary ammonium ions extensively helped to form the 1D Cs2CuBr4, CsPbBr3 NRs, and CsPbBr3/Pt HSs. For CsPbBr3/Pt HSs an epitaxial relationship has been established in the (020) plane of orthorhombic CsPbBr3 with the (020) plane of cubic Pt. Further, femtosecond transient absorption (TA) spectroscopy was employed to study the charge carrier dynamics of CsPbBr3/Pt HS. Upon 420 nm photoexcitation, excitons in the conduction band of CsPbBr3 NRs dissociate by electron transfer (with an ultrafast time of 1.1 ps) to the Pt domain. In addition, charge transfer (CT) was also demonstrated in the CsPbBr3/Pt HS, which is ascribed to strong electron coupling and epitaxial growth between CsPbBr3 and Pt states. This extensive understanding of the electron transfer dynamics of CsPbBr3/Pt epitaxial HS may pave the way to designing highly efficient photovoltaic and photocatalytic applications.

Revealing Seed-Mediated Structural Evolution of Copper-Silicide Nanostructures: Generating Structured Current Collectors for Rechargeable Batteries

Metal silicide thin films and nanostructures typically employed in electronics have recently gained significant attention in battery technology, where they are used as active or inactive materials. However, unlike thin films, the science behind the evolution of silicide nanostructures, especially 1D nanowires (NWs), is a key missing aspect. Cux Siy nanostructures synthesized by solvent vapor growth technique are studied as a model system to gain insights into metal silicide formation. The temperature-dependent phase evolution of Cux Siy structures proceeds from Cu>Cu0.83 Si0.17 >Cu5 Si>Cu15 Si4 . The role of Cu diffusion kinetics on the morphological progression of Cu silicides is studied, revealing that the growth of 1D metal silicide NWs proceeds through an in situ formed, Cu seed-mediated, self-catalytic process. The different Cux Siy morphologies synthesized are utilized as structured current collectors for K-ion battery anodes. Sb deposited by thermal evaporation upon Cu15 Si4 tripod NWs and cube architectures exhibit reversible alloying capacities of 477.3 and 477.6 mAh g-1 at a C/5 rate. Furthermore, Sb deposited Cu15 Si4 tripod NWs anode tested in Li-ion and Na-ion batteries demonstrate reversible capacities of ≈518 and 495 mAh g-1 .

Epitaxial Heterostructures of CsPbBr3 Perovskite Nanocrystals with Post-transition Metal Bismuth

The facet chemistry of halide perovskite nanocrystals plays a key role in designing nanoscale epitaxial heterostructures. However, despite significant successes achieved in designing these nanocrystals, their heterostructures with several leading transition metals could not be established yet. Herein, the possible heterostructures of metals beyond transition metals are explored and the epitaxial combinations of soft CsPbBr3 nanocrystals with the post-transition metal Bi(0) are reported. These heterostructures are built with interfacing facets having hexagonal atomic configurations of both the rhombicuboctahedron CsPbBr3 and octahedral Bi(0). A high reaction temperature and the presence of alkylamine kept Bi(III) in reduced form and helped in sustaining these CsPbBr3-Bi(0) heteronanocrystals. Since understanding of and synthesis optimization of metal-halide perovskite heterostructures are limited, this finding adds a new fundamental insight in designing ionic and nonionic materials heterojunctions. Furthermore, oxidation and sulfidation of Bi(0) are studied, and the possible oxide/sulfide heterostructures with CsPbBr3 are discussed.

Functional Alkali Metal-Based Ternary Chalcogenides: Design, Properties, and Opportunities

The search for novel materials has recently brought research attention to alkali metal-based chalcogenides (ABZ) as a new class of semiconducting inorganic materials. Various theoretical and computational studies have highlighted many compositions of this class as ideal functional materials for application in energy conversion and storage devices. This Perspective discusses the expansive compositional landscape of ABZ compositions that inherently gives a wide spectrum of properties with great potential for application. In the present paper, we examine the technique of synthesizing this particular class of materials and explore their potential for compositional engineering in order to manipulate key functional properties. This study presents the notable findings that have been documented thus far in addition to outlining the potential avenues for implementation and the associated challenges they present. By fulfilling the sustainability requirements of being relativity earth-abundant, environmentally benign, and biocompatible, we anticipate a promising future for alkali metal chalcogenides. Through this Perspective, we aim to inspire continued research on this emerging class of materials, thereby enabling forthcoming breakthroughs in the realms of photovoltaics, thermoelectrics, and energy storage.

Colloidal synthesis of the mixed ionic-electronic conducting NaSbS2 nanocrystals

Solution-based synthesis of mixed ionic and electronic conductors (MIECs) has enabled the development of novel inorganic materials with implications for a wide range of energy storage applications. However, many technologically relevant MIECs contain toxic elements (Pb) or are prepared by using traditional high-temperature solid-state synthesis. Here, we provide a simple, low-temperature and size-tunable (50-90 nm) colloidal hot injection approach for the synthesis of NaSbS2 based MIECs using widely available and non-toxic precursors. Key synthetic parameters (cationic precursor, reaction temperature, and ligand) are examined to regulate the shape and size of the NaSbS2 nanocrystals (NCs). FTIR studies revealed that ligands with carboxylate functionality are coordinated to the surface of the synthesized NaSbS2 NCs. The synthesized NaSbS2 nanocrystals have electronic and ionic conductivities of 3.31 × 10-10 (e-) and 1.9 × 10-5 (Na+) S cm-1 respectively, which are competitive with the ionic and electrical conductivities of perovskite materials generated by solid-state reactions. This research gives a mechanistic understanding and post-synthetic evaluation of parameters influencing the formation of sodium antimony chalcogenides materials.

Colloidal Synthesis of Multinary Alkali-Metal Chalcogenides Containing Bi and Sb: An Emerging Class of I-V-VI2 Nanocrystals with Tunable Composition and Interesting Properties

The growth mechanism and synthetic controls for colloidal multinary metal chalcogenide nanocrystals (NCs) involving alkali metals and the pnictogen metals Sb and Bi are unknown. Sb and Bi are prone to form metallic nanocrystals that stay as impurities in the final product. Herein, we synthesize colloidal NaBi_1-xSb_xSe_2-yS_y NCs using amine-thiol-Se chemistry. We find that ternary NaBiSe₂ NCs initiate with Bi⁰ nuclei and an amorphous intermediate nanoparticle formation that gradually transforms into NaBiSe₂ upon Se addition. Furthermore, we extend our methods to substitute Sb in place of Bi and S in place of Se. Our findings show the initial quasi-cubic morphology transforms into a spherical shape upon increased Sb substitution, and the S incorporation promotes elongation along the <111> direction. We further investigate the thermoelectric transport properties of the Sb-substituted material displaying very low thermal conductivity and n-type transport behavior. Notably, the NaBi_0.75Sb_0.25Se₂ material exhibits an ultralow thermal conductivity of 0.25 W·m^-1·K^-1 at 596 K with an average thermal conductivity of 0.35 W·m^-1·K^-1 between 358 and 596 K and a ZT_max of 0.24.

Multipod Bi(Cu2-xS)n Nanocrystals formed by Dynamic Cation-Ligand Complexation and Their Use as Anodes for Potassium-Ion Batteries

We report the formation of an intermediate lamellar Cu-thiolate complex, and tuning its relative stability using alkylphosphonic acids are crucial to enabling controlled heteronucleation to form Bi(Cu2-xS)n heterostructures with a tunable number of Cu2-xS stems on a Bi core. The denticity of the phosphonic acid group, concentration, and chain length of alkylphosphonic acids are critical factors determining the stability of the Cu-thiolate complex. Increasing the stability of the Cu-thiolate results in single Cu2-xS stem formation, and decreased stability of the Cu-thiolate complex increases the degree of heteronucleation to form multiple Cu2-xS stems on the Bi core. Spatially separated multiple Cu2-xS stems transform into a support network to hold a fragmented Bi core when used as an anode in a K-ion battery, leading to a more stable cycling performance showing a specific capacity of ∼170 mAh·g-1 after 200 cycles compared to ∼111 mAh·g-1 for Bi-Cu2-xS single-stem heterostructures.

Sulfur-source-dependent phase-selective preparation of Cu3NiInSnS6 nanocrystals and their optical and magnetic properties

Multifunctional multinary metal chalcogenides have long been a research hotspot in the field of materials chemistry due to their rich composition, flexible structure, excellent properties and wide range of applications. However, the exploration of complex quinary chalcogenides is still challenging. In this work, for the first time, we have developed the controlled synthesis of quinary Cu₃NiInSnS₆ nanocrystals, realizing the selective preparation of hexagonal wurtzite and cubic zinc blende metastable phases by simply tuning the sulfur source. The phase structure analysis reveals that both metastable phases possess a disordered structure with a random distribution of metal atoms in the unit cells. The fabricated wurtzite and zinc blende-structure Cu₃NiInSnS₆ nanocrystals have a direct band gap of 1.82 and 1.94 eV, respectively, and both exhibit superparamagnetic behavior at low temperatures. This work is of great significance for the development of novel multifunctional materials based on metastable multinary metal chalcogenide phases.