Phospholipid-Mimetic Aggregation-Induced Emission Luminogens for Specific Elimination of Gram-Positive and Gram-Negative Bacteria

A biguanide chitosan-based hydrogel adhesive accelerates the healing of bacterial-infected wounds

The development of tissue adhesives with good biocompatibility and potent antimicrobial properties is crucial for addressing the high incidence of surgical site infections in emergency and clinical settings. Herein, an injectable hydrogel adhesive composed of chitosan biguanidine (CSG), oxidized dextran (ODex) and tannin (TA) was synthesized primarily through Schiff-base reactions, hydrogen bonding, and electrostatic interactions. TA was introduced into the CSG/ODex hydrogel to prepare a physicochemically double cross-linked hydrogel. The hydrogel formulation incorporating 2 wt% TA (CSG/ODex-TA2) exhibited rapid gelation, moderate mechanical properties, good tissue adhesion, and sustained release behavior of TA. Both in vitro and in vivo studies demonstrated that CSG/ODex-TA2 showed significantly enhanced adhesion and antibacterial effectiveness compared to the CSG/ODex hydrogel and commercial fibrin glue. Leveraging the positive charge of CSG, the CSG/ODex-TA2 hydrogel demonstrated a strong contact antibacterial effect, while the sustained release of TA provided diffusion antibacterial capabilities. By integrating contact and diffusion antibacterial mechanisms into the hydrogel, a promising approach was developed to boost antibacterial efficiency and accelerate the healing of wounds infected with methicillin-resistant Staphylococcus aureus (MRSA). The CSG/ODex-TA2 hydrogel has excellent biocompatibility, hemostatic properties, and antibacterial capabilities, making it a promising candidate for improving in vivo wound care and combating bacterial infections.

Quaternized antimicrobial peptide mimics based on harmane as potent anti-MRSA agents by multi-target mechanism covering cell wall, cell membrane and intracellular targets

Infectious disease caused by methicillin-resistant Staphylococcus aureus (MRSA) seriously threatens public health. The design of antimicrobial peptide mimics (AMPMs) based on natural products (NPs) is a new strategy to kill MRSA and slow the development of drug resistance recently. Here, we reported the design and synthesis of novel AMPMs based on harmane skeleton. Notably, compound 9b exhibited comparable or even better anti-MRSA activity in vitro and in vivo with minimum inhibitory concentration (MIC) of 0.5-2 μg/mL than the positive drug vancomycin. The highly active compound 9b not only showed low cytotoxicity, no obvious hemolysis and good plasma stability, but also presented low tendency of developing resistance. Anti-MRSA mechanism revealed that compound 9b could destroy cell wall structure by interacting with lipoteichoic acid and peptidoglycan, cause membrane damage by depolarization, increased permeability and destructed integrity, reduce cell metabolic activity by binding to lactate dehydrogenase (LDH), interfere cellular redox homeostasis, and bind to DNA. Overall, compound 9b killed the MRSA by multi-target mechanism, which provide a promising light for combating the growing MRSA resistance.

Charge-regulated fluorescent anchors enable high-fidelity tracking of plasma membrane dynamics during biological events

Many biological processes generally require long-term visualization tools for time-scale dynamic changes of the plasma membrane, but there is still a lack of design rules for such imaging tools based on small-molecule fluorescent probes. Herein, we revealed the key regulatory roles of charge number and species of fluorescent dyes in the anchoring ability of the plasma membrane and found that the introduction of multi-charged units and appropriate charge species is often required for fluorescent dyes with strong plasma membrane anchoring ability by systematically investigating the structure-function relationship of cyanostyrylpyridium (CSP) dyes with different charge numbers and species and their imaging performance for the plasma membrane. The CSP-DBO dye constructed exhibits strong plasma membrane anchoring ability in staining the plasma membrane of cells, in addition to many other advantages such as excellent biocompatibility and general universality of cell types. Such a fluorescent anchor has been successfully used to monitor chemically induced plasma membrane damage and dynamically track various cellular biological events such as cell fusion and cytokinesis over a long period of time by continuously monitoring the dynamic morphological changes of the plasma membrane, providing a valuable precise visualization tool to study the physiological response to chemical stimuli and reveal the structural morphological changes and functions of the plasma membrane during these important biological events from a dynamic perspective. Furthermore, CSP-DBO exhibits excellent biocompatibility and imaging capability in vivo such as labelling the plasma membrane in vivo and monitoring the metabolic process of lipofuscin as an aging indicator.

Renal Clearable Nanodots-Engineered Erythrocytes with Enhanced Circulation and Tumor Accumulation for Photothermal Therapy of Hepatocellular Carcinoma

Living cell-mediated nanodelivery system is considered a promising candidate for targeted antitumor therapy; however, their use is restricted by the adverse interactions between carrier cells and nanocargos. Herein, a novel erythrocyte-based nanodelivery system is developed by assembling renal-clearable copper sulfide (CuS) nanodots on the outer membranes of erythrocytes via a lipid fusion approach, and demonstrate that it is an efficient photothermal platform against hepatocellular carcinoma. After intravenous injection of the nanodelivery system, CuS nanodots assembled on erythrocytes can be released from the system, accumulate in tumors in response to the high shear stress of bloodstream, and show excellent photothermal antitumor effect under the near infrared laser irradiation. Therefore, the erythrocyte-mediated nanodelivery system holds many advantages including prolonged blood circulation duration and enhanced tumor accumulation. Significantly, the elimination half-life of the nanodelivery system is 74.75 ± 8.77 h, which is much longer than that of nanodots (33.56 ± 2.36 h). Moreover, the other two kinds of nanodots can be well assembled onto erythrocytes to produce other erythrocyte-based hitchhiking platforms. Together, the findings promote not only the development of novel erythrocyte-based nanodelivery systems as potential platforms for tumor treatment but also their further clinical translation toward personalized healthcare.

Microneedle System with Biomarker-Activatable Chromophore as Both Optical Imaging Probe and Anti-bacterial Agent for Combination Therapy of Bacterial-Infected Wounds and Outcome Monitoring

Wounds infected with bacteria, if left untreated, have the potential to escalate into life-threatening conditions, such as sepsis, which is characterized by widespread inflammation and organ damage. A comprehensive approach to treating bacterial-infected wounds, encompassing the control of bacterial infection, biofilm eradication, and inflammation regulation, holds significant importance. Herein, a microneedle (MN) patch (FM@ST MN) has been developed, with silk fibroin (SF) and tannic acid-based hydrogel serving as the matrix. Encapsulated within the MNs are the AIEgen-based activatable probe (FQ-H2O2) and the NLRP3 inhibitor MCC950, serving as the optical reporter/antibacterial agent and the inflammation regulator, respectively. When applied onto bacterial-infected wounds, the MNs in FM@ST MN penetrate bacterial biofilms and gradually degrade, releasing FQ-H2O2 and MCC950. The released FQ-H2O2 responds to endogenously overexpressed reactive oxygen species (H2O2) at the wound site, generating a chromophore FQ-OH which emits noticeable NIR-II fluorescence and optoacoustic signals, enabling real-time imaging for outcome monitoring; and this chromophore also exhibits potent antibacterial capability due to its dual positive charges and shows negligible antibacterial resistance. However, the NLRP3 inhibitor MCC950, upon release, suppresses the activation of NLRP3 inflammasomes, thereby mitigating the inflammation triggered by bacterial infections and facilitating wound healing. Furthermore, SF in FM@ST MN aids in tissue repair and regeneration by promoting the proliferation of epidermal cells and fibroblasts and collagen synthesis. This MN system, free from antibiotics, holds promise as a solution for treating and monitoring bacterially infected wounds without the associated risk of antimicrobial resistance.

Controllable Assembly of Cu2+ and Chlorin E6 for H2 S-Activatable Recognition of Bacterial Infection and Enhanced Antibacterial Therapy

Antibacterial photodynamic therapy (APDT) has emerged as one of the intriguing strategies to combat bacterial resistance. However, the antibacterial efficacy of APDT is found to be severely impacted by the hydrogen sulfide (H2 S)-overproduced bacterial infection microenvironment. Herein, a multifunctional APDT platform is developed by assembling Cu2+ and chlorin e6 (Ce6), which exhibits unique H2 S-activatable fluorescence (FL) and antibacterial features. Noteworthily, the assembly conditions are crucial for achievement of Cu-Ce6 nanoassemblies (NAs) with the on-demand responsive properties. The quenched FL and photosensitization of Cu-Ce6 NAs can be selectively activated by the overexpressed H2 S in infected area, enabling specific recognition of bacterial infection and localized antibacterial therapy with minimized side effects. Significantly, amplified oxidative stress is achieved owning to the effective consumption of H2 S by Cu2+ in the NAs, leading to an enhanced APDT. The antibacterial mechanisms including broad-spectrum APDT activity of released Ce6, inherent sterilization effects of produced copper polysulfides and the accompanying disturbance of bacterial sulphide metabolism are further identified. This study may pave a new avenue for the rational design of intelligent APDT platform using minimalist biological building units and thus facilitating the clinical translation of nano-antibacterial agents.

Symmetrical Localized Built-in Electric Field by Induced Polarization Effect in Ionic Covalent Organic Frameworks for Selective Imaging and Killing Bacteria

Photocatalytic materials are some of the most promising substitutes for antibiotics. However, the antibacterial efficiency is still inhibited by the rapid recombination of the photogenerated carriers. Herein, we design a cationic covalent organic framework (COF), which has a symmetrical localized built-in electric field due to the induced polarization effect caused by the electron-transfer reaction between the Zn-porphyrin unit and the guanidinium unit. Density functional theory calculations indicate that there is a symmetrical electrophilic/nucleophilic region in the COF structure, which results from increased electron density around the Zn-porphyrin unit. The formed local electric field can further inhibit the recombination of photogenerated carriers by driving rapid electron transfer from Zn-porphyrin to guanidinium under light irradiation, which greatly increases the yield of reactive oxygen species. This COF wrapped by DSPE-PEG2000 can selectively target the lipoteichoic acid of Gram-positive bacteria by electrostatic interaction, which can be used for selective discrimination and imaging of bacteria. Furthermore, this nanoparticle can rapidly kill Gram-positive bacteria including 99.75% of Staphylococcus aureus and 99.77% of Enterococcus faecalis at an abnormally low concentration (2.00 ppm) under light irradiation for 20 min. This work will provide insight into designing photoresponsive COFs through engineering charge behavior.

Flexible Modulation of Cellular Activities with Cationic Photosensitizers: Insights of Alkyl Chain Length on Reactive Oxygen Species Antimicrobial Mechanisms

Cationic photosensitizers have good binding ability with negatively charged bacteria and fungi, exhibiting broad applications potential in antimicrobial photodynamic therapy (aPDT). However, cationic photosensitizers often display unsatisfactory transkingdom selectivity between mammalian cells and pathogens, especially for eukaryotic fungi. It is unclear which biomolecular sites are more efficient for photodynamic damage, owing to the lack of systematic research with the same photosensitizer system. Herein, a series of cationic aggregation-induced emission (AIE) derivatives (CABs) (using berberine (BBR) as the photosensitizers core) with different length alkyl chains are successfully designed and synthesized for flexible modulation of cellular activities. The BBR core can efficiently produce reactive oxygen species (ROS) and achieve high-performance aPDT . Through the precise regulation of alkyl chain length, different bindings, localizations, and photodynamic killing effects of CABs are achieved and investigated systematically among bacteria, fungi, and mammalian cells. It is found that intracellular active substances, not membranes, are more efficient damage sites of aPDT. Moderate length alkyl chains enable CABs to effectively kill Gram-negative bacteria and fungi with light, while still maintaining excellent mammalian cell and blood compatibility. This study is expected to provide systematic theoretical and strategic research guidance for the construction of high-performance cationic photosensitizers with good transkingdom selectivity.

Aggregation-Induced Emission (AIE), Life and Health

Light has profoundly impacted modern medicine and healthcare, with numerous luminescent agents and imaging techniques currently being used to assess health and treat diseases. As an emerging concept in luminescence, aggregation-induced emission (AIE) has shown great potential in biological applications due to its advantages in terms of brightness, biocompatibility, photostability, and positive correlation with concentration. This review provides a comprehensive summary of AIE luminogens applied in imaging of biological structure and dynamic physiological processes, disease diagnosis and treatment, and detection and monitoring of specific analytes, followed by representative works. Discussions on critical issues and perspectives on future directions are also included. This review aims to stimulate the interest of researchers from different fields, including chemistry, biology, materials science, medicine, etc., thus promoting the development of AIE in the fields of life and health.