Encapsulating Amidoximated Nanofibrous Aerogels within Wood Cell Tracheids for Efficient Cascading Adsorption of Uranium Ions

Insight into the Enhanced Removal of U(VI) with Fe-Ni Bimetallic Particles Loaded on Biochar

This work develops Fe-Ni particles loaded on biochar (Fe-Ni/BC) to remove U(VI) efficiently. Fe-Ni bimetallic particles loaded on biochar (BC) can improve stability and reactivity, and the mesoporous structure of BC can effectively reduce Fe0 aggregation. The removal ability of Fe-Ni/BC is higher than that of Fe-Ni, BC, and Fe/BC. With the aid of kinetics and isotherms, the removal data were fitted by the pseudo-second-order kinetic model (R2 ≥ 0.999) and Langmuir model (R2 ≥ 0.94). Meanwhile, Fe-Ni/BC exhibited the largest removal capacity of 250.78 mg/g for U(VI) at pH 5.0 and a temperature of 303 K. Removing uranium using Fe-Ni/BC was carried out in the following steps: First, U(VI) in the solution was sorbed onto the Fe-Ni/BC surface through chemical bonds. Second, Fe(II) and Fe0 contributed to the U(VI) reduction process. At the same time, Fe-Ni formed a primary cell and underwent electron transfer. Moreover, Ni0 adsorbed H2 generated by Fe0 corrosion, forming Ni-H to prevent agglomeration and reduce U(VI). The results indicate that Fe-Ni bimetallic particles loaded on biochar enhance the removal of U(VI) by sorption-reduction synergistic effect. This work offers valuable insights into the design of bimetallic nanomaterials for environmental remediation of U(VI) contamination.

3D-Porous Carbon Nitride Through Proton Regulation and Photocatalytic Synergy for Efficient Uranium Extraction From Seawater

Extracting uranium from seawater is crucial for tapping oceanic resources vital to future energy supply. This study synthesized a novel nitrogen vacancy carbon nitride (NCN) grafted polyethyleneimine (PEI) composite material (NCNP). Experiments and molecular dynamics simulations reveal that NCNP effectively hinders the diffusion of uranyl ions (UO2 2+) to the NCN surface, thereby inhibiting electron transfer reactions. This is primarily achieved by the PEI layer, which repels UO2 2+ and prevents its direct contact with the NCN surface. Water-soluble O2 can still diffuse to the NCN surface for reduction reactions, ensuring the reduction performance of NCNP. The introduction of PEI enhances the proton affinity of the material. Under acidic conditions, protons (H+) bind with PEI, reducing competition between protons and uranyl ions for adsorption on the NCN surface. Under alkaline conditions, protons detach from PEI, facilitating H2O2 generation and promoting uranium extraction. This dynamic proton regulation allows NCNP to perform effectively under varying pH conditions. Experimental results show that NCNP achieves a uranium extraction capacity of 498.7 mg g-1 in uranium-spiked simulated seawater, which is significantly higher than that of unmodified carbon nitride (CN), which is one of the highest performances for simulating seawater uranium extraction.

Fabrication of superporous cryogels with amidoxime chelation sites and customizable 3D printing for targeted palladium recovery from secondary resources

Recovering precious metals such as palladium from secondary resources faces significant challenges, including the scarcity of efficient adsorbents capable of withstanding harsh acidic conditions and needing materials with high selectivity, mechanical stability, and scalability. In response to these challenges, we developed highly porous cryogels functionalized with sulfonic and amidoxime groups, achieving a unique combination of hydrophilicity, flexibility, and selectivity for Pd(II) ions. Using a redox cryopolymerization method, these cryogels attained a gel fraction of 100 % and a maximum adsorption capacity of 425.3 mg g-1 at 318 K, as the Langmuir isotherm model fitted. This work also combined 3D printing technology with cryopolymerization to create a highly selective, high mechanical strength and customizable shape adsorption material, overcoming traditional adsorption materials' limitations in acid conditions. This innovative combination fills the gap in selective palladium recovery in customizable super macroporous materials, offering a sustainable solution for precious metal recovery and setting a foundation for broader applications in adsorption separation.

Nano-tentacled interconnected channels organic gel for rapid uranium extraction from seawater

Due to dwindling terrestrial uranium resources and escalating ecological pressures, the long-term viability of uranium supply has become a critical concern. The immense uranium reserves in seawater present a potential solution, yet extraction technology faces dual challenges of efficiency and adaptability to complex marine environments. Current interconnected porous adsorbents, despite their high flux properties, are limited by low specific surface area and weak mechanical strength, which constrain their effectiveness. Here, inspired by the unique hierarchical structures of marine organisms, we describe an organic gel adsorbent with supermacroporous and interconnected channels (10 ∼ 100 µm) adorned with "nano-tentacle" structures. This design significantly enhances the specific surface area by 18 times, increasing adsorption sites and imparting antibacterial properties. Notably, this adsorbent maintains structural integrity and superior mechanical strength (1.32 MPa tensile and 2.44 MPa compressive strength) even when fully saturated. During a 23-day trial in natural seawater, a uranium adsorption rate of 0.332 mg g⁻¹ day⁻¹ was achieved. This work offers a pioneering approach for the design and fabrication of hierarchical structured adsorbents, highlighting the immense potential of extracting uranium from seawater for sustainable energy production.

Constructing Ce-OH groups on CeO2 for enhancing removal and recovery of uranium from wastewater and seawater

Efficient recovery of uranium from wastewater and seawater provides an important guarantee for the sustainable growth of nuclear energy. Herein, we skillfully use the alkali etching method to construct CeO2 hollow spheres rich in Ce-OH groups for the removal and recovery of uranium from water matrixes. It is found that the CeO2 exhibits fast adsorption kinetics (equilibrium time within 10 min) and moderate adsorption capacity (143.1 mg/g), and the removal efficiency of low concentration uranium (0.1 g/L and 1 g/L) reaches 100% within 1 min of adsorption. Moreover, the adsorption of uranium by CeO2 is almost unaffected by common anions and cations in the environment, even if the concentration of anions is 1000 times that of uranium. More importantly, the CeO2 can enrich uranium concentration in seawater by 167.9 times and the recovery rate reaches 83.9%. Mechanistic studies reveal that the adsorption of uranium by CeO2 is mainly attributed to the rich Ce-OH groups on the surface of CeO2, resulting in the rapid adsorption of U(VI) and mainly forms a single-bridge model. The findings of this study provide a green and efficient path for the removal and recovery of uranium from wastewater and seawater.

Facile and scalable synthesis of functionalized hierarchical porous polymers for efficient uranium adsorption

Efficient uranium capture from wastewater holds great importance for the environmental remediation and sustainable development of nuclear energy, but it is a tremendous challenge. Herein, a facile and scalable approach is reported to fabricate functionalized hierarchical porous polymers (PPN-3) decorated with high density of phosphate groups for uranium adsorption. The as-constructed hierarchical porous structure could allow rapid diffusion of uranyl ions, while abundant phosphate groups that serve as adsorption sites could provide the high affinity for uranyl. Consequently, PPN-3 shows a high uranium adsorption uptake of 923.06 mg g-1 and reaches adsorption equilibrium within simply 10 min in uranium-spiked aqueous solution. Moreover, PPN-3 affords selective adsorption of uranyl over multiple metal ions and possesses a rapid and high removal rate of U(VI) in real water systems. Furthermore, this study offers direct polymerization strategy for the cost-effective fabrication of phosphate-functionalized porous organic polymers, which may provide promising application potential for uranium extraction.

One particle three targets: Phosphate anion-modified magnetic mesoporous silica with enhanced fluorescence for sensitive detection, efficient adsorption, and repeated removal of uranium (VI) ions

An ideal adsorbent material that combines the multiple capabilities of sensitive detection, efficient adsorption, and repeatable removal of uranium (U) from the environment remains a serious challenge. Herin, a general method was developed for synthesizing a series of phosphate anions (such as: PO43-, P2O74-, P3O105- and P6O186-) modified magnetic mesoporous silica nanoparticles (Fe3O4 @mSiO2-Zn2+ NPs). The mesoporous surfaces and abundant phosphate groups provide potential, powerful uranium-binding sites for capturing U(VI) ions. Especially, the optimum adsorption capacity of Fe3O4 @mSiO2-Zn2+/P3O105- NPs was as high as 885.90 mg·g-1 (298 K), which was higher than that of unmodified or other phosphate anions-modified Fe3O4 @mSiO2-Zn2+ NPs. Meanwhile, P3O105--binding sites and mesoporous surfaces also strongly restrict U(VI) ions' fluorescence vibrational inactivation, the adsorption results in rapid green fluorescence enhancement (within 180 s), and an ultra-low detection limit (4.5 nmol·L-1), which is well below the standard in drinking water of the World Health Organization (WHO). Furthermore, even after 5 cycles, the adsorbent still maintained their original adsorption capacity of 80.21% and displayed excellent selectivity for detecting and removing U(VI) from seawater. Based on these results, the Fe3O4 @mSiO2-Zn2+/P3O105- NPs seem to be a suitable multifunctional adsorbent for the detection, adsorption, and removal of U(VI) from environment.

In Situ Growth of MOF from Wood Aerogel toward Bromide Ion Adsorption in Simulated Saline Water

Utilizing metal-organic framework (MOF) materials for the extraction of bromide ions (Br-) from aqueous solutions, as an alternative to chlorine gas oxidation technology, holds promising potential for future applications. However, the limitations of powdered MOFs, such as low utilization efficiency, ease of aggregation in water, and challenging recovery processes, have hindered their practical application. Shaping MOF materials into application-oriented forms represents an effective but challenging approach to address these drawbacks. In this work, a novel Ag-UiO-66-(OH)2@delignified wood cellulose aerogel (CA) adsorbent is synthesized using an oil bath impregnation method, involving the deposition of UiO-66-(OH)2 nanoparticles onto CA and the uniform dispersion of Ag0 nanoparticles across its surface. CA, characterized by the intertwined cellulose nanofiber structure and a highly hydrophilic surface, serves as an ideal substrate for the uniform growth of UiO-66-(OH)2 nanoparticles, which, in turn, spontaneously reduce Ag+ to form distributed Ag0 nanoparticles due to the abundant hydroxyl groups provided. Leveraging the well-defined biological structure of CA, which offers excellent mass transfer channels, and the highly dispersed Ag adsorption sites, Ag-UiO-(OH)2/CA exhibits remarkable adsorption capacity (642 mg/gAg) under optimized conditions. Furthermore, an integrated device is constructed by interconnecting Ag-UiO-(OH)2/CA adsorbents in series, affirming its potential application in the continuous recovery of Br-. This study not only presents an efficient Ag-UiO-(OH)2/CA adsorbent for Br- recovery but also sheds light on the extraction of other valuable elements from various liquid ores.

Loofah-inspired sodium alginate/carboxymethyl cellulose sodium-based porous frame for all-weather super-viscous crude oil adsorption and wastewater treatment in harsh environment

Solar-driven viscosity reduction of highly viscous crude oil has emerged as an environmentally friendly method to address large-scale oil spills. However, the challenge lies in the limited availability of sunlight during cloudy days and at night, which hinders the effectiveness of green advanced porous materials. This study developed all-weather-available advanced porous materials in the form of loofah-like structured porous frame composed of 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane/MXene/carbon nanotubes (CNTs)/sodium alginate (SA)/carboxymethyl cellulose sodium (NaCMC). MXene and CNTs formed a continuous and stable network that enabled PMCSCPs to rapidly reduce crude oil viscosity for all-day based on photothermal and electrothermal conversions. Additionally, loofah-like porous structure and oriented pipeline biomass skeleton endowed PMCSCPs with stable and rapid adsorption capacity and speed. Considering the complexity of the external environment and oily wastewater composition, we verified the separation performance of PMCSCPs for metal ions and dyes and the ice-breaking ability under icy conditions. PMCSCPs provided a novel approach to achieving clean, high-efficiency, all-day remediation of ultra-viscous crude oil. This "Three birds with one stone" approach is expected to be obtained from nature and used on a large scale, replacing conventional porous adsorbent materials.

Uranium extraction from seawater: material design, emerging technologies and marine engineering

Uranium extraction from seawater (UES), a potential approach to securing the long-term uranium supply and sustainability of nuclear energy, has experienced significant progress in the past decade. Promising adsorbents with record-high capacities have been developed by diverse innovative synthetic strategies, and scale-up marine field tests have been put forward by several countries. However, significant challenges remain in terms of the adsorbents' properties in complex marine environments, deployment methods, and the economic viability of current UES systems. This review presents an up-to-date overview of the latest advancements in the UES field, highlighting new insights into the mechanistic basis of UES and the methodologies towards the function-oriented development of uranium adsorbents with high adsorption capacity, selectivity, biofouling resistance, and durability. A distinctive emphasis is placed on emerging electrochemical and photochemical strategies that have been employed to develop efficient UES systems. The most recent achievements in marine tests by the major countries are summarized. Challenges and perspectives related to the fundamental, technical, and engineering aspects of UES are discussed. This review is envisaged to inspire innovative ideas and bring technical solutions towards the development of technically and economically viable UES systems.