Ferroelectrically Modulated and Enhanced Photoresponse in a Self-Powered α-In2Se3/Si Heterojunction Photodetector

Progress in Advanced Infrared Optoelectronic Sensors

Infrared optoelectronic sensors have attracted considerable research interest over the past few decades due to their wide-ranging applications in military, healthcare, environmental monitoring, industrial inspection, and human-computer interaction systems. A comprehensive understanding of infrared optoelectronic sensors is of great importance for achieving their future optimization. This paper comprehensively reviews the recent advancements in infrared optoelectronic sensors. Firstly, their working mechanisms are elucidated. Then, the key metrics for evaluating an infrared optoelectronic sensor are introduced. Subsequently, an overview of promising materials and nanostructures for high-performance infrared optoelectronic sensors, along with the performances of state-of-the-art devices, is presented. Finally, the challenges facing infrared optoelectronic sensors are posed, and some perspectives for the optimization of infrared optoelectronic sensors are discussed, thereby paving the way for the development of future infrared optoelectronic sensors.

Polarizable Nonvolatile Ferroelectric Gating in Monolayer MoS2 Phototransistors

Given the requirements for power and dimension scaling, modulating channel transport properties using high gate bias is unfavorable due to the introduction of severe leakages and large power dissipation. Hence, this work presents an ultrathin phototransistor with chemical-vapor-deposition-grown monolayer MoS2 as the channel and a 10.2 nm thick Al:HfO2 ferroelectric film as the dielectric. The proposed device is meticulously modulated utilizing an Al:HfO2 nanofilm, which passivates traps and suppresses charge Coulomb scattering with Al doping, efficiently improving carrier transport and inhibiting leakage current. Furthermore, a bipolar pulses excitable polarization method is developed to induce a nonvolatile electrostatic field. The MoS2 channel is fully depleted by the switchable and stable floating gate originating from remanent polarization, leading to a high detectivity of 2.05 × 1011 Jones per nanometer of gating layer (Jones nm-1) and photocurrent on/off ratio >104 nm-1, which are superior to the state-of-the-art phototransistors based on two-dimensional (2D) materials and ferroelectrics. The proposed polarizable nonvolatile ferroelectric gating in a monolayer MoS2 phototransistor promises a potential route toward ultrasensitive photodetectors with low power consumption that boast of high levels of integration.

Hierarchical processing enabled by 2D ferroelectric semiconductor transistor for low-power and high-efficiency AI vision system

The growth of data and Internet of Things challenges traditional hardware, which encounters efficiency and power issues owing to separate functional units for sensors, memory, and computation. In this study, we designed an α-phase indium selenide (α-In2Se3) transistor, which is a two-dimensional ferroelectric semiconductor as the channel material, to create artificial optic-neural and electro-neural synapses, enabling cutting-edge processing-in-sensor (PIS) and computing-in-memory (CIM) functionalities. As an optic-neural synapse for low-level sensory processing, the α-In2Se3 transistor exhibits a high photoresponsivity (2855 A/W) and detectivity (2.91 × 1014 Jones), facilitating efficient feature extraction. For high-level processing tasks as an electro-neural synapse, it offers a fast program/erase speed of 40 ns/50 µs and ultralow energy consumption of 0.37 aJ/spike. An AI vision system using α-In2Se3 transistors has been demonstrated. It achieved an impressive recognition accuracy of 92.63% within 12 epochs owing to the synergistic combination of the PIS and CIM functionalities. This study demonstrates the potential of the α-In2Se3 transistor in future vision hardware, enhancing processing, power efficiency, and AI applications.

Ferroelectricity-Driven Self-Powered Weak Temperature and Broadband Light Detection in MoS2/CuInP2S6/WSe2 van der Waals Heterojunction Nanoarchitectonics

Two-dimensional ferroelectric materials enrich the modulation degrees of freedom in self-powered van der Waals temperature/light detectors by incorporating pyroelectric and bulk photovoltaic effects. However, in addition to the low polarization, the practical applications of these materials are limited due to the significant challenge posed by their ultrathin nature, which affects their polarization stability. In this report, we introduce a design for a dual heterostructure-stabilized van der Waals heterojunction that addresses this challenge by improving the performance and extending the operational lifetime of self-powered van der Waals temperature/light detectors. The design is demonstrated using the MoS2/CuInP2S6 (CIPS)/WSe2 van der Waals heterojunction, which exhibits sensitivity to small temperature changes induced by weak light across the ultraviolet to mid-infrared spectrum. It can generate a noticeable pyroelectric current without the need for an external voltage, and its pyroelectric coefficient exceeds 130 and 978 μC/m2 K for 45 and 70 nm CIPS, respectively. The heterojunction offers high detection accuracy, with a temperature variation sensitivity as small as 0.1 K and an optical power intensity detection range from low to 1 μW/cm2. Additionally, the heterojunction exhibits exceptional detectivity (D*) for different light wavelengths. Remarkably, the self-powered detection performance remains stable for months without obvious degradation in the natural environment. These results offer a promising solution for high-performance, self-sustaining temperature/light detection applications and pave the way for the development of future ferroelectricity-driven photodetection technologies.

Self-Driven Gr/WSe2/Gr Photodetector with High Performance Based on Asymmetric Schottky van der Waals Contacts

Two-dimensional (2D) self-driven photodetectors have a wide range of applications in wearable, imaging, and flexible electronics. However, the preparation of most self-powered photodetectors is still complex and time-consuming. Simultaneously, the constant work function of a metal, numerous defects, and a large Schottky barrier at the 2D/metal interface hinder the transmission and collection of optical carriers, which will suppress the optical responsivity of the device. This paper proposed a self-driven graphene/WSe2/graphene (Gr/WSe2/Gr) photodetector with asymmetric Schottky van der Waals (vdWs) contacts. The vdWs contacts are formed by transferring Gr as electrodes using the dry-transfer method, obviating the limitations of defects and Fermi-level pinning at the interface of electrodes made by conventional metal deposition methods to a great extent and resulting in superior dynamic response, which leads to a more efficient and faster collection of photogenerated carriers. This work also demonstrates that the significant surface potential difference of Gr electrodes is a crucial factor to ensure their superior performance. The self-driven Gr/WSe2/Gr photodetector exhibits an ultrahigh Ilight/Idark ratio of 106 with a responsivity value of 20.31 mA/W and an open-circuit voltage of 0.37 V at zero bias. The photodetector also has ultrafast response speeds of 42.9 and 56.0 μs. This paper provides a feasible way to develop self-driven optoelectronic devices with a simple structure and excellent performance.

Polarization enhanced photoresponse of InSe via 2D ferroelectric CuCrP2S6

Two-dimensional CuCrP2S6 possesses significant potential for low-power non-volatile devices owing to its multiferroic properties. Nonetheless, comprehensive investigations regarding the modulation of CuCrP2S6 polarization for enhancing semiconductor photodetection capabilities and its potential applications in ferroelectric non-volatile devices are still relatively scarce. In this study, we present a novel, non-volatile, tunable photodetector engineered through the integration of a ferroelectric heterostructure comprising CuCrP2S6 and InSe. Our findings reveal that distinct ferroelectric polarization states of CuCrP2S6 exert varying modulation effects on the InSe photodetection performance. Notably, optimized results give a responsivity of 1839 A W-1 and a detectivity of 1.9 × 1012 Jones at a 300 nm wavelength, featuring a substantial 20.7-fold difference in responsivity between the two polarization states. This investigation underscores the immense potential of CuCrP2S6 in the development of non-volatile, multi-state optoelectronic devices.

A polar-switchable and controllable negative phototransistor for information encryption

Anomalous negative phototransistors have emerged as a distinct research area, characterized by a decrease in channel current under light illumination. Recently, their potential applications have been expanded beyond photodetection. Despite the considerable attention given to negative phototransistors, negative photoconductance (NPC) in particular remains relatively unexplored, with limited research advancements as compared to well-established positive phototransistors. In this study, we designed ferroelectric field-effect transistors (FeFETs) based on the WSe2/CIPS van der Waals (vdW) vertical heterostructures with a buried-gated architecture. The transistor exhibits NPC and positive photoconductance (PPC), demonstrating the significant role of ferroelectric polarization in the distinctive photoresponse. The observed inverse photoconductance can be attributed to the dynamic switching of ferroelectric polarization and interfacial charge transfer processes, which have been investigated experimentally and theoretically using Density Functional Theory (DFT). The unique phenomena enable the coexistence of controllable and polarity-switchable PPC and NPC. The novel feature holds tremendous potential for applications in optical encryption, where the specific gate voltages and light can serve as universal keys to achieve modulation of conductivity. The ability to manipulate conductivity in response to optical stimuli opens up new avenues for developing secure communication systems and data storage technologies. Harnessing this feature enables the design of advanced encryption schemes that rely on the unique properties of our material system. The study not only advances the development of NPC but also paves the way for more robust and efficient methods of optical encryption, ensuring the confidentiality and integrity of critical information in various domains, including data transmission, and information security.

A Silicon Sub-Bandgap Near-Infrared Photodetector with High Detectivity Based on Textured Si/Au Nanoparticle Schottky Junctions Covered with Graphene Film

We present a straightforward approach to develop a high-detectivity silicon (Si) sub-bandgap near-infrared (NIR) photodetector (PD) based on textured Si/Au nanoparticle (NP) Schottky junctions coated with graphene film. This is a photovoltaic-type PD that operates at 0 V bias. The texturing of Si is to trap light for NIR absorption enhancement, and Schottky junctions facilitate sub-bandgap NIR absorption and internal photoemission. Both Au NPs and the texturing of Si were made in self-organized processes. Graphene offers additional pathways for hot electron transport and to increase photocurrent. Under 1319 nm illumination at room temperature, a responsivity of 3.9 mA/W and detectivity of 7.2 × 10¹⁰ cm × (Hz)^1/2/W were obtained. Additionally, at -60 °C, the detectivity increased to 1.5 × 10¹¹ cm × (Hz)^1/2/W, with the dark current density reduced and responsivity unchanged. The result of this work demonstrates a facile method to create high-performance Si sub-bandgap NIR PDs for promising applications at ambient temperatures.