Hydrogen Bonding Stabilized Self-Assembly of Inorganic Nanoparticles: Mechanism and Collective Properties

Fluorescence "turn-on" sensing for five PDE5 inhibitors in functional food based on bimetallic nanoclusters

Some phosphodiesterase type-5 (PDE5) inhibitors are active ingredients of prescription drugs that are widely used in the treatment of erectile dysfunction (ED). Recently, a large number of substances with this activity have been developed. Illegal addition of PDE5 inhibitors to foods could lead to cardiovascular diseases and even death, which poses a serious threat to food safety, therefore an on-site rapid screening method is urgently needed. Herein, a host functionalized bimetallic nanoclusters, CD/Au Ag NCs, were synthesized through self-assembly of 6-Aza-2-thiothymine gold nanoclusters (ATT-Au NCs), Arginine silver nanoclusters (Arg-Ag NCs) and carboxymethyl β-cyclodextrin (β-CMCD). The introduction of Rhodamine 6G (R6G) could quench the fluorescence of CD/Au Ag NCs based on the inner filter effect (IFE) and fluorescence resonance energy transfer effect (FRET). Importantly, it was discovered that several PDE5 inhibitors exhibited a higher binding affinity to β-CMCD and could displace R6G binding with CD cavity, which disrupted the fluorescence quenching effects and resulted in the fluorescence recovery of CD/Au Ag NCs. This fluorescence turn-on signal could be utilized for the detection of PDE5 inhibitors. At present, emerging PDE5 inhibitor analogues pose a great challenge to food safety due to their unknown efficacy and safety. The proposed method holds the advantages of high sensitivity, simple probe synthesis, easy operation, and simultaneous detection of multiple PDE5 inhibitors. Meanwhile, the successful application in functional food sample demonstrated its high application potential in multiple PDE5 inhibitors screening.

Optical and Antibacterial Properties of Chiral Arginine-Stabilized ZnO Nanoparticles

The surface ligands of nanoparticles (NPs) play essential roles in material synthesis, properties, and applications. Chiral molecules have been the new hot topic in tuning the properties of inorganic NPs. Herein, l-arginine- and d-arginine-stabilized ZnO NPs were prepared, and the TEM, UV-vis, and PL spectra were investigated, which demonstrated that the l-arginine and d-arginine have different effects on the self-assembly and photoluminescence properties of ZnO NPs, showing an evident chiral effect. Furthermore, the results of the cell viability assays, plate counting method, and bacterial SEM images showed that ZnO@LA possessed lower biocompatibility and higher antibacterial efficiency than those of ZnO@DA, implying that the chiral molecules on the surface of nanomaterials may affect their bioproperties.

Self-assembly in biobased nanocomposites for multifunctionality and improved performance

Concerns of petroleum dependence and environmental pollution prompt an urgent need for new sustainable approaches in developing polymeric products. Biobased polymers provide a potential solution, and biobased nanocomposites further enhance the performance and functionality of biobased polymers. Here we summarize the unique challenges and review recent progress in this field with an emphasis on self-assembly of inorganic nanoparticles. The conventional wisdom is to fully disperse nanoparticles in the polymer matrix to optimize the performance. However, self-assembly of the nanoparticles into clusters, networks, and layered structures provides an opportunity to address performance challenges and create new functionality in biobased polymers. We introduce basic assembly principles through both blending and in situ synthesis, and identify key technologies that benefit from the nanoparticle assembly in the polymer matrix. The fundamental forces and biobased polymer conformations are discussed in detail to correlate the nanoscale interactions and morphology with the macroscale properties. Different types of nanoparticles, their assembly structures and corresponding applications are surveyed. Through this review we hope to inspire the community to consider utilizing self-assembly to elevate functionality and performance of biobased materials. Development in this area sets the foundation for a new era of designing sustainable polymers in many applications including packaging, construction chemicals, adhesives, foams, coatings, personal care products, and advanced manufacturing.

Aggregation induced emission behavior in oleylamine acetone system and its application to get improved photocurrent from In2S3 quantum dots

Blue emission giving nanoscale molecular clusters of Oleylamine-Acetone system was formed by an aging assisted hydrogen bond formation between the interacting molecular systems, at room temperature. The as-formed nanoscale molecular clusters were found to be self-assembled into flower-like aggregates and shifted the emission wavelength to red colour depicting an exciton delocalization in the aggregate system. Interestingly aging process has also produced imine type binding between Oleylamine and Acetone due to the condensation reaction. The experimental conditions and formation mechanism of hydrogen bond assisted Oleylamine-Acetone molecular aggregates and imine bond assisted Oleylamine-Acetone is elaborated in this paper in a systematic experimental approach with suitable theory. Finally we have introduced this Acetone assisted aging process in In2S3 QD system prepared with Oleylamine as functional molecules. It was found that the aging process has detached Oleylamine from QD surface and as a consequence In2S3 QD embedded Oleylamine-Acetone aggregates was obtained. When this In2S3 QD embedded molecular cluster system was used as an active layer in a photo conductor device then a maximum photo current value of the order of milli Ampere was obtained. The surfactant molecules normally inhibit the charge transport between QD systems and as a result it is always problematic to have the functional molecules in the QD based transport devices. Our approach has a solution to this problem and the present paper discusses the outcome of the results in detail.

Oriented assembly of CdS nanocrystals via dynamic surface modification-tailored particle interaction

The controlled assembly of quantum dots (QDs) remains a challenge due to the lack of in-depth understanding of the roles of ligand dynamics. In this study, tripods, particles, nanorods and nanoflowers of CdS with yellow, red and cyan PL emissions, respectively, were achieved through the coarsening of thioglycolic acid (TGA)-capped CdS QDs with a novel hydroxyl-TGA exchange procedure. Dynamic hydroxyl modification-induced aggregation and coalescence can help to describe the defects and the corresponding photoluminescence characteristics of these nanocrystals. A crystal growth model involving assembly and coalescence was developed to describe the crystal growth and the corresponding PL properties, where hydroxyl-motivated hydrogen-bonding interaction was used to explain the oriented assembly of CdS QDs.

Linear assembly of lead bromide-based nanoparticles inside lead(ii) polymers prepared by mixing the precursors of both the nanoparticle and the polymer

Preparation of 1D assemblies of lead halide-based nanoparticles inside a lead bromide polymer by concurrent formation of lead(ii) oligomers and the nanoparticles in the presence of cyclohexanemethylammonium bromide.

Supramolecular multicompartment gels formed by ABC graft copolymers: high toughness and recovery properties

We conceptually design multicompartment gels with supramolecular characteristics by taking advantage of amphiphilic ABC graft copolymers. The ABC graft copolymers contain a solvophilic A backbone and solvophobic B and C grafts, where the C grafts interact with each other via hydrogen bonds. The mechanical properties of supramolecular multicompartment gels under uniaxial tension are studied by coupling dissipative particle dynamics simulations with the nonequilibrium deformation technique. The results show that the supramolecular multicompartment gels exhibit high toughness and recovery properties, while their stiffness is maintained. Due to the physical origin, the superior mechanical properties of supramolecular gels have a tight relation with the structural relaxation of grafts and the association-disassociation dynamics of hydrogen bonds. In addition, the toughness of the multicompartment gels can be further tuned by adjusting the strength and directivity of the hydrogen bonds. The present work unveils the physical origin of the distinct mechanical properties of supramolecular gels, which may provide useful guidance for designing functional gels with superior toughness.

Light-Switchable Self-Assembly of Non-Photoresponsive Gold Nanoparticles

Herein, an interesting light-induced self-assembly behavior from non-photoresponsive gold nanoparticles (Au NPs) was reported. Specifically, a pH-responsive amphiphile SPBwas developed that contained a particular phenylboronic acid moiety and showed excellent surface activity at the neutral and basic conditions, thereby stabilizing Au NPs well. Accordingly, the SPB-functionalized Au NPs showed strong pH dependence that there presented the pH-induced reversible self-assembly behavior. Furthermore, the introduction of a small amount of commercially available photoacid generator named diphenyliodonium nitrate (DIN) into the system could endow it with apparent light-switchable self-assembly behavior. The pH- and light-induced self-assembly behaviors of SPB-functionalized Au NPs in the absence and presence of DIN, respectively, were systematically studied by various techniques including UV-vis spectrum, transmission electron microscope, nuclear magnetic resonance, and Fourier transform infrared spectroscopy, which evidently confirmed that the stimuli-responsive self-assembly was controlled by the hydrogen-bonding interactions between phenylboronic acid moieties. Attributing to the light-induced obvious color change from bright-red to deep purple, the system was applied in particle imprinting successfully.

Fluorescence Quenching of CdTe Quantum Dots with Co (III) Complexes via Electrostatic Assembly Formation

The photoluminescence quenching of CdTe QDs in the presence of three different Co (III)-complexes is studied to elucidate the role of interactions between functional groups of positively charged cysteamine capped CdTe QDs and negatively charged Co (III) complexes bearing carboxylic groups. The steady state and time resolved spectroscopy has been used to investigate the mechanism of quenching. After detailed analysis, it is concluded that quenching is contributed by both static as well as dynamic processes. The static contribution has been assigned to the electrostatic assembly formation via ionic interactions between the amine functional groups of positively charged cysteamine capped CdTe QDs and carboxylic acid groups of negatively charged complexes. The electrostatic interactions were confirmed by zeta potential measurement as well as from effect of salt addition. These studies have implications in designing donor/acceptor pairs having complementary functional groups for efficient optoelectronic devices or photocatalytic systems.

Non-classical hydrogen bond triggered strand displacement for analytical applications and DNA nanostructure assembly

A novel strand displacement triggered by the non-classical hydrogen bond between cyanuric acid and adenine exhibits a fast reaction rate.

Nanoparticle Superlattices: The Roles of Soft Ligands

Nanoparticle superlattices are periodic arrays of nanoscale inorganic building blocks including metal nanoparticles, quantum dots and magnetic nanoparticles. Such assemblies can exhibit exciting new collective properties different from those of individual nanoparticle or corresponding bulk materials. However, fabrication of nanoparticle superlattices is nontrivial because nanoparticles are notoriously difficult to manipulate due to complex nanoscale forces among them. An effective way to manipulate these nanoscale forces is to use soft ligands, which can prevent nanoparticles from disordered aggregation, fine-tune the interparticle potential as well as program lattice structures and interparticle distances - the two key parameters governing superlattice properties. This article aims to review the up-to-date advances of superlattices from the viewpoint of soft ligands. We first describe the theories and design principles of soft-ligand-based approach and then thoroughly cover experimental techniques developed from soft ligands such as molecules, polymer and DNA. Finally, we discuss the remaining challenges and future perspectives in nanoparticle superlattices.

Determination of the local density of polydisperse nanoparticle assemblies

Quantitative characterization of the average structure of dense nanoparticle assemblies and aggregates is a common problem in nanoscience. Small-angle scattering is a suitable technique, but it is usually limited to not too big assemblies due to the limited experimental range, low concentrations to avoid interactions, and monodispersity to keep calculations tractable. In the present paper, a straightforward analysis of the generally available scattered intensity - even for large assemblies, at high concentrations - is detailed, providing information on the local volume fraction of polydisperse particles with hard sphere interactions. It is based on the identical local structure of infinite homogeneous nanoparticle assemblies and their subsets forming finite-sized clusters. This approach is extended to polydispersity, using Monte-Carlo simulations of hard and moderately sticky hard spheres. As a result, a simple relationship between the observed structure factor minimum - termed the correlation hole - and the average local volume fraction κ on the scale of neighboring particles is proposed and validated through independent aggregate simulations. This relationship shall be useful as an efficient tool for the structural analysis of arbitrarily aggregated colloidal systems.

Programmed Self-Assembly of Branched Nanocrystals with an Amphiphilic Surface Pattern

Site-selective surface modification on the shape-controlled nanocrystals is a key approach in the programmed self-assembly of inorganic colloidal materials. This study demonstrates a simple methodology to gain self-assemblies of semiconductor nanocrystals with branched shapes through tip-to-tip attachment. Short-chained water-soluble cationic thiols are employed as a surface ligand for CdSe tetrapods and CdSe/CdS core/shell octapods. Because of the less affinity of arm-tip to the surface ligands compared to the arm-side wall, the tip-surface becomes uncapped to give a hydrophobic nature, affording an amphiphilic surface pattern. The amphiphilic tetrapods aggregated into porous agglomerates through tip-to-tip connection in water, while they afforded a hexagonally arranged Kagome-like two-dimensional (2D) assembly by the simple casting of aqueous dispersion with the aid of a convective self-assembly mechanism. A 2D net-like assembly was similarly obtained from amphiphilic octapods. A dissipative particle dynamics simulation using a planar tripod model with an amphiphilic surface pattern reproduced the formation of the Kagome-like assembly in a 2D confined space, demonstrating that the lateral diffusion of nanoparticles and the firm contacts between the hydrophobic tips play crucial roles in the self-assembly.

A turn-on FRET sensor based on dichlorofluorescein and AuNPs for rapid and ultrasensitive detection of ambroxol hydrochloride in urine

Schematic illustration for the detection of ambroxol based on FRET between the AuNPs and DCF.

Gold Aerogels: Three-Dimensional Assembly of Nanoparticles and Their Use as Electrocatalytic Interfaces

Three-dimensional (3D) porous metal nanostructures have been a long sought-after class of materials due to their collective properties and widespread applications. In this study, we report on a facile and versatile strategy for the formation of Au hydrogel networks involving the dopamine-induced 3D assembly of Au nanoparticles. Following supercritical drying, the resulting Au aerogels exhibit high surface areas and porosity. They are all composed of porous nanowire networks reflecting in their diameters those of the original particles (5-6 nm) via electron microscopy. Furthermore, electrocatalytic tests were carried out in the oxidation of some small molecules with Au aerogels tailored by different functional groups. The beta-cyclodextrin-modified Au aerogel, with a host-guest effect, represents a unique class of porous metal materials of considerable interest and promising applications for electrocatalysis.