Dynamics and Energy Contributions for Transport of Unfolded Pertactin through a Protein Nanopore

Identification of Oligosaccharide Isomers Using Electrostatically Asymmetric OmpF Nanopore

Glycans, unlike uniformly charged DNA and compositionally diverse peptides, are typically uncharged and possess rich stereoisomeric diversity in the glycosidic bonds between two monosaccharide units. These unique features, including charge heterogeneity and structural complexity, pose significant challenges for accurate analysis. Herein, we developed a novel single-molecule oligosaccharide sensor, OmpF nanopore. The natural electroosmotic flow within OmpF generates a robust driving force for unlabeled neutral oligosaccharides, enabling detection at a concentration as low as 6.4 μM. Furthermore, the asymmetric constriction zone of OmpF was employed to construct a stereoselective recognition site, enabling sensitive identification of glycosidic bond differences in cell lysate samples. With the assistance of machine learning algorithms, the OmpF nanopore achieved a recognition accuracy of 99.9 % for tetrasaccharides differing in only one glycosidic bond was achieved. This nanopore sensor provides a highly sensitive analytical tool with a broad dynamic range. It enables chiral recognition of oligosaccharides at low concentrations and is suitable for analysing both low-abundance and practical samples.

Aerolysin Nanopore Electrochemistry

ConspectusIons are the crucial signaling components for living organisms. In cells, their transportation across pore-forming membrane proteins is vital for regulating physiological functions, such as generating ionic current signals in response to target molecule recognition. This ion transport is affected by confined interactions and local environments within the protein pore. Therefore, the pore-forming protein can efficiently transduce the characteristics of each target molecule into ion-transport-mediated signals with high sensitivity. Inspired by nature, various protein pores have been developed into high-throughput and label-free nanopore sensors for single-molecule detection, enabling rapid and accurate readouts. In particular, aerolysin, a key virulence factor of Aeromonas hydrophila, exhibits a high sensitivity in generating ionic current fingerprints for detecting subtle differences in the sequence, conformation, and structure of DNA, proteins, polypeptides, oligosaccharides, and other molecules. Aerolysin features a cap that is approximately 14 nm wide on the cis side and a central pore that is about 10 nm long with a minimum diameter of around 1 nm. Its long lumen, with 11 charged rings at two entrances and neutral amino acids in between, facilitates the dwelling of the single analyte within the pore. This characteristic enables rich interactions between the well-defined residues within the pore and the analyte. As a result, the ionic current signal offers a unique molecular fingerprint, extending beyond the traditional volume exclusion model in nanopore sensing. In 2006, aerolysin was first reported to discriminate conformational differences of single peptides, opening the door for a rapidly growing field of aerolysin nanopore electrochemistry. Over the years, various mutant aerolysin nanopores have emerged, associated with advanced instrumentation and data analysis algorithms, enabling the simultaneous identification of over 30 targets with the number still increasing. Aerolysin nanopore electrochemistry in particular allows time-resolved qualitative and quantitative analysis ranging from DNA sequencing, proteomics, enzyme kinetics, and single-molecule reactions to potential clinical diagnostics. Especially, the feasibility of aerolysin nanopore electrochemistry in dynamic quantitative analysis would revolutionize omics studies at the single-molecule level, paving the way for the promising field of single-molecule temporal omics. Despite the success of this approach so far, it remains challenging to understand how confined interactions correlate to the distinguishable ionic signatures. Recent attempts have added correction terms to the volume exclusion model to account for variations in ion mobility within the nanopore caused by the confined interactions between the aerolysin and the analyte. Therefore, in this Account, we revisit the origin of the current blockade induced by target molecules inside the aerolysin nanopore. We highlight the contributions of the confined noncovalent interactions to the sensing ability of the aerolysin nanopore through the corrected conductance model. This Account then describes the design of interaction networks within the aerolysin nanopore, including electrostatic, hydrophobic, hydrogen-bonding, cation-π, and ion-charged amino acid interactions, for ultrasensitive biomolecular identification and quantification. Finally, we provide an outlook on further understanding the noncovalent interaction network inside the aerolysin nanopore, improving the manipulating and fine-tuning of confined electrochemistry toward a broad range of practical applications.

Controlled Translocation of Proteins through a Biological Nanopore for Single-Protein Fingerprint Identification

After the successful sequencing of nucleic acids, nanopore technology has now been applied to proteins. Recently, it has been demonstrated that an electro-osmotic flow can be used to induce the transport of unraveled polypeptides across nanopores. Polypeptide translocation, however, is too fast for accurate reading its amino acid compositions. Here, we show that the introduction of hydrophobic residues into the lumen of the nanopore reduces the protein translocation speed. Importantly, the introduction of a tyrosine at the entry of the nanopore and an isoleucine at the entry of the β-barrel of the nanopore reduced the speed of translocation to ∼10 amino acids/millisecond while keeping a relatively large ionic current, a crucial component for protein identification. These nanopores showed unique features within their current signatures, which may pave the way toward protein fingerprinting using nanopores.

Blobs form during the single-file transport of proteins across nanopores

The transport of biopolymers across nanopores is an important biological process currently under investigation for the rapid analysis of DNA and proteins. While the transport of DNA is generally understood, methods to induce unfolded protein translocation have only recently been discovered (Yu et al., 2023, Sauciuc et al., 2023). Here, we found that during electroosmotically driven translocation of polypeptides, blob-like structures typically form inside nanopores, often obstructing their transport and preventing addressing individual amino acids. This is in contrast with the electrophoretic transport of DNA, where the formation of such structures has not been reported. Comparisons between different nanopore sizes and shapes and modifications by different surface chemistries allowed formulating a mechanism for blob formation. We also show that single-file transport can be achieved by using 1) nanopores that have an entry and an internal diameter smaller than the persistence length of the polymer, 2) nanopores with a nonsticky (i.e., nonaromatic) inner surface, and 3) moderate translocation velocities. These experiments provide a basis for understanding polypeptide transport under confinement and for improving the design and engineering of nanopores for protein analysis.

Identification and Detection of a Peptide Biomarker and Its Enantiomer by Nanopore

Until now, no fast, low-cost, and direct technique exists to identify and detect protein/peptide enantiomers, because their mass and charge are identical. They are essential since l- and d-protein enantiomers have different biological activities due to their unique conformations. Enantiomers have potential for diagnostic purposes for several diseases or normal bodily functions but have yet to be utilized. This work uses an aerolysin nanopore and electrical detection to identify vasopressin enantiomers, l-AVP and d-AVP, associated with different biological processes and pathologies. We show their identification according to their conformations, in either native or reducing conditions, using their specific electrical signature. To improve their identification, we used a principal component analysis approach to define the most relevant electrical parameters for their identification. Finally, we used the Monte Carlo prediction to assign each event type to a specific l- or d-AVP enantiomer.

Unravelled proteins form blobs during translocation across nanopores

The electroosmotic-driven transport of unravelled proteins across nanopores is an important biological process that is now under investigation for the rapid analysis and sequencing of proteins. For this approach to work, however, it is crucial that the polymer is threaded in single file. Here we found that, contrary to the electrophoretic transport of charged polymers such as DNA, during polypeptide translocation blob-like structures typically form inside nanopores. Comparisons between different nanopore sizes, shapes and surface chemistries showed that under electroosmotic-dominated regimes single-file transport of polypeptides can be achieved using nanopores that simultaneously have an entry and an internal diameter that is smaller than the persistence length of the polymer, have a uniform non-sticky ( i . e . non-aromatic) nanopore inner surface, and using moderate translocation velocities.

Identification of Conformational Variants for Bradykinin Biomarker Peptides from a Biofluid Using a Nanopore and Machine Learning

There is a current need to develop methods for the sensitive detection of peptide biomarkers in complex mixtures of molecules, such as biofluids, to enable early disease detection. Moreover, to our knowledge, there is currently no detection method capable of identifying the different conformations of a peptide biomarker differing by a single amino acid. Single-molecule nanopore sensing promises to provide this level of resolution. In order to be able to identify these differences in a biofluid such as serum, it is necessary to carefully characterize electrical parameters to obtain specific signatures of each biomarker population observed. We are interested here in a family of peptide biomarkers, kinins such as bradykinin and des-Arg9 bradykinin, that are involved in many disabling pathologies (allergy, asthma, angioedema, sepsis, or cancer). We show the proof of concept for direct identification of these biomarkers in serum at the single-molecule level using a protein nanopore. Each peptide exhibits two unique electrical signatures attributed to specific conformations in bulk. The same signatures are found in serum, allowing their discrimination and identification in a complex mixture such as biofluid. To extend the utility of our experimental results, we developed a principal component analysis approach to define the most relevant electrical parameters for their identification. Finally, we used semisupervised classification to assign each event type to a specific biomarker at physiological serum concentration. In the future, single-molecule scale analysis of peptide biomarkers using a powerful nanopore coupled with machine learning will facilitate the identification and quantification of other clinically relevant biomarkers from biofluids.

Direct Determination of the Structure of Single Biopolymer Molecules Using Nanopore Sequencing

This review highlights operational principles, features, and modern aspects of the development of third-generation sequencing technology of biopolymers focusing on the nucleic acids analysis, namely the nanopore sequencing system. Basics of the method and technical solutions used for its realization are considered, from the first works showing the possibility of creation of these systems to the easy-to-handle procedure developed by Oxford Nanopore Technologies company. Moreover, this review focuses on applications, which were developed and realized using equipment developed by the Oxford Nanopore Technologies, including assembly of whole genomes, methagenomics, direct analysis of the presence of modified bases.

Nanopore Discrimination of Coagulation Biomarker Derivatives and Characterization of a Post-Translational Modification

One of the most important health challenges is the early and ongoing detection of disease for prevention, as well as personalized treatment management. Development of new sensitive analytical point-of-care tests are, therefore, necessary for direct biomarker detection from biofluids as critical tools to address the healthcare needs of an aging global population. Coagulation disorders associated with stroke, heart attack, or cancer are defined by an increased level of the fibrinopeptide A (FPA) biomarker, among others. This biomarker exists in more than one form: it can be post-translationally modified with a phosphate and also cleaved to form shorter peptides. Current assays are long and have difficulties in discriminating between these derivatives; hence, this is an underutilized biomarker for routine clinical practice. We use nanopore sensing to identify FPA, the phosphorylated FPA, and two derivatives. Each of these peptides is characterized by unique electrical signals for both dwell time and blockade level. We also show that the phosphorylated form of FPA can adopt two different conformations, each of which have different values for each electrical parameter. We were able to use these parameters to discriminate these peptides from a mix, thereby opening the way for the potential development of new point-of-care tests.

A Nanopore Sensor for Multiplexed Detection of Short Polynucleotides Based on Length-Variable, Poly-Arginine-Conjugated Peptide Nucleic Acids

Real-time and easy-to-use detection of nucleic acids is crucial for many applications, including medical diagnostics, genetic screening, forensic science, or monitoring the onset and progression of various diseases. Herein, an exploratory single-molecule approach for multiplexed discrimination among similar-sized single-stranded DNAs (ssDNA) is presented. The underlying strategy combined (i) a method based on length-variable, short arginine (poly-Arg) tags appended to peptide nucleic acid (PNA) probes, designed to hybridize with selected regions from complementary ssDNA targets (cDNA) in solution and (ii) formation and subsequent detection with the α-hemolysin nanopore of (poly-Arg)-PNA-cDNA duplexes containing two overhangs associated with the poly-Arg tail and the non-hybridized segment from ssDNA. We discovered that the length-variable poly-Arg tail marked distinctly the molecular processes associated with the nanopore-mediated duplexes capture, trapping and unzipping. This enabled the detection of ssDNA targets via the signatures of (poly-Arg)-PNA-cDNA blockade events, rendered most efficient from the β-barrel entrance of the nanopore, and scaled proportional in efficacy with a larger poly-Arg moiety. We illustrate the approach by sensing synthetic ssDNAs designed to emulate fragments from two regions of SARS-CoV-2 nucleocapsid phosphoprotein N-gene.

Biological nanopores for single-molecule sensing

Evolution has found countless ways to transport material across cells and cellular compartments separated by membranes. Protein assemblies are the cornerstone for the formation of channels and pores that enable this regulated passage of molecules in and out of cells, contributing to maintaining most of the fundamental processes that sustain living organisms. As in several other occasions, we have borrowed from the natural properties of these biological systems to push technology forward and have been able to hijack these nano-scale proteinaceous pores to learn about the physical and chemical features of molecules passing through them. Today, a large repertoire of biological pores is exploited as molecular sensors for characterizing biomolecules that are relevant for the advancement of life sciences and application to medicine. Although the technology has quickly matured to enable nucleic acid sensing with transformative implications for genomics, biological pores stand as some of the most promising candidates to drive the next developments in single-molecule proteomics.

A single-molecule insight into the ionic strength dependent, cationic peptide nucleic acids - oligonucleotides interactions

To alleviate solubility-related shortcomings associated with the use of neutral peptide nucleic acids (PNA), a powerful strategy is incorporate various charged sidechains onto the PNA structure. Here we employ a single-molecule technique and prove that the ionic current blockade signature of free poly(Arg)-PNAs and their corresponding duplexes with target ssDNAs interacting with a single a-hemolysin (a-HL) nanopore is highly ionic strength dependent, with high salt-containing electrolytes facilitating both capture and isolation of such complexes. Our data illustrate the effect of low ionic strength in reducing the effective volume of free poly(Arg)-PNAs and augmentation of their electrophoretic mobility while traversing the nanopore.  We found that unlike in high salt electrolytes, the specific hybridization of cationic moiety-containing PNAs with complementary negatively charged ssDNAs in a salt concentration as low as 0.5 M is dramatically impeded. We suggest a scenario in which reduced charge screening by counterions in low salt electrolytes enables non-specific, electrostatic interactions with the anionic backbone of polynucleotides, thus reducing the ability of PNA-DNA complementary association via hydrogen bonding patterns. We applied an experimental strategy with spatially-separated poly(Arg)-PNAs and ssDNAs, and present evidence at the single-molecule level suggestive of the real-time, long-range interactions-driven formation of poly(Arg)-PNA-DNA complexes, as individual strands entering the nanopore from opposite directions collide inside a nanocavity.

Herding cats: Label-based approaches in protein translocation through nanopore sensors for single-molecule protein sequence analysis

Proteins carry out life's essential functions. Comprehensive proteome analysis technologies are thus required for a full understanding of the operating principles of biological systems. While current proteomics techniques suffer from limitations in sensitivity and/or throughput, nanopore technology has the potential to enable de novo protein identification through single-molecule sequencing. However, a significant barrier to achieving this goal is controlling protein/peptide translocation through the nanopore sensor for processive strand analysis. Here, we review recent approaches that use a range of techniques, from oligonucleotide conjugation to molecular motors, aimed at driving protein strands and peptides through protein nanopores. We further discuss site-specific protein conjugation chemistry that could be combined with these translocation approaches as future directions to achieve single-molecule protein detection and sequencing of native proteins.

Recent advances in biological nanopores for nanopore sequencing, sensing and comparison of functional variations in MspA mutants

Biological nanopores are revolutionizing human health by the great myriad of detection and diagnostic skills. Their nano-confined area and ingenious shape are suitable to investigate a diverse range of molecules that were difficult to identify with the previous techniques. Additionally, high throughput and label-free detection of target analytes instigated the exploration of new bacterial channel proteins such as Fragaceatoxin C (FraC), Cytolysin A (ClyA), Ferric hydroxamate uptake component A (FhuA) and Curli specific gene G (CsgG) along with the former ones, like α-hemolysin (αHL), Mycobacterium smegmatis porin A (MspA), aerolysin, bacteriophage phi 29 and Outer membrane porin G (OmpG). Herein, we discuss some well-known biological nanopores but emphasize on MspA and compare the effects of site-directed mutagenesis on the detection ability of its mutants in view of the surface charge distribution, voltage threshold and pore-analyte interaction. We also discuss illustrious and latest advances in biological nanopores for past 2-3 years due to limited space. Last but not the least, we elucidate our perspective for selecting a biological nanopore and propose some future directions to design a customized nanopore that would be suitable for DNA sequencing and sensing of other nontrivial molecules in question.

Detection of single peptide with only one amino acid modification via electronic fingerprinting using reengineered durable channel of Phi29 DNA packaging motor

Protein post-translational modification (PTM) is crucial to modulate protein interactions and activity in various biological processes. Emerging evidence has revealed PTM patterns participate in the pathology onset and progression of various diseases. Current PTM identification relies mainly on mass spectrometry-based approaches that limit the assessment to the entire protein population in question. Here we report a label-free method for the detection of the single peptide with only one amino acid modification via electronic fingerprinting using reengineered durable channel of phi29 DNA packaging motor, which bears the deletion of 25-amino acids (AA) at the C-terminus or 17-AA at the internal loop of the channel. The mutant channels were used to detect propionylation modification via single-molecule fingerprinting in either the traditional patch-clamp or the portable MinION™ platform of Oxford Nanopore Technologies. Up to 2000 channels are available in the MinION™ Flow Cells. The current signatures and dwell time of individual channels were identified. Peptides with only one propionylation were differentiated. Excitingly, identification of single or multiple modifications on the MinION™ system was achieved. The successful application of PTM differentiation on the MinION™ system represents a significant advance towards developing a label-free and high-throughput detection platform utilizing nanopores for clinical diagnosis based on PTM.

Pore-forming toxins as tools for polymer analytics: From sizing to sequencing

We report here on the nanopore resistive pulse sensing (Np-RPS) method, involving pore-forming toxins as tools for polymer analytics at single molecule level. Np-RPS is an electrical method for the label-free detection of single molecules. A molecule interacting with the pore causes a change of the electrical resistance of the pore, called a resistive pulse, associated with a measurable transient current blockade. The features of the blockades, in particular their depth and duration, contain information on the molecular properties of the analyte. We first revisit the history of Np-RPS, then we discuss the effect of the configuration of the molecule/nanopore interaction on the molecular information that can be extracted from the signal, illustrated in two different regimes that either favor molecular sequencing or molecular sizing. Specifically, we focus on the sizing regime and on the use of two different pore-forming toxins, staphylococcal α-hemolysin (αHL) and aerolysin (AeL) nanopores, for the characterization of water-soluble polymers (poly-(ethylene glycol), (PEG)), homopeptides, and heteropeptides. We discuss how nanopore sizing of polymers could be envisioned as a new approach for peptide/protein sequencing.

Biological Nanopores: Engineering on Demand

Nanopore-based sensing is a powerful technique for the detection of diverse organic and inorganic molecules, long-read sequencing of nucleic acids, and single-molecule analyses of enzymatic reactions. Selected from natural sources, protein-based nanopores enable rapid, label-free detection of analytes. Furthermore, these proteins are easy to produce, form pores with defined sizes, and can be easily manipulated with standard molecular biology techniques. The range of possible analytes can be extended by using externally added adapter molecules. Here, we provide an overview of current nanopore applications with a focus on engineering strategies and solutions.

Nanopore detection of metal ions: Current status and future directions

In this review, we highlight recent research efforts that aimed at developing nanopore sensors for detection of metal ions, which play a crucial role in environmental safety and human health. Protein pores use three stochastic sensing-based strategies for metal ion detection. The first strategy is to construct engineered nanopores with metal ion binding sites, so that the interaction between the target analytes and the nanopore can slow the movement of metal ions in the nano-channel. Second, large molecules such as nucleic acids and especially peptides could be utilized as external selective molecular probes to detect metal ions based on the conformational change of the ligand molecules induced by the metal ion-ligand chelation / coordination interaction. Third, enzymatic reactions can also be used as an alternative to the molecule probe strategy in the situation that a sensitive and selective probe molecule for the target analyte is difficult to obtain. On the other hand, by taking advantage of steady-state analysis, synthetic nanopores mainly use two strategies (modification and modification-free) to detect metals. Given the advantages of high sensitivity & selectivity, and label-free detection, nanopore-based metal ion sensors should find useful application in many fields, including environmental monitoring, medical diagnosis, and so on.

Nanopore-Assisted, Sequence-Specific Detection, and Single-Molecule Hybridization Analysis of Short, Single-Stranded DNAs

We report here on the ability of the α-hemolysin (α-HL) nanopore to achieve label-free, selective, and real-time detection of 15 nt long ssDNA fragments in solution, by exploiting their hybridization with freely added, polycationic peptides-functionalized PNAs. At the core of our work lies the paradigm that when PNAs and ssDNA are mixed together, the bulk concentration of free PNA decreases, depending upon the (mis)match degree between complementary strands and their relative concentrations. We demonstrate that the ssDNA sensing principle and throughput of the method are determined by the rate at which nonhybridized, polycationic peptides-functionalized PNA molecules arrive at the α-HL's vestibule entrance and thread into the nanopore. We found that with the application of a 30-fold salt gradient across the nanopore, the method enhances single-molecule detection sensitivity in the nanomolar range of ssDNA concentrations. This study demonstrates that the transmembrane potential-dependent unzip of single PNA-DNA duplexes at the α-HL's β-barrel entry permits discrimination between sequences that differ by one base pair.

Aerolysin, a Powerful Protein Sensor for Fundamental Studies and Development of Upcoming Applications

The nanopore electrical approach is a breakthrough in single molecular level detection of particles as small as ions, and complex as biomolecules. This technique can be used for molecule analysis and characterization as well as for the understanding of confined medium dynamics in chemical or biological reactions. Altogether, the information obtained from these kinds of experiments will allow us to address challenges in a variety of biological fields. The sensing, design, and manufacture of nanopores is crucial to realize these objectives. For some time now, aerolysin, a pore forming toxin, and its mutants have shown high potential in real time analytical chemistry, size discrimination of neutral polymers, oligosaccharides, oligonucleotides and peptides at monomeric resolution, sequence identification, chemical modification on DNA, potential biomarkers detection, and protein folding analysis. This review focuses on the results obtained with aerolysin nanopores on the fields of chemistry, biology, physics, and biotechnology. We discuss and compare as well the results obtained with other protein channel sensors.

Thermostable virus portal proteins as reprogrammable adapters for solid-state nanopore sensors

Nanopore-based sensors are advancing the sensitivity and selectivity of single-molecule detection in molecular medicine and biotechnology. Current electrical sensing devices are based on either membrane protein pores supported in planar lipid bilayers or solid-state (SS) pores fabricated in thin metallic membranes. While both types of nanosensors have been used in a variety of applications, each has inherent disadvantages that limit its use. Hybrid nanopores, consisting of a protein pore supported within a SS membrane, combine the robust nature of SS membranes with the precise and simple engineering of protein nanopores. We demonstrate here a novel lipid-free hybrid nanopore comprising a natural DNA pore from a thermostable virus, electrokinetically inserted into a larger nanopore supported in a silicon nitride membrane. The hybrid pore is stable and easy to fabricate, and, most importantly, exhibits low peripheral leakage allowing sensing and discrimination among different types of biomolecules.

From current trace to the understanding of confined media

Nanopores constitute devices for the sensing of nano-objects such as ions, polymer chains, proteins or nanoparticles. We describe what information we can extract from the current trace. We consider the entrance of polydisperse chains into the nanopore, which leads to a conductance drop. We describe the detection of these current blockades according to their shape. Finally, we explain how data analysis can be used to enhance our understanding of physical processes in confined media.

The Utility of Nanopore Technology for Protein and Peptide Sensing

Resistive pulse nanopore sensing enables label-free single-molecule analysis of a wide range of analytes. An increasing number of studies have demonstrated the feasibility and usefulness of nanopore sensing for protein and peptide characterization. Nanopores offer the potential to study a variety of protein-related phenomena that includes unfolding kinetics, differences in unfolding pathways, protein structure stability, and free-energy profiles of DNA-protein and RNA-protein binding. In addition to providing a tool for fundamental protein characterization, nanopores have also been used as highly selective protein detectors in various solution mixtures and conditions. This review highlights these and other developments in the area of nanopore-based protein and peptide detection.

Single-Molecule Dynamics and Discrimination between Hydrophilic and Hydrophobic Amino Acids in Peptides, through Controllable, Stepwise Translocation across Nanopores

In this work, we demonstrate the proof-of-concept of real-time discrimination between patches of hydrophilic and hydrophobic monomers in the primary structure of custom-engineered, macro-dipole-like peptides, at uni-molecular level. We employed single-molecule recordings to examine the ionic current through the α-hemolysin (α-HL) nanopore, when serine or isoleucine residues, flanked by segments of oppositely charged arginine and glutamic amino acids functioning as a voltage-dependent “molecular brake” on the peptide, were driven at controllable rates across the nanopore. The observed differences in the ionic currents blockades through the nanopore, visible at time resolutions corresponding to peptide threading through the α-HL’s constriction region, was explained by a simple model of the volumes of electrolyte excluded by either amino acid species, as groups of serine or isoleucine monomers transiently occupy the α-HL. To provide insights into the conditions ensuring optimal throughput of peptide readout through the nanopore, we probed the sidedness-dependence of peptide association to and dissociation from the electrically and geometrically asymmetric α-HL.

The aerolysin nanopore: from peptidomic to genomic applications

The aerolysin pore (ARP) is a newly emerging nanopore that has been extensively used for peptide and protein sensing. Recently, several groups have explored the application of ARP in detecting genetic and epigenetic markers. This brief review summarizes the current applications of ARP, progressing from peptidomic to genomic detection; the recently reported site-directed mutagenesis of ARP; and new genomic DNA sensing approaches, and their advantages and disadvantages. This review will also discuss the perspectives and future applications of ARP for nucleic acid sequencing and biomolecule sensing.

Nano-channel of viral DNA packaging motor as single pore to differentiate peptides with single amino acid difference

Detection, differentiation, mapping, and sequencing of proteins are important in proteomics for the assessment of cell development such as protein methylation or phosphorylation as well as the diagnosis of diseases including metabolic disorder, mental illness, immunological ailments, and malignant cancers. Nanopore technology has demonstrated the potential for the sequencing or sensing of DNA, RNA, chemicals, or other macromolecules. Due to the diversity of protein in shape, structure and charge and the composition versatility of 20 amino acids, the sequencing of proteins remains challenging. Herein, we report the application of the channel of bacteriophage T7 DNA packaging motor for the differentiation of an assortment of peptides of a single amino acid difference. Explicit fingerprints or signatures were obtained based on current blockage and dwell time of individual peptide. Data from the clear mapping of small proteins after protease digestion suggests the potential of using T7 motor channel for proteomics including protein sequencing.

Single-File Protein Translocations through Graphene-MoS2 Heterostructure Nanopores

Successfully threading unfolded protein molecules through nanopores whose sizes are comparable to that of an amino acid is a prerequisite for the nanopore-based protein sequencing method that promises to be high-throughput and low-cost. While the electric driving method can be effective for a homogeneously charged DNA molecule, it fails to drive an unfolded protein through a nanopore because the net charge of a protein fragment inside of the pore (where the electric field exists) can be positive, negative, or neutral. Here we propose and demonstrate by molecular dynamics simulations protein transport through a nanopore in a quasi-two-dimensional heterostructure stacked together by graphene and molybdenum disulfide (MoS₂) nanosheets. Thanks to different van der Waals interactions ( U) between a protein molecule and different 2D surfaces, it is energetically favorable for protein to progressively move from the MoS₂ surface to the graphene surface (more negative U) through a nanopore in the heterostructure.

Dynamics of a polyelectrolyte through aerolysin channel as a function of applied voltage and concentration⋆

We describe the behaviour of a polyelectrolyte in confined geometry. The transport of a polyelectrolyte, dextran sulfate, through a recombinant protein channel, aerolysin, inserted into a planar lipid bilayer is studied as a function of applied voltage and polyelectrolyte concentration and chain length. The aerolysin pore has a weak geometry asymmetry, a high number of charged residues and the polyelectrolyte is strongly negatively charged. The resulting current blockades were characterized by short and long dwelling times. Their frequency varies exponentially as a function of applied voltage and linearly as a function of polyelectrolyte concentration. The long blockade duration decreases exponentially when the electrical force increases. The ratio of the population of short events to the one of long events decreases when the applied voltage increases and displays an exponential variation. The long residence time increases with the polyelectrolyte chain length. We measure a reduction of the effective charge of the polyelectrolyte at the pore entry and inside the channel. For a fixed applied voltage, + / - 100 mV, at both sides of the protein pore entrance, the events frequency is similar as a function of dextran sulfate concentration. The mean blockade durations are independent of polyelectrolyte concentration and are similar for both entrances of the pore and remain constant as a function of the electrical force.

Rationally Designed Sensing Selectivity and Sensitivity of an Aerolysin Nanopore via Site-Directed Mutagenesis

Selectivity and sensitivity are two key parameters utilized to describe the performance of a sensor. In order to investigate selectivity and sensitivity of the aerolysin nanosensor, we manipulated its surface charge at different locations via single site-directed mutagenesis. To study the selectivity, we replaced the positively charged R220 at the entrance of the pore with negatively charged glutamic acid, resulting in barely no current blockages for sensing negatively charged oligonucleotides. For the sensitivity, we substituted the positively charged lumen-exposed amino acid K238 located at trans-ward third of the β-barrel stem with glutamic acid. This leads to a surprisingly longer duration time at +140 mV, which is about 20 times slower in translocation speed for Poly(dA)₄ compared to that of wild-type aerolysin, indicating the stronger pore-analyte interactions and enhanced sensitivity. Therefore, it is both feasible and understandable to rationally design confined biological nanosensors for single molecule detection with high selectivity and sensitivity.

Porphyrin-Assisted Docking of a Thermophage Portal Protein into Lipid Bilayers: Nanopore Engineering and Characterization

Nanopore-based sensors for nucleic acid sequencing and single-molecule detection typically employ pore-forming membrane proteins with hydrophobic external surfaces, suitable for insertion into a lipid bilayer. In contrast, hydrophilic pore-containing molecules, such as DNA origami, have been shown to require chemical modification to favor insertion into a lipid environment. In this work, we describe a strategy for inserting polar proteins with an inner pore into lipid membranes, focusing here on a circular 12-subunit assembly of the thermophage G20c portal protein. X-ray crystallography, electron microscopy, molecular dynamics, and thermal/chaotrope denaturation experiments all find the G20c portal protein to have a highly stable structure, favorable for nanopore sensing applications. Porphyrin conjugation to a cysteine mutant in the protein facilitates the protein's insertion into lipid bilayers, allowing us to probe ion transport through the pore. Finally, we probed the portal interior size and shape using a series of cyclodextrins of varying sizes, revealing asymmetric transport that possibly originates from the portal's DNA-ratchet function.

Remote Activation of a Nanopore for High-Performance Genetic Detection Using a pH Taxis-Mimicking Mechanism

Aerolysin protein pore has been widely used for sensing peptides and proteins. However, only a few groups explored this nanopore for nucleic acids detection. The challenge is the extremely low capture efficiency for nucleic acids (>10 bases), which severely lowers the sensitivity of an aerolysin-based genetic biosensor. Here we reported a simple and easy-to-operate approach to noncovalently transform aerolysin into a highly nucleic acids-sensitive nanopore. Through a remote pH-modulation mechanism, we simply lower the pH on one side of the pore, then aerolysin is immediately "activated" and enabled to capture target DNA/RNA efficiently from the opposite side of the pore. This mechanism also decelerates DNA translocation, a desired property for sequencing and gene detection, allowing temporal separation of DNAs in different lengths. This method provides insight into the nanopore engineering for biosensing, making aerolysin applicable in genetic and epigenetic detections of long nucleic acids.

Hydrogen Peroxide Sensing Based on Inner Surfaces Modification of Solid-State Nanopore

There are many techniques for the detection of molecules. But detection of molecules through solid-state nanopore in a solution is one of the promising, high-throughput, and low-cost technology used these days. In the present investigation, a solid-state nanopore platform was fabricated for the detection of hydrogen peroxide (H₂O₂), which is not only a label free product but also a significant participant in the redox reaction. We have successfully fabricated silicon nitride (Si₃N₄) nanopores with diameters of ~50 nm by using a focused Ga ion beam, the inner surface of the nanopore has been modified with horseradish peroxidase (HRP) by employing carbodiimide coupling chemistry. The immobilized HRP enzymes have ability to induce redox reactions in a single nanopore channel. Moreover, a real-time single aggregated ABTS^•+ molecular translocation events were monitored and investigated. The designed solid-state nanopore biosensor is reversible and can be applied to detect H₂O₂ multiple times.

Nanoscale Investigation of Generation 1 PAMAM Dendrimers Interaction with a Protein Nanopore

Herein, we describe at uni-molecular level the interactions between poly(amidoamine) (PAMAM) dendrimers of generation 1 and the α-hemolysin protein nanopore, at acidic and neutral pH, and ionic strengths of 0.5 M and 1 M KCl, via single-molecule electrical recordings. The results indicate that kinetics of dendrimer-α-hemolysin reversible interactions is faster at neutral as compared to acidic pH, and we propose as a putative explanation the fine interplay among conformational and rigidity changes on the dendrimer structure, and the ionization state of the dendrimer and the α-hemolysin. From the analysis of the dendrimer's residence time inside the nanopore, we posit that the pH- and salt-dependent, long-range electrostatic interactions experienced by the dendrimer inside the ion-selective α-hemolysin, induce a non-Stokesian diffusive behavior of the analyte inside the nanopore. We also show that the ability of dendrimer molecules to adapt their structure to nanoscopic spaces, and control the flow of matter through the α-hemolysin nanopore, depends non-trivially on the pH- and salt-induced conformational changes of the dendrimer.

Label-Free and Real-Time Detection of Protein Ubiquitination with a Biological Nanopore

The covalent addition of ubiquitin to target proteins is a key post-translational modification that is linked to a myriad of biological processes. Here, we report a fast, single-molecule, and label-free method to probe the ubiquitination of proteins employing an engineered Cytolysin A (ClyA) nanopore. We show that ionic currents can be used to recognize mono- and polyubiquitinated forms of native proteins under physiological conditions. Using defined conjugates, we also show that isomeric monoubiquitinated proteins can be discriminated. The nanopore approach allows following the ubiquitination reaction in real time, which will accelerate the understanding of fundamental mechanisms linked to protein ubiquitination.

Characterization of DNA duplex unzipping through a sub-2 nm solid-state nanopore

The unzipping and translocation of DNA duplexes through a sub-2 nm SiN_x solid-state nanopore have been demonstrated by well-resolved three-level blockades.

Probing driving forces in aerolysin and α-hemolysin biological nanopores: electrophoresis versus electroosmosis

The transport of macromolecules through nanopores is involved in many biological functions and is today at the basis of promising technological applications. Nevertheless the interpretation of the dynamics of the macromolecule/nanopore interaction is still misunderstood and under debate. At the nanoscale, inside biomimetic channels under an external applied voltage, electrophoresis, which is the electric force acting on electrically charged molecules, and electroosmotic flow (EOF), which is the fluid transport associated with ions, contribute to the direction and magnitude of the molecular transport. In order to decipher the contribution of the electrophoresis and electroosmotic flow, we explored the interaction of small, rigid, neutral molecules (cyclodextrins) and flexible, non-ionic polymers (poly(ethylene glycol), PEG) that can coordinate cations under appropriate experimental conditions, with two biological nanopores: aerolysin (AeL) and α-hemolysin (aHL). We performed experiments using two electrolytes with different ionic hydration (KCl and LiCl). Regardless of the nature of the nanopore and of the electrolyte, cyclodextrins behaved as neutral analytes. The dominant driving force was attributed to EOF, acting in the direction of the anion flow and stronger in LiCl than in KCl. The same qualitative behaviour was observed for PEGs in LiCl. In contrast, in KCl, PEGs behaved as positively charged polyelectrolytes through both AeL and aHL. Our results are in agreement with theoretical predictions about the injection of polymers inside a confined geometry (ESI). We believe our results to be of significant importance for better control of the dynamics of analytes of different nature through biological nanopores.

Fingerprinting of Peptides with a Large Channel of Bacteriophage Phi29 DNA Packaging Motor

Nanopore technology has become a highly sensitive and powerful tool for single molecule sensing of chemicals and biopolymers. Protein pores have the advantages of size amenability, channel homogeneity, and fabrication reproducibility. But most well-studied protein pores for sensing are too small for passage of peptide analytes that are typically a few nanometers in dimension. The funnel-shaped channel of bacteriophage phi29 DNA packaging motor has previously been inserted into a lipid membrane to serve as a larger pore with a narrowest N-terminal constriction of 3.6 nm and a wider C-terminal end of 6 nm. Here, the utility of phi29 motor channel for fingerprinting of various peptides using single molecule electrophysiological assays is reported. The translocation of peptides is proved unequivocally by single molecule fluorescence imaging. Current blockage percentage and distinctive current signatures are used to distinguish peptides with high confidence. Each peptide generated one or two distinct current blockage peaks, serving as typical fingerprint for each peptide. The oligomeric states of peptides can also be studied in real time at single molecule level. The results demonstrate the potential for further development of phi29 motor channel for detection of disease-associated peptide biomarkers.

Discrimination of oligonucleotides of different lengths with a wild-type aerolysin nanopore

Protein nanopores offer an inexpensive, label-free method of analysing single oligonucleotides. The sensitivity of the approach is largely determined by the characteristics of the pore-forming protein employed, and typically relies on nanopores that have been chemically modified or incorporate molecular motors. Effective, high-resolution discrimination of oligonucleotides using wild-type biological nanopores remains difficult to achieve. Here, we show that a wild-type aerolysin nanopore can resolve individual short oligonucleotides that are 2 to 10 bases long. The sensing capabilities are attributed to the geometry of aerolysin and the electrostatic interactions between the nanopore and the oligonucleotides. We also show that the wild-type aerolysin nanopores can distinguish individual oligonucleotides from mixtures and can monitor the stepwise cleavage of oligonucleotides by exonuclease I.

Electroosmotic Trap Against the Electrophoretic Force Near a Protein Nanopore Reveals Peptide Dynamics During Capture and Translocation

We report on the ability to control the dynamics of a single peptide capture and passage across a voltage-biased, α-hemolysin nanopore (α-HL), under conditions that the electroosmotic force exerted on the analyte dominates the electrophoretic transport. We demonstrate that by extending outside the nanopore, the electroosmotic force is able to capture a peptide at either the lumen or vestibule entry of the nanopore, and transiently traps it inside the nanopore, against the electrophoretic force. Statistical analysis of the resolvable dwell-times of a metastable trapped peptide, as it occupies either the β-barrel or vestibule domain of the α-HL nanopore, reveals rich kinetic details regarding the direction and rates of stochastic movement of a peptide inside the nanopore. The presented approach demonstrates the ability to shuttle and study molecules along the passage pathway inside the nanopore, allows to identify the mesoscopic trajectory of a peptide exiting the nanopore through either the vestibule or β-barrel moiety, thus providing convincing proof of a molecule translocating the pore. The kinetic analysis of a peptide fluctuating between various microstates inside the nanopore, enabled a detailed picture of the free energy description of its interaction with the α-HL nanopore. When studied at the limit of vanishingly low transmembrane potentials, this provided a thermodynamic description of peptide reversible binding to and within the α-HL nanopore, under equilibrium conditions devoid of electric and electroosmotic contributions.

Detection of a single enzyme molecule based on a solid-state nanopore sensor

The nanopore sensor as a high-throughput and low-cost technology can detect a single molecule in a solution. In the present study, relatively large silicon nitride (Si3N4) nanopores with diameters of ∼28 and ∼88 nm were fabricated successfully using a focused Ga ion beam. We have used solid-state nanopores with various sizes to detect the single horseradish peroxidase (HRP) molecule and for the first time analyzed single HRP molecular translocation events. In addition, a real-time monitored single enzyme molecular biochemical reaction and a translocation of the product of enzyme catalysis substrates were investigated by using a Si3N4 nanopore. Our nanopore system showed a high sensitivity in detecting single enzyme molecules and a real-time monitored single enzyme molecular biochemical reaction. This method could also be significant for studying gene expression or enzyme dynamics at the single-molecule level.