Selective and Regenerative Carbon Dioxide Capture by Highly Polarizing Porous Carbon Nitride

Enhanced Adsorption of Cadmium by a Covalent Organic Framework-Modified Biochar in Aqueous Solution

In the environmental field, the advancement of new high-efficiency heavy metal adsorption materials remains a continuous research focus. A novel composite, covalent organic framework-modified biochar (RH-COF), was fabricated via an in-situ polymerization approach in this study. The COF-modified biochar was characterized by elemental analysis, BET analysis, SEM, FT-IR, and XPS. The nitrogen and oxygen content in the modified material increased significantly from 0.96% and 15.50% to 5.40% and 24.08%, respectively, indicating the addition of a substantial number of nitrogen- and oxygen-containing functional groups to the RH-COF surface, thereby enhancing its adsorption capacity for Cd from 4.20 mg g-1 to 58.62 mg g-1, representing an approximately fourteen-fold increase. Both the pseudo-second-order model and the Langmuir model were suitable for describing the kinetics and isotherms of Cd2+ adsorption onto RH-COF. The adsorption performance of Cd2+ by RH-COF showed minimal sensitivity to pH values between 4.0 and 8.0, but could be slightly influenced by ionic strength. Mechanistic analysis showed that the Cd2+ adsorption on RH-COF was dominated by surface complexation and chelation, alongside electrostatic adsorption, surface precipitation, and Cπ-cation interactions. Overall, these findings suggest that the synthesis of COF-biochar composite may serve as a promising remediation strategy while providing scientific support for applying COF in environmental materials.

Leveraging experimental and computational tools for advancing carbon capture adsorbents research

CO2 emissions have been steadily increasing and have been a major contributor for climate change compelling nations to take decisive action fast. The average global temperature could reach 1.5 °C by 2035 which could cause a significant impact on the environment, if the emissions are left unchecked. Several strategies have been explored of which carbon capture is considered the most suitable for faster deployment. Among different carbon capture solutions, adsorption is considered both practical and sustainable for scale-up. But the development of adsorbents that can exhibit satisfactory performance is typically done through the experimental approach. This hit and trial method is costly and time consuming and often success is not guaranteed. Machine learning (ML) and other computational tools offer an alternate to this approach and is accessible to everyone. Often, the research towards materials focuses on maximizing its performance under simulated conditions. The aim of this study is to present a holistic view on progress in material research for carbon capture and the various tools available in this regard. Thus, in this review, we first present a context on the workflow for carbon capture material development before providing various machine learning and computational tools available to support researchers at each stage of the process. The most popular application of ML models is for predicting material performance and recommends that ML approaches can be utilized wherever possible so that experimentations can be focused on the later stages of the research and development.

Comparative study of photocatalysis with bulk and nanosheet graphitic carbon nitrides enhanced with silver

The main goal of this research is to investigate the effectiveness of graphitic carbon nitride (g-C3N4, g-CN) in both bulk and nanosheet forms, which have been surface-modified with silver nanoparticles (Ag NPs), as photocatalysts for the degradation of acid orange 7 (AO7), a model dye. The photodegradation of AO7 dye molecules in water was used to test the potential photocatalytic properties of these powder materials under two different lamps with wavelengths of 368 nm (UV light) and 420 nm (VIS light). To produce Ag NPs (Ag content 0.5, 1.5, and 3 wt%) on the g-CN materials, a new synthesis route based on a wet and low-temperature method was proposed, eliminating the need for reducing agents. The photodegradation activity of the samples increased with increasing silver content, with the best photocatalytic performances achieved for bulk g-CN samples and nanosheet silver-modified samples (with the highest content of 3 wt% Ag) under UV light, i.e., more than 75% and 78%, respectively. The VIS-induced photocatalytic activity of both examined series was higher than that of UV. The highest activities of 92% and 98% were achieved for the 1.5% Ag-modified g-CN bulk and nanosheet materials. This research presents an innovative, affordable, and environmentally friendly chemical approach to synthesizing photocatalysts that can be used for degrading organic pollutants in wastewater treatment.

Natural Products Derived Porous Carbons for CO2 Capture

As it is now established that global warming and climate change are a reality, international investments are pouring in and rightfully so for climate change mitigation. Carbon capture and separation (CCS) is therefore gaining paramount importance as it is considered one of the powerful solutions for global warming. Sorption on porous materials is a promising alternative to traditional carbon dioxide (CO2 ) capture technologies. Owing to their sustainable availability, economic viability, and important recyclability, natural products-derived porous carbons have emerged as favorable and competitive materials for CO2 sorption. Furthermore, the fabrication of high-quality value-added functional porous carbon-based materials using renewable precursors and waste materials is an environmentally friendly approach. This review provides crucial insights and analyses to enhance the understanding of the application of porous carbons in CO2 capture. Various methods for the synthesis of porous carbon, their structural characterization, and parameters that influence their sorption properties are discussed. The review also delves into the utilization of molecular dynamics (MD), Monte Carlo (MC), density functional theory (DFT), and machine learning techniques for simulating adsorption and validating experimental results. Lastly, the review provides future outlook and research directions for progressing the use of natural products-derived porous carbons for CO2 capture.

Mesoporous carbon nitride supported MgO for enhanced CO2 capture

The growing concern about the environmental consequences of anthropogenic CO2 emissions significantly stimulated the research of low-cost, efficient, and recyclable solid adsorbents for CO2 capture. In this work, a series of MgO-supported mesoporous carbon nitride adsorbents with different MgO contents (xMgO/MCN) was prepared using a facile process. The obtained materials were tested for CO2 capture from 10 vol% CO2 mixture gas with N2 using a fixed bed adsorber at atmospheric pressure. At 25 ºC, the bare MCN support and unsupported MgO samples demonstrated CO2 capture capacities of 0.99, and 0.74 mmol g-1, respectively, which were lower than those of the xMgO/MCN composites.The incorporation of MgO into the MCN improved the CO2 uptake, and the 20MgO/MCN exhibited the highest CO2 capture capacity of 1.15 mmol g-1 at 25 °C. The improved performance of the 20MgO/MCN nanohybrid can be possibly assigned to the presence of high content of highly dispersed MgO NPs along with its improved textural properties in terms of high specific surface area (215 m2g-1), large pore volume (0.22 cm3g-1), and abundant mesoporous structure. The efffects of temperature and CO2 flow rate were also investigated on the CO2 capture performance of 20MgO/MCN. Temperature was found to have a negative influence on the CO2 capture capacity of the 20MgO/MCN, which decreased from 1.15 to 0.65 mmol g-1with temperature rise from 25 C to 150º C, due to the endothermicity of the process. Similarly, the capture capacity decreased from 1.15 to 0.54 mmol g-1 with the increase of the flow rate from 50 to 200 ml minute-1 respectively. Importantly, 20MgO/MCN showed excellent reusability with consistent CO2 capture capacity over five sequential sorption-desorption cycles, suggesting its suitability for the practical capture of CO2.

Directional porous polyimide/polyethylene glycol composite aerogel with enhanced CO2 uptake performance

The cost of CO2 separation and energy consumption can be decreased through the use of CO2 adsorption. Due to the electron-rich heteroatoms in its network, polyimide (PI) has a remarkable affinity for CO2. Polyethylene glycol (PEG) can increase the layer spacing of polymers, so as to change the mass transfer of CO2 in it. Furthermore, the ether bond (-O-) in PEG has good affinity for CO2. In this study, PEG-1000 was introduced into PI aerogel by mild sol-gel method at low temperature, and freeze-drying was used to produce PI/PEG composite aerogels with directional pore structure. The effect of PEG-1000 content and directional pore structure of the PI/PEG composite aerogels on CO2 adsorption performance were further studied. The L-PI/PEG-4 composite aerogel, which contains 4  g PEG and is directionally frozen in liquid nitrogen, has a CO2 adsorption capacity of 16.76 cm3/g at 25°C and 1 bar. L-PI/PEG-4 aerogel also exhibits high CO2/N2 selectivity and adsorption cycle stability.

Hierarchical Metal-Organic Aerogel as a Highly Selective and Sustainable CO2 Adsorbent

Typical amorphous aerogels pose great potential for CO₂ adsorbents with high surface areas and facile diffusion, but they lack well-defined porosity and specific selectivity, inhibiting utilization of their full functionality. To assign well-defined porous structures to aerogels, a hierarchical metal-organic aerogel (HMOA) is designed, which consists of well-defined micropores (d ∼ 1 nm) by coordinative integration with chromium(III) and organic ligands. Due to its hierarchical structure with intrinsically flexible coordination, the HMOA has excellent porous features of a high surface area and a reusable surface with appropriate binding energy for CO₂ adsorption. The HMOA features high CO₂ adsorption capacity, high CO₂/N₂ IAST selectivity, and vacuum-induced surface regenerability (100% through 20 cycles). Further, the HMOA could be prepared via simple ambient drying methods while retaining the microporous network. This unique surface-tension-resistant micropore formation and flexible coordination systems of HMOA make it a potential candidate for a CO₂ adsorbent with industrial scalability and reproducibility.

A new comprehensive evaluation indicator of adsorbent for gas separation

To evaluate and compare the performances of different adsorbents for gas separation, an adsorbent comprehensive evaluation indicator (ACEI) is proposed. In the ACEI, the working capacity, selectivity, adsorption rate, regeneration and circulation parameters, stability during adsorption, and tolerance to impurities are considered, and some exponents are introduced to allow the ACEI to adapt to different adsorbent working conditions. To illustrate the applicability of the ACEI, the adsorption of CO₂ and N₂ was investigated on two kinds of activated carbons (ACs), which were used for gas purification and bulk separation. The ACEI is a better overall indicator than other currently used indicators to evaluate the performance of adsorbents.

Synthesis of palm sheath derived-porous carbon for selective CO2 adsorption

Biomass-derived porous carbons are regarded as the most preferential adsorbents for CO₂ capture due to their well-developed textural properties, tunable porosity and low cost. Herein, novel porous carbons were facilely prepared by activation of palm sheath for the highly selective separation of CO₂ from gas mixtures. The textural features of carbon materials were characterized by the analysis of surface morphology and N₂ isotherms for textural characterization. The as-prepared carbon adsorbents possess an excellent CO₂ adsorption capacity of 3.48 mmol g⁻¹ (298 K) and 5.28 mmol g⁻¹ (273 K) at 1 bar, and outstanding IAST selectivities of CO₂/N₂, CO₂/CH₄, and CH₄/N₂ up to 32.7, 7.1 and 4.6 at 298 K and 1 bar, respectively. Also, the adsorption evaluation criteria of the vacuum swing adsorption (VSA) process, the breakthrough experiments, and the cyclic experiments have comprehensively demonstrated the palm sheath derived porous carbons as efficient adsorbents for practical applications.

Novel porous carbons were facilely prepared by activation of palm sheath for the highly selective separation of CO₂ from gas mixtures.

The AEROPILs Generation: Novel Poly(Ionic Liquid)-Based Aerogels for CO2 Capture

CO₂ levels in the atmosphere are increasing exponentially. The current climate change effects motivate an urgent need for new and sustainable materials to capture CO₂. Porous materials are particularly interesting for processes that take place near atmospheric pressure. However, materials design should not only consider the morphology, but also the chemical identity of the CO₂ sorbent to enhance the affinity towards CO₂. Poly(ionic liquid)s (PILs) can enhance CO₂ sorption capacity, but tailoring the porosity is still a challenge. Aerogel’s properties grant production strategies that ensure a porosity control. In this work, we joined both worlds, PILs and aerogels, to produce a sustainable CO₂ sorbent. PIL-chitosan aerogels (AEROPILs) in the form of beads were successfully obtained with high porosity (94.6–97.0%) and surface areas (270–744 m²/g). AEROPILs were applied for the first time as CO₂ sorbents. The combination of PILs with chitosan aerogels generally increased the CO₂ sorption capability of these materials, being the maximum CO₂ capture capacity obtained (0.70 mmol g⁻¹, at 25 °C and 1 bar) for the CHT:P[DADMA]Cl_30%AEROPIL.

Rearranged Copolyurea Networks for Selective Carbon Dioxide Adsorption at Room Temperature

Copolyurea networks (co-UNs) were synthesized via crosslinking polymerization of a mixture of tetrakis(4-aminophenyl)methane (TAPM) and melamine with hexamethylene diisocyanate (HDI) using the organic sol-gel polymerization method. The subsequent thermal treatment of between 200 and 400 °C induced the sintering of the powdery polyurea networks to form porous frameworks via urea bond rearrangement and the removal of volatile hexamethylene moieties. Incorporating melamine into the networks resulted in a higher nitrogen content and micropore ratio, whereas the overall porosity decreased with the melamine composition. The rearranged network composed of the tetraamine/melamine units in an 80:20 ratio showed the highest carbon dioxide adsorption quantity at room temperature. The results show that optimizing the chemical structure and porosity of polyurea-based networks can lead to carbon dioxide adsorbents working at elevated temperatures.

Pyrene-based ammonium bromides combined with g-C3N4 for the synergistically enhanced fixation reaction of CO2 and epoxides

A new type of pyrene-based ammonium bromides (PABs) was synthesized via the reaction of bromomethyl pyrene and tertiary amines with different alkyl chains combined with graphitic carbon nitride (g-C3N4) through π-π stacking interactions. The new pyrene-based ammonium bromides were investigated both in homogenous phase and heterogeneous phase combining with g-C3N4 for the CO2 fixation reaction of epoxides under mild conditions. Obviously, the combination was proved to be an efficient system for the conversion of epoxides. The interaction between g-C3N4 and PABs was confirmed by quantum chemical calculations. g-C3N4/Py-C12 exhibited an excellent yield of cyclic carbonates (above 93%) at 80 °C, atmospheric pressure and solvent-free conditions. A preliminary kinetic study was performed using g-C3N4/Py-C12 and the activation energy was calculated to be 61.5 kJ mol-1.

Impact of structure, doping and defect-engineering in 2D materials on CO2 capture and conversion

2D material based strategies for adsorption and conversion of CO2 to value-added products.

Nanoscale Assembly of 2D Materials for Energy and Environmental Applications

Rational design of 2D materials is crucial for the realization of their profound implications in energy and environmental fields. The past decade has witnessed significant developments in 2D material research, yet a number of critical challenges remain for real-world applications. Nanoscale assembly, precise control over the orientational and positional ordering, and complex interfaces among 2D layers are essential for the continued progress of 2D materials, especially for energy storage and conversion and environmental remediation. Herein, recent progress, the status, future prospects, and challenges associated with nanoscopic assembly of 2D materials are highlighted, specifically targeting energy and environmental applications. Geometric dimensional diversity of 2D material assembly is focused on, based on novel assembly mechanisms, including 1D fibers from the colloidal liquid crystalline phase, 2D films by interfacial tension (Marangoni effect), and 3D nanoarchitecture assembly by electrochemical processes. Relevant critical advantages of 2D material assembly are highlighted for application fields, including secondary batteries, supercapacitors, catalysts, gas sensors, desalination, and water decontamination.

Tuning the visible-light photocatalytic degradation activity of thin nanosheets constructed porous g-C3N4 microspheres by decorating ionic liquid modified carbon dots: roles of heterojunctions and surface charges

The visible-light photocatalytic degradation activity of thin nanosheets constructed g-C₃N₄ microspheres was tuned by decorating ionic liquid modified carbon dots.

Nitrogen-doped metal-free carbon catalysts for (electro)chemical CO2 conversion and valorisation

This review focuses on the recent developments made in the fabrication of N-doped carbon materials for enhanced CO₂ conversion and electrochemical reduction into high-value-added products.

Highly Surface-Active Ca(OH)2 Monolayer as a CO2 Capture Material

Greenhouse gas emissions originating from fossil fuel combustion contribute significantly to global warming, and therefore the design of novel materials that efficiently capture CO₂ can play a crucial role in solving this challenge. Here, we show that reducing the dimensionality of bulk crystalline portlandite results in a stable monolayer material, named portlandene, that is highly effective at capturing CO₂. On the basis of theoretical analysis comprised of ab initio quantum mechanical calculations and force-field molecular dynamics simulations, we show that this single-layer phase is robust and maintains its stability even at high temperatures. The chemical activity of portlandene is seen to further increase upon defect engineering of its surface using vacancy sites. Defect-containing portlandene is capable of separating CO and CO₂ from a syngas (CO/CO₂/H₂) stream, yet is inert to water vapor. This selective behavior and the associated mechanisms have been elucidated by examining the electronic structure, local charge distribution, and bonding orbitals of portlandene. Additionally, unlike conventional CO₂ capturing technologies, the regeneration process of portlandene does not require high temperature heat treatment because it can release the captured CO₂ by application of a mild external electric field, making portlandene an ideal CO₂ capturing material for both pre- and postcombustion processes.

A Hierarchical Z-Scheme α-Fe2 O3 /g-C3 N4 Hybrid for Enhanced Photocatalytic CO2 Reduction

The challenge in the artificial photosynthesis of fossil resources from CO₂ by utilizing solar energy is to achieve stable photocatalysts with effective CO₂ adsorption capacity and high charge-separation efficiency. A hierarchical direct Z-scheme system consisting of urchin-like hematite and carbon nitride provides an enhanced photocatalytic activity of reduction of CO₂ to CO, yielding a CO evolution rate of 27.2 µmol g^-1 h^-1 without cocatalyst and sacrifice reagent, which is >2.2 times higher than that produced by g-C₃ N₄ alone (10.3 µmol g^-1 h^-1 ). The enhanced photocatalytic activity of the Z-scheme hybrid material can be ascribed to its unique characteristics to accelerate the reduction process, including: (i) 3D hierarchical structure of urchin-like hematite and preferable basic sites which promotes the CO₂ adsorption, and (ii) the unique Z-scheme feature efficiently promotes the separation of the electron-hole pairs and enhances the reducibility of electrons in the conduction band of the g-C₃ N₄ . The origin of such an obvious advantage of the hierarchical Z-scheme is not only explained based on the experimental data but also investigated by modeling CO₂ adsorption and CO adsorption on the three different atomic-scale surfaces via density functional theory calculation. The study creates new opportunities for hierarchical hematite and other metal-oxide-based Z-scheme system for solar fuel generation.

Graphene Oxide-Polymer Composite Langmuir Films Constructed by Interfacial Thiol-Ene Photopolymerization

The effective synthesis and self-assembly of graphene oxide (GO) nanocomposites are of key importance for a broad range of nanomaterial applications. In this work, a one-step chemical strategy is presented to synthesize stable GO-polymer Langmuir composite films by interfacial thiol-ene photopolymerization at room temperature, without use of any crosslinking agents and stabilizing agents. It is discovered that photopolymerization reaction between thiol groups modified GO sheets and ene in polymer molecules is critically responsible for the formation of the composite Langmuir films. The film formed by Langmuir assembly of such GO-polymer composite films shows potential to improve the mechanical and chemical properties and promotes the design of various GO-based nanocomposites. Thus, the GO-polymer composite Langmuir films synthesized by interfacial thiol-ene photopolymerization with such a straightforward and clean manner, provide new alternatives for developing chemically modified GO-based hybrid self-assembled films and nanomaterials towards a range of soft matter and graphene applications.

Heterogeneous electrochemical CO2 reduction using nonmetallic carbon-based catalysts: current status and future challenges

Electrochemical CO₂ reduction (ECR) offers an important pathway for renewable energy storage and fuels production. It still remains a challenge in designing highly selective, energy-efficient, robust, and cost-effective electrocatalysts to facilitate this kinetically slow process. Metal-free carbon-based materials have features of low cost, good electrical conductivity, renewability, diverse structure, and tunability in surface chemistry. In particular, surface functionalization of carbon materials, for example by doping with heteroatoms, enables access to unique active site architectures for CO₂ adsorption and activation, leading to interesting catalytic performances in ECR. We aim to provide a comprehensive review of this category of metal-free catalysts for ECR, providing discussions and/or comparisons among different nonmetallic catalysts, and also possible origin of catalytic activity. Fundamentals and some future challenges are also described.

Smart textiles of MOF/g-C3N4 nanospheres for the rapid detection/detoxification of chemical warfare agents

Smart textiles consisting of cotton, Cu-BTC MOF and oxidized graphitic carbon nitride, g-C₃N₄-ox, nanospheres were synthesized and tested as nerve agent detoxification media and colorimetric detectors. Combining Cu-BTC and g-C₃N₄-ox resulted in a nanocomposite (MOFgCNox) of heterogeneous porosity and chemistry. Upon the deposition of MOFgCNox onto cotton textiles, a stable fabric with a supreme photocatalytic detoxification ability towards the nerve gas surrogate, dimethyl chlorophosphate, was obtained. The detoxification process was accompanied by a visible and gradual color change, which can be used for the selective detection of chemical warfare agents and for monitoring their penetration inside a protective layer. These smart textiles adsorbed almost 7 g of CWA surrogate/its detoxification products per gram of Cu. The superior performance was linked to the high dispersion of the MOF crystals on the fibers, and a specific texture promoting the availability of the active copper centers.

Recent advances in functional mesoporous graphitic carbon nitride (mpg-C3N4) polymers

Mesoporous micro-/nanostructures acting as supports for catalysts or used directly in catalysis reactions generally show fascinating performances that could lead to great potential for application. In the past few decades, extensive efforts have been devoted to the exploration and enrichment of graphitic carbon nitride (g-C₃N₄) based research. Especially, mesoporous g-C₃N₄ (mpg-C₃N₄) with controllable porosity and electronic/atomic structure can bring to bear unique physicochemical properties and has been widely applied in the fields of photocatalysis, adsorbents, sensors and chemical templates. However, a comprehensive summary on mpg-C₃N₄ micro/nanostructures is less reported and there is an urgent need to further promote the development of function-oriented mpg-C₃N₄-based materials. Herein, we will overview the significant advances in functional mpg-C₃N₄ polymers, including general synthesis strategies and growth mechanisms, modifications of electronic/atomic structures and interfacial properties (such as exfoliation, doping and hybridizing), as well as their current applications. Finally, several emerging issues and perspectives are also proposed.

Metal-Organic Framework as a Protective Coating for Biodiagnostic Chips

Zeolitic imidazolate framework-8 (ZIF-8) grown around antibodies anchored to plasmonic nanostructures serves as a protective layer to preserve the biorecognition ability of antibodies stored at room and elevated temperatures for several days. The biofunctionality of the ZIF-8-protected biochip can be restored by a simple water-rinsing step, making it highly convenient for use in point-of-care and resource-limited settings.

The preparation of a porous melamine–formaldehyde adsorbent grafted with polyethyleneimine and its CO2 adsorption behavior

A porous amino resin with a high content of hydroxymethyl groups was prepared via the polycondensation of an excess of formaldehyde with melamine. PEI was then grafted onto the porous amino resin to synthesize a solid amine adsorbent for CO₂ adsorption.

g-C3N4 and tetrabutylammonium bromide catalyzed efficient conversion of epoxide to cyclic carbonate under ambient conditions

A g-C₃N₄ and n-Bu₄N⁺Br⁻ combination was found to be an efficient catalyst for the conversion of epoxides to cyclic carbonates under CO₂ filled balloon conditions.

Oxidized g-C3 N4 Nanospheres as Catalytically Photoactive Linkers in MOF/g-C3 N4 Composite of Hierarchical Pore Structure

A unique composite of the copper-based metal-organic framework (Cu-benzene tricarboxylic acid (BTC)) with oxidized graphitic carbon nitride nanospheres is synthesized. For comparison, a hybrid material consisting of g-C₃ N₄ and Cu-BTC is also obtained. Their surface features are analyzed using Fourier transform infrared spectroscopy, X-ray diffraction, sorption of nitrogen, thermal analysis, scanning electron microscopy, photoluminescence, and diffuse reflectance UV-Vis spectroscopy. The results suggest that the formed nanospheres of oxidized g-C₃ N₄ act as linkers between the copper sites, playing a crucial role in the composite building process. Their incorporation to the Cu-BTC framework causes the development of new mesoporosity. Remarkable alterations in the optical properties, as a result of the coordination of oxygen containing functional groups of the oxidized graphitic carbon nitride to the copper atoms of the framework, suggest an increase in photoreactivity. On the other hand, for the hybrid material consisting of Cu-BTC and g-C₃ N₄ , the unaltered pore volume and optical properties support the formation of a physical mixture rather than of a composite. The tests on reactive adsorption and detoxification of G-series organophosphate nerve agent surrogate show the enhanced performance of the composite as catalysts and photocatalyst in visible light.

Divalent Fe Atom Coordination in Two-Dimensional Microporous Graphitic Carbon Nitride

Graphitic carbon nitride (g-C3N4) is a rising two-dimensional material possessing intrinsic semiconducting property with unique geometric configuration featuring superimposed heterocyclic sp(2) carbon and nitrogen network, nonplanar layer chain structure, and alternating buckling. The inherent porous structure of heptazine-based g-C3N4 features electron-rich sp(2) nitrogen, which can be exploited as a stable transition metal coordination site. Multiple metal-functionalized g-C3N4 systems have been reported for versatile applications, but local coordination as well as its electronic structure variation upon incoming metal species is not well understood. Here we present detailed bond coordination of divalent iron (Fe(2+)) through micropore sites of graphitic carbon nitride and provide both experimental and computational evidence supporting the aforementioned proposition. In addition, the utilization of electronic structure variation is demonstrated through comparative photocatalytic activities of pristine and Fe-g-C3N4.

Photoelectrochemical Conversion from Graphitic C3N4 Quantum Dot Decorated Semiconductor Nanowires

Despite the recent progress of developing graphitic carbon nitride (g-C3N4) as a metal-free photocatalyst, the synthesis of nanostructured g-C3N4 has still remained a complicated and time-consuming approach from its bulk powder, which substantially limits its photoelectrochemical (PEC) applications as well as the potential to form composites with other semiconductors. Different from the labor-intensive methods used before, such as exfoliation or assistant templates, herein, we developed a facile method to synthesize graphitic C3N4 quantum dots (g-CNQDs) directly grown on TiO2 nanowire arrays via a one-step quasi-chemical vapor deposition (CVD) process in a homemade system. The as-synthesized g-CNQDs uniformly covered over the surface of TiO2 nanowires and exhibited attractive photoluminescence (PL) properties. In addition, compared to pristine TiO2, the heterojunction of g-CNQD-decorated TiO2 nanowires showed a substantially enhanced PEC photocurrent density of 3.40 mA/cm(2) at 0 V of applied potential vs Ag/AgCl under simulated solar light (300 mW/cm(2)) and excellent stability with ∼82% of the photocurrent retained after over 10 h of continuous testing, attributed to the quantum and sensitization effects of g-CNQDs. Density functional theory calculations were further carried out to illustrate the synergistic effect of TiO2 and g-CNQD. Our method suggests that a variety of g-CNQD-based composites with other semiconductor nanowires can be synthesized for energy applications.

A DFT study of planar vs. corrugated graphene-like carbon nitride (g-C3N4) and its role in the catalytic performance of CO2 conversion

Graphene-like carbon nitride (g-C₃N₄), a metal-free 2D material that is of interest as a CO₂ reduction catalyst, is stabilised by corrugation in order to minimise the electronic repulsions experienced by the N lone pairs located in their structural holes.

Graphitic carbon nitride “reloaded”: emerging applications beyond (photo)catalysis

Despite being one of the oldest materials described in the chemical literature, graphitic carbon nitride (g-C₃N₄) has just recently experienced a renaissance as a highly active photo/electrocatalyst, and the metal-free polymer was also shown to be have diverse applications in various fields.