Atomistic Interrogation of B-N Co-dopant Structures and Their Electronic Effects in Graphene

Role of Curvature in Stabilizing Boron-Doped Nanocorrugated Graphene

Boron-doped carbon nanostructures have attracted great interest recently because of their remarkable electrocatalytic performance comparable to or better than that of conventional metal catalysts. In a previous work (Carbon 123, 605 (2017)), we reported that along with significant performance improvement, B doping enhances the oxidation resistance of few-layer graphene (FLG) that provides increased structural stability for intermediate-temperature fuel-cell electrodes. In general, detailed characterization of the atomic and electronic structure transformations that occur in B-doped carbon nanostructures during fuel-cell operation is lacking. In this work, we use aberration-corrected scanning transmission electron microscopy, nanobeam electron diffraction, and electron energy-loss spectroscopy (EELS) to characterize the atomic and electronic structures of B-doped FLG before and after fuel-cell operation. These data point to the nanoscale corrugation of B-doped FLGs as the key factor responsible for increased stability and high corrosion resistance. The similarity of the 1s to π* and σ* transition features in the B K-edge EELS to those in B-doped carbon nanotubes provides an estimate for the curvature of nanocorrugation in B-FLG.

Constructing Active BN Sites in Carbon Nanosheets for High-Capacity and Fast Charging Toward Potassium Ion Storage

Nitrogen doping is an effective strategy to improve potassium ion storage of carbon electrodes via the creation of adsorption sites. However, various undesired defects are often uncontrollably generated during the doping process, limiting doping effect on capacity enhancement and deteriorating the electric conductivity. Herein, boron element is additionally introduced to construct 3D interconnected B, N co-doped carbon nanosheets to remedy these adverse effects. This work demonstrates that boron incorporation preferentially converts pyrrolic N species into BN sites with lower adsorption energy barrier, further enhancing the capacity of B, N co-doped carbon. Meanwhile, the electric conductivity is modulated via the conjugation effect between the electron-rich N and electron-deficient B, accelerating the charge-transfer kinetics of potassium ions. The optimized samples deliver a high specific capacity, high rate capability, and long-term cyclic stability (532.1 mAh g^-1 at 0.05 A g^-1 , 162.6 mAh g^-1 at 2 A g^-1 over 8000 cycles). Furthermore, hybrid capacitors using the B, N co-doped carbon anode deliver a high energy and power density with excellent cycle life. This study demonstrates a promising approach using BN sites for adsorptive capacity and electric conductivity enhancement in carbon materials for electrochemical energy storage applications.

Nitrogen and boron co-doped carbon dots as a novel fluorescent probe for fluorogenic sensing of Ce4+ and ratiometric detection of Al3

Carbon dots have been widely focused on the field of metal ion detection due to their excellent optical property. Herein, novel orange fluorescent nitrogen and boron co-doped carbon dots (NB-CDs) are obtained by one-pot solvothermal using p-phenylenediamine and boric acid as raw materials. The NB-CDs exhibit excitation-independent emissions and the maximum emission wavelength is 597 nm at 420 nm excitation. The fluorescence can be quenched by Ce⁴⁺ effectively and selectively, and the detection range of Ce⁴⁺ is gained from 0.14 to 180 μM with a detection limit of as low as 0.14 μM. Furthermore, Al³⁺ can also recombine with NB-CDs surface functional groups, which shows a detection range from 1.07 to 100 μM and a detection limit of as low as 1.07 μM, accompanied with a blue-shift to 527 nm.

Highly Selective Metal-Free Electrochemical Production of Hydrogen Peroxide on Functionalized Vertical Graphene Edges

Electrochemical generation of hydrogen peroxide (H₂ O₂ ) is an attractive alternative to the energy-intensive anthraquinone oxidation process. Metal-free carbon-based materials such as graphene show great promise as efficient electrocatalysts in alkaline media. In particular, the graphene edges possess superior electrochemical properties than the basal plane. However, identification and enhancement of the catalytically active sites at the edges remain challenging. Furthermore, control of surface wettability to enhance gas diffusion and promote the performance in bulk electrolysis is largely unexplored. Here, a metal-free edge-rich vertical graphene catalyst is synthesized and exhibits a superior performance for H₂ O₂ production, with a high onset potential (0.8 V versus reversible hydrogen electrode (RHE) at 0.1 mA cm^-2 ) and 100% Faradaic efficiency at various potentials. By tailoring the oxygen-containing functional groups using various techniques of electrochemical oxidation, thermal annealing and oxygen plasma post-treatment, the edge-bound in-plane ether-type (COC) groups are revealed to account for the superior catalytic performance. To manipulate the surface wettability, a simple vacuum-based method is developed to effectively induce material hydrophobicity by accelerating hydrocarbon adsorption. The increased hydrophobicity greatly enhances gas transfer without compromising the Faradaic efficiency, enabling a H₂ O₂ productivity of 1767 mmol g_catalyst ^-1 h^-1 at 0.4 V versus RHE.

High surface area nitrogen-functionalized Ni nanozymes for efficient peroxidase-like catalytic activity

Nitrogen-functionalization is an effective means of improving the catalytic performances of nanozymes. In the present work, plasma-assisted nitrogen modification of nanocolumnar Ni GLAD films was performed using an ammonia plasma, resulting in an improvement in the peroxidase-like catalytic performance of the porous, nanostructured Ni films. The plasma-treated nanozymes were characterized by TEM, SEM, XRD, and XPS, revealing a nitrogen-rich surface composition. Increased surface wettability was observed after ammonia plasma treatment, and the resulting nitrogen-functionalized Ni GLAD films presented dramatically enhanced peroxidase-like catalytic activity. The optimal time for plasma treatment was determined to be 120 s; when used to catalyze the oxidation of the colorimetric substrate TMB in the presence of H2O2, Ni films subjected to 120 s of plasma treatment yielded a much higher maximum reaction velocity (3.7⊆10-8 M/s vs. 2.3⊆10-8 M/s) and lower Michaelis-Menten coefficient (0.17 mM vs. 0.23 mM) than pristine Ni films with the same morphology. Additionally, we demonstrate the application of the nanozyme in a gravity-driven, continuous catalytic reaction device. Such a controllable plasma treatment strategy may open a new door toward surface-functionalized nanozymes with improved catalytic performance and potential applications in flow-driven point-of-care devices.

Integrating single-cobalt-site and electric field of boron nitride in dechlorination electrocatalysts by bioinspired design

The construction of enzyme-inspired artificial catalysts with enzyme-like active sites and microenvironment remains a great challenge. Herein, we report a single-atomic-site Co catalyst supported by carbon doped boron nitride (BCN) with locally polarized B-N bonds (Co SAs/BCN) to simulate the reductive dehalogenases. Density functional theory analysis suggests that the BCN supports, featured with ionic characteristics, provide additional electric field effect compared with graphitic carbon or N-doped carbon (CN), which could facilitate the adsorption of polarized organochlorides. Consistent with the theoretical results, the Co SAs/BCN catalyst delivers a high activity with nearly complete dechlorination (~98%) at a potential of -0.9 V versus Ag/AgCl for chloramphenicol (CAP), showing that the rate constant (k) contributed by unit mass of metal (k/ratio) is 4 and 19 times more active than those of the Co SAs/CN and state-of-the-art Pd/C catalyst, respectively. We show that Co single atoms coupled with BCN host exhibit high stability and selectivity in CAP dechlorination and suppress the competing hydrogen evolution reaction, endowing the Co SAs/BCN as a candidate for sustainable conversion of organic chloride.

ZnSnO3–hBN nanocomposite-based piezocatalyst: ultrasound assisted reactive oxygen species generation for degradation of organic pollutants

Ultrasound assisted sustainable degradation of RhB by a lead-free ferroelectric ZnSnO₃–hBN piezocatalyst.

Multiplexed ratiometric photoluminescent detection of pyrophosphate using anisotropic boron-doped nitrogen-rich carbon rugby ball-like nanodots

B-doped N-rich carbon rugby ball-like nanodots have been synthesized by a heterophase polymerization route and can act not only as a ratiometric sensor for Hg²⁺ but also as a dual-mode PPi-selective sensor.

Heteroatom-doped Carbon Spheres from Hierarchical Hollow Covalent Organic Framework Precursors for Metal-Free Catalysis

Covalent organic frameworks (COFs) with hollow structures hold great promise for developing new types of functional materials. Herein, we report a hollow spherical COF with a hierarchical shell, which serves as an effective precursor of B,N-codoped hierarchical hollow carbon spheres. Benefiting from the synergistic effects of hierarchical porosity, high surface area, and B,N-codoping, the as-synthesized carbon spheres show prospective utility as metal-free catalysts in nitroarene reduction. A mechanistic hypothesis is proposed based on theoretical and experimental studies. Boron atoms situated meta to pyridinic N atoms are identified to be the main catalytic active sites. The anti-aromaticity originating from the codoping of B and pyridinic N atoms, not charge distribution and deformation energy, is confirmed to play a pivotal role in the catalytic reaction.

NanoVelcro: Theory of Guided Folding in Atomically Thin Sheets with Regions of Complementary Doping

Folding has been commonly observed in two-dimensional materials such as graphene and monolayer transition metal dichalcogenides. Although interlayer coupling stabilizes these folds, it provides no control over the placement of the fold, let alone the final folded shape. Lacking nanoscale "fingers" to externally guide folding, control requires interactions engineered into the sheets that guide them toward a desired final folded structure. Here we provide a theoretical framework for a general methodology toward this end: atomically thin 2D sheets are doped with patterns of complementary n-type and p-type regions whose preferential adhesion favors folding into desired shapes. The two-colorable theorem in flat-foldable origami ensures that arbitrary folding patterns are in principle accessible to this method. This complementary doping method can be combined with nanoscale crumpling (by, for example, passage of 2D sheets through holes) to obtain not only control over fold placements but also the ability to distinguish between degenerate folded states, thus attaining nontrivial shapes inaccessible to sequential folding.