Gene Expression in Electron-Beam-Irradiated Bacteria in Reply to "Live Cell Electron Microscopy Is Probably Impossible"

Some living eukaryotes during and after scanning electron microscopy

Electron microscopy (EM) is an essential imaging method in biological sciences. Since biological specimens are exposed to radiation and vacuum conditions during EM observations, they die due to chemical bond breakage and desiccation. However, some organisms belonging to the taxa of bacteria, fungi, plants, and animals (including beetles, ticks, and tardigrades) have been reported to survive hostile scanning EM (SEM) conditions since the onset of EM. The surviving organisms were observed (i) without chemical fixation, (ii) after mounting to a precooled cold stage, (iii) using cryo-SEM, or (iv) after coating with a thin polymer layer, respectively. Combined use of these techniques may provide a better condition for preservation and live imaging of multicellular organisms for a long time beyond live-cell EM.

Fiber-optic sample illuminator design for the observation of light induced phenomena with transmission electron microscopy in situ: Antimicrobial photodynamic therapy

Antibacterial photodynamic therapy is a promising treatment for problematic infections caused by bacteria and fungi. Despite its undoubted effectiveness, the ultrastructural mechanism of microbial death remains not fully described and distinct organisms respond to the treatment with different efficacy. For this reason, it was decided to try imaging the process using the in situ transmission electron microscopy method. To conduct an observational experiment, the microscope was significantly modified. Liquid cell methods were used, electron doses and their influence on the sample were estimated, and a fiber-optic sample illuminator was designed and built. The modifications allowed for the light-induced characterization of photosensitizer-bacteria interaction. Microscope modification is a promising platform for further studies of light-induced phenomena in both life and material science.

Electron Microscopy Imaging Applications of Room Temperature Ionic Liquids in the Biological Field: A Review

For biological imaging using electron microscopy (EM), the use of room-temperature ionic liquids (RTILs) has been proposed as an alternative to traditional lengthy preparation methods. With their low vapor pressures and conductivity, RTILs can be applied onto hard-to-image soft and/or wet samples without dehydration - allowing for a more representative, hydrated state of material and opening the possibility for visualization of in situ physiological processes using conventional EM systems. However, RTILs have yet to be utilized to their full potential by microscopists and microbiologists alike. To this end, this review aims to provide a comprehensive summary of biological applications of RTILs for EM to bridge the RTIL, in situ microscopy, and biological communities. We outline future research avenues for the use of RTILs for the EM observation of biological samples, notably i) RTIL selection and optimization, ii) applications for live cell processes and iii) electron beam and ionic liquid interaction studies.

Light-induced in situ transmission electron microscopy: Novel approach for antimicrobial photodynamic therapy imaging

The novel approach for imaging of antimicrobial photodynamic therapy processes presented in this work is based on transmission electron microscopy methods. With the use of liquid cell, illumination system, and lowered electron dose the successful light-induced in-situ observations on Staphylococcus aureus encapsulated with methylene blue were performed. Results showed that with specified imaging parameters it is possible to conduct reliable research on bacteria in electron microscope despite the unfavorable damaging effect of the highly energetic electron beam used for imaging. This approach differs from the common methods, as it provides direct observations of the processes occurring upon light illumination. The effects obtained with the proposed method are very promising and may serve to answer why different microorganisms respond to the therapy differently.

X-ray-Based Techniques to Study the Nano-Bio Interface

X-ray-based analytics are routinely applied in many fields, including physics, chemistry, materials science, and engineering. The full potential of such techniques in the life sciences and medicine, however, has not yet been fully exploited. We highlight current and upcoming advances in this direction. We describe different X-ray-based methodologies (including those performed at synchrotron light sources and X-ray free-electron lasers) and their potentials for application to investigate the nano-bio interface. The discussion is predominantly guided by asking how such methods could better help to understand and to improve nanoparticle-based drug delivery, though the concepts also apply to nano-bio interactions in general. We discuss current limitations and how they might be overcome, particularly for future use in vivo.

Electron and X-ray Focused Beam-Induced Cross-Linking in Liquids: Toward Rapid Continuous 3D Nanoprinting and Interfacing using Soft Materials

Multiphoton polymer cross-linking evolves as the core process behind high-resolution additive microfabrication with soft materials for implantable/wearable electronics, tissue engineering, microrobotics, biosensing, drug delivery, etc. Electrons and soft X-rays, in principle, can offer even higher resolution and printing rates. However, these powerful lithographic tools are difficult to apply to vacuum incompatible liquid precursor solutions used in continuous additive fabrication. In this work, using biocompatible hydrogel as a model soft material, we demonstrate high-resolution in-liquid polymer cross-linking using scanning electron and X-ray microscopes. The approach augments the existing solid-state electron/X-ray lithography and beam-induced deposition techniques with a wider class of possible chemical reactions, precursors, and functionalities. We discuss the focused beam cross-linking mechanism, the factors affecting the ultimate feature size, and layer-by-layer printing possibilities. The potential of this technology is demonstrated on a few practically important applications such as in-liquid encapsulation of nanoparticles for plasmonic sensing and interfacing of viable cells with hydrogel electrodes.

A pressure-actuated flow cell for soft X-ray spectromicroscopy in liquid media

We present and fully characterize a flow cell dedicated to imaging in liquid at the nanoscale. Its use as a routine sample environment for soft X-ray spectromicroscopy is demonstrated, in particular through the spectral analysis of inorganic particles in water. The care taken in delineating the fluidic pathways and the precision associated with pressure actuation ensure the efficiency of fluid renewal under the beam, which in turn guarantees a successful utilization of this microfluidic tool for in situ kinetic studies. The assembly of the described flow cell necessitates no sophisticated microfabrication and can be easily implemented in any laboratory. Furthermore, the design principles we relied on are transposable to all microscopies involving strongly absorbed radiation (e.g. X-ray, electron), as well as to all kinds of X-ray diffraction/scattering techniques.

In situ monitoring of exopolymer-dependent Mn mineralization on bacterial surfaces

Bacterial biomineralization is a widespread process that affects cycling of metals in the environment. Functionalized bacterial cell surfaces and exopolymers are thought to initiate mineral formation, however, direct evidences are hampered by technical challenges. Here, we present a breakthrough in the use of liquid-cell scanning transmission electron microscopy to observe mineral growth on bacteria and the exopolymers they secrete. Two Escherichia coli mutants producing distinct exopolymers are investigated. We use the incident electron beam to provoke and observe the precipitation of Mn-bearing minerals. Differences in the morphology and distribution of Mn precipitates on the two strains reflect differences in nucleation site density and accessibility. Direct observation under liquid conditions highlights the critical role of bacterial cell surface charges and exopolymer types in metal mineralization. This has strong environmental implications because biofilms structured by exopolymers are widespread in nature and constitute the main form of microbial life on Earth.

Correlative ex situ and Liquid-Cell TEM Observation of Bacterial Cell Membrane Damage Induced by Rough Surface Topology

BACKGROUND

Nanoscale surface roughness has been suggested to have antibacterial and antifouling properties. Several existing models have attempted to explain the antibacterial mechanism of nanoscale rough surfaces without direct observation. Here, conventional and liquid-cell TEM are implemented to observe nanoscale bacteria/surface roughness interaction. The visualization of such interactions enables the inference of possible antibacterial mechanisms.

METHODS AND RESULTS

Nanotextures are synthesized on biocompatible polymer microparticles (MPs) via plasma etching. Both conventional and liquid-phase transmission electron microscopy observations suggest that these MPs may cause cell lysis via bacterial binding to a single protrusion of the nanotexture. The bacterium/protrusion interaction locally compromises the cell wall, thus causing bacterial death. This study suggests that local mechanical damage and leakage of the cytosol kill the bacteria first, with subsequent degradation of the cell envelope.

CONCLUSION

Nanoscale surface roughness may act via a penetrative bactericidal mechanism. This insight suggests that future research may focus on optimizing bacterial binding to individual nanoscale projections in addition to stretching bacteria between nanopillars. Further, antibacterial nanotextures may find use in novel applications employing particles in addition to nanotextures on fibers or films.

Imaging of soft materials using in situ liquid-cell transmission electron microscopy

This review summarizes the breakthroughs in the field of soft material characterization by in situ liquid-cell transmission electron microscopy (TEM). The focus of this review is mostly on soft biological species such as cells, bacteria, viruses, proteins and polymers. The comparison between the two main liquid-cell systems (silicon nitride membranes liquid cell and graphene liquid cell) is also discussed in terms of their spatial resolution and imaging/analytical capabilities. We have showcased how liquid-cell TEM can reveal the structural details of whole cells, enable the chemical probing of proteins, detect the structural conformation of viruses, and monitor the dynamics of polymerization. In addition, the challenges faced by decoupling electron beam effect on beam-sensitive soft materials are discussed. At the end, future perspectives of in situ liquid-cell TEM studies of soft materials are outlined.

In situ graphene liquid cell-transmission electron microscopy study of insulin secretion in pancreatic islet cells

BACKGROUND

Islet cell transplantation is one of the key treatments for type 1 diabetes. Understanding the mechanisms of insulin fusion and exocytosis are of utmost importance for the improvement of the current islet cell transplantation and treatment of diabetes. These phenomena have not been fully evaluated due either to the lack of proper dynamic imaging, or the lack of proper cell preservation during imaging at nanoscales.

METHODS

By maintaining the native environment of pancreatic β-cells between two graphene monolayer sheets, we were able to monitor the subcellular events using in situ graphene liquid cell (GLC)-transmission electron microscopy (TEM) with both high temporal and high spatial resolution.

RESULTS

For the first time, the nucleation and growth of insulin particles until the later stages of fusion were imaged at nanometer scales. The release of insulin from plasma membrane involves the degradation of plasma membrane and drastic reductions in the shorter axis of the insulin particles. Sequential exocytosis results indicated the nucleation, growth and attachment of the new insulin particles to the already anchored ones, which is thermodynamically favorable due to the reduction in total surface, further reducing the Gibbs free energy. The retraction of the already anchored insulin toward the cell is also monitored for the first time live at nanoscale resolution.

CONCLUSION

Investigation of insulin granule dynamics in β-cells can be investigated via GLC-TEM. Our findings with this technology open new realms for the development of novel drugs on pathological pancreatic β-cells, because this approach facilitates observing the effects of the stimuli on the live cells and insulin granules.

Investigation of the magnetosome biomineralization in magnetotactic bacteria using graphene liquid cell - transmission electron microscopy

Understanding the biomineralization pathways in living biological species is a grand challenge owing to the difficulties in monitoring the mineralization process at sub-nanometer scales. Here, we monitored the nucleation and growth of magnetosome nanoparticles in bacteria and in real time using a transmission electron microscope (TEM). To enable biomineralization within the bacteria, we subcultured magnetotactic bacteria grown in iron-depleted medium and then mixed them with iron-rich medium within graphene liquid cells (GLCs) right before imaging the bacteria under the microscope. Using in situ electron energy loss spectroscopy (EELS), the oxidation state of iron in the biomineralized magnetosome was analysed to be magnetite with trace amount of hematite. The increase of mass density of biomineralized magnetosomes as a function of incubation time indicated that the bacteria maintained their functionality during the in situ TEM imaging. Our results underpin that GLCs enables a new platform to observe biomineralization events in living biological species at unprecedented spatial resolution. Understanding the biomineralization processes in living organisms facilitates the design of biomimetic materials, and will enable a paradigm shift in understanding the evolution of biological species.

Molybdenum Disulfide Surface Modification of Ultrafine-Grained Titanium for Enhanced Cellular Growth and Antibacterial Effect

The commercially pure Ti (CP Ti) and equal-channel angular pressing (ECAP) processed Ti can contribute to the downsizing of medical devices with their superior mechanical properties and negligible toxicity. However, the ECAP-processed pure Ti has the risk of bacterial infection. Here, the coarse- and ultrafine-grained Ti substrates were surface-modified with molybdenum disulfide (MoS2) to improve the cell proliferation and growth with antibacterial effect for further dental applications. According to in vitro tests using the pre-osteoblast of MC3T3-E1 cell and a bacterial model of Escherichia coli (E. coli), MoS2 nanoflakes coated and ECAP-processed Ti substrates showed a significant increase in surface energy and singlet oxygen generation resulting in improved cell attachment and antibacterial effect. In addition, we confirmed the stability of the surface modified Ti substrates in a physiological solution and an artificial bone. Taken together, MoS2 modified and ECAP-processed Ti substrates might be successfully harnessed for various dental applications.

Monitoring the dynamics of cell-derived extracellular vesicles at the nanoscale by liquid-cell transmission electron microscopy

Cell-derived extracellular vesicles (EVs) circulating in body fluids hold promises as bioactive therapeutic agents and as biomarkers to diagnose a wide range of diseases. However nano-imaging methods are needed to characterize these complex and heterogeneous soft materials in their native wet environment. Herein, we exploit liquid-cell transmission electron microscopy (LCTEM) to characterize the morphology and dynamic behavior of EVs in physiological media with nanometer resolution. The beam-induced controlled growth of Au nanoparticles on bilayer membranes is used as an original in situ staining method to improve the contrast of EVs and artificial liposomes. LCTEM provides information about the size distribution and concentration of EVs that are consistent with Cryo-TEM and nanoparticle tracking analysis measurements. Moreover, LCTEM gives a unique insight into the dynamics of EVs depending on their liquid environment. The size-dependent morphology of EVs is sensitive to osmotic stress which tends to transform their spherical shape to ellipsoidal, stomatocyte or discocyte morphologies. In the liquid-cell, EVs exhibit a sub-diffusive motion due to strong interactions between the Au nanoparticles and the liquid-cell windows. Finally, the high-resolution monitoring of EV aggregation and fusion illustrate that LCTEM opens up a new way to study cell-membrane dynamics.