Fish Gill Inspired Crossflow for Efficient and Continuous Collection of Spilled Oil

3D cellulose scaffold with gradient pore structure controlled by hydrogen bond competition: Super-strength and multifunctional oil/water separation

Cellulose-based aerogels offer exceptional promise for oily wastewater treatment, but the challenge of low mechanical strength and limited application functions persists. Inspired by the graded porous structures in the animal skeleton and bamboo stem, we firstly report here a stepwise solvent diffusion-induced phase separation approach for constructing the gradient pore-density three-dimensional (3D) cellulose scaffold (GPDS). Benefiting from the regulation of competitive hydrogen bonding between the anti-solvents and the ionic liquid (IL) in cellulose solution, GPDS exhibits the decreased major channels size and increased minor pores amount gradually along the solvent diffusion direction. These endow GPDS with the characteristics of low density (0.019 g/cm) and super strength (high up to 870 KPa). The application of GPDS in the field of oil-water separation has achieved remarkable results, including oil/organic solvent absorption (13-25 g/gGPDS), immiscible oil-water mixture separation (high efficiency up to 99.8 %, flux > 2000 L/m2·h), and surfactant-stabilized oil-in-water emulsion (efficiency up to 97.7 %). Moreover, a simple hydrophobic treatment further realizes the efficient separation of water-in-oil emulsion (98.5 % efficiency). The as-fabricated GPDS accordingly achieves the multifunctional application in oil-water separation field. Thus, a new avenue is opened to construct 3D cellulose porous scaffold as adsorbent materials in oily wastewater treatment.

Advanced superhydrophobic polylactic acid fibers with high porosity and biodegradability for efficient solvent recovery

The conventional oil-absorbing materials utilized for addressing oil and organic solvent pollution are plagued by the issue of secondary pollution. In this study, biodegradable porous polylactic acid (PLA) fiber materials were prepared using centrifugal spinning technology, with PLA and polyvinyl butyral (PVB) as raw materials. PVB was utilized as a pore-forming agent to fabricate multi-layered porous PLA fiber materials. When the content of PVB in the spinning solution was 14 %, the porous PLA fibers exhibited the maximum specific surface area of 60.7 m2/g and a porosity of up to 85.4 %, interior of the fiber contained numerous mesopores. Additionally, the porous PLA fibers demonstrated excellent superhydrophobic oil absorption properties, with a water static contact angle of 137.8° and oil or organic solvent absorption capacities ranging from 10 to 17.7 g/g. Furthermore, porous PLA fiber materials exhibited outstanding biodegradability, with a degradation mass loss rate of 42.3-45.1 %. Therefore, superhydrophobic and oleophilic biomass-based PLA fiber materials prepared in centrifugal spinning show promising applications in the recovery of organic solvents and oily substances.

Microbubbles enhance oil-in-water emulsion separation in fibrous coalescers

The principle of fibrous coalescers is to induce the coalescence and growth of small oil droplets in oil-in-water emulsions to achieve oil-water separation. However, they are poorly adaptable to emulsions containing high-viscosity oil. In this study, pressurized air is dissolved in the oil-in-water emulsion, microbubbles are released by reducing the pressure, and the emulsion is subsequently processed through a fibrous coalescer. Adding microbubbles altered the oil removal mechanism within the fibrous bed from oil droplet coalescence and growth to oil droplet-microbubble floc flotation, which significantly improved the emulsion separation efficiency of the fibrous bed, especially in complex emulsions containing surfactants and low salinity. Notably, the decrease in the interfacial energy of the oil droplet-microbubble floc caused oil droplets adhered to fibers to detach and renew quickly. Moreover, the curved interfacial tension increased oil droplet buoyancy and kinetic energy collectively drove the detachment of oil droplets from the fibrous bed. Effective, dynamic anti-fouling of the fibrous bed was able to maintain high throughput during long-term emulsion separation. This study provides a theoretical basis for the industrial application of fibrous coalescers for the treatment of oily wastewater produced during extraction high-viscosity crude oil.

Efficient solar-driven crude oil cleanup via graphene/cellulose aerogel with radial and centrosymmetric design

Frequent oil spills pose significant threats to ecosystems; therefore, strict requirements are needed for prompt remediation and reclamation of spilled oil. Influenced by the structure of coniferous trees and their water transport, this experiment used cellulose nanofiber (CNF), polyvinyl alcohol (PVA), and methyltrimethoxysilane (MTMS) to prepare radially centrosymmetric aerogels. By utilizing the in-situ polycondensation reaction of MTMS, CNF, and PVA were connected, and the hydrophobicity and mechanical properties of the aerogel were greatly enhanced. Furthermore, the introduction of graphene oxide (GO), enshrouded within the cross-linked network, engenders heightened photo-thermal effects. The resultant composite aerogel exhibits expeditious oil absorption under solar irradiation and radial layered channel architecture, significantly curtailing the crude oil absorption timeframe (achieving a maximum absorption capacity of 51.7 g/g). Moreover, it demonstrates superior performance in rapidly and repeatedly adsorbing highly viscous crude oil, surpassing existing literature. Notably, continuous absorption of high-viscosity crude oil is achieved by integrating the composite aerogel with a peristaltic pump. This study offers a novel approach to the absorption and retrieval of high-viscosity crude oil, broadening the potential application horizons of CNF-based aerogels within environmental remediation.

Robust and flexible polyester fiber membrane with under-liquid dual superlyophobicity for efficient on-demand oil-water separation

Functional materials with under-liquid dual superlyophobicity have generated a great deal of concern from researchers due to their switchable separation ability oil-water mixtures and emulsions. Conceptually, under-liquid dual superlyophobicity is a Cassie state achievable under-liquid through the synergy of an under-liquid double lyophobic surface and the construction of a highly rough surface. However, obtaining an under-liquid dual superlyophobic surface remains difficult due to its thermodynamic contradiction and complex surface composition. Herein, we successfully prepared a functional coating by modifying the mixture of cellulose nanocrystals (CNCs) and nano-TiO2 with perfluorooctanoic acid (PFOA) via a simple method, then obtained a polyester fiber membrane with under-liquid dual superlyophobicity by roll coating method. The surface wettability of the polyester (PET) membrane was altered, transforming it from the original under-water oleophobic/under-oil superhydrophilic state to the under-water superoleophobic/under-oil superhydrophobic state after coated. The resulting membrane was applied to separate oil and water on-demand. The coated PET membrane exhibited high separation efficiency (>99 %) and high separation flux, effectively separating immiscible oil-water systems as well as oil-in-water and water-in-oil emulsions. The coated PET membrane also demonstrated the ability to perform alternate separation of oil-water mixtures through wetting, washing, and rewetting cycles, with repeated processes up to 10 times without significant reduction in separation efficiency. Furthermore, compared with the previous works, our approach offers a simpler and more convenient method for constructing under-liquid dual superlyophobic surface, making it more suitable for continuous corporate production. This study may provide inspiration for the production and application in large-scale of under-liquid dual superlyophobic membranes.

Highly elastic photothermal nanofibrillated cellulose aerogels for solar-assisted efficient cleanup of viscous oil spill

Frequent oil spills and illegal industrial pollutant discharge cause ecological and resource damages, so it is necessary to establish efficient adsorption and recovery strategies for oils in wastewater. Herein, inspired by solar-driven viscosity-breaking, we propose a facile approach to fabricate multifunctional nanofibrillated cellulose-based aerogel with high elasticity, excellent photothermal conversion, efficient selective oil adsorption and antibacterial properties. Firstly, copper sulfide (CuS) nanoparticles were in situ deposited on the template of oxidative nanofibrillated cellulose (ONC), aiming at achieving efficient photothermal effect and antibacterial properties. Ethylene glycol diglycidyl ether (EGDE) was employed to establish multiple crosslinking network between CuS@ONC and polyethyleneimine (PEI). A thin hydrophobic PMTS layer deposited on the surface of aerogel via a facile gas-solid reaction ensured stable oil selectivity. The resulting composite aerogel can rapidly adsorb oil under solar self-heating, significantly reducing the adsorption time from 25 to 5 min. Furthermore, it exhibits excellent adsorption capacities for various oils, retaining over 92 % of its initial capacity even after 20 adsorption-desorption cycles, and the antibacterial properties extend its lifespan. This work offers a promising method for constructing multifunctional aerogels for efficient oil-water separation, especially beneficial for high-viscosity and high-melting-point oil cleanup.

Hydrophobic Carbon Nitride Nanolayer Enables High-Flux Oil/Water Separation with Photocatalytic Antifouling Ability

Efficient oil/water separation tackles various issues in occasions of oil leakage and oil discharge, such as environmental pollution, recollection of the oil, and saving the water. Herein, a compact superhydrophobic/superoleophilic graphitic carbon nitride nanolayer coated on carbon fiber networks (CNBA/CF) is designed and synthesized for efficient gravity-driven oil/water separation. The CNBA/CF shows excellent oil absorption and an impressive oil/water filtration separation performance. The flux reaches the state-of-art value of 4.29 × 105 L/m2/h for dichloromethane with separation efficiency up to 99%. Successive oil absorption tests, long-term filtration separation, and harsh conditions experiments confirm the remarkable separation and chemical structure stability of the CNBA/CF filter. Besides, the CNBA/CF demonstrates good photocatalytic antifouling ability thanks to the extended visible light absorption and improved charge separation. This work combines the material surface wettability modulation with a photocatalytic self-cleaning property in the fabrication of efficient oil/water separation materials while overcoming the filter fouling issue.

High-Value Oil-Water Separation Materials Prepared from Waste Polyethylene Terephthalate

As one of the most common forms of waste, waste PET is a serious pollutant in natural and human living environments. There is an urgent need to recycle PET. For this study, the complete degradation of PET was realized at a low temperature. A lipophilic hydrophobic membrane was formed on the surface of a stainless steel mesh (SSM) using a simple dip coating method, and an oil-water separation material was successfully prepared. After loading with degradation products, the surface roughness of SSM increased from 19.09 μm to 62.33 μm. The surface changed from hydrophilic to hydrophobic, and the water contact angle increased to 123°. The oil-water separation flux of the modified SSM was 9825 L/(m2·h), and the separation efficiency was 98.99%. The modified SSM had good reuse performance. This hydrophobic modification method can also be used to modify other porous substrates, such as activated carbon, filter paper, foam, and other materials. The porous substrate modified by the degradation product of waste PET was used to prepare oil-water separation materials, not only solving the problem of white pollution but also reducing the dependence on non-renewable resources in the conventional methods used for the preparation of oil-water separation materials. This study provides new raw materials and methods for the industrial production of oil-water separation materials, which have important application prospects.

GO-enhanced Gel Polymer Electrolyte for Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) assembled with gel polymer electrolyte (GPE) have gained great popularity due to their low cost and safety. Nevertheless, the extensive utilization of GPE based AZIBs is hindered by various challenges, such as inadequate conductivity, limited mechanical strength, and unstable electrochemical properties. Herein, through the multiple cross-linking reaction of sodium alginate (SA), polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP) and graphene oxide (GO), a hydrated GPE with high conductivity and excellent mechanical property was prepared. GO formed strong hydrogen-bonding interaction with polymers to build a three-dimensional network structure for ion migration and improved the mechanical property of GPE. The prepared GPE showed high ionic conductivity of 2.89×10-3  S cm-1 and excellent tensile strength of 900 kPa. In addition, the assembled Zn-Li hybrid battery provided a discharge specific capacity retention rate of 67.6 % and a Coulombic efficiency (CE) of approximate 100 % after 1000 cycles at 1 C.

MXene/Graphene modified cellulose aerogel for photo-electro-assisted all-weather cleanup of high-viscous crude oil from spill

The frequent occurrence of oil spills has led to serious environmental pollution and ecological issues. Given the high-viscosity of crude oil, it is essential to develop sorbents with efficient viscosity reduction and sorption capacity in various environmental conditions. Herein, a superhydrophobic carboxymethyl cellulose (CMC) aerogel co-modified by MXene and graphene jointly (M-Mxene/Gr CA) with aligned channels structure was prepared. The aligned channels structure can effectively improve the longitudinal thermal conductivity and reduce the sorption resistance. Through the modification of MXene and graphene, the aerogel realized efficient photo/electro-thermal conversion, thus ensuring its adaption to various working environments. The rapid heat generation can significantly reduce the viscosity of crude oil, achieving rapid recovery. Under one sun illumination (1.0 kW/m2), the surface temperature of M-Mxene/Gr CA can reach 72.6 °C and its sorption capability for high-viscous crude oil reaches 18 g/g. Combining photo-thermal and electro-thermal (0.5 kW/m2 and 23 V), the average sorption rate of crude oil can reach 1.3 × 107 g m-3 s-1. Finally, we present a continuous sorption system to recover offshore oil spills under the assistance of a pump. This work provides a new option for tackling high-viscous offshore oil spills due to its environmental friendliness and fast sorption capacity.

On-Chip Liquid Manipulation via a Flexible Dual-Layered Channel Possessing Hydrophilic/Hydrophobic Dichotomy

The hydrophilic/hydrophobic cooperative interface provides a smart platform to control liquid distribution and delivery. Through the fusion of flexibility and complex structure, we present a manipulable, open, and dual-layered liquid channel (MODLC) for on-demand mechanical control of fluid delivery. Driven by anisotropic Laplace pressure, the mechano-controllable asymmetric channel of MODLC can propel the directional slipping of liquid located between the paired tracks. Upon a single press, the longest transport distance can reach 10 cm with an average speed of ∼3 cm/s. The liquid on the MODLC can be immediately manipulated by pressing or dragging processes, and versatile liquid-manipulating processes on hierarchical MODLC chips have been achieved, including remote droplet magneto-control, continuous liquid distributor, and gas-producing chip. The flexible hydrophilic/hydrophobic interface and its assembly can extend the function and applications of the wettability-patterned interface, which should update our understanding of complex systems for sophisticated liquid transport.

Recent advances in superwetting materials for separation of oil/water mixtures

Engineering surfaces or membranes that allow an efficient oil/water separation is highly desired in a wide spectrum of applications ranging from oily wastewater discharge to offshore oil spill accidents. Recent advances in biomimetics, manufacturing, and characterization techniques have led to remarkable progress in the design of various superwetting materials with special wettability. In spite of exciting progress, formulating a strategy robust enough to guide the design and fabrication of separating surfaces remains a daunting challenge. In this review, we first present an overview of the wettability theory to elucidate how to control the surface morphology and chemistry to regulate oil/water separation. Then, parallel approaches are considered for discussing the separation mechanisms according to different oil/water mixtures, and three separation types were identified including filtration, adsorption and other separation types. Finally, perspectives on the challenges and future research directions in this research area are briefly discussed.

Flexible Janus wood membrane with asymmetric wettability for high-efficient switchable oil/water emulsion separation

Janus membranes have attracted much attention for switchable oil/water separation because they have opposite wetting behavior on each side. However, it remains a challenge to fabricate Janus membranes with asymmetric wettability from biomass by simple methods. Herein, we prepared a flexible Janus wood (JW) membrane by cutting the natural wood along the longitudinal direction, followed by a facile top-down approach. The hydrophobic lignin was removed from the wood to prepare a highly porous and superhydrophilic wood (SW) with underwater superoleophobicity. Then, one side of the SW was sprayed with a mixture of 1H,1H,2H,2H-perfluorooctyltrichlorosilane/SiO2 nanoparticles to form a superhydrophobic surface that hardly affected the wettability of the other side. The obtained JW membrane maintains its selective wettability in harsh environments owing to its durability and stability. Furthermore, it has a switchable, high separation efficiency of >99% for both oil-in-water and water-in-oil emulsions, which can be attributed to the unique wettability and hierarchical micro/nano structure of the JW membrane. Notably, the three-dimensional interconnected micro/nanochannels (pits and nanopores) of the JW membrane are beneficial to the size-sieving effect during emulsion separation. At the same time, the layered channels (tracheids and vessels) enable multiple separations. JW membrane is sustainable, inexpensive, stable, and easy to manufacture, providing more implications for the innovation of biomass-based Janus separation materials in industrial wastewater treatment.

Ultrastable Super-Hydrophobic Surface with an Ordered Scaly Structure for Decompression and Guiding Liquid Manipulation

Directional droplet manipulation is very crucial in microfluidics, intelligent liquid management, etc. However, excessive liquid pressure tends to destroy the solid-gas-liquid (SAL) composite interface, creating a highly adhesive surface, which is not conducive to liquid transport. Herein, we propose a strategy to enhance the surface durability, in which the surface cannot withstand liquid pressure only by "blocking" but must instead guide liquid transport for "decompression". Learning from the water resistance of water strider legs and the drag reduction of shark skin, we present a continuous integrated system to obtain an ultrastable super-hydrophobic surface with a highly ordered scaly structure via a liquid flow-induced alignment method for lossless unidirectional liquid transport. The nonwetting scaly structure can both buffer liquid pressure and drive droplet motion to further reduce the vertical pressure of the liquid. Moreover, droplets can be manipulated unidirectionally using a voice. This work could aid in manufacturing scalable anisotropic micro-nanostructure surfaces, which inspires efforts in realizing lossless continuous liquid control on demand and related microfluidic applications.

Controllable Fabrication of Durable, Underliquid Superlyophobic Surfaces Based on the Lyophilic-Lyophobic Balance

Surfaces possessing desirable underliquid special wettability, particularly underliquid dual superlyophobicity, have a high potential for extensive applications. However, there is still a lack of controllable preparation strategies to regulate the underliquid wettability via balancing the underliquid lyophilicity-lyophobicity. Herein, we develop a nanocomposite coating system comprising silica nanoparticles (NPs), glycerol propoxylate triglycidyl ether (GPTE), and fluorinated alkyl silane (FAS) to obtain controllable underliquid special wettability surfaces. FAS is the vital factor in guiding the preparation of the surface coating with expected underliquid superwettability. Increasing the FAS content results in a tendency toward underwater superoleophobicity/underoil hydrophilicity to underwater oleophilicity/underoil superhydrophobicity. Significantly, the underliquid dual superlyophobic surface can be achieved when an appropriate FAS content is located. After the coating treatment, the fabric exhibits superamphiphilicity in air and superlyophobicity in liquid (i.e., exhibiting both underwater superoleophobicity and underoil superhydrophobicity). The coating also exhibits an adaptable antioil fouling ability and high durability against harsh environments. Furthermore, oil/water separation based on the underliquid dual superlyophobicity of coated fabrics is successfully demonstrated. Our work proposes a new fabrication principle for the design of underliquid special wettability surfaces and offers broad applications, such as switchable oil/water separation, antibiofouling, liquid manipulation, and smart textiles.

Biomimetic hydrophobic plastic foams with aligned channels for rapid oil absorption

Although many oil absorption materials have been developed, it still remains a great challenge to achieve rapid absorption and efficient recovery. Over the past decade, research has focused on the development of freeze casting technology using water as a solvent. The materials prepared by this method have poor water resistance and are difficult to apply to oil absorption in aqueous environments. Here, an organic solvent freeze casting strategy is proposed to fabricate ultralight hydrophobic plastic foams with aligned channel structures. Through microscopy in situ observation, we revealed the growth morphology of ice crystals during directional freezing process. Moreover, aligned porous foams with various channel sizes are fabricated by regulating the cooling rate. We found that organic solvent-assisted freeze casting can enhance the hydrophobicity of the matrix material. These aligned porous foams exhibit excellent liquid absorption performance, with high absorption speed and large absorption capacity over a wide viscosity range. This approach has general applicability and can be used to tailor a wide variety of engineering plastic-based aligned porous foams, as long as they can dissolve in organic solvents.

Gradient monolayered porous membrane for liquid manipulation: from fabrication to application

The controlled transport of liquid on a smart material surface has important applications in the fields of microreactors, mass and heat transfer, water collection, microfluidic devices and so on. Porous membranes with special wettability have attracted extensive attention due to their unique unidirectional transport behavior, that is, liquid can easily penetrate in one direction while reverse transport is prevented, which shows great potential in functional textiles, fog collection, oil/water separation, sensors, etc. However, many porous membranes are synthesized from multilayer structural materials with poor mechanical properties and are currently prone to delamination, which limits their stability. While a monolayered porous membrane, especially for gradient structure, is an efficient, stable and durable material owing to its good durability and difficult stratification. Therefore, it is of great significance to fabricate a monolayered porous membrane for controllable liquid manipulation. In this minireview, we briefly introduce the classification and fabrication of typical monolayered porous membranes. And the applications of monolayered porous membranes in unidirectional penetration, selective separation and intelligent response are further emphasized and discussed. Finally, the controllable preparation and potential applications of porous membranes are featured and their prospects discussed on the basis of their current development.

Biodegradable, biomimetic, and nanonet-engineered membranes enable high-flux and highly-efficient oil/water separation

Porous membranes with fascinating super-wettable surface and tunable porous architecture for oil-water separation have been developed rapidly, however, the serious secondary marine pollution caused by the non-degradable defectiveness of membranes themselves is still a thorny problem. Herein, we create an eco-friendly membrane with biomimetic cobweb-like nanostructure via assembling two-dimensional bacterial cellulose nanonets on the starch nanofibrous membrane on a large scale. The obtained novel composite membranes exhibit integrated properties of sub-micron pore size, ultrahigh porosity, superhydrophilicity, and underwater superoleophobicity, stemming from the synergistic effect of the hydrated nanonet-skin-layer and porous starch matrix. By virtue of the narrow-distributed sub-micron pores, ultrahigh porosity, and ultrathin thickness, the resulting membrane shows outstanding performance of excellent separation efficiency (up to 99.996%), high percolation flux (maximum of 15968 L m^-2 h^-1), well surpassing the conventional microfiltration membranes. More significantly, with the advantage of biodegradability and anti-oil-fouling property, the membrane could serve as the robust platform for long-term wastewater remediation.

Biomimetic on-chip filtration enabled by direct micro-3D printing on membrane

Membrane-on-chip is of growing interest in a wide variety of high-throughput environmental and water research. Advances in membrane technology continuously provide novel materials and multi-functional structures. Yet, the incorporation of membrane into microfluidic devices remains challenging, thus limiting its versatile utilization. Herein, via micro-stereolithography 3D printing, we propose and fabricate a "fish gill" structure-integrated on-chip membrane device, which has the self-sealing attribute at structure-membrane interface without extra assembling. As a demonstration, metallic micromesh and polymeric membrane can also be easily embedded in 3D printed on-chip device to achieve anti-fouling and anti-clogging functionality for wastewater filtration. As evidenced from in-situ visualization of structure-fluid-foulant interactions during filtration process, the proposed approach successfully adopts the fish feeding mechanism, being able to "ricochet" foulant particles or droplets through hydrodynamic manipulation. When benchmarked with two common wastewater treatment scenarios, such as plastic micro-particles and emulsified oil droplets, our biomimetic filtration devices exhibit 2 ~ 3 times longer durability for high-flux filtration than devices with commercial membrane. This proposed 3D printing-on-membrane approach, elegantly bridging the fields of microfluidics and membrane science, is instrumental to many other applications in energy, sensing, analytical chemistry and biomedical engineering.

Bioinspired Superhydrophobic/Superhydrophilic Janus Copper Foam for On-Demand Oil/Water Separation

Superwettable Janus membranes with unique interfacial characteristics have versatile applications in oil/water separation, microfluid transportation, and membrane distillation. However, it remains a significant challenge to simply fabricate three-dimensional (3D) metallic foams with Janus superwettability using a facile and environment-friendly method. In this study, a novel method is present to construct a Janus copper foam (CF) by combining superhydrophobicity and superhydrophilicity into CF. Based on gravity, the water in the light oil (LO)/water mixture can be transported from the superhydrophilic (SHL) side to the superhydrophobic (SHB) side, while the heavy oil (HO) in the HO/water/mixture can be transported from the SHB side to the SHL side. Therefore, cylindrical Janus oil/water separation devices with superior separation efficiency and excellent repeatability can achieve on-demand oil/water separation effortlessly. This design and fabrication method offers a novel avenue for the preparation of Janus interface materials for practical applications in liquid transportation, sensor devices, energy materials, and oil spills.

Switchable smart porous surface for controllable liquid transportation

Controllable liquid transportation through a smart porous membrane is realized by manipulating the surface wetting properties and external stimuli, and has been intensively studied. However, the liquid transportation, e.g., permeation and moving process, at the interface is generally uninterrupted, i.e., the opening and closing of the interface is irreversible. Herein, we present a new strategy to achieve magnetic adaptive switchable surfaces, i.e., liquid-infused micro-nanostructured porous composite film surfaces, for controllable liquid transportation, via modulation of the magnetic field. The liquid transportation process can be interrupted and restarted on the porous composite film because its pore structure can be quickly closed and opened owing to the adaptive morphological transformation of the magnetic liquid with a varying magnetic field. That is, the liquid permeation process occurs due to the open pore structure of the composite film when the external magnetic field is added, while the permeation process can be interrupted owing to the self-repairing closure of the pore when the magnetic field is removed, and the moving process can be achieved. Thus a magnetic field induced switchable porous composite film can serve as a valve to control liquid permeation based transportation, which opens new avenues for artificial liquid gating devices for flow, smart separation, and droplet microfluidics.

Bioinspired Materials for Energy Storage

Nature offers a variety of interesting structures and intriguing functions for researchers to be learnt for advanced materials innovations. Recently, bioinspired materials have received intensive attention in energy storage applications. Inspired by various natural species, many new configurations and components of energy storage devices, such as rechargeable batteries and supercapacitors, have been designed and innovated. The bioinspired designs on energy devices, such as electrodes and electrolytes, have brought about excellent physical, chemical, and mechanical properties compared to the counterparts at their conventional forms. In this review, the design principles for bioinspired materials ranging from structures, synthesis, and functionalization to multi-scale ordering and device integration are first discussed, and then a brief summary is given on the recent progress on bioinspired materials for energy storage systems, particularly the widely studied rechargeable batteries and supercapacitors. Finally, a critical review on the current challenges and brief perspective on the future research focuses are proposed. It is expected that this review can offer some insights into the smart energy storage system design by learning from nature.

Novel Ti3C2Tx MXene wrapped wood sponges for fast cleanup of crude oil spills by outstanding Joule heating and photothermal effect

Remediation of crude oil spills is a great challenge owing to the poor mobility and high viscosity of crude oil. Herein, a porous polydimethylsiloxane@wood sponge/MXene (PDMS@WSM) with outstanding compressibility and hydrophobic/lipophilic ability was demonstrated as crude oil absorbent. The surface temperature of PDMS@WSM could quickly rise to 80 °C with a working voltage of 4 V and to 66 °C under simulated sunlight irradiation of 1.5 KW m^-2, respectively. Due to the excellent Joule heating and photothermal conversion effect, the PDMS@WSM displayed maximum adsorption capacity of 11.2×10⁵ g m^-3 within 6 min. The PDMS@WSM showed preferable reusability and cycle stability because of its brilliant compressibility. Moreover, the oil-collecting device based on PDMS@WSM could continuously collect crude oil spills, achieving an active collection of 25 mL crude oil within 150 s. Therefore, the porous PDMS@WSM absorbent exhibited great potential for crude oil spills remediation, energy regulation, and desalination of hypersaline water.

Biomimetic Aligned Micro-/Nanofibrous Composite Membranes with Ultrafast Water Transport and Evaporation for Efficient Indoor Humidification

Humidifying membranes with ultrafast water transport and evaporation play a vital role in indoor humidification that improves personal comfort and industrial productivity in daily life. However, commercial nonwoven (NW) humidifying membranes show mediocre humidification capability owing to limited wicking capacity, low water absorption, and relatively less water evaporation. Herein, we report a biomimetic micro-/nanofibrous composite membrane with a highly aligned fibrous structure using a humidity-induced electrospinning technique for high-efficiency indoor humidification. Surface wettability and roughness are also tailored to achieve a high degree of superhydrophilicity by embedding hydrophilic silicon dioxide nanoparticles (SiO₂ NPs) into the fiber matrix. The synergistic effect of the highly aligned fibrous structure and surface wettability endows composite membranes with ultrafast water transport and evaporation. Strikingly, the composite membrane exhibits an outstanding wicking height of 19.5 cm, a superior water absorption of 497.7%, a fast evaporation rate of 0.34 mL h^-1, and a relatively low air pressure drop of 14.4 Pa, thereby achieving a remarkable humidification capacity of 514 mL h^-1 (57% higher than the commercial NW humidifying membrane). The successful synthesis of this biomimetic micro-/nanofibrous composite membrane provides new insights into the development of micro-/nanofibrous humidifying membranes for personal health and comfort as well as industrial production.

Fabrication of photo-Fenton self-cleaning PVDF composite membrane for highly efficient oil-in-water emulsion separation

The anti-fouling performance of membranes is an important performance in the separation of oil/water.

Formulating Multiphase Medium Anti-wetting States in an Air-Water-Oil System: Engineering Defects for Interface Chemical Evolutions

Studies which regulate macroscopic wetting states on determined surfaces in multiphase media are of far-reaching significance but are still in the preliminary stage. Herein, inspired by the wettability subassembly of fish scales, Namib desert beetle shell, and lotus leaf upper side, interfaces in the air-water-oil system are programmed by defect engineering to tailor the anti-wetting evolution from double to triple liquid repellency states. By controlling the visible light irradiation and plasma treatment, surface oxygen vacancies on Cu_xO@TiO₂ nanowires (NWs) can be healed or reconstructed. The original membrane or the membrane after plasma treatment possesses abundant surface oxygen vacancies, and the homogeneous hydrophilic membrane shows only double anti-wetting states in the water-oil system. By the unsaturated visible light irradiation time, the surface oxygen vacancy partially healed, the heterogeneous hydrophilic-hydrophobic components occupied the membrane surface, and the anti-wetting state finally changed from double to triple in the air-water-oil system. After the illumination time reaches saturation, it promotes the healing of all surface oxygen vacancies, and the membrane surface only contains uniform hydrophobic components and only maintains double anti-wetting state in the air-oil system. The mechanism of the triple anti-wetting state on a heterogeneous surface is expounded by establishing a wetting model. The wetting state and the adhesion state of the Cu_xO@TiO₂ NW membrane show regional specificity by controlling the illumination time and region. The underwater oil droplets exhibit the "non-adhesive" and "adhesive" state in a region with unsaturated irradiation time or in an unirradiated region, respectively. Underwater oil droplet manipulation can be accomplished easily based on switchable wettability and adhesion. Current studies reveal that defect engineering can be extended to anti-wetting evolution in the air-water-oil system. Constructing an anti-wetting interface by heterogeneous components provides reference for designing the novel anti-wetting interface.

A dual-functional layer modified GO@SiO2 membrane with excellent anti-fouling performance for continuous separation of oil-in-water emulsion

As the most significant target of membrane separation, the inadequacy of permeability and anti-fouling frequently constrain the application of the membrane in actual oily wastewater. Herein, a novel concept of membrane surface construction was proposed to mitigate this intractable problem, using SiO₂ as the support layer and graphene oxide (GO) as the isolation layer. The best co-localization proportion of the support layer (56 mg/L) and isolation layer (3.5 mg/L) was determined by the separation performance of the modified membranes for the simulated emulsion. The thin GO layer could effectively prevent contaminants from entering the membrane pores without affecting its roughness. Based on the synergistic action of the isolation layer and support layer, the GO@SiO₂ membrane could well implement emulsion purification with a stable permeability (654.11 LMHB) and high separation efficiency (99.41%). The superior anti-fouling performance of the membrane ensures its long-term cycling stability, with the permeability recovery rate of 89.75% (low-density oil) and 90.41% (high-density oil) after 10 repeated cycles. The storage stability also indirectly increases its value in practical applications. More importantly, the GO@SiO₂ membrane also shows great potential for industrial emulsion treatment with excellent purification and cycling stability (permeability recovery rate of 84.01%).

Biomimetic microcavity interfaces for a label-free capture of pathogens in the fluid bloodstream by vortical crossflow filtration

Bacterial sepsis is a lethal disease triggered by microbial pathogens. The blood pathogen load is a major contributor to both disease severity and mortality in patients with sepsis blood. Therefore, it is crucial to reduce the load of pathogens, in particular the drug-resistant pathogens. In this work, inspired by the crossflow filtration mechanism in suspension-feeding fish, we developed a biomimetic microcavity interface to mimic a porous gill-raker surface as a blood-cleansing dialyzer for sepsis therapy, which can rapidly, safely and efficiently clear bacteria from the fluidic blood. The microcavity interface consists of microcavity arrays, the innerface of which contains nanowire forests. By precisely controlling the pore size of the microcavity and directing the axial travel of the fluid, the bacteria can be isolated from the whole blood without disturbing any blood components or blocking the blood cell transportation. In addition, the three-dimensional nanowire forests assist in the formation of vortices with reduced blood flow velocity and increased resistance to bacterial deposition in situ. Functional modification is not required to recognize the bacteria specifically in our designed dialyzer. Moreover, the microcavity interface clears over 95% bacteria from a fluid blood sample without inducing protein adsorption or complement and platelet activation when contacting the fluid blood. The study supports this biomimetic microcavity interface to be a promising extracorporeal blood-cleansing device in clinical settings.

Direct recovery of spilled oil using hierarchically porous oil scoop with capillary-induced anti-oil-fouling

The pitcher plant has evolved its hierarchically grooved peristome to enhance a water-based slippery system for capturing insects with oil-covered footpads. Based on this, we proposed a hierarchically porous oil scoop (HPOS) with capillary-induced oil peel-off ability for repeatable spilled oil recovery. As the HPOS scoops oil-water mixture, water passes through the hole while the oil is confined within a curved geometry. The filter in HPOS has three levels of porous structures; (1) 3D-printed mesh structure with sub-millimeter scale hole to filter out oil from an oil-water mixture, (2) internal micropore in fibers enhancing capillarity and water transport, (3) O₂ plasma-induced high-aspect-ratio nanopillar structures imposing anti-oil-fouling property with capillary-induced oil peeling. As the oil-contaminated HPOS makes contact with water, water meniscus rises and peels off the oil immediately at the air-water interface. The oil-peel-off ability of the HPOS would prevent pores from clogging by oils for reuse. The study demonstrated that the HPOS recovers highly viscous oil (up to 5000 mm²·s^-1) with a high recovery rate (>95%), leaving the filtered water with low oil content (<10 ppm), which satisfies the discharge criterion of 15 ppm.

Artificial Leaf for Switchable Droplet Manipulation

Droplet manipulation plays an important role in scientific research, daily life, and practical production such as biological and chemical analysis. Inspired by the structure and function of three typical leaf veins, the bionic texture was replicated by the template method, and the artificial leaf was selectively treated by nanoparticles to obtain a quasi-three-dimensional hybrid superhydrophobic-hydrophilic surface. When the droplet touches the surface of the leaf, it will be attracted to the bottom of the main vein from different directions even in horizontal conditions due to the Laplace pressure gradient and energy gradient. The simulation analysis demonstrates that the reason for directional transportation is the energy gradient of the droplets on the different levels of veins, including the thin veins, lateral veins, and main vein. Meanwhile, the experimental result of water collection also showed an outstanding directional transportation effect and excellent water collection efficiency. In addition, when the sample is tilted upside down, the droplet will flow back to the main vein along the lateral vein and then flow down the main vein, showing a good droplet pumping effect. Therefore, the directional and polydirectional transportation of droplets on the same sample is successfully realized, and the conversion between executing single and multiple tasks simultaneously can be realized only by upright and inverted samples. This work provided a new strategy for directional and polydirectional water manipulation, water collection, directional drainage, and microfluidic devices.

Dual-functional membrane decorated with flower-like metal-organic frameworks for highly efficient removal of insoluble emulsified oils and soluble dyes

High-performance membranes for simultaneously removing insoluble emulsified oils and soluble organic dyes are in urgently demand for industrial wastewater treatment, but are strictly limited by the single-function and serious fouling problem. Herein, a dual-functional membrane with excellent antifouling ability for efficiently dye/oil/water emulsion separation has been fabricated by growing flower-like metal-organic frameworks (MIL-53-OH) on polyacrylonitrile/polyethyleneimine membrane for the first time. The synergistic effect of the hierarchical flower-like structure and superhydrophilic compositions with high hydration ability endows the obtained membrane with a stable and ultra-strong oil-repelling hydration layer, thus imparting the membrane formidable oil resistance and exceptional oil/water emulsion separation performance (permeate flux>4000 L m^-2 h^-1). What's more, the superhydrophilic compositions render the membrane an excellent dye remove capacity by electrostatic forces and hydrogen bonding. The membrane rejections for dyes and emulsified oils are above 99%, and the dyes and oils on the used membrane can be easily washed away with methanol and water, respectively, confirming that the membrane has desirable recyclability. Besides, the membrane possesses excellent mechanical performance and outstanding acid and alkali resistance, indicating that the membrane is a promising candidate for removing insoluble emulsified oils and soluble dyes.

One-Step Versatile Fabrication of Superhydrophilic Filters for the Efficient Purification of Oily Water

As industrial oily wastewater can seriously damage ecosystems, the use of filtration technology with functional filters has emerged as an effective approach for purifying oily wastewater and protecting the environment. Although several methods for preparing functional filters with specific wettability have been reported, most methods are complicated, expensive, and time-consuming. Furthermore, these methods are only applicable to specific substrates, which hinder their practical applications. Here, a simple and versatile method for the fabrication of a superhydrophilic filter on any substrate using a one-step dipping process is reported. The method is easily scaled-up to fabricate large-area superhydrophilic filters; moreover, mass production is possible using a roll-to-roll process. The resulting filter is durable, stable, and, due to its stable hydrophilic layer, shows no deterioration in wetting behavior; it also exhibits self-cleaning properties. Based on its selective wetting characteristics, oil/water mixtures and oil-in-water emulsions stabilized by surfactants can be purified in a highly efficient manner. Importantly, owing to its self-cleaning properties, the filter can be reused after simply immersing and washing in water. This easy, cost-effective, fast, and versatile method for fabricating superhydrophilic filters can be practically applied in industries that need to purify oily water.

Green Method for Fabrication of an Underwater Superoleophobic Phosphor-Copper Mesh and Transportation of Oily Liquids

Sea cucumber-shaped Cu₂O nanostructures are constructed on a phosphor-copper mesh by employing a one-step immersion process accomplished in distilled water without introducing any additional reagent. The phosphor-copper mesh with a Cu₂O structure thereon exhibits significant hydrophilicity and induces a large superoleophobic force at the oil/water interface. The method used for preparing the Cu₂O nanostructures represents an inexpensive, fast, and environmentally friendly approach, along with satisfying the requirements of large-scale preparation. It is found that the pickling degree of the phosphor-copper mesh during surface cleaning plays a major role in the oxidation process of the surface for the growth of Cu₂O nanostructures. Nanostructures with different morphologies can be achieved by accurately controlling the surface pickling degree. Interestingly, an underwater superoleophobic "pipe" developed using the as-prepared phosphor-copper mesh can realize gravity (buoyancy)-driven oily liquid transport in an aqueous environment, with no associated contamination by the oil. This study provides a simple method to realize surface-functionalization and demonstrates a new route for achieving liquid transportation without external energy and would help to design smart aquatic devices for diverse liquid transport thereby, enabling oil handling and oil spill cleanup.

Bioinspired Hybrid Micro/Nanostructure Composited Membrane with Intensified Mass Transfer and Antifouling for High Saline Water Membrane Distillation

Membrane distillation (MD) holds great promise for high-saline solution treatment, but it is typically impeded by the trade-off between the high mass transfer and antifouling properties of the membrane. Herein, a new MD utilized membrane with bioinspired micro/nanostructure (lotus leaf and fish gill) was constructed on commercial PP membrane, which can simultaneously enhance the permeation flux and antifouling in the hypersaline MD operation. On the basis of the classic nucleation theory and hydrodynamics simulation, the nanoscale structure can intensify the interfacial nanoscale turbulent flow and hinder the crystal deposition, which works like the fish gill. In addition, the optimized nanoscale feature size renders the membrane with the heterogeneous nucleation barrier very similar to the homogeneous system, which works like the lotus leaf and hinders the induced nucleation effectively. The microscale structure as the supporting platform of nanostructure can additionally enlarge the effective evaporative surface with superior hydrophobicity and then promote the permeation transfer through the membrane. The hybrid micro/nanostructures render the fabricated membrane with excellent high-permeation flux and significantly prolonged fouling induction time, which sheds light on a new approach for the development of ideal MD utilized membrane.

Molecular Understanding and Design of Porous Polyurethane Hydrogels with Ultralow-Oil-Adhesion for Oil-Water Separation

Materials with opposite affinities toward oil and water have been extensively used to coat porous substrates for oil-water separation, but the applications of these materials have been limited by the need for complex coating processes as well as the short-term adherence of these materials onto different substrates under extreme conditions. As reported herein, the robust porous polyurethane hydrogel has been theoretically and structurally designed with ultralow-oil-adhesion properties which is free stand without depending on additional substrates. The combination of superhydrophilic properties along with the underwater superoleophobic behavior of this porous hydrogel allows gravity driven separations of oil-water mixtures, and its antiadhesion performance toward oil prevents undesirable oily fouling. The underwater superoleophobic properties were also illustrated by molecular dynamics simulation to understand the resisting effect of hydrated layers. The as-prepared porous hydrogel shows ultrahigh oil-water separation efficiencies of 99.9% for various oil-water mixtures, ranging from those containing viscous oils (pump oil and peanut oil) to organic solvents (n-hexane, n-hexadecane, and toluene). In addition, this hydrogel is durable even with exposure to various harsh conditions including acidic and basic media (pH 0-14) as well as exposure to mechanical abrasion. We believe that the combination of facile preparation, substrate independence, gravity driven separation, antifouling properties, high durability, as well as the outstanding separation flux and efficiency of this robust porous hydrogel will help to advance the design and application of materials in oil-water separation fields.