Self-Assembly of Hierarchical DNA Nanotube Architectures with Well-Defined Geometries

Hierarchical assembly and modeling of DNA nanotube networks using Y-shaped DNA origami seeds

DNA nanotechnology offers many means to synthesize custom nanostructured materials from the ground up in a hierarchical fashion. While the assembly of DNA nanostructures from small (nanometer-scale) monomeric components has been studied extensively, how the hierarchical assembly of rigid or semi-flexible units produces multi-micron scale structures is less understood. Here we demonstrate a mechanism for assembling micron-scale semi-flexible DNA nanotubes into extended structures. These nanotubes assemble from nanometer-scale tile monomers into materials via heterogeneous nucleation from rigid, Y-shaped DNA origami seeds to form Y-seeded nanotube architectures. These structures then assemble into networks via nanotube end-to-end joining. We measure the kinetics of network growth and find that the assembly of networks can be approximated by a model of hierarchical assembly that assumes a single joining rate between DNA nanotube ends. Because the number of nucleation sites on Y-seeds and their spatial arrangement can be systematically varied by design, this hierarchical assembly process could be used to form a wide variety of networks and to understand the assembly mechanisms that lead to different types of material architectures at length scales of tens to hundreds of microns.

Nanocrystal Assemblies: Current Advances and Open Problems

We explore the potential of nanocrystals (a term used equivalently to nanoparticles) as building blocks for nanomaterials, and the current advances and open challenges for fundamental science developments and applications. Nanocrystal assemblies are inherently multiscale, and the generation of revolutionary material properties requires a precise understanding of the relationship between structure and function, the former being determined by classical effects and the latter often by quantum effects. With an emphasis on theory and computation, we discuss challenges that hamper current assembly strategies and to what extent nanocrystal assemblies represent thermodynamic equilibrium or kinetically trapped metastable states. We also examine dynamic effects and optimization of assembly protocols. Finally, we discuss promising material functions and examples of their realization with nanocrystal assemblies.

Building Large DNA Bundles via Controlled Hierarchical Assembly of DNA Tubes

Structural DNA nanotechnology is capable of fabricating designer nanoscale artificial architectures. Developing simple and yet versatile assembly methods to construct large DNA structures of defined spatial features and dynamic capabilities has remained challenging. Herein, we designed a molecular assembly system where DNA tiles can assemble into tubes and then into large one-dimensional DNA bundles following a hierarchical pathway. A cohesive link was incorporated into the tile to induce intertube binding for the formation of DNA bundles. DNA bundles with length of dozens of micrometers and width of hundreds of nanometers were produced, whose assembly was revealed to be collectively determined by cationic strength and linker designs (binding strength, spacer length, linker position, etc.). Furthermore, multicomponent DNA bundles with programmable spatial features and compositions were realized by using various distinct tile designs. Lastly, we implemented dynamic capability into large DNA bundles to realize reversible reconfigurations among tile, tube, and bundles following specific molecular stimulations. We envision this assembly strategy can enrich the toolbox of DNA nanotechnology for rational design of large-size DNA materials of defined features and properties that may be applied to a variety of fields in materials science, synthetic biology, biomedical science, and beyond.

Recent Advances in DNA Origami-Engineered Nanomaterials and Applications

DNA nanotechnology is a unique field, where physics, chemistry, biology, mathematics, engineering, and materials science can elegantly converge. Since the original proposal of Nadrian Seeman, significant advances have been achieved in the past four decades. During this glory time, the DNA origami technique developed by Paul Rothemund further pushed the field forward with a vigorous momentum, fostering a plethora of concepts, models, methodologies, and applications that were not thought of before. This review focuses on the recent progress in DNA origami-engineered nanomaterials in the past five years, outlining the exciting achievements as well as the unexplored research avenues. We believe that the spirit and assets that Seeman left for scientists will continue to bring interdisciplinary innovations and useful applications to this field in the next decade.

DNA-Based Nanomaterials as Drug Delivery Platforms for Increasing the Effect of Drugs in Tumors

DNA nanotechnology has significantly advanced and might be used in biomedical applications, drug delivery, and cancer treatment during the past few decades. DNA nanomaterials are widely used in biomedical research involving biosensing, bioimaging, and drug delivery since they are remarkably addressable and biocompatible. Gradually, modified nucleic acids have begun to be employed to construct multifunctional DNA nanostructures with a variety of architectural designs. Aptamers are single-stranded nucleic acids (both DNAs and RNAs) capable of self-pairing to acquire secondary structure and of specifically binding with the target. Diagnosis and tumor therapy are prospective fields in which aptamers can be applied. Many DNA nanomaterials with three-dimensional structures have been studied as drug delivery systems for different anticancer medications or gene therapy agents. Different chemical alterations can be employed to construct a wide range of modified DNA nanostructures. Chemically altered DNA-based nanomaterials are useful for drug delivery because of their improved stability and inclusion of functional groups. In this work, the most common oligonucleotide nanomaterials were reviewed as modern drug delivery systems in tumor cells.

Regulation of 2D DNA Nanostructures by the Coupling of Intrinsic Tile Curvature and Arm Twist

The overwinding and underwinding of DNA duplexes between junctions have been used in designing left- and right-handed DNA origami nanostructures, respectively. For DNA tubes obtained from self-assembled tiles, only a theoretical approach of the intrinsic curvature of the tiles has been previously used to explain their formation. Details regarding the quantitative and structural descriptions of the tile's intrinsic curvature in DNA nanostructures have so far never been addressed. In this work, we designed three types of tile cores built around a circular scaffold using three- and four-branched junctions. Joining the tile cores with arms having two kinds of inter-tile distances, an odd and an even number of DNA half-turns, tended to form planar 2D lattices and tubes, respectively. Streptavidin bound to biotin was used as a labeling technique to characterize the inside and outside surfaces of the tubes and thereby the tile conformation of dihedrals with addressable faces. DNA tubes with either right- or left-handed chirality were obtained by the coupling of the intrinsic curvature of the tiles with the arm twist. We were able to assign the chiral indices (n,m) to a tube with its structure resolved by AFM at the single-tile level and therefore to estimate the global curvature of the tube (or its component tile) using a regular polygon model that approximated its transverse section. A deeper understanding of the integrated actions of different types of twisting forces on DNA tubes will be extremely helpful in engineering more elaborate DNA nanostructures in the future.

Programmable molecular transport achieved by engineering protein motors to move on DNA nanotubes

Intracellular transport is the basis of microscale logistics within cells and is powered by biomolecular motors. Mimicking transport for in vitro applications has been widely studied; however, the inflexibility in track design and control has hindered practical applications. Here, we developed protein-based motors that move on DNA nanotubes by combining a biomolecular motor dynein and DNA binding proteins. The new motors and DNA-based nanoarchitectures enabled us to arrange the binding sites on the track, locally control the direction of movement, and achieve multiplexed cargo transport by different motors. The integration of these technologies realized microscale cargo sorters and integrators that automatically transport molecules as programmed in DNA sequences on a branched DNA nanotube. Our system should provide a versatile, controllable platform for future applications.

Nanofluorescence Probes to Detect miR-192/Integrin Alpha 1 and Their Correlations with Retinoblastoma

We developed a novel nanostructure DNA probe for the in situ detection of ITGA1 and miR-192 in retinoblastoma (RB) and to study the correlation between ITGA1 and miR-192 expression and RB development. ITGA1 and miR-192 nanostructure DNA probes were carried by silica particles and coated by dioleoyl-trimethy-lammonium-propane, which enhances their organizational compatibility and infiltration capacity. This probe has stable physicochemical properties and high specificity and sensitivity to detect ITGA1 and miR-192 in situ both in RB cell lines and RB tissues. Using ITGA1 and miR-192 nanostructure DNA probes in RB tissue and cell lines, we found that the expression of ITAG1 drastically increased, but to the contrary, miR-192 was not expressed. After transfection, ITGA1 and miR-192 were overexpressed or silenced in RB116 cells, and we found that ITGA1 could effectively increase the activity and invasion of this RB cell line and reduce its apoptosis level, while miR-192 antagonized this tumor-promoting effect. Therefore, miR-192 can be used as an early biomarker of RB, and ITGA1 may be a new prognostic marker and therapeutic target for the treatment of RB.

Growth and site-specific organization of micron-scale biomolecular devices on living mammalian cells

Mesoscale molecular assemblies on the cell surface, such as cilia and filopodia, integrate information, control transport and amplify signals. Designer cell-surface assemblies could control these cellular functions. Such assemblies could be constructed from synthetic components ex vivo, making it possible to form such structures using modern nanoscale self-assembly and fabrication techniques, and then oriented on the cell surface. Here we integrate synthetic devices, micron-scale DNA nanotubes, with mammalian cells by anchoring them by their ends to specific cell surface receptors. These filaments can measure shear stresses between 0-2 dyn/cm², a regime important for cell signaling. Nanotubes can also grow while anchored to cells, thus acting as dynamic cell components. This approach to cell surface engineering, in which synthetic biomolecular assemblies are organized with existing cellular architecture, could make it possible to build new types of sensors, machines and scaffolds that can interface with, control and measure properties of cells.

Mesoscale molecular assemblies on the cell surface integrate information and amplify signals. Here the authors integrate DNA nanotubes in a controlled manner with mammalian cells to act as sheer stress meters.

Dynamic self-assembly of compartmentalized DNA nanotubes

Bottom-up synthetic biology aims to engineer artificial cells capable of responsive behaviors by using a minimal set of molecular components. An important challenge toward this goal is the development of programmable biomaterials that can provide active spatial organization in cell-sized compartments. Here, we demonstrate the dynamic self-assembly of nucleic acid (NA) nanotubes inside water-in-oil droplets. We develop methods to encapsulate and assemble different types of DNA nanotubes from programmable DNA monomers, and demonstrate temporal control of assembly via designed pathways of RNA production and degradation. We examine the dynamic response of encapsulated nanotube assembly and disassembly with the support of statistical analysis of droplet images. Our study provides a toolkit of methods and components to build increasingly complex and functional NA materials to mimic life-like functions in synthetic cells.

Two-Dimensional Molecular Network Built from Hierarchy Self-Assembly of Perylene Bisimide Derivatives

The structures of two-dimensional (2D) self-assembled molecular networks formed by a series of perylene bisimide (PBI) derivatives were investigated by scanning tunneling microscopy (STM). By introducing different functional groups to the PBI rings, we successfully built a different self-assembled molecular network on the liquid-solid interface. When the substituent is propanol, PBI is aligned in lines. When we introduced either an ester group or an amide group to the PBI compounds, they tended to form dimers and trimers. Especially, the PBI with the amide groups can form a 2D porous molecular network by hierarchy self-assembly. The 2D porous molecular network has a great potential to be the host molecule for the accommodation of a guest molecule, coronene (COR), and the structure of the 2D porous molecular network can be tuned by varying the concentration. The density functional theory calculations were also performed to disclose the mechanisms involved.

Regulating DNA Self-Assembly Dynamics with Controlled Nucleation

Controlling the nucleation step of a self-assembly system is essential for engineering structural complexity and dynamic behaviors. Here, we design a "frame-filling" model system that comprises one type of self-complementary DNA tile and a hosting DNA origami frame to investigate the inherent dynamics of three general nucleation modes in nucleated self-assembly: unseeded, facet, and seeded nucleation. Guided by kinetic simulation, which suggested an optimal temperature range to differentiate the individual nucleation modes, and complemented by single-molecule observations, the transition of tiles from a metastable, monomeric state to a stable, polymerized state through the three nucleation pathways was monitored by Mg²⁺-triggered kinetic measurements. The temperature-dependent kinetics for all three nucleation modes were correlated by a "nucleation-growth" model, which quantified the tendency of nucleation using an empirical nucleation number. Moreover, taking advantage of the temperature dependence of nucleation, tile assembly can be regulated externally by the hosting frame. An ultraviolet (UV)-responsive trigger was integrated into the frame to simultaneously control "when" and "where" nucleation started. Our results reveal the dynamic mechanisms of the distinct nucleation modes in DNA tile-based self-assembly and provide a general strategy for controlling the self-assembly process.

DNA origami-based microtubule analogue

A microtubule hollow structure is one type of cytoskeletons which directs a number of important cellular functions. When recapitulating biological events in a cell-free system, artificial frames are often required to execute similar cytoskeletal functions in synthetic systems. Here, I report a prototypical microtubular assembly using a DNA origami nanostructuring method. Through structural design at the molecular level, 32HB (helices bundle)-based DNA origami objects can form micrometers long tubular structures via shape-complementary side patterns engagement and head-to-tail blunt-end stacking. Multiple parameters have been investigated to gain optimized polymerization conditions. Conformational change with an open vs closed hinge is also included, rendering conformational changes for a dynamic assembly. When implementing further improved external regulation with DNA dynamics (DNA strand displacement reactions or using other switchable non-canonical DNA secondary structures) or chemical stimuli, the DNA origami-based microtubule analogue will have great potential to assemble and disassemble on purpose and conduct significantly complicated cytoskeletal tasks in vitro.

Feedback regulation of crystal growth by buffering monomer concentration

Crystallization is a ubiquitous means of self-assembly that can organize matter over length scales orders of magnitude larger than those of the monomer units. Yet crystallization is notoriously difficult to control because it is exquisitely sensitive to monomer concentration, which changes as monomers are depleted during growth. Living cells control crystallization using chemical reaction networks that offset depletion by synthesizing or activating monomers to regulate monomer concentration, stabilizing growth conditions even as depletion rates change, and thus reliably yielding desired products. Using DNA nanotubes as a model system, here we show that coupling a generic reversible bimolecular monomer buffering reaction to a crystallization process leads to reliable growth of large, uniformly sized crystals even when crystal growth rates change over time. Buffering could be applied broadly as a simple means to regulate and sustain batch crystallization and could facilitate the self-assembly of complex, hierarchical synthetic structures.

Reconfiguring DNA Nanotube Architectures via Selective Regulation of Terminating Structures

Molecular assemblies inside cells often undergo structural reconfiguration in response to stimuli to alter their function. Adaptive reconfiguration of cytoskeletal networks, for example, enables cellular shape change, movement, and cargo transport and plays a key role in driving complex processes such as division and differentiation. The cellular cytoskeleton is a self-assembling polymer network composed of simple filaments, so reconfiguration often occurs through the rearrangement of its component filaments' connectivities. DNA nanotubes have emerged as promising building blocks for constructing programmable synthetic analogs of cytoskeletal networks. Nucleating seeds can control when and where nanotubes grow, and capping structures can bind nanotube ends to stop growth. Such seeding and capping structures, collectively called termini, can organize nanotubes into larger architectures. However, these structures cannot be selectively activated or inactivated in response to specific stimuli to rearrange nanotube architectures, a key property of cytoskeletal networks. Here, we demonstrate how selective regulation of the binding affinity of DNA nanotube termini for DNA nanotube monomers or nanotube ends can direct the reconfiguration of nanotube architectures. Using DNA hybridization and strand displacement reactions that specifically activate or inactivate four orthogonal nanotube termini, we demonstrate that nanotube architectures can be reconfigured by selective addition or removal of distinct termini. Finally, we show how terminus activation could be a sensitive detector and amplifier of a DNA sequence signal. These results could enable the development of adaptive and multifunctional materials or diagnostic tools.

DNA Nunchucks: Nanoinstrumentation for Single-Molecule Measurement of Stiffness and Bending

Bending of double-stranded DNA (dsDNA) has important applications in biology and engineering, but measurement of DNA bend angles is notoriously difficult and rarely dynamic. Here we introduce a nanoscale instrument that makes dynamic measurement of the bend in short dsDNAs easy enough to be routine. The instrument works by embedding the ends of a dsDNA in stiff, fluorescently labeled DNA nanotubes, thereby mechanically magnifying their orientations. The DNA nanotubes are readily confined to a plane and imaged while freely diffusing. Single-molecule bend angles are rapidly and reliably extracted from the images by a neural network. We find that angular variance across a population increases with dsDNA length, as predicted by the worm-like chain model, although individual distributions can differ significantly from one another. For dsDNAs with phased A₆-tracts, we measure an intrinsic bend of 17 ± 1° per A₆-tract, consistent with other methods, and a length-dependent angular variance that indicates A₆-tracts are (80 ± 30)% stiffer than generic dsDNA.

DNA Nanostructure as an Efficient Drug Delivery Platform for Immunotherapy

Immunotherapy has received increasing attention due to its low potential side effects and high specificity. For instance, cancer immunotherapy has achieved great success. CpG is a well-known and commonly used immunotherapeutic and vaccine adjuvant, but it has the disadvantage of being unstable and low in efficacy and needs to be transported through an effective nanocarrier. With perfect structural programmability, permeability, and biocompatibility, DNA nanostructures are one of the most promising candidates to deliver immune components to realize immunotherapy. However, the instability and low capability of the payload of ordinary DNA assemblies limit the relevant applications. Consequently, DNA nanostructure with a firm structure, high drug payloads is highly desirable. In the paper, the latest progress of biostable, high-payload DNA nanoassemblies of various structures, including cage-like DNA nanostructure, DNA particles, DNA polypods, and DNA hydrogel, are reviewed. Cage-like DNA structures hold drug molecules firmly inside the structure and leave a large space within the cavity. These DNA nanostructures use their unique structure to carry abundant CpG, and their biocompatibility and size advantages to enter immune cells to achieve immunotherapy for various diseases. Part of the DNA nanostructures can also achieve more effective treatment in conjunction with other functional components such as aPD1, RNA, TLR ligands.

Bead-String-Shaped DNA Nanowires with Intrinsic Structural Advantages and Their Potential for Biomedical Applications

Due to high programmability and good biocompatibility, DNA has been recognized as a powerful building block for engineering of sophisticated nanostructures for different purposes. Herein, we present the first example of a bead-string-shaped DNA nanowire (BS-nanow) with long-range structural order for in vivo bioimaging and targeted drug delivery. BS-nanow is assembled from DNA tetrahedron units with precise nanometer-scale spatial control, capable of accommodating chemotherapeutic agents with high payload capacity (1204 binding sites) as well as possessing a 60-fold enhanced binding affinity for target cells. Confocal fluorescence imaging and in vivo experiments on CEM subcutaneous tumor-bearing mice show that specific bioimaging of living cells and even systemic delivery of drugs into internal tumor organs and tissues were accomplished, thereby achieving an efficient inhibition of tumor growth in the xenograft model without systemic toxicity. BS-nanow's show potential in vivo applications in accurate diagnosis and targeted therapy for human cancer.

Hierarchical self-assembly of 3D lattices from polydisperse anisometric colloids

Colloids are mainly divided into two types defined by size. Micron-scale colloids are widely used as model systems to study phase transitions, while nanoparticles have physicochemical properties unique to their size. Here we study a promising yet underexplored third type: anisometric colloids, which integrate micrometer and nanometer dimensions into the same particle. We show that our prototypical system of anisometric silver plates with a high polydispersity assemble, unexpectedly, into an ordered, three-dimensional lattice. Real-time imaging and interaction modeling elucidate the crucial role of anisometry, which directs hierarchical assembly into secondary building blocks-columns-which are sufficiently monodisperse for further ordering. Ionic strength and plate tip morphology control the shape of the columns, and therefore the final lattice structures (hexagonal versus honeycomb). Our joint experiment-modeling study demonstrates potentials of encoding unconventional assembly in anisometric colloids, which can likely introduce properties and phase behaviors inaccessible to micron- or nanometer-scale colloids.

Biomimetic DNA Nanotubes: Nanoscale Channel Design and Applications

Biomacromolecular nanotubes play important physiological roles in transmembrane ion/molecule channeling, intracellular transport, and inter-cellular communications. While genetically encoded protein nanotubes are prevalent in vivo, the in vitro construction of biomimetic DNA nanotubes has attracted intense interest with the rise of structural DNA nanotechnology. The abiotic use of DNA assembly provides a powerful bottom-up approach for the rational construction of complex materials with arbitrary size and shape at the nanoscale. More specifically, a typical DNA nanotube can be assembled either with parallel-aligned DNA duplexes or by closing DNA tile lattices. These artificial DNA nanotubes can be tailored and site-specifically modified to realize biomimetic functions including ionic or molecular channeling, bioreactors, drug delivery, and biomolecular sensing. In this Minireview, we aim to summarize recent advances in design strategies, including the characterization and applications of biomimetic DNA nanotubes.

Instant hydrogel formation of terpyridine-based complexes triggered by DNA via non-covalent interaction

Biomolecule-based hydrogels have potential use in a wide range of applications such as controlled drug release, tissue engineering, and biofabrication. Herein, driven by specific interactions between ds-DNA (double-stranded DNA) and Zn2+ based metal-complexes, we report that the use of DNA as cross-linkers can enhance interactions between self-assembling Zn2+ complexes containing terpyridine and sugar groups in the generation of bioinspired hydrogels from solutions or suspensions. The gelation process is fast and straightforward without tedious steps and happens at room temperature. Such a hydrogelation process of different Zn2+ complexes endows the visualized and selective DNA analogue discrimination. Several experiments suggest that the strong intercalation binding of Zn2+ complexes with ds-DNA results in the unzipping of ds-DNA into ss-DNA (single-stranded DNA), which further behave as linkers to enhance the intermolecular interactions of self-assembling Zn2+ complex molecules via coordination interactions. This work demonstrates an efficient and universal strategy to prepare hydrogels based on biomolecular recognition. Moreover, the DNA responsive behaviors of Zn2+ complexes are further compared with that of solutions and cells.

Triangulated Wireframe Structures Assembled Using Single-Stranded DNA Tiles

The field of structural DNA nanotechnology offers a wide range of design strategies with which to build structures with a desired aspect ratio, size, and shape. Compared with traditional close-packed DNA structures, triangulated wireframe structures require less material per surface or volume unit and improve the stability in biologically relevant conditions due to the reduced electrostatic repulsion. Herein, we expand the design space of the DNA single-stranded tile method to cover a range of anisotropic, finite, triangulated wireframe structures as well as a number of one-dimensional crystalline assemblies. These structures are composed of six-arm junctions with a single double helix as connecting edges that assemble in physiologically relevant salinities. For a reliable folding of the structures, single-stranded spacers 2-4 nucleotides long have to be introduced in the junction connecting neighboring arms. Coarse-grained molecular dynamics simulations using the oxDNA model suggests that the spacers prevent the stacking of DNA helices, thereby facilitating the assembly of planar geometries.

Self-assembly as a key player for materials nanoarchitectonics

The development of science and technology of advanced materials using nanoscale units can be conducted by a novel concept involving combination of nanotechnology methodology with various research disciplines, especially supramolecular chemistry. The novel concept is called 'nanoarchitectonics' where self-assembly processes are crucial in many cases involving a wide range of component materials. This review of self-assembly processes re-examines recent progress in materials nanoarchitectonics. It is composed of three main sections: (1) the first short section describes typical examples of self-assembly research to outline the matters discussed in this review; (2) the second section summarizes self-assemblies at interfaces from general viewpoints; and (3) the final section is focused on self-assembly processes at interfaces. The examples presented demonstrate the strikingly wide range of possibilities and future potential of self-assembly processes and their important contribution to materials nanoarchitectonics. The research examples described in this review cover variously structured objects including molecular machines, molecular receptors, molecular pliers, molecular rotors, nanoparticles, nanosheets, nanotubes, nanowires, nanoflakes, nanocubes, nanodisks, nanoring, block copolymers, hyperbranched polymers, supramolecular polymers, supramolecular gels, liquid crystals, Langmuir monolayers, Langmuir-Blodgett films, self-assembled monolayers, thin films, layer-by-layer structures, breath figure motif structures, two-dimensional molecular patterns, fullerene crystals, metal-organic frameworks, coordination polymers, coordination capsules, porous carbon spheres, mesoporous materials, polynuclear catalysts, DNA origamis, transmembrane channels, peptide conjugates, and vesicles, as well as functional materials for sensing, surface-enhanced Raman spectroscopy, photovoltaics, charge transport, excitation energy transfer, light-harvesting, photocatalysts, field effect transistors, logic gates, organic semiconductors, thin-film-based devices, drug delivery, cell culture, supramolecular differentiation, molecular recognition, molecular tuning, and hand-operating (hand-operated) nanotechnology.

T7 RNA polymerase non-specifically transcribes and induces disassembly of DNA nanostructures

The use of proteins that bind and catalyze reactions with DNA alongside DNA nanostructures has broadened the functionality of DNA devices. DNA binding proteins have been used to specifically pattern and tune structural properties of DNA nanostructures and polymerases have been employed to directly and indirectly drive structural changes in DNA structures and devices. Despite these advances, undesired and poorly understood interactions between DNA nanostructures and proteins that bind DNA continue to negatively affect the performance and stability of DNA devices used in conjunction with enzymes. A better understanding of these undesired interactions will enable the construction of robust DNA nanostructure-enzyme hybrid systems. Here, we investigate the undesired disassembly of DNA nanotubes in the presence of viral RNA polymerases (RNAPs) under conditions used for in vitro transcription. We show that nanotubes and individual nanotube monomers (tiles) are non-specifically transcribed by T7 RNAP, and that RNA transcripts produced during non-specific transcription disassemble the nanotubes. Disassembly requires a single-stranded overhang on the nanotube tiles where transcripts can bind and initiate disassembly through strand displacement, suggesting that single-stranded domains on other DNA nanostructures could cause unexpected interactions in the presence of viral RNA polymerases.

A review of the interfacial characteristics of polymer nanocomposites containing carbon nanotubes

This paper provides an overview of recent advances in research on the interfacial characteristics of carbon nanotube–polymer nanocomposites. The state of knowledge about the chemical functionalization of carbon nanotubes as well as the interaction at the interface between the carbon nanotube and the polymer matrix is presented. The primary focus of this paper is on identifying the fundamental relationship between nanocomposite properties and interfacial characteristics. The progress, remaining challenges, and future directions of research are discussed. The latest developments of both microscopy and scattering techniques are reviewed, and their respective strengths and limitations are briefly discussed. The main methods available for the chemical functionalization of carbon nanotubes are summarized, and particular interest is given to evaluation of their advantages and disadvantages. The critical issues related to the interaction at the interface are discussed, and the important techniques for improving the properties of carbon nanotube–polymer nanocomposites are introduced. Additionally, the mechanism responsible for the interfacial interaction at the molecular level is briefly described. Furthermore, the mechanical, electrical, and thermal properties of the nanocomposites are discussed separately, and their influencing factors are briefly introduced. Finally, the current challenges and opportunities for efficiently translating the remarkable properties of carbon nanotubes to polymer matrices are summarized in the hopes of facilitating the development of this emerging area. Potential topics of oncoming focus are highlighted, and several suggestions concerning future research needs are also presented.

The state of research on the characteristics at the interface in polymer nanocomposites is reviewed. Special emphasis is placed on the recent advances in the fundamental relationship between interfacial characteristics and nanocomposite properties.

Terminating DNA Tile Assembly with Nanostructured Caps

Precise control over the nucleation, growth, and termination of self-assembly processes is a fundamental tool for controlling product yield and assembly dynamics. Mechanisms for altering these processes programmatically could allow the use of simple components to self-assemble complex final products or to design processes allowing for dynamic assembly or reconfiguration. Here we use DNA tile self-assembly to develop general design principles for building complexes that can bind to a growing biomolecular assembly and terminate its growth by systematically characterizing how different DNA origami nanostructures interact with the growing ends of DNA tile nanotubes. We find that nanostructures that present binding interfaces for all of the binding sites on a growing facet can bind selectively to growing ends and stop growth when these interfaces are presented on either a rigid or floppy scaffold. In contrast, nucleation of nanotubes requires the presentation of binding sites in an arrangement that matches the shape of the structure's facet. As a result, it is possible to build nanostructures that can terminate the growth of existing nanotubes but cannot nucleate a new structure. The resulting design principles for constructing structures that direct nucleation and termination of the growth of one-dimensional nanostructures can also serve as a starting point for programmatically directing two- and three-dimensional crystallization processes using nanostructure design.

Fluorescence-coded DNA Nanostructure Probe System to Enable Discrimination of Tumor Heterogeneity via a Screening of Dual Intracellular microRNA Signatures in situ

Since the delivery kinetics of different cell types are different, the signal from the target cell is greatly affected by the noise signal of the diagnostic system. This is a major obstacle hindering the practical application of intracellular diagnostic systems, such as tumor heterogeneity. To address these issues, here we present a microRNA detection platform using fluorescence-encoded nanostructured DNA-based probes. The nanostructured DNA was designed to include molecular beacons for detecting cytosolic microRNA as well as additional fluorophores. When the intracellular diagnostic system is delivered, fluorescence signals are generated by the molecular beacons, depending on the concentration of the target microRNA. The fluorescence signals are then normalized to the intensity of the additional fluorophore. Through this simple calculation, the concentration of intracellular microRNA can be determined without interference from the diagnosis system itself. And also it enabled discrimination of microRNA expression heterogeneity in five different breast cancer cell lines.

Polymerization-Like Co-Assembly of Silver Nanoplates and Patchy Spheres

Highly anisometric nanoparticles have distinctive mechanical, electrical, and thermal properties and are therefore appealing candidates for use as self-assembly building blocks. Here, we demonstrate that ultra-anisometric nanoplates, which have a nanoscale thickness but a micrometer-scale edge length, offer many material design capabilities. In particular, we show that these nanoplates "copolymerize" in a predictable way with patchy spheres (Janus and triblock particles) into one- and two-dimensional structures with tunable architectural properties. We find that, on the pathway to these structures, nanoplates assemble into chains following the kinetics of molecular step-growth polymerization. In the same mechanistic framework, patchy spheres control the size distribution and morphology of assembled structures, by behaving as monofunctional chain stoppers or multifunctional branch points during nanoplate polymerization. In addition, both the lattice constant and the stiffness of the nanoplate assemblies can be manipulated after assembly. We see highly anisometric nanoplates as one representative of a broader class of dual length-scale nanoparticles, with the potential to enrich the library of structures and properties available to the nanoparticle self-assembly toolbox.