Hierarchical Assembly of DNA Filaments with Designer Elastic Properties

Construction of Reconfigurable and Polymorphic DNA Origami Assemblies with Coiled-Coil Patches and Patterns

DNA origami nanodevices achieve programmable structure and tunable mechanical and dynamic properties by leveraging the sequence-specific interactions of nucleic acids. Previous advances have also established DNA origami as a useful building block to make well-defined micron-scale structures through hierarchical self-assembly, but these efforts have largely leveraged the structural features of DNA origami. The tunable dynamic and mechanical properties also provide an opportunity to make assemblies with adaptive structures and properties. Here the integration of DNA origami hinge nanodevices and coiled-coil peptides are reported into hybrid reconfigurable assemblies. With the same dynamic device and peptide interaction, it is made multiple higher-order assemblies (i.e., polymorphic assembly) by organizing clusters of peptides into patches or arranging single peptides into patterns on the surfaces of DNA origami to control the relative orientation of devices. The coiled-coil interactions are used to construct circular and linear assemblies whose structure and mechanical properties can be modulated with DNA-based reconfiguration. Reconfiguration of linear assemblies leads to micron scale motions and ≈2.5-10-fold increase in bending stiffness. The results provide a foundation for stimulus-responsive hybrid assemblies that can adapt their structure and properties in response to nucleic acid, peptide, protein, or other triggers.

High-Affinity Host-Guest Recognition for Efficient Assembly and Enzymatic Responsiveness of DNA Nanostructures

The combination of multiple orthogonal interactions enables hierarchical complexity in self-assembled nanoscale materials. Here, efficient supramolecular polymerization of DNA origami nanostructures is demonstrated using a multivalent display of small molecule host-guest interactions. Modification of DNA strands with cucurbit[7]uril (CB[7]) and its adamantane guest, yielding a supramolecular complex with an affinity of order 1010 m-1 , directs hierarchical assembly of origami monomers into 1D nanofibers. This affinity regime enables efficient polymerization; a lower-affinity β-cyclodextrin-adamantane complex does not promote extended structures at a similar valency. Finally, the utility of the high-affinity CB[7]-adamantane interactions is exploited to enable responsive enzymatic actuation of origami nanofibers assembled using peptide linkers. This work demonstrates the power of high-affinity CB[7]-guest recognition as an orthogonal axis to drive self-assembly in DNA nanotechnology.

Construction and reconfiguration of dynamic DNA origami assemblies with coiled-coil patches and patterns

DNA origami nanodevices achieve programmable structure and tunable mechanical and dynamic properties by leveraging the sequence specific interactions of nucleic acids. Previous advances have also established DNA origami as a useful building block to make well-defined micron-scale structures through hierarchical self-assembly, but these efforts have largely leveraged the structural features of DNA origami. The tunable dynamic and mechanical properties also provide an opportunity to make assemblies with adaptive structure and properties. Here we report the integration of DNA origami hinge nanodevices and coiled-coil peptides into hybrid reconfigurable assemblies. With the same dynamic device and peptide interaction, we make multiple higher order assemblies by organizing clusters of peptides (i.e. patches) or arranging single peptides (i.e. patterns) on the surfaces of DNA origami to control the relative orientation of devices. We use coiled-coil interactions to construct circular and linear assemblies whose structure and mechanical properties can be modulated with DNA-based actuation. Actuation of linear assemblies leads to micron scale motions and ~2.5-10-fold increase in bending stiffness. Our results provide a foundation for stimulus responsive hybrid assemblies that can adapt their structure and properties in response to nucleic acid, peptide, protein, or other triggers.

Versatile computer-aided design of free-form DNA nanostructures and assemblies

Recent advances in structural DNA nanotechnology have been facilitated by design tools that continue to push the limits of structural complexity while simplifying an often-tedious design process. We recently introduced the software MagicDNA, which enables design of complex 3D DNA assemblies with many components; however, the design of structures with free-form features like vertices or curvature still required iterative design guided by simulation feedback and user intuition. Here, we present an updated design tool, MagicDNA 2.0, that automates the design of free-form 3D geometries, leveraging design models informed by coarse-grained molecular dynamics simulations. Our GUI-based, stepwise design approach integrates a high level of automation with versatile control over assembly and subcomponent design parameters. We experimentally validated this approach by fabricating a range of DNA origami assemblies with complex free-form geometries, including a 3D Nozzle, G-clef, and Hilbert and Trifolium curves, confirming excellent agreement between design input, simulation, and structure formation.

Multi-Reconfigurable DNA Origami Nanolattice Driven by the Combination of Orthogonal Signals

The progress of the scaffolded DNA origami technology has enabled the construction of various dynamic nanodevices imitating the shapes and motions of mechanical elements. To further expand the achievable configurational changes, the incorporation of multiple movable joints into a single DNA origami structure and their precise control are desired. Here, we propose a multi-reconfigurable 3 × 3 lattice structure consisting of nine frames with rigid four-helix struts connected with flexible 10-nucleotide joints. The configuration of each frame is determined by the arbitrarily selected orthogonal pair of signal DNAs, resulting in the transformation of the lattice into various shapes. We also demonstrated sequential reconfiguration of the nanolattice and its assemblies from one into another via an isothermal strand displacement reaction at physiological temperatures. Our modular and scalable design approach could serve as a versatile platform for a variety of applications that require reversible and continuous shape control with nanoscale precision.

Thermally reversible pattern formation in arrays of molecular rotors

Control over the mesoscale to microscale patterning of materials is of great interest to the soft matter community. Inspired by DNA origami rotors, we introduce a 2D nearest-neighbor lattice of spinning rotors that exhibit discrete orientational states and interactions with their neighbors. Monte Carlo simulations of rotor lattices reveal that they exhibit a variety of interesting ordering behaviors and morphologies that can be modulated through rotor design parameters. The rotor arrays exhibit diverse patterns including closed loops, radiating loops, and bricklayer structures in their ordered states. They exhibit specific heat peaks at very low temperatures for small system sizes, and some systems exhibit multiple order-disorder transitions depending on inter-rotor interaction design. We devise an energy-based order parameter and show via umbrella sampling and histogram reweighting that this order parameter captures well the order-disorder transitions occurring in these systems. We fabricate real DNA origami rotors which themselves can order via programmable DNA base-pairing interactions and demonstrate both ordered and disordered phases, illustrating how rotor lattices may be realized experimentally and used for responsive organization. This work establishes the feasibility of realizing structural nanomaterials that exhibit locally mediated microscale patterns which could have applications in sensing and precision surface patterning.

DNA origami tubes with reconfigurable cross-sections

Structural DNA nanotechnology has enabled the design and construction of complex nanoscale structures with precise geometry and programmable dynamic and mechanical properties. Recent efforts have led to major advances in the capacity to actuate shape changes of DNA origami devices and incorporate DNA origami into larger assemblies, which open the prospect of using DNA to design shape-morphing assemblies as components of micro-scale reconfigurable or sensing materials. Indeed, a few studies have constructed higher order assemblies with reconfigurable devices; however, these demonstrations have utilized structures with relatively simple motion, primarily hinges that open and close. To advance the shape changing capabilities of DNA origami assemblies, we developed a multi-component DNA origami 6-bar mechanism that can be reconfigured into various shapes and can be incorporated into larger assemblies while maintaining capabilities for a variety of shape transformations. We demonstrate the folding of the 6-bar mechanism into four different shapes and demonstrate multiple transitions between these shapes. We also studied the shape preferences of the 6-bar mechanism in competitive folding reactions to gain insight into the relative free energies of the shapes. Furthermore, we polymerized the 6-bar mechanism into tubes with various cross-sections, defined by the shape of the individual mechanism, and we demonstrate the ability to change the shape of the tube cross-section. This expansion of current single-device reconfiguration to higher order scales provides a foundation for nano to micron scale DNA nanotechnology applications such as biosensing or materials with tunable properties.

Growth Rate and Thermal Properties of DNA Origami Filaments

Synthetic DNA filaments exploit the programmability of the individual units and their predictable self-association to mimic the structural and dynamic features of natural protein filaments. Among them, DNA origami filamentous structures are of particular interest, due to the versatility of morphologies, mechanical properties, and functionalities attainable. We here explore the thermodynamic and kinetic properties of linear structures grown from a ditopic DNA origami unit, i.e., a monomer with two distinct interfaces, and employ either base-hybridization or base-stacking interactions to trigger the dimerization and polymerization process. By observing the temporal evolution of the system toward equilibrium, we reveal kinetic aspects of filament growth that cannot be easily captured by postassembly studies. Our work thus provides insights into the thermodynamics and kinetics of hierarchical DNA origami assembly and shows how it can be mastered by the anisotropy of the building unit and its self-association mode.

Design, Mechanical Properties, and Dynamics of Synthetic DNA Filaments

Over the past 40 years, structural and dynamic DNA nanotechnologies have undoubtedly demonstrated to be effective means for organizing matter at the nanoscale and reconfiguring equilibrium structures, in a predictable fashion and with an accuracy of a few nanometers. Recently, novel concepts and methodologies have been developed to integrate nonequilibrium dynamics into DNA nanostructures, opening the way to the construction of synthetic materials that can adapt to environmental changes and thus acquire new properties. In this Review, we summarize the strategies currently applied for the construction of synthetic DNA filaments and conclude by reporting some recent and most relevant examples of DNA filaments that can emulate typical structural and dynamic features of the cytoskeleton, such as compartmentalization in cell-like vesicles, support for active transport of cargos, sustained or transient growth, and responsiveness to external stimuli.

Nanopolymers for magnetic applications: how to choose the architecture?

Directional assembly of nanoscale objects results in morphologies that can broadly be classified as supra-molecular nanopolymers. Such morphologies, given a functional choice of the monomers used as building blocks, can be of ubiquitous utility in optical, magnetic, rheological, and medical applications. These applications, however, require a profound understanding of the interplay between monomer shape and bonding on one side, and polymeric properties - on the other. Recently, we fabricated nanopolymers using cuboid DNA nanochambers, as they not only allow fine-tuning of the resulting morphologies but can also carry magnetic nanoparticles. However, it is not known if the cuboid shape and inter-cuboid connectivity restrict the equilibrium confirmations of the resulting nanopolymers, making them less responsive to external stimuli. In this work, using Molecular Dynamics simulations, we perform an extensive comparison between various nanopolymer architectures to explore their polymeric properties, and their response to an applied magnetic field if magnetic nanoparticles are embedded. We explain the impact of monomer shape and bonding on the mechanical and magnetic properties and show that DNA nanochambers can build highly responsive and magnetically controllable nanopolymers.

Divalent Multilinking Bonds Control Growth and Morphology of Nanopolymers

Assembly of nanoscale objects into linear architectures resembling molecular polymers is a basic organization resulting from divalent interactions. Such linear architectures occur for particles with two binding patches on opposite sides, known as Janus particles. However, unlike molecular systems where valence bonds can be envisioned as pointlike interactions nanoscale patches are often realized through multiple molecular linkages. The relationship between the characteristics of these linkages, the resulting interpatch connectivity, and assembly morphology is not well-explored. Here, we investigate assembly behavior of model divalent nanomonomers, DNA nanocuboid with tailorable multilinking bonds. Our study reveals that the characteristics of individual molecular linkages and their collective properties have a profound effect on nanomonomer reactivity and resulting morphologies. Beyond linear nanopolymers, a common signature of divalent nanomonomers, we observe an effective valence increase as linkages lengthened, leading to the nanopolymer bundling. The experimental findings are rationalized by molecular dynamics simulations.

Chiral 3D DNA origami structures for ordered heterologous arrays

The DNA origami technique allows the facile design and production of three-dimensional shapes from single template strands of DNA. These can act as functional devices with multiple potential applications but are constrained by practical limitations on size. Multi-functionality could be achieved by connecting together distinct DNA origami modules in an ordered manner. Arraying of non-identical, three-dimensional DNA origamis in an ordered manner is challenging due for example, to a lack of compatible rotational symmetries. Here we show that we can design and build ordered DNA structures using non-identical 3D building blocks by using DNA origami snub-cubes in left-handed and right-handed forms. These can be modified such that one form only binds to the opposite-handed form allowing regular arrays wherein building blocks demonstrate alternating chirality.

Boosting biomolecular interactions through DNA origami nano-tailored biosensing interfaces

The interaction between a bioreceptor and its target is key in developing sensitive, specific and robust diagnostic devices. Suboptimal interbioreceptor distances and bioreceptor orientation on the sensor surface, resulting from uncontrolled deposition, impede biomolecular interactions and lead to a decreased biosensor performance. In this work, we studied and implemented a 3D DNA origami design, for the first time comprised of assay specifically tailored anchoring points for the nanostructuring of the bioreceptor layer on the surface of disc-shaped microparticles in the continuous microfluidic environment of the innovative EvalutionTM platform. This bioreceptor immobilization strategy resulted in the formation of a less densely packed surface with reduced steric hindrance and favoured upward orientation. This increased bioreceptor accessibility led to a 4-fold enhanced binding kinetics and a 6-fold increase in binding efficiency compared to a directly immobilized non-DNA origami reference system. Moreover, the DNA origami nanotailored biosensing concept outperformed traditional aptamer coupling with respect to limit of detection (11 × improved) and signal-to-noise ratio (2.5 × improved) in an aptamer-based sandwich bioassay. In conclusion, our results highlight the potential of these DNA origami nanotailored surfaces to improve biomolecular interactions at the sensing surface, thereby increasing the overall performance of biosensing devices. The combination of the intrinsic advantages of DNA origami together with a smart design enables bottom-up nanoscale engineering of the sensor surface, leading towards the next generation of improved diagnostic sensing devices.

Constructing Large 2D Lattices Out of DNA-Tiles

The predictable nature of deoxyribonucleic acid (DNA) interactions enables assembly of DNA into almost any arbitrary shape with programmable features of nanometer precision. The recent progress of DNA nanotechnology has allowed production of an even wider gamut of possible shapes with high-yield and error-free assembly processes. Most of these structures are, however, limited in size to a nanometer scale. To overcome this limitation, a plethora of studies has been carried out to form larger structures using DNA assemblies as building blocks or tiles. Therefore, DNA tiles have become one of the most widely used building blocks for engineering large, intricate structures with nanometer precision. To create even larger assemblies with highly organized patterns, scientists have developed a variety of structural design principles and assembly methods. This review first summarizes currently available DNA tile toolboxes and the basic principles of lattice formation and hierarchical self-assembly using DNA tiles. Special emphasis is given to the forces involved in the assembly process in liquid-liquid and at solid-liquid interfaces, and how to master them to reach the optimum balance between the involved interactions for successful self-assembly. In addition, we focus on the recent approaches that have shown great potential for the controlled immobilization and positioning of DNA nanostructures on different surfaces. The ability to position DNA objects in a controllable manner on technologically relevant surfaces is one step forward towards the integration of DNA-based materials into nanoelectronic and sensor devices.

Multivalency Pattern Recognition to Sort Colloidal Assemblies

Multivalent interaction is an important principle for self-assembly and has been widely used to assemble colloids. However, surface binding partners are statistically distributed, which falls short of the interaction possibilities arising from geometrically controlled multivalency patterns as seen in viruses. Herein, the precision provided by 3D DNA origami is exploited to introduce multivalency pattern recognition via designing geometrically precise interaction patterns at patches of patchy nanocylinders. This gives rise to self-sorting of colloidal assemblies despite having the same type and number of supramolecular binding motifs-solely based on the pattern located on a 20 × 20 nm² cross-section. The degree of sorting can be modulated by the geometric overlap of patterns and homo; mixed and alternating supracolloidal polymerizations are demonstrated. Multivalency patterns are able to provide an additional information layer to organize soft matter, important towards engineering of biological responses and functional materials design.

Computing the Elastic Mechanical Properties of Rodlike DNA Nanostructures

To study the elastic properties of rodlike DNA nanostructures, we perform long simulations of these structures using the oxDNA coarse-grained model. By analyzing the fluctuations in these trajectories, we obtain estimates of the bend and twist persistence lengths and the underlying bend and twist elastic moduli and couplings between them. Only on length scales beyond those associated with the spacings between the interhelix crossovers do the bending fluctuations behave like those of a wormlike chain. The obtained bending persistence lengths are much larger than that for double-stranded DNA and increase nonlinearly with the number of helices, whereas the twist moduli increase approximately linearly. To within the numerical error in our data, the twist-bend coupling constants are of order zero. That the bending persistence lengths that we obtain are generally somewhat higher than in experiment probably reflects both that the simulated origamis have no assembly defects and that the oxDNA extensional modulus for double-stranded DNA is too large.

Switchable supracolloidal 3D DNA origami nanotubes mediated through fuel/antifuel reactions

3D DNA origami provide access to the de novo design of monodisperse and functional bio(organic) nanoparticles, and complement structural protein engineering and inorganic and organic nanoparticle synthesis approaches for the design of self-assembling colloidal systems. We show small 3D DNA origami nanoparticles, which polymerize and depolymerize reversibly to nanotubes of micrometer lengths by applying fuel/antifuel switches. 3D DNA nanocylinders are engineered as a basic building block with different numbers of overhang strands at the open sides to allow for their assembly via fuel strands that bridge both overhangs, resulting in the supracolloidal polymerization. The influence of the multivalent interaction patterns and the length of the bridging fuel strand on efficient polymerization and nanotube length distribution is investigated. The polymerized multivalent nanotubes disassemble through toehold-mediated rehybridization by adding equimolar amounts of antifuel strands. Finally, Förster resonance energy transfer yields in situ insights into the kinetics and reversibility of the nanotube polymerization and depolymerization.

Information Coding in a Reconfigurable DNA Origami Domino Array

DNA nanostructures with programmable nanoscale patterns has been achieved in the past decades, and molecular information coding (MIC) on those designed nanostructures has gained increasing attention for information security. However, achieving steganography and cryptography synchronously on DNA nanostructures remains a challenge. Herein, we demonstrated MIC in a reconfigurable DNA origami domino array (DODA), which can reconfigure intrinsic patterns but keep the DODA outline the same for steganography. When a set of keys (DNA strands) are added, the cryptographic data can be translated into visible patterns within DODA. More complex cryptography with the ASCII code within a programmable 6×6 lattice is demonstrated to demosntrate the versatility of MIC in the DODA. Furthermore, an anti-counterfeiting approach based on conformational transformation-mediated toehold strand displacement reaction is designed to protect MIC from decoding and falsification.

Immobilization Techniques for Aptamers on Gold Electrodes for the Electrochemical Detection of Proteins: A Review

The development of reliable biosensing platforms plays a key role in the detection of proteins in clinically and environmentally derived samples for diagnostics, as well as for process monitoring in biotechnological productions. For this purpose, the biosensor has to be stable and reproducible, and highly sensitive to detect potentially extremely low concentrations and prevent the nonspecific binding of interfering compounds. In this review, we present an overview of recently published (2017–2019) immobilization techniques for aptamers on gold electrodes for the electrochemical detection of proteins. These include the direct immobilization of thiolated aptamers and the utilization of short linkers, streptavidin/biotin interaction, as well as DNA nanostructures and reduced graphene oxide as immobilization platforms. Applied strategies for signal amplification and the prevention of biofouling are additionally discussed, as they play a crucial role in the design of biosensors. While a wide variety of amplification strategies are already available, future investigations should aim to establish suitable antifouling strategies that are compatible with electrochemical measurements. The focus of our review lies on the detailed discussion of the underlying principles and the presentation of utilized chemical protocols in order to provide the reader with promising ideas and profound knowledge of the subject, as well as an update on recent discoveries and achievements.

Supracolloidal Self-Assembly of Divalent Janus 3D DNA Origami via Programmable Multivalent Host/Guest Interactions

We introduce divalent 3D DNA origami cuboids as truly monodisperse colloids and harness their ability for precision functionalization with defined patches and defined numbers of supramolecular binding motifs. We demonstrate that even adamantane/β-cyclodextrin host/guest inclusion complexes of moderate association strength can induce efficient supracolloidal fibrillization at high dilution of the 3D DNA Origami as a result of cooperative multivalency. We show details on the assembly of Janus and non-Janus 3D DNA origami into supracolloidal homo- and heterofibrils with respect to multivalency effects, electrostatic screening, and stoichiometry. We believe that the merger of 3D DNA origami with colloidal self-assembly and supramolecular motifs provides new synergies at the interface of these disciplines to better understand multivalency effects, to promote structural complexity, and add non-DNA assembling and switching mechanisms to DNA nanoscience.

Large Deformation of a DNA-Origami Nanoarm Induced by the Cumulative Actuation of Tension-Adjustable Modules

Making use of the programmability and structural flexibility of the DNA molecule, a DNA-origami nanoarm capable of undergoing large deformation is constructed. This DNA-origami nanoarm comprised serially repeated tension-adjustable modules, the cumulative actuation of which resulted in a large deformation of the arm structure, which transformed from a linear shape into an arched shape. Combining atomic force microscopy and theoretical analyses based on the mechanics of materials, we demonstrate that the degree of deformation can be systematically controlled by merely replacing a set of strands that is required for the actuation of the module. Moreover, by employing a G-quadruplex-forming sequence for the actuation, we could achieve reversible ion-induced contraction and relaxation of the nanoarm. The adjustability and scalability of this design could enable the production of DNA nanodevices that exhibit large deformation in response to external stimuli.

Tailoring the Mechanical Stiffness of DNA Nanostructures Using Engineered Defects

As scaffolded DNA origami enables the construction of diverse DNA nanostructures with predefined shapes, precise modulation of their mechanical stiffness remains challenging. We demonstrate a modular design method to widely and precisely control the mechanical flexibility of scaffolded DNA origami nanostructures while maintaining their overall structural integrity and geometric characteristics. Individually engineered defects that are short single-stranded DNA (ssDNA) gaps could reduce up to 70% of the bending stiffness of DNA origami constructs with different cross-sectional shapes. We further developed a computational analysis platform predicting the bending stiffness of a defect-engineered DNA nanostructure quickly during the design process, to offer an efficient way of designing various DNA constructs with required mechanical stiffness in a desired shape for a targeted function.

Create Nanoscale Patterns with DNA Origami

Structural deoxyribonucleic acid (DNA) nanotechnology offers a robust platform for diverse nanoscale shapes that can be used in various applications. Among a wide variety of DNA assembly strategies, DNA origami is the most robust one in constructing custom nanoshapes and exquisite patterns. In this account, the static structural and functional patterns assembled on DNA origami are reviewed, as well as the reconfigurable assembled architectures regulated through dynamic DNA nanotechnology. The fast progress of dynamic DNA origami nanotechnology facilitates the construction of reconfigurable patterns, which can further be used in many applications such as optical/plasmonic sensors, nanophotonic devices, and nanorobotics for numerous different tasks.

Fabrication of Metal Nanostructures with Programmable Length and Patterns Using a Modular DNA Platform

Recently introduced DNA nanomolds allow the shape-controlled growth of metallic nanoparticles. Here we demonstrate that this approach can be used to fabricate longer linear metal nanostructures of controlled lengths and patterns. To this end, we establish a set of different interfaces that enable mold interactions with high affinity and specificity. These interfaces enable and control the modular assembly of mold monomers into larger mold superstructure with programmable dimension in which each mold monomer remains uniquely addressable. Preloading the molds with nanoparticle seeds subsequently allows the growth of linear gold nanostructures whose lengths are controlled by the DNA structure. Exploiting the addressability of individual mold monomers furthermore allows achievement of site-specific metallization, that is, to create defined metal patterns. We think that the introduced approach provides a useful basis to fabricate nanomaterials with complex shapes and material composition in a fully programmable and modular fashion.

Three-Dimensional DNA Origami as Programmable Anchoring Points for Bioreceptors in Fiber Optic Surface Plasmon Resonance Biosensing

Many challenges in biosensing originate from the fact that the all-important nanoarchitecture of the biosensor surface, including precise density and orientation of bioreceptors, is not entirely comprehended. Here, we introduced a three-dimensional DNA origami as a bioreceptor carrier to functionalize the fiber optic surface plasmon resonance (FO-SPR) sensor with nanoscale precision. Starting from a 24-helix bundle, two distinct DNA origami structures were designed to position thrombin-specific aptamers with different densities and distances (27 and 113 nm) from the FO-SPR surface. The origami-based biosensors not only proved to be capable of reproducible, label-free thrombin detection but revealed also valuable innovative features: (1) a significantly better performance in the absence of backfilling, known as essential in the biosensing field, suggesting improved bioreceptor orientation and accessibility, and (2) a wider linear range compared to previously reported thrombin biosensors. We envisage that our method will be beneficial for both scientists and clinicians looking for new surface (bio)chemistry and improved diagnostics.

Synthetic DNA filaments: from design to applications

Natural filaments, such as microtubules and actin filaments, are fundamental components of the cell. Despite their relatively simple linear structure, filaments play a number of crucial roles in living organisms, from scaffolding to cellular adhesion and motility. The mechanical properties of natural filaments mostly rely on the structural features of the component units and on the way they are connected together, thus providing an ideal molecular model for emulation purposes. In this review, we describe the progresses done in this field using DNA for the rational design of synthetic filamentous-like materials with tailored structural and physical characteristics. We firstly survey the strategies that have been adopted until now for the construction of individual DNA building components and their programmable self-assembly into linear oligomeric structures. We then describe the theoretical models of polymer elasticity applied to calculate the bending strength of DNA filaments, expressed in terms of persistence length. Finally, we report some of the most exciting examples of truly biomimetic DNA filaments, which are capable of mimicking not only the sophisticated structural features of their natural counterparts but also their responsiveness to external stimuli, thus resulting in active motion and growing networks between distant loci.