Revisiting the Mechanism of Oxidative Unzipping of Multiwall Carbon Nanotubes to Graphene Nanoribbons

Recent Advances on Carbon-Based Metal-Free Electrocatalysts for Energy and Chemical Conversions

Over the last decade, carbon-based metal-free electrocatalysts (C-MFECs) have become important in electrocatalysis. This field is started thanks to the initial discovery that nitrogen atom doped carbon can function as a metal-free electrode in alkaline fuel cells. A wide variety of metal-free carbon nanomaterials, including 0D carbon dots, 1D carbon nanotubes, 2D graphene, and 3D porous carbons, has demonstrated high electrocatalytic performance across a variety of applications. These include clean energy generation and storage, green chemistry, and environmental remediation. The wide applicability of C-MFECs is facilitated by effective synthetic approaches, e.g., heteroatom doping, and physical/chemical modification. These methods enable the creation of catalysts with electrocatalytic properties useful for sustainable energy transformation and storage (e.g., fuel cells, Zn-air batteries, Li-O2 batteries, dye-sensitized solar cells), green chemical production (e.g., H2O2, NH3, and urea), and environmental remediation (e.g., wastewater treatment, and CO2 conversion). Furthermore, significant advances in the theoretical study of C-MFECs via advanced computational modeling and machine learning techniques have been achieved, revealing the charge transfer mechanism for rational design and development of highly efficient catalysts. This review offers a timely overview of recent progress in the development of C-MFECs, addressing material syntheses, theoretical advances, potential applications, challenges and future directions.

Alignment Control of Ferrite-Decorated Nanocarbon Material for 3D Printing

This paper demonstrates the potential of anisotropic 3D printing for alignable carbon nanomaterials. The ferrite-decorated nanocarbon material was synthesized via a sodium solvation process using epichlorohydrin as the coupling agent. Employing a one-pot synthesis approach, the novel material was incorporated into a 3D photopolymer, manipulated, and printed using a low-cost microscale 3D printer, equipped with digital micromirror lithography, monitoring optics, and magnetic actuators. This technique highlights the ability to control the microstructure of 3D-printed objects with sub-micron precision for applications such as microelectrode sensors and microrobot fabrication.

A colorimetric sensor array based on nanoceria crosslinked and heteroatom-doped graphene oxide nanoribbons for the detection and discrimination of multiple pesticides

Nanozymes have demonstrated high potential in constructing colorimetric sensor array for pesticides. However, rarely array for pesticides constructed without bio-enzyme were reported. Herein, nanoceria crosslinked graphene oxide nanoribbons (Ce-GONRs) and heteroatom-doped graphene oxide nanoribbons (Ce-BGONRs and Ce-NGONRs) were prepared, demonstrating excellent peroxidase-like activities. A colorimetric sensor array was developed based on directly inhibiting the peroxidase-like activities of the above three nanozymes, which realized the discrimination and quantitative analysis of six pesticides. In the presence of pesticides including carbaryl (Car), fluroxypyr-mepthyl (Flu), thiophanate-methyl (Thio), thiram (Thir), diafenthiuron (Dia) and fomesafen (Fom), the peroxidase-like activities of three nanozymes were inhibited to different degrees, resulting in different fingerprint responses. The six pesticides in the concentration range of 0.1-50 μg/mL and two pesticides mixtures at varied ratios could be detected and discriminated, and minimum detection limit for pesticides was 0.022 μg/mL. In addition, this sensor array has been successfully applied for pesticides discrimination in lake water and apple samples. This work provided a new strategy of constructing simple and sensitive colorimetric sensor array for pesticides based on directly inhibiting the catalytic activities of nanozymes.

Resolution of MoS2 Nanosheets-Induced Pulmonary Inflammation Driven by Nanoscale Intracellular Transformation and Extracellular-Vesicle Shuttles

Pulmonary exposure to some engineered nanomaterials can cause chronic lesions as a result of unresolved inflammation. Among 2D nanomaterials and graphene, MoS₂ has received tremendous attention in optoelectronics and nanomedicine. Here an integrated approach is proposed to follow up the transformation of MoS₂ nanosheets at the nanoscale and assesss their impact on lung inflammation status over 1 month after a single inhalation in mice. Analysis of immune cells, alveolar macrophages, extracellular vesicles, and cytokine profiling in bronchoalveolar lavage fluid (BALF) shows that MoS₂ nanosheets induced initiation of lung inflammation. However, the inflammation is rapidly resolved despite the persistence of various biotransformed molybdenum-based nanostructures in the alveolar macrophages and the extracellular vesicles for up to 1 month. Using in situ liquid phase transmission electron microscopy experiments, the dynamics of MoS₂ nanosheets transformation triggered by reactive oxygen species could be evidenced. Three main transformation mechanisms are observed directly at the nanoscale level: 1) scrolling of the dispersed sheets leading to the formation of nanoscrolls and folded patches, 2) etching releasing soluble MoO₄ ^- , and 3) oxidation generating oxidized sheet fragments. Extracellular vesicles released in BALF are also identified as a potential shuttle of MoS₂ nanostructures and their degradation products and more importantly as mediators of inflammation resolution.

Comparative study of the efficiency of silicon carbide, boron nitride and carbon nanotube to deliver cancerous drug, azacitidine: A DFT study

Herein we have made a comparative study of the efficiency of three different nanotubes viz. Carbon nanotube (CNT), boron nitride nanotube (BNNT) and silicon carbide nanotube (SiCNT) to deliver the cancerous drug, Azacitidine (AZD). The atomistic description of the encapsulation process of AZD in these nanotubes has been analyzed by evaluating parameters like adsorption energy, electrostatic potential map, reduced density gradient (RDG). Higher adsorption energy of AZD with BNNT (-0.66eV), SiCNT (-0.92eV) compared to CNT (-0.56eV) confirms stronger binding affinity of the drug for the former than the later. Charge density and electrostatic potential map suggest that charge separation involving BNNT and CNT is more prominent than SiCNT. Evaluation of different thermodynamic parameters like Gibbs free energy, enthalpy change revealed that the overall encapsulation process is spontaneous and exothermic in nature and much favorable with BNNT and SiCNT. Stabilizing interactions of the drug with BNNT and SiCNT has been confirmed from RDG analysis. ADMP molecular dynamics simulation supports that the encapsulation process of the drug within the NT at room temperature. These results open up unlimited opportunities for the applications of these NTs as a drug delivery system in the field of nanomedicine.

An Introduction to the Combustion of Carbon Materials

Combustion is arguably as old as homo sapiens ability to observe and use fire. Despite the long tradition of using carbon combustion for energy production, this reaction is still not fully understood. This can be related to several facts that are intertwined and complicate the investigation, such as the large variety of possible carbon structures, the actual surface structure, porosity, the solid-gas nature of this reaction, diffusion limitation and fundamental reaction steps. In this review, a brief history of carbon combustion science is given, followed by a detailed discussion of the most important aspects of carbon combustion. Special attention is given to limitations for example diffusion. In carbon combustion, kinetic control can rarely be observed. The literature of the fundamental reaction steps actually occurring on the carbon framework is reviewed and it becomes apparent that the reaction is occurring primarily on defects on the basal plane. Thus, the reaction between oxygen and carbon may be used as an analytical tool to provide further insights into novel materials, for example synthetic carbon materials, fibres and graphene type materials. Mastering the combustion reaction in all its complexity may prove to be very valuable in the future.

Effective Method for a Graphene Oxide with Impressive Selectivity in Carboxyl Groups

The development of new applications of graphene oxide in the biomedical field requires the covalent bonding of bioactive molecules to a sheet skeleton. Obtaining a large carboxyl group population over the surface is one of the main targets, as carboxyl group concentration in conventional graphene oxide is low among a majority of non-useful sp3-C-based functionalities. In the present work, we propose a selective method that yields an impressive increase in carboxyl group population using single-layer, thermally reduced graphene oxide as a precursor in a conventional Hummers-Offemann reaction. When starting with a reduced graphene oxide with no interlayer registry, sulfuric acid cannot form a graphite intercalated compound. Then, potassium permanganate attacks in in-plane (vacancies or holes) structural defects, which are numerous over a thermally reduced graphene oxide, as well as in edges, yielding majorly carboxyl groups without sheet cutting and unzipping, as no carbon dot formation was observed. A single-layer precursor with no ordered stacking prevents the formation of an intercalated compound, and it is this mechanism of the potassium permanganate that results in carboxyl group formation and the hydrophilic character of the compound.

Revisiting the Roles of Natural Graphite in Ongoing Lithium-Ion Batteries

Graphite, commonly including artificial graphite and natural graphite (NG), possesses a relatively high theoretical capacity of 372 mA h g^-1 and appropriate lithiation/de-lithiation potential, and has been extensively used as the anode of lithium-ion batteries (LIBs). With the requirements of reducing CO₂ emission to achieve carbon neutral, the market share of NG anode will continue to grow due to its excellent processability and low production energy consumption. NG, which is abundant in China, can be divided into flake graphite (FG) and microcrystalline graphite (MG). In the past 30 years, many researchers have focused on developing modified NG and its derivatives with superior electrochemical performance, promoting their wide applications in LIBs. Here, a comprehensive overview of the origin, roles, and research progress of NG-based materials in ongoing LIBs is provided, including their structure, properties, electrochemical performance, modification methods, derivatives, composites, and applications, especially the strategies to improve their high-rate and low-temperature charging performance. Prospects regarding the development orientation as well as future applications of NG-based materials are also considered, which will provide significant guidance for the current and future research of high-energy-density LIBs.

Properties and Applications of Graphene and Its Derivatives in Biosensors for Cancer Detection: A Comprehensive Review

Cancer is one of the deadliest diseases worldwide, and there is a critical need for diagnostic platforms for applications in early cancer detection. The diagnosis of cancer can be made by identifying abnormal cell characteristics such as functional changes, a number of vital proteins in the body, abnormal genetic mutations and structural changes, and so on. Identifying biomarker candidates such as DNA, RNA, mRNA, aptamers, metabolomic biomolecules, enzymes, and proteins is one of the most important challenges. In order to eliminate such challenges, emerging biomarkers can be identified by designing a suitable biosensor. One of the most powerful technologies in development is biosensor technology based on nanostructures. Recently, graphene and its derivatives have been used for diverse diagnostic and therapeutic approaches. Graphene-based biosensors have exhibited significant performance with excellent sensitivity, selectivity, stability, and a wide detection range. In this review, the principle of technology, advances, and challenges in graphene-based biosensors such as field-effect transistors (FET), fluorescence sensors, SPR biosensors, and electrochemical biosensors to detect different cancer cells is systematically discussed. Additionally, we provide an outlook on the properties, applications, and challenges of graphene and its derivatives, such as Graphene Oxide (GO), Reduced Graphene Oxide (RGO), and Graphene Quantum Dots (GQDs), in early cancer detection by nanobiosensors.

Tuning wettability and electrical conductivity of single-walled carbon nanotubes by the modified Hummers method

Partial oxidation of nanocarbon materials is one of the most straightforward methods to improve their compatibility with other materials, which widens its application potential. This work studied how the microstructure and properties of high crystallinity single-walled carbon nanotubes (SWCNTs) can be tailored by applying the modified Hummers method. The influence of temperature (0, 18, 40 °C), reaction time (0 min to 7 h), and the amount of KMnO4 oxidant was monitored. The results showed that depending on the oxidation conditions, the electronic characteristics of the material could be adjusted. After optimizing the parameters, the SWCNTs were much more conductive (1369 ± 84 S/cm with respect to 283 ± 32 S/cm for the untreated material). At the same time, the films made from them exhibited hydrophilic character of the surface (water contact angle changed from 71° to 27°).

Photoluminescent Semiconducting Graphene Nanoribbons via Longitudinally Unzipping Single-Walled Carbon Nanotubes

The lack of a sizeable band gap has so far prevented graphene from building effective electronic and optoelectronic devices despite its numerous exceptional properties. Intensive theoretical research reveals that a band gap larger than 1 eV can only be achieved in sub-3 nm wide graphene nanoribbons (GNRs), but real fabrication of such ultranarrow GNRs still remains a critical challenge. Herein, we demonstrate an approach for the synthesis of ultranarrow and photoluminescent semiconducting GNRs by longitudinally unzipping single-walled carbon nanotubes. Atomic force microscopy reveals the unzipping process, and the resulting 2.2 nm wide GNRs are found to emit strong and sharp photoluminescence at ∼685 nm, demonstrating a very desirable semiconducting nature. This band gap of 1.8 eV is further confirmed by follow-up photoconductivity measurements, where a considerable photocurrent is generated, as the excitation wavelength becomes shorter than 700 nm. More importantly, our fabricated GNR field-effect transistors (FETs), by employing the hexagonal boron nitride-encapsulated heterostructure to achieve edge-bonded contacts, demonstrate a high current on/off ratio beyond 105 and carrier mobility of 840 cm2/V s, approaching the theoretical scattering limit in semiconducting GNRs at room temperature. Especially, highly aligned GNR bundles with lengths up to a millimeter are also achieved by prepatterning a template, and the fabricated GNR bundle FETs show a high on/off ratio reaching 105, well-defined saturation currents, and strong light-emitting properties. Therefore, GNRs produced by this method open a door for promising applications in graphene-based electronics and optoelectronics.

Effect of ultrasonication time on microstructure, thermal conductivity, and viscosity of ionanofluids with originally ultra-long multi-walled carbon nanotubes

The stability along with thermal and rheological characteristics of ionanofluids (INFs) profoundly depend on the protocol of preparation. Therefore, in this work, the effect of ultrasonication time on microstructure, thermal conductivity, and viscosity of INFs containing 0.2 wt% of originally ultra-long multi-walled carbon nanotubes (MWCNTs) and four different ILs, namely 1-propyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, 1-ethyl-3-methylimidazolium thiocyanate, or 1-ethyl-3-methylimidazolium tricyanomethanide, was studied. The INFs were obtained by a two-step method using an ultrasonic probe. The ultrasonication process was performed for 1, 3, 10, or 30 min at a constant nominal power value of 200 W. The obtained results showed that for the shortest sonication time, the highest thermal conductivity enhancement of 12% was obtained. The extended sonication time from 1 to 30 min caused the cutting of MWCNTs and breaking the nanoparticle clusters, leading to a decrease in the average length of the nanotube bundles by approx. 70%. This resulted in a decline in thermal conductivity even by 7.2% and small deviations from the Newtonian behavior of INFs.

Super-Resolution Imaging with Graphene

Super-resolution optical imaging is a consistent research hotspot for promoting studies in nanotechnology and biotechnology due to its capability of overcoming the diffraction limit, which is an intrinsic obstacle in pursuing higher resolution for conventional microscopy techniques. In the past few decades, a great number of techniques in this research domain have been theoretically proposed and experimentally demonstrated. Graphene, a special two-dimensional material, has become the most meritorious candidate and attracted incredible attention in high-resolution imaging domain due to its distinctive properties. In this article, the working principle of graphene-assisted imaging devices is summarized, and recent advances of super-resolution optical imaging based on graphene are reviewed for both near-field and far-field applications.

Graphene, Graphene-Derivatives and Composites: Fundamentals, Synthesis Approaches to Applications

Graphene has accomplished huge notoriety and interest from the universe of science considering its exceptional mechanical physical and thermal properties. Graphene is an allotrope of carbon having one atom thick size and planar sheets thickly stuffed in a lattice structure resembling a honeycomb structure. Numerous methods to prepare graphene have been created throughout a limited span of time. Due to its fascinating properties, it has found some extensive applications to a wide variety of fields. So, we believe there is a necessity to produce a document of the outstanding methods and some of the novel applications of graphene. This article centres around the strategies to orchestrate graphene and its applications in an attempt to sum up the advancements that has taken place in the research of graphene.

Fluorine-Decorated Graphene Nanoribbons for an Anticorrosive Polymer Electrolyte Membrane Fuel Cell

Pt-supported carbon material-based electrocatalysts are formidably suffering from carbon corrosion when H₂O and O₂ molecules are present at high voltages in polymer electrolyte membrane fuel cells (PEMFCs). In this study, we discovered that the edge site of a fluorine-doped graphene nanoribbon (F-GNR) was slightly adsorbed with H₂O and was thermodynamically unfavorable with O atoms after defining the thermodynamically stable structure of the F-GNR from DFT calculations. Based on computational predictions, the physicochemical and electrochemical properties of F-GNRs with/without Pt nanoparticles derived from a modified Hummer's method and the polyol process were investigated as support materials for electrocatalysts and additives in the cathode of a PEMFC, respectively. The Pt/F-GNR showed the lowest degradation rate in carbon corrosion and was effective in the cathode as additives, resulting from the enhanced carbon corrosion durability owing to the improved structural stability and water management. Notably, the F-GNR with highly stable carbon corrosion contributed to achieving a more durable PEMFC for long-term operation.

One-dimensional graphene for efficient aqueous heavy metal adsorption: Rapid removal of arsenic and mercury ions by graphene oxide nanoribbons (GONRs)

There is a knowledge gap for the application of one-dimensional graphene in the adsorption process. Our hypothesis was based on the fact that graphene oxide nanoribbons (GONRs) as one-dimensional graphene with more desired edges and specific surface area than other carbonaceous nanomaterials have more oxygen containing functional groups (active sites) on their edges and basal planes and therefore are more capable in adsorption of pollutants. In this regard, we synthesized GONRs by unzipping of multi-walled carbon nanotubes (MWCNTs) and investigated the adsorption behavior of GONRs by ultrasonic-assisted adsorptive removal of As(V) and Hg(II) ions from aqueous solution. The obtained results showed that As(V) ions are more favorably adsorbed onto the GONRs than Hg(II) ions and with increasing initial As(V) and Hg(II) ions concentration to 300 ppm, the equilibrium adsorption uptake of the synthesized GONRs increases to 155.61 and 33.02 mg/g for As(V) and Hg(II) ions, respectively through a rapid separation process in just 12 min. Also, three kinetic models and Freundlich and Langmuir adsorption isotherms were applied to evaluate the obtained experimental results. Our findings highlight the potential application of GONRs as one-dimensional graphene adsorbent with more desired edges than MWCNTs and graphene oxide (GO) and high adsorption capacity for selective removal of heavy metals.

Dendritic Cell-Inspired Designed Architectures toward Highly Efficient Electrocatalysts for Nitrate Reduction Reaction

Electrocatalysis for nitrate reduction reaction (NRR) has recently been recognized as a promising technology to convert nitrate to nitrogen. Catalyst support plays an important role in electrocatalytic process. Although porous carbon and metal oxides are considered as common supports for metal-based catalysts, fabrication of such architecture with high electric conductivity, uniform dispersion of nanoparticles, and long-term catalytic stability through a simple and feasible approach still remains a significant challenge. Herein, inspired by the signal transfer mode of dendritic cell, an all-carbon dendritic cell-like (DCL) architecture comprising mesoporous carbon spheres (MCS) connected by tethered carbon nanotubes (CNTs) with CuPd nanoparticles dispersed throughout (CuPd@DCL-MCS/CNTs) is reported. An impressive removal capacity as high as 22 500 mg N g^-1 CuPd (≈12 times superior to Fe-based catalysts), high nitrate conversion (>95%) and nitrogen selectivity (>95%) are achieved under a low initial concentration of nitrate (100 mg L^-1 ) when using an optimized-NRR electrocatalyst (4CuPd@DCL-MCS/CNTs). Remarkably, nitrate conversion and nitrogen selectivity are both close to 100% in an ultralow concentration of 10 mg L^-1 , meeting drinking water standard. The present work not only provides high electrocatalytic performance for NRR but also introduces new inspiration for the preparation of other DCL-based architectures.

Biomimetic carbon nanotubes for neurological disease therapeutics as inherent medication

Nowadays, nanotechnology is revolutionizing the approaches to different fields from manufacture to health. Carbon nanotubes (CNTs) as promising candidates in nanomedicine have great potentials in developing novel entities for central nervous system pathologies, due to their excellent physicochemical properties and ability to interface with neurons and neuronal circuits. However, most of the studies mainly focused on the drug delivery and bioimaging applications of CNTs, while neglect their application prospects as therapeutic drugs themselves. At present, the relevant reviews are not available yet. Herein we summarized the latest advances on the biomedical and therapeutic applications of CNTs in vitro and in vivo for neurological diseases treatments as inherent therapeutic drugs. The biological mechanisms of CNTs-mediated bio-medical effects and potential toxicity of CNTs were also intensely discussed. It is expected that CNTs will exploit further neurological applications on disease therapy in the near future.

Voltammetric Detection of Caffeine in Beverages at Nafion/Graphite Nanoplatelets Layer-by-Layer Films

We report for the first time a procedure in which Nafion/Graphite nanoplatelets (GNPs) thin films are fabricated using a modified layer-by-layer (LbL) method. The method consists of dipping a substrate (quartz and/or glassy carbon electrodes) into a composite solution made of Nafion and GNPs dissolved together in ethanol, followed by washing steps in water. This procedure allowed the fabrication of multilayer films of (Nafion/GNPs)n by means of hydrogen bonding and hydrophobic‒hydrophobic interactions between Nafion, GNPs, and the corresponding solid substrate. The average thickness of each layer evaluated using profilometer corresponds to ca. 50 nm. The as-prepared Nafion/GNPs LbL films were characterized using various spectroscopic techniques such as X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), FTIR, and optical microscopy. This characterization highlights the presence of oxygen functionalities that support a mechanism of self-assembly via hydrogen bonding interactions, along with hydrophobic interactions between the carbon groups of GNPs and the Teflon-like (carbon‒fluorine backbone) of Nafion. We showed that Nafion/GNPs LbL films can be deposited onto glassy carbon electrodes and utilized for the voltammetric detection of caffeine in beverages. The results showed that Nafion/GNPs LbL films can achieve a limit of detection for caffeine (LoD) of 0.032 μM and linear range between 20‒250 μM using differential pulse voltammetry, whereas, using cyclic voltammetry LoD and linear range were found to be 24 μM and 50‒5000 μM, respectively. Voltammetric detection of caffeine in beverages showed good agreement between the values found experimentally and those reported by the beverage producers. The values found are also in agreement with those obtained using a standard spectrophotometric method. The proposed method is appealing because it allows the fabrication of Nafion/GNPs thin films in a simple fashion using a single-step procedure, rather than using composite solutions with opposite electrostatic charge, and also allows the detection of caffeine in beverages without any pre-treatment or dilution of the real samples. The proposed method is characterized by a fast response time without apparent interference, and the results were competitive with those obtained with other materials reported in the literature.

A Simple Method for Removal of Carbon Nanotubes from Wastewater Using Hypochlorite

Carbon nanotubes (CNTs) have been applied in a wide range of fields, such as materials, electronics, energy storages, and biomedicine. With the rapid increase in CNTs industrialization, more and more CNT-containing wastewater is being produced. Since concerns about the toxic effects of CNTs on human health persist, CNT-containing wastewater should not be released into the environment without purification, but no effective methods have been reported. In the present study, we report a simple method to eliminate CNTs from industrial or laboratorial wastewater using sodium hypochlorite. Direct treatment of aqueous dispersions with sodium hypochlorite solution completely degraded CNTs into carbon oxides or carbonates ions. Since hypochlorite is environmentally friendly and frequently used as a disinfectant or bleaching agent in domestic cleaning, this method is practical for purification of CNT-contaminated industrial wastewater.

Selective carboxylation versus layer-by-layer unsheathing of multi-walled carbon nanotubes: new insights from the reaction with boiling nitrating mixture

We have studied the oxidation of multi-wall carbon nanotubes (MWCNTs) by boiling them in a nitrating mixture composed of conc. HNO₃/H₂SO₄ (v/v = 1/3). By analysis of the morphology and surface physicochemistry of the oxidation products as a function of MWCNT treatment time, we have revealed two interrelated phenomena. Firstly, the most outer walls were becoming more functionalized with carboxylic groups to the point of quasi-saturation where, secondly, oxidized MWCNTs could be desheathed uncovering the yet non-functionalized wall. These phenomena were manifested by the periodic-like nature of functionalization and de-functionalization. In the products of MWCNT oxidation – the number of graphitized MWCNT walls was determined by HR-TEM while quantification of oxygen functionalities was performed via Boehm titration. The above techniques coupled with the analysis of zeta potential and Raman spectroscopy allowed us to propose a pseudo-1^st order kinetic model for MWCNT oxidation translatable to other sp²-C allotropes. The findings mean that prolonged oxidation does not necessarily yield nanotubes of higher levels of functionalization. The final outcome is of great relevance in all fields of MWCNT applications from medicine to sensors to nanomaterials engineering.

Treatment of multi-walled carbon nanotubes (MWCNTs) with a boiling nitrating mixture proceeds via two interrelated phenomena, i.e. periodic-like carboxylation and layer-by-layer desheathing, and overall, it can be controlled by kinetics of the process.

Unveiling the Structure of MoS x Nanocrystals Produced upon Laser Fragmentation of MoS2 Platelets

Transition-metal dichalcogenide MoS₂ nanostructures have attracted tremendous attention due to their unique properties, which render them efficient nanoscale functional components for multiple applications ranging from sensors and biomedical probes to energy conversion and storage devices. However, despite the wide application range, the possibility to tune their size, shape, and composition is still a challenge. At the same time, the correlation of the structure with the optoelectronic properties is still unresolved. Here, we propose a new method to synthesize various morphologies of molybdenum sulfide nanocrystals, on the basis of ultrashort-pulsed laser fragmentation of MoS₂ platelets. Depending on the irradiation conditions, multiple MoS _x morphologies in the form of nanoribbons, nanospheres, and photoluminescent quantum dots are obtained. Besides the detailed structural analysis of the various crystals formed, the structure-property relation is investigated and discussed.

Edge-Functionalized Graphene Nanoribbon Chemical Sensor: Comparison with Carbon Nanotube and Graphene

With growing focus on the use of carbon nanomaterials in chemical sensors, one-dimensional graphene nanoribbon (GNR) has become one of the most attractive channel materials, owing to its enhanced conductance fluctuation by quantum confinement effects and dense, abundant edge sites. Due to the narrow width of a basal plane with one-dimensional morphology, chemical modification of edge sites would greatly affect the electrical channel properties of a GNR. Here, we demonstrate for the first time that chemically functionalizing the edge sites with aminopropylsilane (APS) molecules can significantly enhance the sensing performance of the GNR sensor. The resulting APS-functionalized GNR has a sensitivity ((Δ R/ R_b)_max) of ∼30% at 0.125 ppm nitrogen dioxide (NO₂) and an ultrafast response time (∼6 s), which are, respectively, 7- and 15-fold enhancements compared to a pristine GNR sensor. This is the fastest and most sensitive gas-sensing performance of all GNR sensors reported. To demonstrate the superiority of the GNR-APS sensor, we compare its sensing performance with that of APS-functionalized carbon nanotube (CNT) and reduced graphene oxide (rGO) sensors prepared in identical synthesis conditions. Very interestingly, the GNR-APS sensor exhibited 30- and 93-fold enhanced sensitivity compared to the CNT-APS and rGO-APS sensors. This might be attributed to highly active edge sites with superior chemical reactivity, which are not present in CNT and rGO materials. Density functional theory clearly shows that the greatly enhanced gas response of GNR with edge functionalization can be attributed to the higher electron densities in the highest occupied molecular orbital levels of GNR-APS and incorporation of additional adsorption sites. This finding is the first demonstration of the importance of edge functionalization of GNR for chemical sensors.

Unravelling the Role of Topological Defects on Catalytic Unzipping of Single-Walled Carbon Nanotubes by Single Transition Metal Atom

Catalytic unzipping of single-walled carbon nanotubes (SWCNTs) has been experimentally shown to be a viable method to produce graphene nanoribbons (GNRs) with clean and smooth edges for advanced applications, while topological defects (TDs) are inevitably presented in mass produced CNTs (especially the tube end/cap), which may affect the catalytic unzipping. Herein, we theoretically investigate the roles of TDs on the catalytic unzipping of SWCNTs by a single Fe atom in the H₂ environment. Our computation shows that the threshold reaction barriers to the catalytic SWCNT unzipping can be notably reduced by ∼20%-40%, resulting from weakened and elongated local C-C bonds associated with TDs. The curvature energy of a SWCNT released during the unzipping can support the continuous unzipping and enable the chirality- and diameter-dependent unzipping. The important roles of H₂ are also identified. The suggested tear-from-end-defect mechanism can markedly improve the controllability of the catalytic unzipping of SWCNTs.