Polymer Nanogels as Reservoirs To Inhibit Hydrophobic Drug Crystallization

Hydrogel Nanoparticles Enable Nucleation Barrier Regulation and Ion Anchoring as an Alternative Pathway for Monosodium Urate Monohydrate Crystallization Control

Gout flare-up, commonly resulting from monosodium urate monohydrate (MSUM) crystallization, has led to painful inflammatory arthritis among hundreds of millions of people. Herein, a kind of hydrogel nanoparticles (HNPs) with specific properties was developed, aimed at providing a promising pathway for MSUM crystallization control. The experimental and molecular dynamics simulation results synchronously indicate that the fabricated HNPs achieve efficient inhibition of MSUM crystallization governed by the mechanism of "host-guest interaction" even under very low-dose administration. HNPs as the host dispersed in the hyperuricemic model effectively lift the relative heterogeneous nucleation barrier of the MSUM crystal and hinder solute aggregation with strong electronegativity and hydrophobicity. The initial appearance of MSUM crystals was then delayed from 94 to 334 h. HNPs as the guest on the surface of the formed crystal can decelerate the growth rate by anchoring ions and occupying the active sites on the surface, and the terminal yield of the MSUM crystal declined to less than 1% of the control group. The good biocompatibility of HNPs (cell viability > 94%) renders it possible for future clinical applications. This study can guide the rational design of inhibitory nanomaterials and the development of their application in the control of relevant pathological crystallization.

Drug-Polymer Nanodroplet Formation and Morphology Drive Solubility Enhancement of GDC-0810

Nanodroplet formation is important to achieve supersaturation of active pharmaceutical ingredients (APIs) in an amorphous solid dispersion. The aim of the current study was to explore how polymer composition, architecture, molar mass, and surfactant concentration affect polymer-drug nanodroplet morphology with the breast cancer API, GDC-0810. The impact of nanodroplet size and morphology on dissolution efficacy and drug loading capacity was explored using polarized light microscopy, dynamic light scattering, and cryogenic transmission electron microscopy. Poly(N-isopropylacrylamide-stat-N,N-dimethylacrylamide) (PND) was synthesized as two linear derivatives and two bottlebrush derivatives with carboxylated or PEGylated end-groups. Hydroxypropyl methylcellulose acetate succinate grade MF (HPMCAS-MF) and poly(vinylpyrrolidone-co-vinyl acetate) (PVPVA) were included as commercial polymer controls. We report the first copolymerization synthesis of a PVPVA bottlebrush copolymer, which was the highest performing excipient in this study, maintaining 688 μg/mL GDC-0810 concentration at 60 wt % drug loading. This is likely due to strong polymer-drug noncovalent interactions and the compaction of GDC-0810 along the PVPVA bottlebrush backbone. Overall, it was observed that the most effective formulations had a hydrodynamic radius less than 25 nm with tightly compacted nanodroplet morphologies.

Hydrogen Bonding Principle-Based Molecular Design of a Polymer Excipient and Impacts on Hydrophobic Drug Properties: Molecular Simulation and Experiment

Although some commercial excipients for improving the solubility of highly crystalline drugs are widely used, they still cannot cover all types of hydrophobic drugs. In this regard, with phenytoin as the target drug, related molecular structures of polymer excipients were designed. The optimal repeating units of NiPAm and HEAm were screened out through quantum mechanical simulation and Monte Carlo simulation methods, and the copolymerization ratio was also determined. Using molecular dynamics simulation technology, it was confirmed that the dispersibility and intermolecular hydrogen bonds of phenytoin in the designed copolymer were better than those in the commercial PVP materials. At the same time, the designed copolymers and solid dispersions were also prepared during the experiment, and the improvement of their solubility was confirmed, which is in accordance with the simulation predictions. The new ideas and simulation technology may be used for drug modification and development.

Tuning Surface Plasmon Resonance Responses through Size and Crosslinking Control of Multivalent Protein Binding-Capable Nanoscale Hydrogels

Surface plasmon resonance (SPR) phenomena have been widely studied to detect biomolecules because of their high sensitivity and ability to determine biomolecular interactions with kinetic information. However, highly selective detection in specific concentration ranges relevant to target biomolecules is still a challenging task. Recently, we developed bioresponsive nanoscale hydrogels to selectively intensify SPR signals through multivalent protein binding (MPB) events with target biomolecules, including IL-2, where we were able to demonstrate exceptional selectivity for target biomolecules with minimal responses to nonspecific and monovalent binding events. In this work, we systematically explored the relationship between the physical properties of MPB-capable nanoscale hydrogels and their SPR response induced in the presence of the programmed cell death protein 1 antibody (PD-1Ab) as a model target biomolecule. First, we developed a synthetic protocol by controlling various reaction parameters to construct a library of nanoscale poly(N-isopropylacrylamide-co-acrylic acid) hydrogels (NHs) with different sizes (from 400 nm to 1 μm) and degrees of crosslinking (from 2 to 8%). Then, by incorporating MPB-capable PD-1 receptors onto the surface of NHs to form PD-1-responsive nanoscale hydrogels (PNHs), the hydrogel size and crosslinking dependency of their SPR responses were investigated. Our results reveal the appropriate hydrogel size regime and degree of crosslinking for effective PD-1Ab detection at specific concentrations range between a few nM and 1 μM. Overall, our study demonstrates that by tuning the physical properties of the nanoscale hydrogel matrix, the sensitivity and detection range of MPB-based SPR sensors can be modulated to potentially benefit clinical applications such as monitoring diverse therapeutic biomolecules.

Recent Advances in Enhancement of Dissolution and Supersaturation of Poorly Water-Soluble Drug in Amorphous Pharmaceutical Solids: A Review

Amorphization is one of the most effective pharmaceutical approaches to enhance the dissolution and oral bioavailability of poorly water-soluble drugs. In recent years, amorphous formulations have been experiencing rapid development both in theoretical and practical application. Based on using different types of stabilizing agents, amorphous formulations can be mainly classified as polymer-based amorphous solid dispersion, coamorphous formulation, mesoporous silica-based amorphous formulation, etc. This paper summarizes recent advances in the dissolution and supersaturation of these amorphous formulations. Moreover, we also highlight the roles of stabilizing agents such as polymers, low molecular weight co-formers, and mesoporous silica. Maintaining supersaturation in solution is a key factor for the enhancement of dissolution profile and oral bioavailability, and thus, the strategies and challenges for maintaining supersaturation are also discussed. With an in-depth understanding of the inherent mechanisms of dissolution behaviors, the design of amorphous pharmaceutical formulations will become more scientific and reasonable, leading to vigorous development of commercial amorphous drug products.

Computational Reverse Engineering Analysis for Scattering Experiments (CREASE) on Vesicles Assembled from Amphiphilic Macromolecular Solutions

In this paper we present the development and validation of the "Computational Reverse-Engineering Analysis for Scattering Experiments" (CREASE) method for analyzing scattering results from vesicle structures that are commonly found upon assembly of synthetic, biomimetic, or bioderived amphiphilic copolymers in solution. The two-step CREASE method takes the amphiphilic polymer chemistry and small-angle scattering intensity profile, I exp(q), as input and determines the vesicles' structural features on multiple length scales ranging from assembled vesicle wall's individual layer thicknesses to the monomer-level packing and distribution of polymer conformations. In the first step of CREASE, a genetic algorithm (GA) is used to determine the relevant vesicle dimensions from the input macromolecular solution information and I exp(q) by identifying the structure whose computed scattering profile best matches the input I exp(q). Then in the second step, the GA-determined dimensions are used for molecular reconstruction of the vesicle structure. To validate CREASE for vesicles, we test CREASE on input scattering intensity profiles generated mathematically (termed as in silico I exp(q) vs q) from a variety of vesicle sizes with known dimensions. We also test CREASE on in silico I exp(q) vs q generated from vesicles with dispersity in all relevant dimensions, resembling real experiments. After successful validation of CREASE, we compare the CREASE-determined dimensions against those obtained from the traditional approach of fitting the scattering intensity profile to relevant analytical model in SASVIEW package. We show that CREASE performs better than or as well as the core-multishell analytical model's fitting in SASVIEW in determining vesicle dimensions with dispersity. We also show that CREASE provides structural information beyond those possible from traditional scattering analysis using the core-multishell model, such as the distribution of solvophilic monomers between the vesicle wall's inner and outer layers in the vesicle wall and the chain-level packing within each vesicle layer.

Design and Applications of Tumor Microenvironment-Responsive Nanogels as Drug Carriers

In recent years, the exploration of tumor microenvironment has provided a new approach for tumor treatment. More and more researches are devoted to designing tumor microenvironment-responsive nanogels loaded with therapeutic drugs. Compared with other drug carriers, nanogel has shown great potential in improving the effect of chemotherapy, which is attributed to its stable size, superior hydrophilicity, excellent biocompatibility, and responsiveness to specific environment. This review primarily summarizes the common preparation techniques of nanogels (such as free radical polymerization, covalent cross-linking, and physical self-assembly) and loading ways of drug in nanogels (including physical encapsulation and chemical coupling) as well as the controlled drug release behaviors. Furthermore, the difficulties and prospects of nanogels as drug carriers are also briefly described.

Role of Permeability on the Biopredictive Dissolution of Amorphous Solid Dispersions

An ideal dissolution test for amorphous solid dispersions (ASDs) should reflect physicochemical, physiological, and hydrodynamic conditions which accurately represent in vivo dissolution. However, this is confounded by the evolution of different molecular and colloidal species during dissolution, generating a supersaturated state of the drug. The supersaturated state of a drug is thermodynamically unstable which drives the process of precipitation resulting in a loss of solubility advantage. Maintaining a supersaturated state of the drug with the help of precipitation inhibiting excipients is a key component in the design of ASDs. Therefore, a biopredictive dissolution test is critical for proper risk assessment during the development of an optimal ASD formulation. One of the overlooked components of biopredictive dissolution is the role of drug permeability. The kinetic changes in the phase behavior of a drug during dissolution of ASDs are influenced by drug permeability across a membrane. Conventionally, drug dissolution and permeation are analyzed separately although they occur simultaneously in vivo. The kinetic phase changes occurring during dissolution of ASDs can influence the thermodynamic activity and membrane flux of a drug. The present review evaluates the feasibility, predictability, and practicability of permeability/dissolution for the optimal development and risk assessment of ASD formulations.

Drug-Rich Phases Induced by Amorphous Solid Dispersion: Arbitrary or Intentional Goal in Oral Drug Delivery?

Among many methods to mitigate the solubility limitations of drug compounds, amorphous solid dispersion (ASD) is considered to be one of the most promising strategies to enhance the dissolution and bioavailability of poorly water-soluble drugs. The enhancement of ASD in the oral absorption of drugs has been mainly attributed to the high apparent drug solubility during the dissolution. In the last decade, with the implementations of new knowledge and advanced analytical techniques, a drug-rich transient metastable phase was frequently highlighted within the supersaturation stage of the ASD dissolution. The extended drug absorption and bioavailability enhancement may be attributed to the metastability of such drug-rich phases. In this paper, we have reviewed (i) the possible theory behind the formation and stabilization of such metastable drug-rich phases, with a focus on non-classical nucleation; (ii) the additional benefits of the ASD-induced drug-rich phases for bioavailability enhancements. It is envisaged that a greater understanding of the non-classical nucleation theory and its application on the ASD design might accelerate the drug product development process in the future.

Bottlebrush Polymer Excipients Enhance Drug Solubility: Influence of End-Group Hydrophilicity and Thermoresponsiveness

Bottlebrush polymers have great potential as vehicles to noncovalently sequester, stabilize, and deliver hydrophobic small molecule actives. To this end, we synthesized a poly(N-isopropylacrylamide-stat-N,N-dimethylacrylamide) bottlebrush copolymer using ring-opening metathesis polymerization and developed a facile method to control the thermoresponsive properties using postpolymerization modification. Six increasingly hydrophilic end-groups were installed, yielding cloud point temperature control over a range of 22-42 °C. Solubility enhancement of the antiseizure medication, phenytoin, increased significantly with the hydrophilicity of the end-group moiety. Notably, carboxylated bottlebrush copolymers solubilized formulations with higher drug loadings than linear copolymers because they exist as unimolecular nanoparticles with a synthetically defined density of polymer chains that are more stable in solution. This work provides the first investigation of bottlebrush polymers for hydrophobic noncovalent sequestration and solubilization of pharmaceuticals.

"Smart" Polymer Nanogels as Pharmaceutical Carriers: A Versatile Platform for Programmed Delivery and Diagnostics

"Smart" polymeric nanoformulations are evolving as a promising therapeutic, diagnostic paradigm. The polymeric nanovehicles demonstrated excellent capability to encapsulate theranostic cargos and their successful delivery in physiological conditions and even to monitor the therapeutic response. Currently, polymer nanogels (NGs) are established as capable carriers toward triggered delivery of diverse therapeutic and diagnostic agents. Notably, biodegradable and "intelligent" NGs constructed from intelligent polymers are highly beneficial because of their responsiveness toward endogenous as well as exogenous stimuli like pH gradients, bioresponsiveness, photoresponsiveness, temperature, and so on. In the past decade, plenty of multifunctional NGs with excellent targetability and sensitivity were reported for a wide range of theragnostic applications. This mini-review briefly propounds the synthesis strategies of "smart" NGs and summarizes the notable applications like delivery of genetic materials, anticancer agents, photodynamic/photothermal therapies, imaging, and biosensing. Herein, we have also addressed the current clinical status of NGs and the major challenges that are essential to overcome for the further advancement of NGs for specific applications.

Microenvironment-Triggered Degradable Hydrogel for Imaging Diagnosis and Combined Treatment of Intraocular Choroidal Melanoma

Human choroidal melanoma (HCM) is one of the most common primary intraocular tumors and easily provokes liver metastases owing to the lack of sensitive and noninvasive therapeutic methods. Concerning the imaging diagnostics and therapeutic predicaments for choroidal melanoma, we designed microenvironment-triggered degradable hydrogels (RENP-ICG@PNIPAM:Dox-FA) based on ultrasmall (<5 nm) rare-earth nanoparticles (RENPs) with enhanced NIR-II luminescence. The ultrasmall diameter can significantly enhance the NIR-II luminescence performance of RENPs. RENPs were encapsulated by a dual-response PNIPAM hydrogel, which could release drug by responding to heat energy and glutathione under the tumor microenvironment. The in vitro/in vivo NIR-II imaging detection and antitumor activity were also compared systematically after different treatment conditions on ocular choroidal melanoma-1 cells and tumor-bearing mice, respectively. Besides, the degradability of the hydrogel composites under physiological conditions could be conducive to enhance the photothermal-chemotherapeutic effect and alleviate long-term biological toxicity. Our work on the microenvironment-triggered hydrogels with enhanced NIR imaging and easy metabolism may provide a promising strategy for sensitive and noninvasive imaging and phototherapy in ocular tumors.

Role of Polymer Excipients in the Kinetic Stabilization of Drug-Rich Nanoparticles

Amorphous solid dispersions (ASDs) of crystallizable drugs and polymer excipients are attractive for enhancing the solubility and bioavailability of hydrophobic drug molecules. In this study, the solution behavior of poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) (PND) and poly(vinylpyrrolidone-co-vinylacetate) (PVPVA), as polymer excipients, and nilutamide (NLT), phenytoin (PHY), and itraconazole (ITN) as model drugs, were monitored by an in vitro dissolution assay, small-angle X-ray scattering (SAXS), dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryo-TEM), and polarized optical microscopy (POM). High degrees of drug supersaturation were coincident with the formation of amorphous nanoparticles in each system. The difference in particle size and kinetic stability between PND and PVPVA systems suggest a difference in how the polymers interact with the drug-rich phase. A series of scenarios are proposed based on whether the polymer interacts more strongly with the drug-rich nanoparticles or with water. Understanding the contribution of drug-rich nanoparticles to achievable supersaturation and the effect of polymer excipients on these particles will inform the design of future solid dispersion systems through a better understanding of the polymer/drug solution relationship.

Aggregated Solution Morphology of Poly(acrylic acid)-Poly(styrene) Block Copolymers Improves Drug Supersaturation Maintenance and Caco-2 Cell Membrane Permeation

Amorphous solid dispersions of polymers and drugs have been shown to improve supersaturation maintenance of poorly water-soluble drugs. Herein, amorphous spray-dried dispersions (SDDs) of poly(acrylic acid)-polystyrene (PS-b-PAA) diblock copolymers with differing degrees of polymerization were prepared in aggregated and nonaggregated states with the Biopharmaceutical Classification System Class II drug, probucol (PBC). Specifically, PS₉₀-b-PAA₁₅, PS₉₀-b-PAA₈₀, PS₃₈-b-PAA₂₂₀, and PS₃₈-b-PAA₃₂₀ amphiphilic block polymers that covered a compositional range in the area of oral drug delivery were prepared to examine the role of molecular weight and controlled aggregation in promoting drug supersaturation and maintenance. In addition, hydrophilic homopolymers PAA₂₀, PAA₉₆, PAA₂₂₆, and PAA₃₉₂ were prepared as controls to evaluate the role of the block copolymer-based SDDs in PBC solubilization. Characterization such as powder X-ray diffraction, scanning electron microscopy, and dissolution tests under nonsink conditions were then performed to evaluate the SDDs. When comparing the block copolymer systems, polymers that were preaggregated into micellular structures prior to spray drying with the drug promoted higher drug solubility and maintenance than when the drug was formulated with molecularly dissolved PS-PAA block polymer. Interestingly, the aggregated PS₉₀-b-PAA₈₀ SDD with 25 wt % PBC achieved 100% burst release and maintained full supersaturation of PBC at pH 6.5 (physiological pH in the small intestine). Dissolution studies conducted at the pH of the stomach (pH = 1.2) show that a minimal amount of drug (∼10 μg/mL) was released, which could be used for protecting drugs from acidic environments (stomach) before reaching the small intestine. To evaluate drug bioavailability, in vitro Caco-2 cell assays were performed, which reveal that PAA-based excipients do not hinder drug permeation across the epithelial membrane and that PS₉₀-b-PAA₈₀ SDD with 25 wt % PBC achieved the highest membrane permeability coefficient. This work demonstrates that block copolymer-based SDDs capable of preaggregating into nanostructures may be a tunable drug-delivery platform that can improve solubility and supersaturation maintenance of Class II pharmaceutics while also not prohibiting bioavailability through model intestinal membranes. Indeed, this concept may be extended to accommodate a myriad of pharmaceutical and excipient structures.

Recent Advances in Understanding the Micro- and Nanoscale Phenomena of Amorphous Solid Dispersions

Many pharmaceutical drugs in the marketplace and discovery pipeline suffer from poor aqueous solubility, thereby limiting their effectiveness for oral delivery. The use of an amorphous solid dispersion (ASD), a mixture of an active pharmaceutical ingredient and a polymer excipient, greatly enhances the aqueous dissolution performance of a drug without the need for chemical modification. Although this method is versatile and scalable, deficient understanding of the interactions between drugs and polymers inhibits ASD rational design. This current Review details recent progress in understanding the mechanisms that control ASD performance. In the solid-state, the use of high-resolution theoretical, computational, and experimental tools resolved the influence of drug/polymer phase behavior and dynamics on stability during storage. During dissolution in aqueous media, novel characterization methods revealed that ASDs can form complex nanostructures, which maintain and improve supersaturation of the drug. The studies discussed here illustrate that nanoscale phenomena, which have been directly observed and quantified, strongly affect the stability and bioavailability of ASD systems, and provide a promising direction for optimizing drug/polymer formulations.