High-Performance All-Inorganic CsPbCl3 Perovskite Nanocrystal Photodetectors with Superior Stability

Overcoming Debye screening effect in field-effect transistors for enhanced biomarker detection sensitivity

Field-effect transistor (FET)-based biosensors not only enable label-free detection by measuring the intrinsic charges of biomolecules, but also offer advantages such as high sensitivity, rapid response, and ease of integration. This enables them to play a significant role in disease diagnosis, point-of-care detection, and drug screening, among other applications. However, when FET sensors detect biomolecules in physiological solutions (such as whole blood, serum, etc.), the charged molecules will be surrounded by oppositely charged ions in the solution. This causes the effective charge carried by the biomolecules to be shielded, thereby significantly weakening their ability to induce charge rearrangement at the sensing interface. Such shielding hinders the change of carriers inside the sensing material, reduces the variation of current between the source and drain electrodes of the FET, and seriously limits the sensitivity and reliability of the device. In this article, we summarize the research progress in overcoming the Debye screening effect in FET-based biosensors over the past decade. Here, we first elucidate the working principles of FET sensors for detecting biomarkers and the mechanism of the Debye screening. Subsequently, we emphasize optimization strategies to overcome the Debye screening effect. Finally, we summarize and provide an outlook on the research on FET biosensors in overcoming the Debye screening effect, hoping to help the development of FET electronic devices with high sensitivity, specificity, and stability. This work is expected to provide new ideas for next-generation biosensing technology.

Solution mediated halide exchange engineering for the fabrication of a thick CsPbCl3 film and its application in photovoltaics with outstanding performance

It is a big challenge to prepare thick CsPbCl3 films using traditional solution processed approaches owing to the low solubility of precursors of PbCl2 and CsCl in common solvents. Here, we propose an indirect solution process to prepare thick CsPbCl3 films. In this new approach, a mother film of CsPbBr3 is first prepared through a solution process, and then it is dipped into a diluted HCl/methanol solution. During the dipping process, it triggers a halide exchange reaction between Br- and Cl-, and it eventually produces a thick CsPbCl3 film (∼400 nm) with high quality and purity. Afterwards, a carbon based hole transportation layer (HTL) free solar cell with a configuration of FTO/TiO2/CsPbCl3/carbon is constructed, and it delivers an average PCE of 1.23% and an outstanding PCE of 1.39% in a batch of PSCs. Meanwhile, the solar cell maintains its 82% initial PCE after storage in open air for 31 days. This work overcomes the obstacle of the traditional solution approach for the preparation of CsPbCl3 films, which makes it promising for preparing various CsPbCl3 film-based devices via a solution process.

Red-Emitting CsPbI3/ZnSe Colloidal Nanoheterostructures with Enhanced Optical Properties and Stability

Producing heterostructures of cesium lead halide perovskites and metal-chalcogenides in the form of colloidal nanocrystals can improve their optical features and stability, and also govern the recombination of charge carriers. Herein, the synthesis of red-emitting CsPbI3/ZnSe nanoheterostructures is reported via an in situ hot injection method, which provides the crystallization conditions for both components, subsequently leading to heteroepitaxial growth. Steady-state absorption and photoluminescence studies alongside X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy analysis evidence on a type-I band alignment for CsPbI3/ZnSe nanoheterostructures, which exhibit photoluminescence quantum yield of 96% due to the effective passivation of surface defects, and an enhancement in carrier lifetime. Furthermore, the heterostructure growth of ZnSe domains leads to significant improvement in the stability of the CsPbI3 nanocrystals under ambient conditions and against thermal and UV irradiation stress.

Highly Bright and Stable CsPbX3@Cs4PbX6 Hexagonal Nanoarchitectonics Created by Controlling Dissolution-Recrystallization of CsPbX3 Nanomaterials

CsPbBr3@Cs4PbBr6 hexagonal NCs with a bright photoluminescence (PL) peak of 456 nm are created through the dissolution-recrystallization of CsPbBr3 nanoplatelets. Small CsPbBr3 nanocrystals are encapsulated in hexagonal Cs4PbBr6 during recrystallization to form a core-shell structure and keep high brightness and stability. The recrystallization kinetics is systematically investigated to explore the roles of methyl acetate, oleylamine, and n-hexane. Result further indicates that core/shell NCs remained high PL under a variety of harsh conditions (e.g., light irradiation and heat treatment) because of Cs4PbX6 shell and the controlling of recrystallization. Their initial PL intensity is remained after 4 months of storage under ambient conditions and continuous exposure to UV lamp for 180 min. The bright PL is also maintained even treatment at 120 °C. To indicate the universality of this synthesis method, CsPbX3@Cs4PbX6 hexagonal NCs with different emission colors are fabricated by changing temperature, solvent viscosity, and precursors (e,g, oleylamine and halogens). These core-shell samples reveal bright and stable green, orange, and red PL. Because of its high stability, the core/shell NCs are dispersed in flexible films to create diverse patterns. The films also exhibit high brightness and excellent stability. This strategy opens a novel avenue for the application of perovskite nanomaterials in the display field.

High-Sensitivity and Fast-Response Photomultiplication Type Photodetectors Based on Quasi-2D Perovskite Films for Weak-Light Detection

Photovoltaic photodiodes often face challenges in effectively harvesting electrical signals, especially when detecting faint light. In contrast, photomultiplication type photodetectors (PM-PDs) are renowned for their exceptional sensitivity to weak signals. Here, an advanced PM-PD is introduced based on quasi 2D Ruddlesden-Popper (Q-2D RP) perovskites, optimized for weak light detection at minimal operating voltages. The abundant traps at the Q-2D RP surface capture charge carriers, inducing a trap-assisted tunneling mechanism that leads to the photomultiplication (PM) effect. Deep-lying trap states within the Q-2D RP bulk accelerate charge carrier recombination, resulting in an outstanding rise/fall time of 1.14/1.72 µs for the PM-PDs. The PM-PD achieves a remarkable response level of up to 45.89 A W-1 and an extraordinary external quantum efficiency of 14400% at -1 V under an illumination of 1 µW cm- 2. The intrinsic high resistance of the Q-2D perovskite results in a low dark current, enabling an impressive detectivity of 4.23 × 1012 Jones based on noise current at -1 V. Furthermore, the practical application of PM-PDs has been demonstrated in weak-light, high-rate communication systems. These findings confirm the significant potential of PM-PDs based on Q-2D perovskites for weak light detection and suggest new directions for developing low-power, high-performance PM-PDs for future applications.

Duffy Antigen Receptor for Chemokines (DARC) Nanodisc-Based Biosensor for Detection of Staphylococcal Bicomponent Pore-Forming Leukocidins

Staphylococcus aureus (S. aureus) is an opportunistic infectious pathogen, which causes a high mortality rate during bloodstream infections. The early detection of virulent strains in patients' blood samples is of medical interest for rapid diagnosis. The main virulent factors identified in patient isolates include leukocidins that bind to specific membrane receptors and lyse immune cells and erythrocytes. Duffy antigen receptor for chemokines (DARC) on the surface of specific cells is a main target of leukocidins such as gamma-hemolysin AB (HlgAB) and leukocidin ED (LukED). Among them, HlgAB is a conserved and critical leukocidin that binds to DARC and forms pores on the cell membranes, leading to cell lysis. Current methods are based on ELISA or bacterial culture, which takes hours to days. For detecting HlgAB with faster response and higher sensitivity, we developed a biosensor that combines single-walled carbon nanotube field effect transistors (swCNT-FETs) with immobilized DARC receptors as biosensing elements. DARC was purified from a bacterial expression system and successfully reconstituted into nanodiscs that preserve binding capability for HlgAB. Dynamic light scattering (DLS) and scanning electron microscopy (SEM) showed an increase of the DARC-containing nanodisc size in the presence of HlgAB, indicating the formation of HlgAB prepore or pore complexes. We demonstrate that this sensor can specifically detect the leukocidins HlgA and HlgAB in a quantitative manner within the dynamic range of 1 fM to 100 pM with an LOD of 0.122 fM and an LOQ of 0.441 fM. The sensor was challenged with human serum spiked with HlgAB as simulated clinical samples. After dilution for decreasing nonspecific binding, it selectively detected the toxin with a similar detection range and apparent dissociation constant as in the buffer. This biosensor was demonstrated with remarkable sensitivity to detect HlgAB rapidly and has the potential as a tool for fundamental research and clinical applications, although this sensor cannot differentiate between HlgAB and LukED as both have the same receptor.

Label-Free and Ultrasensitive Detection of Cartilage Acidic Protein 1 in Osteoarthritis Using a Single-Walled Carbon Nanotube Field-Effect Transistor Biosensor

Osteoarthritis (OA), a prevalent degenerative joint disease, significantly affects the well-being of afflicted individuals and compromises the standard functionality of human joints. The emerging biomarker, Cartilage acidic protein 1 (CRTAC1), intricately associates with OA initiation and serves as a prognostic indicator for the trajectory toward joint replacement. However, existing diagnostic methods for CRTAC1 are hampered by the limited abundance, thus restricting the precision and specificity. Herein, a novel approach utilizing a single-walled carbon nanotube field-effect transistor (SWCNTs FET) biosensor is reported for the direct label-free detection of CRTAC1. High-purity semiconducting carbon nanotube films, functionalized with antibodies of CRTAC1, provide excellent electrical and sensing properties. The SWCNTs FET biosensor exhibits high sensitivity, notable reproducibility, and a wide linear detection range (1 fg/mL to 100 ng/mL) for CRTAC1 with a theoretical limit of detection (LOD) of 0.2 fg/mL. Moreover, the SWCNTs FET biosensor is capable of directly detecting human serum samples, showing excellent sensing performance in differentiating clinical samples from OA patients and healthy populations. Comparative analysis with traditional enzyme-linked immunosorbent assay (ELISA) reveals that the proposed biosensor demonstrates faster detection speeds, higher sensitivity/accuracy, and lower errors, indicating high potential for the early OA diagnosis. Furthermore, the SWCNTs FET biosensor has good scalability for the combined diagnosis and measurement of multiple disease markers, thereby significantly expanding the application of SWCNTs FETs in biosensing and clinical diagnostics.

Visible-ultraviolet dual-band photodetectors based on an all-inorganic CsPbCl3/p-GaN heterostructure

All-inorganic metal halide perovskites (MHPs) have attracted increasing attention because of their high thermal stability and band gap tunability. Among them, CsPbCl3 is considered a promising semiconductor material for visible-ultraviolet dual-band photodetectors because of its excellent photoelectric properties and suitable band gap value. In this work, we fabricated a visible-ultraviolet dual-band photodetector based on a CsPbCl3/p-GaN heterojunction using the spin coating method. The formation of the heterojunction enables the device to exhibit obvious dual-band response behavior at positive and negative bias voltages. At the same time, the dark current of the device can be as low as 2.42 × 10-9 A, and the corresponding detection rate can reach 5.82 × 1010 Jones. In addition, through simulation calculations, it was found that the heterojunction has a type II energy band arrangement, and the heterojunction response band light absorption is significantly enhanced. The type II energy band arrangement will separate electron-hole pairs more effectively, which will help improve device performance. The successful implementation of visible-ultraviolet dual-band photodetectors based on a CsPbCl3/p-GaN heterojunction provides guidance for the application of all-inorganic MHPs in the field of multi-band photodetectors.

Cell membrane-coated nanoparticles for targeting carcinogenic bacteria

The etiology of cancers is multifactorial, with certain bacteria established as contributors to carcinogenesis. As the understanding of carcinogenic bacteria deepens, interest in cancer treatment through bacterial eradication is growing. Among emerging antibacterial platforms, cell membrane-coated nanoparticles (CNPs), constructed by enveloping synthetic substrates with natural cell membranes, exhibit significant promise in overcoming challenges encountered by traditional antibiotics. This article reviews recent advancements in developing CNPs for targeting carcinogenic bacteria. It first summarizes the mechanisms of carcinogenic bacteria and the status of cancer treatment through bacterial eradication. Then, it reviews engineering strategies for developing highly functional and multitasking CNPs and examines the emerging applications of CNPs in combating carcinogenic bacteria. These applications include neutralizing virulence factors to enhance bacterial eradication, exploiting bacterium-host binding for precise antibiotic delivery, and modulating antibacterial immunity to inhibit bacterial growth. Overall, this article aims to inspire technological innovations in developing CNPs for effective cancer treatment through oncogenic bacterial targeting.

Pore-Forming Toxin-Driven Recovery of Peroxidase-Mimicking Activity in Biomass Channels for Label-Free Electrochemical Bacteria Sensing

The development of sensitive, selective, and rapid methods to detect bacteria in complex media is essential to ensuring human health. Virulence factors, particularly pore-forming toxins (PFTs) secreted by pathogenic bacteria, play a crucial role in bacterial diseases and serve as indicators of disease severity. In this study, a nanochannel-based label-free electrochemical sensing platform was developed for the detection of specific pathogenic bacteria based on their secreted PFTs. In this design, wood substrate channels were functionalized with a Fe-based metal-organic framework (FeMOF) and then protected with a layer of phosphatidylcholine (PC)-based phospholipid membrane (PM) that serves as a peroxidase mimetic and a channel gatekeeper, respectively. Using Staphylococcus aureus (S. aureus) as the model bacteria, the PC-specific PFTs secreted by S. aureus perforate the PM layer. Now exposed to the FeMOF, uncharged 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) molecules in the electrolyte undergo oxidation to cationic products (ABTS•+). The measured transmembrane ionic current indicates the presence of S. aureus and methicillin-resistant S. aureus (MRSA) with a low detection limit of 3 cfu mL-1. Besides excellent specificity, this sensing approach exhibits satisfactory performance for the detection of target bacteria in the complex media of food.

Exploring 0D lead-free metal halide with highly efficient blue light emission and high-sensitivity photodetection

Environmentally friendly and highly efficient blue luminescent materials are an unremitting pursuit in the optoelectronic field. Herein, we assembled a new 0D lead-free metal halide of (F-PPA)ZnBr4, which exhibits narrow blue light emission with a remarkable PLQY of 50.15%, high stability and high detection sensitivity toward UV light. These results indicate the potential for the application of low-dimensional zinc-based halides in multiple optoelectronic devices.

Advances in Heterostructures for Optoelectronic Devices: Materials, Properties, Conduction Mechanisms, Device Applications

Atomically thin 2D transition metal dichalcogenides (TMDs) have recently been spotlighted for next-generation electronic and photoelectric device applications. TMD materials with high carrier mobility have superior electronic properties different from bulk semiconductor materials. 0D quantum dots (QDs) possess the ability to tune their bandgap by composition, diameter, and morphology, which allows for a control of their light absorbance and emission wavelength. However, QDs exhibit a low charge carrier mobility and the presence of surface trap states, making it difficult to apply them to electronic and optoelectronic devices. Accordingly, 0D/2D hybrid structures are considered as functional materials with complementary advantages that may not be realized with a single component. Such advantages allow them to be used as both transport and active layers in next-generation optoelectronic applications such as photodetectors, image sensors, solar cells, and light-emitting diodes. Here, recent discoveries related to multicomponent hybrid materials are highlighted. Research trends in electronic and optoelectronic devices based on hybrid heterogeneous materials are also introduced and the issues to be solved from the perspective of the materials and devices are discussed.

Maintaining sidedness and fluidity in cell membrane coatings supported on nano-particulate and planar surfaces

Supported cell membrane coatings meet many requirements set to bioactive nanocarriers and materials, provided sidedness and fluidity of the natural membrane are maintained upon coating. However, the properties of a support-surface responsible for maintaining correct sidedness and fluidity are unknown. Here, we briefly review the properties of natural membranes and membrane-isolation methods, with focus on the asymmetric distribution of functional groups in natural membranes (sidedness) and the ability of molecules to float across a membrane to form functional domains (fluidity). This review concludes that hydrophilic sugar-residues of glycoproteins in the outer-leaflet of cell membranes direct the more hydrophobic inner-leaflet towards a support-surface to create a correctly-sided membrane coating, regardless of electrostatic double-layer interactions. On positively-charged support-surfaces however, strong, electrostatic double-layer attraction of negatively-charged membranes can impede homogeneous coating. In correctly-sided membrane coatings, fluidity is maintained regardless of whether the surface carries a positive or negative charge. However, membranes are frozen on positively-charged, highly-curved, small nanoparticles and localized nanoscopic structures on a support-surface. This leaves an unsupported membrane coating in between nanostructures on planar support-surfaces that is in dual-sided contact with its aqueous environment, yielding enhanced fluidity in membrane coatings on nanostructured, planar support-surfaces as compared with smooth ones.

Interface-Engineered Field-Effect Transistor Electronic Devices for Biosensing

Promising advances in molecular medicine have promoted the urgent requirement for reliable and sensitive diagnostic tools. Electronic biosensing devices based on field-effect transistors (FETs) exhibit a wide range of benefits, including rapid and label-free detection, high sensitivity, easy operation, and capability of integration, possessing significant potential for application in disease screening and health monitoring. In this perspective, the tremendous efforts and achievements in the development of high-performance FET biosensors in the past decade are summarized, with emphasis on the interface engineering of FET-based electrical platforms for biomolecule identification. First, an overview of engineering strategies for interface modulation and recognition element design is discussed in detail. For a further step, the applications of FET-based electrical devices for in vitro detection and real-time monitoring in biological systems are comprehensively reviewed. Finally, the key opportunities and challenges of FET-based electronic devices in biosensing are discussed. It is anticipated that a comprehensive understanding of interface engineering strategies in FET biosensors will inspire additional techniques for developing highly sensitive, specific, and stable FET biosensors as well as emerging designs for next-generation biosensing electronics.

Perovskite single-pixel detector for dual-color metasurface imaging recognition in complex environment

Highly efficient multi-dimensional data storage and extraction are two primary ends for the design and fabrication of emerging optical materials. Although metasurfaces show great potential in information storage due to their modulation for different degrees of freedom of light, a compact and efficient detector for relevant multi-dimensional data retrieval is still a challenge, especially in complex environments. Here, we demonstrate a multi-dimensional image storage and retrieval process by using a dual-color metasurface and a double-layer integrated perovskite single-pixel detector (DIP-SPD). Benefitting from the photoelectric response characteristics of the FAPbBr2.4I0.6 and FAPbI3 films and their stacked structure, our filter-free DIP-SPD can accurately reconstruct different colorful images stored in a metasurface within a single-round measurement, even in complex environments with scattering media or strong background noise. Our work not only provides a compact, filter-free, and noise-robust detector for colorful image extraction in a metasurface, but also paves the way for color imaging application of perovskite-like bandgap tunable materials.

Semiconducting Polymer Nanospherical Nucleic Acid Probe for Transcriptomic Imaging of Cancer Chemo-Immunotherapy

Real-time in vivo imaging of RNA can enhance the understanding of physio-pathological processes. However, most nucleic acid-based sensors have poor resistance to nucleases and limited photophysical properties, making them suboptimal for this purpose. To address this, a semiconducting polymer nanospherical nucleic acid probe (SENSE) for transcriptomic imaging of cancer immunity in living mice is developed. SENSE comprises a semiconducting polymer (SP) backbone covalently linked with recognition DNA strands, which are complemented by dye-labeled signal DNA strands. Upon detection of targeted T lymphocyte transcript (Gzmb: granzyme B), the signal strands are released, leading to a fluorescence enhancement correlated to transcript levels with superb sensitivity. The always-on fluorescence of the SP core also serves as an internal reference for tracking SENSE uptake in tumors. Thus, SENSE has the dual-signal channel that enables ratiometric imaging of Gzmb transcripts in the tumor of living mice for evaluating chemo-immunotherapy; moreover, it has demonstrated sensitivity and specificity comparable to flow cytometry and quantitative polymerase chain reaction,  yet offering a faster and simpler means of T cell detection in resected tumors. Therefore, SENSE represents a promising tool for in vivo RNA imaging.

Aptamer-functionalized field-effect transistor biosensors for disease diagnosis and environmental monitoring

Nano-biosensors that are composed of recognition molecules and nanomaterials have been extensively utilized in disease diagnosis, health management, and environmental monitoring. As a type of nano-biosensors, molecular specificity field-effect transistor (FET) biosensors with signal amplification capability exhibit prominent advantages including fast response speed, ease of miniaturization, and integration, promising their high sensitivity for molecules detection and identification. With intrinsic characteristics of high stability and structural tunability, aptamer has become one of the most commonly applied biological recognition units in the FET sensing fields. This review summarizes the recent progress of FET biosensors based on aptamer functionalized nanomaterials in medical diagnosis and environmental monitoring. The structure, sensing principles, preparation methods, and functionalization strategies of aptamer modified FET biosensors were comprehensively summarized. The relationship between structure and sensing performance of FET biosensors was reviewed. Furthermore, the challenges and future perspectives of FET biosensors were also discussed, so as to provide support for the future development of efficient healthcare management and environmental monitoring devices.

Recent advances in the detection of pathogenic microorganisms and toxins based on field-effect transistor biosensors

In food safety analysis, the detection and control of foodborne pathogens and their toxins are of great importance. Monitoring of virus transmission is equally important, especially in light of recent findings that coronaviruses have been detected in frozen foods and packages during the current global epidemic of coronavirus disease 2019. In recent years, field-effect transistor (FET) biosensors have attracted considerable scholarly attention for pathogenic microorganisms and toxins detection and sensing due to their rapid response time, high sensitivity, wide dynamic range, high specificity, label-free detection, portability, and cost-effectiveness. FET-based biosensors can be modified with specific recognition elements, thus providing real-time qualitative and semiquantitative analysis. Furthermore, with advances in nanotechnology and device design, various high-performance nanomaterials are gradually applied in the detection of FET-based biosensors. In this article, we review specific detection in different biological recognition elements are immobilized on FET biosensors for the detection of pathogenic microorganisms and toxins, and we also discuss nonspecific detection by FET biosensors. In addition, there are still unresolved challenges in the development and application of FET biosensors for achieving efficient, multiplexed, in situ detection of pathogenic microorganisms and toxins. Therefore, directions for future FET biosensor research and applications are discussed.

Caco-2 cell-derived biomimetic electrochemical biosensor for cholera toxin detection

Cholera is a highly contagious and lethal waterborne disease induced by an infection with Vibrio cholerae (V. cholerae) secreting cholera toxin (CTx). Cholera toxin subunit B (CTxB) from the CTx specifically binds with monosialo-tetra-hexosyl-ganglioside (GM1) found on the exterior cell membrane of an enterocyte. Bioinspired by the pathological process of CTx, we developed an electrochemical biosensor with GM1-expressing Caco-2 cell membrane (CCM) on the electrode surface. Briefly, the electrode surface was functionalized with CCM using the vesicle fusion method. We determined the CTxB detection performances of Caco-2 cell membrane-coated biosensor (CCB) using electrochemical impedance spectroscopy (EIS). the CCB had an excellent limit of detection of ∼11.46 nM and a detection range spanning 100 ng/mL - 1 mg/mL. In addition, the CCB showed high selectivity against various interfering molecules, including abundant constituents of intestinal fluid and various bacterial toxins. The long-term stability of the CCBs was also verified for 3 weeks using EIS. Overall, the CCB has excellent potential for practical use such as point-of-care and cost-effective testing for CTxB detection in developing countries.

Improving anion-exchange efficiency and spectrum stability of perovskite quantum dots via an Al3+ bonding-doping synergistic effect

Anion-exchange reactions are recognized as a vital and facile post-synthesis method to precisely manipulate the emission spectra of perovskite quantum dots (QDs). However, the anion-exchange process often induces adverse structural evolution and trap-mediated mechanisms, so mixed-halide perovskite QDs suffer inefficient anion exchange and poor spectra-stability issues, which limits access to high-quality primary color perovskite QDs for display applications. Here we report an Al³⁺ bonding-doping synergistic strategy for manufacturing stable mixed Br/Cl deep-blue perovskite QDs. By doping Al³⁺ into perovskite QDs, highly-efficient Cl^- anion exchange and a large-range blue shift of the PL spectrum (∼62 nm with only 0.1 mmol of Cl feed) can be easily achieved. Notably, the Al³⁺-mediated deep-blue emission sample exhibits superior stability against moisture and electric fields. It also shows an elevated valence band maximum level. Based on the anion-exchanged QDs, a spectrum-stable deep-blue QLED with an EQE of 1.38% at 463 nm is achieved. Our findings demonstrate a feasible and promising strategy for developing high-performance deep-blue perovskite materials and optoelectronic devices.

Influence of Sr doping on the photoelectronic properties of CsPbX3 (X = Cl, Br, or I): a DFT investigation

To broaden the application of cesium lead halide perovskites, doping technology has been widely proposed. In this study, we calculated a 12.5% concentration of a Sr-doped CsPbX₃ (X = Cl, Br, or I) perovskite via density functional theory. The results showed that the bandgap energy of the perovskite increased by 0.2-0.3 eV. The high symmetry points of the energy band changed from R to Γ after Sr doping because the Sr doping affected the initial distribution of atomic orbital hybridization. In addition, optical absorption spectra after doping showed an obvious blueshift, whereas the absorption coefficient of CsPb_0.875Sr_0.125X₃ had the same magnitude as undoped CsPbX₃. Moreover, the effective masses of electrons and holes changed within a small range (0.01-0.03 m₀) after Sr doping. According to the findings of this study, the CsPb_0.875Sr_0.125X₃ perovskite is expected to become an ideal candidate material for designing photovoltaic and photoelectric devices.

Emerging ultrasmall luminescent nanoprobes for in vivo bioimaging

Photoluminescence (PL) imaging has become a fundamental tool in disease diagnosis, therapeutic evaluation, and surgical navigation applications. However, it remains a big challenge to engineer nanoprobes for high-efficiency in vivo imaging and clinical translation. Recent years have witnessed increasing research efforts devoted into engineering sub-10 nm ultrasmall nanoprobes for in vivo PL imaging, which offer the advantages of efficient body clearance, desired clinical translation potential, and high imaging signal-to-noise ratio. In this review, we present a comprehensive summary and contrastive discussion of emerging ultrasmall luminescent nanoprobes towards in vivo PL bioimaging of diseases. We first summarize size-dependent nano-bio interactions and imaging features, illustrating the unique attributes and advantages/disadvantages of ultrasmall nanoprobes differentiating them from molecular and large-sized probes. We also discuss general design methodologies and PL properties of emerging ultrasmall luminescent nanoprobes, which are established based on quantum dots, metal nanoclusters, lanthanide-doped nanoparticles, and silicon nanoparticles. Then, recent advances of ultrasmall luminescent nanoprobes are highlighted by surveying their latest in vivo PL imaging applications. Finally, we discuss existing challenges in this exciting field and propose some strategies to improve in vivo PL bioimaging and further propel their clinical applications.

Bridging the Gap between Nonliving Matter and Cellular Life

A cell, the fundamental unit of life, contains the requisite blueprint information necessary to survive and to build tissues, organs, and systems, eventually forming a fully functional living creature. A slight structural alteration can result in data misprinting, throwing the entire life process off balance. Advances in synthetic biology and cell engineering enable the predictable redesign of biological systems to perform novel functions. Individual functions and fundamental processes at the core of the biology of cells can be investigated by employing a synthetically constrained micro or nanoreactor. However, constructing a life-like structure from nonliving building blocks remains a considerable challenge. Chemical compartments, cascade signaling, energy generation, growth, replication, and adaptation within micro or nanoreactors must be comparable with their biological counterparts. Although these reactors currently lack the power and behavioral sophistication of their biological equivalents, their interface with biological systems enables the development of hybrid solutions for real-world applications, such as therapeutic agents, biosensors, innovative materials, and biochemical microreactors. This review discusses the latest advances in cell membrane-engineered micro or nanoreactors, as well as the limitations associated with high-throughput preparation methods and biological applications for the real-time modulation of complex pathological states.

In Situ Hydrogelation of Cellular Monolayers Enables Conformal Biomembrane Functionalization for Xeno-Free Feeder Substrate Engineering

The intricate functionalities of cellular membranes have inspired strategies for deriving and anchoring cell-surface components onto solid substrates for biological studies, biosensor applications, and tissue engineering. However, introducing conformal and right-side-out cell membrane coverage onto planar substrates requires cumbersome protocols susceptible to significant device-to-device variability. Here, a facile approach for biomembrane functionalization of planar substrates is demonstrated by subjecting confluent cellular monolayer to intracellular hydrogel polymerization. The resulting cell-gel hybrid, herein termed GELL (gelated cell), exhibits extraordinary stability and retains the structural integrity, membrane fluidity, membrane protein mobility, and topology of living cells. In assessing the utility of GELL layers as a tissue engineering feeder substrate for stem cell maintenance, GELL feeder prepared from primary mouse embryonic fibroblasts not only preserves the stemness of murine stem cells but also exhibits advantages over live feeder cells owing to the GELL's inanimate, non-metabolizing nature. The preparation of a xeno-free feeder substrate devoid of non-human components is further shown with HeLa cells, and the resulting  HeLa GELL feeder effectively sustains the growth and stemness of both murine and human induced pluripotent stem cells. The study highlights a novel bio-functionalization strategy that introduces new opportunities for tissue engineering and other biomedical applications.

Ligands in Lead Halide Perovskite Nanocrystals: From Synthesis to Optoelectronic Applications

Ligands are indispensable for perovskite nanocrystals (NCs) throughout the whole lifetime, as they not only play key roles in the controllable synthesis of NCs with different sizes and shapes, but also act as capping shell that affects optical properties and electrical coupling of NCs. Establishing a systematic understanding of the relationship between ligands and perovskite NCs is significant to enable many potential applications of NCs. This review mainly focuses on the influence of ligands on perovskite NCs. First of all, the ligands-dominated size and shape control of NCs is discussed. Whereafter, the surface defects of NCs and the bonding between ligands and perovskite NCs are classified, and corresponding post-treatment of surface defects via ligands is also summarized. Furthermore, advances in engineering the ligands towards the high performance of optoelectronic devices based on perovskite NCs, including photodetector, solar cell, light emitting diode (LED), and laser, and finally to potential challenges are also discussed.

Cell-Free Synthesis Goes Electric: Dual Optical and Electronic Biosensor via Direct Channel Integration into a Supported Membrane Electrode

Assembling transmembrane proteins on organic electronic materials is one promising approach to couple biological functions to electrical readouts. A biosensing device produced in such a way would enable both the monitoring and regulation of physiological processes and the development of new analytical tools to identify drug targets and new protein functionalities. While transmembrane proteins can be interfaced with bioelectronics through supported lipid bilayers (SLBs), incorporating functional and oriented transmembrane proteins into these structures remains challenging. Here, we demonstrate that cell-free expression systems allow for the one-step integration of an ion channel into SLBs assembled on an organic conducting polymer, poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS). Using the large conductance mechanosensitive channel (MscL) as a model ion channel, we demonstrate that MscL adopts the correct orientation, remains mobile in the SLB, and is active on the polyelectrolyte surface using optical and electrical readouts. This work serves as an important illustration of a rapidly assembled bioelectronic platform with a diverse array of downstream applications, including electrochemical sensing, physiological regulation, and screening of transmembrane protein modulators.

Nanocomposite Hydrogels as Functional Extracellular Matrices

Over recent years, nano-engineered materials have become an important component of artificial extracellular matrices. On one hand, these materials enable static enhancement of the bulk properties of cell scaffolds, for instance, they can alter mechanical properties or electrical conductivity, in order to better mimic the in vivo cell environment. Yet, many nanomaterials also exhibit dynamic, remotely tunable optical, electrical, magnetic, or acoustic properties, and therefore, can be used to non-invasively deliver localized, dynamic stimuli to cells cultured in artificial ECMs in three dimensions. Vice versa, the same, functional nanomaterials, can also report changing environmental conditions-whether or not, as a result of a dynamically applied stimulus-and as such provide means for wireless, long-term monitoring of the cell status inside the culture. In this review article, we present an overview of the technological advances regarding the incorporation of functional nanomaterials in artificial extracellular matrices, highlighting both passive and dynamically tunable nano-engineered components.

Electronic effect of substituents on the charge-transfer dynamics at the CsPbBr3 perovskite-small molecule interface

To push the boundary of the efficiency of perovskite nanocrystal-based photovoltaics, understanding the charge transfer at the interface of these nanocrystals is necessary. In an effort to understand the electronic effects of the substituents in the charge acceptor moiety, three electronically different small molecules (namely, chloranilic acid (CA), p-benzoquinone (BQ), and duroquinone (DQ)) were chosen and their detailed charge transfer dynamics were studied at the CsPbBr₃ perovskite nanocrystal-small organic molecule interface using steady state and time-resolved spectroscopic methods. The steady-state absorption and time-resolved emission studies reveal that all three molecules interact with the NCs in the excited state. Femtosecond transient absorption experiments indicate a faster ground-state bleach recovery in the presence of the three acceptors, compared with the pristine NCs. Utilizing band alignment analysis, the faster bleach recovery of the NCs in presence of the acceptors was confirmed to be because of electron transfer from the photo-excited NCs to the acceptor molecules. Moreover, the electron transfer rates fall in the Marcus normal region and can be explained based on the electronic effects of the substituents present on the acceptor molecules.

Transcription Factor-Based Biosensors for Detecting Pathogens

Microorganisms are omnipresent and inseparable from our life. Many of them are beneficial to humans, while some are not. Importantly, foods and beverages are susceptible to microbial contamination, with their toxins causing illnesses and even death in some cases. Therefore, monitoring and detecting harmful microorganisms are critical to ensuring human health and safety. For several decades, many methods have been developed to detect and monitor microorganisms and their toxicants. Conventionally, nucleic acid analysis and antibody-based analysis were used to detect pathogens. Additionally, diverse chromatographic methods were employed to detect toxins based on their chemical and structural properties. However, conventional techniques have several disadvantages concerning analysis time, sensitivity, and expense. With the advances in biotechnology, new approaches to detect pathogens and toxins have been reported to compensate for the disadvantages of conventional analysis from different research fields, including electrochemistry, nanotechnology, and molecular biology. Among them, we focused on the recent studies of transcription factor (TF)-based biosensors to detect microorganisms and discuss their perspectives and applications. Additionally, the other biosensors for detecting microorganisms reported in recent studies were also introduced in this review.

Tumor-associated macrophage membrane-camouflaged pH-responsive polymeric micelles for combined cancer chemotherapy-sensitized immunotherapy

The low immunogenicity and tumor immunosuppressive microenvironment (TIM) are two major obstacles for cancer immunotherapy. Synergistically immunogenic cell death induction and tumor-associated macrophages depletion could perfectly overcome this limitation. Herein, a tumor-associated macrophage (TAMs) membrane-camouflaged pH-responsive doxorubicin (DOX) loaded hyaluronic acid (HA)-g-poly (histidine) polymeric micelles (DHP@M2) was fabricated for the first time. DHP@M2 could effectively accumulated into tumor regions via TAMs membrane mediated immune camouflage. In acidic tumor microenvironment, particle size of DHP was enlarged due to decrease hydrophobic interaction of inner core, which caused a "membrane escape effect" to expose inner HA residue. Together high expression of α4β1 integrin, DHP@M2 could reach CD44/VCAM-1 dual-targetability to facilitate intracellular DOX accumulation for efficient ICD induction. Meanwhile, TAMs membrane could absorb colony stimulating factor 1(CSF1) through high expression of its receptor (CSF1R) on TAMs membrane to deplete TAMs in tumor tissues and relieved TIM. This strategy could efficiently induce cytotoxic T lymphocyte (CTLs) infiltration for antitumor immune response and inhibit tumor progression in 4T1 tumor bearing Balb/c mice. Therefore, DHP@M2 is suitable for cancer chemotherapy-sensitized immunotherapy.

Unraveling the Phase Transition and Luminescence Tuning of Pb-Free Cs-Cu-I Perovskites Enabled by Reaction Temperature and Polar Solvent

Ternary Pb-free Cs-Cu-I perovskites have attracted widespread attention because of their excellent optical properties and environmentally friendly advantages. Herein, two different Pb-free ternary Cs₃Cu₂I₅ nanocrystals (NCs) and CsCu₂I₃ microrods (MRs) were synthesized via a heating method. The phase and morphology transition from blue emission of Cs₃Cu₂I₅ NCs to yellow emission of CsCu₂I₃ MRs could be tuned effectively by manipulating the reaction temperature, decreasing the maximum photoluminescence quantum yields (PLQYs) from 82.7% to ∼10%. More interestingly, the Cs₃Cu₂I₅ NCs could self-assemble into stacking chains, which exhibited a strong dependence on the polarity of solvents. In addition, it was demonstrated that the rapid phase transition and luminescence tuning between Cs₃Cu₂I₅ and CsCu₂I₃ films took only a few seconds by direct heating or exposure to the polar solvent. This work may deepen the understanding of the phase transition process in Cu-based perovskites and provide a fluorescence material with a short switching time for anticounterfeiting applications.

Spontaneous Formation of Lead-Free Cs3 Cu2 I5 Quantum Dots in Metal-Organic-Frameworks with Deep-Blue Emission

All-inorganic lead-free Cs₃ Cu₂ I₅  perovskite-derivant quantum dots (QDs) have attracted tremendous attention due to their nontoxicity and unique optoelectronic properties. However, the traditional hot-injection method requires high temperatures and multiple ligands to confine the growth of QDs. Herein, a strategy is reported to spontaneously synthesize ultrasmall Cs₃ Cu₂ I₅  QDs within metal-organic-frameworks (MOFs) MOF-74 at room temperature (RT) with an average diameter of 4.33 nm. The obtained Cs₃ Cu₂ I₅  QDs exhibit an evident deep-blue emission with Commission Internationale de L'Eclairage coordinates of (0.17, 0.07), owing to the strong quantum confinement effect. Due to the protection of MOF-74, the Cs₃ Cu₂ I₅  QDs demonstrate superior stability, and the photoluminescence quantum yield retains 89% of the initial value after the storage of 1440 h under the environment with relative humidity exceeding 70%. Besides, triplet-triplet annihilation upconversion emission is observed within the composite of Cs₃ Cu₂ I₅ @MOF-74, which brings out apparent temperature-dependent photoluminescence. This study reveals a facile method for fabricating ultrasmall lead-free perovskite-derivant QDs at RT without multiple ligands. Besides, the temperature-dependent photoluminescence of Cs₃ Cu₂ I₅ @MOF-74 may open up a new way to develop the applications of temperature sensors or other related optoelectronic devices.

The Universal Growth of Ultrathin Perovskite Single Crystals

Perovskites have engaged significant attention owing to rich species and remarkable physical properties as well as optoelectronic applications. Compared to bulk counterparts, ultrathin perovskites exhibit more available compositions due to the breaking of bulk lattice limitation. Coupled with crystal lattice relaxation and quantum confinement, infinite intriguing properties of ultrathin perovskites deserve to be explored. Developing ultrathin perovskites with alterable composition and structure is a necessity to fully explore this versatile family. Herein, a universal strategy is conceived via constructing oriented solvent microenvironment induced by the interfacial electric field originated from the charge separation between solid and liquid phases, which is conducive to controlling the precursor distribution and makes crystals preferentially nucleate and grow in the preferentially lateral mode. From layered to nonlayered, organic to inorganic, and toxic to low-toxic lead-free perovskite, a full-range synthesis is achieved of ultrathin perovskites. This work opens up opportunities both for ultrathin perovskite exploration through compositional engineering and for device miniaturization in energy conversion applications.

A novel approach for designing efficient broadband photodetectors expanding from deep ultraviolet to near infrared

Broadband photodetection (PD) covering the deep ultraviolet to near-infrared (200-1000 nm) range is significant and desirable for various optoelectronic designs. Herein, we employ ultraviolet (UV) luminescent concentrators (LC), iodine-based perovskite quantum dots (PQDs), and organic bulk heterojunction (BHJ) as the UV, visible, and near-infrared (NIR) photosensitive layers, respectively, to construct a broadband heterojunction PD. Firstly, experimental and theoretical results reveal that optoelectronic properties and stability of CsPbI₃ PQDs are significantly improved through Er³⁺ doping, owing to the reduced defect density, improved charge mobility, increased formation energy, tolerance factor, etc. The narrow bandgap of CsPbI₃:Er³⁺ PQDs serves as a visible photosensitive layer of PD. Secondly, considering the matchable energy bandgap, the BHJ (BTP-4Cl: PBDB-TF) is selected as to NIR absorption layer to fabricate the hybrid structure with CsPbI₃:Er³⁺ PQDs. Thirdly, UV LC converts the UV light (200-400 nm) to visible light (400-700 nm), which is further absorbed by CsPbI₃:Er³⁺ PQDs. In contrast with other perovskites PDs and commercial Si PDs, our PD presents a relatively wide response range and high detectivity especially in UV and NIR regions (two orders of magnitude increase that of commercial Si PDs). Furthermore, the PD also demonstrates significantly enhanced air- and UV- stability, and the photocurrent of the device maintains 81.5% of the original one after 5000 cycles. This work highlights a new attempt for designing broadband PDs, which has application potential in optoelectronic devices.

Cellular Nanosponges for Biological Neutralization

Biological neutralization represents a general strategy that deploys therapeutic agents to bind with harmful molecules or infectious pathogens, block their bioactivity, and thus prevent them from causing the diseases. Here, a comprehensive review of using cell-membrane-coated nanoparticles, namely "cellular nanosponges," as host decoys for a wide range of biological neutralization applications is provided. Compared to traditional neutralization strategies, the cellular nanosponges stand out by mimicking susceptible host cells rather than accommodating the structures of the causative agents for the design of therapeutics. As all pathological agents must interact with host cells for bioactivity, nanosponges bypass the diversity of these agents and create function-driven and broad-spectrum neutralization solutions. The review focuses on the recent progress of using this new nanomedicine platform for neutralization against five primary pathological agents, including bacterial toxins, chemical toxicants, inflammatory cytokines, pathological antibodies, and viruses. Existing studies have established cellular nanosponges as versatile tools for biological neutralization. A thorough review of the cellular nanosponge technology is expected to inspire more refined cellular nanosponge designs and unique neutralization applications to address unsolved medical problems.

White Blood Cell Membrane-Coated Nanoparticles: Recent Development and Medical Applications

White blood cells (WBCs) are immune cells that play essential roles in critical diseases including cancers, infections, and inflammatory disorders. Their dynamic and diverse functions have inspired the development of WBC membrane-coated nanoparticles (denoted "WBC-NPs"), which are formed by fusing the plasma membranes of WBCs, such as macrophages, neutrophils, T cells, and natural killer cells, onto synthetic nanoparticle cores. Inheriting the entire source cell antigens, WBC-NPs act as source cell decoys and simulate their broad biointerfacing properties with intriguing therapeutic potentials. Herein, the recent development and medical applications of WBC-NPs focusing on four areas, including WBC-NPs as carriers for drug delivery, as countermeasures for biological neutralization, as nanovaccines for immune modulation, and as tools for the isolation of circulating tumor cells and fundamental research is reviewed. Overall, the recent development and studies of WBC-NPs have established the platform as versatile nanotherapeutics and tools with broad medical application potentials.

One-pot synthesis of novel ligand-free tin(II)-based hybrid metal halide perovskite quantum dots with high anti-water stability for solution-processed UVC photodetectors

Recently, lead-based halide perovskites have gained extensive attention due to their outstanding optoelectronic properties. However, the toxicity of lead would seriously limit its future application. To address these issues, in this work novel ligand-free organic-inorganic hybrid metal halide TBASnCl₃ (C₁₆H₃₆NSnCl₃) quantum dots are synthesized by a one-pot method at room temperature, and they showed high anti-water stability and high potential applications for high-performance UVC photodetectors. Our experimental data showed that the responsivity of the lateral photodetectors Au/TBASnCl₃/Au, in which the active layer (i.e. TBASnCl₃) was synthesized by further introducing SnF₂ as a precursor besides SnCl₂, reached 7.3 mA W^-1 with a specific detectivity of 1.67 × 10¹¹ Jones under 0.36 mW cm^-2 254 nm illumination at -5 V, and it showed a long lifetime even in an environment with an air humidity of 60%. Therefore, it laid a solid foundation for further fabricating lead-free metal halide optoelectronic devices.

Three-dimensional transistor arrays for intra- and inter-cellular recording

Electrical impulse generation and its conduction within cells or cellular networks are the cornerstone of electrophysiology. However, the advancement of the field is limited by sensing accuracy and the scalability of current recording technologies. Here we describe a scalable platform that enables accurate recording of transmembrane potentials in electrogenic cells. The platform employs a three-dimensional high-performance field-effect transistor array for minimally invasive cellular interfacing that produces faithful recordings, as validated by the gold standard patch clamp. Leveraging the high spatial and temporal resolutions of the field-effect transistors, we measured the intracellular signal conduction velocity of a cardiomyocyte to be 0.182 m s^-1, which is about five times the intercellular velocity. We also demonstrate intracellular recordings in cardiac muscle tissue constructs and reveal the signal conduction paths. This platform could provide new capabilities in probing the electrical behaviours of single cells and cellular networks, which carries broad implications for understanding cellular physiology, pathology and cell-cell interactions.

Nanodelivery of STING agonists against cancer and infectious diseases

Vaccination is a modality that has been widely explored for the treatment of various diseases. To increase the potency of vaccine formulations, immunostimulatory adjuvants have been regularly exploited, and the stimulator of interferon genes (STING) signaling pathway has recently emerged as a remarkable therapeutic target. STING is an endogenous protein on the endoplasmic reticulum that is a downstream sensor to cytosolic DNA. Upon activation, STING initiates a series of intracellular signaling cascades that ultimately generate potent type I interferon-mediated immune responses. Both natural and synthetic agonists have been used to stimulate the STING pathway, but they are usually administered locally due to low bioavailability, instability, and difficulty in bypassing the plasma membrane. With excellent pharmacokinetic profiles and versatility, nanocarriers can address many of these challenges and broaden the application of STING vaccines. Along these lines, STING-inducing nanovaccines are being developed to address a wide range of diseases. In this review, we discuss the recent advances in STING nanovaccines for anticancer, antiviral, and antibacterial applications.

Biomembrane-Functionalized Micromotors: Biocompatible Active Devices for Diverse Biomedical Applications

There has been considerable interest in developing synthetic micromotors with biofunctional, versatile, and adaptive capabilities for biomedical applications. In this perspective, cell membrane-functionalized micromotors emerge as an attractive platform. This new class of micromotors demonstrates enhanced propulsion and compelling performance in complex biological environments, making them suitable for various in vivo applications, including drug delivery, detoxification, immune modulation, and phototherapy. This article reviews various proof-of-concept studies based on different micromotor designs and cell membrane coatings in these areas. The review focuses on the motor structure and performance relationship and highlights how cell membrane functionalization overcomes the obstacles faced by traditional synthetic micromotors while imparting them with unique capabilities. Overall, the cell membrane-functionalized micromotors are expected to advance micromotor research and facilitate its translation towards practical uses.

Hexamethyldisilazane-Assisted Ambient Condition Mn2+ Doping Perovskite Nanocrystals

Doping Mn2+ ions into lead halide perovskite (LHP) nanocrystals (NCs) has attracted great attention in the optoelectronic fields due to the stability enhancement and unique dual-color emission characteristics arising from...

Space-confined growth of large-mismatch CsPb(BrxCI1−x)3/GaN heterostructures with tunable band alignments and optical properties

Space-confined growth strategy is developed to grow large-mismatch CsPb(Br1−xClx)3/GaN heterostructures with type-II band alignment and tunable optical properties'.

Stabilizing Red-emissive All-inorganic Perovskite Nanocrystal by Ligands-mediated Room-temperature Procedure

Although lead halide perovskites (LHPs) nanocrystals (NCs) are considered propitious materials due to their extraordinary optoelectronic properties, the scalability of synthesis and poor ambient stability hinder their commercial applications. Herein,...

Ultrasmall Luminescent Metal Nanoparticles: Surface Engineering Strategies for Biological Targeting and Imaging

In the past decade, ultrasmall luminescent metal nanoparticles (ULMNPs, d < 3 nm) have achieved rapid progress in addressing many challenges in the healthcare field because of their excellent physicochemical properties and biological behaviors. With the sharp shrinking size of large plasmonic metal nanoparticles (PMNPs), the contributions from the surface characteristics increase significantly, which brings both opportunities and challenges in the application-driven surface engineering of ULMNPs toward advanced biological applications. Here, the systematic advancements in the biological applications of ULMNPs from bioimaging to theranostics are summarized with emphasis on the versatile surface engineering strategies in the regulation of biological targeting and imaging performance. The efforts in the surface functionalization strategies of ULMNPs for enhanced disease targeting abilities are first discussed. Thereafter, self-assembly strategies of ULMNPs for fabricating multifunctional nanostructures for multimodal imaging and nanomedicine are discussed. Further, surface engineering strategies of ratiometric ULMNPs to enhance the imaging stability to address the imaging challenges in complicated bioenvironments are summarized. Finally, the phototoxicity of ULMNPs and future perspectives are also reviewed, which are expected to provide a fundamental understanding of the physicochemical properties and biological behaviors of ULMNPs to accelerate their future clinical applications in healthcare.

Stable Bismuth-Doped Lead Halide Perovskite Core-Shell Nanocrystals by Surface Segregation Effect

Lead halide perovskite nanocrystals (NCs) exhibit excellent optoelectronic performance, however, the broad application is limited by their poor stability. Herein, a strategy for stable core-shell structured bismuth-doped lead halide perovskite NCs is reported. The stable core-shell perovskite NCs are prepared based on heterovalent substitutions and surface segregation effect. Core-shell features are revealed through advanced characterization and structure analyses. Meanwhile, the transfer of carriers between the core and the shell is observed by ultrafast transient absorption spectroscopy. The core-shell structured perovskite NCs exhibit outstanding structure stability and retain 97% of the original photocatalytic efficiency after cycle experiments under moisture ambient and light irradiation. Such a core-shell structure constructs gradient energy levels. These findings are expected to facilitate the development of stable lead halide perovskite devices.

Accurate construction of cell membrane biomimetic graphene nanodecoys via purposeful surface engineering to improve screening efficiency of active components of traditional Chinese medicine

Biomimetic nanoengineering presents great potential in biomedical research by integrating cell membrane (CM) with functional nanoparticles. However, preparation of CM biomimetic nanomaterials for custom applications that can avoid the aggregation of nanocarriers while maintaining the biological activity of CM remains a challenge. Herein, a high-performance CM biomimetic graphene nanodecoy was fabricated via purposeful surface engineering, where polyethylene glycol (PEG) was used to modifying magnetic graphene oxide (MGO) to improve its stability in physiological solution, so as to improve the screening efficiency to active components of traditional Chinese medicine (TCM). With this strategy, the constructed PEGylated MGO (PMGO) could keep stable at least 10 days, thus improving the CM coating efficiency. Meanwhile, by taking advantage of the inherent ability of HeLa cell membrane (HM) to interact with specific ligands, HM-camouflaged PMGO showed satisfied adsorption capacity (116.2 mg/g) and selectivity. Finally, three potential active components, byakangelicol, imperatorin, and isoimperatorin, were screened from Angelica dahurica, whose potential antiproliferative activity were further validated by pharmacological studies. These results demonstrated that the purposeful surface engineering is a promising strategy for the design of efficient CM biomimetic nanomaterials, which will promote the development of active components screening in TCM.

Surface Chemistry Engineering of Perovskite Quantum Dots: Strategies, Applications, and Perspectives

The presence of surface ligands not only plays a key role in keeping the colloidal integrity and non-defective surface of metal halide perovskite quantum dots (PQDs), but also serves as a knob to tune their optoelectronic properties for a variety of exciting applications including solar cells and light-emitting diodes. However, these indispensable surface ligands may also deteriorate the stability and key properties of PQDs due to their highly dynamic binding and insulating nature. To address these issues, a number of innovative surface chemistry engineering approaches have been developed in the past few years. Based on an in-depth fundamental understanding of the surface atomistic structure and surface defect formation mechanism in the tiny nanoparticles, a critical overview focusing on the surface chemistry engineering of PQDs including advanced colloidal synthesis, in-situ surface passivation, and solution-phase/solid-state ligand exchange is presented, after which their unprecedented achievements in photovoltaics and other optoelectronics are presented. The practical hurdles and future directions are critically discussed to inspire more rational design of PQD surface chemistry toward practical applications.