"Seeing" and Controlling Photoisomerization by (Z)-/(E)-Isomers with Aggregation-Induced Emission Characteristics

Aggregation-induced emission-active supramolecular polymers: from controlled preparation to applications

Supramolecular polymers are typical self-assemblies, in which repeating monomer units are bonded together with dynamic and reversible noncovalent interactions. Supramolecular polymers can combine the advantages of polymer science and supramolecular chemistry. Aggregation-induced emission (AIE) means that a molecule remains faintly emissive in the dispersed state but intensively luminescent in a highly aggregated state. AIE has brought new opportunities and further development potential to the field of polymeric chemistry. The integration of AIE luminogens with supramolecular interactions can provide new vitality for supramolecular polymers. Therefore, it is essential for scientists to understand the preparation and applications of AIE-active supramolecular polymers. This review focuses on the recent advanced progress in the preparation of AIE-active supramolecular polymers. In addition, we summarize the newly developed supramolecular polymers with an AIE nature and their applications in chemical sensing, and in vitro and in vivo imaging, as well as the visualization of their structure and properties. Finally, the development trends and challenges of AIE-active supramolecular polymers are prospected.

Halogen bonding-driven chiral amplification of a bimetallic gold-copper cluster through hierarchical assembly

Understanding the fundamentals and applications of chirality relies substantially on the amplification of chirality through hierarchical assemblies involving various weak interactions. However, a notable challenge remains for metal clusters chiral assembly driven by halogen bonding, despite their promising applications in lighting, catalysis, and biomedicine. Here, we used halogen bonding-driven assembly to achieve a hierarchical degree of achiral emissive Au2Cu2 clusters. From single crystals to one-dimensional ribbons and then to helixes, the morphologies were primarily modulated by intermolecular halogen bonding that evoked by achiral or/and chiral iodofluorobenzene (IFBs) molecules. Concomitantly, the luminescence and circularly polarized luminescence (CPL) changed a lot, ultimately leading to a substantial increase in the luminescence dissymmetry g-factor (glum) of 0.036 in the supramolecular helix. This work opens an avenue for hierarchical assemblies using predesigned metal clusters as building blocks though directional halogen bonding. This achievement marks a noteworthy advancement in the field of nanosized inorganic functional blocks.

Turning enol* emission of SBOH via restricting twisted intramolecular charge transfer behavior by pressure

Stimuli-responsive luminogens with aggregation-induced emission and excited state intramolecular proton transfer (ESIPT) properties have applications in storage devices, anti-counterfeiting, imaging, and sensors. Nevertheless, group rotation appears in twisted intramolecular charge transfer (TICT) state, resulting in decreased fluorescence intensity. Inhibiting TICT remains a challenge based on their intrinsic molecular configuration. Herein, we present a simple facile pressure-induced method to restrict the TICT behavior. Steady-state spectroscopy measurement shows that fluorescence enhancement and color shifts can be achieved under high pressure. Combined with in situ high-pressure ultrafast spectroscopy and theoretical calculations, the TICT behavior was restricted in two aspects. The ESIPT process was damaged, hence more particles stored in the E* state, and transferred to the TICT state hardly. Also, the rotation of (E)-dimethyl5-((4-(diethylamino)-2-hydroxybenzylidene)amino)isophthalate (SBOH) was restricted, significantly increasing the fluorescence intensity. This approach provides a new strategy for the development of stimulus-responsive materials.

Stereoisomeric engineering of aggregation-induced emission photosensitizers towards fungal killing

Fungal infection poses and increased risk to human health. Photodynamic therapy (PDT) as an alternative antifungal approach garners much interest due to its minimal side effects and negligible antifungal drug resistance. Herein, we develop stereoisomeric photosensitizers ((Z)- and (E)-TPE-EPy) by harnessing different spatial configurations of one molecule. They possess aggregation-induced emission characteristics and ROS, viz. ¹O₂ and O₂^-• generation capabilities that enable image-guided PDT. Also, the cationization of the photosensitizers realizes the targeting of fungal mitochondria for antifungal PDT killing. Particularly, stereoisomeric engineering assisted by supramolecular assembly leads to enhanced fluorescence intensity and ROS generation efficiency of the stereoisomers due to the excited state energy flow from nonradiative decay to the fluorescence pathway and intersystem (ISC) process. As a result, the supramolecular assemblies based on (Z)- and (E)-TPE-EPy show dramatically lowered dark toxicity without sacrificing their significant phototoxicity in the photodynamic antifungal experiments. This study is a demonstration of stereoisomeric engineering of aggregation-induced emission photosensitizers based on (Z)- and (E)-configurations.

AIEgen-Enabled Multicolor Visualization for the Formation of Supramolecular Polymer Networks

Extensive reports on the use of supramolecular polymer networks (SPNs) in self-healing materials, controlled release system and degradable products have led more researchers to tap their potential owing to the unique properties. Yet, the attendant efforts in the visualization through conventional luminescence methods during the formation of SPNs have been met with limited success. Herein, we designed a special type of SPNs prepared by PPMU polymer chains containing pyrene benzohydrazonate (PBHZ) molecules as AIEgens for the multicolor visualization with naked eyes. The complete detection of the formation process of the networks relied on the PBHZ molecules with aggregation-induced ratiometric emission (AIRE) effect, which enabled the fluorescence of the polymer networks transits from blue to cyan, and then to green with the increasing crosslinking degree derived from the hydrogen bonds between 2-ureido-4-pyrimidone (UPy) units of the polymer chains. Additionally, we certificated the stimuli-responsiveness of the obtained SPNs, and the fluorescence change, as well as observing the morphology transition. The AIEgen-enabled multicolor visualization of the formation of SPNs may provide better understanding of the details of the crosslinking interactions in the microstructural evolution, giving more inspiration for the multifunctional products based on SPNs.

Light-Responsive Hexagonal Assemblies of Triangular Azo Dyes

The rational design of small building block molecules and understanding their molecular assemblies are of fundamental importance in creating new stimuli-responsive organic architectures with desired shapes and functions. Based on the experimental results of light-induced conformational changes of four types of triangular azo dyes with different terminal functional groups, as well as absorption and fluorescence characteristics associated with their molecular assemblies, we report that aggregation-active emission enhancement (AIEE)-active compound (1) substituted with sterically crowded tert-butyl (t-Bu) groups showed approximately 35% light-induced molecular switching and had a strong tendency to assemble into highly stable hexagonal structures with AIEE characteristics. Their sizes were regulated from nanometer-scale hexagonal rods to micrometer-scale sticks depending on the concentration. This is in contrast to other triangular compounds with bromo (Br) and triphenylamine (TPA) substituents, which exhibited no photoisomerization and tended to form flexible fibrous structures. Moreover, non-contact exposure of the fluorescent hexagonal nanorods to ultraviolet (UV) light led to a dramatic hexagonal-to-amorphous structure transition. The resulting remarkable variations, such as in the contrast of microscopic images and fluorescence characteristics, were confirmed by various microscopic and spectroscopic measurements.

A Fast-Response AIE-Active Ratiometric Fluorescent Probe for the Detection of Carboxylesterase

Hepatocellular carcinoma (HCC) is associated with a high mortality rate worldwide. The therapeutic outcomes can be significantly improved if diagnosis and treatment are initiated earlier in the disease process. Recently, the carboxylesterase (CaE) activity/level in human plasma was reported to be a novel serological biomarker candidate for HCC. In this article, we fabricated a new fluorescent probe with AIE characteristics for the rapid detection of CaE with a more reliable ratiometric response mode. The TCFISE probe showed high sensitivity (LOD: 93.0 μU/mL) and selectivity toward CaE. Furthermore, the good pH stability, superior resistance against photobleaching, and low cytotoxicity highlight the high potential of the TCFISE probe for application in the monitoring of CaE activity in complex biological samples and in live cells, tissues, and animals.

A Strategy Based on Aggregation-Induced Ratiometric Emission to Differentiate Molecular Weight of Supramolecular Polymers

Molecular weight has an important bearing on the properties of supramolecular polymers. However, the intuitive differentiation of the molecular weight of supramolecular polymers remains challenging. Given this situation, establishing a reliable relationship between fluorescence properties and molecular weight may be a promising strategy. Herein, we prepared a supramolecular monomer M1 with aggregation-induced ratiometric emission characteristics. With the increasing M1 concentration (0.100-100 mM), the average degree of polymerization (DP_DOSY ) rose from 1.00 to 293. Meanwhile, the color changed from dark blue to cyan, finally to yellow-green in the same concentration range. Hence, the intuitive relationship between DP_DOSY and fluorescence colors was constructed, allowing the visual differentiation of molecular weight. Moreover, the fluorescence color could be regulated by introducing a competitive molecule to induce the depolymerization of supramolecular polymers.

Metal-ligand Interactions and Oligo(p-Phenylene Vinylene) Derivatives Based Supramolecular Polymer Possessing Variable Fluorescence Colors

Fluorescent supramolecular polymers combine the benefits of supramolecular polymers in terms of dynamic nature with the optoelectronic features of incorporated fluorophores. However, the majority of fluorescent supramolecular polymers can only exhibit a single fluorescent state, restricting their applications. Incorporating J-type dyes into supramolecular monomers is expected to impart supramolecular polymers with variable fluorescence colors, because the aggregation mode of J-type dyes is closely related to the formation of supramolecular polymers. Herein, we report a supramolecular polymer [M1·Zn(OTf)₂ ]_n , in which the monomer M1 contains a J-type dye, oligo(p-phenylene vinylene) (OPV) derivative, and two terpyridine ends. The M1 + Zn(OTf)₂ solutions exhibit fluorescence color changes varying from cyan to yellow-green in the monomer concentration ranging from 0.04 to 1.00 mM. Moreover, based on the outputs from laser scanning confocal microscopy (LSCM), the fluorescence color transition during the formation of supramolecular polymers is intuitively proven. Additionally, considering the close relationship between the supramolecular polymer structure and the fluorescence color, the fluorescence color can be regulated by introducing tetraethylammonium hydroxide (TBAOH) that can bind with Zn²⁺ competitively to break up the structure of the supramolecular polymer. This article is protected by copyright. All rights reserved.

Supramolecular Hydrogen Bonding Assembly from Non-Coplanar Aromatic Tetra-1H-Pyrazoles with Crystallization-Induced Emission (CIE)

Here, we report a design strategy for constructing supramolecular organic frameworks by introducing ¹H-pyrazole groups to aromatic cores as non-coplanar molecules to form diverse supramolecular assemblies through multiple ¹H-pyrazole [N−H···N] hydrogen bonds as well as other weak interactions. The new supramolecular organic frameworks displayed interesting crystallization-induced emission (CIE) behavior.

Solvent- and Light-Sensitive AIEE-Active Azo Dye: From Spherical to 1D and 2D Assemblies

Fluorescent molecular assembly systems provide an exciting platform for creating stimuli-responsive nano- and microstructured materials with optical, electronic, and sensing functions. To understand the relationship between (i) the plausible molecular structures preferentially adopted depending on the solvent polarity (such as N,N-dimethylformamide [DMF], tetrahydrofuran [THF], and toluene), (ii) the resulting spectroscopic features, and (iii) self-assembled nano-, micro-, and macrostructures, we chose a sterically crowded triangular azo dye (3Bu) composed of a polar molecular core and three peripheral biphenyl wings. The chromophore changed the solution color from yellow to pink-red depending on the solvent polarity. In a yellow DMF solution, a considerable amount of the twisted azo form could be kept stable with the help of favorable intermolecular interactions with the solvent molecules. By varying the concentration of the DMF solution, the morphology of self-assembled structures was transformed from nanoparticles to micrometer-sized one-dimensional (1D) structures such as sticks and fibers. In a pink-red toluene solution, the periphery of the central ring became more planar. The resulting significant amount of the keto-hydrazone tautomer grew into micro- and millimeter-sized 1D structures. Interestingly, when THF-H₂O (1:1) mixtures were stored at a low temperature, elongated fibers were stacked sideways and eventually developed into anisotropic two-dimensional (2D) sheets. Notably, subsequent exposure of visible-light-irradiated sphere samples to solvent vapor resulted in reversible fluorescence off↔on switching accompanied by morphological restoration. These findings suggest that rational selection of organic dyes, solvents, and light is important for developing reusable fluorescent materials.

Dicyanodistyrylbenzene based positional isomers: a comparative study of AIEE and stimuli responsive multicolour fluorescence switching

Positional isomers of α-dicyanodistyrylbenzene core systems were synthesized and studied for the AIEE effect and stimuli responsive fluorescence colour switching.

Aggregation-induced emission (AIE)-guided dynamic assembly for disease imaging and therapy

The phenomenon of aggregation-induced emission (AIE) is inseparable from molecular aggregation and self-assembly. Therefore, the combination of AIE and supramolecular self-assembly is well-matched. AIE-guided dynamic assembly (AGDA) could effectively respond to the endogenous stimuli (such as pH, enzymes, redox molecules) and exogenous stimuli (temperature, light, ultrasound) in the disease microenvironment, so as to achieve specific imaging and diagnosis of the disease lesions. Moreover, AGDA also dynamically adjust the intramolecular motions of AIE molecules, thereby adjusting the energy dissipation pathways and realizing the switch between photodynamic therapy and photothermal therapy for superior therapeutic effects. In this review, we aim to give an overview of the constructing strategies, stimuli-responsive imaging, regulation of intramolecular motion of AGDA in recent years, which is expected to grasp the research status and striving directions of AGDA for imaging and therapy.

Trans/cis-stereoisomers of triterpenoid-substituted tetraphenylethene: aggregation-induced emission, aggregate morphology, and mechano-chromism

Trans/cis stereoisomers with multiple functionalities play an important role in chemistry and materials science. In this work, two pure stereoisomers (trans- and cis-TPE-2GA) of the tetraphenylethene (TPE) derivatives bi-substituted by a bio-resourced rigid triterpenoid and glycyrrhetinic acid (GA) were synthesized and characterized by 1D and 2D NMR, single crystal analysis, and HR-MS. Both trans- and cis-TPE-2GA are thermally stable even on heating at 160 °C for 30 min, whereas they can undergo trans-to-cis and cis-to-trans photoisomerization under similar UV illumination. The introduction of triterpenoid units endowed isomers with different aggregation-induced emission (AIE) and self-assembly properties and distinct crystallinity. Trans- and cis-TPE-2GA exhibit different evolution of the fluorescent intensity in water/acetone mixture with the increase in the water fraction, which are closely related to the different evolution of the aggregate morphology, from nanorods to nanospheres for trans-TPE-2GA, while from twisted ribbons, to nanotubes and nanospheres for cis-TPE-2GA. In the solid state, the mechano-chromic properties are shown by cis-TPE-2GA, while no mechano-chromic effect is observed for trans-TPE-2GA under the same grinding conditions because of their distinct crystallinity. Finally, theoretical calculation and photophysical study demonstrate that despite both isomers being assigned to the charge transfer state emission, cis-TPE-2GA has a slightly lower energy gap, a higher quantum yield, and a longer lifetime in comparison with trans-TPE-2GA, which explained their difference in the fluorescence and mechano-chromic properties. This work may improve the understanding of the TPE-based trans and cis stereoisomers, which will be beneficial in the design of novel TPE-based functional materials.

Morphologically Diverse Micro- and Macrostructures Created via Solvent Evaporation-Induced Assembly of Fluorescent Spherical Particles in the Presence of Polyethylene Glycol Derivatives

The creation of fluorescent micro- and macrostructures with the desired morphologies and sizes is of considerable importance due to their intrinsic functions and performance. However, it is still challenging to modulate the morphology of fluorescent organic materials and to obtain insight into the factors governing the morphological evolution. We present a facile bottom-up approach to constructing diverse micro- and macrostructures by connecting fluorescent spherical particles (SPs), which are generated via the spherical assembly of photoisomerizable azobenzene-based propeller-shaped chromophores, only with the help of commercially available polyethylene glycol (PEG) derivatives. Without any extra additives, solvent evaporation created a slow morphological evolution of the SPs from short linear chains (with a length of a few micrometers) to larger, interconnected networks and sheet structures (ranging from tens to >100 µm) at the air–liquid interface. Their morphologies and sizes were significantly dependent on the fraction and length of the PEG. Our experimental results suggest that noncovalent interactions (such as hydrophobic forces and hydrogen bonding) between the amphiphilic PEG chains and the relatively hydrophobic SPs were weak in aqueous solutions, but play a crucial role in creating the morphologically diverse micro- and macrostructures. Moreover, short-term irradiation with visible light caused fast morphological crumpling and fluorescence switching of the obtained structures.

A Feasible Strategy of Fabricating Type I Photosensitizer for Photodynamic Therapy in Cancer Cells and Pathogens

The utilization of photochemical reaction channel based on radical process is rarely reported, which might be a very efficient and feasible strategy for improving generation of Type I reactive oxygen species (ROS). In this work, a double ionic-type aggregation-induced emission luminogen (AIEgen) of TIdBO was developed as a photosensitizer, of which the potential photocyclization characteristic involving an electron-transfer process had a positive effect on Type I ROS generation in aggregates under continuous light irradiation. Its noticeable photodynamic therapy (PDT) performance and self-monitoring of PDT process by the relationship between cellular morphology change and fluorescence intensity enhancement were achieved. In addition, it showed a good killing ability to microbes and specific interactions with microbes but not cells by regulating the incubation time. These intriguing results reveal a feasible design principle for the implementation of efficient PS preparation in clinical treatment under hypoxic conditions.

Modulation of Aggregation-Induced Emission by Excitation Energy Transfer: Design and Application

Excitation energy transfer (EET) as a fundamental photophysical process is well-explored for developing functional materials with tunable photophysical properties. Compared to traditional fluorophores, aggregation-induced emission luminogens (AIEgens) exhibit unique advantages for building EET systems, especially serving as energy donors, due to their outstanding photophysical properties such as bright fluorescence in aggregation state, broad absorption and emission spectra, large Stokes shift, and high photobleaching resistance. In addition, the photophysical properties of AIEgens can be modulated by energy transfer for improved luminescence performance. Therefore, a variety of EET systems based on AIEgens have been constructed and their applications in different areas have been explored. In this review, we summarize recent progress in the design strategy of AIE-based energy transfer systems for light-harvesting, fluorescent probes and theranostic systems, with an emphasis on design strategies to achieve desirable properties. The limitations, challenges and future opportunities of AIE-EET systems are briefly outlined. Design strategies and applications (light-harvesting, fluorescent probe and theranostics) of AIEgen-based excitation energy systems are discussed in this review.

Aggregate Science: From Structures to Properties

Molecular science entails the study of structures and properties of materials at the level of single molecules or small interacting complexes of molecules. Moving beyond single molecules and well-defined complexes, aggregates (i.e., irregular clusters of many molecules) serve as a particularly useful form of materials that often display modified or wholly new properties compared to their molecular components. Some unique structures and phenomena such as polymorphic aggregates, aggregation-induced symmetry breaking, and cluster excitons are only identified in aggregates, as a few examples of their exotic features. Here, by virtue of the flourishing research on aggregation-induced emission, the concept of "aggregate science" is put forward to fill the gaps between molecules and aggregates. Structures and properties on the aggregate scale are also systematically summarized. The structure-property relationships established for aggregates are expected to contribute to new materials and technological development. Ultimately, aggregate science may become an interdisciplinary research field and serves as a general platform for academic research.

Solid-state intramolecular motions in continuous fibers driven by ambient humidity for fluorescent sensors

One striking feature of molecular rotors is their ability to change conformation with detectable optical signals through molecular motion when stimulated. However, due to the strong intermolecular interactions, synthetic molecular rotors have often relied on fluid environments. Here, we take advantage of the solid-state intramolecular motion of aggregation-induced emission (AIE) molecular rotors and one-dimensional fibers, developing highly sensitive optical fiber sensors that respond to ambient humidity rapidly and reversibly with observable chromatic fluorescence change. Moisture environments induce the swelling of the polymer fibers, activating intramolecular motions of AIE molecules to result in red-shifted fluorescence and linear response to ambient humidity. In this case, polymer fiber provides a process-friendly architecture and a physically tunable medium for the embedded AIE molecules to manipulate their fluorescence response characteristics. Assembly of sensor fibers could be built into hierarchical structures, which are adaptive to diverse-configuration for spatial-temporal humidity mapping, and suitable for device integration to build light-emitting sensors as well as touchless positioning interfaces for intelligence systems.

Silver-Driven Coordination Self-Assembly of Tetraphenylethene Stereoisomer: Construct Charming Topologies and Their Mechanochromic Behaviors

A series of silver coordination complexes (CCs) have been synthesized through self-assembly of five pyridine-substituted tetraphenylethylene stereoisomer ligands with silver ions (named Ag-TPE-2by-1-E, Ag-TPE-2by-2-E, Ag-TPE-2by-2-Z, Ag-TPE-2by-3-E, and Ag-TPE-2by-3-Z). These silver CCs show distinct topologies including beaded chain frameworks, linear structures, and discrete metallacycles. The single-crystal analysis results reveal the critical role of the space distribution of the coordination site and stereoisomer ligands in controlling the silver CCs' geometry configuration and modulating the optical properties. Luminescent investigations revealed that Ag-TPE-2by-2-E, Ag-TPE-2by-2-Z, Ag-TPE-2by-3-E, and Ag-TPE-2by-3-Z possess obvious mechanocharomic behaviors, which can be achieved several reversible cycles through repeated grinding and methanol soaking processes. However, the Ag-TPE-2by-1-E showed tenacious stability toward mechanical grinding and temperature. Thus, these silver CCs provide a good platform to investigate the influence of the space distribution of the coordination site of ligands on their geometry and mechanocharomic properties.