Plasma Nitriding of TiO2 Nanotubes: N-Doping in Situ Investigations Using XPS

Solar-powered detection of organic dyes using nitrogen-doped N-TiO2/Ag2O nanorod arrays

Organic pollutant detection has caused widespread concern regarding due to their potential environmental and human health risks. In this work, a nitrogen-doped titanium dioxide/silver oxide (N-TiO2/Ag2O) composite has been designed as a sensitive photoelectrochemical (PEC) monitoring platform of organic dyes. Sensitive determination relies on the outstanding PEC performance of N-TiO2/Ag2O. The improved PEC performance stems from the effective separation of photocarriers and the extended light response range provided by the narrowing bandgap and a p-n junction with N-TiO2/Ag2O. The N-TiO2/Ag2O electrode exhibits a photocurrent density of up to 2.2 mA/cm2, demonstrating three times increase compared with the photocurrent density observed with the pure TiO2 film. The linear detection range for rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) is 0.2 ng/mL to 10 μg/mL with an ultrasensitive detection limit of 0.2 ng/mL without bias voltage. Due to the outstanding photocurrent density and sensitive response to organic pollutants, the N-TiO2/Ag2O PEC sensor provided a promising analytical method to detect environmental organic dyes.

Novel portable photoelectrochemical sensor based on CdS/Au/TiO2 nanotube arrays for sensitive, non-invasive, and instantaneous uric acid detection in saliva

Uric acid (UA) monitoring is the most effective method for diagnosis and treatment of gout, hyperuricemia, hypertension, and other diseases. However, challenges remain regarding detection efficiency and rapid on-site detection. Here, we first synthesized a CdS/Au/TiO2-NTAs Z-scheme heterojunction material using a titanium dioxide nanotube array (TiO2-NTAs) as the substrate and modified with gold nanoparticles (Au) and cadmium sulfide particles (CdS). This material achieves bandgap alignment to generate a large number of electron-hole pairs under illumination. Then, using CdS/Au/TiO2-NTAs as the working electrode and molecularly imprinted polymers (MIP) as the recognition unit, we constructed a portable photoelectrochemical (PEC) sensor for non-invasive instant detection of UA concentration in human saliva, which has unique advantages in the field of high-sensitivity PEC instant detection. The portable MIP-PEC sensor achieves a linear range of 0.01-50 μM and a detection limit as low as 5.07 nM (S/N = 3). At the same time, the portable MIP-PEC sensor exhibits excellent sensitivity, specificity as well as stability, and shows no statistically significant difference compared to traditional high-performance liquid chromatography (HPLC) in practical sample detection. Compared to traditional PEC modes, this work demonstrates a novel and universal method for high-sensitivity instant detection in the field of PEC.

Long-Term Stability of Light-Induced Ti3+ Defects in TiO2 Nanotubes for Amplified Photoelectrochemical Water Splitting

This study shows that the simple approach of keeping anodic TiO2 nanotubes at 70 °C in ethanol for 1 h results in improved photoelectrochemical water splitting activity due to initiation of crystallization in the material amplified by the light-induced formation of a Ti3+ -Vo states under UV 365 nm illumination. For the first time, the light-induced Ti3+ -Vo states are generated when oxygen is present in the reaction solution and are stable when in contact with air (oxygen) for a long time (two months). We confirmed here that the amorphous or nearly amorphous structure of titania supports the survival of Ti3+ species in contact with oxygen. It is also shown that the ethanol treatment substantially improves the morphology of the titania nanotube arrays, specifically, less surface cracking and surface purification from C- and F-based contamination from the electrolyte used for anodizing.

High adsorptive performance of chitosan-microalgae-carbon-doped TiO2 (kronos)/ salicylaldehyde for brilliant green dye adsorption: Optimization and mechanistic approach

A composite of chitosan biopolymer with microalgae and commercial carbon-doped titanium dioxide (kronos) was modified by grafting an aromatic aldehyde (salicylaldehyde) in a hydrothermal process for the removal of brilliant green (BG) dye. The resulting Schiff's base Chitosan-Microalgae-TiO2 kronos/Salicylaldehyde (CsMaTk/S) material was characterised using various analytical methods (conclusive of physical properties using BET surface analysis method, elemental analysis, FTIR, SEM-EDX, XRD, XPS and point of zero charge). Box Behnken Design was utilised for the optimisation of the three input variables, i.e., adsorbent dose, pH of the media and contact time. The optimum conditions appointed by the optimisation process were further affirmed by the desirability test and employed in the equilibrium studies in batch mode and the results exhibited a better fit towards the pseudo-second-order kinetic model as well as Freundlich and Langmuir isotherm models, with a maximum adsorption capacity of 957.0 mg/g. Furthermore, the reusability study displayed the adsorptive performance of CsMaTk/S remains effective throughout five adsorption cycles. The possible interactions between the dye molecules and the surface of the adsorbent were derived based on the analyses performed and the electrostatic attractions, H-bonding, Yoshida-H bonding, π-π and n-π interactions are concluded to be the responsible forces in this adsorption process.

Observation of inherited plasmonic properties of TiN in titanium oxynitride (TiOxNy) for solar-drive photocatalytic applications

This study demonstrates the synthesis of titanium oxynitride (TiOxNy) via a controlled step-annealing of commercial titanium nitride (TiN) powders under normal ambience. The structure of the formed TiOxNy system is confirmed via XRD, Rietveld refinements, XPS, Raman, and HRTEM analysis. A distinct plasmonic band corresponding to TiN is observed in the absorption spectrum of TiOxNy, indicating that the surface plasmonic resonance (SPR) property of TiN is being inherited in the resulting TiOxNy system. The prerequisites such as reduced band gap energy, suitable band edge positions, reduced recombination, and enhanced carrier-lifetime manifested by the TiOxNy system are investigated using Mott-Schottky, XPS, time-resolved and steady-state PL spectroscopy techniques. The obtained TiOxNy photocatalyst is found to degrade around 98% of 10 ppm rhodamine B dye in 120 min and produce H2 at a rate of ∼1546 μmolg-1h-1 under solar light irradiation along with consistent recycle abilities. The results of cyclic voltammetry, linear sweep voltammetry, electrochemical impedance and photocurrent studies suggest that this evolved TiOxNy system could be functioning via plasmonic Ohmic interface rather than the typical plasmonic Schottky interface due to their amalgamated band structures in the oxynitride phase.

A Novel Photocatalytic Functional Coating Applied to the Degradation of Xylene in Coating Solvents under Solar Irradiation

A novel photocatalytic functional coating was prepared with g-C₃N₄/TiO₂ composites as the photocatalytic active component modified by dielectric barrier discharge (DBD), and it showed an efficient catalytic performance under solar light irradiation. The degradation of xylene released from fluorocarbon coating solvents by the g-C₃N₄/TiO₂ composite coatings was investigated under simulated solar irradiation. The degradation efficiency of the coating mixed with DBD-modified 10%-g-C₃N₄/TiO₂ showed a stable, long-lasting, and significantly higher activity compared to the coatings mixed with the unmodified catalyst. Ninety-eight percent of the xylene released from fluorocarbon coating solvents was successfully removed under solar light irradiation in 2 h. The properties of the catalyst samples before and after modification were evaluated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), ultraviolet-visible (UV-vis) spectroscopy, X-ray photoelectron spectroscopy (XPS), and other characterization techniques. The results suggested that DBD-modified g-C₃N₄/TiO₂ showed an improved capture ability and utilization efficiency of solar light with reduced band gap and lower complexation rate of electron-hole pairs. The prepared photocatalytic coating offers an environmentally friendly approach to purify the volatile organic compounds (VOCs) released from solvent-based coatings.

N-doped rutile TiO2 nanorod@g-C3N4 core/shell S-scheme heterojunctions for boosting CO2 photoreduction activity

A novel core/shell structure composed of N-doped rutile TiO2@g-C3N4 (NT@CNx) with an S-scheme heterojunction is successfully synthesized. The S-scheme heterojunction optimizes the electrochemical property and redox ability of the NT@CNx composite.

Controllable Phase Transformation and Enhanced Photocatalytic Performance of Nano-TiO2 by Using Oxalic Acid

Degradation of organic pollutants, especially organic dyes and antibiotics, by semiconductor photocatalysts is an efficient strategy for wastewater treatment. TiO₂ nanomaterials are considered to be promising photocatalysts due to their high chemical stability, high efficiency and availability. Anatase TiO₂ generally has superior photocatalytic activity to the rutile phase. However, the anatase phase can be irreversibly transformed to rutile phase when calcined at an elevated temperature. Methods to improve the stability of anatase are especially important for the TiO₂ gas sensors working at high temperatures. The addition of strong acids can effectively suppress this transformation process. However, these strong acids are relatively expensive, corrosive and environmentally unfriendly. Herein, oxalic acid (OA) as a natural acid was used to control the hydrolysis process of tetrabutyl titanate (TBOT), leading to controllable crystalline phase transformation and reduced crystalline size of TiO₂ on the nanoscale. What is more, the photocatalytic degradation performances were enhanced continuously when the molar ratio of OA to TBOT increased. The degradation reaction rate constants of CT650-R25 were about 10 times that of CT650-R0. The mechanism study shows that the enhanced photocatalytic activity can be attributed to the improved dispersibility, increased specific surface area and reduced recombination rates of photo-induced charge carriers and decreased energy bands as the concentration of OA increased. Thus, this work provides a simple, mild and effective method for controlling the crystalline forms of nano-TiO₂ with enhanced photocatalytic performance towards waste water treatment.

Nanofunctionalization of Additively Manufactured Titanium Substrates for Surface-Enhanced Raman Spectroscopy Measurements

Powder bed fusion using a laser beam (PBF-LB) is a commonly used additive manufacturing (3D printing) process for the fabrication of various parts from pure metals and their alloys. This work shows for the first time the possibility of using PBF-LB technology for the production of 3D titanium substrates (Ti 3D) for surface-enhanced Raman scattering (SERS) measurements. Thanks to the specific development of the 3D titanium surface and its nanoscale modification by the formation of TiO₂ nanotubes with a diameter of ~80 nm by the anodic oxidation process, very efficient SERS substrates were obtained after deposition of silver nanoparticles (0.02 mg/cm², magnetron sputtering). The average SERS enhancement factor equal to 1.26 × 10⁶ was determined for pyridine (0.05 M + 0.1 M KCl), as a model adsorbate. The estimated enhancement factor is comparable with the data in the literature, and the substrate produced in this way is characterized by the high stability and repeatability of SERS measurements. The combination of the use of a printed metal substrate with nanofunctionalization opens a new path in the design of SERS substrates for applications in analytical chemistry. Methods such as SEM scanning microscopy, photoelectron spectroscopy (XPS) and X-ray diffraction analysis (XRD) were used to determine the morphology, structure and chemical composition of the fabricated materials.

Photocatalytic Conversion of Organic Pollutants in Air: Quantum Yields Using a Silver/Nitrogen/TiO2 Mesoporous Semiconductor under Visible Light

This research studies the photocatalytic conversion of methanol (25–90 µmol/L range) as a volatile organic compound (VOC) surrogate into CO2, using a N/Ag/TiO2 photocatalyst under visible light irradiation in a Photo-CREC Air unit. The N/Ag/TiO2 mesh supported photocatalyst is prepared via the solvothermal method. While the bare-TiO2 is inactive under visible light, the N/Ag/TiO2 2 wt.% loaded stainless-steel woven mesh displays 35% quantum yields, with 80% absorbed photons and 60% methanol conversion in a 110 min irradiation period. Results obtained are assigned to silver surface plasmon resonance, silver and nitrogen species synergistic impacts on band gap, and their influence on particle agglomerate size and semiconductor acidity. The determined quantum yields under visible light in a Photo-CREC Air unit, are the highest reported in the technical literature, that these authors are aware of, with this opening unique opportunity for the use of visible light for the purification of air from VOC contaminants.

Immunoassay detection of tumor-associated autoantibodies using protein G bioconjugated to nanomagnet-silica decorated with Au@Pd nanoparticles

A colorimetric immunosensor was developed for the detection of tumor-associated anti-p53 autoantibodies (anti-p53aAbs). The immunosensor platform was prepared by immobilizing human-protein (p53Ag) onto a high binding 96-well plate. The immunoassay was based on the immunometric sandwich protocol, and protein G functionalized nanomagnet-silica nanoparticles decorated with Au@Pd (Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs-protG) was used as the detection nanobioprobe. The Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs-protG exhibited a high binding affinity for the captured anti-p53aAbs and high catalytic performance towards the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). The oxidation of TMB resulted in significant color change and a UV-vis absorption signal. The detection was achieved by measuring the changes in UV-Vis absorption as the concentrations of anti-p53aAbs changed. The apparent binding affinity (K_D) between the p53aAbs and Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs-protG was 35.2 ng mL^-1. The plot of change in the absorption intensity against the logarithm of anti-p53aAbs was linear within 1.0-500.0 ng mL^-1 with a correlation coefficient (R²) of 0.98. The detection limit (LoD) using 3σ was calculated to be 15 pg mL^-1, which is lower than the conventional HRP-label based colorimetric immunoassay. The real sample detection was investigated using the serum recovery method. The recovery of the anti-p53aAbs ranges from 98.5% to 105.7%, demonstrating its potential for practical applications.

Titania/chitosan–lignin nanocomposite as an efficient photocatalyst for the selective oxidation of benzyl alcohol under UV and visible light

Developing functional materials from biomass is a significant research subject due to its unique structure, abundant availability, biodegradability and low cost. A series of chitosan–lignin (CL) composites were prepared through a hydrothermal method by varying the weight ratio of chitosan and lignin. Subsequently, these CL composites were combined with titania (T) to form a nanocomposite (T/CL) using sol–gel and hydrothermal based methods. T/CL nanocomposites exhibited improved photocatalytic performance in comparison with sol–gel and hydrothermally prepared pristine titania (SGH-TiO₂), towards the selective oxidation of benzyl alcohol (BnOH) to benzaldehyde (Bnald) under UV (375 nm) and visible light (515 nm). More specifically, the 75T/CL(25 : 75) nanocomposite (a representative photocatalyst from the 75T/CL nanocomposite series) showed very high selectivity (94%) towards Bnald at 55% BnOH conversion under UV light. Whereas, SGH-TiO₂ titania exhibited much lower (68%) selectivity for Bnald at similar BnOH conversion. Moreover, the 75T/CL(25 : 75) nanocomposite also showed excellent Bnald selectivity (100%) at moderate BnOH conversion (19%) under visible light. Whereas, SGH-TiO₂ did not show any activity for BnOH oxidation under visible light. XPS studies suggest that the visible light activity of the 75T/CL(25 : 75) nanocomposite is possibly related to the doping of nitrogen into titania from chitosan. However, according to UV-visible-DRS results, no direct evidence pertaining to the decrease in band-gap energy of titania was found upon coupling with the CL composite and the visible light activity was attributed to N-doping of titania. Overall, it was found that T/CL nanocomposites enhanced the photocatalytic performance of titania via improved light harvesting and higher selectivity through mediation of active radical species.

Combining titania with chitosan–lignin composites results in an active and selective photocatalyst for the oxidation of benzyl alcohol to benzaldehyde under green light (515 nm).