Injectable Poly(ethylene glycol) Hydrogels Cross-Linked by Metal-Phenolic Complex and Albumin for Controlled Drug Release

In Situ Forming, Enzyme-Responsive Peptoid-Peptide Hydrogels: An Advanced Long-Acting Injectable Drug Delivery System

Long-acting drug delivery systems are promising platforms to improve patient adherence to medication by delivering drugs over sustained periods and removing the need for patients to comply with oral regimens. This research paper provides a proof-of-concept for the development of a new optimized in situ forming injectable depot based on a tetrabenzylamine-tetraglycine-d-lysine-O-phospho-d-tyrosine peptoid-D-peptide formulation ((NPhe)4GGGGk(AZT)y(p)-OH). The chemical versatility of the peptoid-peptide motif allows low-molecular-weight drugs to be precisely and covalently conjugated. After subcutaneous injection, a hydrogel depot forms from the solubilized peptoid-peptide-drug formulation in response to phosphatase enzymes present within the skin space. This system is able to deliver clinically relevant concentrations of a model drug, the antiretroviral zidovudine (AZT), for 35 days in Sprague-Dawley rats. Oscillatory rheology demonstrated that hydrogel formation began within ∼30 s, an important characteristic of in situ systems for reducing initial drug bursts. Gel formation continued for up to ∼90 min. Small-angle neutron scattering data reveal narrow-radius fibers (∼0.78-1.8 nm) that closely fit formation via a flexible cylinder elliptical model. The inclusion of non-native peptoid monomers and D-variant amino acids confers protease resistance, enabling enhanced biostability to be demonstrated in vitro. Drug release proceeds via hydrolysis of an ester linkage under physiological conditions, releasing the drug in an unmodified form and further reducing the initial drug burst. Subcutaneous administration of (NPhe)4GGGGk(AZT)y(p)-OH to Sprague-Dawley rats resulted in zidovudine blood plasma concentrations within the 90% maximal inhibitory concentration (IC90) range (30-130 ng mL-1) for 35 days.

Polyelectrolytes for Environmental, Agricultural, and Medical Applications

In recent decades, polyelectrolytes (PELs) have attracted significant interest owing to a surge in research dedicated to the development of new technologies and applications at the biological level. Polyelectrolytes are macromolecules of which a substantial portion of the constituent units contains ionizable or ionic groups. These macromolecules demonstrate varied behaviors across different pH ranges, ionic strengths, and concentrations, making them fascinating subjects within the scientific community. The aim of this review is to present a comprehensive survey of the progress in the application studies of polyelectrolytes and their derivatives in various fields that are vital for the advancement, conservation, and technological progress of the planet, including agriculture, environmental science, and medicine. Through this bibliographic review, we seek to highlight the significance of these materials and their extensive range of applications in modern times.

Tannic Acid Incorporated Antibacterial Polyethylene Glycol Based Hydrogel Sponges for Management of Wound Infections

Conventional wound dressings fail to provide features that can assist the healing process of chronic wounds. Multifunctional wound dressings address this issue by incorporating attributes including antibacterial and antioxidant activity, and the ability to enhance wound healing. Herein, polyethylene glycol (PEG)-based antibacterial hydrogel sponge dressings are prepared by a rapid and facile gas foaming method based on an acid chloride/alcohol reaction where tannic acid (TA) is included as a reactant to impart antibacterial efficacy as well as to enhance the mechanical properties of the samples. The results reveal that the TA-integrated sponges possess excellent antibacterial properties against both Escherichia coli and Staphylococcus aureus with approximately 6-8 log reduction in the microbial colony count after 6 h, indicating their high potential for management of infection-prone wounds. Compared to the control sample, TA incorporation increases the elastic modulus by twofold. As the samples also exhibit biocompatibility, antioxidant activity, and wound healing capacity, the novel TA-incorporated hydrogels can be an alternative to traditional wound dressings for wounds with low-to-moderate exudate.

Injectable Chitosan-Methoxy Polyethylene Glycol Hybrid Hydrogel Untangling the Wound Healing Behavior: In Vitro and In Vivo Evaluation

Wound healing, particularly for difficult-to-treat wounds, presents a serious threat and may lead to complications. Currently available dressings lack mucoadhesion, safety, efficacy, and, most importantly, patient compliance. Herein, we developed a unique, simple, and inexpensive injectable chitosan-methoxy polyethylene glycol (chitosan-mPEG) hybrid hydrogel with tunable physicochemical and mechanical properties for wound healing. The detailed physicochemical and rheological characterization of the chitosan-mPEG hydrogel has revealed chemical interaction between available -NH2 groups of chitosan and -COOH groups of mPEG acid, which, to our perspective, enhanced the mechanical and wound healing properties of hybrid chitosan and mPEG hydrogel compared to solo chitosan or PEG hydrogel. By introducing mPEG, the wound healing ability of hydrogel is synergistically improved due to its antibacterial feature, together with chitosan's innate role in hemostasis and wound closure. The detailed hemostasis and wound closure potential of the chitosan-mPEG hydrogel were investigated in a rat model, which confirmed a significant acceleration in wound healing and ultimately wound closure. In conclusion, the developed chitosan-mPEG hydrogel met all the required specifications and could be developed as a promising material for hemostasis, especially wound management, and as an excellent candidate for wound healing application.

Drug-Releasing Tannic Acid-Mediated Adhesive PEG Hydrogel for Porous Titanium Implants

Porous titanium implants are commonly utilized for orthopedic surgery because they can mimic the mechanical properties and porous structure of human bone. However, the bioinertness of titanium (Ti) has been reported to obstruct biointegration processes, resulting in slower bone repair. Here, we propose a localized drug delivery system on Ti surfaces using adhesive hydrogel to enhance biological-Ti interactions. The hydrogel was fabricated from polyethylene glycol (PEG), which was cross-linked by the complex of tannic acid (TA) and 1,4-phenylenediboronic acid (PDBA) and stabilized by bovine serum albumin (BSA). The hydrogel was formed and attached to a Ti plate to investigate stability, biodegradability, controlled drug release, and biocompatibility. The stability and biodegradability of the hydrogel could be tuned by adjusting the concentrations of BSA and TA. The hydrogel lasted and remained adhered to the Ti surface after being submerged in PBS for at least 15 days. The controlled release of strontium ranelate (SrRan) and the release mechanism depended on the amount of TA since it was found to govern the hydrogel integrity and pore size. Additionally, in vitro biocompatibility was validated using L929 fibroblast and MC3T3-E1 osteoblast cells that showed greater than 70% viability. The adhesive hydrogel was further studied by injecting it into a 3D-printed Ti-scaffold that contained a porous structure mimicking natural human bone. The hydrogel completely filled and adhered to the inner porous structure of the scaffold. The biodegradation and drug release of the hydrogel in the scaffold occurred at a slower rate, suggesting sustainable drug release that is suitable for bone cell regeneration. The overall results in biodegradability, controlled drug release, and biocompatibility demonstrate the great potential of the drug-releasing TA-mediated adhesive PEG hydrogel as a Ti-enhancing biomaterial that supports osseointegration.

An implantable composite scaffold for amplified chemodynamic therapy and tissue regeneration

Tissue regeneration and tumor cell killing after surgical resection are the two keys to achieving effective tumor therapy. In this study, an implantable system with combined functions of tumor therapy and tissue repair was constructed. Tannic acid (TA)/Fe³⁺ nanoparticles with Fenton catalytic activity were loaded with GSH inhibitor BSO drug (BTF), and acted as the therapeutic factor to realize amplified chemodynamic tumor treatment. Bioactive glass (BG) fibers loaded with vascular endothelial growth factor (VEGF) were used as the drug carrier matrix with tissue repair function (BGV). Then the BGV@BTF composite fibers were obtained by anchoring BTF nanoparticles on the surface of BGV fibers. Under tumorous acidic conditions, BTF nanoparticles can be released from the composite fibers, and taken up by tumor cells. Facilitated by BSO with the GSH suppression effect and TA with Fe³⁺ reducing properties, BTF nanoparticles can realize high oxidative stress in tumor cells and subsequent cell death. In addition, BG fibers and VEGF can both promote tissue regeneration and accelerate postoperative wound healing. The simultaneous suppression of tumor growth and promotion of tissue repair in this work is inspiring in the field of postoperative tumor treatment and recovery.

Emerging albumin hydrogels as personalized biomaterials

Developing biomaterials-based tissue engineering scaffolds with personalized features and intrinsic biocompatibility is appealing and urgent. Through utilizing various strategies, albumin, as the most abundant protein in plasma, could be fabricated into sustainable, cost-effective, and potentially personalized hydrogels that would display enormous biological applications. To date, much of the albumin-based research is primarily engrossed in using albumin as a therapeutic molecule or a drug carrier, not much as a scaffold for tissue engineering. For this reason, we have come up with a detailed and insightful review of recent progress in albumin-based hydrogels having an emphasis on production techniques, material characteristics, and biological uses. It is envisioned that albumin-based scaffolds would be appealing and useful platforms to meet current tissue engineering needs and achieve the goal of clinical translation to benefit patients. STATEMENT OF SIGNIFICANCE: The creation of autologous material-based scaffolds is a potential method for preventing immunological reactions and obtaining the best therapeutic results. Patient-derived albumin hydrogels may consequently provide improved opportunities for personalized treatment due to their abundant supply and minimal immunogenicity. To provide a detailed and insightful summary on albumin-based hydrogels, this review includes latest comprehensive information on their preparation procedures, features, and applications in 3D printing and other biomedical applications. The challenges, along with the future potential for implementing albumin-based hydrogels in clinics, have also been addressed.

In Situ-Forming Cellulose/Albumin-Based Injectable Hydrogels for Localized Antitumor Therapy

Injectable hydrogels, which are formed in situ by changing the external stimuli, have the unique characteristics of easy handling and minimal invasiveness, thus providing the advantage of bypass surgical operation and improving patient compliance. Using external temperature stimuli to realize the sol-to-gel transition when preparing injectable hydrogel is essential since the temperature is stable in vivo and controllable during ex vivo, although the hydrogels obtained possibly have low mechanical strength and stability. In this work, we designed an in situ fast-forming injectable cellulose/albumin-based hydrogel (HPC-g-AA/BSA hydrogels) that responded to body temperature and which was a well-stabilized hydrogen-bonding network, effectively solving the problem of poor mechanical properties. The application of localized delivery of chemotherapeutic drugs of HPC-g-AA/BSA hydrogels was evaluated. In vitro and in vivo results show that HPC-g-AA/BSA hydrogels exhibited higher antitumor efficacy of reducing tumor size and seem ideal for localized antitumor therapy.

Biomedical Application, Patent Repository, Clinical Trial and Regulatory Updates on Hydrogel: An Extensive Review

Hydrogels are known for their leading role in biomaterial systems involving pharmaceuticals that fascinate material scientists to work on the wide variety of biomedical applications. The physical and mechanical properties of hydrogels, along with their biodegradability and biocompatibility characteristics, have made them an attractive and flexible tool with various applications such as imaging, diagnosis and treatment. The water-cherishing nature of hydrogels and their capacity to swell-contingent upon a few ecological signals or the simple presence of water-is alluring for drug conveyance applications. Currently, there are several problems relating to drug delivery, to which hydrogel may provide a possible solution. Hence, it is pertinent to collate updates on hydrogels pertaining to biomedical applications. The primary objective of this review article is to garner information regarding classification, properties, methods of preparations, and of the polymers used with particular emphasis on injectable hydrogels. This review also covers the regulatory and other commerce specific information. Further, it enlists several patents and clinical trials of hydrogels with related indications and offers a consolidated resource for all facets associated with the biomedical hydrogels.

Dual antioxidant-photosensitizing hydrogel system: Cross-linking of chitosan with tannic acid for enhanced photodynamic efficacy

Herein, a new antioxidant-photosensitizing hydrogel based on chitosan has been developed to control photodynamic therapy (PDT) activity in cancer treatment. In PDT, photosensitizers generate reactive oxygen species (ROS) during photochemical reactions, leading oxidative damage to cancer cells. However, high ROS levels are lethal to non-target healthy cells and tissues such as endothelial cells and blood cells. To mediate these drawbacks, we improved PDT with a natural polyphenolic antioxidant, Tannic acid (TA), to control the ROS level and minimize side effects through singlet oxygen (¹O₂) scavenging. In this work, chitosan-based hydrogels were designed using tannic acid as an antioxidant cross-linker and loaded with water-soluble N, N'-di-(l-alanine)-3,4,9,10-perylene tetracarboxylic diimide (PDI-Ala) as a photosensitizer. Our results showed that the hydrogel formed a three-dimensional (3D) microstructure with good mechanical strength and significant singlet oxygen production and antioxidant activity. In addition, the behavior of human melanoma cell line A375 and dental pulp stem cells (as normal cells) was compared and studied during an in vitro photodynamic treatment. Normal cells had a higher viability than cancer cells, indicating that the PDT is more effective on cancer cells than on normal cells. The new hydrogels could be applied as an effective new drug to control PDT performance.

Ibuprofen-Loaded Heparin Modified Thermosensitive Hydrogel for Inhibiting Excessive Inflammation and Promoting Wound Healing

Hydrogels have been investigated as ideal biomaterials for wound treatment owing to their ability to form a highly moist environment which accelerates cell migration and tissue regeneration for prompt wound healing. They can also be used as a drug carrier for local delivery, and are able to activate immune cells to enhance wound healing. Here, we developed heparin-conjugated poly(N-isopropylacrylamide), an injectable, in situ gel-forming polymer, and evaluated its use in wound healing. Ibuprofen was encapsulated into the hydrogel to help reduce pain and excessive inflammation during healing. In addition to in vitro studies, a BALB/c mice model was used to evaluate its effect on would healing and the secretion of inflammatory mediators. The in vitro assay confirmed that the ibuprofen released from the hydrogel dramatically reduced lipopolysaccharide-induced inflammation by suppressing the production of NO, PGE2 and TNF-α in RAW264.7 macrophages. Moreover, an in vivo wound healing assay was conducted by applying hydrogels to wounds on the backs of mice. The results showed that the ibuprofen-loaded hydrogel improved healing relative to the phosphate buffered saline group. This study indicates that ibuprofen loaded in an injectable hydrogel is a promising candidate for wound healing therapy.