Direct Synthesis of Magnetic CoFe2O4 Nanoparticles as Recyclable Photo-Fenton Catalysts for Removing Organic Dyes

Design, Fabrication and Characterization of Multi-Yolk@Shell NiCuFe2 O4 @mSiO2 Mesoporous Nanocomposite Spheres for the Synthesis of Pyrimido-Quinolines under Solvent-Free Conditions

Multi-yolk@shell mesoporous silica spheres are becoming more and more attractive as high-performance catalysts because of their high surface areas, variable pore sizes, and low densities. In this work, a NiCuFe2 O4 magnetic core with a shell of mesoporous silica mesoporous has been prepared in an easy two-step procedure. The prepared multi-yolk@shell NiCuFe2 O4 @mSiO2 spheres were characterized by using FT-IR, XRD, VSM, EDX, BET, FE-SEM and HR-TEM techniques. These unique multi-yolk@shell NiCuFe2 O4 @mSiO2 spheres demonstrated high catalytic activity for the synthesis of pyrimidoquinolines. Also, this method exposes obvious benefits such as catalyst recyclability, easy reaction condition, simplicity of work up, high product yields and short reaction times.

inserexs: reflection choice software for resonant elastic X-ray scattering

This paper presents inserexs, an open-source computer program that aims to pre-evaluate the different reflections for resonant elastic X-ray scattering (REXS) diffraction experiments. REXS is an extremely versatile technique that can provide positional and occupational information about the atoms present in a crystal. inserexs was conceived to help REXS experimentalists know beforehand which reflections to choose to determine a parameter of interest. Prior work has already proven this to be useful in the determination of atomic positions in oxide thin films. inserexs allows generalization to any given system and aims to popularize resonant diffraction as an alternative technique to improve the resolution of crystalline structures.

Visible-light-driven iron-based heterogeneous photo-Fenton catalysts for wastewater decontamination: A review of recent advances

Visible-light-driven heterogeneous photo-Fenton process has emerged as the most promising Fenton-derived technology for wastewater decontamination, owing to its prominent superiorities including the potential utilization of clean energy (solar light), and acceleration of ≡Fe(II)/≡Fe(III) dynamic cycle. As the core constituent, catalysts play a pivotal role in the photocatalytic activation of H₂O₂ to yield reactive oxidative species (ROS). To date, all types of iron-based heterogeneous photo-Fenton catalysts (Fe-HPFCs) have been extensively reported by the scientific community, and exhibited satisfactory catalytic performance towards pollutants decomposition, sometimes even exceeding the homogeneous counterparts (Fe(II)/H₂O₂). However, the relevant reviews on Fe-HPFCs, especially from the viewpoint of catalyst-self design are extremely limited. Therefore, this state-of-the-art review focuses on the available Fe-HPFCs in literatures, and gives their classification based on their self-characteristics and modification strategies for the first time. Two classes of representative Fe-HPFCs, conventional inorganic semiconductors of Fe-containing minerals and newly emerging Fe-based metal-organic frameworks (Fe-MOFs) are comprehensively summarized. Moreover, three universal strategies including (i) transition metal (TMs) doping, (ii) construction of heterojunctions with other semiconductors or plasmonic materials, and (iii) combination with supporters were proposed to tackle their inherent defects, viz., inferior light-harvesting capacity, fast recombination of photogenerated carriers, slow mass transfer and low exposure and uneven dispersion of active sites. Lastly, a critical emphasis was also made on the challenges and prospects of Fe-HPFCs in wastewater treatment, providing valuable guidance to researchers for the reasonable construction of high-performance Fe-HPFCs.

Recyclable magnetically retrievable nanocatalysts for C–heteroatom bond formation reactions

During recent years, magnetic separation has proven to be a highly indispensable and sustainable tool for facile separation of catalysts from the reaction medium with the aid of only an external magnetic force that precludes the requirement of energy intensive, solvent based centrifugation or filtration techniques. Extensive research in the area of catalysis has clearly divulged that while designing any catalyst, the foremost features that need to be paid due attention to include high activity, ready recoverability and good reusability. Fortunately, the magnetic nanocatalysts involving a superparamagnetic core material that could comprise of iron oxides such as magnetite, maghemite or hematite or mixed ferrites (CoFe2O4, CuFe2O4) have offered bright prospects of designing the ideal catalysts by proving their efficacy as strong support material that could be further engineered with various tools of nanotechnology and efficiently catalyze various C–heterobond formation reactions. This chapter provides succinct overview of all the approaches utilized for fabricating different types of magnetic nanoparticles and strategies adopted for imparting them durability. The prime forte however remains to exclusively showcase the applications of the various types of magnetic nanocatalysts in C–O, C–N, C–S and miscellaneous (C–Se, C–Te) bond formation reactions which are anticipated to benefit the synthetic community on a broad spectrum by helping them rationalize and analyze the key features that need to be taken into account, while developing these magical nanostructured catalytic systems for boosting the green bond formation reactions/transformations.

Eco-friendly synthesis of cobalt-zinc ferrites using quince extract for adsorption and catalytic applications: An approach towards environmental remediation

Cobalt-zinc ferrite nanoparticles were synthesized using environmentally friendly approach with quince extract as a reducing agent. Crystal structure and morphology of the obtained materials were studied by XRD, SEM-EDS, Mössbauer and IR spectroscopy. The synthesized nanoparticles have a cubic spinel structure and crystallite size ranging from 5 to 9 nm. The infrared spectra contain characteristic absorption bands for the M_A-O (∼560 cm^-1) and M_B-O bonds (∼420 cm^-1). Force constants were calculated for both tetrahedral and octahedral bonds. As the Co content increases, the force constant for the tetrahedral bond increases and the force constant for the octahedral bond decreases. The obtained ferrite nanoparticles have good magnetization as shown by VSM (in the range from 36 to 67 emu/g). Magnetic nanoparticles Co_xZn_1-xFe₂O₄ were also tested for induction heating with electromagnetic field. The sample with x (Co) = 0.4 has the highest specific absorption rate. The synthesized samples were tested as adsorbents using the Congo Red dye as model pollutant. The best adsorbent was pure zinc ferrite with the adsorption capacity of 24.7 mg/g. The catalytic activity of the obtained ferrites for the decomposition of H₂O₂ was studied as well. The most active catalyst was pure cobalt ferrite. Probably, the active centers are octahedral cobalt ions. Thus, the obtained magnetic nanoparticles can be used for the adsorptive removal of pollutants, catalytic decomposition of the H₂O₂ and low-frequency hyperthermia.

Preparation, characterization, and applications of Fe-based catalysts in advanced oxidation processes for organics removal: A review

Fe-based catalysts as low-cost, high-efficiency, and non-toxic materials display superior catalytic performances in activating hydrogen peroxide, persulfate (PS), peracetic acid (PAA), percarbonate (PC), and ozone to degrade organic contaminants in aqueous solutions. They mainly include ferrous salts, zero-valent iron, iron-metal composites, iron sulfides, iron oxyhydroxides, iron oxides, and supported iron-based catalysts, which have been widely applied in advanced oxidation processes (AOPs). However, there is lack of a comprehensive review systematically reporting their synthesis, characterization, and applications. It is imperative to evaluate the catalytic performances of various Fe-based catalysts in diverse AOPs systems and reveal the activation mechanisms of different oxidants by Fe-based catalysts. This work detailedly summarizes the synthesis methods and characterization technologies of Fe-based catalysts. This paper critically evaluates the catalytic performances of Fe-based catalysts in diverse AOPs systems. The effects of solution pH, reaction temperature, coexisting ions, oxidant concentration, catalyst dosage, and external energy on the degradation of organic contaminants in the Fe-based catalyst/oxidant systems and the stability of Fe-based catalysts are also discussed. The activation mechanisms of various oxidants and the degradation pathways of organic contaminants in the Fe-based catalyst/oxidant systems are revealed by a series of novel detection methods and characterization technologies. Future research prospects on the potential preparation means of Fe-based catalysts, practical applications, assistive technologies, and impact in AOPs are proposed.

Fast and Efficient Removal of Uranium onto a Magnetic Hydroxyapatite Composite: Mechanism and Process Evaluation

The exploration and rational design of easily separable and highly efficient sorbents with satisfactory capability of extracting radioactive uranium (U)-containing compound(s) are of paramount significance. In this study, a novel magnetic hydroxyapatite (HAP) composite (HAP@ CoFe2O4), which was coupled with cobalt ferrite (CoFe2O4), was rationally designed for uranium(VI) removal through a facile hydrothermal process. The U(VI) ions were rapidly removed using HAP@ CoFe2O4 within a short time (i.e., 10 min), and a maximum U(VI) removal efficiency of 93.7% was achieved. The maximum adsorption capacity (Qmax) of the HAP@CoFe2O4 was 338 mg/g, which demonstrated the potential of as-prepared HAP@CoFe2O4 in the purification of U(VI) ions from nuclear effluents. Autunite [Ca(UO2)2(PO4)2(H2O)6] was the main crystalline phase to retain uranium, wherein U(VI) was effectively extracted and immobilized in terms of a relatively stable mineral. Furthermore, the reacted HAP@CoFe2O4 can be magnetically recycled. The results of this study reveal that the suggested process using HAP@CoFe2O4 is a promising approach for the removal and immobilization of U(VI) released from nuclear effluents.