One-Step Synthesis of Water-Soluble Silver Sulfide Quantum Dots and Their Application to Bioimaging

Water-Soluble Quantum Dots for Inkjet Printing Color Conversion Films with Simultaneous High Efficiency and Stability

Water-soluble quantum dots (QDs) are necessary to prepare patterned pixels or films for high-resolution displays with less environmental burden but are very limited by the trade-off between photoluminescence and stability of QDs. In this work, we proposed synthesizing water-soluble QDs with simultaneous excellent luminescence properties and high stability by coating the amphiphilic poly(maleic anhydride-alt-1-octadecene)-ethanol amine (PMAO-EA) polymer on the surface of silane-treated QDs. These coated QDs show a photoluminescence quantum yield (PLQY) as high as 94%, and they have good photoluminescence stability against light irradiation and thermal attacks, owing to the suppression of the nonradiative recombination by the polymer layer and the isolation of oxygen and water by the silica layer. The water-soluble QDs, mixed with ethylene glycol, enable inkjet printing of QD color conversion films (QD-CCFs) with an average diameter of 68 μm for each pixel and a high PLQY of 91%. The QD-CCFs are demonstrated to fabricate red-emitting mini-LEDs by combining with blue mini-LED chips, which have an external quantum efficiency as high as 25.86% and a luminance of 2.44 × 107 cd/m2. We believe that the proposed strategy is applicable to other water-soluble QDs and paves an avenue for inkjet printing environmentally friendly QD-CCFs for mini/micro-LED displays.

Oxygen-Independent Synchronized ROS Generation and Hypoxia Prodrug Activation with Z-Scheme Heterostructure Sonosensitizer

Combination therapy has emerged as a promising approach for effective tumor treatment. However, the combination of sonodynamic therapy (SDT) and hypoxia-activated prodrugs (HAPs) has not been explored due to the contradictory requirement of oxygen (O2 ) for reactive oxygen species (ROS) generation and the necessity to avoid O2 for the activation of HAPs. In this study, this challenge is addressed by developing BiOCl-Au-Ag2 S Z-scheme heterostructure nanoparticles loaded with tirapazamine (TPZ) to achieve O2 -independent therapy. These nanoparticles demonstrate efficient electron-hole separation under ultrasound irradiation while maintaining a high redox potential. The generated holes react with water to efficiently produce hydroxyl radicals, while the electrons autonomously activate TPZ, negating the need for O2 . In vitro and in vivo assessments validate the effective tumor elimination by these Z-scheme nanoparticles without disrupting the hypoxic environment. This innovative design overcomes the limitations associated with O2 requirement in SDT and introduces a novel strategy for HAP activation and synergistic therapy between ROS and HAPs-based therapy.

Ag2S QDs integration with MnO2 nanosheets for the sensitive detection of Cr (VI) via the redox reaction induced photoelectrochemical variation

The heavy metal Cr (VI) will remain, accumulate, and migrate after entering the environment or ecosystem, causing serious harm to the environment. Here, a photoelectrochemical sensor was developed for Cr (VI), utilizing the Ag₂S quantum dots (QDs) and MnO₂ nanosheets as photoactive components. By introducing Ag₂S QDs with a narrow gap, a staggered energy level match is created which effectively prevents the carrier recombination in MnO₂ nanosheets, resulting in an enhanced photocurrent response. In the presence of the electron donor, l-ascorbic acid (AA), the photocurrent of the Ag₂S QDs and MnO₂ nanosheets modified photoelectrode is further enhanced. As AA has the ability to convert Cr (VI) to Cr (Ⅲ), the photocurrent may decline due to the decrease in the electron donors when Cr (VI) is added. This phenomenon can be utilized for the sensitive detection of Cr (VI) over a wider linear range (100 pM-30 μM) with a lower detection limit of 6.46 pM (S/N = 3). This work using the strategy that the targets induced the variations of the electron donor shows the advantages of good sensitivity and nice selectivity. The sensor holds many advantages such as simple fabrication process, economical material expense, and consistent photocurrent signals. It also holds significant potential for environmental monitoring and serves as a practical photoelectric sensing approach for detecting Cr (VI).

NIR-II Nanoprobes: A Review of Components-Based Approaches to Next-Generation Bioimaging Probes

Fluorescence and photoacoustic imaging techniques offer valuable insights into cell- and tissue-level processes. However, these optical imaging modalities are limited by scattering and absorption in tissue, resulting in the low-depth penetration of imaging. Contrast-enhanced imaging in the near-infrared window improves imaging penetration by taking advantage of reduced autofluorescence and scattering effects. Current contrast agents for fluorescence and photoacoustic imaging face several limitations from photostability and targeting specificity, highlighting the need for a novel imaging probe development. This review covers a broad range of near-infrared fluorescent and photoacoustic contrast agents, including organic dyes, polymers, and metallic nanostructures, focusing on their optical properties and applications in cellular and animal imaging. Similarly, we explore encapsulation and functionalization technologies toward building targeted, nanoscale imaging probes. Bioimaging applications such as angiography, tumor imaging, and the tracking of specific cell types are discussed. This review sheds light on recent advancements in fluorescent and photoacoustic nanoprobes in the near-infrared window. It serves as a valuable resource for researchers working in fields of biomedical imaging and nanotechnology, facilitating the development of innovative nanoprobes for improved diagnostic approaches in preclinical healthcare.

Photothermal nanohybrid hydrogels for biomedical applications

In the past decades, diseases such as wound infection, cancer, bone defect and osteoarthritis have constantly threatened the public health. However, the traditional treatment has many insufficiencies, such as high cost, easy recurrence and high biological toxicity. Hydrogel is a material with three-dimensional network structure, which has a series of advantages, such as injectability, self-heal ability, easy loading and controllability of drug release, and excellent biocompatibility. Therefore, it is extensively used in drug delivery, antibacterial, anti-cancer and other fields. However, the traditional hydrogels have the single performance, and therapeutic efficacy is often rely on the drugs loaded on them to cure diseases, which cannot achieve sustainable therapeutic effect. In order to solve this problem, photothermal nano hydrogel with photothermal agent (PTA) has become an ideal material due to its excellent physical and chemical properties. Photothermal nano hydrogels used in photothermal therapy (PTT) can exploit the photothermal effect of photothermal agent to increase local temperature and control the sol-gel phase transition behavior of hydrogels, so they are widely used in drug release, photothermal sterilization, photothermal inhibition of cancer cells and enhancement of bone repair. To sum up, this paper introduces the preparation of hydrogels with photothermal nanomaterials, and discusses their applications in the fields of drug release, photothermal sterilization, photothermal cancer cell inhibition and enhanced bone repair.

Quantum dots in the biomedical world: A smart advanced nanocarrier for multiple venues application

Quantum dots (QDs) are semiconducting nanoparticles having different optical and electrical properties when compared to larger particles. They exhibit photoluminescence when irradiated with ultraviolet light, which is due to the transition of an excited electron from the valence band to the conductance band followed by the return of the exciting electron back into the valence band. The size and material of QDs can affect their optical and other properties too. The QDs possess special attributes like high brightness, protection from photobleaching, photostability, color tunability, low toxicity, low production cost, a multiplexing limit, and a high surface-to-volume proportion, which make them a promising tool for biomedical applications. Here, in this study, we summarize the utilization of QDs in different applications including bioimaging, diagnostics, immunostaining, single-cell analysis, drug delivery, and protein detection. Moreover, we discuss the advantages and challenges of using QDs in biomedical applications when compared with other conventional tools.

In Vitro Study: Synthesis and Evaluation of Fe3O4/CQD Magnetic/Fluorescent Nanocomposites for Targeted Drug Delivery, MRI, and Cancer Cell Labeling Applications

In the present study, first, Fe₃O₄ nanoparticles were functionalized using glutaric acid and then composited with CQDs. Doxorubicin (DOX) drug was loaded to evaluate the performance of the nanocomposite for targeted drug delivery applications. The XRD pattern confirmed the presence of characteristic peaks of CQDs and Fe₃O₄. In the FTIR spectrum, the presence of carboxyl functional groups on Fe₃O₄/CQDs was observed; DOX (positive charge) is loaded onto Fe₃O₄/CQDs (negative charge) by electrostatic absorption. FESEM and AFM images showed that the particle sizes of Fe₃O₄ and CQDs were 23-75 and 1-3 nm, respectively. The hysteresis curves showed superparamagnetic properties for Fe₃O₄ and Fe₃O₄/CQDs (57.3 and 8.4 emu/g). The Fe₃O₄ hysteresis curve showed superparamagnetic properties (Ms and Mr: 57.3 emu/g and 1.46 emu/g. The loading efficiency and capacity for Fe₃O₄/CQDs were 93.90% and 37.2 mg DOX/g MNP, respectively. DOX release from Fe₃O₄/CQDs in PBS showed pH-dependent release behavior where after 70 h at pH 5 and 7.4, about 50 and 21% of DOX were released. Fluorescence images of Fe₃O₄/CQD-treated cells showed that Fe₃O₄/CQDs are capable of labeling MCF-7 and HFF cells. Also, T₂-weighted MRI scans of Fe₃O₄/CQDs in water exhibited high r₂ relaxivity (86.56 mM^-1 S^-1). MTT assay showed that DOX-loaded Fe₃O₄/CQDs are highly biocompatible in contact with HFF cells (viability = 95%), but they kill MCF-7 cancer cells (viability = 45%). Therefore, the synthesized nanocomposite can be used in MRI, targeted drug delivery, and cell labeling.

Alginate-enabled green synthesis of S/Ag1.93S nanoparticles, their photothermal property and in-vitro assessment of their anti-skin-cancer effects augmented by a NIR laser

We report herein the design and synthesis of colloidally-stable S/Ag_1.93S nanoparticles, their photothermal conversion properties and in vitro cytotoxicity toward A431 skin cancer cells under the excitation of a minimally-invasive 980 nm near-infrared (NIR) laser. Micron-sized S particles were first synthesized via acidifying Na₂S₂O₃ using biocompatible sodium alginate as a surfactant. In the presence of AgNO₃ and under rapid microwave-induced heating, alginate reduced AgNO₃ to nascent Ag which reacted with molten S in situ to S/Ag_1.93S nanoparticles. The nanoparticles were characterized using a combination of X-ray diffraction, electron microscopies, elemental analysis, zeta-potential analysis and UV-VIS-NIR spectroscopy. The average particles size was controlled between 40 and 60 nm by fixing the mole ratio of Ag⁺:S₂O₃^2-. When excited by a 980 nm laser, S/Ag_1.93S nanoparticles (~40 nm) produced with the least amount of AgNO₃ exhibited a respectable photothermal conversion efficiency of circa 62% with the test aqueous solution heated to a hyperthermia-inducing 52 °C in 15 min. At 0.7 W/cm², the viability of A431 skin cancer cells incubated with 7.0 ± 0.2 μg/mL of S/Ag_1.93S nanoparticles reduced to 14 ± 0.6%, while an A431 cell control maintained an 80% cell viability. These results suggested that S/Ag_1.93S nanoparticles may have good potential in reducing metastatic skin carcinoma.

Encapsulation of AgInS2/GaSx core/shell quantum dots in In-fumarate metal–organic frameworks for stability enhancement

Silver indium sulfide/gallium sulfide (AgInS2/GaSx) core/shell quantum dots (QDs), among the cadmium-free alternatives that possess a narrow band-edge emission, have attracted immense attention in recent years. However, the insufficient stability...

A. Hamid MH, Kusrini E, Lim JW, Hobley J, Usman A. Antimicrobial activity of silver sulfide quantum dots functionalized with highly conjugated Schiff bases in a one-step synthesis

In the present paper, low-dimensional Ag₂S QDs were fabricated for the first time, with four different dithiocarbazate derivative Schiff bases (SB) as capping agents in a one-pot synthesis. These SB-capped Ag₂S QDs were almost spherical with an average size range of 4.0 to 5.6 nm, which is slightly smaller than conventional thioglycolic acid (TGA)-capped Ag₂S QDs. We demonstrate that the growth of Gram-positive bacteria (Bacillus subtillus and Staphylococcus aureus), Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa), and a prevalent fungal pathogen (Candida albicans) are inhibited more when the bacterial and fungal cells were nurtured with the synthesized SB-Ag₂S QDs, compared with TGA-Ag₂S QDs or free unbound Schiff bases. The minimum inhibitory concentration (MIC) results confirmed that even low concentrations of SB-Ag₂S QDs were able to inhibit bacterial (MIC 5–75 μg mL⁻¹) and fungal growth (MIC 80–310 μg mL⁻¹), and in some cases they performed better than streptomycin (8–25 μg mL⁻¹). Lethality bioassay results confirmed that SB-Ag₂S QDs were not toxic to brine shrimp (Artemia salina). The results show that capping agents are essential in the design of functional Ag₂S QDs, and highlight that Schiff bases provide an excellent opportunity to optimize the biological activities of silver based QDs.

In the present paper, low-dimensional Ag₂S QDs were fabricated for the first time, with four different dithiocarbazate derivative Schiff bases (SB) as capping agents in a one-pot synthesis.

Self-assembly patterns of non-metalloid silver thiolates: structural, HR-ESI-MS and stability studies

Screening of AgNO₃/AgS^tBu solutions in DMF, DMSO and NMP resulted in the isolation of three novel nanosized silver/thiolate complexes with a torus-like {Ag₂₀(S^tBu)₁₀} core. The structures of [NO₃@Ag₂₀(S^tBu)₁₀(NO₃)₉(DMF)₆] (1) and [NO₃@Ag₂₀(^tBuS)₁₀(NO₃)₈(NMP)₈][NO₃@Ag₁₉(^tBuS)₁₀(NO₃)₈(NMP)₆]₂(NO₃) (2) were studied by single crystal X-ray diffraction (SCXRD). The self-assembly process leading to 1 can be switched to a different outcome using Br^-, resulting in [Br@Ag₁₆(S^tBu)₈(NO₃)₅(DMF)₃](NO₃)₂ (3), which is the one of the few genuine host-guest complexes in the silver/thiolate systems. Solutions of the individual complexes in CH₃CN were studied by HR-ESI-MS techniques, which revealed a dynamic behavior for each complex, driven by a redistribution of the {AgNO₃} units. This dynamics results in the appearance of both cationic and anionic species, based on unchanged silver-thiolate cores. Daylight causes degradation of 3 with the formation of a composite material based on defective orthorhombic Ag₂S with a porous morphology, as observed using the SEM technique. The electrocatalytic HER activity of such a material was studied.

Silver chalcogenide nanoparticles: a review of their biomedical applications

Silver chalcogenide (Ag2X, where X = S, Se, or Te) nanoparticles have been extensively investigated for their applications in electronics but have only recently been explored for biomedical applications. In the past 10 years, Ag2X, primarily silver sulfides at first, have become of great importance as quantum dots, since they not only possess excellent deep tissue imaging properties in the near-infrared regions I and II, but also have low toxicities. Their appealing properties have led to numerous recent developments of Ag2X for biomedical applications. Furthermore, Ag2X have been discovered in the past 2-3 years to be potent X-ray contrast agents, adding to the numerous biomedical uses of these nanoparticles. In this review, we discuss the most recent advances in silver chalcogenide nanoparticle use in areas such as bio-imaging, theranostics, and biosensors. Moreover, we examine the advances in synthetic approaches for these nanoparticles, which include aqueous and organic syntheses routes. Finally, we discuss the advantages and current limitations in the use of silver chalcogenides for different biomedical applications and their potential for advancement and expansions in use.

Synthesis, Properties and Bioimaging Applications of Silver-Based Quantum Dots

Ag-based quantum dots (QDs) are semiconductor nanomaterials with exclusive electrooptical properties ideally adaptable for various biotechnological, chemical, and medical applications. Silver-based semiconductor nanocrystals have developed rapidly over the past decades. They have become a promising luminescent functional material for in vivo and in vitro fluorescent studies due to their ability to emit at the near-infrared (NIR) wavelength. In this review, we discuss the basic features of Ag-based QDs, the current status of classic (chemical) and novel methods ("green" synthesis) used to produce these QDs. Additionally, the advantages of using such organisms as bacteria, actinomycetes, fungi, algae, and plants for silver-based QDs biosynthesis have been discussed. The application of silver-based QDs as fluorophores for bioimaging application due to their fluorescence intensity, high quantum yield, fluorescent stability, and resistance to photobleaching has also been reviewed.