Rapid Separation and Efficient Removal of Cd Based on Enhancing Surface Precipitation by Carbonate-Modified Biochar

Biochar as a partner of plants and beneficial microorganisms to assist in-situ bioremediation of heavy metal contaminated soil

Synergistic remediation of heavy metal (HM) contaminated soil using beneficial microorganisms (BM) and plants is a common and effective in situ bioremediation method. However, the shortcomings of this approach are the low colonisation of BM under high levels of heavy metal stress (HMS) and the poor state of plant growth. Previous studies have overlooked the potential of biochar to mitigate the above problems and aid in-situ remediation. Therefore, this paper describes the characteristics and physicochemical properties of biochar. It is proposed that biochar enhances plant resistance to HMS and aids in situ bioremediation by increasing colonisation of BM and HM stability. On this basis, the paper focuses on the following possible mechanisms: specific biochar-derived organic matter regulates the transport of HMs in plants and promotes mycorrhizal colonisation via the abscisic acid signalling pathway and the karrikin signalling pathway; promotes the growth-promoting pathway of indole-3-acetic acid and increases expression of the nodule-initiating gene NIN; improvement of soil HM stability by ion exchange, electrostatic adsorption, redox and complex precipitation mechanisms. And this paper summarizes guidelines on how to use biochar-assisted remediation based on current research for reference. Finally, the paper identifies research gaps in biochar in the direction of promoting beneficial microbial symbiotic mechanisms, recognition and function of organic molecules, and factors affecting practical applications.

Molecular engineering of a new method for effective removal of cadmium from water

Cadmium (Cd) is a widespread and highly toxic environmental pollutant, seriously threatening animal and plant growth. Therefore, monitoring and employing robust tools to enrich and remove Cd from the environment is a major challenge. In this work, by conjugating a fluorescent indicator (CCP) with a functionalized glass slide, a special composite material (CCPB) was constructed to enrich, remove, and monitor Cd2+ in water rapidly. Then Cd2+ could be effectively eluted by immersing the Cd-enriched CCPB in an ethylenediaminetetraacetic acid (EDTA) solution. With this, the CCPB was continuously reused. Its recovery of Cd2+was above and below 100 % after multiple uses by flame atomic absorption spectrometry (FAAS), which was excellent for practical use in enriching and removing Cd2+ in real aqueous samples. Therefore, CCPB is an ideal material for monitoring, enriching, and removing Cd2+ in wastewater, providing a robust tool for future practical applications of Cd enrichment and removal in the environment.

Utilization of biochar for remediation of heavy metals in aqueous environments: A review and bibliometric analysis

Biochar usage for removing heavy metals from aqueous environments has emerged as a promising research area with significant environmental and economic benefits. Using the PICO approach, the research question aimed to explore using biochar to remove heavy metals from aqueous media. We merged the data from Scopus and the Web of Science Core Collection databases to acquire a comprehensive perspective of the subject. The PRISMA guidelines were applied to establish the search parameters, identify the appropriate articles, and collect the bibliographic information from the publications between 2010 and 2022. The bibliometric analysis showed that biochar-based heavy metal remediation is a research field with increasing scholarly attention. The removal of Cr(VI), Pb(II), Cd(II), and Cu(II) was the most studied among the heavy metals. We identified five main clusters centered on adsorption, water treatment, adsorption models, analytical techniques, and hydrothermal carbonization by performing keyword co-occurrence analysis. Trending topics include biochar reusability, modification, acid mine drainage (AMD), wastewater treatment, and hydrochar. The reutilization of heavy metal-loaded spent biochar includes transforming it into electrodes for supercapacitors or stable catalyst materials. This study provides a comprehensive overview of biochar-based heavy metal remediation in aquatic environments and highlights knowledge gaps and future research directions.

Strontium alleviated the growth inhibition and toxicity caused by cadmium in rice seedlings

Cadmium (Cd) contamination of rice is an urgent ecological and agricultural problem. Strontium (Sr) has been shown to promote plant growth. However, the effect of Sr on rice seedlings under Cd stress is currently unclear. In this work hydroponic experiments were used to assess the impact of Sr on rice seedling growth under Cd stress. The findings demonstrated that foliar application of 0.5 mg L-1 Sr had no discernible impact on the development of rice seedlings. However, Sr significantly alleviated growth inhibition and toxicity in rice seedlings when threatened by Cd. Compared with the Cd treatment (Cd, 2.5 mg L-1), the root length, shoot height, and whole plant length of rice seedlings in the Cd + Sr treatment (Cd, 2.5 mg L-1; Sr, 0.5 mg L-1) increased by 4.96 %, 12.47 % and 9.60 %, respectively. The content of Cd in rice decreased by 23.34 % (roots) and 5.79 % (shoots). Sr lessened the degree of membrane lipid peroxidation damage (lower MDA concentration) among the seedlings of rice under Cd stress by controlling the activities of antioxidant enzymes and GSH content. By changing the expression of antioxidant enzyme-encoding genes and downregulating the heavy metal transporter gene (OsNramp5), Sr reduced accumulation and the detrimental effects of Cd on rice seedlings. Our study provides a new solution to the problem of Cd contamination in rice, which may promote the safe production of rice and benefit human health.

Enhanced Cr (VI) reduction and removal by Fe/Mn oxide biochar composites under acidic simulated wastewater

Chromium (Cr (VI)) can cause severe damage to the ecosystem and humans because of its toxicity. In this paper, the adsorbed Fe/Mn ions Bacillus cereus ZNT-03, lotus seeds, and graphene oxide were co-cultured as the raw materials. Fe/Mn oxide biochar composite (FMBC) was prepared to treat Cr (VI) by one-step pyrolysis. FMBC has high-density micropores, and the average pore size is about 0.82 nm. Fe (II), Mn (II), and N-containing functional groups could serve as electron donors for Cr (VI) reduction. The removal of Cr (VI) is monolayer chemisorption and pH-dependent. The maximum adsorption capacity of FMBC is 21.25 mg g^-1. Cr (VI) is reduced and adsorbed on FMBC by physical adsorption, reduction, complexation, electrostatic attraction, and coprecipitation. The contribution ratio of the reduction mechanism to Cr (VI) is 72.25%. The packed column and regeneration experiments indicated that FMBC had excellent adsorption stability even after soaking in acidic simulated wastewater after 180 days (pH 1.5). These results indicate that FMBC can provide rapid reduction and efficient adsorption for Cr (VI), making it possible to apply in water treatment.

Highly efficient Cd(Ⅱ) removal using 3D N-doped carbon derived from MOFs: Performance and mechanisms

Cadmium (Cd) removal is imperative to ensure the safety of aquatic-ecosystem, yet its effective removal technology has remained elusive by far. To address this concern, three-dimensional N-doped carbon (NC) polyhedrons affording ample porosity is fabricated based upon the thermal carbonization and KOH activation of zeolitic imidazolate framework-8 (ZIF-8) precursor. Thus-derived activated NC (a-NC) adsorbent not only overcomes the inherent instability of ZIF-8 but also harvests a maximum Cd(Ⅱ) adsorption capacity of 370.2 mg g^-1, which evidently surpasses those of bare NC counterpart as well as previously reported adsorbents. Impressively, a-NC achieves ca. 100% removal of aqueous Cd(Ⅱ) in a broad working pH range (5-9), and particularly attains stable performances (81-92%) in various realistic water. Theoretical calculations in combination with experimental characterizations further offer mechanistic insight into the enhanced removal exerted by a-NC. Notably, owing to the increased specific surface area (3041 vs. 389 m² g^-1) and enhanced sp² carbon content (91.7 vs. 68.8%) of a-NC as compared to NC, advanced Cd(Ⅱ) adsorption via a-NC can be exhibited. Our designed a-NC material harnessing favorable recycling capability would be in particular attractive in the realm of practical Cd(Ⅱ) remediation.