Improvement in the Filtration Performance of an Ultraporous Nanofiber Membrane by Atmospheric Pressure Plasma-Induced Surface Modification

Desalination technologies, membrane distillation, and electrospinning, an overview

Water is a critical component for humans to survive, especially in arid lands or areas where fresh water is scarce. Hence, desalination is an excellent way to effectuate the increasing water demand. Membrane distillation (MD) technology entails a membrane-based non-isothermal prominent process used in various applications, for instance, water treatment and desalination. It is operable at low temperature and pressure, from which the heat demand for the process can be sustainably sourced from renewable solar energy and waste heat. In MD, the water vapors are gone through the membrane's pores and condense at permeate side, rejecting dissolved salts and non-volatile substances. However, the efficacy of water and biofouling are the main challenges for MD due to the lack of appropriate and versatile membrane. Numerous researchers have explored different membrane composites to overcome the above-said issue, and attempt to develop efficient, elegant, and biofouling-resistant novel membranes for MD. This review article addresses the 21st-century water crises, desalination technologies, principles of MD, the different properties of membrane composites alongside compositions and modules of membranes. The desired membrane characteristics, MD configurations, role of electrospinning in MD, characteristics and modifications of membranes used for MD are also highlighted in this review.

Nanogradient Hydrophilic/Hydrophobic Organosilica Membranes Developed by Atmospheric-Pressure Plasma to Enhance Pervaporation Performance

Organosilica membranes are a promising candidate for pervaporation dehydration owing to their tunable molecular sieving characteristics and excellent hydrothermal stability. Herein, we report a facile modification using an atmospheric-pressure water vapor plasma to enhance the pervaporation performance of organosilica membranes. The surface of methyl-terminated organosilica membranes was treated by water vapor plasma to develop an ultrathin separation active layer suitable for pervaporation dehydration. The surface hydrophilicity was increased by water vapor plasma due to oxidative decomposition of methyl groups to form silanol groups. The plasma-modified layer had a thickness of several nanometers and had a silica-like structure due to the condensation of silanol groups. The plasma-modified organosilica membranes exhibited an improved molecular sieving property owing to the formation of highly cross-linked siloxane networks with a pore size of approximately 0.4 nm. The membranes also exhibited an excellent permselectivity in the dehydration of alcohols due to the nanometer-thick separation active layer with controlled pore size and increased hydrophilicity. The plasma-modified membranes showed high H₂O permeance exceeding 10^-6 mol m^-2 s^-1 Pa^-1 with permeance ratios for H₂O/EtOH and H₂O/IPA of 517-3050 and >10 000, respectively, in the dehydration of 90 wt % aqueous solutions at 50 °C, which is among the highest permselectivities for silica-based membranes. Furthermore, the plasma-modified membranes displayed highly efficient dehydration performance for a H₂O/MeOH mixture. The H₂O permeance and H₂O/MeOH permeance ratio in the dehydration of a 90 wt % MeOH aqueous solution at 50 °C were (2.3-3.0) × 10^-6 mol m^-2 s^-1 Pa^-1 and 31-143, respectively, which exceeded the permeance-selectivity trade-off of conventional membranes including polymeric, silica-based, and zeolite membranes. The results indicate that the proposed plasma-assisted approach can enhance the pervaporation performance of organosilica membranes via the modification under atmospheric pressure and at room temperature.