Drug Delivery from PCL/Chitosan Multilayer Coatings for Metallic Implants

Cellulose Acetate and Polycaprolactone Fibre Coatings on Medical-Grade Metal Substrates for Controlled Drug Release

This study explores a method that has the potential to be cost effective in inhibiting biofilm formation on metallic prostheses, thereby preventing rejection or the requirement for replacement. A cost-effective metal alloy used in biomedical implants was chosen as the substrate, and ibuprofen (Ibu), a well-known anti-inflammatory drug, was selected for drug release tests for its widespread availability and accessibility. Multilayer coatings consisting of cellulose acetate (CA), polycaprolactone (PCL), and chitosan (CHI), with or without ibuprofen (Ibu) content, were applied onto medical-grade stainless steel (SS-316 type) through electrospinning, electrospray, or blow spinning. The adhesion of the CA, PCL, and layered CA/PCL membranes, with thicknesses ranging from 20 to 100 μm, to SS substrates varied between 0.15 N and 0.22 N without CHI, which increased to 0.21 and 0.74 N, respectively, when a CHI interlayer was introduced by electrospraying between the SS and the coatings. Although drug release in a simulated body fluid (SBF) medium is predominantly governed by diffusion-driven mechanisms in all single- and multilayer coatings, a delayed release was noted in CA coatings containing Ibu when overlaid with a PCL coating produced by blow spinning. This suggests avenues for further investigations into combinations of multilayer coatings, both with and without drug-imbued layers.

Three-Dimensional Melted Electrowriting Drug Coating Fibers for the Prevention of Device-Associated Infections: A Pilot Study

Medical device-related infections (DRIs), especially prevalent among critically ill patients, impose significant health and economic burdens and are mainly caused by bacteria. Severe infections often necessitate device removal when antibiotic therapy is inefficient, delaying recovery. To tackle this issue, PCL drug-eluting coated meshes were explored, and they were printed via melt electrowriting (MEW). These meshes were coated with gentamicin sulfate (GS) and tetracycline hydrochloride (TCH) and underwent FTIR analysis to confirm drug integration. Antimicrobial activity was assessed via agar diffusion assays and biofilm formation assays against bacterial strains: Pseudomonas aeruginosa ATCC 27853, Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 43300, and Staphylococcus epidermidis ATCC 35984. FTIR analysis evidenced the presence of the drugs in the meshes. TCH displayed broad-spectrum antimicrobial activity against all strains, whereas GS was effective against all except S. aureus. These findings indicate the potential of cost-effective ultra-fine drug coating fibers for medical device applications, offering infection prevention during implantation. This preliminary study demonstrates the feasibility of producing drug-eluting fibers for DRI prevention through a non-toxic, fast, and cost-efficient technique, paving the way for enhanced patient care and reduced healthcare costs.

Chitosan-based materials for dental implantology: A comprehensive review

Chitosan, a versatile biopolymer, has gained recognition in the discipline of dental implantology due to possessing salient properties. This comprehensive review explores the potential of chitosan in dental implants, focusing on its biocompatibility, bioactivity, and the various chitosan-based materials that have been utilized for dental implant therapy. The review also highlights the importance of surface treatment in dental implants to enhance osseointegration and inhibit bacterial biofilm formation. Additionally, the chemical structure, properties, and sources of chitosan are described, along with its different structural forms. The characteristics of chitosan particularly color, molecular weight, viscosity, and degree of deacetylation are discussed about their influence on its applications. This review provides valuable insights into the promising utilization of polymeric chitosan in enhancing the success and functionality of dental implants. This study highlights the potential applications of chitosan in oral implantology. Chitosan possesses various advantageous properties, including muco-adhesiveness, hemostatic action, biocompatibility, biodegradability, bioactivity, and antibacterial and antifungal activities, which enhance its uses in dental implantology. However, it has limited aqueous solubility at the physiological pH, which sometimes restricts its biological application, but this problem can be overcome by using modified chitosan or chitosan derivatives, which have also shown encouraging results. Recent research suggests that chitosan may act as a promising material for coating titanium-based implants, improving osteointegration together with antibacterial properties.

Spin-Coating Fabrication Method of PDMS/NdFeB Composites Using Chitosan/PCL Coating

This paper verified the possibility of applying chitosan and/or ferulic acid or polycaprolactone (PCL)-based coatings to polydimethylsiloxane/neodymium-iron-boron (PDMS/NdFeB) composites using the spin-coating method. The surface modification of magnetic composites by biofunctional layers allows for the preparation of materials for biomedical applications. Biofunctional layered magnetic composites were obtained in three steps. The spin-coating method with various parameters (time and spin speed) was used to apply different substances to the surface of the composites. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were used to analyze the thickness and surface topography. The contact angle of the obtained surfaces was tested. Increasing spin speed and increasing process time for the same speed resulted in decreasing the composite's thickness. The linear and surface roughness for the prepared coatings were approximately 0.2 μm and 0.01 μm, respectively, which are desirable values in the context of biocompatibility. The contact angle test results showed that both the addition of chitosan and PCL to PDMS have reduced the contact angle θ from 105° for non-coated composite to θ~59-88° depending on the coating. The performed modifications gave promising results mainly due to making the surface hydrophilic, which is a desirable feature of projected biomaterials.

Material and Design Toolkit for Drug Delivery: State of the Art, Trends, and Challenges

The nanomaterial and related toolkit have promising applications for improving human health and well-being. Nanobased drug delivery systems use nanoscale materials as carriers to deliver therapeutic agents in a targeted and controlled manner, and they have shown potential to address issues associated with conventional drug delivery systems. They offer benefits for treating various illnesses by encapsulating or conjugating biological agents, chemotherapeutic drugs, and immunotherapeutic agents. The potential applications of this technology are vast; however, significant challenges exist to overcome such as safety issues, toxicity, efficacy, and insufficient capacity. This article discusses the latest developments in drug delivery systems, including drug release mechanisms, material toolkits, related design molecules, and parameters. The concluding section examines the limitations and provides insights into future possibilities.

The Importance of Chitosan Coatings in Dentistry

A Chitosan is a copolymer of N-acetyl-D-glucose amine and D-glucose amine that can be easily produced. It is a polymer that is widely utilized to create nanoparticles (NPs) with specific properties for applications in a wide range of human activities. Chitosan is a substance with excellent prospects due to its antibacterial, anti-inflammatory, antifungal, haemostatic, analgesic, mucoadhesive, and osseointegrative qualities, as well as its superior film-forming capacity. Chitosan nanoparticles (NPs) serve a variety of functions in the pharmaceutical and medical fields, including dentistry. According to recent research, chitosan and its derivatives can be embedded in materials for dental adhesives, barrier membranes, bone replacement, tissue regeneration, and antibacterial agents to improve the management of oral diseases. This narrative review aims to discuss the development of chitosan-containing materials for dental and implant engineering applications, as well as the challenges and future potential. For this purpose, the PubMed database (Medline) was utilised to search for publications published less than 10 years ago. The keywords used were "chitosan coating" and "dentistry". After carefully selecting according to these keywords, 23 articles were studied. The review concluded that chitosan is a biocompatible and bioactive material with many benefits in surgery, restorative dentistry, endodontics, prosthetics, orthodontics, and disinfection. Furthermore, despite the fact that it is a highly significant and promising coating, there is still a demand for various types of coatings. Chitosan is a semi-synthetic polysaccharide that has many medical applications because of its antimicrobial properties. This article aims to review the role of chitosan in dental implantology.

Polysaccharide-Based Coatings as Drug Delivery Systems

Therapeutic polysaccharide-based coatings have recently emerged as versatile strategies to transform a conventional medical implant into a drug delivery system. However, the translation of these polysaccharide-based coatings into the clinic as drug delivery systems still requires a deeper understanding of their drug degradation/release profiles. This claim is supported by little or no data. In this review paper, a comprehensive description of the benefits and challenges generated by the polysaccharide-based coatings is provided. Moreover, the latest advances made towards the application of the most important representative coatings based on polysaccharide types for drug delivery are debated. Furthermore, suggestions/recommendations for future research to speed up the transition of polysaccharide-based drug delivery systems from the laboratory testing to clinical applications are given.