Gold Nanoparticles Supported on Alumina as a Catalyst for Surface Plasmon-Enhanced Selective Reductions of Nitrobenzene

In Situ UV-Vis-NIR Absorption Spectroscopy and Catalysis

This review highlights in situ UV-vis-NIR range absorption spectroscopy in catalysis. A variety of experimental techniques identifying reaction mechanisms, kinetics, and structural properties are discussed. Stopped flow techniques, use of laser pulses, and use of experimental perturbations are demonstrated for in situ studies of enzymatic, homogeneous, heterogeneous, and photocatalysis. They access different time scales and are applicable to different reaction systems and catalyst types. In photocatalysis, femto- and nanosecond resolved measurements through transient absorption are discussed for tracking excited states. UV-vis-NIR absorption spectroscopies for structural characterization are demonstrated especially for Cu and Fe exchanged zeolites and metalloenzymes. This requires combining different spectroscopies. Combining magnetic circular dichroism and resonance Raman spectroscopy is especially powerful. A multitude of phenomena can be tracked on transition metal catalysts on various supports, including changes in oxidation state, adsorptions, reactions, support interactions, surface plasmon resonances, and band gaps. Measurements of oxidation states, oxygen vacancies, and band gaps are shown on heterogeneous catalysts, especially for electrocatalysis. UV-vis-NIR absorption is burdened by broad absorption bands. Advanced analysis techniques enable the tracking of coking reactions on acid zeolites despite convoluted spectra. The value of UV-vis-NIR absorption spectroscopy to catalyst characterization and mechanistic investigation is clear but could be expanded.

Annealing temperature effects on monolayer WS2-veiled Ag nanoparticle array for surface catalytic reaction

Plasmonic-WS2 hybrids have attracted widespread interest for plasmon driven catalytic reactions. In this work, a Ag nanoparticles (NPs)/WS2 hybrid was fabricated by utilizing a one-step anodized Al template-assisted vacuum thermal evaporation technique and wet transfer method. To optimize the catalytic performance, the morphological evolution and corresponding changes in the catalytic properties of the Ag NPs/WS2 hybrid at different thermal annealing temperatures were investigated. It was found that the surface-enhanced Raman scattering (SERS) and catalytic activity of the hybrid were optimized by tuning the annealing temperature, with the optimal SERS and catalytic properties observed at 290 °C. These results may open new avenues for improving the efficiency and expanding the research field of plasmon-driven reactions.

Gold-Manganese Bimetallic Redox Coupling with Light

The classical Au(I)/Au(III) redox couple chemistry has been limited to constructing C-C and C-X bonds, and thus, the exploration of the elementary reaction of gold redox coupling is very significant to enrich its organometallic features. Herein, we report the first visible-light-mediated, external oxidant-free Au(I)/Au(III) redox couple using commercially available Mn2(CO)10 to generate Mn-Au(III)-Mn intermediates for bimetallic redox coupling. A wide range of structurally diverse heterodinuclear and polynuclear L-Au(I)-Mn-L' complexes (19 examples, up to >99% yields) are readily constructed, providing a robust strategy for the concise construction of Au-Mn complexes under mild reaction conditions. The mechanistic studies together with DFT calculations support the radical oxidative addition of •Mn(CO)5 to gold and bimetallic reductive elimination mechanisms from highly active Mn-Au(III)-Mn species, representing an important step toward an elementary reaction in gold chemistry research. Furthermore, the resulting Au-Mn complexes exhibit unique catalytic activity, with which divergent reductive coupling of nitroarenes can readily afford azoxybenzenes, azobenzenes, and hydrazobenzenes in moderate to good yields.

Recent Advances in the Synthesis of Aromatic Azo Compounds

Aromatic azo compounds have -N=N- double bonds as well as a larger π electron conjugation system, which endows aromatic azo compounds with wide applications in the fields of functional materials. The properties of aromatic azo compounds are closely related to the substituents on their aromatic rings. However, traditional synthesis methods, such as the coupling of diazo salts, have a significant limitation with respect to the structural design of aromatic azo compounds. Therefore, many scientists have devoted their efforts to developing new synthetic methods. Moreover, recent advances in the synthesis of aromatic azo compounds have led to improvements in the design and preparation of light-response materials at the molecular level. This review summarizes the important synthetic progress of aromatic azo compounds in recent years, with an emphasis on the pioneering contribution of functional nanomaterials to the field.

Design of an AIE-Active Flexible Self-Assembled Monolayer Probe for Trace Nitroaromatic Compound Explosive Detection

In this work, a series of molecules TPE-PA-n (n = 3-11) were designed with classic aggregation-induced emission (AIE) 1,1,2,2-tetraphenylethene (TPE) for self-assembled monolayers (SAMs), which are applied for the detection of trace nitroaromatic compound (NAC) explosives. Phosphoric acid that acts as an anchor is used to connect with TPE through alkyl chains of various lengths. It is found that the alkyl chains play a role in pulling TPE luminogens to aggregate for light emission, which can affect the fluorescence and sensing performance of the SAMs. Ulteriorly, a model is built to explore the influence of the alkyl chain length on the device performance, which is determined by the three effects of the alkyl chain: flexibility, the coupling effect, and the odd-even effect. By comparison, the functional molecules with the chain length of 8 were finally selected and further applied for NAC sensors. By means of fluorescence spectra, the SAM sensor was proved to have good stability, reversibility, selectivity, and sensitivity, and its detection limits for trinitrotoluene, dinitrotoluene, and nitrobenzene were 1.2, 6.0, and 35.7 ppm, respectively. This work provides new ideas for the design and preparation of flexible sensors for trace NAC detection with high performance, low cost, and easy operation.

Stability of supported aerosol-generated nanoparticles in liquid media

The stability of nanoparticles and their supports are critical, but poorly understood, parameters for applications of such systems in liquid environments. Here we develop an approach to systematically investigate the stability of aerosol-generated nanoparticles after exposure to commonly used solvents using a combination of identical location-SEM and density/size analysis. We demonstrate that the choice of solvent needs to be carefully matched with both the particle and support materials. We show that thermal annealing significantly increases the adhesion of the particles and expands the scope of applications in aqueous media and for biological applications. The results clarify combinations of inorganic nanoparticles on oxide and semiconductor supports with solvents and environmental conditions that give sufficient stability. Combined, the presented methods should be of value in investigating the stability of nanoparticle systems after exposure to solvent and can be used for future developments of high-performing supported aerosol-generated nanoparticles for solvent-based applications.

Co–Nx catalyst: an effective catalyst for the transformation of nitro compounds into azo compounds

The selective hydrogenation of nitro compounds into their corresponding azo compounds is challenging in organic synthesis.

Selectivity control of organic chemical synthesis over plasmonic metal-based photocatalysts

The factors, issues, and design of plasmonic metal-based photocatalysts for selective photosynthesis of organic chemicals have been discussed.

Selective Photoinduced Reduction of Nitroarenes to N-Arylhydroxylamines

We report the selective photoinduced reduction of nitroarenes to N-arylhydroxylamines. The present methodology facilitates this transformation in the absence of catalyst or additives and uses only light and methylhydrazine. This noncatalytic photoinduced transformation proceeds with a broad scope, excellent functional-group tolerance, and high yields. The potential of this protocol reflects on the selective and straightforward conversion of two general antibiotics, azomycin and chloramphenicol, to the bioactive hydroxylamine species.

Highly Selective Synthesis of Hydrazoarenes from Nitroarenes via Polystyrene-Supported Au-Nanoparticle-Catalyzed Reduction: Application to Azoarenes, Aminoarenes, and 4,4'-Diaminobiaryls

A selective synthesis of hydrazoarene from nitroarene and its application are reported. Using polystyrene (PS) resins as solid supports for Au nanoparticles (AuNPs), polystyrene-supported Au nanoparticles (AuNPs@PS) were synthesized and characterized. In the presence of AuNPs@PS (1.0 mol %) as a catalyst, nitroarenes afforded corresponding hydrazoarenes (up to 99%) with high selectivity (up to 100%) under mild reaction conditions (NaBH₄, 50% aq. EtOH, and room temperature). Depending on the reaction conditions (the amount of NaBH₄, the substituent of nitroarenes, and the sequential addition of HCl), nitroarenes were converted to corresponding azoarenes (up to 95%), aminoarenes (up to 99%), and 4,4'-diaminobiaryls (up to 99%). Our easily recyclable catalytic system using a solid-phase reaction vessel provides an attractive synthetic method in an eco-friendly and sustainable manner.

On the catalytic transfer hydrogenation of nitroarenes by a cubane-type Mo3S4 cluster hydride: disentangling the nature of the reaction mechanism

Cubane-type Mo₃S₄ cluster hydrides decorated with phosphine ligands are active catalysts for the transfer hydrogenation of nitroarenes to aniline derivatives in the presence of formic acid (HCOOH) and triethylamine (Et₃N). The process is highly selective and most of the cluster species involved in the catalytic cycle have been identified through reaction monitoring. Formation of a dihydrogen cluster intermediate has also been postulated based on previous kinetic and theoretical studies. However, the different steps involved in the transfer hydrogenation from the cluster to the nitroarene to finally produce aniline remain unclear. Herein, we report an in-depth computational investigation into this mechanism. Et₃N reduces the activation barrier associated with the formation of Mo-HHOOCH dihydrogen species. The global catalytic process is highly exergonic and occurs in three consecutive steps with nitrosobenzene and N-phenylhydroxylamine as reaction intermediates. Our computational findings explain how hydrogen is transferred from these Mo-HHOOCH dihydrogen adducts to nitrobenzene with the concomitant formation of nitrosobenzene and the formate substituted cluster. Then, a β-hydride elimination reaction accompanied by CO₂ release regenerates the cluster hydride. Two additional steps are needed for hydrogen transfer from the dihydrogen cluster to nitrosobenzene and N-phenylhydroxylamine to finally produce aniline. Our results show that the three metal centres in the Mo₃S₄ unit act independently, so the cluster can exist in up to ten different forms that are capable of opening a wide range of reaction paths. This behaviour reveals the outstanding catalytic possibilities of this kind of cluster complexes, which work as highly efficient catalytic machines.

Tackling the Scalability Challenge in Plasmonics by Wrinkle-Assisted Colloidal Self-Assembly

Electromagnetic radiation of a certain frequency can excite the collective oscillation of the free electrons in metallic nanostructures using localized surface plasmon resonances (LSPRs), and this phenomenon can be used for a variety of optical and electronic functionalities. However, nanostructure design over a large area using controlled LSPR features is challenging and requires high accuracy. In this article, we offer an overview of the efforts made by our group to implement a wrinkle-assisted colloidal particle assembly method to approach this challenge from a different angle. First, we introduce the controlled wrinkling process and discuss the underlying theoretical framework. We then set out how the wrinkled surfaces are utilized to guide the self-assembly of colloidal nanoparticles of various surface chemistry, size, and shape. Subsequently, template-assisted colloidal self-assembly mechanisms and a general guide for particle assembly beyond plasmonics will be presented. In addition, we also discuss the collective plasmonic behavior in depth, including strong plasmonic coupling due to nanoscale gap size as well as magnetic mode excitation and demonstrate the potential applications of wrinkle-assisted colloidal particle assembly method in the field of mechanoresponsive metasurfaces and surface-enhanced spectroscopy. Lastly, a general perspective in the field of template-assisted colloidal assembly with regard to potential applications in plasmonic photocatalysis, solar cells, optoelectronics, and sensing devices is provided.

Simple and Practical Synthesis of Various New Nickel Boride-Based Nanocomposites and their Applications for the Green and Expeditious Reduction of Nitroarenes to Arylamines under Wet-Solvent-Free Mechanochemical Grinding

In this paper, we report a simple synthesis of four new nickel boride-based nanocomposites, namely Ni2B@ZrCl4, Ni2B@Cu2O, Ni2B@CuCl2 and Ni2B@FeCl3, from commercially available and cheap starting materials. All of the new Ni2B-based nanocomposites were well characterized by Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Further, the catalytic applications of these new nanocomposites were successfully evaluated in the wet-solvent-free reduction of aromatic nitro compounds to arylamines with sodium borohydride (NaBH4) at room temperature by a mechanochemical grinding technique. All the introduced catalytic systems provide excellent yields of arylamines in very short reaction times for a wide range of substrates. Also, recoverability and reusability of the new nanocomposites were investigated.