Aqueous-System-Enabled Spray-Drying Technique for the Synthesis of Hollow Polycrystalline ZIF-8 MOF Particles

Drug-Facilitated Crystallization of Spray-Dried CD-MOFs with Tunable Morphology, Porosity, And Dissolution Profile

Metal-organic frameworks (MOFs) with versatile functionalities have applications in environmental science, sensor separation, catalysis, and drug delivery. In particular, MOFs used in drug delivery should be biodegradable and easy to control. In this study, spray-dried cyclodextrin-based MOFs (CD-MOFs) with tunable crystallinity, porosity, and dissolution properties were fabricated. The spray-drying precursor properties, such as ethanol volume ratio, incubation time, and precursor concentration, were optimized for controlled crystallization. On the basis of the morphology, X-ray diffraction peak intensity, and specific surface areas of the spray-dried CD-MOF products, they were categorized as amorphous, partially crystalline, and highly crystalline. An active pharmaceutical ingredient ketoconazole (KCZ) was introduced into the precursor to prepare KCZ-containing CD-MOFs. The surface areas of these products were greater by 3-fold (292 m2/g) than that of the plain CD-MOF (94.1 m2/g) prepared using the same parameters. The presence of KCZ in the hydrophobic cavity between the two γ-CD molecules was correlated to the CD-MOF crystal growth. Additionally, CD-MOF particles exhibited different dissolution behaviors on the basis of the position of KCZ in the MOF. These spray-dried CD-MOFs with tunable morphology, specific surface area, and dissolution could have potential applications in various fields.

Cyclodextrin-metal-organic frameworks in molecular delivery, detection, separation, and capture: An updated critical review

Metal-organic frameworks (MOFs) are coordination compounds with tuneable structures and controllable functions. However, the biological toxicity of traditional MOFs materials is often inevitable, making their application in the biological field have many limitations. Therefore, frontier research increasingly focuses on developing biocompatible MOFs materials. Cyclodextrins (CDs), derived from starch, are favored by various biomaterials due to their good biosafety and are often seen in the preparation and application of MOFs materials. This review describes the features of MOFs materials, and the various preparation methods of CD-MOFs are analyzed in detail from the perspective of CD classification. Additionally, the promising applications of CD-MOFs materials for delivery, detection, separation, and capture of active molecules in recent studies are systematically discussed and summarized. In terms of safety, the CD-MOFs materials are meticulously summarized. Finally, this review presents the challenges and future prospects regarding the current CD-MOFs-based materials, which will shed new light on the application of such materials in various fields.

Construction of a polyoxometalate-based magnetic composite MOF for the effective adsorption of cationic dyes

Adsorption and separation of dyes are extremely important as they damage the water environment and human health. ZIF-8 has the benefits of large specific surface area, explicit structure and a good confinement effect on POM, which can better facilitate the synergetic effect of POM and ZIF-8. Therefore, ZIF-8 was chosen as the support material to wrap H₃PW₁₂O₄₀. In the present work, magnetic ZIF-8@H₃PW₁₂O₄₀ composites were prepared by a facile impregnation synthesis strategy and applied to the adsorption of cationic dyes with methylene blue (MB) as a representative. Compared with the other three prepared materials, Fe₃O₄@ZIF-8@H₃PW₁₂O₄₀ exhibited the best adsorption performance. The adsorption process conformed to the pseudo-second-order model and the Langmuir model, and the adsorption reaction was spontaneous with the maximum adsorption capacity of up to 431.03 mg g^-1 within 20 min. The electrostatic attraction has been testified to be the major driving force of the adsorption process, and the material can still hold 90% of the max adsorption capacity after 5 cycles, which serve as the foundation for its further applications in the field of adsorption.

A simple and versatile synthesis strategy of hollow MOFs for CO2 separation and catalysis

A novel single-solvent-interfacial strategy is proposed to synthesize hollow MOFs, fabricated at the two-phase interface originated from the self-deliquescence of hydration water in the metallic precursors and the solvents with low water solubility. The as-fabricated HMOFs with hierarchically porous structures exhibit significant enhancement in CO₂ separation and catalysis.

Facile and single-step entrapment of chloramphenicol in ZIF-8 and evaluation of its performance in killing infectious bacteria with high loading content and controlled release of the drug

CLN@ZIF-8 was prepared by trapping chloramphenicol during ZIF-8 synthesis with high DLC and DLE. It showed H2O2-sensitive controlled release with higher drug release under the simulated infectious conditions and short-time antibacterial activity.

Decorating graphene oxide with zeolitic imidazolate framework (ZIF-8) and pseudo-boehmite offers ultra-high adsorption capacity of diclofenac in hospital effluents

This study reports on an easy and scalable synthesis method of a novel magnetic nanocomposite (GO/ZIF-8/γ-AlOOH) based on graphene oxide (GO) nanosheets decorated with zeolitic imidazolate framework-8 (ZIF-8), pseudo-boehmite (γ-AlOOH), and iron oxide (Fe₃O₄) nanoparticles by combining solvothermal and solid-state dispersion (SSD) methods. The nanocomposite was successfully applied to remove of diclofenac sodium (DCF) - a widely used pharmaceutical - from water. Response Surface Methodology (RSM) was used to optimize the adsorption process and assess the interactions among the influencing factors on DCF removal efficiency; including contact time, adsorbent dosage, initial pH, solution temperature, and DCF concentration. Adsorption isotherm results showed a good fitting with the Langmuir isotherm model with an exceptional adsorption capacity value of 2594 mg g^-1 at 30 °C, which was highly superior to the previously reported adsorbents. In addition, kinetic and thermodynamic investigations further illustrated that the adsorption process was fast (equilibrium time = 50 min) and endothermic. The regeneration of GO/ZIF-8/γ-AlOOH nanocomposite using acetic acid solution (10% v/v) after a simple magnetic separation was confirmed in five consecutive cycles, which eliminate the usage of organic solvents. The nanocomposite has also shown a superior performance in treating a simulated hospital effluent that contained various pharmaceuticals as well as other organic, and inorganic constituents.

Recent advances in the shaping of metal–organic frameworks

In this review, the recent advances in the shaping of MOFs are overviewed, and some promising strategies recently developed are highlighted, including templated shaping, self-shaping, shaping on substrates, and shaping with sacrificial materials.

A Simple Step toward Enhancing Hydrothermal Stability of ZIF-8

ZIF-8 is a flexible zeolitic imidazole-based metal-organic framework and has been extensively studied because of its high structural stability. However, ZIF-8 is hydrolyzed in water at higher temperature, resulting in degradation of its crystalline and porous structure. In order to prevent ZIF-8 from structural collapse due to the hydrolysis reaction of the metal-ligand bond and/or ligand substitution reaction, it is effective to shield the metal-ligand bond from the attack of water molecules. This work reports on the thermal and hydrothermal stability of mechanochemically synthesized ZIF-8 and presents an incredibly simple step to modify the outermost surface of ZIF-8, improving the hydrothermal stability. The partial carbonization resulting in the formation of a carbon-rich outermost layer endowed ZIF-8 with not only high hydrothermal stability but also a high adsorption rate on liquid phase adsorption.

Hollow Functional Materials Derived from Metal-Organic Frameworks: Synthetic Strategies, Conversion Mechanisms, and Electrochemical Applications

Hollow materials derived from metal-organic frameworks (MOFs), by virtue of their controllable configuration, composition, porosity, and specific surface area, have shown fascinating physicochemical properties and widespread applications, especially in electrochemical energy storage and conversion. Here, the recent advances in the controllable synthesis are discussed, mainly focusing on the conversion mechanisms from MOFs to hollow-structured materials. The synthetic strategies of MOF-derived hollow-structured materials are broadly sorted into two categories: the controllable synthesis of hollow MOFs and subsequent pyrolysis into functional materials, and the controllable conversion of solid MOFs with predesigned composition and morphology into hollow structures. Based on the formation processes of hollow MOFs and the conversion processes of solid MOFs, the synthetic strategies are further conceptually grouped into six categories: template-mediated assembly, stepped dissolution-regrowth, selective chemical etching, interfacial ion exchange, heterogeneous contraction, and self-catalytic pyrolysis. By analyzing and discussing 14 types of reaction processes in detail, a systematic mechanism of conversion from MOFs to hollow-structured materials is exhibited. Afterward, the applications of these hollow structures as electrode materials for lithium-ion batteries, hybrid supercapacitors, and electrocatalysis are presented. Finally, an outlook on the emergent challenges and future developments in terms of their controllable fabrications and electrochemical applications is further discussed.

Vapor-Phase Synthesis of ZIF-8 MOF Thick Film by Conversion of ZnO Nanorod Array

ZIF-8 metal organic framework "micrometer-thick" films were constructed from ZnO precursor by a vapor-phase synthesis. The ZnO-to-ZIF-8 crystal transformation proceeded in the presence of 2-methylimidazole (Hmim) vapor. Continuous coatings of intergrown ZIF-8 crystals require control of a nucleation density. The dependence of ZnO crystal plane on the ZnO-to-ZIF-8 crystal transformation was investigated using four bulk ZnO single crystals: a-plane (11-20), c-plane (0001), m-plane (10-10), and r-plane (10-11). It was revealed that the m-plane (10-10) of ZnO is more effectively transformed into ZIF-8. In this work, highly oriented ZnO nanorod array film was used to provide the transport pathway of Hmim molecules and volume expansion space of ZnO-to-ZIF-8 crystal transformation for nucleation and crystal intergrowth. The high conversion of ZnO nanorod array into ZIF-8 in a short time could be achieved because (1) such mass transfer is easy due to the uniform internanorod distance being maintained during reaction and (2) the surface of the nanorod array is dominated by the highly reactive m-plane (10-10).

Spray drying of zeolitic imidazolate frameworks: investigation of crystal formation and properties

The mechanism of crystal growth for ZIFs (ZIF-67 and Zn/Co-ZIF) is explored for the first time using the spray-drying technique.