Multifunctional Biochar for Highly Efficient Capture, Identification, and Removal of Toxic Metals and Superbugs from Water Samples

Definitive Review of Nanobiochar

Nanobiochar is an advanced nanosized biochar with enhanced properties and wide applicability for a variety of modern-day applications. Nanobiochar can be developed easily from bulk biochar through top-down approaches including ball-milling, centrifugation, sonication, and hydrothermal synthesis. Nanobiochar can also be modified or engineered to obtain "engineered nanobiochar" or biochar nanocomposites with enhanced properties and applications. Nanobiochar provides many fold enhancements in surface area (0.4-97-times), pore size (0.1-5.3-times), total pore volume (0.5-48.5-times), and surface functionalities over bulk biochars. These enhancements have given increased contaminant sorption in both aqueous and soil media. Further, nanobiochar has also shown catalytic properties and applications in sensors, additive/fillers, targeted drug delivery, enzyme immobilization, polymer production, etc. The advantages and disadvantages of nanobiochar over bulk biochar are summarized herein, in detail. The processes and mechanisms involved in nanobiochar synthesis and contaminants sorption over nanobiochar are summarized. Finally, future directions and recommendations are suggested.

Spatial behavior and source tracking of extracellular antibiotic resistance genes in a chlorinated drinking water distribution system

Antibiotic resistance genes (ARGs) are receiving increasing concerns due to the antibiotic resistance crisis. Nevertheless, little is known about the spatial behavior and sources of extracellular ARGs (eARGs) in the chlorinated drinking water distribution systems (DWDSs). Here, tap water was continuously collected to reveal the occurrence of both eARGs and intracellular ARGs (iARGs) along a chlorinated DWDS. Afterward, the correlation between eARGs, eDNA-releasing communities, and communities of planktonic bacteria was further analyzed. The eARG concentration decreased significantly, whereas the proportion of vanA and bla_NDM-1 increased. Further, the diversity of the eDNA-releasing community increased markedly with increasing distance from the drinking water treatment plant (DWTP). Moreover, the dominant eDNA-releasing bacteria shifted from Acinetobacter, Pseudomonas, and Methylobacterium-Methylorubrum in finished water from the DWTP to Bacteroides, Faecalibacterium, Staphylococcus, and Parabacteroides in the DWDS. In terms of eARG source, thirty genera were significantly correlated with seven types of eARGs that resulted from the lysis of dead planktonic bacteria and detached biofilms. Conversely, the iARGs concentration increased, whereas the biodiversity of the planktonic bacteria community decreased in the sampling points along the DWDSs. Our findings provide critical insights into the spatial behavior and sources of eARGs, highlighting the health risks associated with ARGs in DWDSs.

Evaluating coal char as an alternative to biochar for mitigating nutrient and carbon loss from manure-amended soils: Insights from a greenhouse experiment

Animal manure has been increasingly adopted as a more sustainable substitute for synthetic fertilizers but might result in increased dissolved organic C (DOC) and phosphate (PO₄ ^3- ) leaching and elevated greenhouse gas emissions from soil. Biochar may reduce nutrient loss from manure-amended soils, but large-scale application has been hindered, in part, by its high cost. Minimum cost alternatives, such as incomplete coal combustion residue (char), may provide a more viable option to farmers, but char needs to be analyzed in comparison to high-temperature pine biochar before recommendations can be made. We valuated losses of soil C, N, and P, as well as plant yields and changes in microbial biomass, in two contrasting soils amended with dairy slurry or swine lagoon wastewater and with biochar or coal char over 105 d. Dissolved organic C leaching decreased with addition of biochar or char (0.6-27% or 1.6-36%), independent of soil texture and manure type. Leaching of PO₄ ^3- was reduced by biochar (15-24%) and char (38-50%) in the silt loam. Soil N leaching increased after char application (likely due to our high application rate) but was unaffected by biochar. Char reduced CO₂ emissions from the sandy loam by 9.7-54%, whereas both biochar and char increased CO₂ emissions in the silt loam by 38-48% during plant root senescence. Depending on soil characteristics, char may outcompete biochar with respect to reduction of PO₄ ^3- and DOC leaching. Unlike biochar, some char-N is available, and this should be accounted for when considering application rates.

Biochar as a Biocompatible Mild Anti-Inflammatory Supplement for Animal Feed and Agricultural Fields

Biochar is an organic material and high in carbon content, besides its use for energy purposes, it is also a material that serves the purpose of improving soil fertility, organic matter content of soils and removing heavy metals from water and soil. This study aims to investigate the antimicrobial effects of biochar whose beneficial effects on agricultural productivity has been proven by different studies. Scientific literature concerning the antibacterial, antifungal, and antiviral effects of the apricot seed and olive seed biochar is limited. Biochar applications may help to alter the microbial diversity by modifying biological environment either in agriculture or in animal husbandry. Moreover, biochar has been used in animal husbandry to improve animal health especially by regulating the intestinal flora and inflammation in the intestines. Hence, in our study, we investigated the effect of biochar on the growth of Aspergillus niger, Cryphonectria parasitica, Phytophthora cinnamomi, Plenodomus tracheiphilus, Enterococcus casseliflavus, Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli and two different bacteriophage strains. Biochar did not have any direct effect on the growth of either Gram-positive or Gram-negative bacteria, bacteriophages, and fungi. In order to test their direct effects on the immune cells, mammalian macrophages were used and biochar directly reduced the inflammatory cytokine levels produced by the in vitro activated macrophages.

Field grand challenge with emerging superbugs and the novel coronavirus (SARS-CoV-2) on plastics and in water

This opinion paper reports field grand challenges associated with plastic and water contaminated with the novel coronavirus (severe acute respiratory syndrome coronavirus 2, SARS-CoV-2) and superbugs, given the emergency of public health and environmental protection from the presence of lethal viruses and bacteria. Two primary focuses of detection and treatment methods for superbugs and the novel coronavirus (SARS-CoV-2) are investigated, and the future outlook is provided based on grand challenges identified in the water field. Applying conventional treatment technologies to treat superbugs or the novel coronavirus (SARS-CoV-2) has brought negative results, including ineffective treatment, formation of toxic byproducts, and limitation of long-term performance. Existing detection methods are not feasible to apply in terms of sensitivity, difficulty of applications in field samples, speed, and accuracy at the time of sample collection. Few studies are found on superbugs or adsorption of the novel coronavirus (SARS-CoV-2) on plastic, as well as effects of superbugs or the novel coronavirus (SARS-CoV-2) on treatment of plastic waste and wastewater. With the need for and directions of further research and challenges discussed in this paper, we believe that this opinion paper offers information useful to a wide audience, including scientists, policy makers, consultants, public health workers, and field engineers in the water sector.

Development of Human Host Defense Antimicrobial Peptide-Conjugated Biochar Nanocomposites for Combating Broad-Spectrum Superbugs

Infectious diseases by multidrug-resistant superbugs, which cannot be cured using commercially available antibiotics, are the biggest threat for our society. Due to the lack of discovery of effective antibiotics in the last two decades, there is an urgent need for the design of new broad-spectrum antisuperbug biomaterials. Herein, we report the development of antisuperbug nanocomposites using human host defense antimicrobial peptide-conjugated biochar. To develop an economically viable technology, biochar, a carbon-rich material from naturally abundant resource, has been used. For combating broad-spectrum superbugs, a nanocomposite has been designed by combining biochar with α-defensin human neutrophil peptide-1 (HNP-1), human β-defensin-1 (hBD-1), and human cathelicidin LL-37 antimicrobial peptide. The designed three-dimensional (3D) nanocomposites with pore size between 200 and 400 nm have been used as channels for water passage and captured superbugs. The reported data demonstrated that antimicrobial nanocomposite can be used for efficient capture and eradication of Gram-negative carbapenem-resistant Enterobacteriaceae (CRE) Escherichia coli (E. coli) and Klebsiella pneumoniae (KPN) superbugs, as well as Gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant enterococci (VRE) superbugs. Possible mechanisms for broad-spectrum antisuperbug activities using hydrogel have been discussed.

Application of biochar in advanced oxidation processes: supportive, adsorptive, and catalytic role

The advanced oxidation processes (AOPs), especially sulphate radical (SO₄^•-)-based AOPs (SR-AOPs), have been considered more effective, selective, and prominent technologies for the removal of highly toxic emerging contaminants (ECs) due to wide operational pH range and relatively higher oxidation potential (2.5-3.1 V). Recently, biochar (BC)-based composite materials have been introduced in AOPs due to the dual benefits of adsorption and catalytic degradation, but the scientific review of BC-based catalysts for the generation of reactive oxygen species (ROSs) through radical- and non-radical-oriented routes for EC removal was rarely reported. The chemical treatments, such as acid/base treatment, chemical oxidation, surfactant incorporation, and coating and impregnation of minerals, were applied to make BC suitable as supporting materials (SMs) for the loading of Fenton catalysts to boost up peroxymonosulphate/persulphate/H₂O₂ activation to get ROSs including ^•OH, SO₄^•-, ¹O₂, and O₂^•- for targeted pollutant degradation. In this review, all the possible merits of BC-based catalysts including supportive, adsorptive, and catalytic role are summarised along with the possible route for the development prospects of BC properties. The limitations of SR-AOPs especially on production of non-desired oxyanions, as well as disinfection intermediates and their potential solutions, have been identified. Lastly, the knowledge gap and future-oriented research needs are highlighted.

A simple method for the synthesis of biochar nanodots using hydrothermal reactor

Biochar is a stable carbon rich by-product synthesized through pyrolysis of plant and animal based biomass, and nano-biochar material has gained increasing attention due to its unique properties for environmental applications. In the present study, a simple cost-effective method for the synthesis of biochar nanoparticles through hydrothermally using agricultural residuals and by-products was developed. Both soybean straw and cattle manure were selected as the feedstock to produce the bulk-biochar. The synthesis procedure involved the digestion of the bulk-biochar with concentrated nitric acid and sulfuric acid in a high pressure condition using a hydrothermal reactor. The suspension was isolated using vacuum filtration with 0.22-μm membrane followed by drying at 65 °C in an oven. Scanning electron microscopy results revealed that both of the biochars had a well-developed porous structure following pyrolysis. Both transmission electron microscopy and the dynamic light scattering results of the hydrothermally treated biochar indicated that the soybean straw and cattle manure biochar nanodots had an average of 5-nm and 4-nm in size, respectively. Overall two raw materials produced 8.5–10% biochar nanodots. The present method presents a simple, quick and cost-effective method for synthesis of biochar nanodots. The method provided a useful tool discovering the applicability biochar nanodots for environmental applications.

• Nano-biochar formation from bulk-biochar using hydrothermal reactor

• Evaluate nano-biochar's environmental fate and behavior in soil and water

• Synthesize multifunctional adsorbent using nano-biochar as primary material

Critical review of magnetic biosorbents: Their preparation, application, and regeneration for wastewater treatment

The utilisation of magnetic biosorbents (metal or metal nanoparticles impregnated onto biosorbents) has attracted increasing research attention due to their manipulable active sites, specific surface area, pore volume, pore size distribution, easy separation, and reusability that are suitable for remediation of heavy metal(loid)s and organic contaminants. The properties of magnetic biosorbents (MB) depend on the raw biomass, properties of metal nanoparticles, modification/synthesis methods, and process parameters which influence the performance of removal efficiency of organic and inorganic contaminants. There is a lack of information regarding the development of tailored materials for particular contaminants and the influence of specific characteristics. This review focuses on the synthesis/modification methods, application, and recycling of magnetic biosorbents. In particular, the mechanisms and the effect of sorbents properties on the adsorption capacity. Ion exchanges, electrostatic interaction, precipitation, and complexation are the dominant sorption mechanisms for ionic contaminants whereas hydrophobic interaction, interparticle diffusion, partition, and hydrogen bonding are the dominant adsorption mechanisms for removal of organic contaminants by magnetic biosorbents. In generally, low pyrolysis temperatures are suitable for ionic contaminants separation, whereas high pyrolysis temperatures are suitable for organic contaminants removal. Additionally, magnetic properties of the biosorbents are positively correlated with the pyrolysis temperatures. Metal-based functional groups of MB can contribute to an ion exchange reaction which influences the adsorption capacity of ionic contaminants and catalytic degradation of non-persistent organic contaminants. Metal modified biosorbents can enhance adsorption capacity of anionic contaminants significantly as metal nanoparticles are not occupying positively charged active sites of the biosorbents. Magnetic biosorbents are promising adsorbents in comparison with other adsorbents including commercially available activated carbon, and thermally and chemically modified biochar in terms of their removal capacity, rapid and easy magnetic separation which allow multiple reuse to minimize remediation cost of organic and inorganic contaminants from wastewater.

Magnetic palm kernel biochar potential route for phenol removal from wastewater

The pollution of water resources due to the disposal of industrial wastes that have organic material like phenol is causing worldwide concern because of their toxicity towards aquatic life, human beings and the environment. Phenol causes nervous system damage, renal kidney disease, mental retardation, cancer and anaemia. In this study, magnetic palm kernel biochar is used for removal of phenol from wastewater. The effect of parameters such as pH, agitation speed, contact time and magnetic biochar dosage are validated using design of experiments. The statistical analysis reveals that the optimum conditions for the highest removal (93.39%) of phenol are obtained at pH of 8, magnetic biochar dosage of 0.6 g, agitation speed at 180 rpm and time of 60 min with the initial concentration of 10 mg/L. The maximum adsorption capacities of phenol were found to be 10.84 mg/g and Langmuir and Freundlich isotherm models match the experimental data very well and adsorption kinetic obeys a pseudo-second order. Hence, magnetic palm kernel can be a potential candidate for phenol removal from wastewater.

NanoRefinery of carbonaceous nanomaterials: Complementing dairy manure gasification and their applications in cellular imaging and heavy metal sensing

This article describes an efficient method, combining chemical oxidation and acetone extraction, to produce carbonaceous nanomaterials from dairy manure biochar. The optical and mechanical properties are similar to methods previously reported carbonaceous nanomaterials from biomass. Our novel process cuts the processing time in half and drastically reduces the energy input required. The acetone extraction produced 10 fractions with dairy manure biochar-derived carbonaceous nanomaterials (DMB-CNs). The fraction with the carbonaceous nanomaterials, DMB-CN-E1, with highest fluorescence was selected for in-depth characterisation and for initial testing across a range of applications. DMB-CN-E1 was characterised using atomic force microscope, electrophoresis, and spectrophotometric methods. DMB-CN-E1 exhibited a lateral dimension between 11 and 28 nm, a negative charge, and excitation/emission maxima at 337/410 nm, respectively. The bioimaging potential of DMB-CN-E1 evidenced different locations and different interactions with the cellular models evaluated. DMB-CN-E1 was quenched by several heavy metal ions showing a future application of these materials in heavy metal ion detection and/or removal. The demonstrated capabilities in bioimaging and environmental sensing create the opportunity for generating added-value nanomaterials (NanoRefinery) from dairy manure biochar gasification and, thus, increasing the economic viability of gasification plants.

Multivariate analysis of biochar-derived carbonaceous nanomaterials for detection of heavy metal ions in aqueous systems

This article focuses on implementing multivariate analysis to evaluate biochar-derived carbonaceous nanomaterials (BCN) from three different feedstocks for the detection and differentiation of heavy metal ions in aqueous systems. The BCN were produced from dairy manure, rice straw and sorghum straw biochar using our NanoRefinery process. The NanoRefinery process transforms biochar into advanced nanomaterials using depolymerisation/chemical oxidation and purification of nanomaterials using solvent extraction. Dairy manure biochar-derived carbonaceous nanomaterials (DMB-CN), rice straw biochar-derived carbonaceous nanomaterials (RSB-CN) and sorghum straw biochar-derived carbonaceous nanomaterials (SSB-CN) were utilised as probes for the evaluation of their fluorescent properties and the detection of heavy metal ions. The BCN fluorescence quenching and fluorescence recovery was tested with lead (Pb²⁺), nickel (Ni²⁺), copper (Cu²⁺) and mercury (Hg²⁺). Principal component analysis (PCA) and discriminant analysis were used to differentiate among heavy metal ions in water samples. The BCN from different feedstocks had different characteristics and produced different interactions with heavy metal ions. DMB-CN had the highest quenching for Hg²⁺ and Ni²⁺ while SSB-CN and RSB-CN responded best to Cu²⁺ and Pb²⁺, respectively. The fluorescence quenching was modelled using linear and empirical functions. PCA and discriminant analysis used the quenching measurements to differentiate heavy metal ions in aqueous system. A key result was that the discriminant analysis had a 100% accuracy to detect Pb²⁺, 66% for Ni²⁺ and Cu²⁺, and 33% for Hg²⁺. This study has shown that biochar-derived carbonaceous nanomaterials could be used in heavy metal ions sensing applications. This is the first step in the development of a fast and accurate method for the detection of heavy metal ions in waters using environmentally friendly BCN.

Microalgae biochar-derived carbon dots and their application in heavy metal sensing in aqueous systems

This research seeks a coupled solution for managing the large amounts of biochar produced by microalgae biofuel production, and the necessity for novel, economic and accurate heavy metal sensing methods. Therefore, this study evaluated the transformation of microalgae biochar (MAB) into carbon dots (Cdots) and their subsequent application as heavy metal ion sensors in aqueous systems. The experimental phase included the transformation of MAB into microalgae biochar-derived carbon dots (MAB-Cdots), MAB-Cdot characterisation and the evaluation of the MAB-Cdots as transducers for the detection of four heavy metal ions (Pb²⁺, Cu²⁺, Cd²⁺, and Ni²⁺). MAB-Cdot fluorescence was stable over a wide range of pH and resistant to photo-bleaching, making them suitable as fluorescence probes. The MAB-Cdot fluorescence was quenched by all of the metal ions and displayed different quenching levels. Depending upon the ions involved, MAB-Cdots were used to detect the presence of heavy metal ions from concentrations of 0.012 μM up to 2 mM by measuring the reduction in fluorescence intensity. Neutral and slightly alkaline pHs were optimal for Cu²⁺ Ni²⁺ and Pb²⁺ heavy metal quenching. To quantify the concentration of the heavy metal ions, linear and logarithmic functions were used to model the MAB-Cdot fluorescence quenching. The sensing mechanism was determined to be reversible and purely collisional with some fluorophores less accessible than the others. This work demonstrated the ability to produce Cdots from microalgae biochar, examined their application as a transducer for detecting heavy metal ions in aqueous systems and paves the way for novel sensing systems using MAB-Cdots.

Adsorption-assisted decontamination of Hg(ii) from aqueous solution by multi-functionalized corncob-derived biochar

Mercury (Hg) contamination of wastewater streams as a result of anthropogenic activities is a great threat to living organisms due to its acute toxicity.