Facile Water-Based Strategy for Synthesizing MoO3-x Nanosheets: Efficient Visible Light Photocatalysts for Dye Degradation

Electrochromic Devices Based on 2D MoO3-x/PEDOT:PSS Composite Film with Boosted Ion Transport

Electrochromic materials allow for optical modulation and have attracted much attention due to their bright future in applications such as smart windows and energy-saving displays. Two-dimensional (2D) molybdenum oxide nanoflakes with combined advantages of high active specific surface area and natural layered structure should be highly potential candidates for electrochromic devices. However, the efficient top-down preparation of 2D MoO3 nanoflakes is still a huge challenge and the sluggish ionic kinetics hinder its electrochromic performance. Herein, we demonstrated a feasible thiourea-assisted exfoliation procedure, which can not only increase the yield but also reduce the thickness of 2D MoO3-x nanoflakes down to a few nanometers. Furthermore, electrophoretic-deposited MoO3-x nanoflakes were combined with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-conjugated polymer to simultaneously enhance the ionic kinetics and electronic conductivity, with a diffusion coefficient of 3.09 × 10-10 cm2 s-1 and a charge transport resistance of 33.7 Ω. The prepared 2D MoO3-x/PEDOT:PSS composite films exhibit improved electrochromic performance, including fast switching speed (7 s for bleaching, 5 s for coloring), enhanced coloration efficiency (87.1 cm2 C-1), and large transmittance modulation (ΔT = 65%). This study shows outstanding potential for 2D MoO3-x nanoflakes in electrochromic applications and opens new avenues for optimizing the ion transport in inorganic-organic composites, which will be possibly inspired for other electrochemical devices.

Mucilage-assisted fabrication of molybdenum trioxide nanostructures for photothermal ablation of breast cancer cells

Nanostructures have been used for various biomedical applications due to their optical, antibacterial, magnetic, antioxidant, and biocompatible properties. Cancer is a prevalent disease that severely threatens human life and health. Thus, innovative and effective therapeutic approaches are urgently required for cancer. Photothermal therapy (PTT) is a promising approach to killing cancer cells. In this investigation, we developed a low-cost, simple, green technique to fabricate molybdenum trioxide nanostructures (MNs) using Opuntia ficus-indica mucilage as a template. Moreover, the MNs were functionalized with folic acid (FA) for cancer PTT. The X-ray diffractometer results revealed that the prepared MNs have an orthorhombic crystal phase. The transmission electron microscope image of MNs shows a flake shape with 20-150 nm diameter. The cytotoxicity of MNs and FA-conjugated MNs was studied in vitro. These cell viability assay results suggested that fabricated MoO3 nanostructures reduced 25% of cell viability in MCF-7 cells, even at high doses. However, even with high-dose treatment, FA/MNs do not cause significant cell death. Acridine orange/ethidium bromide (AO/EB) staining revealed DNA and chromatin condensation in MCF-7 cells exposed to MNs. Overall, the in vitro study results suggested that FA/MNs have excellent biocompatibility, which applies to biomedical applications. MNs dispersion temperature gradually increases from 26 to 58°C under 808 nm laser irradiation. We found significant mortality rates after NIR irradiation in MNs- or FA/MNs-treated MCF-7 cells. These findings suggest that FA/MNs can be used as an effective photothermal agent to treat breast cancer.

Frankincense-Based Functionalized Multiwalled Carbon Nanotubes with Iron Oxide Composites for Efficient Removal of Crystal Violet: Kinetic and Equilibrium Analysis

In this study, novel adsorbents were developed by functionalizing multiwalled carbon nanotubes with frankincense (Fr-fMWCNT) and adding iron oxide (Fe3O4) to the adsorbent (Fr-fMWCNT-Fe3O4). The morphology, surface characteristics, and chemical nature of the synthesized samples were analyzed by using various characterization techniques. The prepared adsorbents were then applied for the elimination of the toxic dye, crystal violet (CV), from water-based solutions by employing a batch adsorption method. The effectiveness of materials for the adsorption of CV was investigated by tuning various effective experimental parameters (adsorbent dosage, dye quantity, pH, and contact time). In order to derive adsorption isotherms, the Langmuir and Freundlich adsorption models were investigated and compared. The Fr-fMWCNT and Fr-fMWCNT-Fe3O4 were found to remove 85 and 95% of the CV dye within 30 min of the adsorption experiment at pH 6, respectively. It was found that a pseudo-second-order reaction rate was consistent with the experimental adsorption kinetics. The equilibrium data demonstrated that the Langmuir model adequately explained the adsorption behavior of the CV dye on the Fr-fMWCNT and Fr-fMWCNT-Fe3O4 surfaces, respectively. According to the Langmuir study, the highest adsorption capacities of the dye are 434 mg/g for Fr-fMWCNT and 500 mg/g for Fr-fMWCNT-Fe3O4. Remediation of the CV dye using our novel composite materials has not been reported previously in the literature. The synthesized Fr-fMWCNT and Fr-fMWCNT-Fe3O4 adsorbents can be economical and green materials for the adsorptive elimination of CV dye from wastewater.

Tunable, Wide-Temperature, and Macroscale Superlubricity Enabled by Nanoscale Van Der Waals Heterojunction-to-Homojunction Transformation

Achieving macroscale superlubricity of van der Waals (vdW) nanopowders is particularly challenging, due to the difficulty in forming ordered junctions before friction and the friction-induced complex contact restructuration among multiple nanometer-sized junctions. Here, a facile way is reported to achieve vdW nanopowder-to-heterojunction conversion by graphene edge-oxygen (GEO) incorporation. The GEO effectively weakens the out-of-plane edge-edge and in-plane plane-edge states of the vdW nanopowder, leading to a coexistent structure of nanoscale homojunctions and heterojunctions on the grinding balls. When sliding on diamond-like carbon surfaces, the ball-supported structure governs macroscale superlubricity by heterojunction-to-homojunction transformation among the countless nanoscale junctions. Furthermore, the transformation guides the tunable design of superlubricity, achieving superlubricity (µ ≈ 0.005) at wide ranges of load, velocity, and temperature (-200 to 300 °C). Atomistic simulations reveal the GEO-enhanced conversion of vdW nanopowder to heterojunctions and demonstrate the heterojunction-to-homojunction transformation superlubricity mechanism. The findings are of significance for the macroscopic scale-up and engineering application of structural superlubricity.

An introductory review on advanced multifunctional materials

This review summarizes the applications of some of the advanced materials. It included the synthesis of several nanoparticles such as metal oxide nanoparticles (e.g., Fe₃O₄, ZnO, ZrOSO₄, MoO_3-x, CuO, AgFeO₂, Co₃O₄, CeO₂, SiO₂, and CuFeO₂); metal hydroxide nanosheets (e.g., Zn₅(OH)₈(NO₃)₂·2H₂O, Zn(OH)(NO₃)·H₂O, and Zn₅(OH)₈(NO₃)₂); metallic nanoparticles (Ag, Au, Pd, and Pt); carbon-based nanomaterials (graphene, graphene oxide (GO), graphitic carbon nitride (g-C₃N₄), and carbon dots (CDs)); biopolymers (cellulose, nanocellulose, TEMPO-oxidized cellulose nanofibers (TOCNFs), and chitosan); organic polymers (e.g. covalent-organic frameworks (COFs)); and hybrid materials (e.g. metal-organic frameworks (MOFs)). Most of these materials were applied in several fields such as environmental-based technologies (e.g., water remediation, air purification, gas storage), energy (production of hydrogen, dimethyl ether, solar cells, and supercapacitors), and biomedical sectors (sensing, biosensing, cancer therapy, and drug delivery). They can be used as efficient adsorbents and catalysts to remove emerging contaminants e.g., inorganic (i.e., heavy metals) and organic (e.g., dyes, antibiotics, pesticides, and oils in water via adsorption. They can be also used as catalysts for catalytic degradation reactions such as redox reactions of pollutants. They can be used as filters for air purification by capturing carbon dioxide (CO₂) and volatile organic compounds (VOCs). They can be used for hydrogen production via water splitting, alcohol oxidation, and hydrolysis of NaBH₄. Nanomedicine for some of these materials was also included being an effective agent as an antibacterial, nanocarrier for drug delivery, and probe for biosensing.

A single-step plasma method for rapid production of 2D, ferromagnetic, surface vacancy-engineered MoO3-xnanomaterials, for photothermal ablation of cancer

A rapid, clean plasma-chemical technique is demonstrated here, for cost-effective, synthesis of surface vacancy engineered, 2D, molybdenum-oxide nanomaterials, during a one-step, integrated synthesis-hydrogenation process for biomedical applications. A laminar plasma beam populated with O and H radicals impinges on a molybdenum target, out of which molybdenum-oxide nanomaterials are very rapidly generated with controlled surface O vacancies. 2D, dark-blue coloured, nano-flake/ribbon like MoO_3-xis produced maximum up to 194 g h^-1, the core of which still remains as stoichiometric molybdenum-oxide. These nanomaterials can get heated-up by absorbing energy from a near-infrared (NIR) laser, which enable them as photothermal therapy (PTT) candidate material for the invasive precision therapy of cancer. The surface defects endows the products with robust ferromagnetism at room temperature conditions (maximum saturation-magnetization: 6.58 emu g^-1), which is order of magnitude stronger than most other vacancy engineered nanomaterials. These nanometric metal-oxides are observed to be perfectly compatible in animal physiological environment and easily dispersed in an aqueous solution even without any pre-treatment. The MoO_3-xnanomaterials are stable against further oxidation even under prolonged atmospheric exposure.In vitroexperiments confirm that they have ideal efficacy for photothermal ablation of human and murine melanoma cancer at relatively lower dose. Duringin vivoPTT treatments, they may be manipulated with a simple external magnetic field for targeted delivery at the malignant tumours. It is demonstrated that commensurate to the neutralization of the malignant cells, the nanomaterials themselves get self-degraded, which should get easily excreted out of the body.

Controlled Differentiation of Human Neural Progenitor Cells on Molybdenum Disulfide/Graphene Oxide Heterojunction Scaffolds by Photostimulation

Ultrathin MoS₂-MoO_3-x heterojunction nanosheets with unique features were introduced as biocompatible, non-cytotoxic, and visible light-sensitive stimulator layers for the controlled differentiation of human neural progenitor cells (hNPCs) into nervous lineages. hNPC differentiation was also investigated on reduced graphene oxide (rGO)-containing scaffolds, that is, rGO and rGO/MoS₂-MoO_3-x nanosheets. In darkness, hNPC differentiation into neurons increased on MoS₂-MoO_3-x by a factor of 2.7 due to the excellent biophysical cues and further increased on rGO/MoS₂-MoO_3-x by a factor of 4.4 due to a synergistic effect induced by the rGO. The MoO_3-x domains with antioxidant activity and LSPR absorption induced p-type doping in MoS₂-MoO_3-x. Under photostimulation, the hNPCs on the MoS₂-MoO_3-x exhibited higher differentiation into glial cells by a factor of 1.4, and the decrease in photo-electron current to hNPCs due to the induction of more p-type doping in the MoS₂-MoO_3-x. While the increase in neuronal differentiation of hNPCs on rGO/MoS₂-MoO_3-x by a factor of 1.8 was ascribed to the presence of rGO as an ultrafast electron transferor which quickly transferred photogenerated electrons to hNPCs before their transfer to free radicals, these results demonstrated the promising potential of MoS₂-based scaffolds for applying in the controllable repair and/or regeneration of diseases/disorders related to the nervous system.

Progress on two-dimensional binary oxide materials

Two-dimensional van der Waals (2D vdW) materials have attracted much attention because of their unique electronic and optical properties. Since the successful isolation of graphene in 2004, many interesting 2D materials have emerged, including elemental olefins (silicene, germanene, etc.), transition metal chalcogenides, transition metal carbides (nitrides), hexagonal boron, etc. On the other hand, 2D binary oxide materials are an important group in the 2D family owing to their high structural diversity, low cost, high stability, and strong adjustability. This review systematically summarizes the research progress on 2D binary oxide materials. We discuss their composition and structure in terms of vdW and non-vdW categories in detail, followed by a discussion of their synthesis methods. In particular, we focus on strategies to tailor the properties of 2D oxides and their emerging applications in different fields. Finally, the challenges and future developments of 2D binary oxides are provided.

Folic acid functionalized molybdenum oxide quantum dots for the detection of Cu2+ ion and alkaline phosphatase via fluorescence turn off-on mechanism

The assay of alkaline phosphatase (ALP) plays a key role in the diagnosis of various diseases. Herein, folic acid functionalized molybdenum oxide quantum dots (FA-MoO_x QDs) are explored as fluorescence "turn- off and on" probes for assaying of Cu²⁺ ion and ALP, respectively. This fluorescence sensing strategy was based on the quenching of emission peak of FA-MoO_x QDs at 445 nm by Cu²⁺ ion, followed by restoring of emission peak selectively with ALP. Based on the quenching and restoring of FA-MoO_x QDs emission intensity, quantitative assay was developed for the detection of Cu²⁺ ion (0.20 - 500 µM) and ALP (0.06 - 150 U/L) with detection limits of 29 nM and 0.026 U/L, respectively. The developed FA-MoO_x QDs-based fluorescence "turn- off and on" strategy exhibited satisfactory results for assaying of ALP in biofluids.

Highly enhanced dye adsorption of MoO3 nanoplates fabricated by hydrothermal-calcination approach in presence of chitosan and thiourea

Water pollution by organic dyes poses great challenge to the environment and living organism. Hence effective removal of organic dyes by cost effective methods have received significant attention in recent years. Herein, we report the complete removal of organic dyes (rhodamine B), methylene blue) and eosin yellow) from water via effective adsorption by MoO₃ catalyst. Hydrothermally synthesised MoO₂ (1) and amorphous MoS_x (2) using ammonium molybdate without and with thiourea exhibited low dye adsorption. In contrast, crystalline micro/nanoplates of MoO₃ (3 and 4) obtained from calcination of 1 and 2 showed highly enhanced dye adsorption. Particularly 4 showed higher dye adsorption compared to 3. UV-Visible absorption studies confirmed complete removal of organic dyes upon stirring with MoO₃ catalyst. Dye removal studies further revealed that cationic dyes are adsorbed faster than anionic dye that could be attributed to the surface charge of MoO₃. Interestingly, the adsorbed dyes were not released from MoO₃ for more than 50 days. The exhausted MoO₃ catalyst can be recovered by annealing at 400 °C. MoO₃ catalyst has also been used as packing materials in dropper column and demonstrated effective removal of dyes by passing through dyes separately as well as mixture.

Visible-Light-Driven Carbon-Doped TiO2-Based Nanocatalysts for Enhanced Activity toward Microbes and Removal of Dye

Solar-driven photocatalytic approach is an attractive, clean, and effective way for decontamination of water. In this work, visible-light-activated TiO₂ nanoflakes (TNFs) and carbon-doped TiO₂ nanoflakes (C-TNFs) were synthesized via a facile hydrothermal route using different carbon sources. The as-synthesized nanostructures were successfully characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM), critically disclosing the anatase nature containing titanium-oxygen having flake/platelet-like morphology with ∼32 nm in size, respectively. The photocatalytic activity was characterized via the degradation of methylene blue (MB) and bacterial inactivation of Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive). The experimental results showed that C-TNFs significantly enhanced photocatalytic activity compared to bare TNFs. It was found that TNF nanocatalysts exhibited superior photocatalytic activity against photodegradation of MB (92.7%) and antibacterial activity (85.6%) under sunlight irradiation. In addition, reduced graphene oxide (RGO)-TNFs have a good recycling ability and are expected to be a promising candidate for photocatalytic applications under sunlight. Consequentially, the higher activity of RGO-TNF nanocatalysts under sunlight irradiation for organic degradation and bacterial inactivation implies that hydrothermal synthesis allows for the preparation of efficient and low-cost carbon-doped photocatalysts for the photodegradation of a wide range of environmental pollutants.

Highly Permeable MoS2 Nanosheet Porous Membrane for Organic Matter Removal

MoS2 nanosheets were synthesized by a bottom-up green chemical process where l-cysteine was used as a sulfur precursor. With specific concentrations, molar ratio of reactants, and pre-mixing conditions, MoS2 nanosheets of 200-300 nm in size and 4.2 nm in average thickness were successfully obtained. Porous membranes were then prepared by depositing the MoS2 nanosheet suspension on a 0.1 μm pore size poly(vinylidene difluoride) membrane filter in a multiple batch procedure. The membrane deposited with 12 batches of MoS2 nanosheets achieved 93.78% removal of bovine serum albumin. Acid red removal of 95.65% was also achieved after the second filtration pass. The porous MoS2 nanosheet membrane also demonstrated a high water flux of 182 ± 2.0 L/(m2 h). This result overcame the trade-off between selectivity and permeability faced by polymeric ultrafiltration membranes. The MoS2 nanosheets as building blocks formed not only intersheet slit pores with a narrow half-width to restrict the passage of organic molecules but also macro-channels allowing easy passage of water. The assembled MoS2 nanosheet membrane delivered promising separation of protein molecules and a high flux, attributing to its porous nanostructure, and could be a potential membrane for various water applications.

Single-Layer MoS2-MoO3-x Heterojunction Nanosheets with Simultaneous Photoluminescence and Co-Photocatalytic Features

Single-layer MoS2-MoO3-x heterojunction nanosheets with visible-light-sensitive band gap energy and average lateral dimensions of ~70 nm were synthesized by using a two-step combined exfoliation method. The exfoliation was initiated from pristine MoS2, while some sulfur sites in expanded MoS2 sheets during exfoliating were substituted by ambient non-thermal oxygen, resulting in formation of α-MoO3-x crystalline domains. The morphological features, crystalline structure, phase formation, number of layers, and optical properties of the MoS2-MoO3-x nanosheets were determined by atomic force microscopy; X-ray diffraction; field emission electron microscopy; transmission electron microscopy; and Raman, UV–visible–NIR, diffuse transmittance, and photoluminescence spectroscopies. The produced α-MoO3-x domains displayed a narrower indirect band gap energy (~1.95 eV) than that of stoichiometric MoO3 (~3 eV), and a broad light absorption range from visible to near-infrared region can act as a plasmonic material facilitating the separation of the photoinduced carriers and enhancing the photocatalytic activity of the MoS2 domain, having ~1.75(2.16) eV indirect (direct) band gap energy. In this regard, the MoS2-MoO3-x heterojunction nanosheets showed single-layer-based excitation-dependent luminescence emissions and visible-light-induced photocatalytic features, at the same time. This study can contribute to promising applications of sheet-like nanomaterials for purposes requiring simultaneous photoluminescence and photocatalytic features, such as in-vivo monitoring and targeting.

Predicting kinetics of water-rich permeate flux through photocatalytic mesh under visible light illumination

Membrane-based separation technologies are attractive to remediating unconventional water sources, including brackish, industrial, and municipal wastewater, due to their versatility and relatively high energy efficiency. However, membrane fouling by dissolved or suspended organic substances remains a primary challenge which can result in an irreversible decline of the permeate flux. To overcome this, membranes have been incorporated with photocatalytic materials that can degrade these organic substances deposited on the surface upon light illumination. While such photocatalytic membranes have demonstrated that they can recover their inherent permeability, less information is known about the effect of photocatalysis on the kinetics of the permeate flux. In this work, a photocatalytic mesh that can selectively permeate water while repelling oil was fabricated by coating a mixture of nitrogen-doped TiO2 (N-TiO2) and perfluorosilane-grafted SiO2 (F-SiO2) nanoparticles on a stainless steel mesh. Utilizing the photocatalytic mesh, the time-dependent evolution of the water-rich permeate flux as a result of photocatalytic degradation of the oil was studied under the visible light illumination. A mathematical model was developed that can relate the photocatalytic degradation of the organic substances deposited on a mesh surface to the evolution of the permeate flux. This model was established by integrating the Langmuir-Hinshelwood kinetics for photocatalysis and the Cassie-Baxter wettability analysis on a chemically heterogeneous mesh surface into a permeate flux relation. Consequently, the time-dependent water-rich permeate flux values are compared with those predicted by using the model. It is found that the model can predict the evolution of the water-rich permeate flux with a goodness of fit of 0.92.

Synthesis, characterization, and visible light photocatalytic activity of solution-processed free-standing 2D Bi2O2Se nanosheets

Owing to their unique structural and electronic properties such as layered structure with tuneable bandgap and high electron mobility, 2D materials have emerged as promising candidates for photocatalysis. Recently, bismuth oxyselenide (Bi₂O₂Se), a member of bismuth oxychalcogenide's family has shown great potential in high-speed field-effect transistors, infrared photodetectors, ferroelectric devices, and electrochemical sensors. However, the potential of Bi₂O₂Se in photocatalysis has not yet been explored. In the current work, Bi₂O₂Se nanosheets with an average size of ∼170 nm and a lattice strain of 0.01 were synthesized at room temperature using a facile solution-processed method and the as-synthesized material was investigated with various characterization techniques such as x-ray diffraction, FE-SEM, UV-vis spectroscopy. The bandgap for the indirect transition in Bi₂O₂Se nanosheets was estimated to be 1.19 eV. Further, the visible-light-driven photocatalytic degradation of methylene blue (MB) dye using Bi₂O₂Se as a photocatalyst is presented. The photocatalytic experiments demonstrate the promising photocatalytic ability of Bi₂O₂Se as it leads to 25.06% degradation of MB within 80 min of light illumination. The effect of active species trapping agents (carrier and radical scavengers) on photocatalytic activity is also presented and discussed.

Self-Powered Rewritable Electrochromic Display based on WO3-x Film with Mechanochemically Synthesized MoO3-y Nanosheets

Electrochromic displays with bistable color states provide a promising means toward transparent human-machine interfaces. However, the need for external power and the weak optical modulation in the visible light region of most electrochromic devices hinder their practical applications in displays. Here we prepare the MoO_3-y/WO_3-x films based on MoO_3-y nanosheets, which show a dark blue color that matches the response of the eye and meets visual comfort standards compared to pure WO_3-x film. By introducing the highly transparent Al³⁺ ion hydrogel layer, a convenient electrochromic device driven by the internal chemical potential has been designed. The device based on the MoO_3-y /WO_3-x film exhibits a high optical modulation in the whole visible light range and can operate at self-powered mode with fast response speed and excellent cycle stability. Moreover, we develop an ionic writing board based on the MoO_3-y/WO_3-x film to surmount the fixed display information issue in conventional electrochromic displays. The ionic writing board exhibits excellent visual display quality and realizes arbitrary writing with a self-powered characteristic. This work provides a simple mechanochemical synthesis procedure of MoO_3-y nanosheets and an ingenious design of self-powered electrochromic devices, which will enable the development of next-generation high-performance electrochromic displays.

All-cellulose functional membranes for water treatment: Adsorption of metal ions and catalytic decolorization of dyes

In this study, we present a facile, one-step method for the manufacturing of all-cellulose, layered membranes containing cellulose nanocrystals (CNC), TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibers (TO-CNF), or zwitterionic polymer grafted cellulose nanocrystals (CNC-g-PCysMA) as functional entities in combination with cellulose fibers and commercial grade microfibrillated cellulose. The presence of active sites such as hydroxyl, carbonyl, thioethers, and amines, gave the membranes high adsorption capacities for the metal ions Au (III), Co (II), and Fe (III), as well as the cationic organic dye methylene blue (MB). Furthermore, the membranes served as excellent metal-free catalysts for the decolorization of dyes via hydrogenation. A 3-fold increase of the hydrogenation efficiency for cationic dyes such as rhodamine B (RhB) and methylene blue was obtained in the presence of membranes compared to NaBH₄ alone. Water-based processing, the abundance of the component materials, and the multifunctional characteristics of the membranes ensure their potential as excellent candidates for water purification systems.

Nanobiotechnology as a platform for the diagnosis of COVID-19: a review

A sensitive method for diagnosing coronavirus disease 2019 (COVID-19) is highly required to fight the current and future global health threats due to severe acute respiratory syndrome coronavirus 2 (SARS-CoV 2). However, most of the current methods exhibited high false‐negative rates, resulting in patient misdiagnosis and impeding early treatment. Nanoparticles show promising performance and great potential to serve as a platform for diagnosing viral infection in a short time and with high sensitivity. This review highlighted the potential of nanoparticles as platforms for the diagnosis of COVID-19. Nanoparticles such as gold nanoparticles, magnetic nanoparticles, and graphene (G) were applied to detect SARS-CoV 2. They have been used for molecular-based diagnosis methods and serological methods. Nanoparticles improved specificity and shorten the time required for the diagnosis. They may be implemented into small devices that facilitate the self-diagnosis at home or in places such as airports and shops. Nanoparticles-based methods can be used for the analysis of virus-contaminated samples from a patient, surface, and air. The advantages and challenges were discussed to introduce useful information for designing a sensitive, fast, and low-cost diagnostic method. This review aims to present a helpful survey for the lesson learned from handling this outbreak to prepare ourself for future  pandemic.

Highly Efficient Methylene Blue Dye Removal by Nickel Molybdate Nanosorbent

Removing methylene blue (MB) dye from aqueous solutions was examined by the use of nickel molybdate (α-NiMoO₄) as an adsorbent produced by an uncomplicated, rapid, and cost-effective method. Different results were produced by varying different parameters such as the pH, the adsorbent dose, the temperature, the contact time, and the initial dye concentration. Adsorbent dose and pH had a major removal effect on MB. Interestingly, a lower amount of adsorbent dose caused greater MB removal. The amount of removal gained was efficient and reached a 99% level with an initial methylene blue solution concentration of ≤160 ppm at pH 11. The kinetic studies indicated that the pseudo-second-order kinetic model relates very well with that of the obtained experimental results. The thermodynamic studies showed that removing the MB dye was favorable, spontaneous, and endothermic. Impressively, the highest quantity of removal amount of MB dye was 16,863 mg/g, as shown by the Langmuir model. The thermal regeneration tests revealed that the efficiency of removing MB (11,608 mg/g) was retained following three continuous rounds of recycled adsorbents. Adsorption of MB onto α-NiMoO₄ nanoparticles and its regeneration were confirmed by Fourier transform infrared spectroscopy (FTIR) analysis and scanning electron microscopy (SEM) analysis. The results indicated that α-NiMoO₄ nanosorbent is an outstanding and strong candidate that can be used for removing the maximum capacity of MB dye in wastewater.

PANI/MoO3−x shell–core composites with enhanced rate and cycling performance for flexible solid-state supercapacitors and electrochromic applications

PANI/MoO_3−x shell–core composites show enhanced electrochemical and electrochromic performance as a bi-functional electrode material for flexible solid-state supercapacitors, attributed to a synergistic effect from PANI nanorods and MoO_3−x nanobelts.

A benevolent direction to environmental suitability: ionic liquid immobilized MoO3 nanoparticles used in the efficient visible light-driven photocatalytic degradation of antibiotics

This paper summarizes the synthesis of a novel MoO₃-bonded imidazolium sulfonic acid chloride (MoO₃-IL) using a facile precipitation method and its application in the degradation of two organic pollutants.

Iron Molybdate Fe2(MoO4)3 Nanoparticles: Efficient Sorbent for Methylene Blue Dye Removal from Aqueous Solutions

The present study investigated iron molybdate (Fe₂(MoO₄)₃), synthesized via a simple method, as a nanosorbent for methylene blue (MB) dye removal from aqueous solutions. Investigations of the effects of several parameters like contact time, adsorbent dose, initial dye concentration, temperature and pH were carried out. The results showed that MB removal was affected, significantly, by adsorbent dose and pH. Interestingly, lower values of adsorbent dose resulted in the removal of higher amounts of MB. At the optimum pH, the removal efficiency of 99% was gained with an initial MB concentration of ≤60 ppm. The kinetic study specified an excellent correlation of the experimental results with the pseudo-second-order kinetics model. Thermodynamic studies proved a spontaneous, favorable and endothermic removal. The maximum amount of removal capacity of MB dye was 6173 mg/g, which was determined from the Langmuir model. The removal efficiency was shown to be retained after three cycles of reuse, as proven by thermal regeneration tests. The presence and adsorption of the dye onto the Fe₂(MoO₄)₃ nanoparticle surface, as well as the regeneration of the latter, was ascertained by scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). These findings are indicative that the investigated nanosorbent is an excellent candidate for the removal of MB in wastewater.

Thermally Sensitized Membranes for Crude Oil-Water Remediation under Visible Light

Effective remediation of produced water requires separating crude oil-water mixture and removing the dissolved organic pollutants. Membranes with selective wettability for water over oil enable the gravity-driven separation of an oil-water mixture by allowing water to permeate through while repelling oil. However, these membranes are often limited by their inability to remove the dissolved organic pollutants. In this work, a membrane with in-air superhydrophilic and underwater superoleophobic wettability is fabricated by thermal annealing of a stainless steel mesh. The resulting membrane possesses a hierarchical surface texture covered with a photocatalytic oxide layer composed of iron oxide and chromium oxide. The membrane exhibits chemical and mechanical robustness, which makes it suitable for remediation of crude oil and water mixture. Further, after being fouled by crude oil, the membrane can recover its inherent water-rich permeate flux upon visible light irradiation. Finally, the membrane demonstrates that it can separate surfactant-stabilized crude oil-in-water emulsion under gravity and decontaminate water-rich permeate by photocatalytic degradation of dissolved organic pollutants upon continuous irradiation of visible light.

Bacterial Nanocellulose/MoS2 Hybrid Aerogels as Bifunctional Adsorbent/Photocatalyst Membranes for in-Flow Water Decontamination

To address the problems associated with the use of unsupported nanomaterials, in general, and molybdenum disulfide (MoS₂), in particular, we report the preparation of self-supported hybrid aerogel membranes that combine the mechanical stability and excellent textural properties of bacterial nanocellulose (BC)-based organic macro/mesoporous scaffolds with the excellent adsorption-cum-photocatalytic properties and high contaminant removal performance of MoS₂ nanostructures. A controlled hydrothermal growth and precise tuning of the synthetic parameters allowed us to obtain BC/MoS₂-based porous, self-supported, and stable hybrid aerogels with a unique morphology resulting from a molecular precision in the coating of quantum-confined photocatalytic MoS₂ nanostructures (2-4 nm crystallite size) on BC nanofibrils. These BC/MoS₂ samples exhibit high surface area (97-137 m²·g^-1) and pore volume (0.28-0.36 cm³·g^-1) and controlled interlayer distances (0.62-1.05 nm) in the MoS₂ nanostructures. Modification of BC with nanostructured MoS₂ led to an enhanced pollutants removal efficiency of the hybrid aerogels both by adsorptive and photocatalytic mechanisms, as indicated by a detailed study using a specifically designed membrane photoreactor containing the developed photoactive/adsorptive BC/MoS₂ hybrid membranes. Most importantly, the prepared BC/MoS₂ aerogel membranes showed high performance in the photoassisted in-flow removal of both organic dye (methylene blue (MB)) molecules (96% removal within 120 min, K_obs = 0.0267 min^-1) and heavy metal ions (88% Cr(VI) removal within 120 min, K_obs = 0.0012 min^-1), separately and/or simultaneously, under UV-visible light illumination as well as excellent recyclability and photostability. Samples with interlayer expanded MoS₂ nanostructures were particularly more efficient in the removal of smaller species (CrO₄^2-) as compared to larger (MB) dye molecules. The prepared hybrid aerogel membranes show promising behavior for application in in-flow water purification, representing a significant advancement in the use of self-supported aerogel membranes for photocatalytic applications in liquid media.

Two-dimensional β-MoO3@C nanosheets as high-performance negative materials for supercapacitors with excellent cycling stability

MoO₃ has gained a great deal of attention as a promising electrode material in energy storage devices. In particular, the low dimensional MoO₃ nanosheets coated with carbon layers are desirable electrode materials in supercapacitors. However, the fabrication or construction of β-MoO₃ with a special morphology is difficult. Here, we report a simple solvothermal treatment method to synthesize two-dimensional β-MoO₃@C (2D β-MoO₃@C) nanosheets. When used as electrode materials for supercapacitors, the as-prepared material displays an ultra-long lifespan with a 94% retention ratio after 50 000 cycles at 2 A g^-1. The excellent cycling stability is mainly attributed to the unique 2D nanosheet structure and the presence of the carbon layer on the surface of the nanosheet. Specifically, the presence of the carbon layer increases the electric conductivity of MoO₃, which facilitates a good access point for electrolyte ions and short ion diffusion paths. In addition, MoO₃ that has been coated with a carbon layer can maintain a good structural stability due to the carbon layer restricting the volume expansion of MoO₃ during the charge procedure. We believe that the present work opens a new way for designing the 2D layered materials with unique architectures for supercapacitor applications.

An Easy and Ecological Method of Obtaining Hydrated and Non-Crystalline WO3-x for Application in Supercapacitors

In this work, we report the synthesis of hydrated and non-crystalline WO₃ flakes (WO_3−x) via an environmentally friendly and facile water-based strategy. This method is described, in the literature, as exfoliation, however, based on the results obtained, we cannot say unequivocally that we have obtained an exfoliated material. Nevertheless, the proposed modification procedure clearly affects the morphology of WO₃ and leads to loss of crystallinity of the material. TEM techniques confirmed that the process leads to the formation of WO₃ flakes of a few nanometers in thickness. X-ray diffractograms affirmed the poor crystallinity of the flakes, while spectroscopic methods showed that the materials after exfoliation were abundant with the surface groups. The thin film of hydrated and non-crystalline WO₃ exhibits a seven times higher specific capacitance (C_s) in an aqueous electrolyte than bulk WO₃ and shows an outstanding long-term cycling stability with a capacitance retention of 92% after 1000 chronopotentiometric cycles in the three-electrode system. In the two-electrode system, hydrated WO_3−x shows a C_s of 122 F g⁻¹ at a current density of 0.5 A g⁻¹. The developed supercapacitor shows an energy density of 60 Whkg⁻¹ and power density of 803 Wkg⁻¹ with a decrease of 16% in C_sp after 10,000 cycles. On the other hand, WO_3−x is characterized by inferior properties as an anode material in lithium-ion batteries compared to bulk WO₃. Lithium ions intercalate into a WO₃ crystal framework and occupy trigonal cavity sites during the electrochemical polarization. If there is no regular layer structure, as in the case of the hydrated and non-crystalline WO₃, the insertion of lithium ions between WO₃ layers is not possible. Thus, in the case of a non-aqueous electrolyte, the specific capacity of the hydrated and non-crystalline WO₃ electrode material is much lower in comparison with the specific capacity of the bulk WO₃-based anode material.

Nanostructured MoO3 for Efficient Energy and Environmental Catalysis

This paper mainly focuses on the application of nanostructured MoO₃ materials in both energy and environmental catalysis fields. MoO₃ has wide tunability in bandgap, a unique semiconducting structure, and multiple valence states. Due to the natural advantage, it can be used as a high-activity metal oxide catalyst, can serve as an excellent support material, and provide opportunities to replace noble metal catalysts, thus having broad application prospects in catalysis. Herein, we comprehensively summarize the crystal structure and properties of nanostructured MoO₃ and highlight the recent significant research advancements in energy and environmental catalysis. Several current challenges and perspective research directions based on nanostructured MoO₃ are also discussed.

Flexible Freestanding MoO3-x -Carbon Nanotubes-Nanocellulose Paper Electrodes for Charge-Storage Applications

Herein, a one-step synthesis protocol was developed for synthesizing freestanding/flexible paper electrodes composed of nanostructured molybdenum oxide (MoO_3-x ) embedded in a carbon nanotube (CNT) and Cladophora cellulose (CC) matrix. The preparation method involved sonication of the precursors, nanostructured MoO_3-x , CNTs, and CC with weight ratios of 7:2:1, in a water/ethanol mixture, followed by vacuum filtration. The electrodes were straightforward to handle and possessed a thickness of approximately 12 μm and a mass loading of MoO_3-x -CNTs of approximately 0.9 mg cm^-2 . The elemental mapping showed that the nanostructured MoO_3-x was uniformly embedded inside the CNTs-CC matrix. The MoO_3-x -CNTs-CC paper electrodes featured a capacity of 30 C g^-1 , normalized to the mass of MoO_3-x -CNTs, at a current density of 78 A g^-1 (corresponding to a rate of approximately 210 C based on the MoO₃ content, assuming a theoretical capacity of 1339 C g^-1 ), and exhibited a capacity retention of 91 % over 30 000 cycles. This study paves the way for the manufacturing of flexible/freestanding nanostructured MoO_3-x -based electrodes for use in charge-storage devices at high charge/discharge rates.

Fabrication and characterization of a high performance polyimide ultrafiltration membrane for dye removal

Membrane separation technology is one of the cost effective and most efficient technologies for treatment of wastewater from textile industry. However, development of membranes with better performance and thermal stability is still a highly challenging task. In this study, successful preparation of a novel thermally stable polyimide (PI) polymer was demonstrated using 2,4,6-trimethyl-1,3-phenylenediamine, 4,4'-diaminodiphenylmethane and 1,2,4,5-benzenetetracarboxylic dianhydride components. PI was selected as representative candidate because of its excellent thermal stability (decomposition temperature of 529 °C), as revealed by thermogravimetric analysis. Furthermore, PI polymer was used to fabricate ultrafiltration (UF) membrane by phase inversion process. This UF membrane is especially interesting as it allowed for almost complete penetration of monovalent (NaCl) and divalent (Na₂SO₄) inorganic salts because of its molecular weight cut off of 9320 Da. Moreover, the membrane exhibited very good surface hydrophilicity with the water contact angle of 67.6°. This PI-based UF membrane was found to be substantially effective as it showed high pure-water and dye-permeation fluxes of 345.10 and 305.58 L m^-2 h^-1 at 0.1 MPa, respectively. Besides, the membrane exhibited a rejection of 98.65% toward the direct red 23 dye (100 ppm) at 0.1 MPa. Thus, this PI-based UF membrane is highly beneficial and acts as a potential candidate for dye removal from wastewater produced by textile industry.

Degradation of tricyclic polyaromatic hydrocarbons in water, soil and river sediment with a novel TiO2 based heterogeneous nanocomposite

Polycyclic aromatic hydrocarbons (PAHs), pervasive and precedence pollutants have potential to decimate the bionetwork and human health. Therefore, photocatalytic degradation of toxic three membered PAHs, namely acenaphthene (ACN), phenanthrene (PHN) and fluorene (FLU) was explored in water and soil. Titanium dioxide based zinc hexacyanoferrate framework (TiO₂@ZnHCF) nanocomposite was synthesized via a two step A. indica mediated co-precipitation method. Under sunlight, fall in concentration of PAHs (Water- 93%-96%, soil- 82%-86% and river sediment- 81.63%-85.43%) with time revealed superior activity of nanocomposite (TiO₂@ZnHCF) as compared to the bared one. Slower degradation in soil and sediment could be attributed to the reduced diffusion caused by the interaction between the organic content of soil/sediment with PAHs. Doping caused an increase in surface area (118.15 m²g^-1) with decrease in band gap energy (1.65 eV) and photoluminescence intensity. PAHs removal (X_m = 9.48 mg g^-1 of ACN, 9.35 mg g^-1 of PHN and 8.96 mg g^-1 of FLU) involved role of "cation- π" interaction with nanocomposite. Besides, it reduced t_1/2 values of ACN (1.88 h), PHN (2.09 h) and FLU (2.86 h) and resulted into smaller by-products. Smaller by-products like (Z)-prop-1-ene-1,2,3-triol (m/z = 91) and (E)-3-hydroxyacrylaldehyde (m/z = 71) identified in GC-MS, evidently braced e^- excitement from encapsulated nanocatalyst followed by OH (active species) based oxidation of PAHs. Lower photoluminescence intensity indicates the least charge carrier recombination with highest photocatalytic activity of nanocomposites. Inclusive of the present study provides promising photocatalyst with greater surface activity, low quantum yield with charge separation, reusable up to ten cycles deprived of substantial loss of its action and suppressing the cost of process.

Amorphous MoO3-x nanosheets prepared by the reduction of crystalline MoO3 by Mo metal for LSPR and photothermal conversion

Amorphous MoO3-x with enhanced LSPR has been fabricated successfully by introducing Mo atoms into the interlayers of MoO3 nanosheets via a hydrothermal method. The inserted Mo atom could bond with inherent Mo atoms and further form a distorted atomic configuration structure. Thus, the amorphous MoO3-x possesses a relatively excellent photothermal conversion efficiency of 61.79%.

Enhanced photocatalytic properties of defect-rich α-MoO3 nanoflakes by cavitation and pitting effect

For the first time, we present a novel, facile and eco-friendly engineering defect method, to produce defect-rich α-MoO₃ (dr-MoO₃) nanoflakes with abundant exposed reactive edge sites, by applying cavitation and pitting effect of high-power ultrasonic tip to inch-size α-MoO₃ single crystals. The as-prepared dr-MoO₃ nanoflakes deliver excellent photocatalytic activity for degradation of Rhodamine B (RhB) under visible light irradiation. The degradation apparent rate constant k of dr-MoO₃ is as large as 5.9 × 10^-2 min^-1, which is ˜6.6 times higher than commercial α-MoO₃ (com-MoO₃). The superior photocatalytic performance of dr-MoO₃ is attributed to its rich exposed edges and slight expansion of interlayer space, which not only enhance the adsorption of H₂O and OH^-, provide abundant highly reactive sites, but also shorten the distance of photogenerated carriers moving to the reactive sites. This work provides new insights into the self-enhancement of α-MoO₃ photocatalytic activities, which could be extended to other layered semiconductor photocatalysts.

Challenges and recent advancements of functionalization of two-dimensional nanostructured molybdenum trioxide and dichalcogenides

Atomically thin two-dimensional (2D) semiconductors are the thinnest functional semiconducting materials available today. Among them, both molybdenum trioxide and chalcogenides (MT&Ds) represent key components within the family of different 2D semiconductors for various electronic, optoelectronic and electrochemical applications due to their unique electronic, optical, mechanical and electrochemical properties. However, despite great progress in research dedicated to the development and fabrication of 2D MT&Ds observed within the last decade, there are significant challenges that affected their charge transport behavior and fabrication on a large scale as well as there is high dependence of the carrier mobility on the thickness. In this article, we review the recent progress in the carrier mobility engineering of 2D MT&Ds and elaborate devised strategies dedicated to the optimization of MT&D properties. Specifically, the latest physical and chemical methods towards the surface functionalization and optimization of the major factors influencing the extrinsic transport at the electrode-2D semiconductor interface are discussed.