Ultrasmall Plasmonic Nanoparticles Decorated Hierarchical Mesoporous TiO2 as an Efficient Photocatalyst for Photocatalytic Degradation of Textile Dyes

Plasmonic effect of metal nanoparticles on the photocatalytic properties of TiO2/rGO composite

A comparative study of the plasmon effect of Ag and Au nanoparticles on TiO2/rGO nanocomposite was carried out. The synthesis of Au and Ag nanoparticles was carried out by laser ablation. The morphology and structure of the nanocomposites were studied by EDA, HRTEM, XRD and Raman spectroscopy. It was shown that the absorption capacity of the nanocomposite material was increased in the visible range of the spectrum when Ag and Au nanoparticles were added to TiO2/rGO. This leads to an increase in their photocatalytic activity. The photocurrent generated by NC/Au 10-11films is in 3.8 times and NC/Ag 10-12is in 2 times higher compared to pure TiO2/rGO film. Similar results were obtained from experimental data on the dyes photodegradation. In the presence of plasmon nanoparticles a significant enhancement in the electrical properties of the TiO2/rGO nanocomposite was recorded. The charge carrier transfer resistance in nanocomposites was decreased by almost ∼7 times for NC/Au,10-11and ∼4 times for NC/Ag,10-12films compared to pure TiO2/rGO. In addition, for nanocomposites with Ag or Au nanoparticles, a decrease in the effective electron lifetime was observed. The data obtained allow us to conclude that plasmonic NPs have a synergistic effect in TiO2/rGO nanocomposites, which consists in modifying both their light-harvesting properties and charge-transport characteristics. The results obtained can be used for the design of materials with improved photocatalytic and optoelectronic characteristics.

A review on transition metal oxides based photocatalysts for degradation of synthetic organic pollutants

This review provides insight into the current research trend in transition metal oxides (TMOs)-based photocatalysis in removing the organic colouring matters from water. For easy understanding, the research progress has been presented in four generations according to the catalyst composition and mode of application, viz: single component TMOs (the first-generation), doped TMOs/binary TMOs/doped binary TMOs (the second-generation), inactive/active support-immobilized TMOs (the third-generation), and ternary/quaternary compositions (the fourth-generation). The first two generations represent suspended catalysts, the third generation is supported catalysts, and the fourth generation can be suspended or supported. The review provides an elaborated comparison between suspended and supported catalysts, their general/specific requirements, key factors controlling degradation, and the methodologies for performance evaluation. All the plausible fundamental and advanced dye degradation mechanisms involved in each generation of catalysts were demonstrated. The existing challenges in TMOs-based photocatalysis and how the researchers approach the hitch to resolve it effectively are discussed. Future research trends are also presented.

Development of Co3O4/TiO2/rGO photocatalyst for efficient degradation of pharmaceutical pollutants with effective charge carrier recombination suppression

Pharmaceutical contaminations in the water resources becomes very serious global environmental issue. Therefore, these pharmaceutical molecules should be removed from the water resources. In the current work, 3D/3D/2D-Co3O4/TiO2/rGO nanostructures were synthesized through a facile self-assembly-assisted solvothermal method for an effective removal of pharmaceutical contaminations. The nanocomposite was finely optimized through the response surface methodology (RSM) technique with different initial reaction parameters and different molar ratios. Various characterization techniques were used to understand the physical and chemical properties of 3D/3D/2D heterojunction and its photocatalytic performance. The degradation performance of ternary nanostructure was rapidly increased owing formation of 3D/3D/2D heterojunction nanochannels. The 2D-rGO nanosheets play an essential role in trapping photoexcited charge carriers to reduce the recombination process rapidly as confirmed by photoluminescence analysis. Tetracycline and ibuprofen were used as model carcinogen molecules to examine the degradation efficiency of Co3O4/TiO2/rGO under visible light irradiation using halogen lamp. The intermediates produced during the degradation process were studied using LC-TOF/MS analysis. The pharmaceutical molecules tetracycline and ibuprofen follows pseudo first order kinetics model. The photodegradation results show that the 6:4 M ratio of Co3O4:TiO2 with 5% rGO exhibits 12.4 times and 12.3 higher degradation ability than pristine Co3O4 nanostructures against tetracycline and ibuprofen, respectively. These results shows high efficiency of Co3O4/TiO2/rGO composite against the degradation of tetracycline and ibuprofen.

Cu-doped mesoporous TiO2 photocatalyst for efficient degradation of organic dye via visible light photocatalysis

A solvothermal method was used to synthesize the mesoporous TiO2, (1-3w %) Cu-doped mesoporous TiO2 membrane with the help of a bioreactor. To understand the physicochemical composition of all synthesized nanomaterials, the structure, morphology and crystallinity of the materials were studied using X-ray diffractometer (XRD), Field emission scanning electron microscopy (FESEM), Fourier transform-infrared (FTIR), Energy dispersive X-ray spectroscopy (EDS) and cyclic voltammetry (CV). Under artificial light source (500 W mercury bulb) irradiations, the nano catalysts' catalytic effectiveness was examined for the azo dyes, namely Congo red. Cu-doping causes a shift in the light absorption of mTiO2 from the ultraviolet to the visible region. The 3w% Cu-doped mTiO2 photocatalyst exhibits lower band gap energy (2.6eV) than TiO2 which is 3.2 eV to efficiently utilize solar energy. As a result, the light absorption was shifted towards the visible spectrum. The recommended mTiO2 and (1, 2, 3) w% Cu-doped mTiO2 photocatalysts were used to photodegrade Congo red and methylene blue. For the degradation of CR, the mTiO2 photocatalyst exhibited 61% and 3w% Cu-doped mTiO2 demonstrated 99% photocatalytic performance after 50 min. A variety of scavengers were also utilized to distinguish the active species by catching the radicals and holes created during the process of photocatalytic degradation. CV indicates the presence of Cu2+ and Cu1+ in Cu-doped mTiO2. Oxygen vacancies and the electronegative surface of Cu1+ seem to perform the photocatalytic reduction of CR.

Synergistic Photoelectrochemical and Photocatalytic Properties of the Cobalt Nanoparticles-Embedded TiVO4 Thin Film

To optimize the semiconductor properties of TiVO4 thin films and enhance their performance, we incorporated cobalt nanoparticles as an effective co-catalyst consisting of a non-noble metal. Through an investigation into the impact of cobalt loading on spray pyrolyzed TiVO4 thin films, we observed a significant enhancement in the photoelectrochemical (PEC) performance. This was accomplished by carefully optimizing the concentrations of Co2+ (3 mM) to fabricate a composite electrode, resulting in a higher photocurrent density for the TiVO4:Co photoanode. When an applied potential of 1.23 V (vs RHE) was used, the photocurrent density reached 450 μA/cm2, approximately 5 times higher than that of bare TiVO4. We conducted a thorough characterization of the composite structure and optical properties. Additionally, electrochemical impedance spectroscopy analysis indicated that the TiVO4/Co thin film exhibited a smaller semicircle, indicating a significant improvement in charge transfer at the interface. In comparison to bare TiVO4, the TiVO4/Co composite exhibited a notable improvement in photocatalytic activity when degrading methylene blue (MB) dye, a widely employed model dye. Under light illumination, a TiVO4/Co thin film exhibited a notable dye degradation rate of 97% within a 45 min duration. The scalability of our fabrication method makes it suitable for large-area devices intended for sunlight-driven PEC seawater splitting studies.

Melamine-Formaldehyde Polymer-Based Nanocomposite for Sunlight-Driven Photodegradation of Multiple Dyes and Their Mixture

Cadmium sulfide (CdS)-decorated, cross-linked melamine-formaldehyde polymer-based nanocomposite (MFP-CdS) has been synthesized. MFP-CdS is utilized here as a photoactive material for the photodegradation of six model organic dyes and their mixture in an aqueous medium in the presence of sunlight. The half-life values from the kinetic study of multiple dyes strongly support the importance of sunlight on the fast degradation of all six dyes compared to bulb light and control (dark) conditions. A comparative ¹H NMR analysis of the dyes and their degraded products has been performed to support the breakdown of the aromatic framework of organic dyes using MFP-CdS in sunlight. The mechanisms involved in the photodegradation of dyes have been investigated based on radical trapping studies that support the significant involvement of superoxide radicals along with holes. Moreover, the dye removal efficiency using MFP-CdS from real industrial wastewater samples is evaluated via the external spiking of organic dyes and their mixture in unknown industrial effluents where they showed similar photodegradation results. Based on the high recyclability of MFP-CdS, these are used for multiple cycles.

A review on degradation of organic dyes by using metal oxide semiconductors

The discharge of organic dye pollutants in natural water bodies has put forward a big challenge of providing clean water to a large part of the population. As the population is increasing with time, only underground water is not sufficient to complete the water requirements of everyone everywhere. Purification of wastewater and its reuse is the only way to fulfill the water needs. Nanotechnology has been used very efficiently for wastewater treatment via photocatalytic degradation of dye molecules. In the past few years, a lot of investigations have been done to enhance the photocatalytic activity of metal oxide semiconductors for water purification. In this review, we have discussed the different methods of synthesis of various metal oxide semiconductor nanoparticles, energy band gap, their role as efficient photocatalysts, radiations used for photocatalytic reactions, and their degradation efficiency to degrade the dye pollutants. We have also discussed the nanocomposites of metal oxide with graphene. These nanocomposites have been utilized as the efficient photocatalyst due to unique characteristics of graphene such as extended range of light absorption, separation of charges, and high capacity of adsorption of the dye pollutants.

One-Step Hydrothermal Synthesis of Cu2ZnSnS4 Nanoparticles as an Efficient Visible Light Photocatalyst for the Degradation of Congo Red Azo Dye

A hydrothermal method was successfully employed to synthesize kesterite Cu₂ZnSnS₄ (CZTS) nanoparticles. X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and optical ultraviolet-visible (UV-vis) spectroscopy were used for characterization of structural, chemical, morphological, and optical properties. XRD results confirmed that a nanocrystalline CZTS phase corresponding to the kesterite structure was formed. Raman analysis confirmed the existence of single pure phase CZTS. XPS results revealed the oxidation states as Cu⁺, Zn²⁺, Sn⁴⁺, and S^2-. FESEM and TEM micrograph images revealed the presence of nanoparticles with average sizes between 7 nm to 60 nm. The synthesized CZTS nanoparticles bandgap was found to be 1.5 eV which is optimal for solar photocatalytic degradation applications. The properties as a semiconductor material were evaluated through the Mott-Schottky analysis. The photocatalytic activity of CZTS has been investigated through photodegradation of Congo red azo dye solution under solar simulation light irradiation, proving to be an excellent photo-catalyst for CR where 90.2% degradation could be achieved in just 60 min. Furthermore, the prepared CZTS was reusable and can be repeatedly used to remove Congo red dye from aqueous solutions.

Enhanced Plasmonic Photocatalysis of Au-Decorated ZnO Nanocomposites

The rapid development of technological processes in various industrial fields has led to surface water pollution with different organic pollutants, such as dyes, pesticides, and antibiotics. In this context, it is necessary to find modern, environmentally friendly solutions to avoid the hazardous effects on the aquatic environment. The aim of this paper is to improve the photocatalytic performance of zinc oxide (ZnO) nanoparticles by using the plasmonic resonance induced by covering them with gold (Au) nanoparticles. Therefore, we evaluate the charge carriers’ behavior in terms of optical properties and reactive oxygen species (ROS) generation. The ZnO-Au nanocomposites were synthesized through a simple chemical protocol in multiple steps. ZnO nanoparticles (NPs) approximately 20 nm in diameter were prepared by chemical precipitation. ZnO-Au nanocomposites were obtained by decorating the ZnO NPs with Au at different molar ratios through a reduction process. X-ray diffraction (XRD) analysis and transmission electron microscopy (TEM) confirmed the simultaneous presence of hexagonal ZnO and cubic Au phases. The optical investigations evidenced the existence of a band-gap absorption peak of ZnO at 372 nm, as well as a surface plasmonic band of Au nanoparticles at 573 nm. The photocatalytic tests indicated increased photocatalytic degradation of the Rhodamine B (RhB) and oxytetracycline (OTC) pollutants under visible light irradiation in the presence of ZnO-Au nanocomposites (60–85%) compared to ZnO NPs (43%). This behavior can be assigned to the plasmonic resonance and the synergetic effects of the individual constituents in the composite nanostructures. The spin-trapping experiments showed the production of ROS while the nanostructures were in contact with the pollutants. This study introduces new strategies to adjust the efficiency of photocatalytic devices by the combination of two types of nanostructures with synergistic functionalities into one single entity. ZnO-Au nanocomposites can be used as stable photocatalysts with excellent reusability and possible industrial applications.

Silver nanoparticles modified ZnO nanocatalysts for effective degradation of ceftiofur sodium under UV-vis light illumination

Light-induced photocatalytic degradation of ceftiofur sodium (CFS) has been assessed in the presence of plasmonic zinc oxide nanostructures (ZnONSTs), like, ZnO nanoparticles, ZnO nanorods (ZnONRs) and ZnO nanoflowers (ZnONFs). Silver nanoparticles (Ag NPs) loaded ZnO nanostructures (Ag-ZnONSTs) are obtained through seed-assisted chemical reaction followed by chemical reduction of silver. The surface modification of ZnO nanostructures by Ag NPs effectually altered their optical properties. Further, the surface plasmonic effect of Ag NPs facilitates visible light absorption by ZnONSTs and improved the photogenerated electron and hole separation, which makes the ZnONSTs a more active photocatalyst than TiO₂ (P25) nanoparticles. Especially, Ag-ZnONRs showed higher CFS oxidation rate constant (k' = 4.6 × 10^-4 s^-1) when compared to Ag-ZnONFs (k' = 2.8 × 10^-4 s^-1) and Ag-ZnONPs (k' = 2.5 × 10^-4 s^-1), owing to their high aspect ratio (60:1). The unidirectional transport of photogenerated charge carriers on the Ag-ZnONRs may be accountable for the observed high photocatalytic oxidation of CFS. The photocatalytic oxidation of CFS mainly proceeds through ^•OH radicals generated on the Ag-ZnONRs surface under light illumination. In addition, heterogeneous activation of peroxymonosulfate by Ag-ZnONRs accelerates the rate of photocatalytic mineralization of CFS. The quantification of oxidative radicals supports the proposed CFS oxidation mechanism. Stability studies of plasmonic Ag-ZnONSTs strongly suggests that it could be useful to clean large volume of pharmaceutical wastewater under direct solar light irradiation.

Tailoring Structure: Current Design Strategies and Emerging Trends to Hierarchical Catalysts

Nature mimicking implies the design of nanostructured materials, which can be assembled into a hierarchical structure, thus outperforming the features of the neat components because of their multiple length scale organization. This approach can be effectively exploited for the design of advanced photocatalysts with superior catalytic activity for energy and environment applications with considerable development in the recent six years. In this context, we propose a review on the state of the art for hierarchical photocatalyst production. Particularly, different synthesis strategies are presented, including template-free structuring, and organic, inorganic, and hybrid templating. Furthermore, emerging approaches based on hybrid and bio-waste templating are also highlighted. Finally, a critical comparison among available methods is carried out based on the envisaged application.

Nano-Ag: Environmental applications and perspectives

Silver nanoparticles (AgNPs) are promising bactericidal agents and plasmonic NPs for environmental applications, owing to their various favorable properties. For example, AgNPs enables reactive oxygen species (ROS) generation, surface plasmon resonance (SPR), and specific reaction selectivities. In fact, AgNPs-based materials and their antimicrobial, optical, and electrical effects are at the forefront of nanotechnology, having applications in environmental disinfection, elimination of environmental pollutants, environmental detection, and energy conversions. This review aims to comprehensively summarize the advanced applications and fundamental mechanisms to provide the guidelines for future work in the field of AgNPs implanted functional materials. The state-of-art terms including (photo)(electro)catalytic reactions, heterojunction formation, the generation and attacking of ROS, genetic damage, hot electron generation and transfer, localized surface plasmon resonance (LSPR), plasmon resonance energy transfer (PERT), near field electromagnetic enhancement, structure-function relationship, and reaction selectivities have been covered in this review. It is expected that this review may provide insights into the rational development in the next generation of AgNPs-based nanomaterials with excellent performances.

Recent Advances in Plasmonic Photocatalysis Based on TiO2 and Noble Metal Nanoparticles for Energy Conversion, Environmental Remediation, and Organic Synthesis

Plasmonic photocatalysis has emerged as a prominent and growing field. It enables the efficient use of sunlight as an abundant and renewable energy source to drive a myriad of chemical reactions. For instance, plasmonic photocatalysis in materials comprising TiO₂ and plasmonic nanoparticles (NPs) enables effective charge carrier separation and the tuning of optical response to longer wavelength regions (visible and near infrared). In fact, TiO₂ -based materials and plasmonic effects are at the forefront of heterogeneous photocatalysis, having applications in energy conversion, production of liquid fuels, wastewater treatment, nitrogen fixation, and organic synthesis. This review aims to comprehensively summarize the fundamentals and to provide the guidelines for future work in the field of TiO₂ -based plasmonic photocatalysis comprising the above-mentioned applications. The concepts and state-of-the-art description of important parameters including the formation of Schottky junctions, hot electron generation and transfer, near field electromagnetic enhancement, plasmon resonance energy transfer, scattering, and photothermal heating effects have been covered in this review. Synthetic approaches and the effect of various physicochemical parameters in plasmon-mediated TiO₂ -based materials on performances are discussed. It is envisioned that this review may inspire and provide insights into the rational development of the next generation of TiO₂ -based plasmonic photocatalysts with target performances and enhanced selectivities.

Ag/AgCl nanoparticles embedded in porous TiO2: defect formation triggered by light irradiation

The photocatalytic activity of Ag/AgCl embedded in defective porous TiO₂ was dependent on the changes of Ti³⁺ and the formation of AgCl crystals.

TiO2 nanofibres decorated with green-synthesized PAu/Ag@CQDs for the efficient photocatalytic degradation of organic dyes and pharmaceutical drugs

Organic pollutants such as dyes and pharmaceutical drugs have become an environmental menace, particularly in water bodies owing to their unregulated discharge. It is thus required to develop an economically viable and environment-friendly approach for their degradation in water bodies. In this study, for the first time, we report green route-synthesized plasmonic nanostructures (PM-CQDs (where M: Au and Ag)) decorated onto TiO2 nanofibers for the treatment of toxic dye- and pharmaceutical drug-based wastewater. PM-CQDs are efficaciously synthesized using carbon quantum dots (CQDs) as the sole reducing and capping agent, wherein CQDs are derived via a green synthesis approach from Citrus limetta waste. The characteristic electron-donating property of CQDs played a key role in the reduction of Au3+ to Au0 and Ag+ to Ag0 under visible light irradiation to obtain PAu-CQDs and PAg-CQDs, respectively. Thus, the obtained CQDs, PAu-CQDs, and PAg-CQDs are loaded onto TiO2 nanofibers to obtain a PM-CQD/TiO2 nanocomposite (NC), and are further probed via transmission electron microscopy, scanning electron microscopy and UV-visible spectrophotometry. The degradation of organic pollutants and pharmaceutical drugs using methylene blue and erythromycin as model pollutants is mapped with UV-vis and NMR spectroscopy. The results demonstrate the complete MB dye degradation in 20 minutes with 1 mg mL-1 of PAu-CQD/TiO2 NC, which otherwise is 30 minutes for PAg@CQD/TiO2 dose under visible light irradiation. Similarly, the pharmaceutical drug was found to degrade in 150 minutes with PAu-CQD/TiO2 photocatalysts. These findings reveal the enhanced photocatalytic performance of the green-synthesized Au decorated with TiO2 nanofibers and are attributed to the boosted SPR effect and aqueous-phase stability of Au nanostructures. This study opens a new domain of utilizing waste-derived and green-synthesized plasmonic nanostructures for the degradation of toxic/hazardous dyes and pharmaceutical pollutants in water.

Photocatalytic Degradation of Methyl Orange by Magnetically Retrievable Supported Ionic Liquid Phase Photocatalyst

A magnetically retrievable ferrocene appended supported ionic liquid phase (SILP) photocatalyst containing a molybdate anion has been synthesized and characterized by Fourier transform infrared, X-ray photoelectron spectroscopy, transmission electron microscopy, X-ray diffraction, energy dispersive spectroscopy, and vibrating sample magnetometer analysis. The optical properties of the photocatalyst were probed by photoluminescence and UV-vis diffuse reflectance spectroscopy. The discharge of undesirable dye effluents from textile industrial plants in the environment is the major concern of environmental pollution and toxicity. In this context, we employed the as-prepared SILP photocatalyst for degradation of methyl orange (MO) under UV light (365 nm) irradiation, and subsequently, recycling studies were performed. The histological alteration in gills of the fish is employed as a tool for monitoring toxins in the environment. In view of this, the histo-toxicological assessment on freshwater fish Tilapia mossambica gills asserted the damage of secondary gill lamellae due to MO. Conversely, structural modifications in the gill architecture were not observed by virtue of photodegraded products confirming that the degraded product is nontoxic in nature. Additionally, the normal behavior of fishes on exposure to photodegraded products reveals that research findings are beneficial for the aquatic ecosystem.

Polyaniline/Reduced Graphene Oxide Composite-Enhanced Visible-Light-Driven Photocatalytic Activity for the Degradation of Organic Dyes

Creation of an innovative composite photocatalyst, to advance its performance, has attracted researchers to the field of photocatalysis. In this article, a new photocatalyst based on polyaniline/reduced graphene oxide (PANI/RGO) composites has been prepared via the in situ oxidative polymerization method employing RGO as a template. For thermoelectric applications, though a higher percentage (50 wt %) of RGO has been used, for photocatalytic activity, lesser percentages (2, 5, and 8 wt %) of RGO in the composite have given a significant outcome. Furthermore, photoluminescence (PL) spectra, time-resolved fluorescence spectra, and Brunauer-Emmett-Teller surface area analyses confirmed the improved photocatalytic mechanism. PANI/RGO composites under visible light irradiation exhibit amazingly improved activity toward the degradation of cationic and anionic dyes in comparison with pristine PANI or RGO. Here, a PANI/RGO composite, with 5 wt % RGO(PG2), has emerged as the best combination with the degradation percentages of 99.68, 99.35, and 98.73 for malachite green, rhodamine B, and congo red within 15, 30, and 40 min, respectively. Experimental findings show that the introduction of RGO can relieve the agglomeration of PANI nanoparticles and enhance the light absorption of the materials due to an increased surface area. Moreover, the PG2 composite also showed excellent photocatalytic activity to reduce noxious Cr(VI). The effective removal of Cr(VI) up to 94.7% at pH 2 was observed within only 15 min. With the help of the active species trapping experiment, a plausible mechanism for the photocatalytic degradation has been proposed. The heightened activity of the as-synthesized composite compared to that of neat PANI or RGO was generally because of high concentrations of ^•OH radicals and partly of ^•O₂ ^- and holes (h⁺) as concluded from the nitroblue tetrazolium probe test and photoluminescence experiment. It is hoped that the exceptional photocatalytic performance of our work makes the conducting polymer-based composite an effective alternative in wastewater treatment for industrial applications.

Synthesis of Superparamagnetic Cu0.4Zn0.6Fe2O4-Implanted Bi2S3-Capped TiO2 2D and 3D Nanostructures for Visible Light Photocatalysis

Sharp narrow nanopetal-like and wrinkled nanoball-like cubic Cu_0.4Zn_0.6Fe₂O₄-implanted orthorhombic Bi₂S₃-capped anatase TiO₂ heterostructures have been synthesized by a two-step hydrothermal process in acidic and basic environments. They have been characterized by high-resolution scanning and transmission electron microscopies, energy-dispersive X-ray spectroscopy, selected area electron and powder X-ray diffractometries, vibrating sample magnetometry, UV-visible diffuse reflectance and photoluminescence spectroscopies, and nitrogen adsorption-desorption analysis. Both the nanostructured composites are superparamagnetic. While the nanocomposite synthesized in acidic environment absorbs in the entire visible and UV spectral regions, the absorption edge of nanocomposite obtained in basic environment narrowly misses the red end of the visible spectrum. The emission spectra of both the nanomaterials are strikingly similar, indicating similar crystal defects in anatase TiO₂ lattice of both the nanocomposites. Although both the nanocomposites degrade dye under visible light, the photocatalytic activity of the sample obtained in acidic environment is superior to that prepared in basic condition. The enhanced photocatalytic activity of the nanocomposite synthesized in acidic environment is rationalized in terms of nanostructure, surface area, and optical properties.