One-Pot Magnetic Iron Oxide-Carbon Nanodot Composite-Catalyzed Cyclooxidative Aqueous Tandem Synthesis of Quinazolinones in the Presence of tert-Butyl Hydroperoxide

Unveiling the Untapped Potential of Bertagnini's Salts in Microwave-Assisted Synthesis of Quinazolinones

Microwave-assisted organic synthesis (MAOS) has emerged as a transformative technique in organic chemistry, significantly enhancing the speed, efficiency, and selectivity of chemical reactions. In our research, we have employed microwave irradiation to expedite the synthesis of quinazolinones, using water as an eco-friendly solvent and thereby adhering to the principles of green chemistry. Notably, the purification of the product was achieved without the need for column chromatography, thus streamlining the process. A key innovation in our approach is using aldehyde bisulfite adducts (Bertagnini's salts) as solid surrogates of aldehydes. Bertagnini's salts offer several advantages over free aldehydes, including enhanced stability, easier purification, and improved reactivity. Green metrics and Eco-Scale score calculations confirmed the sustainability of this approach, indicating a reduction in waste generation and enhanced sustainability outcomes. This methodology facilitates the synthesis of a diverse array of compounds, offering substantial contributions to the field, with potential for widespread applications in pharmaceutical research and beyond.

Visible light-mediated synthesis of quinazolinones from benzyl bromides and 2-aminobenzamides without using any photocatalyst or additive

This paper reports a novel method for the visible-light-mediated synthesis of quinazolinones from the reaction of benzyl bromides with 2-aminobenzamides. The reaction proceeded efficiently at room temperature upon irradiation with an 18 W blue light-emitting diode in air without photocatalysts or additives. By varying the solvent type, substrate molar ratio, and reaction time, the optimal reaction conditions, including the use of methanol solvent, room temperature, and reaction time of 28 h, were identified. Under these conditions, various quinazolinones were obtained using 18 substrates, with the highest yield of 93%. To determine the industrial value of the proposed method, a scale-up reaction was performed and 80% product yield was achieved. Mechanistic studies revealed that the reaction likely proceeded via a radical pathway and that the hydrogen bromide by-product generated during the first step of the reaction of benzyl bromide with 2-aminobenzamide promoted the subsequent step.

Microwave-assisted commercial copper-catalyzed aerobic oxidative synthesis of AChE quinazolinone inhibitors under solvent free conditions

A facile and green one-pot synthesis of AChE quinazolinone inhibitors was developed using microwave irradiation under solvent free conditions. Quinazolinones were synthesized from 2-aminobenzamide derivatives and various alcohols such as benzyl alcohol derivatives and butanol using economical commercially available copper as a catalyst in the presence of base, Cs2CO3. The desired products were achieved in moderate to high yields with up to 92% isolated yield. These quinazolinone products were then evaluated for acetylcholinesterase inhibition so that they can be developed as promising anti-acetylcholinesterase agents.

Salim R, Razali A. Reduced Graphene Oxide Functionalized Magnetic Nanocomposites for Environmental Pollutant Removal

Nowadays, the excessive and uncontrolled discharge of chemicals are imposing major health threats. The demands for clean and safe water amplifies the need to develop improved technologies for environmental contaminant removal. Considering the limitations of conventional methods for contaminants removal, we have prepared magnetic iron oxide nanoparticles functionalised with reduced graphene oxide as a potential material for environmental pollutants removal. The magnetic properties in potential adsorbent materials are highly desirable due to several advantages. Among which are their large adsorptive surface area, low diffusion resistance, high adsorption capacity and fast separation in large volumes of solution. The surface functionalised magnetic iron oxide nanoparticles (MNP) were fabricated using a one-pot hydrothermal method by adding reduced graphene oxide (rGO) into the reaction system. The graphene oxide were reduced prior to the addition in the hydrothemal decomposition step. The resultant rGO-MNP nanocomposites were characterised using FT-IR, SEM and VSM to investigate the functional groups, morphology and magnetic properties, resepectively. We also demonstrated the potential of the hybridised magnetic material with hydrophobic reduced graphene oxide for environmental pollutant removal.

Enhanced fluorescent iron oxide quantum dots for rapid and interference free recognizing lysine in dairy products

In this work, a simple, easy and selective method for sensing lysine in an acidic medium was developed based on fluorescent iron oxide quantum dots (IO QDs). IO QDs using the hydrothermal method were prepared with different conditions (concentration of NPs, amount of citric acid, heating time, heating temperature, and total volume in the hydrothermal reactor) where iron oxide nanoparticles (IO NPs) were used as the starting materials. TEM, FTIR, UV-Vis Spectrometry, fluorescence spectrometry, Powder XRD, VSM were used to characterize the as-prepared IO QDs. The surface of the IO QDs contained -OH, -COO^-, and other functional groups that acted as a bridge to bind the IO QDs nanoprobe with the surrounding analytes. Under acidic conditions (pH 3.0), IO QDs exhibited a rapid and interference-free fluorescence enhancement behavior after adding lysine within 2 min at room temperature, whereas other amino acids had no effect on IO QDs fluorescence. Therefore, the IO QDs prepared in this study have shown potential in lysine sensing applications. The results showed that the relative FL intensity was linear with lysine concentration in the range of 1-100 μM and had a detection limit of 0.66 μM. This proposed method has high selectivity for lysine over other amino acids, and the developed methods were used in real sample with good recoveries. Under relatively acidic conditions, a specific and fast lysine interaction was observed, resulting in the successful of IO QDs as the fluorescent probe for rapid and interference-free lysine assessment in dairy products.

Magneto-Luminescent Nanocomposites Based on Carbon Dots and Ferrite with Potential for Bioapplication

Multifunctional nanocomposites that combine both magnetic and photoluminescent (PL) properties provide significant advantages for nanomedical applications. In this work, a one-stage synthesis of magneto-luminescent nanocomposites (MLNC) with subsequent stabilization is proposed. Microwave synthesis of magnetic carbon dots (M-CDs) was carried out using precursors of carbon dots and magnetic nanoparticles. The effect of stabilization on the morphological and optical properties of nanocomposites has been evaluated. Both types of nanocomposites demonstrate magnetic and PL properties simultaneously. The resulting MLNCs demonstrated excellent solubility in water, tunable PL with a quantum yield of up to 28%, high photostability, and good cytocompatibility. Meanwhile, confocal fluorescence imaging showed that M-CDs were localized in the cell nuclei. Consequently, the multifunctional nanocomposites M-CDs are promising candidates for bioimaging and therapy.

Carbon Dots/Iron Oxide Nanoparticles with Tuneable Composition and Properties

We present a simple strategy to generate a family of carbon dots/iron oxide nanoparticles (C/Fe-NPs) that relies on the thermal decomposition of iron (III) acetylacetonate in the presence of a highly fluorescent carbon-rich precursor (derived via thermal treatment of ethanolamine and citric acid at 180 °C), while polyethylene glycol serves as the passivation agent. By varying the molar ratio of the reactants, a series of C/Fe-NPs have been synthesized with tuneable elemental composition in terms of C, H, O, N and Fe. The quantum yield is enhanced from 6 to 9% as the carbon content increases from 27 to 36 wt%, while the room temperature saturation magnetization is improved from 4.1 to 17.7 emu/g as the iron content is enriched from 17 to 31 wt%. In addition, the C/Fe-NPs show excellent antimicrobial properties, minimal cytotoxicity and demonstrate promising bioimaging capabilities, thus showing great potential for the development of advanced diagnostic tools.

Doxycycline detection and degradation in aqueous media via simultaneous synthesis of Fe-N@Carbon dots and Fe3O4-Carbon dot hybrid nanoparticles: One arrow two hawk approach

The overuse of antibiotics in recent years presents a huge challenge to society for their removal from the environment. The prolonged presence of antibiotics as environmental pollutants results in the...

Electrochemical synthesis of quinazolinone via I2-catalyzed tandem oxidation in aqueous solution

The development of protocols for synthesizing quinazolinones using biocompatible catalysts in aqueous medium will help to resolve the difficulties of using green and sustainable chemistry for their synthesis. Herein, using I₂ in coordination with electrochemical synthesis induced a C-H oxidation reaction which is reported when using water as the environmentally friendly solvent to access a broad range of quinazolinones at room temperature. The reaction mechanism strongly showed that I₂ cooperates electrochemically promoted the oxidation of alcohols, then effectively cyclizing amides to various quinazolinones.

Photoinduced Enhanced Decomposition of TBHP: A Convenient and Greener Pathway for Aqueous Domino Synthesis of Quinazolinones and Quinoxalines

Catalyst-free photoinduced processes in aqueous medium represent significant advancement toward development of green and sustainable pathways in organic synthesis. tert-Butyl hydroperoxide (TBHP) is a widely used oxidant in organic reactions, where the decomposition of TBHP into its radicals by metal catalysts or other reagents is a key factor for efficient catalytic outcome. Herein, we report a simple and environmentally friendly visible light-promoted synthetic pathway for the synthesis of N-heterocyclic moieties, such as quinazolinones and quinoxalines, in the presence of TBHP as an oxidizing agent in aqueous medium that requires no catalysts/photocatalysts. The enhanced rate of decomposition to generate free radicals from TBHP upon visible light irradiation is the driving force for the domino reaction.

Carbon dots derived from kanamycin sulfate with antibacterial activity and selectivity for Cr6+ detection

Among antibacterial nanomaterials, carbon dots (CDs) have attracted much attention because of their unique physical and chemical properties and good biosafety. In this study, kanamycin sulfate (Kan), a broad-spectrum antibiotic, was used to synthesize novel carbon dots (CDs-Kan) by a one-step hydrothermal method. CDs-Kan showed good inhibitory effects on Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. Further, scanning electron microscopy revealed that treatment with CDs-Kan and Kan resulted in the same phenomena. In particular, the morphologies of S. aureus cells treated with CDs-Kan and Kan became smaller and irregular, whereas the surfaces of E. coli cells protruded and formed vesicles. These results indicated that CDs-Kan was shown to retain the good antibacterial activity of Kan as well as its main bactericidal functional groups, namely, the amino sugar and amino cyclic alcohol, We refer to this phenomenon as the "preservation property". We also found that CDs-Kan has good biocompatibility and nontoxic properties. Moreover, CDs-Kan was successfully applied to the biological imaging of fungi and plant cells. In addition, CDs-Kan could be used as a fluorescent probe for the quick, sensitive, and selective detection of Cr⁶⁺. Therefore, CDs-Kan not only retained the good bacteriostatic properties of Kan but also expanded its application in bioimaging and biosensors.

A magnetically retrievable copper ionic liquid nanocatalyst for cyclooxidative synthesis of 2-phenylquinazolin-4(3H)-ones

In the present work, we report the design and fabrication of a copper-containing ionic liquid supported magnetic nanocatalyst via a convenient and straightforward synthetic approach for the formation of 2-phenylquinazolin-4(3H)-ones using o-aminobenzamide and benzaldehydes as the reaction partners. The successful formation and properties of the as-prepared catalyst have been thoroughly investigated using diverse physico-chemical techniques including FT-IR, XRD, FE-SEM, TEM, ICP, VSM, BET and TGA. Using this nanocatalytic system, a variety of 2-phenylquinazolin-4(3H)-ones are synthesized in excellent yields with operational ease and short reaction times in an environmentally preferable solvent under open air and without using any external oxidizing agent. Besides, the catalyst possessed facile magnetic recoverability and remarkable reusability for six consecutive runs without any appreciable decrease in the catalytic efficiency.

Bifunctional Carbon Dots-Magnetic and Fluorescent Hybrid Nanoparticles for Diagnostic Applications

There is a huge demand for materials capable of simple detection or separation after conjugation with specific biologic substances when applied as a diagnostic tools. Taking into account the photoluminescence properties of C-dots and the highly magnetic properties of Fe(0), a new hybrid composite of these components was synthesized via ultrasound irradiation. The material was fully characterized by various physicochemical techniques. The main goal of the current study was to obtain a highly magnetic and intense fluorescent hybrid material. The goal was achieved. In addition, magnetic particles tended to agglomerate. The new hybrid can be suspended in ethanol, which is an additional feature of the current research. The dispersion of the hybrid nanoparticles in ethanol was achieved by utilizing the interaction of iron particles with C-dots which were decorated with functional groups on their surface. The newly formed hybrid material has potential applications in diagnostic by conjugating with specific antibodies or with any other biologic compounds. Such application may be useful in detection of various diseases such as: cancer, tuberculosis, etc.

Carbon dot-based composites for catalytic applications

We summarize the construction methods and influencing factors of CDs-based composites and discuss their catalytic applications, including photocatalysis, chemical catalysis, peroxidase-like catalysis, Fenton-like catalysis and electrocatalysis.

Counter Anion-Directed Growth of Iron Oxide Nanorods in a Polyol Medium with Efficient Peroxidase-Mimicking Activity for Degradation of Dyes in Contaminated Water

Development of nanozymes, which are nanomaterials with intrinsic enzymatic properties, has emerged as an appealing alternative to the natural enzymes with tremendous application potential from the chemical industry to biomedicine. The self-assembled growth of micrometer-sized oxide materials with controlled nonspherical shapes can be an important tool for enhancing activity as artificial enzymes, as the formation of these superstructures often results in high surface area with favorable impact on catalytic activity. Herein, the growth of rod-shaped Fe3O4 microstructures via a one-pot microwave-based method and using a water-poly(ethylene glycol) mixture as a solvent is reported, without the involvement of external shape-directing agents. The precursor metal salt played a key role in the size, shape, and phase selective evolution of iron oxide micro/nanomaterials. Whereas self-assembled microrod superstructures were obtained using Fe(NO3)3 as the metal salt precursor, use of FeCl3 or Fe-acetate as precursors afforded hollow Fe2O3 microparticles and Fe3O4 nanoparticles, respectively. A graphitic layer was deposited on the Fe3O4 surface, imparting a negative surface charge as a result of a high-temperature treatment of poly(ethylene glycol). The rod-shaped Fe3O4 microcrystals show efficient peroxidase-mimicking activity toward 3,3,5,5'-tetramethylbenzidine and pyrogallol as peroxidase substrates with a Michaelis-Menten rate constant (K m) value of 0.05 and 0.52 mM, respectively. The proficient enzyme mimicking behavior of these magnetic superstructures was further explored for the degradation of organic dyes that includes rhodamine B, methylene blue, and methyl orange with a rate constant (k) of 0.038, 0.011, and 0.007 min-1 respectively, using H2O2. This fast and simple method could help to develop a new pathway for differently shaped oxide nanoparticles in a sustainable and economical manner that can be harnessed as nanozymes for industrial as well as biological applications.

Preparation of Large-Size, Superparamagnetic, and Highly Magnetic Fe3O4@PDA Core⁻Shell Submicrosphere-Supported Nano-Palladium Catalyst and Its Application to Aldehyde Preparation through Oxidative Dehydrogenation of Benzyl Alcohols

Large-size, superparamagnetic, and highly magnetic Fe3O4@PDA core-shell submicrosphere-supported nano-palladium catalysts were prepared in this study. Dopamine was encapsulated on the surface of Fe3O4 particles via self-polymerization and then protonated to positively charge the microspheres. PdCl42- was dispersed on the surface of the microspheres by positive and negative charge attraction and then reduced to nano-palladium. With air as oxidant, the catalyst can successfully catalyze the dehydrogenation of benzyl alcohols to produce the corresponding aldehydes at 120 °C.