Catalysis of Cu Cluster for NO Reduction by CO: Theoretical Insight into the Reaction Mechanism

Selective Reduction of NO into N2 Catalyzed by the RhM2O3- Clusters (M = Ta, V, and Al): Importance of the Triatomic Lewis Acid-Base-Acid Mδ+-Rhδ--Mδ+ Site

Catalytic NO reduction by CO into N2 and CO2 is imperative owing to the increasingly rigorous emission regulation. Identifying the nature of active sites that govern the reactivity and selectivity of NO reduction is pivotal to tailor catalysts, while it is extremely challenging because of the complexity of real-life systems. Guided by our newly discovered triatomic Lewis acid-base-acid (LABA, Ceδ+-Rhδ--Ceδ+) site that accounts for the selective reduction of NO into N2 catalyzed by the RhCe2O3- cluster in gas-phase experiments, the reactivity of the RhM2O3- (M = Ta, V, and Al) clusters in catalytic NO reduction by CO was explored. We determined theoretically that the LABA site still prevails to reduce NO to N2 mediated by RhTa2O3- and RhV2O3-, and the strong M-oxygen affinity was emphasized to construct the LABA site. An overall assessment highlights that RhV2O3- functions as a more promising catalyst because the well-fitting V-O bonding strength facilitates both elementary reactions of NO reduction and CO oxidation.

Catalytic removal of gaseous pollutant NO using CO: Catalyst structure and reaction mechanism

Carbon monoxide (CO) has recently been considered an ideal reducing agent to replace NH3 in selective catalytic reduction of NOx (NH3-SCR). This shift is particularly relevant in diesel engines, coal-fired industry, the iron and steel industry, of which generate substantial amounts of CO due to incomplete combustion. Developing high-performance catalysts remain a critical challenge for commercializing this technology. The active sites on catalyst surface play a crucial role in the various microscopic reaction steps of this reaction. This work provides a comprehensive overview and insights into the reaction mechanism of active sites on transition metal- and noble metal-based catalysts, including the types of intermediates and active sites, as well as the conversion mechanism of active molecules or atoms. In addition, the effects of factors such as O2, SO2, and alkali metals, on NO reduction by CO were discussed, and the prospects for catalyst design are proposed. It is hoped to provide theoretical guidance for the rational design of efficient CO selective catalytic denitration materials based on the structure-activity relations.

Selective and Stable CO2 Electroreduction to CH4 via Electronic Metal-Support Interaction upon Decomposition/Redeposition of MOF

The CO2 electroreduction to fuels is a feasible approach to provide renewable energy sources. Therefore, it is necessary to conduct experimental and theoretical investigations on various catalyst design strategies, such as electronic metal-support interaction, to improve the catalytic selectivity. Here a solvent-free synthesis method is reported to prepare a copper (Cu)-based metal-organic framework (MOF) as the precursor. Upon electrochemical CO2 reduction in aqueous electrolyte, it undergoes in situ decomposition/redeposition processes to form abundant interfaces between Cu nanoparticles and amorphous carbon supports. This Cu/C catalyst favors the selective and stable production of CH4 with a Faradaic efficiency of ≈55% at -1.4 V versus reversible hydrogen electrode (RHE) for 12.5 h. The density functional theory calculation reveals the crucial role of interfacial sites between Cu and amorphous carbon support in stabilizing the key intermediates for CO2 reduction to CH4 . The adsorption of COOH* and CHO* at the Cu/C interface is up to 0.86 eV stronger than that on Cu(111), thus promoting the formation of CH4 . Therefore, it is envisioned that the strategy of regulating electronic metal-support interaction can improve the selectivity and stability of catalyst toward a specific product upon electrochemical CO2 reduction.

Noble Metal Nanoparticles Decorated Boron Nitride Nanotubes for Efficient and Selective Low-Temperature Catalytic Reduction of Nitric Oxide with Carbon Monoxide

Parallel to CO₂ emission, NO_x emission has become one of the menacing problems that seek a simple, durable, and high-efficiency deNO_x catalyst. Herein, we demonstrated simple syntheses of platinum group metal nanoparticle-decorated f-BNNT (PGM = Pd, Pt, and Rh, and f-BNNT stands for -OH-functionalized boron nitride nanotubes) as a catalyst for efficient and selective reduction of NO by CO at low-temperature conditions. PGM/f-BNNT with a low amount of noble metal nanoparticles (0.7-0.8 wt %) presents very efficient catalytic activity for NO reduction as well as CO oxidation during their removal process. The removal efficiencies of NO and CO with Pd/f-BNNT, Pt/f-BNNT, and Rh/f-BNNT catalysts were investigated under various temperatures, flow rates, and reaction times, respectively. For most cases, NO catalytic reduction with CO reaction was >99% at a temperature as low as ∼200 °C. The catalyst robustness and efficiency were also verified by presenting almost 100% conversion of NO using a Rh/f-BNNT catalyst, which was aged under humid air at 600 and 700 °C for 24 h, respectively. The synergic effect of the catalytic efficacy of the well-dispersed noble metal nanoparticles and the excellent surface properties of BNNT are reasons for the high selectivity and catalytic property at a low temperature. On the basis of this investigation, we demonstrated that the noble metal nanoparticle-decorated f-BNNT catalysts are possible to save expensive PGM catalysts, such as Pt, Pd, and Rd, as much as 100 times while presenting similar or better catalytic performance for simultaneous NO and CO removals.

Cr-Fe-Ni-Cu Quaternary Nanostructure as a Substitute for Precious Metals in Automotive Three-Way Catalysts

The replacement of precious metals (Rh, Pd, and Pt) in three-way catalysts with inexpensive and earth-abundant metal alternatives is an ongoing challenge. In this research, we examined various quaternary metal catalysts by selecting from six 3d transition metals, i.e., Cr, Mn, Fe, Co, Ni, and Cu, equimolar amounts (0.1 mol each), which were prepared on the Al2O3 support (1 mol Al) using H2 reduction treatment at 900 °C. Among 15 combinations, the best catalytic performance was achieved by the CrFeNiCu system. Light-off of NO-CO-C3H6-O2-H2O mixtures proceeded at the lowest temperature of ≤200 °C for CO, ≤300 °C for C3H6, and ≤400 °C for NO when the molar fraction of Cr in Cr x Fe0.1Ni0.1Cu0.1 was around x = 0.1. The activity for CO/C3H6 oxidation was superior to that of reference Pt/Al2O3 catalysts but was less active for NO reduction. The structural analysis using scanning transmission electron microscopy and X-ray absorption spectroscopy showed that the as-prepared catalyst consisted of FeNiCu alloy nanoparticles dispersed on the Cr2O3-Al2O3 support. However, the structural change occurred under a catalytic reaction atmosphere, i.e., producing NiCu alloy nanoparticles dispersed on a NiFe2O4 moiety and Cr2O3-Al2O3 support. The oxidation of CO/C3H6 can be significantly enhanced in the presence of Cr oxide, resulting in a faster decrease in O2 concentration and thus regenerating the NiCu metallic surface, which is active for NO reduction to N2.

Synergistic Effects in the Activity of Nano-Transition-Metal Clusters Pt12M (M = Ir, Ru or Rh) for NO Dissociation

The dissociation of environmentally hazardous NO through dissociative adsorption on metallic clusters supported by oxides, is receiving growing attention. Building on previous research on monometallic M 13  clusters [J. Phys. Chem. C, 2019, 123(33), 20314-20318], this work considers bimetallic Pt 12 M (M = Rh, Ru or Ir) clusters. The adsorption energy and activation energy of NO dissociation on the clusters have been calculated in vacuum using Koh,-Sham DFT, while their trends were rationalized using reactivity indices such as molecular electrostatic potential and global Fermi softness. The results shown that doping of the Pt clusters lowered the adsorption energy as well as the activation energy for NO dissociation. Furthermore, reactivity indices were calculated as a first estimate of the performance of the clusters in realistic amorphous silica pores (MCM-41) through  ab initio  molecular dynamics simulations.

Insights into N-Coordinated Bimetallic Site Synergy during NO Selective Catalytic Reduction by CO

The nature of the synergistic effect in bimetallic catalysts remains a challenging issue, due to the difficulty in understanding the adjacent interaction between dual metals at the atomic level. Herein, a CuFe-N/C catalyst featuring diatomic metal-nitrogen sites was prepared through a sequential ion exchange strategy and applied for NO selective catalytic reduction by CO (CO-SCR). The bimetallic CuFe-N/C catalyst exhibits high N₂ selectivity with a NO conversion efficiency of nearly 100% over a wide temperature range from 225 to 400 °C, significantly higher than that of its single-component counterparts. The synergistic effect of bimetallic Cu-Fe sites is well revealed using the combined in situ FTIR technique and DFT calculations. Bifunctional Cu-Fe sites are demonstrated not only to provide two different preferential adsorption centers for the CO molecule and ONNO intermediate but also to achieve a complete electron cycle for efficient interfacial electron transfer upon ONNO uptake. The unique electron transfer mechanism stemmed from 4s-3d-type electron coupling, and different 3d shell fillings of Cu (3d¹⁰) and Fe (3d⁶) atoms are presented. These fundamental insights pave the way for the understanding of N-coordinated bimetallic site synergy and rational design of highly active atomic-scale metal catalysts for SCR applications.

A flat-lying dimer as a key intermediate in NO reduction on Cu(100)

The reaction of nitric oxide (NO) on Cu(100) is studied by scanning tunneling microscopy, electron energy loss spectroscopy and density functional theory calculations. The NO molecules adsorb mainly as monomers at 64 K, and react and dissociate to yield oxygen atoms on the surface at ∼70 K. The temperature required for the dissociation is significantly low for Cu(100), compared to those for Cu(111) and Cu(110). The minimum energy pathway of the reaction is via (NO)2 formation, which converts into a flat-lying ONNO and then dissociates into N2O and O with a considerably low activation energy. We propose that the formation of (NO)2 and flat-lying ONNO is the key to the exceptionally high reactivity of NO on Cu(100).

Theoretical Study of NO Dissociative Adsorption onto 3d Metal Particles M55 (M = Fe, Co, Ni, and Cu): Relation between the Reactivity and Position of the Metal Element in the Periodic Table

NO dissociative adsorption onto 3d metal particles M55 (M = Fe, Co, Ni, and Cu) was investigated theoretically using density functional theory computations. A transition state exists at higher energy in the Cu case but at lower energy in the Fe, Co, and Ni cases than the reactant (sum of M55 and NO), indicating that Cu55 is not reactive for NO dissociative adsorption because NO desorption occurs more easily than the N-O bond cleavage in this case, but Fe55, Co55, and Ni55 are reactive because NO desorption needs a larger destabilization energy than the N-O bond cleavage. This result agrees with the experimental findings. The energy of transition state E(TS) becomes higher in the order of Fe < Co < Ni ≪ Cu. Exothermicity E exo (relative energy to the reactant) decreases in the order of Fe > Co > Ni ≫ Cu. These results indicate that the reactivity for NO dissociative adsorption decreases kinetically and thermodynamically in this order. In addition, the E(TS) and E exo values show that 3d metal particles are more reactive than 4d metal particles when a comparison is made in the same group of the periodic table. Charge transfer (CT) from the metal particle to NO increases as the reaction proceeds. The CT quantity to NO at the TS increases in the order of Cu < Ni < Co < Fe, identical to the increasing order of reactivity. The negative charges of the N and O atoms of the product (N and O adsorbed M55) increase in the order of Ni < Co < Cu < Fe, identical to the increasing order of E exo except for the Cu case; in the Cu case, the discrepancy between the order of E exo and those of the N and O negative charges arises from the presence of valence 4s electron of Cu because it suppresses the CT from N and O to Cu55. From these results, one can infer that the d-valence band-top energy of M55 plays an important role in determining the reactivity for NO dissociative adsorption. Truly, the d valence orbital energy decreases in the order of Fe > Co > Ni ≫ Cu and the 3d metal > 4d metal in the same group of the periodic table, which reflects the dependence of reactivity on the metal element position in the periodic table.

The catalytic decomposition of nitrous oxide and the NO + CO reaction over Ni/Cu dilute and single atom alloy surfaces: first-principles microkinetic modelling

Density functional theory calculations and microkinetic modelling reveal that well-engineered Ni/Cu dilute alloys are promising for the catalytic reduction of NO by CO.

Propene oxidation catalysis and electronic structure of M55 particles (M = Pd or Rh): differences and similarities between Pd55 and Rh55

Propene oxidation is one of the important reactions that occurs in the presence of a three-way catalyst but its reaction mechanism is unclear. The reaction mechanisms and differences in catalysis between Pd and Rh particles were investigated by DFT calculations employing Pd₅₅ and Rh₅₅ as the model catalysts. The O-attack mechanism, in which the O atom adsorbed on the Pd₅₅ and Rh₅₅ surfaces attacks the C[double bond, length as m-dash]C double bond of propene, needs to overcome a large activation barrier (E_a). On the other hand, C-H bond cleavage of the methyl group of propene easily occurs with moderate E_a; the mechanism initiated by this C-H activation is named H-transfer mechanism. In this mechanism, the next step is allyl alcohol formation, followed by the second C-H bond activation of the CH₂OH species of allyl alcohol, and the final step is proton transfer from OH-substituted π-allyl species to the OH group on the metal surface to yield acrolein and water molecules with the regeneration of M₅₅. The rate-determining step is the second C-H bond activation. Its E_a is 17.4 kcal mol^-1 for the reaction on Pd₅₅ and 34.4 kcal mol^-1 for the reaction on Rh₅₅. These results indicate that Pd particles are more active than Rh particles in propene oxidation, which agrees with the experimental findings. The larger E_a for Rh₅₅ than that for Pd₅₅ arises from the stronger Rh-OH bond than the Pd-OH bond. The higher energy d-valence band-top of Rh₅₅ than that of Pd₅₅ is the origin of the stronger Rh-OH bond than the Pd-OH bond. Thus, the d-valence band-top energy is an important property for understanding and designing catalysts for alkene oxidation.

The influence of support composition on the activity of Cu:Ce catalysts for selective catalytic reduction of NO by CO in the presence of excess oxygen

Excellent catalytic performance for NO reduction by CO in the presence of 5% O₂ over Cu1:Ce3/Al₂O₃.

Study on the Adsorption and Activation Behaviours of Carbon Dioxide over Copper Cluster (Cu4) and Alumina-Supported Copper Catalyst (Cu4/Al2O3) by means of Density Functional Theory

The adsorption and activation of carbon dioxide over copper cluster (Cu4) and copper doped on the alumina support (Cu4/Al2O3) catalytic systems have been investigated by using density functional theory and climbing image nudged elastic band. The adsorption energies, geometrical configurations, and electronic properties are analysed. The results show the strong chemical interaction between the copper cluster and the alumina support. Both the Cu4 cluster and Cu4/Al2O3 systems have a high adsorption ability for CO2, and the adsorption process is of chemical nature. The role of the alumina support in the adsorption and activation of CO2 has been addressed. The calculated results show that the “synergistic effect” between Al2O3 and Cu4 is the key factor in the activation of CO2.

A Cu-Pd single-atom alloy catalyst for highly efficient NO reduction

A series of Cu-Pd alloy nanoparticles supported on Al2O3 were prepared and tested as catalysts for deNO x reactions. XRD, HAADF-STEM, XAFS, and FT-IR analyses revealed that a single-atom alloy structure was formed when the Cu/Pd ratio was 5, where Pd atoms were well isolated by Cu atoms. Compared with Pd/Al2O3, Cu5Pd/Al2O3 exhibited outstanding catalytic activity and N2 selectivity in the reduction of NO by CO: for the first time, the complete conversion of NO to N2 was achieved even at 175 °C, with long-term stability for at least 30 h. High catalytic performance was also obtained in the presence of O2 and C3H6 (model exhaust gas), where a 90% decrease in Pd use was achieved with minimum evolution of N2O. Kinetic and DFT studies demonstrated that N-O bond breaking of the (NO)2 dimer was the rate-determining step and was kinetically promoted by the isolated Pd.

Reaction Behavior of the NO Molecule on the Surface of an Mn Particle (M = Ru, Rh, Pd, and Ag; n = 13 and 55): Theoretical Study of Its Dependence on Transition-Metal Element

Reaction of NO molecule on M₁₃ and M₅₅ clusters (M = Ru, Rh, Pd, and Ag) was theoretically investigated to elucidate why its reaction behavior depends on the position of metal element in the periodic table. DFT computations show that NO dissociative adsorption occurs on M = Ru and Rh, NO molecular adsorption occurs on M = Pd, and NO dimerization occurs on M = Ag, which agree with experimental findings. The d-band center and d-band top become lower in energy following the order Ru > Rh > Pd > Ag; this is one of the characteristic features of the periodic table. In the Ag cluster, the valence band-top consists of Ag 5s orbital and its energy is higher than the d-band top of Pd. For NO dissociative adsorption, the M-N and M-O bond strengths are crucially important at the transition state and the product, to which the metal d orbital contributes very much. Ru and Rh clusters have a high energy d-band center and d-valence band top, leading to the formation of strong M-N and M-O bonds. Pd and Ag clusters have a low energy d-band center and d-band top, leading to the formation of weak M-N and M-O bonds. Because the Ag cluster has a high energy 5s valence band that can overlap well with the π* + π* MO of ONNO (NO dimer) moiety due to the same symmetry, charge transfer (CT) occurs from the Ag cluster to the π* + π* MO, which is indispensable for NO dimerization. The 4d-valence band top of Ru and Rh clusters does not fit to the π* + π* MO because of the different symmetry. Though the d-valence band top of the Pd cluster can overlap with the π* + π* MO, its energy is low, which is not good for the CT. Thus, the reactivity of metal cluster for NO is determined by the energy and type (4d or 5s) of the valence band top, which both depend on the position of element in the periodic table; accordingly, Ru and Rh clusters are reactive for NO dissociative adsorption, the Ag cluster is reactive for NO dimerization, but the Pd cluster is not reactive for both and only NO molecular adsorption is possible.