Fluorescence Turn-On, Specific Detection of Cystine in Human Blood Plasma and Urine Samples by Nitrogen-Doped Carbon Quantum Dots

Highly efficient and sensitive detection of tetracycline in environmental water: Insights into the synergistic mechanism of biomass-derived carbon dots and N-methyl pyrrolidone solvent

The tetracycline (TC) residue in water environment has caused serious public safety issue. Thus, efficient sensing of TC is highly desirable for environmental protection. Herein, biomass-derived nitrogen-doped carbon dots (N-CDs) synthesized from natural Ophiopogon japonicus f. nanus (O. japonicus) were used for TC detection. The unique solvent synergism efficiently enhanced detection sensitivity, and the detailed sensing mechanism was deeply investigated. The blue fluorescence of N-CDs was quenched by TC via static quenching and inner filter effect. Moreover, the enhancement of green fluorescence from deprotonated TC was firstly proposed and sufficiently verified. The solvent effect of N-methyl pyrrolidone (NMP) and the fluorescence resonance energy transfer (FRET) with N-CDs achieved an instantaneous enhancement of the green emission by 64-fold. Accordingly, a ratiometric fluorescence method was constructed for rapid and sensitive sensing of TC with a low detection limit of 6.3 nM within 60 s. The synergistic effect of N-CDs and solvent assistance significantly improved the sensitivity by 7-fold compared to that in water. Remarkably, the biomass-derived N-CDs displayed low cost, good solubility, and desired stability. The deep insights into the synergism with solvent can provide prospects for the utilization of biomass-based materials and broaden the development of advanced sensors with promising applications.

Orange-Red-Emitting Carbon Dots for Bilirubin Detection and Its Antibacterial Activity Against Escherichia coli and Staphylococcus aureus

In this study, orange-red-emitting carbon dots (OR-CDs) were prepared from p-phenylenediamine (p-PDA) and urea as starting precursors through the hydrothermal method. The OR-CDs exhibited bright orange-red fluorescence at 618 nm when excited at 480 nm. The obtained OR-CDs exhibited stable photophysical properties under different physiological conditions. The unique photophysical property of OR-CDs were then utilized for fluorometric determination of bilirubin. The fluorometric assay revealed that the fluorescence intensity of OR-CDs is gradually quenched upon the addition of bilirubin (1-20 μM). The mechanism of fluorescence quenching was evaluated by steady-state fluorescence analysis and time-correlated single photon counting measurements. The OR-CDs showed good selectivity and sensitivity toward bilirubin over other common interfering biomolecules. The present fluorometric assay showed a linear response toward bilirubin between 1 and 10 μM with a limit of detection of 4.80 nM. Further, a fluorescence test cotton swab-based detection probe has been successfully developed by incorporating OR-CDs for the point-of-care detection of bilirubin in biofluids. Furthermore, a light-emitting diode light that emits orange-red light was prepared by embedding the OR-CDs within the poly(vinyl alcohol) polymer matrix. Moreover, the antibacterial activity of OR-CDs was tested against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. The antibacterial efficacy of OR-CDs was demonstrated by various mechanisms, such as reactive oxygen species generation, destruction of cell structure, chemical binding to membrane, and surface wrapping. Interestingly, the survival assay against L929 fibroblast cells exhibits favorable biocompatibility and bioimaging.

Deep-Learning-Assisted Discriminative Detection of Vitamin B12 and Vitamin B9 by Fluorescent MoSe2 Quantum Dots

A facile and environmentally mindful approach for the synthesis of MoSe2 QDs was developed via the hydrothermal method from bulk MoSe2. In this, the exfoliation of MoSe2 was enhanced with the aid of an intercalation agent (KOH), which could reduce the exfoliation time and increase the exfoliation efficiency to form MoSe2 QDs. We found that MoSe2 QDs display blue emission that is suitable for different applications. This fluorescence property of MoSe2 QDs was harnessed to fabricate a dual-modal sensor for the detection of both vitamin B12 (VB12) and vitamin B9 (VB9), employing fluorescence quenching. We performed a detailed study on the fluorescence quenching mechanism of both analytes. The predominant quenching mechanism for VB12 is via Förster resonance energy transfer. In contrast, the recognition of VB9 primarily relies on the inner filter effect. We applied an emerging and captivating approach to pattern recognition, the deep-learning method, which enables machines to "learn" patterns through training, eliminating the need for explicit programming of recognition methods. This attribute endows deep-learning with immense potential in the realm of sensing data analysis. Here, analyzing the array-based sensing data, the deep-learning technique, "convolution neural networks", has achieved 93% accuracy in determining the contribution of VB12 and VB9.

Smart carbon-based sensors for the detection of non-coding RNAs associated with exposure to micro(nano)plastics: an artificial intelligence perspective

Micro(nano)plastics (MNPs) are pervasive environmental pollutants that individuals eventually consume. Despite this, little is known about MNP's impact on public health. In this article, we assess the evidence for potentially harmful consequences of MNPs in the human body, concentrating on molecular toxicity and exposure routes. Since MNPs are present in various consumer products, foodstuffs, and the air we breathe, exposure can occur through ingestion, inhalation, and skin contact. MNPs exposure can cause mitochondrial oxidative stress, inflammatory lesions, and epigenetic modifications, releasing specific non-coding RNAs in circulation, which can be detected to diagnose non-communicable diseases. This article examines the most fascinating smart carbon-based nanobiosensors for detecting circulating non-coding RNAs (lncRNAs and microRNAs). Carbon-based smart nanomaterials offer many advantages over traditional methods, such as ease of use, sensitivity, specificity, and efficiency, for capturing non-coding RNAs. In particular, the synthetic methods, conjugation chemistries, doping, and in silico approach for the characterization of synthesized carbon nanodots and their adaptability to identify and measure non-coding RNAs associated with MNPs exposure is discussed. Furthermore, the article provides insights into the use of artificial intelligence tools for designing smart carbon nanomaterials.

Cyan Fluorescent Carbon Quantum Dots with Amino Derivatives for the Visual Detection of Copper (II) Cations in Sea Water

Amino- and carboxyl-functionalized carbon quantum dots (Amino-CQDs) were synthesized through fast and simple microwave treatment of a citric acid, ethylenediamine and ethylenediaminetetraacetic acid (EDTA) mix. The reproducible and stable optical properties from newly synthesized CQD dispersion with a maximum absorbance spectra at 330 nm and the symmetric emission maximum at 470 nm made the Amino-CQDs a promising fluorescence material for analytical applications. The highly aminated and chelate moieties on the CQDs was appropriate for a copper (Cu²⁺) cation sensor in the linear range from 1 × 10^-4 mg/mL to 10 mg/mL with a limit of detection at 0.00036 mg/mL by static fluorescence quenching effects. Furthermore, Amino-CQDs demonstrated stable fluorescence parameters for assays in diluted alkali metal solution (Na⁺ and K⁺) and sea water. Finally, a visual sensor, based on Amino-CQDs, was successfully created for the 0.01-100 mg/mL range to produce a colorimetric effect that can be registered by computer vision software (Open CV Python).

Aflatoxin B1 Acts as an Effective Energy Donor to Enhance Fluorescence of Yellow Emissive Carbon Dots

Carbon dots (CDs) are versatile fluorescent nanocrystals with unique optical and structural properties and are commonly used in biosensing, bioimaging, and biomolecule tagging studies. However, fluorescence of CDs is brightest in the wavelength range of 430-530 nm, which overlaps with the autofluorescence range of many eukaryotic cells and makes CDs impractical for in vivo and in vitro imaging studies. Thus, the design of yellow-red emissive CDs with high quantum yield is of importance. In this study, the quantum yield of traditional yellow emissive CDs was enhanced by two different methods: (1) the surface of traditional yellow emissive CDs passivated with a biomolecule, urea, through easy, rapid, inexpensive microwave assisted synthesis methods and (2) a fluorescent biomolecule, aflatoxin B1, used as an energy donor for yellow emissive CDs. In the first method, the quantum yield of the CDs was enhanced to 51%. In the second method, an efficient energy transfer (above 40%) from aflatoxin B1 to the CDs was observed. Our study showed that highly luminescent yellow emissive CDs can be synthesized by simple, rapid microwave assisted synthesis methods, and these CDs are potential candidates to sense aflatoxin B1. Furthermore, our results indicated that Aflatoxin B1 can be considered as an emission booster for CDs.

Microwave-assisted green synthesis of multi-functional carbon quantum dots as efficient fluorescence sensor for ultra-trace level monitoring of ammonia in environmental water

This study reports a facile green preparation of self-assembled multi-functional carbon quantum dots (CQDs) via direct pyrolysis technique coupled with microwave-assisted synthesis using Ziziphus Mauritiana stone biomass (as a bio-resource precursor). The synthesized multi-functional CQDs was characterized using FT-IR, XRD, XPS, TEM, and fluorescence spectroscopy techniques. The results exhibit that the prepared CQDs are spherical-shaped with an average diameter of 2-4 nm and showed bright bluish-green emissions property with stable dispersion and high photostability in the aqueous medium. Furthermore, the emission properties of CQDs were examined by quenched with ammonia (NH₃) and other molecules in aqueous media. Results indicated that the developed CQDs showed effective fluorescent for the selective and sensitive detection (sensor) of NH₃ with a detection limit of 10 nM. Thus, the presented procedure is a simple, low-cost, efficient, chemical-free synthesis of CQDs and can be applied as selective and sensitive (sensor) monitoring of NH₃ concentration in aquatic environmental samples.

Highly sensitive and selective detection of butachlor based on the resonance light scattering of doped carbon quantum dots

In this work, a new method of resonance light scattering was developed for the sensitive and selective detection of butachlor. Firstly, buckwheat was used as the main carbon source to prepare a new type of doped carbon quantum dot using the hydrothermal method. A new method for the determination of butachlor was then established by the change in resonance light scattering intensity after the addition of butachlor into the doped carbon quantum dot solution. The detection effect was successfully optimized by investigating the optimum reaction conditions. Under the optimum conditions, the resonance light scattering intensity of doped carbon quantum dots was greatly enhanced at 460 nm after the addition of butachlor, and the intensity changes were linearly correlated with the butachlor concentration in the range of 1-7 μg L^-1. The detection limit was 0.136 μg L^-1, and the recoveries ranged between 98.6% and 101.8%. This method was also used for butachlor detection in environmental water.

Nitrogen-Doped Carbon Dot and CdTe Quantum Dot Dual-Color Multifunctional Fluorescent Sensing Platform: Sensing Behavior and Glucose and pH Detection

A novel fluorescent probe based on a nitrogen-doped carbon dot (N-CD) and CdTe quantum dot (CdTe QD) platform has been constructed for H₂O₂/glucose detection and pH sensing. In this work, H₂O₂-tolerant blue fluorescence N-CDs were added to the H₂O₂-mediated yellow fluorescence quenching of CdTe QDs to construct a dual-color ratiometric fluorescent H₂O₂ probe. H₂O₂-induced passivated group detachment and action on deep nanocrystals promoted CdTe QD fluorescence quenching. Meanwhile, the addition of the blue fluorescent background of N-CDs sharply reflected the color change in CdTe QDs. Under the optimized experimental conditions, the platform was effectively applied to the detection of H₂O₂ produced by the enzymatic reaction of glucose, showing high sensitivity (limit of detection 7.86 μM) and wide linear range (26-900 μM) for glucose detection. The pH-sensing behavior of CdTe QDs and N-CDs was attributed to the displacement of a weak acid (3-mercaptopropionic acid) by a strong acid (HCl) and the acid titration process of two coexisting bases (N-CDs and NH₃·H₂O), respectively. The loss of passivation and doping effects led to a decrease in the fluorescence intensity of CdTe QDs and N-CDs. Moreover, utilizing the ability of bimaterial system fluorescence to pH sensing, a semiquantitative pH detection based on the linear response was developed. The pH range was analyzed by three kinds of N-CD (F_ex = 440 nm) and CdTe QD (F_ex = 548 nm) typical emission spectral shapes. In addition, the recovery results showed that the bimaterial system was proved to be appropriate for the assay of glucose in spiked serum samples.

A Chelation-enhanced Fluorescence Assay using Thiourea Capped Carbonaceous Fluorescent Nanoparticles for As (III) Detection in Water Samples

Herein, we designed a sensitive and selective "Turn-On" fluorescence nanosensor using water-soluble carbonaceous fluorescent nanomaterials (CFNs) functionalized with thiourea (CFNs-Thiourea) for efficient detection of trace concentrations of arsenic (III) in aqueous samples. The CFNs and CFNs-Thiourea were characterized by transmission electron microscopy (TEM), UV-visible spectroscopy (UV-vis) and fourier transformed infrared spectroscopy (FTIR). The emission peak intensity of proposed nanosensor at 425 nm was gradually enhanced on arsenite addition in a wide detection range (3.3-828.5 µg L^-1) attributed to the binding of arsenite species with sulfur groups of CFNs-Thiourea. The limit of detection (LOD) was 0.48 µg L^-1 being much lower than the World Health Organization (WHO) recommended threshold value of 10 µg L^-1. Furthermore, the as-prepared CFNs-Thiourea exhibited a superb selectivity for As (III) compared to various cations and anions, such as; NO₃^-, NO₂^-, F^-, Ni²⁺, Fe³⁺, Cu²⁺, Ca²⁺, Mg²⁺, Zn²⁺, Fe²⁺, Hg²⁺, Pb²⁺, F^-, Cl^-, Mn²⁺, Cr³⁺, Co²⁺, Cd²⁺, Bi³⁺, Al³⁺ and As (V) at 100 folds concentration of As (III). The turn on fluorescence nanosensor was successfully exploited for quantification of arsenic in spiked water samples with acceptable efficiencies.

A highly selective quinolizinium-based fluorescent probe for cysteine detection

A novel fluorescent quinolizinium-based turn-off probe has been developed for selective detection of cysteine. The probe showed high selectivity and sensitivity towards cysteine over other amino acids including the similarly structured homocysteine and glutathione with a detection limit of 0.18 μM (S/N = 3). It was successfully applied to cysteine detection in living cells with low cytotoxicity and quantitative analysis of spiked mouse serum samples with moderate to good recovery (96-109%).

Multicolor Phenylenediamine Carbon Dots for Metal-Ion Detection with Picomolar Sensitivity

Carbon dots keep attracting attention in multidisciplinary fields, motivating the development of new compounds. Phenylenediamine C6H4(NH2)2 dots are known to exhibit colorful emission, which depends on size, composition, and the functional surface groups, forming those structures. While quite a few fabrication protocols have been developed, the quantum yield of phenylenediamine dots still does not exceed 50% owing to undesired fragment formation during carbonization. Here, we demonstrate that an ethylene glycol-based environment allows obtaining multicolor high-quantum-yield phenylenediamine carbon dots. In particular, a kinetic realization of solvothermal synthesis in acidic environments enhances carbonization reaction yield for meta phenylenediamine compounds and leads to quantum yields, exciting 60%. Reaction yield after the product's purification approaches 90%. Furthermore, proximity of metal ions (Nd3+, Co3+, La3+) can either enhance or quench the emission, depending on the concentration. Optical monitoring of the solution allows performing an accurate detection of ions at picomolar concentrations. An atomistic model of carbon dots was developed to confirm that the functional surface group positioning within the molecular structure has a major impact on dots' physicochemical properties. The high performance of new carbon dots paves the way toward their integration in numerous applications, including imaging, sensing, and therapeutics.

Fate, cytotoxicity and cellular metabolomic impact of ingested nanoscale carbon dots using simulated digestion and a triculture small intestinal epithelial model

Carbon dots (CDs) are a promising material currently being explored in many industrial applications in the biomedical and agri-food areas; however, studies supporting the environmental health risk assessment of CDs are needed. This study focuses on various CD forms including iron (FeCD) and copper (CuCD) doped CDs synthesized using hydrothermal method, their fate in gastrointestinal tract, and their cytotoxicity and potential changes to cellular metabolome in a triculture small intestinal epithelial model. Physicochemical characterization revealed that 75% of Fe in FeCD and 95% of Cu in CuCD were dissolved during digestion. No significant toxic effects were observed for pristine CDs and FeCDs. However, CuCD induced significant dose-dependent toxic effects including decreases in TEER and cell viability, increases in cytotoxicity and ROS production, and alterations in important metabolites, including D-glucose, L-cysteine, uridine, citric acid and multiple fatty acids. These results support the current understanding that pristine CDs are relatively non-toxic and the cytotoxicity is dependent on the doping molecules.

A one-pot synthesis of fluorescent N,P-codoped carbon dots for vitamin B12 determination and bioimaging application

N,P-codoped carbon dots were synthesised using l-arginine and phosphoric acid and explored for the detection of vitamin B₁₂ (VB₁₂) and bioimaging.

On-off Fluorescent Switching of Excitation-independent Near-ultraviolet Emission Carbon Nanobelts for Ultrasensitive Detection Nimesulide in Pharmaceutical Tablet

Here, we present an excellent strategy of unmodified near-ultraviolet fluorescence nitrogen doping carbon nanobelts (NFNCBs) for detecting nimesulide (Nim). After a simple hydrothermal process of uric acid and hydroquinone in DMF solvent, NFNCBs shows the shape of corroded stalactite-like composed of nanobelts aggregates, near-ultraviolet luminescence and a narrowed full width at half maximum. This could improve/change the electronic properties and surface chemical active site, as the result of a sensitive response to Nim. By employing this sensor, the quantitative measurement displays a linear range of 2.0 nM - 100.0 μM with a lower detection limit of 0.21 nM (3σ/k) for Nim. Our work has provided a high selectivity for Nim, which may be capable for pharmaceutical sample analysis in real tablets. Furthermore, the results concerning the recoveries (96.3 - 106.2%) for real sample analysis indicate that this nanoprobe might expand a good avenue to design an effective luminescence nanoprobe for other biologically related drugs.

Phosphorus-Doped Carbon Quantum Dots as Fluorometric Probes for Iron Detection

Carbon quantum dots (CQDs), a novel fluorescent nanomaterial, have been extensively employed/explored in various applications, that is, biosensors, bioimaging, nanomedicine, therapeutics, photocatalysis, electrocatalysis, energy storage system, and so forth. In this study, we report the synthesis, characterization, and the application of phosphorus-doped CQDs (PCQDs), synthesized using trisodium citrate and phosphoric acid by the hydrothermal method. The effect of phosphorus doping on optical features and the formation of PCQDs have been explored elaborately by controlling the concentrations of precursors, reaction time, and the temperature. The fluorescent quantum yield for PCQDs was determined to be 16.1% at an excitation/emission wavelength of 310/440 nm. Also, the optical and structural properties of PCQDs were determined by using various spectroscopic and microscopic techniques. Static quenching of fluorescence was determined upon the addition of Fe3+ to PCQDs because of the formation of the fluorescent inactive complex (PCQDs-Fe3+). Hence, this chemistry leads to the development of a new fluorometric assay for the detection of Fe3+. The lower limit of Fe3+ detection is determined to be 9.5 nM (3σ/slope), with the linear fit from 20 nM to 3.0 μM (R 2 = 0.99). We have validated this new assay in the raw, ejected, and purified water samples of the RO plant by the standard addition method. These results suggest the possibility of developing a new commercial assay for Fe3+ detection in blood, urine, and various industrial waste and sewage water samples. Furthermore, recycling the pollutant water into the freshwater using filters that consist of PCQDs offers a great deal.

Synthesis of Carbon Dots by Varying Doped Elements and Application in Serine Detection

Carbon dots (CDs) with different doping elements were successfully synthesized via a simple hydrothermal strategy. 3-amino-4-chlorophenylboronic acid, 3-aminobenzeneboronic acid, aniline, and benzene were used as precursors, respectively. The B/N co-doping CDs (BNCDs) derived from 3-aminobenzeneboronic acid show brightest fluorescence among the CDs products with quantum yield at 0.15. The fluorescence of BNCDs exhibits good photostability and excitation-independent emission behavior. The bright blue emission of BNCDs can be quenched by serine, which is a kind of neutral aliphatic amino acid containing hyroxyl groups with polarity. It is possibly due to the molecular collision between excited state of BNCDs and the ground state of serine. BNCDs can be served as fluorophore probe for the assay of serine based on the efficient quenching effect. The approach for the determination of serine shows a high sensitivity with a detection limit at 0.14 nM, which is lower than those of previous works. Furthermore, the present BNCDs system can be employed to monitor serine in real food and biological samples. The strategy may be a potential way for the application in food safety and biomedicine fields.