Magnetic Lignosulfonate-Supported Pd Complex: Renewable Resource-Derived Catalyst for Aqueous Suzuki-Miyaura Reaction

Preparation of recyclable magnetic palladium nanocatalysts by dispersion strategy based on sodium alginate for reduction of p-nitrophenol and Suzuki-Miyaura coupling

Palladium (Pd) has excellent catalytic performance, its application is seriously limited by low atomic utilization and weak recovery capacity. To solve these problems, we report a universal palladium nanocatalysts preparation strategy by taking advantage of the rich chemistry of sodium alginate (SA). SA units not only self-assemble into a cross-linked porous carboxyl and hydroxyl framework but also can coat different substrates. Benefiting from the distinguished chelation of SA, metallic nanocatalysts can be achieved. As a proof-of-concept demonstration, Pd loading on nano-Fe3O4 modified with SA and investigated their catalytic capabilities. The catalyst was Fe3O4 nanoparticles encapsulated by SA film loaded with 0.4 wt% of Pd. It has a particle size around 100 nm and has good superparamagnetism with a saturation strength of 76.26 emu/g. It exhibited good catalytic activity at TOF = 660 h-1 and TOF = 4311 h-1 in typical Suzuki-Miyaura coupling reaction and the reduction of p-nitrophenol, respectively, and showed appreciable recyclability in the test of recyclability. Thus, our findings demonstrate that recyclable magnetic palladium nanocatalysts have several attractive features, such as easy preparation, outstanding catalytic activity and reusability. This work lays the foundation for the preparation of palladium nanocatalysts and the potential application of SA in the field of catalysts.

Fe3O4-lignin@Pd-NPs: A highly active, stable and broad-spectrum nanocomposite for water treatment

In this work, we report an environmentally friendly renewable nanocomposite magnetic lignin-based palladium nanoparticles (Fe3O4-lignin@Pd-NPs) for efficient wastewater treatment by decorating palladium nanoparticles without using any toxic reducing agents on the magnetic lignin abstracted from Poplar. The structure of composite Fe3O4-lignin@Pd-NPs was unambiguously confirmed by XRD, SEM, TEM, EDS, FTIR, and Zeta potential. After systematic evaluation of the use and efficiency of the composite to remove toxic organic dyes in wastewater, some promising results were observed as follows: Fe3O4-lignin@Pd-NPs exhibits highly active and efficient performance in the removal of toxic methylene blue (MB) (up to 99.8 %) wastewater in 2 min at different concentrations of MB and different pH values. Moreover, except for toxic MB, the other organic dyes including Rhodamine B (RhB), Rhodamine 6G (Rh6G), and Methyl Orange (MO) can also be removed efficiently by the composite. Finally, the easily recovered composite Fe3O4-lignin@Pd-NPs exhibits well stability and reusability, and catalytic efficiency is maintained well after ten cycles. In conclusion, the lignin-based magnetism Pd composite exhibits powerful potential practical application in industrial wastewater treatment.

Stabilization of Palladium-Nanoparticle-Decorated Postsynthesis-Modified Zr-UiO-66 MOF as a Reusable Heterogeneous Catalyst in C-C Coupling Reaction

Here we prepared a highly efficient and reusable catalyst by a step-by-step postsynthesis modification of UiO-66-NH₂ metal-organic frameworks (MOFs) with nitrogen-rich organic ligands and used it as support for the preparation of UiO-66-NH₂@cyanuric chloride@2-aminopyrimidine/Pd_NPs. The catalytic performance's results of UiO-66-NH₂@cyanuric chloride@2-aminopyrimidine/PdNPs, UiO-66-NH₂/PdNPs, and UiO-66-NH₂@cyanuric chloride/PdNPs indicate high efficiency of the modulation of the microenvironment of the palladium NPs. The addition of N-rich organic ligands through postsynthesis modification caused a unique structure of the final composite in favor of the progress of the C-C coupling reaction. Various techniques, including FT-IR, XRD, SEM, TEM, EDS, and elemental mapping, were used to characterize UiO-66-NH₂@cyanuric chloride@2-aminopyrimidine/Pd_NPs, indicating its successful preparation. Three C-C coupling reactions, including the Suzuki, Heck, and Sonogashira coupling reactions, were promoted using the produced catalyst. As a result of the postsynthesis modification (PSM), the proposed catalyst displays improved catalytic performance. In addition, the suggested catalyst was highly recyclable up to ten times without leaching of PdNPs.

Novel lignin-supported copper complex as a highly efficient and recyclable nanocatalyst for Ullmann reaction

In this work, we prepared polyhydroxylated lignin by demethylation and hydroxylation of lignin, and grafted phosphorus-containing groups by nucleophilic substitution reaction, the resulting material could be used as a carrier for the preparation of heterogeneous Cu-based catalysts (PHL-CuI-OPR₂). The optimal PHL-CuI-OP^tBu₂ catalyst was characterized by FT-IR, TGA, BET, XRD, SEM-EDS, ICP-OES, XPS. The catalytic performance of PHL-CuI-OP^tBu₂ in the Ullmann CN coupling reaction was evaluated using iodobenzene and nitroindole as model substrates under nitrogen atmosphere with DME and H₂O as cosolvent at 95 °C for 24 h. The applicability of modified lignin-supported copper catalyst was investigated of various aryl/heteroaryl halides with indoles under optimal conditions, the corresponding products were obtained with high yield. Additionally, it could be easily recovered from the reaction medium by an easy centrifugation and washing.

Lignin-based carbon fibers: Insight into structural evolution from lignin pretreatment, fiber forming, to pre-oxidation and carbonization

Lignin remains the second abundant source of renewable carbon with an aromatic structure. However, most of the lignin is burnt directly for power generation, with an effective utilization rate of <2 %, making value addition on lignin an urgent requirement. From this perspective, preparation of lignin-based carbon fibers has been widely studied as an effective way to increase value addition on lignin. However, lignin species are diverse and complex in structure, and the pathway that enables changes in lignin structure during pretreatment, fiber formation, stabilization, and carbonization is still uncertain. In this review, we condense the common structural evolution route from the previous studies, which can serve as a guide towards engineered lignin carbon fibers with high performance properties.

Proof of Concept: Interface of Recyclable Organogels with Embedded Palladium Nanoparticles Catalyzing Suzuki-Miyaura Coupling in Water at Room Temperature

A sustainable approach for C-C cross-coupling reaction at room temperature in water has been developed to avoid tedious Pd separation, reduce the carbon footprint, and save energy. Another important aspect is the catalyst recycling and easy product separation. α,γ-Hybrid peptides were designed to selectively use as a ligand for C-C cross-coupling catalysts as well as to form organogels. The peptides form antiparallel sheet-like structures in the solid state. The peptide containing m-aminobenzoic acid, glycine, and dimethylamine forms a whitish gel in toluene, and co-gelation with Pd(OAc)₂ results in light brown gel, which acts as a biphasic catalyst for Suzuki-Miyaura cross-coupling at room temperature in water by mild shaking. The organic-inorganic hybrid gel was characterized by rheology, field-emission scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray analyses. On completion of the cross-coupling reaction, the basic aqueous layer (containing products) above the gel can be simply decanted and the intact organic-inorganic hybrid gel can be recycled by topping-up fresh reactants multiple times. The reaction permitted a range of different substitution patterns for aryl and heterocyclic halides with acid or phenol functional groups. Both electron-donating- and electron-withdrawing-substituted substrates exhibited good results for this transformation. The findings inspire toward a holistic green technology for Suzuki-Miyaura coupling reaction and an innovative avenue for catalyst recycling and product isolation.

Dendritic structured palladium complexes: magnetically retrievable, highly efficient heterogeneous nanocatalyst for Suzuki and Heck cross-coupling reactions

The recyclable nanomagnetic Pd-complex PAMAM G₀-Pd@γ-Fe₂O₃ is reported for catalytic C–C cross-coupling reactions of challenging substrates. Mainly, a great variety of aryl chlorides can be used as substrates for Suzuki–Miyaura and Mizoroki–Heck reactions under mild reaction conditions (60–90 °C) and low catalyst loading (<1 mol% Pd) in aqueous media. The presence of numerous polar groups in the polymer matrix increases the solubility of the catalyst in water, thus facilitating its operation in aqueous environments. The immobilization of the catalyst on the surface of a magnetic platform allows its effective recovery and reuse without significant loss of catalytic activity for at least six cycles with total leaching of <1% palladium metal, meeting the requirements for acceptable metal residues in the pharmaceutical industry.

The recyclable nanomagnetic Pd-complex PAMAM G₀-Pd@γ-Fe₂O₃ is reported for catalytic C–C cross-coupling reactions of challenging substrates.

Wood-Sourced Polymers as Support for Catalysis by Group 10 Transition Metals

Despite providing interesting solutions to reduce the number of synthetic steps, to decrease energy consumption or to generate less waste, therefore contributing to a more sustainable way of producing important chemicals, the expansion of the use of homogeneous catalysis in industrial processes is hampered by several drawbacks. One of the most important is the difficulty to recycle the noble metals generating potential high costs and pollution of the synthesized products by metal traces detrimental to their applications. Supporting the metals on abundant and cheap biosourced polymers has recently appeared as an almost ideal solution: They are much easier to recover from the reaction medium and usually maintain high catalytic activity. The present bibliographical review focuses on the development of catalysts based on group 10 transition metals (nickel, palladium, platinum) supported on biopolymers obtained from wood, such as cellulose, hemicellulose, lignin, and their derivatives. The applications of these catalysts in organic synthesis or depollution are also addressed in this review with examples of C-C couplings, oxidation, or hydrogenation reactions.

Recent advances of lignin valorization techniques toward sustainable aromatics and potential benchmarks to fossil refinery products

Aromatic compounds are important fuels and key chemical precursors for organic synthesis, however the current aromatics market are mainly relying on fossil resources which will eventually contribute to carbon emissions. Lignin has been recognized as a drop-in substitution to conventional aromatics, with its values gradually realized after tremendous research efforts in the recent five years. To facilitate the development of a possible lignin economics, this study overviewed the recent advances of various biorefinery techniques and the remaining challenging for lignin valorization. Starting with recent discovery of unexplored lignin structures, the potential functions of lignin related chemical structures were emphasized. The important breakthrough of lignin-first pretreatment, catalytic lignin depolymerization, and the high value products with possible benchmark with modern aromatics were reviewed with possible future targets. Possible retrofit of conventional petroleum refinery for lignin products were also introduced and hopefully paving a way to progressively migrate the industry towards carbon neutrality.

Pd immobilization biguanidine modified Zr-UiO-66 MOF as a reusable heterogeneous catalyst in Suzuki-Miyaura coupling

In recent days, nanohybrid metal organic frameworks (MOF) have been considered as next generation catalysts due to their unique features like large surface to volume ratio, tailorable geometry, uniform pore sizes and homogeneous distribution of active sites. In this report, we address the biguanidine modified 3D Zr-centred MOF UiO-66-NH2 following a post synthetic modification approach. Utilizing the excellent chelating ability of biguanidine, Pd ions are immobilized over the host matrix MOF. The as-synthesized material was physicochemically characterized using a broad range of analytical techniques like FT-IR, electron microscopy, EDS, elemental mapping, XRD and ICP-OES. Subsequently the material has been catalytically employed in the classical Suzuki-Miyaura coupling towards the synthesis of diverse biphenyl derivatives at sustainable conditions. There are very few reports on the covalently modified MOFs towards the organic coupling reactions. The catalyst has been isolated by centrifugation and recycled in 9 consecutive runs with almost insignificant leaching and minute decrease in reactivity.

Novel magnetic lignosulfonate-supported Pd complex as an efficient nanocatalyst for N-arylation of 4-methylbenzenesulfonamide

This study presents a novel, economical, and environmentally technique for synthesizing magnetic palladium complex conjugated to activated calcium lignosulfonate with triethylenetetramine (Fe₃O₄@lignosulfonate@triethylenetetramine@Pd complex (FLT-Pd complex)) as a practical and air-stable catalyst. FLT-Pd complex is used as a catalyst for the fabrication of 4-methyl-N-phenyl-benzenesulfonamide derivatives via N-arylation of 4-methylbenzenesulfonamide in good yields. Furthermore, because of the complex magnetic reparability and high stability, it could be removed easily from the reaction media using a magnet and reused 5 cycles without a remarkable loss of catalytic prowess.

Bio-inspired synthesis of palladium nanoparticles fabricated magnetic Fe3O4 nanocomposite over Fritillaria imperialis flower extract as an efficient recyclable catalyst for the reduction of nitroarenes

This current research is based on a bio-inspired procedure for the synthesis of biomolecule functionalized hybrid magnetic nanocomposite with the Fe3O4 NPs at core and Pd NPs at outer shell. The central idea was the initial modification of magnetic NP by the phytochemicals from Fritillaria imperialis flower extract, which was further exploited in the green reduction of Pd2+ ions into Pd NPs, in situ. The flower extract also acted as a capping agent for the obtained Pd/Fe3O4 composite without the need of additional toxic reagents. The as-synthesized Fe3O4@Fritillaria/Pd nanocomposite was methodically characterized over different physicochemical measures like FT-IR, ICP-AES, FESEM, EDX, TEM, XPS and VSM analysis. Thereafter, its catalytic potential was evaluated in the reduction of various nitrobenzenes to arylamines applying hydrazine hydrate as reductant in ethanol/water (1:2) medium under mild conditions. Furthermore, the nanocatalyst was retrieved using a bar magnet and recycled several times without considerable leaching or loss of activity. This green, bio-inspired ligand-free protocol has remarkable advantages like environmental friendliness, high yields, easy workup and reusability of the catalyst.

Ultrasound assisted synthesis of Pd NPs decorated chitosan-starch functionalized Fe3O4 nanocomposite catalyst towards Suzuki-Miyaura coupling and reduction of 4-nitrophenol

In recent days the nanomagnetic biocomposites have been evolved as sustainable green catalysts. In that context, we are prompted to design and synthesize a novel Pd NP adorned chitosan-starch dual biopolymer encapsulated core-shell type magnetic nanocomposite (Fe₃O₄@CS-Starch/Pd) in an eco-friendly pathway applying ultrasound irradiations. The morphological and physicochemical features of the material were determined using several advanced techniques like FT-IR, FESEM, HRTEM, EDX, atomic mapping, VSM, XRD and ICP-OES. Catalytic efficiency of the material was investigated in the ultrasound assisted classical Suzuki-Miyaura coupling towards the synthesis of diverse range of biaryl derivatives and in the catalytic reduction of 4-Nitrophenol.In both the protocols the catalyst exhibited excellent performances. Sonication had a significant role in enhancing the catalytic performances in both the reactions as compared to conventional heating. Due to super-paramagnetism, the catalyst was easily magnetically isolable and reused in 11 cycles without considerable leaching and change in reactivity.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Incorporation of homogeneous organometallic catalysts into metal–organic frameworks for advanced heterogenization: a review

The heterogenization of homogeneous organometallic catalysts by incorporation into MOFs using different strategies, MOF selection, OMC selection, and the use of hybrid heterogeneous catalysts OMC@MOFs in catalytic applications are summarized and discussed.

Electrochemical coupling halobenzene into biphenyl on a reusable Pd nanoparticle-coated carbon-paper electrode at ambient conditions

Electrochemical homo-coupling halobenzene into biphenyl compounds on the Pd/C surface.

Ligand Steric Effects of α-Diimine Nickel(II) and Palladium(II) Complexes in the Suzuki-Miyaura Cross-Coupling Reaction

Nickel catalysts represent a low cost and environmentally friendly alternative to palladium-based catalytic systems for Suzuki-Miyaura cross-coupling (SMC) reactions. However, nickel catalysts have suffered from poor air, moisture, and thermal stabilities, especially at high catalyst loading, requiring controlled reaction conditions. In this report, we examine a family of mono- and dinuclear Ni(II) and Pd(II) complexes with a diverse and versatile α-diimine ligand environment for SMC reactions. To evaluate the ligand steric effects, including the bite angle in the reaction outcomes, the structural variation of the complexes was achieved by incorporating iminopyridine- and acenaphthene-based ligands. Moreover, the impact of substrate bulkiness was investigated by reacting various aryl bromides with phenylboronic acid, 2-naphthylboronic acid, and 9-phenanthracenylboronic acid. Yields were the best with the dinuclear complex, being nearly quantitative (93-99%), followed by the mononuclear complexes, giving yields of 78-98%. Consequently, α-diimine-based ligands have the potential to deliver Ni-based systems as sustainable catalysts in SMC.

Lignin-Inorganic Interfaces: Chemistry and Applications from Adsorbents to Catalysts and Energy Storage Materials

Lignin is one the most fascinating natural polymers due to its complex aromatic-aliphatic structure. Phenolic hydroxyl and carboxyl groups along with other functional groups provide technical lignins with reactivity and amphiphilic character. Many different lignins have been used as functional agents to facilitate the synthesis and stabilization of inorganic materials. Herein, the use of lignin in the synthesis and chemistry of inorganic materials in selected applications with relevance to sustainable energy and environmental fields is reviewed. In essence, the combination of lignin and inorganic materials creates an interface between soft and hard materials. In many cases it is either this interface or the external lignin surface that provides functionality to the hybrid and composite materials. This Minireview closes with an overview on future directions for this research field that bridges inorganic and lignin materials for a more sustainable future.

Design and Fabrication of a Magnetite-based Polymer-supported Hybrid Nanocomposite: A Promising Heterogeneous Catalytic System Utilized in Known Palladium-assisted Coupling Reactions

Objective:

Herein, a novel heterogeneous catalytic system constructed of iron oxide and palladium nanoparticles is presented. Firstly, a convenient synthetic pathway for the preparation of this catalytic system is introduced, then the application of the fabricated nanocomposite in the Pd-catalyzed C─C coupling reactions is monitored. High reaction yields (98%) have been obtained in short reaction time, by using this catalytic system.

Materials and Methods:

Fe3O4/P4VP-Pd catalytic system was fabricated via an in situ method by 4- vinylpyridine (4-VP). In this regard, all the essential structural analyses such as FT-IR, EDX, VSM, and TGA have been performed on the Fe3O4/P4VP-Pd catalytic system to investigate its properties. The spherical morphology of the NPs and their uniform size have also been studied by the SEM method. Further, the reaction progress was controlled by thin-layer chromatography. Finally, NMR analysis was used to identify the synthesized biphenyl pharmaceutical derivatives.

Results:

High efficiency of this catalytic system has been precisely investigated and the optimal conditions were determined. The catalytic process is carried out in 20 min, under mild conditions (room temperature). Then, the purification process is easily performed via magnetic separation of the catalyst NPs. After completion of the synthesis reaction, the NPs were collected, washed, and reused several times.

Conclusion:

Among recently reported heterogeneous catalytic systems, Fe3O4/P4VP-Pd is recommended due to its high catalytic performance, convenience of the preparation process, excellent biocompatibility, economic benefits, and well reusability. Overall, in order to save time in the complex synthetic processes and also prevent using so many chemical reagents and solvents for the purification process, the presented catalytic system could be suitable for scaling up and applying for the industrial applications.